remove 2.6.25 specific stuff
authorGabor Juhos <juhosg@openwrt.org>
Sat, 13 Sep 2008 17:32:20 +0000 (17:32 +0000)
committerGabor Juhos <juhosg@openwrt.org>
Sat, 13 Sep 2008 17:32:20 +0000 (17:32 +0000)
SVN-Revision: 12598

85 files changed:
package/kernel/modules/other.mk
target/linux/adm5120/Makefile
target/linux/adm5120/files/arch/mips/adm5120/Kconfig [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/Makefile [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/board.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/clock.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/gpio.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/irq.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/memory.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/platform.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/reset.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/setup.c [deleted file]
target/linux/adm5120/files/arch/mips/adm5120/time.c [deleted file]
target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c [deleted file]
target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c [deleted file]
target/linux/adm5120/files/drivers/leds/leds-adm5120.c [deleted file]
target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c [deleted file]
target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c [deleted file]
target/linux/adm5120/files/drivers/mtd/myloader.c [deleted file]
target/linux/adm5120/files/drivers/mtd/trxsplit.c [deleted file]
target/linux/adm5120/files/drivers/net/adm5120sw.c [deleted file]
target/linux/adm5120/files/drivers/net/adm5120sw.h [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120-q.c [deleted file]
target/linux/adm5120/files/drivers/usb/host/adm5120.h [deleted file]
target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h [deleted file]
target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h [deleted file]
target/linux/adm5120/patches/001-adm5120.patch [deleted file]
target/linux/adm5120/patches/002-adm5120_flash.patch [deleted file]
target/linux/adm5120/patches/003-adm5120_switch.patch [deleted file]
target/linux/adm5120/patches/005-adm5120_usb.patch [deleted file]
target/linux/adm5120/patches/006-adm5120_leds.patch [deleted file]
target/linux/adm5120/patches/007-adm5120_pci.patch [deleted file]
target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch [deleted file]
target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch [deleted file]
target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch [deleted file]
target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch [deleted file]
target/linux/adm5120/patches/103-mtd_trxsplit.patch [deleted file]
target/linux/adm5120/patches/120-rb153_cf_driver.patch [deleted file]
target/linux/adm5120/patches/140-cmdline_hack.patch [deleted file]
target/linux/adm5120/patches/200-amba_pl010_hacks.patch [deleted file]
target/linux/adm5120/patches/201-amba_bus_hacks.patch [deleted file]
target/linux/adm5120/patches/202-pci_disable_common_quirks.patch [deleted file]
target/linux/adm5120/patches/203-gpio_leds_brightness.patch [deleted file]
target/linux/adm5120/patches/310-adm5120_wdt.patch [deleted file]

index 6ee81dd3635a06ab03fe922a86a79439b7975661..ddf2d428afd097aa3038d90a1e15e13926810e96 100644 (file)
@@ -321,22 +321,6 @@ endef
 $(eval $(call KernelPackage,leds-gpio))
 
 
-define KernelPackage/leds-adm5120
-  SUBMENU:=$(OTHER_MENU)
-  TITLE:=ADM5120 LED support
-  DEPENDS:=@TARGET_adm5120 +kmod-leds-gpio @LINUX_2_6_25
-  KCONFIG:=CONFIG_LEDS_ADM5120
-  FILES:=$(LINUX_DIR)/drivers/leds/leds-adm5120.$(LINUX_KMOD_SUFFIX)
-  AUTOLOAD:=$(call AutoLoad,59,leds-adm5120)
-endef
-
-define KernelPackage/leds-adm5120/description
- Kernel module for LEDs on ADM5120 based boards.
