NAND driver cleanups, thanks to Alexandros C. Couloumbis for testing * use generic...
authorGabor Juhos <juhosg@openwrt.org>
Thu, 4 Oct 2007 10:56:38 +0000 (10:56 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Thu, 4 Oct 2007 10:56:38 +0000 (10:56 +0000)
SVN-Revision: 9118

target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
target/linux/adm5120/files/arch/mips/adm5120/platform.c
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h [new file with mode: 0644]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
target/linux/adm5120/router_le/config-2.6.22

index cec57f7e9499ff1c152a615846318683b28d36f1..fee9db80317f5dfd7de56def47369596f4721d9b 100644 (file)
@@ -1,11 +1,18 @@
 /*
  *  $Id$
  *
- *  Mikrotik RouterBOARDs 1xx series
+ *  Mikrotik RouterBOARD 1xx series
  *
  *  Copyright (C) 2007 OpenWrt.org
  *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
  *
+ *  NAND initialization code was based on a driver for Linux 2.6.19+ which
+ *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
+ *  their RouterBoard 1xx and 5xx series boards.
+ *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
+ *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *    The original Mikrotik code seems not to have a license.
+ *
  *  This program is free software; you can redistribute it and/or
  *  modify it under the terms of the GNU General Public License
  *  as published by the Free Software Foundation; either version 2
 
 #include <linux/kernel.h>
 #include <linux/init.h>
+#include <linux/delay.h>
 
 #include <asm/bootinfo.h>
 #include <asm/gpio.h>
 
+#include <adm5120_defs.h>
+#include <adm5120_irq.h>
+#include <adm5120_nand.h>
 #include <adm5120_board.h>
 #include <adm5120_platform.h>
-#include <adm5120_irq.h>
+
+#define RB1XX_NAND_CHIP_DELAY  25
+
+#define RB150_NAND_BASE                0x1FC80000
+#define RB150_NAND_SIZE                1
+
+#define RB150_GPIO_NAND_READY  ADM5120_GPIO_PIN0
+#define RB150_GPIO_NAND_NCE    ADM5120_GPIO_PIN1
+#define RB150_GPIO_NAND_CLE    ADM5120_GPIO_P2L2
+#define RB150_GPIO_NAND_ALE    ADM5120_GPIO_P3L2
+
+#define RB150_NAND_DELAY       100
+
+#define RB150_NAND_WRITE(v) \
+       writeb((v),(void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
+
+/*--------------------------------------------------------------------------*/
 
 static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
        PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
@@ -39,7 +66,7 @@ static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
        PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
 };
 
-static struct mtd_partition rb1xx_partitions[] = {
+static struct mtd_partition rb1xx_nor_partitions[] = {
        {
                .name   = "booter",
                .offset = 0,
@@ -52,24 +79,42 @@ static struct mtd_partition rb1xx_partitions[] = {
        }
 };
 
+static struct mtd_partition rb1xx_nand_partitions[] = {
+       {
+               .name   = "kernel",
+               .offset = 0,
+               .size   = 4 * 1024 * 1024,
+       } , {
+               .name   = "rootfs",
+               .offset = MTDPART_OFS_NXTBLK,
+               .size   = MTDPART_SIZ_FULL
+       }
+};
+
 static struct platform_device *rb1xx_devices[] __initdata = {
        &adm5120_flash0_device,
        &adm5120_nand_device,
 };
 
-static struct platform_device *rb150_devices[] __initdata = {
-       &adm5120_flash0_device,
-       /* TODO: nand device is not yet supported */
+/*
+ * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
+ * will not be able to find the kernel that we load.  So set the oobinfo
+ * when creating the partitions
+ */
+static struct nand_ecclayout rb1xx_nand_ecclayout = {
+        .eccbytes      = 6,
+        .eccpos                = { 8, 9, 10, 13, 14, 15 },
+        .oobavail      = 9,
+        .oobfree       = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
 };
 
-static void __init rb1xx_setup(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_partitions);
-       adm5120_flash0_data.parts = rb1xx_partitions;
-
-       /* TODO: setup mac address */
-}
+static struct resource rb150_nand_resource[] = {
+       [0] = {
+               .start  = RB150_NAND_BASE,
+               .end    = RB150_NAND_BASE + RB150_NAND_SIZE-1,
+               .flags  = IORESOURCE_MEM,
+       },
+};
 
 #if 0
 /*
@@ -110,6 +155,86 @@ static unsigned char rb_vlans[6] __initdata = {
 #define rb192_vlans    rb_vlans
 #endif
 
