ar71xx: Support for Ubiquiti UniFi AP AC LITE
authorJohn Crispin <john@openwrt.org>
Fri, 12 Feb 2016 08:31:32 +0000 (08:31 +0000)
committerJohn Crispin <john@openwrt.org>
Fri, 12 Feb 2016 08:31:32 +0000 (08:31 +0000)
Add support for the Ubiquiti UniFi AP AC LITE
Signed-off-by: P.Wassi <p.wassi at gmx.at>
SVN-Revision: 48711

13 files changed:
target/linux/ar71xx/base-files/etc/board.d/02_network
target/linux/ar71xx/base-files/etc/diag.sh
target/linux/ar71xx/base-files/etc/hotplug.d/firmware/11-ath10k-caldata
target/linux/ar71xx/base-files/lib/ar71xx.sh
target/linux/ar71xx/base-files/lib/upgrade/platform.sh
target/linux/ar71xx/files/arch/mips/ath79/Kconfig.openwrt
target/linux/ar71xx/files/arch/mips/ath79/Makefile
target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c [new file with mode: 0644]
target/linux/ar71xx/files/arch/mips/ath79/machtypes.h
target/linux/ar71xx/generic/profiles/ubnt.mk
target/linux/ar71xx/image/Makefile
target/linux/ar71xx/mikrotik/config-default
target/linux/ar71xx/nand/config-default

index e12367c..799d98e 100755 (executable)
@@ -360,6 +360,7 @@ tl-wa901nd-v2 |\
 tl-wa901nd-v3 |\
 tl-wr703n |\
 tube2h |\
+unifiac |\
 wndap360 |\
 mynet-rext |\
 wp543)
index c0e73ad..1971b84 100644 (file)
@@ -339,7 +339,8 @@ get_status_led() {
        unifi)
                status_led="ubnt:green:dome"
                ;;
-       uap-pro)
+       uap-pro | \
+       unifiac)
                status_led="ubnt:white:dome"
                ;;
        unifi-outdoor-plus)
index 74c3417..e6fcec8 100644 (file)
@@ -75,6 +75,9 @@ case "$FIRMWARE" in
                ath10kcal_extract "ART" 20480 2116
                ath10kcal_patch_mac $(macaddr_add $(cat /sys/class/net/eth0/address) +16)
                ;;
+       unifiac)
+               ath10kcal_extract "EEPROM" 20480 2116
+               ;;
        esac
        ;;
 "ath10k/cal-pci-0000:01:00.0.bin")
index e5b7fec..3203273 100755 (executable)
@@ -908,6 +908,9 @@ ar71xx_board_detect() {
        *UniFi)
                name="unifi"
                ;;
+       *"UniFi-AC")
+               name="unifiac"
+               ;;
        *"UniFi AP Pro")
                name="uap-pro"
                ;;
index 0276a69..8a70502 100755 (executable)
@@ -263,6 +263,7 @@ platform_check_image() {
        wlae-ag300n | \
        nbg460n_550n_550nh | \
        unifi | \
+       unifiac | \
        unifi-outdoor | \
        carambola2 | \
        weio )
index 069d338..3d6dc4d 100644 (file)
@@ -1356,6 +1356,16 @@ config ATH79_MACH_UBNT
        select ATH79_DEV_M25P80
        select ATH79_DEV_USB
 