-endef
-
-$(eval $(call KernelPackage,leds-adm5120))
-
-
 define KernelPackage/ledtrig-adm5120-switch
   SUBMENU:=$(OTHER_MENU)
   TITLE:=LED ADM5120 Switch Port Status Trigger
index 2947308f8e9a889602300e5996a8c596f646a017..5709a58cdb812341ec34727bd697546b2e7be39d 100644 (file)
@@ -1,5 +1,5 @@
 #
-# Copyright (C) 2007,2008 OpenWrt.org
+# Copyright (C) 2007-2008 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -9,7 +9,6 @@ include $(TOPDIR)/rules.mk
 
 BOARD:=adm5120
 BOARDNAME:=Infineon/ADMtek ADM5120
-#LINUX_VERSION:=2.6.25.16
 LINUX_VERSION:=2.6.26.3
 SUBTARGETS:=router_le router_be
 INITRAMFS_EXTRA_FILES:=
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Kconfig b/target/linux/adm5120/files/arch/mips/adm5120/Kconfig
deleted file mode 100644 (file)
index 7738d81..0000000
+++ /dev/null
@@ -1,20 +0,0 @@
-if MIPS_ADM5120
-
-menu "ADM5120 Implementation Options"
-
-config ADM5120_CPU_OVERRIDES
-       bool "Enable CPU feature overrides"
-       default y
-
-config PCI_ADM5120
-       bool "Enable PCI support"
-       select PCI
-       default y
-
-endmenu
-
-config ARM_AMBA
-       bool
-       default y
-
-endif
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/Makefile
deleted file mode 100644 (file)
index 2a5f391..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-obj-y  := setup.o prom.o irq.o memory.o adm5120_info.o
-obj-y  += board.o
-obj-y  += clock.o
-obj-y  += gpio.o
-obj-y  += platform.o
-obj-y  += reset.o
-obj-y  += time.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c b/target/linux/adm5120/files/arch/mips/adm5120/adm5120_info.c
deleted file mode 100644 (file)
index 99ec2fc..0000000
+++ /dev/null
@@ -1,80 +0,0 @@
-/*
- *  $Id$
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-unsigned int adm5120_product_code;
-unsigned int adm5120_revision;
-unsigned int adm5120_package;
-unsigned int adm5120_nand_boot;
-unsigned long adm5120_speed;
-
-/*
- * CPU settings detection
- */
-#define CODE_GET_PC(c)         ((c) & CODE_PC_MASK)
-#define CODE_GET_REV(c)                (((c) >> CODE_REV_SHIFT) & CODE_REV_MASK)
-#define CODE_GET_PK(c)         (((c) >> CODE_PK_SHIFT) & CODE_PK_MASK)
-#define CODE_GET_CLKS(c)       (((c) >> CODE_CLKS_SHIFT) & CODE_CLKS_MASK)
-#define CODE_GET_NAB(c)                (((c) & CODE_NAB) != 0)
-
-void adm5120_ndelay(u32 ns)
-{
-       u32     t;
-
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-
-       t = (ns+640) / 640;
-       t &= TIMER_PERIOD_MASK;
-       SW_WRITE_REG(SWITCH_REG_TIMER, t | TIMER_TE);
-
-       /* wait until the timer expires */
-       do {
-               t = SW_READ_REG(SWITCH_REG_TIMER_INT);
-       } while ((t & TIMER_INT_TOS) == 0);
-
-       /* leave the timer disabled */
-       SW_WRITE_REG(SWITCH_REG_TIMER, TIMER_PERIOD_DEFAULT);
-       SW_WRITE_REG(SWITCH_REG_TIMER_INT, (TIMER_INT_TOS | TIMER_INT_TOM));
-}
-
-void __init adm5120_soc_init(void)
-{
-       u32 code;
-       u32 clks;
-
-       code = SW_READ_REG(SWITCH_REG_CODE);
-
-       adm5120_product_code = CODE_GET_PC(code);
-       adm5120_revision = CODE_GET_REV(code);
-       adm5120_package = (CODE_GET_PK(code) == CODE_PK_BGA) ?
-               ADM5120_PACKAGE_BGA : ADM5120_PACKAGE_PQFP;
-       adm5120_nand_boot = CODE_GET_NAB(code);
-
-       clks = CODE_GET_CLKS(code);
-       adm5120_speed = ADM5120_SPEED_175;
-       if (clks & 1)
-               adm5120_speed += 25000000;
-       if (clks & 2)
-               adm5120_speed += 50000000;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/board.c b/target/linux/adm5120/files/arch/mips/adm5120/board.c
deleted file mode 100644 (file)
index 2cbc8f2..0000000
+++ /dev/null
@@ -1,118 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 generic board code
- *
- *  Copyright (C) 2007,2008 OpenWrt.org
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <asm/bootinfo.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-
-#define PFX    "adm5120: "
-
-static struct list_head adm5120_boards __initdata =
-                       LIST_HEAD_INIT(adm5120_boards);
-static char adm5120_board_name[ADM5120_BOARD_NAMELEN];
-
-const char *get_system_type(void)
-{
-       return adm5120_board_name;
-}
-
-static struct adm5120_board * __init adm5120_board_find(unsigned long machtype)
-{
-       struct list_head *this;
-       struct adm5120_board *board;
-       void *ret;
-
-       ret = NULL;
-       list_for_each(this, &adm5120_boards) {
-               board = list_entry(this, struct adm5120_board, list);
-               if (board->mach_type == machtype) {
-                       ret = board;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-static int __init adm5120_board_setup(void)
-{
-       struct adm5120_board *board;
-       int err;
-
-       board = adm5120_board_find(mips_machtype);
-       if (board == NULL) {
-               printk(KERN_ALERT PFX "no board registered for "
-                       "machtype %lu, trying generic\n", mips_machtype);
-               board = adm5120_board_find(MACH_ADM5120_GENERIC);
-               if (board == NULL)
-                       panic(PFX "unsupported board\n");
-       }
-
-       printk(KERN_INFO PFX "board is '%s'\n", board->name);
-
-       memcpy(&adm5120_board_name, board->name, ADM5120_BOARD_NAMELEN);
-
-       adm5120_gpio_init();
-
-       adm5120_board_reset = board->board_reset;
