kernel: bump 4.9 to 4.9.166
[openwrt/openwrt.git] / target / linux / brcm47xx / base-files / lib /
2018-07-30 Jo-Philipp Wichbrcm47xx: rework model detection
2017-09-25 Hauke MehrtensRevert "brcm47xx: Fix sysupgrade with E1200v1"
2017-09-24 Rosen Penevbrcm47xx: Fix sysupgrade with E1200v1
2017-07-15 Mathias Kresintreewide: use the generic board_name function
2017-07-15 Mathias Kresintreewide: do board detection during preinit
2017-05-27 Jo-Philipp Wichbrcm47xx: remove target specific network preinit config
2015-12-02 Rafał Miłeckibrcm47xx: add Netgear WN2500RP support
2015-06-06 Rafał Miłeckibrcm47xx: sysupgrade: drop useless shift in platform.sh
2015-06-05 John Crispinbrcm47xx: extract TRX from image on the fly
2015-04-17 Rafał Miłeckibrcm47xx: fix handling absolute paths in sysupgrade...
2015-04-16 Rafał Miłeckibrcm47xx: rework vendor fw handling to don't duplicate...
2015-04-14 Rafał Miłeckiotrx: change command line API to start with a mode
2015-04-09 Rafał Miłeckibrcm47xx: verify also standard TRX images during sysupgrade
2015-04-09 Rafał Miłeckibrcm47xx: fix WRT300N devices magics for sysupgrade...
2015-04-09 Rafał Miłeckibrcm47xx: switch to the otrx for verifying TRX images
2015-03-31 Rafał Miłeckibrcm47xx: image: share function checking TRX in provide...
2015-03-31 Rafał Miłeckibrcm47xx: fix checking cross-vendors firmware images
2015-03-31 Rafał Miłeckibrcm47xx: display all errors (not just the 1st one...
2015-03-31 Rafał Miłeckibrcm47xx: recognize more device specific firmwares
2015-03-30 Rafał Miłeckibrcm47xx: compare provided firmware magic with device...
2014-12-30 Rafał Miłeckibrcm47xx: support for flashing CHK and CyberTAN images
2014-12-30 Rafał Miłeckibrcm47xx: verify if CHK/CyberTAN contains valid TRX
2014-12-15 Rafał Miłeckibrcm47xx: extract magics from specific upgrade images...
2014-12-15 Rafał Miłeckibrcm47xx: detect (and still reject for now) CyberTAN...
2014-12-15 Rafał Miłeckibrcm47xx: use separated function in upgrade to detect...
2014-10-14 John Crispinscripts: fix wrong usage of '==' operator
2014-06-02 John Crispintarget/linux/*/base-files/lib/upgrade/platform.sh ...
2014-01-12 Hauke Mehrtensbrcm47xx: fix network failsafe indication
2013-12-01 Hauke Mehrtensbrcm47xx: use "firmware" partition name
2013-07-14 Hauke Mehrtensbrcm47xx: fix switch handling
2013-07-14 Hauke Mehrtensbrcm47xx: do not load the kernel modules needed for...
2013-07-14 Hauke Mehrtensbrcm47xx: do not change nvram without user interaction
2013-07-13 Hauke Mehrtensbrcm47xx: proc gets mounted without this patch
2013-07-13 Hauke Mehrtensbrcm47xx: remove obsolete hotplug stuff
2013-06-21 John Crispinbrcm47xx: dont manually insmod switch drivers
2013-02-20 Hauke Mehrtensbrcm47xx: do not use vlan0 any more.
2013-02-16 Hauke Mehrtensbrcm47xx: improve cpuport detection for filesafe
2013-02-04 Hauke MehrtensAdd Failsafe support for Linksys E3000V1 / WRT610NV2
2013-01-27 Hauke Mehrtensbrcm47xx: load pps_core and ptp before tg3 to make...
2013-01-03 Hauke Mehrtensbrcm47xx: add bgmac driver
2013-01-03 Hauke Mehrtensbrcm47xx: build b44 as a module
2013-01-03 Hauke Mehrtensbrcm47xx: run ifup before starting the switch
2012-12-19 Mirko VogtDo not use deprecated path to functions.sh (/etc/functi...
2012-12-19 Mirko VogtDo not overload mount-call - trying to reduce confusion
2012-12-14 Hauke Mehrtensbrcm47xx: improve suppressing printing if a module...
2012-12-13 Hauke Mehrtensbrcm47xx: suppress printing if a module was found in...
2012-12-13 Hauke Mehrtenskernel: in kernel 3.6.8 and later tg3 depends on hwmon.ko
2012-11-25 Hauke Mehrtensbrcm47xx: whitespace cleanups
2012-09-25 Hauke Mehrtensactivate failsafe on all ports of the switch and not...
2010-07-15 Daniel Dickinsontarget (base-files): Fixed failsafe mode by adding...
2010-06-26 Felix Fietkauadd back the base-files/image code from brcm-2.4 to...