+/*--------------------------------------------------------------------------*/
+
+static int rb150_nand_ready(struct mtd_info *mtd) {
+
+       return gpio_get_value(RB150_GPIO_NAND_READY);
+}
+
+static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+               unsigned int ctrl)
+{
+       if (ctrl & NAND_CTRL_CHANGE) {
+               gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
+               gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
+               gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
+       }
+
+       udelay(RB150_NAND_DELAY);
+
+       if (cmd != NAND_CMD_NONE)
+               RB150_NAND_WRITE(cmd);
+}
+
+/*--------------------------------------------------------------------------*/
+
+static void __init rb1xx_mac_setup(void)
+{
+       /* TODO */
+}
+
+static void __init rb1xx_flash_setup(void)
+{
+       /* setup data for flash0 device */
+       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_partitions);
+       adm5120_flash0_data.parts = rb1xx_nor_partitions;
+
+       /* setup data for NAND device */
+       adm5120_nand_data.chip.nr_chips = 1;
+       adm5120_nand_data.chip.nr_partitions = ARRAY_SIZE(rb1xx_nand_partitions);
+       adm5120_nand_data.chip.partitions = rb1xx_nand_partitions;
+       adm5120_nand_data.chip.ecclayout = &rb1xx_nand_ecclayout;
+       adm5120_nand_data.chip.chip_delay = RB1XX_NAND_CHIP_DELAY;
+       adm5120_nand_data.chip.options = NAND_NO_AUTOINCR;
+}
+
+static void __init rb1xx_setup(void)
+{
+       /* enable NAND flash interface */
+       adm5120_nand_enable();
+
+       /* initialize NAND chip */
+       adm5120_nand_set_spn(1);
+       adm5120_nand_set_wpn(0);
+
+       rb1xx_flash_setup();
+       rb1xx_mac_setup();
+}
+
+static void __init rb150_setup(void)
+{
+       /* setup GPIO pins for NAND flash chip */
+       gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
+       gpio_direction_input(RB150_GPIO_NAND_READY);
+       gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
+       gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
+       gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
+       gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
+       gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
+       gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
+
+       adm5120_nand_device.num_resources = ARRAY_SIZE(rb150_nand_resource);
+       adm5120_nand_device.resource = rb150_nand_resource;
+       adm5120_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
+       adm5120_nand_data.ctrl.dev_ready = rb150_nand_ready;
+
+       rb1xx_flash_setup();
+       rb1xx_mac_setup();
+}
+
+/*--------------------------------------------------------------------------*/
+
 static struct adm5120_board rb111_board __initdata = {
        .mach_type      = MACH_ADM5120_RB_111,
        .name           = "Mikrotik RouterBOARD 111",
@@ -161,11 +286,11 @@ static struct adm5120_board rb133c_board __initdata = {
 static struct adm5120_board rb150_board __initdata = {
        .mach_type      = MACH_ADM5120_RB_150,
        .name           = "Mikrotik RouterBOARD 150",
-       .board_setup    = rb1xx_setup,
+       .board_setup    = rb150_setup,
        .eth_num_ports  = 5,
        .eth_vlans      = rb15x_vlans,
-       .num_devices    = ARRAY_SIZE(rb150_devices),
-       .devices        = rb150_devices,
+       .num_devices    = ARRAY_SIZE(rb1xx_devices),
+       .devices        = rb1xx_devices,
 };
 
 static struct adm5120_board rb153_board __initdata = {
index 2a795c950ee97649074da3d93390e0c979cec62a..175e1a5d899a09fad9e5a0eef9600d5a5718c490 100644 (file)
 #include <asm/bootinfo.h>
 #include <asm/gpio.h>
 
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_info.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-#include <asm/mach-adm5120/adm5120_switch.h>
-#include <asm/mach-adm5120/adm5120_platform.h>
-
-static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
-               unsigned int mctrl);
+#include <adm5120_defs.h>
+#include <adm5120_info.h>
+#include <adm5120_irq.h>
+#include <adm5120_switch.h>
+#include <adm5120_nand.h>
+#include <adm5120_platform.h>
 
 #if 1
 /*
@@ -120,20 +118,23 @@ struct platform_device adm5120_flash1_device =    {
 /* NAND flash */
 struct resource adm5120_nand_resource[] = {
        [0] = {
-               .start  = ADM5120_SRAM1_BASE,
-               .end    = ADM5120_SRAM1_BASE+ADM5120_MPMC_SIZE-1,
+               .start  = ADM5120_NAND_BASE,
+               .end    = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
                .flags  = IORESOURCE_MEM,
        },
 };
 