-       if (board->eth_num_ports > 0)
-               adm5120_eth_num_ports = board->eth_num_ports;
-
-       if (board->eth_vlans)
-               memcpy(adm5120_eth_vlans, board->eth_vlans,
-                       sizeof(adm5120_eth_vlans));
-
-       if (board->board_setup)
-               board->board_setup();
-
-       /* register UARTs */
-       amba_device_register(&adm5120_uart0_device, &iomem_resource);
-       amba_device_register(&adm5120_uart1_device, &iomem_resource);
-
-       /* register built-in ethernet switch */
-       platform_device_register(&adm5120_switch_device);
-
-       if (adm5120_package_pqfp())
-               adm5120_gpiodev_resource.start &= ~0xf0;
-
-       platform_device_register(&adm5120_gpiodev_device);
-
-       /* setup PCI irq map */
-       adm5120_pci_set_irq_map(board->pci_nr_irqs, board->pci_irq_map);
-
-       /* register board devices */
-       if (board->num_devices > 0 && board->devices != NULL) {
-               err = platform_add_devices(board->devices, board->num_devices);
-               if (err)
-                       printk(KERN_ALERT PFX "adding board devices failed\n");
-       }
-
-       return 0;
-}
-arch_initcall(adm5120_board_setup);
-
-void __init adm5120_board_register(struct adm5120_board *board)
-{
-       list_add_tail(&board->list, &adm5120_boards);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/boards/Makefile
deleted file mode 100644 (file)
index a05c891..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
-#
-# Makefile for platforms based on ADM5120 SoC
-#
-
-obj-y  += generic.o
-obj-y  += cellvision.o
-obj-y  += compex.o
-obj-y  += edimax.o
-obj-y  += infineon.o
-obj-y  += mikrotik.o
-obj-y  += zyxel.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/cellvision.c
deleted file mode 100644 (file)
index d3e7c7d..0000000
+++ /dev/null
@@ -1,208 +0,0 @@
-/*
- *  $Id$
- *
- *  Cellvision/SparkLAN boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define CAS6XX_GPIO_DEV_MASK   (1 << ADM5120_GPIO_PIN5)
-#define CAS7XX_GPIO_DEV_MASK   (1 << ADM5120_GPIO_PIN5)
-#define NFS_GPIO_DEV_MASK      (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-static struct adm5120_pci_irq cas771_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition cas6xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs1",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "nvfs2",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition cas7xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "nvfs",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 128*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct platform_device *cas6xx_devices[] __initdata = {
-       &adm5120_flash0_device,
-};
-
-static struct platform_device *cas7xx_devices[] __initdata = {
-       &adm5120_flash0_device,
-};
-
-static void __init cas6xx_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL);  /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-       adm5120_flash0_data.parts = cas6xx_partitions;
-
-       adm5120_gpiodev_resource.start &= ~CAS6XX_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-static void __init cas7xx_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL);  /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas7xx_partitions);
-       adm5120_flash0_data.parts = cas7xx_partitions;
-
-       adm5120_gpiodev_resource.start &= ~CAS7XX_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-static void __init nfs_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL);  /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(cas6xx_partitions);
-       adm5120_flash0_data.parts = cas6xx_partitions;
-
-       adm5120_gpiodev_resource.start &= ~NFS_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-unsigned char nfs_vlans[6] = { /* TODO: not tested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(CAS630, "Cellvision CAS-630/630W")
-       .board_setup    = cas6xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas6xx_devices),
-       .devices        = cas6xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS670, "Cellvision CAS-670/670W")
-       .board_setup    = cas6xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas6xx_devices),
-       .devices        = cas6xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS700, "Cellvision CAS-700/700W")
-       .board_setup    = cas7xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas7xx_devices),
-       .devices        = cas7xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS771, "Cellvision CAS-771/771W")
-       .board_setup    = cas7xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas7xx_devices),
-       .devices        = cas7xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(cas771_pci_irqs),
-       .pci_irq_map    = cas771_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS790, "Cellvision CAS-790")
-       .board_setup    = cas7xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas7xx_devices),
-       .devices        = cas7xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(CAS861, "Cellvision CAS-861/861W")
-       .board_setup    = cas7xx_setup,
-       .eth_num_ports  = 1,
-       .num_devices    = ARRAY_SIZE(cas7xx_devices),
-       .devices        = cas7xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NFS101U, "Cellvision NFS-101U/101WU")
