openwrt/openwrt.git
10 years agokernel: add missing changes to 220-gc_sections.patch that were accidentally dropped...
Felix Fietkau [Tue, 4 Feb 2014 07:35:21 +0000 (07:35 +0000)]
kernel: add missing changes to 220-gc_sections.patch that were accidentally dropped during porting to 3.13

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39458

10 years agofeeds: disable the x-wrt feed, it is unmaintained
Felix Fietkau [Mon, 3 Feb 2014 14:29:04 +0000 (14:29 +0000)]
feeds: disable the x-wrt feed, it is unmaintained

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39457

10 years agowifi: Introduce 802.11ac support
Felix Fietkau [Mon, 3 Feb 2014 13:31:44 +0000 (13:31 +0000)]
wifi: Introduce 802.11ac support

This patch introduces 802.11ac support to mac80211 and hostapd. The split of
VHT160 in two 80 MHz bands is not yet supported, since it requires an
additional user supplied parameter for the channel of the second band.

Signed-off-by: Matti Laakso <malaakso@elisanet.fi>
Signed-off-by: Simon Wunderlich <simon@open-mesh.com>
[sven@open-mesh.com: Rebased patch, merged htmode and vhtmode,
removed special hwmode, replaced uci vht_capab list with overwritable
autoconfig, fixed hostapd integration, fixed commit description, add HT40+/-
for VHT modes, add VHT40 center_freq autoconfig, refactored major parts]
Signed-off-by: Sven Eckelmann <sven@open-mesh.com>
SVN-Revision: 39456

10 years agoath9k: merge a tx power handling fix
Felix Fietkau [Mon, 3 Feb 2014 10:53:24 +0000 (10:53 +0000)]
ath9k: merge a tx power handling fix

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39455

10 years agoodhcp6c: Revert to slightly modified version of old behaviour
Steven Barth [Mon, 3 Feb 2014 09:06:25 +0000 (09:06 +0000)]
odhcp6c: Revert to slightly modified version of old behaviour

Latest changes broke source-restriction of on-link routes. Restoring
old-behaviour but adding correct source-restrictions which prevents
the offlink handler to remove the on-link route.

SVN-Revision: 39454

10 years agoeglibc: fix build failure on newer make versions
Luka Perkov [Sun, 2 Feb 2014 23:41:35 +0000 (23:41 +0000)]
eglibc: fix build failure on newer make versions

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39453

10 years agoquilt: update to 0.61
Luka Perkov [Sun, 2 Feb 2014 23:41:32 +0000 (23:41 +0000)]
quilt: update to 0.61

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39452

10 years agoodhcp6c: improve handling of RA on-link routes and addresses
Steven Barth [Sun, 2 Feb 2014 19:40:33 +0000 (19:40 +0000)]
odhcp6c: improve handling of RA on-link routes and addresses

SVN-Revision: 39451

10 years agomac80211: fix basic rate list processing in ad-hoc mode
Felix Fietkau [Sun, 2 Feb 2014 14:25:09 +0000 (14:25 +0000)]
mac80211: fix basic rate list processing in ad-hoc mode

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39450

10 years agolibubox: update to latest version, fixes a jshn warning in json_get_values (#14891)
Felix Fietkau [Sun, 2 Feb 2014 14:25:06 +0000 (14:25 +0000)]
libubox: update to latest version, fixes a jshn warning in json_get_values (#14891)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39449

10 years agohostapd: do not get basic_rate as a simple string variable
Felix Fietkau [Sun, 2 Feb 2014 14:25:02 +0000 (14:25 +0000)]
hostapd: do not get basic_rate as a simple string variable

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39448

10 years agomac80211: fix processing of the distance option (#14893)
Felix Fietkau [Sun, 2 Feb 2014 14:02:56 +0000 (14:02 +0000)]
mac80211: fix processing of the distance option (#14893)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39447

10 years agomac80211: merge upstream fixes
Felix Fietkau [Sat, 1 Feb 2014 15:33:04 +0000 (15:33 +0000)]
mac80211: merge upstream fixes

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39442

10 years agoodhcpd: fix internal router DHCPv4 filter
Steven Barth [Sat, 1 Feb 2014 13:33:05 +0000 (13:33 +0000)]
odhcpd: fix internal router DHCPv4 filter

SVN-Revision: 39441

10 years agobusybox: Add help documentation in menuconfig
Jo-Philipp Wich [Fri, 31 Jan 2014 19:15:14 +0000 (19:15 +0000)]
busybox: Add help documentation in menuconfig

Explaining why you shouldn't be here, and about version tainting.

