Gabor Juhos [Wed, 22 Aug 2012 09:43:18 +0000 (09:43 +0000)]
ar71xx: add support for TP-Link TL-WDR3600
The TL-WDR3600 is identical to the TL-WDR4300 with the exception that is has
only two antennas.
[juhosg: remove the custom machine type, change the board name instead]
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
SVN-Revision: 33219
John Crispin [Wed, 22 Aug 2012 09:22:38 +0000 (09:22 +0000)]
tools/firmware-utils/ptgen option to use MB rounding
SVN-Revision: 33218
John Crispin [Wed, 22 Aug 2012 09:19:11 +0000 (09:19 +0000)]
lantiq: dsl: fix status polling loop
doesn't need to do it 20 times all the time, missing loop condition check
Signed-off-by: Conor O'Gorman <i@conorogorman.net>
SVN-Revision: 33217
John Crispin [Wed, 22 Aug 2012 09:14:42 +0000 (09:14 +0000)]
dnsmasq: Set prefix on-link bit in RAs
This is fix an issue with dnsmasq's RA that does not set the "on-link" bit, making all local IPv6 traffic go to the router then to the destination host, not directly to each other.
patch is from dnsmasq git
SVN-Revision: 33216
John Crispin [Wed, 22 Aug 2012 09:10:24 +0000 (09:10 +0000)]
add led defintion for the WR2543 5GHz WLAN LED
Signed-off-by: Andy Leiserson <andy@leiserson.org>
SVN-Revision: 33215
Jo-Philipp Wich [Sun, 19 Aug 2012 15:59:24 +0000 (15:59 +0000)]
comgt: handle service mode for Huawai modems (#12039)
It seems that the comgt package does not handle the Huawei 3G USB dongle E176 correctly (and probably other Huawei dongles too). My dongle appears as ID 12d1:1001 Huawei Technologies Co., Ltd. E620 USB Modem and 3G/UMTS
connections work well. However, no connection is established if only 2G/GPRS is available: the pppd chat script fails with NO CARRIER although the dongle is registered to the network (via 2G). As outlined in this wiki or this
blog, Huawei chips use the AT^SYSCFG command to set 2G or 3G mode, which is not implemented in comgt at the moment. Thus I wrote a patch for /lib/network/3g.sh which adds support for the "service" option in the network
configuration with Huawei dongles. By default (if no "service" option is specified) also 2G is used when 3G is unavailable. The Huawei dongle is detected analogously to other chips (the output of gcom -d /dev/ttyUSB0 -s
/etc/gcom/getcardinfo.gcom is scanned for huawei).
Some further information: The AT^SYSCFG command seems to be respected only once after the dongle is attached (or after the host is powered up). Resetting the dongle seems to render the serial port unusable in some cases.
However, the patch sets a useful mode by default which should cover most use cases (3G preferred, but 2G allowed) and if 3G-only or 2G-only mode is required the device can be power cycled.
SVN-Revision: 33212
Hauke Mehrtens [Sat, 18 Aug 2012 15:45:18 +0000 (15:45 +0000)]
remove unused file
SVN-Revision: 33210
Hauke Mehrtens [Sat, 18 Aug 2012 14:08:35 +0000 (14:08 +0000)]
make brcm47xx build only with bcma or only with ssb support.
There are some ifdefs missing so when only ssb or only bcma was
selected in the kernel config it did not build.
SVN-Revision: 33209
Hauke Mehrtens [Sat, 18 Aug 2012 11:51:35 +0000 (11:51 +0000)]
update gpio patches
SVN-Revision: 33208
Gabor Juhos [Fri, 17 Aug 2012 17:56:07 +0000 (17:56 +0000)]
ramips: add board alias for the ALL0239-3G
Generate image for the ALL0239-3G which can be flashed through the
chipset-vendor SDK based firmware's web-interface and bootloader.
The bootloader seems to ignore uImage checksum errors, but does complain about
them once the 0xDEADC0DE was replaced by an actual JFFS2 page.