-       .board_setup    = nfs_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = nfs_vlans,
-       .num_devices    = ARRAY_SIZE(cas6xx_devices),
-       .devices        = cas6xx_devices,
-       /* TODO: PCI IRQ map */
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/compex.c
deleted file mode 100644 (file)
index 71fa17d..0000000
+++ /dev/null
@@ -1,240 +0,0 @@
-/*
- *  $Id$
- *
- *  Compex boards
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define NP27G_GPIO_DEV_MASK    (1 << ADM5120_GPIO_PIN5)
-#define NP28G_GPIO_DEV_MASK    ( 1 << ADM5120_GPIO_PIN5 \
-                               | 1 << ADM5120_GPIO_PIN4)
-
-#define WP54_GPIO_DEV_MASK     ( 1 << ADM5120_GPIO_PIN5 \
-                               | 1 << ADM5120_GPIO_PIN3)
-
-static struct adm5120_pci_irq wp54_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct adm5120_pci_irq np28g_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(3, 1, 2, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 2, 3, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition wp54g_wrt_partitions[] = {
-       {
-               .name   = "cfe",
-               .offset = 0,
-               .size   = 0x050000,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x3A0000,
-       } , {
-               .name   = "nvram",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 0x010000,
-       }
-};
-
-static struct platform_device *np2xg_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_hcd_device,
-};
-
-static struct platform_device *wp54_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_buttons_device,
-};
-
-unsigned char np27g_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-unsigned char np28g_vlans[6] __initdata = {
-       0x50, 0x42, 0x44, 0x48, 0x00, 0x00
-};
-
-unsigned char wp54_vlans[6] __initdata = {
-       0x41, 0x42, 0x00, 0x00, 0x00, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-static void wp54_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN3, 0);
-}
-
-static void np28g_reset(void)
-{
-       gpio_set_value(ADM5120_GPIO_PIN4, 0);
-}
-
-static void __init np27g_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_gpiodev_resource.start &= ~NP27G_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-static void __init np28g_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       gpio_request(ADM5120_GPIO_PIN4, NULL); /* for system reset */
-       gpio_direction_output(ADM5120_GPIO_PIN4, 1);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_gpiodev_resource.start &= ~NP28G_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-static void __init wp54_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       gpio_request(ADM5120_GPIO_PIN3, NULL); /* for system reset */
-       gpio_direction_output(ADM5120_GPIO_PIN3, 1);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-
-       adm5120_buttons_data.nbuttons = 1;
-       adm5120_buttons[0].desc = "reset button";
-       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN4;
-
-       adm5120_gpiodev_resource.start &= ~WP54_GPIO_DEV_MASK;
-
-       /* TODO: setup mac address */
-}
-
-static void __init wp54_wrt_setup(void)
-{
-       wp54_setup();
-
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(wp54g_wrt_partitions);
-       adm5120_flash0_data.parts = wp54g_wrt_partitions;
-
-       /* TODO: setup mac address */
-}
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(NP27G, "Compex NetPassage 27G")
-       .board_setup    = np27g_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = np27g_vlans,
-       .num_devices    = ARRAY_SIZE(np2xg_devices),
-       .devices        = np2xg_devices,
-       /* TODO: add PCI IRQ map */
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(NP28G, "Compex NetPassage 28G")
-       .board_setup    = np28g_setup,
-       .board_reset    = np28g_reset,
-       .eth_num_ports  = 4,
-       .eth_vlans      = np28g_vlans,
-       .num_devices    = ARRAY_SIZE(np2xg_devices),
-       .devices        = np2xg_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(np28g_pci_irqs),
-       .pci_irq_map    = np28g_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54AG, "Compex WP54AG")
-       .board_setup    = wp54_setup,
-       .board_reset    = wp54_reset,
-       .eth_num_ports  = 2,
-       .eth_vlans      = wp54_vlans,
-       .num_devices    = ARRAY_SIZE(wp54_devices),
-       .devices        = wp54_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(wp54_pci_irqs),
-       .pci_irq_map    = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G, "Compex WP54G")
-       .board_setup    = wp54_setup,
-       .board_reset    = wp54_reset,
-       .eth_num_ports  = 2,
-       .eth_vlans      = wp54_vlans,
-       .num_devices    = ARRAY_SIZE(wp54_devices),
-       .devices        = wp54_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(wp54_pci_irqs),
-       .pci_irq_map    = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WP54G_WRT, "Compex WP54G-WRT")
-       .board_setup    = wp54_wrt_setup,
-       .board_reset    = wp54_reset,
-       .eth_num_ports  = 2,
-       .eth_vlans      = wp54_vlans,
-       .num_devices    = ARRAY_SIZE(wp54_devices),
-       .devices        = wp54_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(wp54_pci_irqs),
-       .pci_irq_map    = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54AG, "Compex WPP54AG")
