glamo-mci: Cleanup mmc clock rate control.
authorLars-Peter Clausen <lars@metafoo.de>
Mon, 20 Jul 2009 22:55:14 +0000 (22:55 +0000)
committerLars-Peter Clausen <lars@metafoo.de>
Mon, 20 Jul 2009 22:55:14 +0000 (22:55 +0000)
SVN-Revision: 16936

target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.c
target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-core.h
target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-fb.c
target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.c
target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h [deleted file]

index 1a6adcdeae62f901739d5010d1c2fb7d22f5af1b..60cfae843f93319b2f7a49dc477d571a65b08fd0 100644 (file)
@@ -76,6 +76,7 @@ struct reg_range {
        char *name;
        char dump;
 };
+
 struct reg_range reg_range[] = {
        { 0x0000, 0x76,         "General",      1 },
        { 0x0200, 0x18,         "Host Bus",     1 },
@@ -86,7 +87,7 @@ struct reg_range reg_range[] = {
 /*             { 0x0c00, 0xcc,         "MPEG",         0 }, */
        { 0x1100, 0xb2,         "LCD 1",        1 },
        { 0x1200, 0x64,         "LCD 2",        1 },
-       { 0x1400, 0x40,         "MMC",          1 },
+       { 0x1400, 0x42,         "MMC",          1 },
 /*             { 0x1500, 0x080,        "MPU 0",        0 },
        { 0x1580, 0x080,        "MPU 1",        0 },
        { 0x1600, 0x080,        "Cmd Queue",    0 },
@@ -478,7 +479,7 @@ int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
                break;
        case GLAMO_ENGINE_2D:
                        __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_2D,
-                                          GLAMO_CLOCK_2D_EN_M7CLK |
+                                                          GLAMO_CLOCK_2D_EN_M7CLK |
                                                           GLAMO_CLOCK_2D_EN_GCLK |
                                                           GLAMO_CLOCK_2D_DG_M7CLK |
                                                           GLAMO_CLOCK_2D_DG_GCLK,
@@ -544,7 +545,40 @@ u_int16_t glamo_engine_clkreg_get(struct glamo_core *glamo,
 }
 EXPORT_SYMBOL_GPL(glamo_engine_clkreg_get);
 
-struct glamo_script reset_regs[] = {
+static const struct glamo_script engine_div_regs[__NUM_GLAMO_ENGINES] = {
+       [GLAMO_ENGINE_LCD] = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_DCLK},
+       [GLAMO_ENGINE_MMC] = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_TCLK},
+       [GLAMO_ENGINE_2D]  = {GLAMO_REG_CLOCK_GEN5_1, GLAMO_CLOCK_GEN51_EN_DIV_GCLK},
+};
+
+void glamo_engine_div_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+       uint16_t reg = engine_div_regs[engine].reg;
+       uint16_t bit = engine_div_regs[engine].val;
+       uint16_t val;
+
+       spin_lock(&glamo->lock);
+       val = __reg_read(glamo, reg);
+       __reg_write(glamo, reg, val | bit);
+       spin_unlock(&glamo->lock);
+       mdelay(5);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_div_enable);
+
+void glamo_engine_div_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+       uint16_t reg = engine_div_regs[engine].reg;
+       uint16_t bit = engine_div_regs[engine].val;
+       uint16_t val;
+
+       spin_lock(&glamo->lock);
+       val = __reg_read(glamo, reg);
+       __reg_write(glamo, reg, val & ~bit);
+       spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_div_disable);
+
+static const struct glamo_script reset_regs[] = {
        [GLAMO_ENGINE_LCD] = {
                GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
        },
@@ -572,18 +606,18 @@ struct glamo_script reset_regs[] = {
 
 void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
 {
-       struct glamo_script *rst;
+    uint16_t reg = reset_regs[engine].reg;
+    uint16_t val = reset_regs[engine].val;
 
        if (engine >= ARRAY_SIZE(reset_regs)) {
                dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
                return;
        }
 
-       rst = &reset_regs[engine];
 
        spin_lock(&glamo->lock);
-       __reg_set_bit(glamo, rst->reg, rst->val);
-       __reg_clear_bit(glamo, rst->reg, rst->val);
+       __reg_set_bit(glamo, reg, val);
+       __reg_clear_bit(glamo, reg, val);
        spin_unlock(&glamo->lock);
 }
 EXPORT_SYMBOL_GPL(glamo_engine_reset);
@@ -599,21 +633,12 @@ void glamo_lcm_reset(struct platform_device *pdev, int level)
 }
 EXPORT_SYMBOL_GPL(glamo_lcm_reset);
 
-enum glamo_pll {
-       GLAMO_PLL1,
-       GLAMO_PLL2,
-};
-
-static int glamo_pll_rate(struct glamo_core *glamo,
+int glamo_pll_rate(struct glamo_core *glamo,
                          enum glamo_pll pll)
 {
        u_int16_t reg;
-       unsigned int div = 512;
        unsigned int osci = glamo->pdata->osci_clock_rate;
 
