ath79: add TP-Link TL-WR740N/ND v2 port
authorAlex Maclean <monkeh@monkeh.net>
Wed, 30 May 2018 13:18:53 +0000 (14:18 +0100)
committerJohn Crispin <john@phrozen.org>
Fri, 1 Jun 2018 06:23:14 +0000 (08:23 +0200)
Signed-off-by: Alex Maclean <monkeh@monkeh.net>
target/linux/ath79/base-files/etc/board.d/01_leds
target/linux/ath79/base-files/etc/board.d/02_network
target/linux/ath79/base-files/etc/hotplug.d/firmware/10-ath9k-eeprom
target/linux/ath79/dts/ar7240_tl-wr740n-v2.dts [new file with mode: 0644]
target/linux/ath79/image/tiny-tp-link.mk

index 70d27bc29b0d5b9c45f7b93d1db91c4c7960f9a2..76b025791964ee44350cb9be21b5ccdc6566d22a 100755 (executable)
@@ -21,6 +21,13 @@ case "$board" in
 "glinet,ar150")
        ucidef_set_led_wlan "wlan" "WLAN" "gl-ar150:orange:wlan" "phy0tpt"
        ;;
+"tplink,tl-wr740n-v2")
+       ucidef_set_led_netdev "wan" "WAN" "$boardname:green:wan" "eth0"
+       ucidef_set_led_switch "lan1" "LAN1" "$boardname:green:lan1" "switch0" "0x02"
+       ucidef_set_led_switch "lan2" "LAN2" "$boardname:green:lan2" "switch0" "0x04"
+       ucidef_set_led_switch "lan3" "LAN3" "$boardname:green:lan3" "switch0" "0x08"
+       ucidef_set_led_switch "lan4" "LAN4" "$boardname:green:lan4" "switch0" "0x10"
+       ;;
 "tplink,tl-wr1043nd-v1")
        ucidef_set_led_usbdev "usb" "USB" "tp-link:green:usb" "1-1"
        ucidef_set_led_wlan "wlan" "WLAN" "tp-link:green:wlan" "phy0tpt"
index c4f69a88025488506d983c3d40ae2ce28e5ff120..7dc90fcab768055a1fb72b4f5bcffdfa2ffba57d 100755 (executable)
@@ -23,6 +23,12 @@ ath79_setup_interfaces()
                        "0@eth0" "2:lan:1" "3:lan:2" "4:lan:3" "5:lan:4" "1:wan"
                ;;
 