-       .board_setup    = wp54_setup,
-       .board_reset    = wp54_reset,
-       .eth_num_ports  = 2,
-       .eth_vlans      = wp54_vlans,
-       .num_devices    = ARRAY_SIZE(wp54_devices),
-       .devices        = wp54_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(wp54_pci_irqs),
-       .pci_irq_map    = wp54_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(WPP54G, "Compex WPP54G")
-       .board_setup    = wp54_setup,
-       .board_reset    = wp54_reset,
-       .eth_num_ports  = 2,
-       .eth_vlans      = wp54_vlans,
-       .num_devices    = ARRAY_SIZE(wp54_devices),
-       .devices        = wp54_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(wp54_pci_irqs),
-       .pci_irq_map    = wp54_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/edimax.c
deleted file mode 100644 (file)
index 65023ab..0000000
+++ /dev/null
@@ -1,90 +0,0 @@
-/*
- *  $Id$
- *
- *  Edimax boards
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_irq.h>
-#include <adm5120_platform.h>
-
-static struct adm5120_pci_irq br61xx_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct mtd_partition br61xx_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 32*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "config",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 32*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct platform_device *br6104k_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_hcd_device,
-       &adm5120_buttons_device,
-};
-
-static struct platform_device *br61x4wg_devices[] __initdata = {
-       &adm5120_flash0_device,
-};
-
-static void __init br61xx_setup(void) {
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(br61xx_partitions);
-       adm5120_flash0_data.parts = br61xx_partitions;
-
-       adm5120_buttons_data.nbuttons = 1;
-       adm5120_buttons[0].desc = "reset button";
-       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN2;
-
-       /* TODO: setup mac addresses, if possible */
-}
-
-unsigned char br61xx_vlans[6] = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(BR6104K, "Edimax BR-6104K/6104KP")
-       .board_setup    = br61xx_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = br61xx_vlans,
-       .num_devices    = ARRAY_SIZE(br6104k_devices),
-       .devices        = br6104k_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(BR61x4WG, "Edimax BR-6104WG/6114WG")
-       .board_setup    = br61xx_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = br61xx_vlans,
-       .num_devices    = ARRAY_SIZE(br61x4wg_devices),
-       .devices        = br61x4wg_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(br61xx_pci_irqs),
-       .pci_irq_map    = br61xx_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/generic.c
deleted file mode 100644 (file)
index e120577..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic ADM5120 based board
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-
-static struct platform_device *generic_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_hcd_device,
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(GENERIC, "Generic ADM5120 board")
-       .eth_num_ports  = 6,
-       .num_devices    = ARRAY_SIZE(generic_devices),
-       .devices        = generic_devices,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/infineon.c
deleted file mode 100644 (file)
index c8680d6..0000000
+++ /dev/null
@@ -1,160 +0,0 @@
-/*
- *  $Id$
- *
- *  Infineon boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_info.h>
-
-#define EASY_PQFP_GPIO_DEV_MASK        (1 << ADM5120_GPIO_PIN3)
-#define EASY_BGA_GPIO_DEV_MASK (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio3(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN3, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN3, 1);
-               break;
-       }
-}
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-static struct mtd_partition easy_partitions[] = {
-       {
-               .name   = "admboot",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "boardcfg",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 64*1024,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct adm5120_pci_irq easy5120rt_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct platform_device *easy5120pata_devices[] __initdata = {
-       &adm5120_flash0_device,
-       /* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy5120rt_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_hcd_device,
-};
-
-static struct platform_device *easy5120wvoip_devices[] __initdata = {
-       &adm5120_flash0_device,
-       /* TODO: add VINETIC2 device? */
-};
-
-static struct platform_device *easy83000_devices[] __initdata = {
-       &adm5120_flash0_device,
-       /* TODO: add VINAX device? */
-};
-
-static void __init easy_setup_pqfp(void)
-{
-       gpio_request(ADM5120_GPIO_PIN3, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN3, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio3;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_gpiodev_resource.start &= ~EASY_PQFP_GPIO_DEV_MASK;
-
-       /* TODO: setup mac addresses */
-}
-
-static void __init easy_setup_bga(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(easy_partitions);
-       adm5120_flash0_data.parts = easy_partitions;
-