+config ATH79_MACH_UBNT_UNIFIAC
+       bool "Ubiquiti UniFi AC (LITE) support"
+       select SOC_QCA956X
+       select ATH79_DEV_AP9X_PCI if PCI
+       select ATH79_DEV_ETH
+       select ATH79_DEV_GPIO_BUTTONS
+       select ATH79_DEV_LEDS_GPIO
+       select ATH79_DEV_M25P80
+       select ATH79_DEV_WMAC
+
 config ATH79_MACH_WEIO
        bool "WeIO board"
        select SOC_AR933X
index ac82a63..c1bbee1 100644 (file)
@@ -166,6 +166,7 @@ obj-$(CONFIG_ATH79_MACH_TL_WR720N_V3)       += mach-tl-wr720n-v3.o
 obj-$(CONFIG_ATH79_MACH_TUBE2H)                += mach-tube2h.o
 obj-$(CONFIG_ATH79_MACH_UBNT)          += mach-ubnt.o
 obj-$(CONFIG_ATH79_MACH_UBNT_XM)       += mach-ubnt-xm.o
+obj-$(CONFIG_ATH79_MACH_UBNT_UNIFIAC)  += mach-ubnt-unifiac.o
 obj-$(CONFIG_ATH79_MACH_WEIO)          += mach-weio.o
 obj-$(CONFIG_ATH79_MACH_WHR_HP_G300N)  += mach-whr-hp-g300n.o
 obj-$(CONFIG_ATH79_MACH_WLAE_AG300N)   += mach-wlae-ag300n.o
diff --git a/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c b/target/linux/ar71xx/files/arch/mips/ath79/mach-ubnt-unifiac.c
new file mode 100644 (file)
index 0000000..3617ca7
--- /dev/null
@@ -0,0 +1,109 @@
+/*
+ *  Ubiquiti UniFi AC (LITE) board support
+ *
+ *  Copyright (C) 2015-2016 P. Wassi <p.wassi at gmx.at>
+ *
+ *  Derived from: mach-ubnt-xm.c
+ *
+ *  This program is free software; you can redistribute it and/or modify it
+ *  under the terms of the GNU General Public License version 2 as published
+ *  by the Free Software Foundation.
+ */
+
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/platform_device.h>
+#include <linux/ath9k_platform.h>
+#include <linux/etherdevice.h>
+
+#include <asm/mach-ath79/ath79.h>
+#include <asm/mach-ath79/irq.h>
+#include <asm/mach-ath79/ar71xx_regs.h>
+
+#include <linux/platform_data/phy-at803x.h>
+
+#include "common.h"
+#include "dev-ap9x-pci.h"
+#include "dev-eth.h"
+#include "dev-gpio-buttons.h"
+#include "dev-leds-gpio.h"
+#include "dev-m25p80.h"
+#include "dev-wmac.h"
+#include "machtypes.h"
+
+
+#define UNIFIAC_KEYS_POLL_INTERVAL     20
+#define UNIFIAC_KEYS_DEBOUNCE_INTERVAL (3 * UNIFIAC_KEYS_POLL_INTERVAL)
+
+#define UNIFIAC_GPIO_LED_WHITE         7
+#define UNIFIAC_GPIO_LED_BLUE          8
+
+#define UNIFIAC_GPIO_BTN_RESET         2
+
+#define UNIFIAC_MAC0_OFFSET             0x0000
+#define UNIFIAC_WMAC_CALDATA_OFFSET     0x1000
+#define UNIFIAC_PCI_CALDATA_OFFSET      0x5000
+
+
+static struct flash_platform_data ubnt_unifiac_flash_data = {
+       /* mx25l12805d and mx25l12835f have the same JEDEC ID */
+       .type = "mx25l12805d",
+};
+
+static struct gpio_led ubnt_unifiac_leds_gpio[] __initdata = {
+       {
+               .name           = "ubnt:white:dome",
+               .gpio           = UNIFIAC_GPIO_LED_WHITE,
+               .active_low     = 0,
+       }, {
+               .name           = "ubnt:blue:dome",
+               .gpio           = UNIFIAC_GPIO_LED_BLUE,
+               .active_low     = 0,
+       }
+};
+
+static struct gpio_keys_button ubnt_unifiac_gpio_keys[] __initdata = {
+       {
+               .desc                   = "reset",
+               .type                   = EV_KEY,
+               .code                   = KEY_RESTART,
+               .debounce_interval      = UNIFIAC_KEYS_DEBOUNCE_INTERVAL,
+               .gpio                   = UNIFIAC_GPIO_BTN_RESET,
+               .active_low             = 1,
+       }
+};
+
+static void __init ubnt_unifiac_setup(void)
+{
+       u8 *eeprom = (u8 *) KSEG1ADDR(0x1fff0000);
+
+       ath79_register_m25p80(&ubnt_unifiac_flash_data);
+
+
+       ath79_init_mac(ath79_eth0_data.mac_addr,
+                      eeprom + UNIFIAC_MAC0_OFFSET, 0);
+
+       ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
+       ath79_eth0_data.phy_mask = BIT(4);
+       ath79_eth0_pll_data.pll_10 = 0x00001313;
+
+       ath79_register_mdio(0, ~BIT(4));
+       ath79_register_eth(0);
+
+
+       ath79_register_wmac(eeprom + UNIFIAC_WMAC_CALDATA_OFFSET, NULL);
+
+
+       ap91_pci_init(eeprom + UNIFIAC_PCI_CALDATA_OFFSET, NULL);
+
+
+       ath79_register_leds_gpio(-1, ARRAY_SIZE(ubnt_unifiac_leds_gpio),
+                                ubnt_unifiac_leds_gpio);
+
+       ath79_register_gpio_keys_polled(-1, UNIFIAC_KEYS_POLL_INTERVAL,
+                                        ARRAY_SIZE(ubnt_unifiac_gpio_keys),
+                                        ubnt_unifiac_gpio_keys);
+}
+
+MIPS_MACHINE(ATH79_MACH_UBNT_UNIFIAC, "UBNT-UF-AC", "Ubiquiti UniFi-AC",
+            ubnt_unifiac_setup);
index ad255bd..97de9f0 100644 (file)
@@ -211,6 +211,7 @@ enum ath79_mach_type {
        ATH79_MACH_UBNT_RS,             /* Ubiquiti RouterStation */
        ATH79_MACH_UBNT_UAP_PRO,        /* Ubiquiti UniFi AP Pro */
        ATH79_MACH_UBNT_UNIFI,          /* Ubiquiti Unifi */
+       ATH79_MACH_UBNT_UNIFIAC,        /* Ubiquiti Unifi AC */
        ATH79_MACH_UBNT_UNIFI_OUTDOOR,  /* Ubiquiti UnifiAP Outdoor */
        ATH79_MACH_UBNT_UNIFI_OUTDOOR_PLUS, /* Ubiquiti UnifiAP Outdoor+ */
        ATH79_MACH_UBNT_XM,             /* Ubiquiti Networks XM board rev 1.0 */
index d8e24d0..94eff18 100644 (file)
@@ -38,6 +38,17 @@ endef
 
