disable image generation for boards which we still have problems with (at least if...
authorGabor Juhos <juhosg@openwrt.org>
Mon, 9 Jul 2007 16:36:19 +0000 (16:36 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Mon, 9 Jul 2007 16:36:19 +0000 (16:36 +0000)
SVN-Revision: 7902

target/linux/adm5120-2.6/image/Makefile
target/linux/adm5120-2.6/image/lzma-loader/src/board.c
target/linux/adm5120eb-2.6/image/Makefile

index 732b82de3e881698b81d213df87229d61953995e..352ebf480f1e231fb4a1c381286065dbbc3b54dc 100644 (file)
@@ -82,7 +82,7 @@ root=/dev/mtdblock1 rootfstype=yaffs2 init=/etc/preinit
 endef
 
 define Image/Build/RouterBoard
-       $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-vmlinux
+       $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-rb1xx-vmlinux
        $(STAGING_DIR)/bin/patch-cmdline $(KDIR)/vmlinux.elf '$(strip $(call Image/cmdline/yaffs2)) '
 endef
 
@@ -91,6 +91,7 @@ define Image/Build
 ifneq ($(1),jffs2-256k)
 ifneq ($(1),jffs2-128k)
        $(call Image/Build/Compex,$(1),wp54g-wrt,$(patsubst jffs2-%,jffs2,$(1)),WP54G-WRT)
+ifeq (CONFIG_DEVEL,y)
        $(call Image/Build/Edimax,$(1),br-6104k,$(patsubst jffs2-%,jffs2,$(1)),BR-6104K)
        $(call Image/Build/Edimax,$(1),br-6104kp,$(patsubst jffs2-%,jffs2,$(1)),BR-6104KP)
        $(call Image/Build/Edimax,$(1),br-6114wg,$(patsubst jffs2-%,jffs2,$(1)),BR-6114WG)
@@ -117,6 +118,7 @@ ifneq ($(1),jffs2-128k)
        $(call Image/Build/MyLoader,$(1),wpp54ag,$(patsubst jffs2-%,jffs2,$(1)),WPP54AG)
 endif
 endif
+endif
 ifeq ($(1),tgz)
        $(call Image/Build/RouterBoard)
 endif
@@ -143,12 +145,17 @@ define Image/Build/LZMAKernel/Admboot
        $(call Image/Build/LZMAKernel,$(1),$(2),0x80500000,0x6D8,y,$(1))
 endef
 
+define Image/Build/Initramfs/RouterBoard
+       $(CP) $(KDIR)/vmlinux.elf $(IMGNAME)-ramfs-rb1xx.elf
+endef
+
 define Image/Build/Initramfs
+       $(call Image/Build/Initramfs/RouterBoard)
+       $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
+ifeq (CONFIG_DEVEL,y)
        $(call Image/Build/LZMAKernel/Generic,generic,bin)
-       $(call Image/Build/LZMAKernel/Generic,rb-100,elf)
        $(call Image/Build/LZMAKernel/Generic,np27g,bin)
        $(call Image/Build/LZMAKernel/Generic,wp54g,bin)
-       $(call Image/Build/LZMAKernel/Compex,wp54g-wrt,bin)
        $(call Image/Build/LZMAKernel/Admboot,br-6104k,gz)
        $(call Image/Build/LZMAKernel/Admboot,easy-5120,gz)
        $(call Image/Build/LZMAKernel/Admboot,easy-83000,gz)
@@ -158,6 +165,7 @@ define Image/Build/Initramfs
        $(call Image/Build/LZMAKernel/Admboot,cas-771,gz)
        $(call Image/Build/LZMAKernel/Admboot,cas-790,gz)
        $(call Image/Build/LZMAKernel/Admboot,cas-861,gz)
+endif
 endef
 