-       adm5120_gpiodev_resource.start &= ~EASY_BGA_GPIO_DEV_MASK;
-
-       /* TODO: setup mac addresses */
-}
-
-unsigned char easy5120rt_vlans[6] = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(EASY5120PATA, "Infineon EASY 5120P-ATA Reference Board")
-       .board_setup    = easy_setup_pqfp,
-       .eth_num_ports  = 6,
-       .num_devices    = ARRAY_SIZE(easy5120pata_devices),
-       .devices        = easy5120pata_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY5120RT, "Infineon EASY 5120-RT Reference Board")
-       .board_setup    = easy_setup_bga,
-       .eth_num_ports  = 5,
-       .eth_vlans      = easy5120rt_vlans,
-       .num_devices    = ARRAY_SIZE(easy5120rt_devices),
-       .devices        = easy5120rt_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(easy5120rt_pci_irqs),
-       .pci_irq_map    = easy5120rt_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY5120WVOIP, "Infineon EASY 5120-WVoIP Reference Board")
-       .board_setup    = easy_setup_bga,
-       .eth_num_ports  = 6,
-       .num_devices    = ARRAY_SIZE(easy5120wvoip_devices),
-       .devices        = easy5120wvoip_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(EASY83000, "Infineon EASY 83000 Reference Board")
-       .board_setup    = easy_setup_pqfp,
-       .eth_num_ports  = 6,
-       .num_devices    = ARRAY_SIZE(easy83000_devices),
-       .devices        = easy83000_devices,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/mikrotik.c
deleted file mode 100644 (file)
index 9595e81..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik RouterBOARD 1xx series
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  NAND initialization code was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *    The original Mikrotik code seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_nand.h>
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_info.h>
-
-#include <prom/routerboot.h>
-
-#define RB1XX_NAND_CHIP_DELAY  25
-
-#define RB150_NAND_BASE                0x1FC80000
-#define RB150_NAND_SIZE                1
-
-#define RB150_GPIO_NAND_READY  ADM5120_GPIO_PIN0
-#define RB150_GPIO_NAND_NCE    ADM5120_GPIO_PIN1
-#define RB150_GPIO_NAND_CLE    ADM5120_GPIO_P2L2
-#define RB150_GPIO_NAND_ALE    ADM5120_GPIO_P3L2
-#define RB150_GPIO_DEV_MASK    ( 1 << RB150_GPIO_NAND_READY    \
-                               | 1 << RB150_GPIO_NAND_NCE      \
-                               | 1 << RB150_GPIO_NAND_CLE      \
-                               | 1 << RB150_GPIO_NAND_ALE)
-
-#define RB150_NAND_DELAY       100
-
-#define RB150_NAND_WRITE(v) \
-       writeb((v), (void __iomem *)KSEG1ADDR(RB150_NAND_BASE))
-
-#define RB153_GPIO_DEV_MASK    ( 1 << ADM5120_GPIO_PIN0 \
-                               | 1 << ADM5120_GPIO_PIN3 \
-                               | 1 << ADM5120_GPIO_PIN4 )
-
-/*--------------------------------------------------------------------------*/
-
-static struct adm5120_pci_irq rb1xx_pci_irqs[] __initdata = {
-       PCIIRQ(1, 0, 1, ADM5120_IRQ_PCI0),
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI1),
-       PCIIRQ(3, 0, 1, ADM5120_IRQ_PCI2)
-};
-
-static struct mtd_partition rb1xx_nor_parts[] = {
-       {
-               .name   = "booter",
-               .offset = 0,
-               .size   = 64*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "firmware",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct mtd_partition rb1xx_nand_parts[] = {
-       {
-               .name   = "kernel",
-               .offset = 0,
-               .size   = 4 * 1024 * 1024,
-       } , {
-               .name   = "rootfs",
-               .offset = MTDPART_OFS_NXTBLK,
-               .size   = MTDPART_SIZ_FULL
-       }
-};
-
-static struct platform_device *rb1xx_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_nand_device,
-       &adm5120_buttons_device,
-};
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load.  So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb1xx_nand_ecclayout = {
-       .eccbytes       = 6,
-       .eccpos         = { 8, 9, 10, 13, 14, 15 },
-       .oobavail       = 9,
-       .oobfree        = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-static struct resource rb150_nand_resource[] = {
-       [0] = {
-               .start  = RB150_NAND_BASE,
-               .end    = RB150_NAND_BASE + RB150_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-static struct resource rb153_cf_resources[] = {
-       {
-               .name   = "cf_membase",
-               .start  = ADM5120_EXTIO1_BASE,
-               .end    = ADM5120_EXTIO1_BASE + ADM5120_EXTIO1_SIZE-1 ,
-               .flags  = IORESOURCE_MEM
-       }, {
-               .name   = "cf_irq",
-               .start  = ADM5120_IRQ_GPIO4,
-               .end    = ADM5120_IRQ_GPIO4,
-               .flags  = IORESOURCE_IRQ
-       }
-};
-
-static struct platform_device rb153_cf_device = {
-       .name           = "pata-rb153-cf",
-       .id             = -1,
-       .resource       = rb153_cf_resources,
-       .num_resources  = ARRAY_SIZE(rb153_cf_resources),
-};
-
-static struct platform_device *rb153_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_nand_device,
-       &adm5120_buttons_device,
-       &rb153_cf_device,
-};
-
-#if 0
-/*
- * RB1xx boards have bad network performance with the default VLAN matrixes.