I'm working on implementing fixtrx for uImage in the mtd package to solve this.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33206
Gabor Juhos [Fri, 17 Aug 2012 17:56:05 +0000 (17:56 +0000)]
ramips: add support for D-Link DIR-615 H1
rt2x00 still needs some patching as the radio doesn't come to life.
Installation via webflash.
[juhosg: fix whitespace issues, remove rt305x_register_usb
from machine setup because the board has no USB port]
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33205
Gabor Juhos [Fri, 17 Aug 2012 17:56:02 +0000 (17:56 +0000)]
tools/firmware-utils: add tool for DIR-651-H1 firmware generation
Signed-off-by: Mikko Hissa <mikko.hissa@uta.fi>
SVN-Revision: 33204
Gabor Juhos [Thu, 16 Aug 2012 07:11:30 +0000 (07:11 +0000)]
ar71xx: setup WLAN LED for the TL-WA901ND v2
Closes #11889.
SVN-Revision: 33202
Jo-Philipp Wich [Thu, 16 Aug 2012 01:24:46 +0000 (01:24 +0000)]
acx-mac80211: depend on mipsel, not mips since AR7 is low endian
SVN-Revision: 33201
Jo-Philipp Wich [Wed, 15 Aug 2012 20:22:35 +0000 (20:22 +0000)]
iwinfo: add hwinfo for Rt3052
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33200
Jo-Philipp Wich [Wed, 15 Aug 2012 16:25:38 +0000 (16:25 +0000)]
iwinfo: add hw info support for Rt3xxx SoCs
This takes the device_id and subsystem_id from the EEPROM, I'll add
the info for other Rt3xxx chips in the next days.
[jow: minor whitespace changes]
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33199
Felix Fietkau [Wed, 15 Aug 2012 14:49:59 +0000 (14:49 +0000)]
ath5k: add back a patch for fixing eeprom rate power parsing
SVN-Revision: 33198
Jo-Philipp Wich [Wed, 15 Aug 2012 13:31:31 +0000 (13:31 +0000)]
make static host utility linking default to off
SVN-Revision: 33197
Jo-Philipp Wich [Wed, 15 Aug 2012 13:28:26 +0000 (13:28 +0000)]
use bundle-libraries.sh to install required host utilities into imagebuilder staging tree
SVN-Revision: 33196
Jo-Philipp Wich [Wed, 15 Aug 2012 13:28:23 +0000 (13:28 +0000)]
add a helper script to bundle required libraries for host utilities
SVN-Revision: 33195
Gabor Juhos [Wed, 15 Aug 2012 13:27:55 +0000 (13:27 +0000)]
package/om-watchdog: start service only on the om2p/om2p-lc boards on ar71xx
If the package is installed, it starts the watchdog daemon
on every ar71xx based board.
SVN-Revision: 33194
Gabor Juhos [Wed, 15 Aug 2012 13:26:51 +0000 (13:26 +0000)]
generic: extend pci_isable_usb_common_quirks patch
Fixes the following build error:
SYSMAP System.map
Building modules, stage 2.
MODPOST 48 modules
ERROR: "usb_enable_xhci_ports" [drivers/usb/host/ehci-hcd.ko] undefined!
ERROR: "usb_is_intel_switchable_xhci" [drivers/usb/host/ehci-hcd.ko] undefined!