Signed-off-by: Karl Palsson <karlp@remake.is>
SVN-Revision: 39440

10 years agoadd missing symbol
Zoltan Herpai [Fri, 31 Jan 2014 16:04:19 +0000 (16:04 +0000)]
add missing symbol

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39439

10 years agosunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix...
Zoltan Herpai [Fri, 31 Jan 2014 15:53:53 +0000 (15:53 +0000)]
sunxi: boot changes - Added uEnv.txt to facilitate automatic boot. - Cosmetic fix in u-boot Makefile - Don't force command line arguments

Signed-off-by: Zalan Blenessy <zalan.blenessy@gmail.com>
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39438

10 years agobase-files: expose taint flags in /etc/openwrt_release
Jo-Philipp Wich [Fri, 31 Jan 2014 15:48:47 +0000 (15:48 +0000)]
base-files: expose taint flags in /etc/openwrt_release

SVN-Revision: 39437

10 years agoversion.mk: add initial infrastructure for recording specific build taint conditions...
Jo-Philipp Wich [Fri, 31 Jan 2014 15:48:42 +0000 (15:48 +0000)]
version.mk: add initial infrastructure for recording specific build taint conditions like modified busybox or disabled ipv6 support

SVN-Revision: 39436

10 years agobusybox: add a reworked implementation of menuconfig support, this time with a guard...
Felix Fietkau [Fri, 31 Jan 2014 13:50:16 +0000 (13:50 +0000)]
busybox: add a reworked implementation of menuconfig support, this time with a guard option that keeps all symbols at default values until an extra option is activated

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39435

10 years agobusybox: fix dependency on librpc (#14636)
Jo-Philipp Wich [Fri, 31 Jan 2014 12:28:29 +0000 (12:28 +0000)]
busybox: fix dependency on librpc (#14636)

SVN-Revision: 39434

10 years agoodhcp6c: several bugfixes and improvements
Steven Barth [Fri, 31 Jan 2014 11:23:00 +0000 (11:23 +0000)]
odhcp6c: several bugfixes and improvements

* Fixed broken stateless-mode (fixes #14863)
* Support for multiple IAIDs, improved server compatibility,
  improved NTP/SNTP support and other fixes (thanks to T-Labs)

SVN-Revision: 39433

10 years agoath9k: fix handling of the default chip pci id on ar93xx (#14886)
Felix Fietkau [Fri, 31 Jan 2014 11:05:21 +0000 (11:05 +0000)]
ath9k: fix handling of the default chip pci id on ar93xx (#14886)

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39432

10 years agohostapd: fix basic rate list handling with netifd
Felix Fietkau [Fri, 31 Jan 2014 10:43:18 +0000 (10:43 +0000)]
hostapd: fix basic rate list handling with netifd

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39431

10 years agokernel/modules: add xen-privcmd package
Gabor Juhos [Thu, 30 Jan 2014 17:08:03 +0000 (17:08 +0000)]
kernel/modules: add xen-privcmd package

Also select that for kmod-xen-fs. Fixes the following build
error:

  Package kmod-xen-fs is missing dependencies for the following libraries:
  xen-privcmd.ko

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39430

10 years agoar71xx: dragino2: add missing sysupgrade support.
Gabor Juhos [Thu, 30 Jan 2014 17:08:02 +0000 (17:08 +0000)]
ar71xx: dragino2: add missing sysupgrade support.

The original dragino2 board support was missing some changes from the
upstream svn repository (http://svn.dragino.com/dragino2) that supported
sysupgrade.