- * Disable it while the ethernet driver gets fixed.
- */
-static unsigned char rb11x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x44, 0x42, 0x41, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb133c_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x44, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-
-static unsigned char rb15x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x00
-};
-
-static unsigned char rb192_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x41, 0x50, 0x48, 0x44, 0x42, 0x00
-};
-#else
-static unsigned char rb_vlans[6] __initdata = {
-       0x7F, 0x00, 0x00, 0x00, 0x00, 0x00
-};
-#define rb11x_vlans    rb_vlans
-#define rb133_vlans    rb_vlans
-#define rb133c_vlans   rb_vlans
-#define rb15x_vlans    rb_vlans
-#define rb192_vlans    rb_vlans
-#endif
-
-/*--------------------------------------------------------------------------*/
-
-static int rb150_nand_ready(struct mtd_info *mtd)
-{
-       return gpio_get_value(RB150_GPIO_NAND_READY);
-}
-
-static void rb150_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-               unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               gpio_set_value(RB150_GPIO_NAND_CLE, (ctrl & NAND_CLE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_ALE, (ctrl & NAND_ALE) ? 1 : 0);
-               gpio_set_value(RB150_GPIO_NAND_NCE, (ctrl & NAND_NCE) ? 0 : 1);
-       }
-
-       udelay(RB150_NAND_DELAY);
-
-       if (cmd != NAND_CMD_NONE)
-               RB150_NAND_WRITE(cmd);
-}
-
-/*--------------------------------------------------------------------------*/
-
-static void __init rb1xx_mac_setup(void)
-{
-       int i, j;
-
-       if (!rb_hs.mac_base)
-               return;
-
-       for (i = 0; i < 6; i++) {
-               for (j = 0; j < 5; j++)
-                       adm5120_eth_macs[i][j] = rb_hs.mac_base[j];
-               adm5120_eth_macs[i][5] = rb_hs.mac_base[5]+i;
-       }
-}
-
-static int rb1xx_nand_fixup(struct mtd_info *mtd)
-{
-       struct nand_chip *chip = mtd->priv;
-
-       if (mtd->writesize == 512)
-               chip->ecc.layout = &rb1xx_nand_ecclayout;
-
-       return 0;
-}
-
-static void __init rb1xx_flash_setup(void)
-{
-       /* setup data for flash0 device */
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(rb1xx_nor_parts);
-       adm5120_flash0_data.parts = rb1xx_nor_parts;
-
-       /* setup data for NAND device */
-       adm5120_nand_data.chip.nr_chips = 1;
-       adm5120_nand_data.chip.nr_partitions = ARRAY_SIZE(rb1xx_nand_parts);
-       adm5120_nand_data.chip.partitions = rb1xx_nand_parts;
-       adm5120_nand_data.chip.chip_delay = RB1XX_NAND_CHIP_DELAY;
-       adm5120_nand_data.chip.options = NAND_NO_AUTOINCR;
-
-       adm5120_nand_data.chip.chip_fixup = &rb1xx_nand_fixup;
-}
-
-static void __init rb1xx_setup(void)
-{
-       /* enable NAND flash interface */
-       adm5120_nand_enable();
-
-       /* initialize NAND chip */
-       adm5120_nand_set_spn(1);
-       adm5120_nand_set_wpn(0);
-
-       adm5120_buttons_data.nbuttons = 1;
-       adm5120_buttons[0].desc = "reset button";
-       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN7;
-
-       rb1xx_flash_setup();
-       rb1xx_mac_setup();
-}
-
-static void __init rb150_setup(void)
-{
-       /* setup GPIO pins for NAND flash chip */
-       gpio_request(RB150_GPIO_NAND_READY, "nand-ready");
-       gpio_direction_input(RB150_GPIO_NAND_READY);
-       gpio_request(RB150_GPIO_NAND_NCE, "nand-nce");
-       gpio_direction_output(RB150_GPIO_NAND_NCE, 1);
-       gpio_request(RB150_GPIO_NAND_CLE, "nand-cle");
-       gpio_direction_output(RB150_GPIO_NAND_CLE, 0);
-       gpio_request(RB150_GPIO_NAND_ALE, "nand-ale");
-       gpio_direction_output(RB150_GPIO_NAND_ALE, 0);
-
-       adm5120_nand_device.num_resources = ARRAY_SIZE(rb150_nand_resource);
-       adm5120_nand_device.resource = rb150_nand_resource;
-       adm5120_nand_data.ctrl.cmd_ctrl = rb150_nand_cmd_ctrl;
-       adm5120_nand_data.ctrl.dev_ready = rb150_nand_ready;
-
-       adm5120_buttons_data.nbuttons = 1;
-       adm5120_buttons[0].desc = "reset button";
-       adm5120_buttons[0].gpio = ADM5120_GPIO_PIN1; /* FIXME: valid? */
-
-       adm5120_gpiodev_resource.start &= ~RB150_GPIO_DEV_MASK;
-
-       adm5120_flash0_data.window_size = 512*1024;
-
-       rb1xx_flash_setup();
-       rb1xx_mac_setup();
-}
-
-static void __init rb153_setup(void)
