ramips: update WLAN MAC address of ipTIME A3004T

Reported MAC addresses:

| interface |    MAC address    |     source     | comment
|-----------|-------------------|----------------|---------
|       LAN | 90:xx:xx:18:xx:1F |                | [1]
|       WAN | 90:xx:xx:18:xx:1D |                |
|   WLAN 2G | 92:xx:xx:48:xx:1C |                |
|   WLAN 5G | 90:xx:xx:18:xx:1C | factory 0x4    |
|           | 90:xx:xx:18:xx:1C | config ethaddr |

[1] Used in this patch as WLAN 2G MAC address with the local bit set

Signed-off-by: Sungbo Eo <mans0n@gorani.run>

diff --git a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
index c5e6b6c89b47370d2dc1b96d7c181c65332b60f6..e3b79e1699f1139af149b547a433209fc4711a11 100644 (file)
--- a/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
+++ b/target/linux/ramips/mt7621/base-files/etc/hotplug.d/ieee80211/10_fix_wifi_mac
@@ -25,6 +25,12 @@ case "$board" in
                [ "$PHYNBR" = "1" ] && \
                        macaddr_add "$(mtd_get_mac_binary factory 0x4)" 1 > /sys${DEVPATH}/macaddress
                ;;
+       iptime,a3004t)
+               hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"
+               [ "$PHYNBR" = "0" ] && \
+                       macaddr_setbit_la "$(macaddr_add $hw_mac_addr 3)" > /sys${DEVPATH}/macaddress
+               [ "$PHYNBR" = "1" ] && echo -n "$hw_mac_addr" > /sys${DEVPATH}/macaddress
+               ;;
        iptime,ax2004m)
                if [ "$PHYNBR" = "1" ]; then
                        hw_mac_addr="$(mtd_get_mac_binary factory 0x4)"