+       "tplink,tl-wr740n-v2")
+               ucidef_set_interfaces_lan_wan "eth1.1" "eth0"
+               ucidef_add_switch "switch0" \
+                       "0@eth1" "1:lan" "2:lan" "3:lan" "4:lan"
+               ;;
+
        "tplink,tl-wr1043nd-v1")
                ucidef_add_switch "switch0" \
                        "1:lan" "2:lan" "3:lan" "4:lan" "0:wan" "5@eth0"
index c09dca11d7325b7bcf530d76da464e4953fd37a1..498cc4e6cb30ffb3d0662c99f6dd7e6045863c24 100644 (file)
@@ -54,6 +54,7 @@ case "$FIRMWARE" in
        "tplink,tl-wdr4300")
                ath9k_eeprom_extract "art" 20480 1088
                ;;
+       "tplink,tl-wr740n-v2"|\
        "ubnt,unifi")
                ath9k_eeprom_extract "art" 4096 2048
                ;;
diff --git a/target/linux/ath79/dts/ar7240_tl-wr740n-v2.dts b/target/linux/ath79/dts/ar7240_tl-wr740n-v2.dts
new file mode 100644 (file)
index 0000000..f86cb50
--- /dev/null
@@ -0,0 +1,174 @@
+// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+
+#include "ar7240.dtsi"
+
+/ {
+       compatible = "tplink,tl-wr740n-v2", "qca,ar7240";
+       model = "TP-Link TL-WR740N v2";
+
+       aliases {
+               led-status = &led_system;
+       };
+
+       memory@0 {
+               device_type = "memory";
+               reg = <0x0 0x2000000>;
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+
+               reset {
+                       label = "reset";
+                       linux,code = <KEY_RESTART>;
+                       gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+
+               wps {
+                       label = "wps";
+                       linux,code = <KEY_WPS_BUTTON>;
+                       gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
+                       debounce-interval = <60>;
+               };
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               pinctrl-names = "default";
+               pinctrl-0 = <&switch_led_pins>;
+
+               led_system: system {
+                       label = "tl-wr740n-v2:green:system";
+                       gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
+               };
+
+               lan1 {
+                       label = "tl-wr740n-v2:green:lan1";
+                       gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
+               };
+
+               lan2 {
+                       label = "tl-wr740n-v2:green:lan2";
+                       gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
+               };
+
+               lan3 {
+                       label = "tl-wr740n-v2:green:lan3";
+                       gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
+               };
+
+               lan4 {
+                       label = "tl-wr740n-v2:green:lan4";
+                       gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
+               };
+
+               wan {
+                       label = "tl-wr740n-v2:green:wan";
+                       gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
+               };
+
+               wlan {
+                       label = "tl-wr740n-v2:green:wlan";
+                       gpios = <&ath9k 1 GPIO_ACTIVE_LOW>;
+                       default-state = "off";
+                       linux,default-trigger = "phy0tpt";
+               };
+
+               wps {
+                       label = "tl-wr740n-v2:green:wps";
+                       gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+               };
+       };
+};
+
+&spi {
+       status = "okay";
+       num-cs = <1>;
+
+       flash@0 {
+               #address-cells = <1>;
+               #size-cells = <1>;
+               compatible = "jedec,spi-nor";
+               reg = <0>;
+               spi-max-frequency = <25000000>;
+
+               partitions {
+                       compatible = "fixed-partitions";
+                       #address-cells = <1>;
+                       #size-cells = <1>;
+
+                       uboot: partition@0 {
+                               reg = <0x0 0x20000>;
+                               label = "u-boot";
+                               read-only;
+                       };
+
+                       firmware: partition@20000 {
+                               reg = <0x20000 0x3d0000>;
+                               label = "firmware";
+                       };
+
+                       art: partition@3f0000 {
+                               reg = <0x3f0000 0x10000>;
+                               label = "art";
+                               read-only;
+                       };
+               };
+       };
+};
+
+&eth0 {
+       status = "okay";
+
+       phy-handle = <&phy4>;
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+       mtd-mac-address-increment = <(-1)>;
+};
+
+&eth1 {
+       status = "okay";
+
+       mtd-mac-address = <&uboot 0x1fc00>;
+       mtd-mac-address-increment = <1>;
+};
+
+&mdio0 {
+       status = "okay";
+
+       phy4: ethernet-phy@4 {
+               reg = <4>;
+               phy-mode = "mii";
+       };
+};
+
+&pcie {
+       status = "okay";
+
+       ath9k: wifi@168c,002b {
+               compatible = "pci168c,002b";
+               reg = <0x0000 0 0 0 0>;
+               qca,no-eeprom;
+               mtd-mac-address = <&uboot 0x1fc00>;
+               #gpio-cells = <2>;
+               gpio-controller;
+       };
+};
+
+&pinmux {
+       switch_led_pins: pinmux_switch_led_pins {
+               pinctrl-single,bits = <0x0 0x0 0xf8>;
+       };
+};
+
+&uart {
+       status = "okay";
+};
index cb5a67f5d862d5fed991f5437f1030f3b1df0275..09180bd678a98075b1db0982201a8dcec16c2986 100644 (file)
@@ -1,2 +1,11 @@
 include ./common-tp-link.mk
 
+
+define Device/tl-wr740n-v2
+  $(Device/tplink-4m)
+  ATH_SOC := ar7240
+  DEVICE_TITLE := TP-Link TL-WR740N/ND v2
+  TPLINK_HWID := 0x07400001
+  SUPPORTED_DEVICES := tplink,tl-wr740n-v2 tl-wr740n-v2
+endef
+TARGET_DEVICES += tl-wr740n-v2