make[6]: *** [__modpost] Error 1
make[5]: *** [modules] Error 2
SVN-Revision: 33193
John Crispin [Wed, 15 Aug 2012 09:20:12 +0000 (09:20 +0000)]
set xen images to gzip compression, fixes #11970
SVN-Revision: 33192
Florian Fainelli [Tue, 14 Aug 2012 16:19:30 +0000 (16:19 +0000)]
MCS8140 actually selects CPU_ARM926T
Should make inclusion for other MCS814x SoCs easier
SVN-Revision: 33188
Jo-Philipp Wich [Tue, 14 Aug 2012 13:58:49 +0000 (13:58 +0000)]
iwinfo: add some Atheros cards
These are two Atheros modules we are using, just for the cosmetics to make them
show up with the proper names in LuCI.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33186
John Crispin [Tue, 14 Aug 2012 12:32:11 +0000 (12:32 +0000)]
fixes gpio_dev un/reload balancing
Signed-off-by: SHI Bin <shibin@ctsing.com>
SVN-Revision: 33183
Jo-Philipp Wich [Tue, 14 Aug 2012 10:33:43 +0000 (10:33 +0000)]
wrt350nv2-builder: don't use internal zlib macro OF() in ioapi.h, it breaks with new zlib releases
SVN-Revision: 33181
Jo-Philipp Wich [Tue, 14 Aug 2012 10:33:40 +0000 (10:33 +0000)]
iwinfo: transparently handle radioX names in madwifi backend
SVN-Revision: 33180
John Crispin [Tue, 14 Aug 2012 10:13:39 +0000 (10:13 +0000)]
fix breakage when compiling for armv6
SVN-Revision: 33179
Florian Fainelli [Mon, 13 Aug 2012 14:46:47 +0000 (14:46 +0000)]
generic: enhanced image Makefile
* Creation of uImage for WNR854T only done once (before 2x for jffs2 build and 1x for squashfs build)
* Got rid of unneccessary padding of rootfs partition
* ARM zImages always need a machine id, therefore do not copy generic (=no id) uImage to BIN_DIR, instead copy zImage
* Generalized functions for easier re-using and enhancing (e.g. D-Link DNS 323 implementation would be only a couple lines)
* Copy rootfs partitions to BIN_DIR, just like it is done for D-Link DNS 323
* Use variables to allows easily changing for custom builds, e.g. kernel mtd size for symbols
* Size check of kernel files to avoid builds that break devices
* Use for "-sysupgrade" and "-factory" in image names (like ar71xx, brcm63xx, etc.) to avoid questions about which image to use
Signed-off by: Matthias Buecher <mail@maddes.net>
SVN-Revision: 33174
Gabor Juhos [Mon, 13 Aug 2012 14:01:38 +0000 (14:01 +0000)]
ar71xx: uci-defaults/leds for ALL0258N
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33165
Gabor Juhos [Mon, 13 Aug 2012 14:01:37 +0000 (14:01 +0000)]
base-files: uci-defaults for rssileds
Adds capability to add uci-defaults defining RSSI LEDs
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33164
Gabor Juhos [Mon, 13 Aug 2012 14:01:34 +0000 (14:01 +0000)]
new package: rssileds daemon
rssileds is a small user-space process to control LEDs by polling the
signal quality reported by a WiFi interface. By using the iwinfo library,
rssileds is independent of the WiFi driver used.
It supports pwm controlled LEDs and may by used to nicely fade through
all colors in real-time of the rainbow while only wasting very little CPU
time and a small constant amount of system memory.
An example configuration for the ALL0258N will follow in the next patch.