-       if (osci == 32768)
-               div = 1;
-
        switch (pll) {
        case GLAMO_PLL1:
                reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
@@ -624,18 +649,19 @@ static int glamo_pll_rate(struct glamo_core *glamo,
        default:
                return -EINVAL;
        }
-       return (osci/div)*reg;
+       return osci*reg;
 }
+EXPORT_SYMBOL_GPL(glamo_pll_rate);
 
 int glamo_engine_reclock(struct glamo_core *glamo,
                         enum glamo_engine engine,
-                        int ps)
+                        int hz)
 {
-       int pll, khz;
-       u_int16_t reg, mask, val = 0;
+       int pll;
+       u_int16_t reg, mask, div;
 
-       if (!ps)
-               return 0;
+       if (!hz)
+               return -EINVAL;
 
        switch (engine) {
        case GLAMO_ENGINE_LCD:
@@ -643,6 +669,11 @@ int glamo_engine_reclock(struct glamo_core *glamo,
                reg = GLAMO_REG_CLOCK_GEN7;
                mask = 0xff;
                break;
+       case GLAMO_ENGINE_MMC:
+               pll = GLAMO_PLL1;
+               reg = GLAMO_REG_CLOCK_GEN8;
+               mask = 0xff;
+               break;
        default:
                dev_warn(&glamo->pdev->dev,
                         "reclock of engine 0x%x not supported\n", engine);
@@ -651,23 +682,22 @@ int glamo_engine_reclock(struct glamo_core *glamo,
        }
 
        pll = glamo_pll_rate(glamo, pll);
-       khz = 1000000000UL / ps;
 
-       if (khz)
-               val = (pll / khz) / 1000;
+       div = pll / hz;
+
+       if (div != 0 && pll / div <= hz)
+               --div;
+
+       if (div > mask)
+               div = mask;
 
        dev_dbg(&glamo->pdev->dev,
-                       "PLL %d, kHZ %d, div %d\n", pll, khz, val);
+                       "PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
 
-       if (val) {
-               val--;
-               reg_set_bit_mask(glamo, reg, mask, val);
-               mdelay(5); /* wait some time to stabilize */
+       reg_set_bit_mask(glamo, reg, mask, div);
+       mdelay(5); /* wait some time to stabilize */
 
-               return 0;
-       } else {
-               return -EINVAL;
-       }
+       return pll / (div + 1);
 }
 EXPORT_SYMBOL_GPL(glamo_engine_reclock);
 
@@ -675,7 +705,7 @@ EXPORT_SYMBOL_GPL(glamo_engine_reclock);
  * script support
  ***********************************************************************/
 
-int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
+int glamo_run_script(struct glamo_core *glamo, const struct glamo_script *script,
                     int len, int may_sleep)
 {
        int i;
@@ -746,7 +776,7 @@ int glamo_run_script(struct glamo_core *glamo, struct glamo_script *script,
 }
 EXPORT_SYMBOL(glamo_run_script);
 
-static struct glamo_script glamo_init_script[] = {
+static const struct glamo_script glamo_init_script[] = {
        { GLAMO_REG_CLOCK_HOST,         0x1000 },
                { 0xfffe, 2 },
        { GLAMO_REG_CLOCK_MEMORY,       0x1000 },
index 4675371025ff2135057a9985a08af04483b57bf9..f0c2ec3ee2ca26053f1ee193f43bb95a0defc8bf 100644 (file)
 #define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
 #define GLAMO_FB_SIZE  (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
 
+enum glamo_pll {
+    GLAMO_PLL1,
+    GLAMO_PLL2,
+};
+
 struct glamo_core {
        int irq;
        int irq_works; /* 0 means PCB does not support Glamo IRQ */
@@ -38,8 +43,14 @@ struct glamo_script {
        u_int16_t val;
 };
 
+void glamo_engine_div_enable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_div_disable(struct glamo_core *glamo, enum glamo_engine engine);
+
+
+int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll);
+
 int glamo_run_script(struct glamo_core *glamo,
-                    struct glamo_script *script, int len, int may_sleep);
+                    const struct glamo_script *script, int len, int may_sleep);
 
 int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
 int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
index 07a52517474a0f5cb2d9c2d39b65c9ffef0025a8..59491720e2730e741bfac1215304b9e75f5e0632 100644 (file)
@@ -321,7 +321,7 @@ static void glamofb_program_mode(struct glamofb_handle* gfb) {
        if (var->pixclock)
                glamo_engine_reclock(gcore,
                                     GLAMO_ENGINE_LCD,
-                                    gfb->fb->var.pixclock);
+                                    (1000000000UL / gfb->fb->var.pixclock) * 1000);
 
        reg_set_bit_mask(gfb,
                         GLAMO_REG_LCD_WIDTH,
index ef39017ec6de9e066846245a551d675a0294d2a1..37373f5d185dcb2b39f8c2701525451ada49ca99 100644 (file)
 #include <linux/crc7.h>
 #include <linux/scatterlist.h>
 #include <linux/io.h>
+#include <linux/regulator/consumer.h>
 #include <linux/mfd/glamo.h>
 
-#include "glamo-mci.h"
 #include "glamo-core.h"
 #include "glamo-regs.h"
 
 #define DRIVER_NAME "glamo-mci"
 