 $(eval $(call Profile,UBNTUNIFI))
 
+define Profile/UBNTUNIFIAC
+       NAME:=Ubiquiti UniFi AP AC
+       PACKAGES:=kmod-ath10k ath10k-firmware-qca988x
+endef
+
+define Profile/UBNTUNIFIAC/Description
+       Package set optimized for the Ubiquiti UniFi AP AC.
+endef
+
+$(eval $(call Profile,UBNTUNIFIAC))
+
 define Profile/UBNTUNIFIOUTDOOR
        NAME:=Ubiquiti UniFiAP Outdoor
        PACKAGES:=
index 1bb0ac9..a770041 100644 (file)
@@ -1141,12 +1141,21 @@ define Device/ubnt-unifi
   DEVICE_PROFILE := UBNT UBNTUNIFI
 endef
 
+define Device/ubnt-unifiac
+  DEVICE_PROFILE := UBNT UBNTUNIFIAC
+  IMAGE_SIZE := 7744k
+  MTDPARTS = spi0.0:384k(u-boot)ro,64k(u-boot-env)ro,7744k(firmware),7744k(ubnt-airos)ro,128k(bs)ro,256k(cfg)ro,64k(EEPROM)ro
+  IMAGES := sysupgrade.bin
+  IMAGE/sysupgrade.bin = append-kernel $$$$(BLOCKSIZE) | append-rootfs | pad-rootfs | check-size $$$$(IMAGE_SIZE)
+  BOARDNAME := UBNT-UF-AC
+endef
+
 define Device/ubnt-unifi-outdoor
   $(Device/ubnt-bz)
   BOARDNAME := UBNT-U20
   DEVICE_PROFILE := UBNT UBNTUNIFIOUTDOOR
 endef
-TARGET_DEVICES += ubnt-unifi ubnt-unifi-outdoor
+TARGET_DEVICES += ubnt-unifi ubnt-unifiac ubnt-unifi-outdoor
 
 define Device/ubnt-nano-m-xw
   $(Device/ubnt-xw)
index 88ac6cf..ae5275d 100644 (file)
@@ -104,6 +104,7 @@ CONFIG_ATH79_MACH_RBSXTLITE=y
 # CONFIG_ATH79_MACH_TUBE2H is not set
 # CONFIG_ATH79_MACH_UBNT is not set
 # CONFIG_ATH79_MACH_UBNT_XM is not set
+# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
 # CONFIG_ATH79_MACH_WHR_HP_G300N is not set
 # CONFIG_ATH79_MACH_WLAE_AG300N is not set
 # CONFIG_ATH79_MACH_WLR8100 is not set
index e67d1ad..0eaa1e7 100644 (file)
@@ -63,6 +63,7 @@
 # CONFIG_ATH79_MACH_TL_WR941ND is not set
 # CONFIG_ATH79_MACH_UBNT is not set
 # CONFIG_ATH79_MACH_UBNT_XM is not set
+# CONFIG_ATH79_MACH_UBNT_UNIFIAC is not set
 # CONFIG_ATH79_MACH_WHR_HP_G300N is not set
 # CONFIG_ATH79_MACH_WLAE_AG300N is not set
 # CONFIG_ATH79_MACH_WNDAP360 is not set