This is a slightly improved version of rssileds, now quality values are
in percent and stuff is written to syslog.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33163
John Crispin [Mon, 13 Aug 2012 12:45:36 +0000 (12:45 +0000)]
dependencies break when alsa is staged
SVN-Revision: 33162
John Crispin [Mon, 13 Aug 2012 11:08:13 +0000 (11:08 +0000)]
unify tapi deps
SVN-Revision: 33160
Florian Fainelli [Mon, 13 Aug 2012 09:55:12 +0000 (09:55 +0000)]
busybox: enable fsync applet by default
SVN-Revision: 33159
Florian Fainelli [Mon, 13 Aug 2012 09:55:10 +0000 (09:55 +0000)]
leds: do not register device if no leds defined
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33158
Florian Fainelli [Mon, 13 Aug 2012 09:55:07 +0000 (09:55 +0000)]
BCM6358 fix enet MII clk definitions
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33157
Florian Fainelli [Mon, 13 Aug 2012 09:55:04 +0000 (09:55 +0000)]
nb4: fix support, add support for SVC and CLIP BTN
Signed-off-by: Miguel GAIO <miguel.gaio@efixo.com>
SVN-Revision: 33156
Jo-Philipp Wich [Mon, 13 Aug 2012 00:26:34 +0000 (00:26 +0000)]
introduce a menuconfig option to turn off static linking of host utilities
SVN-Revision: 33154
John Crispin [Sun, 12 Aug 2012 20:01:04 +0000 (20:01 +0000)]
3rd time lucky ... too much sun today
SVN-Revision: 33152
John Crispin [Sun, 12 Aug 2012 19:59:51 +0000 (19:59 +0000)]
unbreak deps
SVN-Revision: 33151
John Crispin [Sun, 12 Aug 2012 18:38:59 +0000 (18:38 +0000)]
breaks when building for powerpc
SVN-Revision: 33150
Jo-Philipp Wich [Sun, 12 Aug 2012 13:27:49 +0000 (13:27 +0000)]
convert remaining tools to $(HOST_STATIC_LINKING) (#12012)
SVN-Revision: 33148
Jo-Philipp Wich [Sun, 12 Aug 2012 13:20:27 +0000 (13:20 +0000)]
base-files: provide a sysupgrade -r (--restore-backup) option as convenience wrapper for tar -C / -x(v)zf
SVN-Revision: 33147
Jo-Philipp Wich [Sun, 12 Aug 2012 12:48:49 +0000 (12:48 +0000)]
xz: update to 5.0.4
Signed-off-by: Jonh Wendell <jonh.wendell@gmail.com>
SVN-Revision: 33146
Gabor Juhos [Sun, 12 Aug 2012 12:48:31 +0000 (12:48 +0000)]
ramips: rename rt3352 usb platform devices
In order to get OHCI/EHCI working on the Rt3352, the platform device must be
named so rt3883-?hci will recognize it.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33145
Gabor Juhos [Sun, 12 Aug 2012 12:48:28 +0000 (12:48 +0000)]
ramips: watchdog: use maximum possible timeout by default
As the userspace has no means to determine the maximum possible timeout, use
that as the default and let the userspace lower it when necessary.
As the result the usual OpenWrt install (with busybox's watchdog trying to set
the timeout to 60s on start) is using a 33s timeout on an RT3052 clocked at
384MHz instead of the current 20s default.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33144
Gabor Juhos [Sun, 12 Aug 2012 12:48:26 +0000 (12:48 +0000)]
ramips: provide means to specify custom "image name" for uImages, use for DIR-620
D-Link's DIR-620 allows to flash a uImage directly from its web-interface but
for that the image name should be set to DIR_620.
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33143
Gabor Juhos [Sun, 12 Aug 2012 12:48:24 +0000 (12:48 +0000)]
ramips: add D-Link DIR-620 A1 support
Full functionality runtime tested, installation via OEM web-interface requires
a follow-up patch.
Thanks go to Sergey Vasilyugin for his patch that pointed me at the missing
bits (including the antiparallel wps led).