-static void glamo_mci_send_request(struct mmc_host *mmc);
+struct glamo_mci_host {
+       struct platform_device *pdev;
+       struct glamo_mmc_platform_data *pdata;
+       struct mmc_host        *mmc;
+       struct resource        *mmio_mem;
+       struct resource        *data_mem;
+       void __iomem           *mmio_base;
+       u16 __iomem            *data_base;
+
+       struct regulator *regulator;
+       struct mmc_request *mrq;
+
+       unsigned int clk_rate;
+
+       unsigned short vdd;
+       char           power_mode;
+
+       unsigned char request_counter;
+
+       struct timer_list disable_timer;
+
+       struct work_struct irq_work;
+
+       unsigned clk_enabled : 1;
+};
+
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request* mrq);
 static void glamo_mci_send_command(struct glamo_mci_host *host,
                                  struct mmc_command *cmd);
 
@@ -48,7 +74,7 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
  * for example
  */
 
-static int sd_max_clk = 50000000 / 3;
+static int sd_max_clk = 50000000;
 module_param(sd_max_clk, int, 0644);
 
 /*
@@ -85,35 +111,6 @@ static int sd_post_power_clock = 1000000;
 module_param(sd_post_power_clock, int, 0644);
 
 
-/*
- * SD Signal drive strength
- *
- * you can override this on kernel commandline using
- *
- *   glamo_mci.sd_drive=0
- *
- * for example
- */
-
-static int sd_drive;
-module_param(sd_drive, int, 0644);
-
-/*
- * SD allow SD clock to run while idle
- *
- * you can override this on kernel commandline using
- *
- *   glamo_mci.sd_idleclk=0
- *
- * for example
- */
-
-static int sd_idleclk = 0; /* disallow idle clock by default */
-module_param(sd_idleclk, int, 0644);
-
-/* used to stash real idleclk state in suspend: we force it to run in there */
-static int suspend_sd_idleclk;
-
 static inline void glamo_reg_write(struct glamo_mci_host *glamo,
                                u_int16_t reg, u_int16_t val)
 {
@@ -140,11 +137,34 @@ static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
        glamo_reg_write(glamo, reg, tmp);
 }
 
-static void do_pio_read(struct glamo_mci_host *host)
+static void glamo_mci_clock_disable(struct glamo_mci_host *host) {
+       if (host->clk_enabled) {
+/*             glamo_engine_div_disable(host->pdata->core, GLAMO_ENGINE_MMC);*/
+               host->clk_enabled = 0;
+        printk("clk disabled\n");
+       }
+}
+
+static void glamo_mci_clock_enable(struct glamo_mci_host *host) {
+       del_timer_sync(&host->disable_timer);
+
+       if (!host->clk_enabled) {
+               glamo_engine_div_enable(host->pdata->core, GLAMO_ENGINE_MMC);
+               host->clk_enabled = 1;
+        printk("clk enabled\n");
+       }
+}
+
+static void glamo_mci_disable_timer(unsigned long data) {
+       struct glamo_mci_host *host = (struct glamo_mci_host *)data;
+       glamo_mci_clock_disable(host);
+}
+
+
+static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
 {
        struct scatterlist *sg;
        u16 __iomem *from_ptr = host->data_base;
-       struct mmc_data *data = host->mrq->data;
        void *sg_pointer;
 
        dev_dbg(&host->pdev->dev, "pio_read():\n");
@@ -159,14 +179,13 @@ static void do_pio_read(struct glamo_mci_host *host)
        }
 
        dev_dbg(&host->pdev->dev, "pio_read(): "
-               "complete (no more data).\n");
+                       "complete (no more data).\n");
 }
 
-static void do_pio_write(struct glamo_mci_host *host)
+static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
 {
        struct scatterlist *sg;
        u16 __iomem *to_ptr = host->data_base;
-       struct mmc_data *data = host->mrq->data;
        void *sg_pointer;
 
        dev_dbg(&host->pdev->dev, "pio_write():\n");
@@ -182,117 +201,41 @@ static void do_pio_write(struct glamo_mci_host *host)
        dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
 }
 
-static void glamo_mci_fix_card_div(struct glamo_mci_host *host, int div)
-{
-       unsigned long flags;
-
-       spin_lock_irqsave(&host->pdata->core->lock, flags);
-
-       if (div < 0) {
-               /* stop clock - remove clock from divider input */
-               writew(readw(host->pdata->core->base +
-                    GLAMO_REG_CLOCK_GEN5_1) & (~GLAMO_CLOCK_GEN51_EN_DIV_TCLK),
-                    host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1);
-       } else {
-
-               if (host->force_slow_during_powerup)
-                       div = host->clk_rate / sd_post_power_clock;
-               else if (host->pdata->glamo_mmc_use_slow &&
-                        host->pdata->glamo_mmc_use_slow())
-                       div = div * sd_slow_ratio;
-
-               if (div > 255)
-                       div = 255;
-               /*
-                * set the nearest prescaler factor
-                *
-                * register shared with SCLK divisor -- no chance of race because
-                * we don't use sensor interface
-                */
-               writew((readw(host->pdata->core->base +
-                             GLAMO_REG_CLOCK_GEN8) & 0xff00) | div,
-                      host->pdata->core->base + GLAMO_REG_CLOCK_GEN8);
-               /* enable clock to divider input */
-               writew(readw(host->pdata->core->base +
-                            GLAMO_REG_CLOCK_GEN5_1) | GLAMO_CLOCK_GEN51_EN_DIV_TCLK,
-                      host->pdata->core->base + GLAMO_REG_CLOCK_GEN5_1);
-       }
-       spin_unlock_irqrestore(&host->pdata->core->lock, flags);
-       mdelay(5);
-}
-
 static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
 {
-       int div = 0;
        int real_rate = 0;
 