 $(eval $(call BuildImage))
index 616e7562a88b1f0b3f8a76a5ea6a88ecb84f3050..baffe04ef1b0ca514a4aa9476d66df866dd50d54 100644 (file)
@@ -1,5 +1,5 @@
 /*
- * ADM5120 specific board support for LZMA decompressor 
+ * ADM5120 specific board support for LZMA decompressor
  *
  * Copyright (C) 2007 OpenWrt.org
  * Copyright (C) 2007 Gabor Juhos <juhosg@freemail.hu>
@@ -24,7 +24,7 @@
 #define READREG(r)     *(volatile unsigned int *)(r)
 #define WRITEREG(r,v)  *(volatile unsigned int *)(r) = v
 
-/* 
+/*
  * INTC definitions
  */
 #define INTC_BASE      0xB2200000
@@ -32,7 +32,7 @@
 /* INTC registers */
 #define INTC_REG_IRQ_DISABLE   0x0C
 
-/* 
+/*
  * UART definitions
  */
 #define UART_BASE      0xB2600000
@@ -61,7 +61,7 @@
 #define UART_FLAG_RXFF ( 1 << 6 )      /* RX FIFO full */
 #define UART_FLAG_TXFE ( 1 << 7 )      /* TX FIFO empty */
 
-/* 
+/*
  * SWITCH definitions
  */
 #define SWITCH_BASE    0xB2000000
@@ -96,8 +96,9 @@
 
 static void uart_init(void)
 {
+#if 0
        unsigned int t;
-       
+
        /* disable uart */
        UART_WRITE(UART_REG_CTRL, 0);
 
@@ -106,7 +107,7 @@ static void uart_init(void)
        UART_WRITE(UART_REG_LCRM, t);
        t = UART_READ(UART_REG_LCRL);
        UART_WRITE(UART_REG_LCRL, t);
-       
+
        /* keep data, stop, and parity bits, but disable FIFO */
        t = UART_READ(UART_REG_LCRH);
        t &= ~(UART_LCRH_FEN);
@@ -117,6 +118,7 @@ static void uart_init(void)
 
        /* enable uart, and disable interrupts */
        UART_WRITE(UART_REG_CTRL, UART_CTRL_EN);
+#endif
 }
 
 static void uart_putc(int ch)
@@ -125,7 +127,7 @@ static void uart_putc(int ch)
 
        UART_WRITE(UART_REG_DATA, ch);
 
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFF) != 0);
+       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
 }
 
 /*
@@ -150,7 +152,7 @@ static void intc_init(void)
 static void switch_init(void)
 {
        /* disable PHYS ports */
-       SWITCH_WRITE(SWITCH_REG_PORT_CONF0, 
+       SWITCH_WRITE(SWITCH_REG_PORT_CONF0,
            (SWITCH_PORTS_HW << PORT_CONF0_DP_SHIFT));
 
        /* disable CPU port */
@@ -159,7 +161,7 @@ static void switch_init(void)
        /* disable GPIO lines */
        SWITCH_WRITE(SWITCH_REG_GPIO_CONF0, 0);
        SWITCH_WRITE(SWITCH_REG_GPIO_CONF2, 0);
-       
+
        /* disable LED lines */
        SWITCH_WRITE(SWITCH_REG_PORT0_LED, 0);
        SWITCH_WRITE(SWITCH_REG_PORT1_LED, 0);
index 8088726f915b7ab4d8bd76e92294f4c73dc423e3..5772272090c2df0121df4d380920fbcf8ad500f9 100644 (file)
@@ -69,8 +69,11 @@ define Image/Build/LZMAKernel/ZyXEL
 endef
 
 define Image/Build/Initramfs
+# this line is here intentionally
+ifeq (CONFIG_DEVEL,y)
        $(call Image/Build/LZMAKernel/ZyXEL,p-334wt,bin)
        $(call Image/Build/LZMAKernel/ZyXEL,p-335,bin)
+endif
 endef
 
 $(eval $(call BuildImage))