Signed-off-by: Paul Fertser <fercerpav@gmail.com>
SVN-Revision: 33142
Jo-Philipp Wich [Sun, 12 Aug 2012 12:46:47 +0000 (12:46 +0000)]
tools/ppl: fix automake error due to use of obsolete directory name
I recently experienced this:
configure.ac:1101: the top level
interfaces/Prolog/Ciao/Makefile.am:168: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/GNU/Makefile.am:167: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/SICStus/Makefile.am:71: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/SWI/Makefile.am:187: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/XSB/Makefile.am:186: `pkglibdir' is not a legitimate directory for `DATA'
interfaces/Prolog/YAP/Makefile.am:176: `pkglibdir' is not a legitimate directory for `DATA'
make[4]: *** [Makefile.in] Error 1
Found this on google:
http://bugs.mysql.com/bug.php?id=63898
And used this to fix it:
fgrep -rlZ pkglib_DATA --include Makefile.am . | xargs -0 sed -i 's/pkglib_DATA/pkgdata_DATA/g'
Signed-off-by: Daniel Golle <dgolle@allnet.de>
SVN-Revision: 33141
Jo-Philipp Wich [Sun, 12 Aug 2012 12:34:30 +0000 (12:34 +0000)]
use HOST_STATIC_LINKING instead of hardcoding -static
SVN-Revision: 33140
Jo-Philipp Wich [Sun, 12 Aug 2012 12:34:28 +0000 (12:34 +0000)]
prereq-build.mk: do not perform static linking tests on Darwin
SVN-Revision: 33139
Jo-Philipp Wich [Sun, 12 Aug 2012 12:34:25 +0000 (12:34 +0000)]
host-build.mk: define a variable HOST_STATIC_LINKING which is set to "-static" on non-Darwin systems
SVN-Revision: 33138
Gabor Juhos [Sun, 12 Aug 2012 10:30:41 +0000 (10:30 +0000)]
generic: use __meminit annotation for crashlog_init_memblock
Fixes this section mismatch warning:
WARNING: vmlinux.o(.meminit.text+0xb14): Section mismatch in reference
from the function memblock_insert_region() to the function
.init.text:crashlog_init_memblock()
The function __meminit memblock_insert_region() references
a function __init crashlog_init_memblock().
If crashlog_init_memblock is only used by memblock_insert_region then
annotate crashlog_init_memblock with a matching annotation.
Also, remove the __init annotations from 'include/linux/crashlog.h'
SVN-Revision: 33137
Jo-Philipp Wich [Sat, 11 Aug 2012 16:07:36 +0000 (16:07 +0000)]
netifd: bump to git head, userspace routes are installed with RTPROT_STATIC from now on
SVN-Revision: 33132
Florian Fainelli [Sat, 11 Aug 2012 12:56:09 +0000 (12:56 +0000)]
only support 128KiB erase block sizes
SVN-Revision: 33131
Florian Fainelli [Sat, 11 Aug 2012 12:56:00 +0000 (12:56 +0000)]
disable PCI support
None of the boards we support have PCI connectors
SVN-Revision: 33130
Florian Fainelli [Sat, 11 Aug 2012 12:55:51 +0000 (12:55 +0000)]
strip a bit more the kernel config
SVN-Revision: 33129
Florian Fainelli [Sat, 11 Aug 2012 12:55:41 +0000 (12:55 +0000)]
properly advertise OHCI and EHCI capabilities
SVN-Revision: 33128
Florian Fainelli [Sat, 11 Aug 2012 12:55:30 +0000 (12:55 +0000)]
change partition names to be more in line with other OpenWrt devices
SVN-Revision: 33127
Florian Fainelli [Sat, 11 Aug 2012 12:55:15 +0000 (12:55 +0000)]
generate upgrade files suffixed with filesystem type
SVN-Revision: 33126
Jo-Philipp Wich [Sat, 11 Aug 2012 00:25:23 +0000 (00:25 +0000)]
6rd: missing config option `ipaddr`.
This option is necessary when configuring 6rd behind NAT.
Signed-off-by: Stéphan Kochen <stephan@kochen.nl>
SVN-Revision: 33123
Jo-Philipp Wich [Sat, 11 Aug 2012 00:05:18 +0000 (00:05 +0000)]
add remaining missing build prereq checks
SVN-Revision: 33122
Jo-Philipp Wich [Fri, 10 Aug 2012 23:35:20 +0000 (23:35 +0000)]
add a build preeq check for glibc-static
SVN-Revision: 33121
Jo-Philipp Wich [Fri, 10 Aug 2012 22:38:09 +0000 (22:38 +0000)]
sed: disable further SELinux features
SVN-Revision: 33120
Jo-Philipp Wich [Fri, 10 Aug 2012 21:41:44 +0000 (21:41 +0000)]
sed: unconditionally disable SELinux, NLS and ACL support (#12007)
SVN-Revision: 33119
Jo-Philipp Wich [Fri, 10 Aug 2012 21:25:45 +0000 (21:25 +0000)]
Revert "[tools] cmake: link statically"
Static linking of cmake is broken on x86_64, until we can sort it out, revert the static linking.