        if (freq) {
-               /* Set clock */
-               for (div = 0; div < 255; div++) {
-                       real_rate = host->clk_rate / (div + 1);
-                       if (real_rate <= freq)
-                               break;
-               }
-
-               host->clk_div = div;
-               glamo_mci_fix_card_div(host, div);
+               glamo_mci_clock_enable(host);
+               real_rate = glamo_engine_reclock(host->pdata->core, GLAMO_ENGINE_MMC, freq);
        } else {
-               /* stop clock */
-               host->clk_div = 0xff;
-
-               if (!sd_idleclk && !host->force_slow_during_powerup)
-                       /* clock off */
-                       glamo_mci_fix_card_div(host, -1);
+               glamo_mci_clock_disable(host);
        }
-       host->real_rate = real_rate;
+
        return real_rate;
 }
 
+static void glamo_mci_request_done(struct glamo_mci_host *host, struct
+mmc_request *mrq) {
+       mod_timer(&host->disable_timer, jiffies + HZ / 16);
 
-static void glamo_mci_irq_worker(struct work_struct *work)
-{
-       struct glamo_mci_host *host =
-                           container_of(work, struct glamo_mci_host, irq_work);
-       struct mmc_command *cmd = host->mrq->cmd;
-
-       if (cmd->data->flags & MMC_DATA_READ) {
-               do_pio_read(host);
-       }
-
-       /* issue STOP if we have been given one to use */
-       if (host->mrq->stop) {
-               glamo_mci_send_command(host, host->mrq->stop);
-       }
-
-       if (!sd_idleclk && !host->force_slow_during_powerup)
-               /* clock off */
-               glamo_mci_fix_card_div(host, -1);
-
-       host->mrq = NULL;
-       mmc_request_done(host->mmc, cmd->mrq);
+       mmc_request_done(host->mmc, mrq);
 }
 
-static irqreturn_t glamo_mci_irq(int irq, void *devid)
+
+static void glamo_mci_irq_worker(struct work_struct *work)
 {
-       struct glamo_mci_host *host = (struct glamo_mci_host*)devid;
-       u16 status;
+       struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+                                                                                               irq_work);
        struct mmc_command *cmd;
-       unsigned long flags;
+       uint16_t status;
 
-       if (host->suspending) { /* bad news, dangerous time */
-               dev_err(&host->pdev->dev, "****glamo_mci_irq before resumed\n");
-               goto leave;
-       }
+       if (!host->mrq || !host->mrq->cmd)
+               return;
 
-       if (!host->mrq)
-               goto leave;
        cmd = host->mrq->cmd;
-       if (!cmd)
-               goto leave;
-
-       spin_lock_irqsave(&host->lock, flags);
 
-       status = readw(host->mmio_base + GLAMO_REG_MMC_RB_STAT1);
+       status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
        dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
 
        /* we ignore a data timeout report if we are also told the data came */
@@ -300,36 +243,34 @@ static irqreturn_t glamo_mci_irq(int irq, void *devid)
                status &= ~GLAMO_STAT1_MMC_DTOUT;
 
        if (status & (GLAMO_STAT1_MMC_RTOUT |
-                     GLAMO_STAT1_MMC_DTOUT))
+                         GLAMO_STAT1_MMC_DTOUT))
                cmd->error = -ETIMEDOUT;
        if (status & (GLAMO_STAT1_MMC_BWERR |
-                     GLAMO_STAT1_MMC_BRERR))
+                         GLAMO_STAT1_MMC_BRERR))
                cmd->error = -EILSEQ;
        if (cmd->error) {
                dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
                goto done;
        }
 
-       /*
-        * disable the initial slow start after first bulk transfer
-        */
-       if (host->force_slow_during_powerup)
-               host->force_slow_during_powerup--;
-
-       /*
-        * we perform the memcpy out of Glamo memory outside of IRQ context
-        * so we don't block other interrupts
-        */
-       schedule_work(&host->irq_work);
+       /* issue STOP if we have been given one to use */
+       if (host->mrq->stop)
+               glamo_mci_send_command(host, host->mrq->stop);
 
-       goto unlock;
+       if (cmd->data->flags & MMC_DATA_READ)
+               do_pio_read(host, cmd->data);
 
 done:
        host->mrq = NULL;
-       mmc_request_done(host->mmc, cmd->mrq);
-unlock:
-       spin_unlock_irqrestore(&host->lock, flags);
-leave:
+       glamo_mci_request_done(host, cmd->mrq);
+}
+
+static irqreturn_t glamo_mci_irq(int irq, void *devid)
+{
+       struct glamo_mci_host *host = (struct glamo_mci_host*)devid;
+
+       schedule_work(&host->irq_work);
+
        return IRQ_HANDLED;
 }
 
@@ -341,13 +282,12 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
        unsigned int timeout = 1000000;
        u16 * reg_resp = (u16 *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
        u16 status;
+       int triggers_int = 1;
 