-struct adm5120_nand_platform_data adm5120_nand_data;
+struct platform_nand_data adm5120_nand_data = {
+       .ctrl.dev_ready = adm5120_nand_ready,
+       .ctrl.cmd_ctrl  = adm5120_nand_cmd_ctrl,
+};
 
 struct platform_device adm5120_nand_device = {
-       .name           = "adm5120-nand",
+       .name           = "gen_nand",
        .id             = -1,
-       .dev.platform_data = &adm5120_nand_data,
        .num_resources  = ARRAY_SIZE(adm5120_nand_resource),
        .resource       = adm5120_nand_resource,
+       .dev.platform_data = &adm5120_nand_data,
 };
 
 /* built-in UARTs */
@@ -173,7 +174,25 @@ struct amba_device adm5120_uart1_device = {
        .periphid       = 0x0041010,
 };
 
-static void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
                unsigned int mctrl)
 {
 }
+
+int adm5120_nand_ready(struct mtd_info *mtd)
+{
+       return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
+}
+
+void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+       if (ctrl & NAND_CTRL_CHANGE) {
+               adm5120_nand_set_cle(ctrl & NAND_CLE);
+               adm5120_nand_set_ale(ctrl & NAND_ALE);
+               adm5120_nand_set_cen(ctrl & NAND_NCE);
+       }
+
+       if (cmd != NAND_CMD_NONE)
+               NAND_WRITE_REG(NAND_REG_DATA, cmd);
+}
+
index f5ab1b3f1cb625c3c0141cef5ff51945552dc356..d39620aabb9f4e03b65abbfe6d103cf342b12e8c 100644 (file)
@@ -29,6 +29,7 @@
 #define ADM5120_SDRAM0_BASE    0x00000000
 #define ADM5120_SDRAM1_BASE    0x01000000
 #define ADM5120_SRAM1_BASE     0x10000000
+#define ADM5120_NAND_BASE      ADM5120_SRAM1_BASE
 #define ADM5120_MPMC_BASE      0x11000000
 #define ADM5120_USBC_BASE      0x11200000
 #define ADM5120_PCIMEM_BASE    0x11400000
@@ -41,6 +42,7 @@
 #define ADM5120_UART1_BASE     0x12800000
 #define ADM5120_SRAM0_BASE     0x1FC00000
 
+#define ADM5120_NAND_SIZE      0xB
 #define ADM5120_MPMC_SIZE      0x1000
 #define ADM5120_USBC_SIZE      0x84
 #define ADM5120_PCIMEM_SIZE    (ADM5120_PCIIO_BASE - ADM5120_PCIMEM_BASE)
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
new file mode 100644 (file)
index 0000000..8d86fc6
--- /dev/null
@@ -0,0 +1,102 @@
+/*
+ *  ADM5120 NAND interface definitions
+ *
+ *  This header file defines the hardware registers of the ADM5120 SoC
+ *  built-in NAND interface.
+ *
+ *  Copyright (C) 2007 OpenWrt.org
+ *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
+ *
+ *  NAND interface routines was based on a driver for Linux 2.6.19+ which
+ *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
+ *  their RouterBoard 1xx and 5xx series boards.
+ *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
+ *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
+ *    The original Mikrotik code seems not to have a license.
+ *
+ *  This program is free software; you can redistribute it and/or
+ *  modify it under the terms of the GNU General Public License
+ *  as published by the Free Software Foundation; either version 2
+ *  of the License, or (at your option) any later version.
+ *
+ *  This program is distributed in the hope that it will be useful,
+ *  but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *  GNU General Public License for more details.
+ *
+ *  You should have received a copy of the GNU General Public License
+ *  along with this program; if not, write to the
+ *  Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor,
+ *  Boston, MA  02110-1301, USA.
+ *
+ */
+
+#ifndef _ADM5120_NAND_H_
+#define _ADM5120_NAND_H_
+
+#include <linux/types.h>
+#include <linux/io.h>
+
+#include <adm5120_defs.h>
+#include <adm5120_switch.h>
+
+/* NAND control registers */
+#define NAND_REG_DATA          0x0 /* data register */
+#define NAND_REG_SET_CEn       0x1 /* CE# low */
+#define NAND_REG_CLR_CEn       0x2 /* CE# high */
+#define NAND_REG_CLR_CLE       0x3 /* CLE low */
+#define NAND_REG_SET_CLE       0x4 /* CLE high */
+#define NAND_REG_CLR_ALE       0x5 /* ALE low */
+#define NAND_REG_SET_ALE       0x6 /* ALE high */
+#define NAND_REG_SET_SPn       0x7 /* SP# low (use spare area) */
+#define NAND_REG_CLR_SPn       0x8 /* SP# high (do not use spare area) */
+#define NAND_REG_SET_WPn       0x9 /* WP# low */
+#define NAND_REG_CLR_WPn       0xA /* WP# high */
+#define NAND_REG_STATUS                0xB /* Status register */
+
+#define ADM5120_NAND_STATUS_READY      0x80
+
+#define NAND_READ_REG(r) \
+       readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+#define NAND_WRITE_REG(r, v) \
+       writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
+
+/*-------------------------------------------------------------------------*/
+
+static inline void adm5120_nand_enable(void)
+{
+       SW_WRITE_REG(BW_CNTL1, BW_CNTL1_NAND_ENABLE);
+       SW_WRITE_REG(BOOT_DONE, 1);
+}
+
+static inline void adm5120_nand_set_wpn(unsigned int set)
+{
+       NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
+}
+
+static inline void adm5120_nand_set_spn(unsigned int set)
+{
+       NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
+}
+
+static inline void adm5120_nand_set_cle(unsigned int set)
+{
+       NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
+}
+
+static inline void adm5120_nand_set_ale(unsigned int set)
+{
+       NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
+}
+
+static inline void adm5120_nand_set_cen(unsigned int set)
+{
+       NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
+}
+
+static inline u8 adm5120_nand_get_status(void)
+{
+       return NAND_READ_REG(NAND_REG_STATUS);
+}
+
+#endif /* _ADM5120_NAND_H_ */
index 9b2c98dc9b5accd1a1dd502ab5f3d49f9f197774..b20c483b845a23db0e24ff98ccffb7244f70f6a4 100644 (file)
@@ -31,6 +31,7 @@
 #include <linux/mtd/mtd.h>
 #include <linux/mtd/map.h>
 #include <linux/mtd/partitions.h>
+#include <linux/mtd/nand.h>
 