SVN-Revision: 33118
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:08 +0000 (19:27 +0000)]
firmware-utils: link statically
SVN-Revision: 33117
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:07 +0000 (19:27 +0000)]
e2fsprogs: link statically
SVN-Revision: 33116
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:06 +0000 (19:27 +0000)]
dosfstools: link statically
SVN-Revision: 33115
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:04 +0000 (19:27 +0000)]
cmake: link statically
SVN-Revision: 33114
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:03 +0000 (19:27 +0000)]
ccache: fix compilation, link statically
SVN-Revision: 33113
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:01 +0000 (19:27 +0000)]
yaffs2: link statically
SVN-Revision: 33112
Jo-Philipp Wich [Fri, 10 Aug 2012 19:27:00 +0000 (19:27 +0000)]
xz: link statically
SVN-Revision: 33111
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:58 +0000 (19:26 +0000)]
wrt350nv2-builder: link statically
SVN-Revision: 33110
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:57 +0000 (19:26 +0000)]
upx: link statically
SVN-Revision: 33109
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:55 +0000 (19:26 +0000)]
upslug2: link statically
SVN-Revision: 33108
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:54 +0000 (19:26 +0000)]
sstrip: link statically
SVN-Revision: 33107
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:52 +0000 (19:26 +0000)]
squashfs4: link statically
SVN-Revision: 33106
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:50 +0000 (19:26 +0000)]
squashfs: link statically
SVN-Revision: 33105
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:49 +0000 (19:26 +0000)]
sdcc: link statically
SVN-Revision: 33104
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:48 +0000 (19:26 +0000)]
qemu: link statically
SVN-Revision: 33103
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:46 +0000 (19:26 +0000)]
pkg-config: link statically
SVN-Revision: 33102
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:45 +0000 (19:26 +0000)]
patch-cmdline: link statically
SVN-Revision: 33101
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:43 +0000 (19:26 +0000)]
padjffs2: link statically
SVN-Revision: 33100
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:42 +0000 (19:26 +0000)]
mtools: link statically
SVN-Revision: 33099
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:40 +0000 (19:26 +0000)]
mtd-utils: link statically
SVN-Revision: 33098
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:36 +0000 (19:26 +0000)]
mklibs: link statically
SVN-Revision: 33097
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:34 +0000 (19:26 +0000)]
mkimage: link statically
SVN-Revision: 33096
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:31 +0000 (19:26 +0000)]
m4: link statically
SVN-Revision: 33095
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:30 +0000 (19:26 +0000)]
lzma: link statically
SVN-Revision: 33094
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:28 +0000 (19:26 +0000)]
genext2fs: link statically
SVN-Revision: 33093
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:26 +0000 (19:26 +0000)]
flock: link statically
SVN-Revision: 33092
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:24 +0000 (19:26 +0000)]
flex: link statically
SVN-Revision: 33091
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:19 +0000 (19:26 +0000)]
bison: link statically
SVN-Revision: 33090
Jo-Philipp Wich [Fri, 10 Aug 2012 19:26:17 +0000 (19:26 +0000)]
sed: link statically
SVN-Revision: 33089
John Crispin [Fri, 10 Aug 2012 19:07:03 +0000 (19:07 +0000)]
remove duplicate HOSTCC_NOCACHE
SVN-Revision: 33088
John Crispin [Fri, 10 Aug 2012 19:05:22 +0000 (19:05 +0000)]
fix ccache build
SVN-Revision: 33087
Florian Fainelli [Fri, 10 Aug 2012 14:15:06 +0000 (14:15 +0000)]
move LIB_SUFFIX from base-files to rules.mk
Some packages are going to need fixups based on LIB_SUFFIX
SVN-Revision: 33080
projects / openwrt / openwrt.git / log