[juhosg: change subject]

Signed-off-by: Karl Palsson <karlp@remake.is>
Patchwork: http://patchwork.openwrt.org/patch/4801/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39429

10 years agomac80211: refresh tarball with a newer backports version
Felix Fietkau [Thu, 30 Jan 2014 15:55:59 +0000 (15:55 +0000)]
mac80211: refresh tarball with a newer backports version

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39428

10 years agomac80211: update to wireless-testing 2014-01-23
Felix Fietkau [Thu, 30 Jan 2014 13:21:36 +0000 (13:21 +0000)]
mac80211: update to wireless-testing 2014-01-23

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39427

10 years agohostapd: fix frequency selection for ap+sta
Felix Fietkau [Thu, 30 Jan 2014 13:21:30 +0000 (13:21 +0000)]
hostapd: fix frequency selection for ap+sta

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39426

10 years agolibubox: ubox: procd: ubus: update to latest git head
John Crispin [Thu, 30 Jan 2014 09:02:58 +0000 (09:02 +0000)]
libubox: ubox: procd: ubus: update to latest git head

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39425

10 years agokernel: fix parallel build issues with header install
Felix Fietkau [Thu, 30 Jan 2014 07:33:42 +0000 (07:33 +0000)]
kernel: fix parallel build issues with header install

Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 39424

10 years agoAdd sysfixtime init script, replacement of luci_fixtime
Jo-Philipp Wich [Wed, 29 Jan 2014 13:17:03 +0000 (13:17 +0000)]
Add sysfixtime init script, replacement of luci_fixtime

Simply scan for the most recent file in /etc and set
system time to this file modification time if it's in the future
It allow some time dependent program to work immediatly
without waiting for ntpd to sync

v1: v2: bad approach
v3: simply scan /etc, thanks to Bastian Bittorf for the idea
v4: use sort -n, thanks to Catalin Patulea
v5: use [] instead of [[]], thanks to Andreas Mohr
v6: use openwrt style, thanks to Bastian Bittorf

Signed-off-by: Etienne CHAMPETIER <etienne.champetier@free.fr>
SVN-Revision: 39422

10 years agolldpd: build without libreadline
Jo-Philipp Wich [Wed, 29 Jan 2014 13:10:39 +0000 (13:10 +0000)]
lldpd: build without libreadline

lldpcli uses libreadline for tab completion. libreadline take around 110kb.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39421

10 years agolldpd: add missing lldpcli
Jo-Philipp Wich [Wed, 29 Jan 2014 13:10:35 +0000 (13:10 +0000)]
lldpd: add missing lldpcli

lldpd calls on startup lldpcli to configure itself.

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39420

10 years agolldpd: push to version 0.7.7
Jo-Philipp Wich [Wed, 29 Jan 2014 13:10:31 +0000 (13:10 +0000)]
lldpd: push to version 0.7.7

Signed-off-by: Alexander Couzens <lynxis@fe80.eu>
SVN-Revision: 39419

10 years agohostapd: Fix 80211w setup with netifd
Jo-Philipp Wich [Tue, 28 Jan 2014 21:12:45 +0000 (21:12 +0000)]
hostapd: Fix 80211w setup with netifd

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 39412

10 years agohostapd: Fix basic_rate setup with netifd
Jo-Philipp Wich [Tue, 28 Jan 2014 21:12:36 +0000 (21:12 +0000)]
hostapd: Fix basic_rate setup with netifd

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
SVN-Revision: 39411

10 years agokernel/3.1x: yaffs: fix handling of small-page NAND devices
Gabor Juhos [Tue, 28 Jan 2014 17:30:25 +0000 (17:30 +0000)]
kernel/3.1x: yaffs: fix handling of small-page NAND devices

Since the yaffs code update (r39084), it is not
possible to install OpenWrt on RouterBoards with
small-page NAND chips. Fix the yaffs code to make
it work again.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39409

10 years agoadd missing symbol
Zoltan Herpai [Mon, 27 Jan 2014 19:30:01 +0000 (19:30 +0000)]
add missing symbol

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39406

10 years agomxs: make config and patches versioned
Zoltan Herpai [Mon, 27 Jan 2014 19:29:04 +0000 (19:29 +0000)]
mxs: make config and patches versioned

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39405

10 years agobrcm63xx: fix warning in Redboot code
Florian Fainelli [Mon, 27 Jan 2014 04:34:39 +0000 (04:34 +0000)]
brcm63xx: fix warning in Redboot code

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39404

10 years agox86: remove 3.6 support
Gabor Juhos [Sun, 26 Jan 2014 17:42:26 +0000 (17:42 +0000)]
x86: remove 3.6 support

The 3.6 kernel isn't used by any of the x86 subtargets, so remove it.