        /* if we can't do it, reject as busy */
-       if (!readw(host->mmio_base + GLAMO_REG_MMC_RB_STAT1) &
-            GLAMO_STAT1_MMC_IDLE) {
-               host->mrq = NULL;
+       if (!glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
+                GLAMO_STAT1_MMC_IDLE) {
                cmd->error = -EBUSY;
-               mmc_request_done(host->mmc, host->mrq);
                return;
        }
 
@@ -360,9 +300,9 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
        u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01; /* crc7 on first 5 bytes of packet */
 
        /* issue the wire-order array including CRC in register order */
-       writew((u8a[4] << 8) | u8a[5], host->mmio_base + GLAMO_REG_MMC_CMD_REG1);
-       writew((u8a[2] << 8) | u8a[3], host->mmio_base + GLAMO_REG_MMC_CMD_REG2);
-       writew((u8a[0] << 8) | u8a[1], host->mmio_base + GLAMO_REG_MMC_CMD_REG3);
+       glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
+       glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
+       glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
 
        /* command index toggle */
        fire |= (host->request_counter & 1) << 12;
@@ -440,27 +380,36 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
                         /* multiblock with stop */
                        fire |= GLAMO_FIRE_MMC_CC_MBWS;
                else
-                        /* multiblock NO stop-- 'RESERVED'? */
+                        /* multiblock NO stop-- 'RESERVED'? */
                        fire |= GLAMO_FIRE_MMC_CC_MBWNS;
                break;
        case MMC_STOP_TRANSMISSION:
                fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+               triggers_int = 0;
                break;
        default:
                fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+               triggers_int = 0;
                break;
        }
+
+       if (triggers_int)
+               host->mrq = cmd->mrq;
+
        /* always largest timeout */
-       writew(0xfff, host->mmio_base + GLAMO_REG_MMC_TIMEOUT);
+       glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
 
        /* Generate interrupt on txfer */
-       glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, ~0x3e,
-                  0x0800 | GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
-                  GLAMO_BASIC_MMC_EN_COMPL_INT | (sd_drive << 6));
+       glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
+                       0x0800 |
+                       GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+                       GLAMO_BASIC_MMC_EN_COMPL_INT |
+                       GLAMO_BASIC_MMC_EN_DATA_PUPS |
+                       GLAMO_BASIC_MMC_EN_CMD_PUP);
 
        /* send the command out on the wire */
        /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
-       writew(fire, host->mmio_base + GLAMO_REG_MMC_CMD_FIRE);
+       glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
 
        /* we are deselecting card?  because it isn't going to ack then... */
        if ((cmd->opcode == 7) && (cmd->arg == 0))
@@ -470,15 +419,14 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
         * we must spin until response is ready or timed out
         * -- we don't get interrupts unless there is a bulk rx
         */
-       udelay(5);
        do
-               status = readw(host->mmio_base + GLAMO_REG_MMC_RB_STAT1);
+               status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
        while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
                (!(status & (GLAMO_STAT1_MMC_RB_RRDY |
-                            GLAMO_STAT1_MMC_RTOUT |
-                            GLAMO_STAT1_MMC_DTOUT |
-                            GLAMO_STAT1_MMC_BWERR |
-                            GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
+                                GLAMO_STAT1_MMC_RTOUT |
+                                GLAMO_STAT1_MMC_DTOUT |
+                                GLAMO_STAT1_MMC_BWERR |
+                                GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
 
        if ((status & (GLAMO_STAT1_MMC_RTOUT |
                                   GLAMO_STAT1_MMC_DTOUT)) ||
@@ -492,17 +440,17 @@ static void glamo_mci_send_command(struct glamo_mci_host *host,
        if (cmd->flags & MMC_RSP_PRESENT) {
                if (cmd->flags & MMC_RSP_136) {
                        cmd->resp[3] = readw(&reg_resp[0]) |
-                                      (readw(&reg_resp[1]) << 16);
+                                                  (readw(&reg_resp[1]) << 16);
                        cmd->resp[2] = readw(&reg_resp[2]) |
-                                      (readw(&reg_resp[3]) << 16);
+                                                  (readw(&reg_resp[3]) << 16);
                        cmd->resp[1] = readw(&reg_resp[4]) |
-                                      (readw(&reg_resp[5]) << 16);
+                                                  (readw(&reg_resp[5]) << 16);
                        cmd->resp[0] = readw(&reg_resp[6]) |
-                                      (readw(&reg_resp[7]) << 16);
+                                                  (readw(&reg_resp[7]) << 16);
                } else {
                        cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
-                                      (readw(&reg_resp[1]) << 8) |
-                                      ((readw(&reg_resp[2])) << 24);
+                                                  (readw(&reg_resp[1]) << 8) |
+                                                  ((readw(&reg_resp[2])) << 24);
                }
        }
 }
@@ -511,28 +459,63 @@ static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
                                 struct mmc_data *data)
 {
        /* set up the block info */
-       writew(data->blksz, host->mmio_base + GLAMO_REG_MMC_DATBLKLEN);
-       writew(data->blocks, host->mmio_base + GLAMO_REG_MMC_DATBLKCNT);
-       dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
-                                  data->blksz, data->blocks);
+       glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+       glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+
        data->bytes_xfered = 0;
 