 #include <linux/amba/bus.h>
 #include <linux/amba/serial.h>
@@ -44,10 +45,6 @@ struct adm5120_flash_platform_data {
 #endif
 };
 
-struct adm5120_nand_platform_data {
-       /* TODO : not yet implemented */
-};
-
 struct adm5120_switch_platform_data {
        /* TODO: not yet implemented */
 };
@@ -73,7 +70,7 @@ static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
 
 extern struct adm5120_flash_platform_data adm5120_flash0_data;
 extern struct adm5120_flash_platform_data adm5120_flash1_data;
-extern struct adm5120_nand_platform_data adm5120_nand_data;
+extern struct platform_nand_data adm5120_nand_data;
 extern struct adm5120_switch_platform_data adm5120_switch_data;
 extern struct amba_pl010_data adm5120_uart0_data;
 extern struct amba_pl010_data adm5120_uart1_data;
@@ -86,4 +83,11 @@ extern struct platform_device adm5120_switch_device;
 extern struct amba_device adm5120_uart0_device;
 extern struct amba_device adm5120_uart1_device;
 
+extern void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
+               unsigned int mctrl);
+
+extern void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
+               unsigned int ctrl);
+extern int adm5120_nand_ready(struct mtd_info *mtd);
+
 #endif /* _ADM5120_PLATFORM_H_ */
index f3c05f6ef308f833efde58f9b0738ef372d01b6f..c3af94ba747772148f7d2172a4d07336d0ad5a8c 100644 (file)
 #define P5TBC_SHIFT            8
 #define P5RBC_SHIFT            12
 
+#define BW_CNTL1_NAND_ENABLE   0x100
+
 /* PHY_CNTL0 register bits */
 #define PHY_CNTL0_PHYA_MASK    BITMASK(5)
 #define PHY_CNTL0_PHYR_MASK    BITMASK(5)
index a331c2a1349d879dd187ed988336b7aa8705e32f..0f93b1affae5cc1bea5664da30a2b6c9b3517a15 100644 (file)
@@ -154,14 +154,14 @@ CONFIG_MTD_MAP_BANK_WIDTH_4=y
 # CONFIG_MTD_MTDRAM is not set
 CONFIG_MTD_MYLOADER_PARTS=y
 CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ADM5120=y
+# CONFIG_MTD_NAND_ADM5120 is not set
 # CONFIG_MTD_NAND_CAFE is not set
 # CONFIG_MTD_NAND_DISKONCHIP is not set
 # CONFIG_MTD_NAND_ECC_SMC is not set
 CONFIG_MTD_NAND_IDS=y
 # CONFIG_MTD_NAND_MUSEUM_IDS is not set
 # CONFIG_MTD_NAND_NANDSIM is not set
-# CONFIG_MTD_NAND_PLATFORM is not set
+CONFIG_MTD_NAND_PLATFORM=y
 # CONFIG_MTD_NAND_VERIFY_WRITE is not set
 # CONFIG_MTD_ONENAND is not set
 CONFIG_MTD_PARTITIONS=y