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39403

10 years agoar71xx: swconfig: use the local helper to set LED brightness on link down
Gabor Juhos [Sun, 26 Jan 2014 16:46:21 +0000 (16:46 +0000)]
ar71xx: swconfig: use the local helper to set LED brightness on link down

Use the 'swconfig_trig_set_brightness' function to set
the brightness value of the LED when the link goes down.
This ensures that the last brighness value is saved into
a local variable which is used to track the actual LED
status.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39402

10 years agoar71xx: wpe72: set active_low flag for the reset button
Gabor Juhos [Sun, 26 Jan 2014 14:55:34 +0000 (14:55 +0000)]
ar71xx: wpe72: set active_low flag for the reset button

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39401

10 years agoar71xx: wp543: set active_low flag for the buttons
Gabor Juhos [Sun, 26 Jan 2014 14:55:32 +0000 (14:55 +0000)]
ar71xx: wp543: set active_low flag for the buttons

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39400

10 years agokernel: update 3.10 to 3.10.28
Gabor Juhos [Sun, 26 Jan 2014 11:30:34 +0000 (11:30 +0000)]
kernel: update 3.10 to 3.10.28

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39399

10 years agoar71xx: image: reserve 4 erase blocks on the TP-Link devices
Gabor Juhos [Sat, 25 Jan 2014 18:12:13 +0000 (18:12 +0000)]
ar71xx: image: reserve 4 erase blocks on the TP-Link devices

This ensures that the generated images will have enough erase
blocks for JFFS2.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39397

10 years agofirmware-utils/mktplinkfw: allow to reserve space in the generated images
Gabor Juhos [Sat, 25 Jan 2014 18:12:03 +0000 (18:12 +0000)]
firmware-utils/mktplinkfw: allow to reserve space in the generated images

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39396

10 years agoar71xx: archer c7: define LEDs connected to the AR8327 switch
Gabor Juhos [Sat, 25 Jan 2014 11:16:59 +0000 (11:16 +0000)]
ar71xx: archer c7: define LEDs connected to the AR8327 switch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39395

10 years agoar71xx: image: move WNDAP360 macro
Gabor Juhos [Sat, 25 Jan 2014 08:31:45 +0000 (08:31 +0000)]
ar71xx: image: move WNDAP360 macro

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39394

10 years agokernel/3.8: update pci_disable_usb_common_quirks patch
Gabor Juhos [Sat, 25 Jan 2014 08:25:05 +0000 (08:25 +0000)]
kernel/3.8: update pci_disable_usb_common_quirks patch

Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39393

10 years agoar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards
Gabor Juhos [Fri, 24 Jan 2014 17:40:17 +0000 (17:40 +0000)]
ar71xx: fix bad RX sensitivity on newer TL-WDR4300 boards

On recent TL-WDR4300 boards the external LNAs of the 2.4GHz
interface are connected to GPIO lines. Because these GPIO
lines are disabled by default, the RX sensitivity of the
device is quite bad.

Setup the GPIOs of the external LNAs to fix the issue.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39392

10 years agoar71xx: image: generate sysupgrade images for the Compex boards
Gabor Juhos [Fri, 24 Jan 2014 17:15:03 +0000 (17:15 +0000)]
ar71xx: image: generate sysupgrade images for the Compex boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39391

10 years agoar71xx: add sysupgrade support for the Compex boards
Gabor Juhos [Fri, 24 Jan 2014 17:15:02 +0000 (17:15 +0000)]
ar71xx: add sysupgrade support for the Compex boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39390

10 years agoar71xx: image: use a single firmware partition on Compex devices
Gabor Juhos [Fri, 24 Jan 2014 17:15:01 +0000 (17:15 +0000)]
ar71xx: image: use a single firmware partition on Compex devices

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39389

10 years agoar71xx: enable MTD_SPLIT_LZMA_FW option
Gabor Juhos [Fri, 24 Jan 2014 17:15:01 +0000 (17:15 +0000)]
ar71xx: enable MTD_SPLIT_LZMA_FW option

It will be used for Compex devices.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39388