        /* if write, prep the write into the shared RAM before the command */
        if (data->flags & MMC_DATA_WRITE) {
-               do_pio_write(host);
+               do_pio_write(host, data);
+       }
+
+       dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+                                  data->blksz, data->blocks);
+       return 0;
+}
+
+static int glamo_mci_irq_poll(struct glamo_mci_host *host,
+                               struct mmc_command *cmd)
+{
+       int timeout = 1000000;
+       /*
+        * if the glamo INT# line isn't wired (*cough* it can happen)
+        * I'm afraid we have to spin on the IRQ status bit and "be
+        * our own INT# line"
+        */
+       /*
+        * we have faith we will get an "interrupt"...
+        * but something insane like suspend problems can mean
+        * we spin here forever, so we timeout after a LONG time
+        */
+       while ((!(readw(host->pdata->core->base +
+                GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
+                  (timeout--));
+
+       if (timeout < 0) {
+               if (cmd->data->error)
+                       cmd->data->error = -ETIMEDOUT;
+               dev_err(&host->pdev->dev, "Payload timeout\n");
+               return -ETIMEDOUT;
        }
+       /* ack this interrupt source */
+       writew(GLAMO_IRQ_MMC, host->pdata->core->base +
+                  GLAMO_REG_IRQ_CLEAR);
+
+       /* yay we are an interrupt controller! -- call the ISR
+        * it will stop clock to card
+        */
+       glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
+
        return 0;
 }
 
-static void glamo_mci_send_request(struct mmc_host *mmc)
+static void glamo_mci_send_request(struct mmc_host *mmc, struct mmc_request *mrq)
 {
        struct glamo_mci_host *host = mmc_priv(mmc);
-       struct mmc_request *mrq = host->mrq;
        struct mmc_command *cmd = mrq->cmd;
-       int timeout = 1000000;
 
        host->request_counter++;
-       /* this guy has data to read/write? */
        if (cmd->data) {
                if(glamo_mci_prepare_pio(host, cmd->data)) {
                        cmd->data->error = -EIO;
@@ -545,11 +528,7 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
                 cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
                 cmd->flags);
 
-       /* resume requested clock rate
-        * scale it down by sd_slow_ratio if platform requests it
-        */
-       glamo_mci_fix_card_div(host, host->clk_div);
-
+       glamo_mci_clock_enable(host);
        glamo_mci_send_command(host, cmd);
 
        /*
@@ -558,6 +537,12 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
        if (!cmd->data || cmd->error)
                goto done;
 
+
+       if (!host->pdata->core->irq_works) {
+               if (glamo_mci_irq_poll(host, mrq->cmd))
+                       goto done;
+       }
+
        /*
         * Otherwise can can use the interrupt as async completion --
         * if there is read data coming, or we wait for write data to complete,
@@ -565,95 +550,30 @@ static void glamo_mci_send_request(struct mmc_host *mmc)
         * will service it
         */
        dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
-       /*
-        * if the glamo INT# line isn't wired (*cough* it can happen)
-        * I'm afraid we have to spin on the IRQ status bit and "be
-        * our own INT# line"
-        */
-       if (!host->pdata->core->irq_works) {
-               /*
-                * we have faith we will get an "interrupt"...
-                * but something insane like suspend problems can mean
-                * we spin here forever, so we timeout after a LONG time
-                */
-               while ((!(readw(host->pdata->core->base +
-                        GLAMO_REG_IRQ_STATUS) & GLAMO_IRQ_MMC)) &&
-                      (timeout--));
-
-               if (timeout < 0) {
-                       if (cmd->data->error)
-                               cmd->data->error = -ETIMEDOUT;
-                       dev_err(&host->pdev->dev, "Payload timeout\n");
-                       goto bail;
-               }
-               /* ack this interrupt source */
-               writew(GLAMO_IRQ_MMC, host->pdata->core->base +
-                      GLAMO_REG_IRQ_CLEAR);
-
-               /* yay we are an interrupt controller! -- call the ISR
-                * it will stop clock to card
-                */
-               glamo_mci_irq(IRQ_GLAMO(GLAMO_IRQIDX_MMC), host);
-       }
        return;
 done:
-       host->mrq = NULL;
-       mmc_request_done(host->mmc, cmd->mrq);
-bail:
-       if (!sd_idleclk && !host->force_slow_during_powerup)
-               /* stop the clock to card */
-               glamo_mci_fix_card_div(host, -1);
+       glamo_mci_request_done(host, mrq);
 }
 
-static void glamo_mci_request(struct mmc_host *mmc, struct mmc_request *mrq)
-{
-       struct glamo_mci_host *host = mmc_priv(mmc);
-
-       host->mrq = mrq;
-       glamo_mci_send_request(mmc);
-}
-
-static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
-{
-       struct glamo_mci_host *host = mmc_priv(mmc);
-       int bus_width = 0;
-       int powering = 0;
+static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
+                               unsigned char power_mode) {
        int ret;
 
-       if (host->suspending) {
-               dev_err(&host->pdev->dev, "IGNORING glamo_mci_set_ios while "
-                                                                "suspended\n");
+       if (power_mode == host->power_mode)
                return;
-       }
 