10 years agokernel/3.1x: add split code for LZMA compressed kernel based firmwares
Gabor Juhos [Fri, 24 Jan 2014 17:14:59 +0000 (17:14 +0000)]
kernel/3.1x: add split code for LZMA compressed kernel based firmwares

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39387

10 years agoconfig: lxc: enable KERNEL_POSIX_MQUEUE
Luka Perkov [Fri, 24 Jan 2014 13:49:39 +0000 (13:49 +0000)]
config: lxc: enable KERNEL_POSIX_MQUEUE

Recent lxc versions are not useful if this option is not enabled. That said,
enable KERNEL_POSIX_MQUEUE by default when KERNEL_LXC_MISC is selected.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39385

10 years agoar71xx: image: detect partition sizes in the Image/Build/Ath macro
Gabor Juhos [Fri, 24 Jan 2014 11:59:35 +0000 (11:59 +0000)]
ar71xx: image: detect partition sizes in the Image/Build/Ath macro

Get the size of the mtd partitions directly from the
MTD layout and remove the superfluous macro parameters.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39384

10 years agoar71xx: image: fix size verification in the CatFiles macro
Gabor Juhos [Fri, 24 Jan 2014 11:59:32 +0000 (11:59 +0000)]
ar71xx: image: fix size verification in the CatFiles macro

The macro checks the size of the rootfs image even if
the second parameter of the macro contains the size of
an eraseblock. It is wrong because the size of the
kernel image will be adjusted to the next eraseblock
and the resulting image might be too large.

Fix the macro to check the size of the final image
instead of the rootfs image.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39383

10 years agoRevert "kernel: create firmware partition from MyLoader partition parser"
Gabor Juhos [Fri, 24 Jan 2014 08:48:10 +0000 (08:48 +0000)]
Revert "kernel: create firmware partition from MyLoader partition parser"

This reverts r38197.

The automatically created firmware partition includes
the partition_table partition. Apart from the partition
table, this partition contains sensitive data on some
Compex devices which data can be destroyed when the
firmware partition gets modified. Revert the change to
prevent that.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39382

10 years agouboot-envtools: add support for wndr3700
Luka Perkov [Fri, 24 Jan 2014 00:07:48 +0000 (00:07 +0000)]
uboot-envtools: add support for wndr3700

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39380

10 years agoar71xx: ap83: define mtd layout via command line
Gabor Juhos [Thu, 23 Jan 2014 16:47:42 +0000 (16:47 +0000)]
ar71xx: ap83: define mtd layout via command line

Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39379

10 years agoar71xx: ap81: define mtd layout via command line
Gabor Juhos [Thu, 23 Jan 2014 16:47:41 +0000 (16:47 +0000)]
ar71xx: ap81: define mtd layout via command line

Also use the RKuImage macro becasue the original
firmware starts with the rootfs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39378

10 years agoar71xx: image: show size limit in warning messages
Gabor Juhos [Thu, 23 Jan 2014 12:27:28 +0000 (12:27 +0000)]
ar71xx: image: show size limit in warning messages

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39376

10 years agoar71xx: add initramfs image support for Compex devices
Gabor Juhos [Thu, 23 Jan 2014 12:23:10 +0000 (12:23 +0000)]
ar71xx: add initramfs image support for Compex devices

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39375

10 years agoar71xx: wp543: use KEY_RESET code for the sw4 button
Gabor Juhos [Thu, 23 Jan 2014 12:23:08 +0000 (12:23 +0000)]
ar71xx: wp543: use KEY_RESET code for the sw4 button

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39374

10 years agoar71xx: create wndr3700 network config from uci-defaults
Luka Perkov [Thu, 23 Jan 2014 11:33:42 +0000 (11:33 +0000)]
ar71xx: create wndr3700 network config from uci-defaults

Since that was the last configuration in defconfig directory we can drop the
defconfig init script too.

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39373

10 years agobase-files: add ucidef_add_switch_port function
Luka Perkov [Thu, 23 Jan 2014 11:33:41 +0000 (11:33 +0000)]
base-files: add ucidef_add_switch_port function

Signed-off-by: Luka Perkov <luka@openwrt.org>
SVN-Revision: 39372

10 years agoodhcpd: fix certain config values being overwritten
Steven Barth [Thu, 23 Jan 2014 11:02:18 +0000 (11:02 +0000)]
odhcpd: fix certain config values being overwritten

Thanks to Hans Dedecker for the fix.

SVN-Revision: 39371

10 years ago6rd: Make don't fragment bit (df) a configurable variable
Steven Barth [Thu, 23 Jan 2014 10:59:04 +0000 (10:59 +0000)]
6rd: Make don't fragment bit (df) a configurable variable

Make the IPv4 "do not fragment" bit a configurable variable for the 6rd
tunnel interface as the bit should not be set in the encapsulating IPv4
header according to RFC3056.
On top the config variable allows to enable/disable path mtu discovery
for tunnel interfaces.
Config variable can be passed to netifd as tunnel config support is
already present for the "do not fragment" bit.

Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
SVN-Revision: 39370

10 years agokernel/3.10: update pci_disable_usb_common_quirks patch
Gabor Juhos [Thu, 23 Jan 2014 09:07:49 +0000 (09:07 +0000)]
kernel/3.10: update pci_disable_usb_common_quirks patch

Fix build errors caused by undefined 'usb_disable_xhci_ports'
symbol.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39369

10 years agompc85xx: Fix building ramdisk images
Gabor Juhos [Thu, 23 Jan 2014 06:55:58 +0000 (06:55 +0000)]
mpc85xx: Fix building ramdisk images

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39368

10 years agompc85xx: Remove inittab workaround
Gabor Juhos [Thu, 23 Jan 2014 06:55:50 +0000 (06:55 +0000)]
mpc85xx: Remove inittab workaround

The default inittab uses "askconsole" which is implemented by procd
and uses the console provided by the kernel command line.

Hence, this platform specific workaround is not necessary anymore.

Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39367

10 years agoubox: revert log buffer size changes
John Crispin [Wed, 22 Jan 2014 15:33:16 +0000 (15:33 +0000)]
ubox: revert log buffer size changes

the fix horribly broke existing setups

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39366

10 years agoubox: update to latest git head
John Crispin [Tue, 21 Jan 2014 20:59:04 +0000 (20:59 +0000)]
ubox: update to latest git head

make sure log buffer size is not bigger than the ubus message size

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39365

10 years agobrcm63xx: enable support for BCM63268
Florian Fainelli [Tue, 21 Jan 2014 18:50:26 +0000 (18:50 +0000)]
brcm63xx: enable support for BCM63268

Support for the BCM63268 is usable, enable it by default.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39364

10 years agobrcm63xx: add support for BCM963269BHR board
Florian Fainelli [Tue, 21 Jan 2014 18:50:11 +0000 (18:50 +0000)]
brcm63xx: add support for BCM963269BHR board

Add kernel support for the BCM963269BHR board, USB and Ethernet switch,
LEDs and buttons are working.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39363

10 years agobrcm63xx: improve BCM63268 support
Florian Fainelli [Tue, 21 Jan 2014 18:49:50 +0000 (18:49 +0000)]
brcm63xx: improve BCM63268 support

Allow using the HSSPI controller since it works just fine, as well as
the integrated switch core, since that one works too.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
SVN-Revision: 39362

10 years agoar71xx: mynet-n750: define LEDs connected to the AR8327 switch
Gabor Juhos [Tue, 21 Jan 2014 17:17:42 +0000 (17:17 +0000)]
ar71xx: mynet-n750: define LEDs connected to the AR8327 switch

Signed-off-by: Felix Kaechele <heffer@fedoraproject.org>
Patchwork: http://patchwork.openwrt.org/patch/4743/
Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39361

10 years agomodules: swconfig.c: update the error path on 3.13, and behave nicely with return
Zoltan Herpai [Tue, 21 Jan 2014 14:43:50 +0000 (14:43 +0000)]
modules: swconfig.c: update the error path on 3.13, and behave nicely with return

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39360

10 years agomodules: update swconfig.c to compile on 3.13 (compile-tested)
Zoltan Herpai [Tue, 21 Jan 2014 14:24:45 +0000 (14:24 +0000)]
modules: update swconfig.c to compile on 3.13 (compile-tested)

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39359

10 years agoadd missing symbols
Zoltan Herpai [Tue, 21 Jan 2014 14:23:00 +0000 (14:23 +0000)]
add missing symbols

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39358

10 years agokernel: ocf: add missing dependency for hifn driver
Jonas Gorski [Tue, 21 Jan 2014 12:11:18 +0000 (12:11 +0000)]
kernel: ocf: add missing dependency for hifn driver

The HIFN driver is a PCI driver, thus requires PCI support to be enabled
to compile. Therefore let it depend on PCI..