-       /* Set power */
-       switch(ios->power_mode) {
+       switch(power_mode) {
        case MMC_POWER_UP:
-               ret = regulator_enable(host->regulator);
-               if (ret)
-                       dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
+               if (host->power_mode == MMC_POWER_OFF) {
+                       ret = regulator_enable(host->regulator);
+                       if (ret)
+                               dev_err(&host->pdev->dev, "Failed to enable regulator: %d\n", ret);
+               }
                break;
        case MMC_POWER_ON:
-               /*
-                * we should use very slow clock until first bulk
-                * transfer completes OK
-                */
-               host->force_slow_during_powerup = 1;
-
-               if (host->power_mode_current == MMC_POWER_OFF) {
-                       glamo_engine_enable(host->pdata->core,
-                                                             GLAMO_ENGINE_MMC);
-                       powering = 1;
-               }
                break;
-
        case MMC_POWER_OFF:
        default:
-               if (host->power_mode_current == MMC_POWER_OFF)
-                       break;
-               /* never want clocking with dead card */
-               glamo_mci_fix_card_div(host, -1);
-
                glamo_engine_disable(host->pdata->core,
                                     GLAMO_ENGINE_MMC);
 
@@ -662,44 +582,50 @@ static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
                        dev_warn(&host->pdev->dev, "Failed to disable regulator: %d\n", ret);
                break;
        }
-       host->power_mode_current = ios->power_mode;
+       host->power_mode = power_mode;
+}
 
-       if (host->vdd_current != ios->vdd) {
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+       struct glamo_mci_host *host = mmc_priv(mmc);
+       int bus_width = 0;
+       int rate;
+       int sd_drive;
+       int ret;
+
+       /* Set power */
+       glamo_mci_set_power_mode(host, ios->power_mode);
+
+       if (host->vdd != ios->vdd) {
                ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
                if (ret)
                        dev_err(&host->pdev->dev, "Failed to set regulator voltage: %d\n", ret);
                else
-                       host->vdd_current = ios->vdd;
+                       host->vdd = ios->vdd;
        }
-       glamo_mci_set_card_clock(host, ios->clock);
-
-       /* after power-up, we are meant to give it >= 74 clocks so it can
-        * initialize itself.  Doubt any modern cards need it but anyway...
-        */
-       if (powering)
-               mdelay(1);
-
-       if (!sd_idleclk && !host->force_slow_during_powerup)
-               /* stop the clock to card, because we are idle until transfer */
-               glamo_mci_fix_card_div(host, -1);
+       rate = glamo_mci_set_card_clock(host, ios->clock);
 
        if ((ios->power_mode == MMC_POWER_ON) ||
            (ios->power_mode == MMC_POWER_UP)) {
                dev_info(&host->pdev->dev,
-                       "powered (vdd = %d) clk: %lukHz div=%d (req: %ukHz). "
-                       "Bus width=%d\n",(int)ios->vdd,
-                       host->real_rate / 1000, (int)host->clk_div,
+                       "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
+                       "Bus width=%d\n", ios->vdd,
+                       rate / 1000, 0,
                        ios->clock / 1000, (int)ios->bus_width);
-       } else
+       } else {
                dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+       }
 
        /* set bus width */
        if (ios->bus_width == MMC_BUS_WIDTH_4)
                bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+
+       sd_drive = (rate * 4) / host->clk_rate;
+       if (sd_drive > 3)
+               sd_drive = 3;
+
        glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
-                                              GLAMO_BASIC_MMC_EN_4BIT_DATA |
-                                              GLAMO_BASIC_MMC_EN_DR_STR0 |
-                                              GLAMO_BASIC_MMC_EN_DR_STR1,
+                                              GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
                                                   bus_width | sd_drive << 6);
 }
 
@@ -713,7 +639,7 @@ static int glamo_mci_get_ro(struct mmc_host *mmc)
 }
 
 static struct mmc_host_ops glamo_mci_ops = {
-       .request        = glamo_mci_request,
+       .request        = glamo_mci_send_request,
        .set_ios        = glamo_mci_set_ios,
        .get_ro         = glamo_mci_get_ro,
 };
@@ -736,9 +662,9 @@ static int glamo_mci_probe(struct platform_device *pdev)
        host->mmc = mmc;
        host->pdev = pdev;
        host->pdata = pdev->dev.platform_data;
-       host->power_mode_current = MMC_POWER_OFF;
+       host->power_mode = MMC_POWER_OFF;
+       host->clk_enabled = 0;
 
-       spin_lock_init(&host->lock);
        INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
 
        host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
@@ -810,9 +736,8 @@ static int glamo_mci_probe(struct platform_device *pdev)
        }
 
 
-       host->vdd_current = 0;
-       host->clk_rate = 50000000; /* really it's 49152000 */
-       host->clk_div = 16;
+       host->vdd = 0;
+       host->clk_rate = glamo_pll_rate(host->pdata->core, GLAMO_PLL1);
 
        /* explain our host controller capabilities */
        mmc->ops       = &glamo_mci_ops;
@@ -821,7 +746,7 @@ static int glamo_mci_probe(struct platform_device *pdev)
                         MMC_CAP_MMC_HIGHSPEED |
                         MMC_CAP_SD_HIGHSPEED;
        mmc->f_min     = host->clk_rate / 256;
-       mmc->f_max     = sd_max_clk;
+       mmc->f_max     = host->clk_rate;
 
        mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
        mmc->max_blk_size  = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
@@ -841,21 +766,24 @@ static int glamo_mci_probe(struct platform_device *pdev)
        glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC);
        glamo_engine_reset(host->pdata->core, GLAMO_ENGINE_MMC);
 