Should fix mvebu builds.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 39357

10 years agolantiq: fix unaligned access in vdsl firmware extractor
John Crispin [Tue, 21 Jan 2014 09:51:16 +0000 (09:51 +0000)]
lantiq: fix unaligned access in vdsl firmware extractor

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39356

10 years agoadd missing symbols
Zoltan Herpai [Tue, 21 Jan 2014 07:53:11 +0000 (07:53 +0000)]
add missing symbols

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39355

10 years agob53: use drvdata to store driver data
Hauke Mehrtens [Mon, 20 Jan 2014 20:01:22 +0000 (20:01 +0000)]
b53: use drvdata to store driver data

we should not abuse the platform_data pointer.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 39354

10 years agob53: make b53_switch_reset_gpio() static
Hauke Mehrtens [Mon, 20 Jan 2014 19:07:18 +0000 (19:07 +0000)]
b53: make b53_switch_reset_gpio() static

SVN-Revision: 39353

10 years agoprocd: update to latest git head
John Crispin [Mon, 20 Jan 2014 18:42:58 +0000 (18:42 +0000)]
procd: update to latest git head

Fixes OpenWrt bug #14832

Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 39352

10 years agonetifd: don't add unnecessary NOP policy rules
Steven Barth [Mon, 20 Jan 2014 18:23:02 +0000 (18:23 +0000)]
netifd: don't add unnecessary NOP policy rules

SVN-Revision: 39351

10 years agoupdate ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice
Zoltan Herpai [Mon, 20 Jan 2014 15:23:27 +0000 (15:23 +0000)]
update ocf patches - as ENT_DEBUG is removed, move the messages into pr_notice

Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 39350

10 years agoupdate/fixup overlayfs patch
Imre Kaloz [Mon, 20 Jan 2014 14:46:29 +0000 (14:46 +0000)]
update/fixup overlayfs patch

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39349

10 years agoadd initial 3.13 support
Imre Kaloz [Mon, 20 Jan 2014 13:56:24 +0000 (13:56 +0000)]
add initial 3.13 support

Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 39348

10 years ago6in4: fix typo in config variable (fixes #14830)
Steven Barth [Mon, 20 Jan 2014 12:53:15 +0000 (12:53 +0000)]
6in4: fix typo in config variable (fixes #14830)

SVN-Revision: 39347

10 years agoar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch
Gabor Juhos [Mon, 20 Jan 2014 10:23:06 +0000 (10:23 +0000)]
ar71xx: tl-wr1043nd-v2: define LEDs connected to the AR8327 switch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39346

10 years agoar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch
Gabor Juhos [Mon, 20 Jan 2014 10:23:05 +0000 (10:23 +0000)]
ar71xx: tl-wdr4300: define LEDs connected to the AR8327 switch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39345

10 years agoar71xx: set default LED config for the RB2011* boards
Gabor Juhos [Mon, 20 Jan 2014 10:23:04 +0000 (10:23 +0000)]
ar71xx: set default LED config for the RB2011* boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39344

10 years agoar71xx: set status_led for the RB2011* boards
Gabor Juhos [Mon, 20 Jan 2014 10:23:03 +0000 (10:23 +0000)]
ar71xx: set status_led for the RB2011* boards

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39343

10 years agoar71xx: fix indentation in diag.sh
Gabor Juhos [Mon, 20 Jan 2014 10:23:02 +0000 (10:23 +0000)]
ar71xx: fix indentation in diag.sh

Replace the leading spaces with tabs.

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39342

10 years agoar71xx: rb2011: define LEDs connected to the AR8327 switch
Gabor Juhos [Mon, 20 Jan 2014 10:23:01 +0000 (10:23 +0000)]
ar71xx: rb2011: define LEDs connected to the AR8327 switch

Signed-off-by: Gabor Juhos <juhosg@openwrt.org>
SVN-Revision: 39341