+       glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+                       (u16)(host->data_mem->start));
+       glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+                       (u16)(host->data_mem->start >> 16));
+
+       glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+                       (u16)(host->data_mem->start));
+       glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+                       (u16)(host->data_mem->start >> 16));
+
+       setup_timer(&host->disable_timer, glamo_mci_disable_timer,
+                               (unsigned long)host);
+
        if ((ret = mmc_add_host(mmc))) {
                dev_err(&pdev->dev, "failed to add mmc host.\n");
                goto probe_freeirq;
        }
 
-       writew((u16)(host->data_mem->start),
-              host->mmio_base + GLAMO_REG_MMC_WDATADS1);
-       writew((u16)((host->data_mem->start) >> 16),
-              host->mmio_base + GLAMO_REG_MMC_WDATADS2);
-
-       writew((u16)host->data_mem->start, host->mmio_base +
-              GLAMO_REG_MMC_RDATADS1);
-       writew((u16)(host->data_mem->start >> 16), host->mmio_base +
-              GLAMO_REG_MMC_RDATADS2);
-
        dev_info(&pdev->dev,"initialisation done.\n");
        return 0;
 
@@ -904,51 +832,41 @@ static int glamo_mci_remove(struct platform_device *pdev)
 static int glamo_mci_suspend(struct platform_device *dev, pm_message_t state)
 {
        struct mmc_host *mmc = platform_get_drvdata(dev);
-       struct glamo_mci_host   *host = mmc_priv(mmc);
+       struct glamo_mci_host *host = mmc_priv(mmc);
        int ret;
 
        cancel_work_sync(&host->irq_work);
 
-       /*
-        * possible workaround for SD corruption during suspend - resume
-        * make sure the clock was running during suspend and consequently
-        * resume
-        */
-       glamo_mci_fix_card_div(host, host->clk_div);
-
-       /* we are going to do more commands to override this in
-        * mmc_suspend_host(), so we need to change sd_idleclk for the
-        * duration as well
-        */
-       suspend_sd_idleclk = sd_idleclk;
-       sd_idleclk = 1;
-
        ret = mmc_suspend_host(mmc, state);
-
-       host->suspending++;
+       glamo_mci_clock_enable(host);
 
        return ret;
 }
 
-int glamo_mci_resume(struct platform_device *dev)
+static int glamo_mci_resume(struct platform_device *dev)
 {
        struct mmc_host *mmc = platform_get_drvdata(dev);
-       struct glamo_mci_host   *host = mmc_priv(mmc);
+       struct glamo_mci_host *host = mmc_priv(mmc);
        int ret;
 
-       sd_idleclk = 1;
+    glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC);
+    glamo_engine_reset(host->pdata->core, GLAMO_ENGINE_MMC);
 
-       glamo_engine_enable(host->pdata->core, GLAMO_ENGINE_MMC);
-       glamo_engine_reset(host->pdata->core, GLAMO_ENGINE_MMC);
-
-       host->suspending--;
+       glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+                       (u16)(host->data_mem->start));
+       glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+                       (u16)(host->data_mem->start >> 16));
 
-       ret = mmc_resume_host(mmc);
+       glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+                       (u16)(host->data_mem->start));
+       glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+                       (u16)(host->data_mem->start >> 16));
+    mdelay(5);
 
-       /* put sd_idleclk back to pre-suspend state */
-       sd_idleclk = suspend_sd_idleclk;
+       ret = mmc_resume_host(host->mmc);
+/*     glamo_mci_clock_disable(host);*/
 
-       return ret;
+       return 0;
 }
 EXPORT_SYMBOL_GPL(glamo_mci_resume);
 
diff --git a/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h b/target/linux/s3c24xx/files-2.6.30/drivers/mfd/glamo/glamo-mci.h
deleted file mode 100644 (file)
index 52c3fe3..0000000
+++ /dev/null
@@ -1,43 +0,0 @@
-/*
- *  linux/drivers/mmc/host/glamo-mmc.h - GLAMO MCI driver
- *
- *  Copyright (C) 2007-2008 Openmoko, Inc, Andy Green <andy@openmoko.com>
- *   based on S3C MMC driver -->
- *  Copyright (C) 2004-2006 Thomas Kleffel, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include <linux/regulator/consumer.h>
-
-struct glamo_mci_host {
-       struct platform_device *pdev;
-       struct glamo_mmc_platform_data *pdata;
-       struct mmc_host        *mmc;
-       struct resource        *mmio_mem;
-       struct resource        *data_mem;
-       void __iomem           *mmio_base;
-       u16 __iomem            *data_base;
-
-       int suspending;
-
-       int          power_mode_current;
-       unsigned int vdd_current;
-
-       unsigned long clk_rate;
-       unsigned long clk_div;
-       unsigned long real_rate;
-
-       int force_slow_during_powerup;
-
-       struct mmc_request *mrq;
-       struct work_struct  irq_work;
-
-       spinlock_t lock;
-
-       unsigned int request_counter;
-
-       struct regulator *regulator;
-};