-{
-       /* enable CSX1:INTX1 on GPIO[3:4] for the CF slot */
-       adm5120_gpio_csx1_enable();
-       /* enable the wait state pin GPIO[0] for external I/O control */
-       adm5120_gpio_ew_enable();
-
-       rb1xx_setup();
-
-       adm5120_gpiodev_resource.start &= ~RB153_GPIO_DEV_MASK;
-}
-
-/*--------------------------------------------------------------------------*/
-
-ADM5120_BOARD_START(RB_111, "Mikrotik RouterBOARD 111")
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb11x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_112, "Mikrotik RouterBOARD 112")
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb11x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_133, "Mikrotik RouterBOARD 133")
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 3,
-       .eth_vlans      = rb133_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_133C, "Mikrotik RouterBOARD 133C")
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 1,
-       .eth_vlans      = rb133c_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_150, "Mikrotik RouterBOARD 150")
-       .board_setup    = rb150_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = rb15x_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_153, "Mikrotik RouterBOARD 153")
-       .board_setup    = rb153_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = rb15x_vlans,
-       .num_devices    = ARRAY_SIZE(rb153_devices),
-       .devices        = rb153_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(RB_192, "Mikrotik RouterBOARD 192")
-       .board_setup    = rb1xx_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = rb192_vlans,
-       .num_devices    = ARRAY_SIZE(rb1xx_devices),
-       .devices        = rb1xx_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(rb1xx_pci_irqs),
-       .pci_irq_map    = rb1xx_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c b/target/linux/adm5120/files/arch/mips/adm5120/boards/zyxel.c
deleted file mode 100644 (file)
index 717c073..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  $Id$
- *
- *  ZyXEL Prestige P-334/P-335 boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_board.h>
-#include <adm5120_platform.h>
-#include <adm5120_irq.h>
-
-#define P33X_GPIO_DEV_MASK     (1 << ADM5120_GPIO_PIN5)
-
-static void switch_bank_gpio5(unsigned bank)
-{
-       switch (bank) {
-       case 0:
-               gpio_set_value(ADM5120_GPIO_PIN5, 0);
-               break;
-       case 1:
-               gpio_set_value(ADM5120_GPIO_PIN5, 1);
-               break;
-       }
-}
-
-static struct adm5120_pci_irq p33x_pci_irqs[] __initdata = {
-       PCIIRQ(2, 0, 1, ADM5120_IRQ_PCI0),
-};
-
-static struct mtd_partition p33x_partitions[] = {
-       {
-               .name   = "bootbase",
-               .offset = 0,
-               .size   = 16*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "rom",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 16*1024,
-       } , {
-               .name   = "bootext",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = 96*1024,
-               .mask_flags = MTD_WRITEABLE,
-       } , {
-               .name   = "trx",
-               .offset = MTDPART_OFS_APPEND,
-               .size   = MTDPART_SIZ_FULL,
-       } , {
-               .name   = "firmware",
-               .offset = 32*1024,
-               .size   = MTDPART_SIZ_FULL,
-       }
-};
-
-static struct platform_device *p334_devices[] __initdata = {
-       &adm5120_flash0_device,
-};
-
-static struct platform_device *p335_devices[] __initdata = {
-       &adm5120_flash0_device,
-       &adm5120_hcd_device,
-};
-
-static void __init p33x_setup(void)
-{
-       gpio_request(ADM5120_GPIO_PIN5, NULL); /* for flash A20 line */
-       gpio_direction_output(ADM5120_GPIO_PIN5, 0);
-
-       /* setup data for flash0 device */
-       adm5120_flash0_data.switch_bank = switch_bank_gpio5;
-       adm5120_flash0_data.nr_parts = ARRAY_SIZE(p33x_partitions);
-       adm5120_flash0_data.parts = p33x_partitions;
-
-       adm5120_gpiodev_resource.start &= ~P33X_GPIO_DEV_MASK;
-       /* TODO: setup mac address */
-}
-
-unsigned char p33x_vlans[6] __initdata = {
-       /* FIXME: untested */
-       0x50, 0x48, 0x44, 0x42, 0x41, 0x00
-};
-
-ADM5120_BOARD_START(P334WT, "ZyXEL Prestige 334WT")
-       .board_setup    = p33x_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = p33x_vlans,
-       .num_devices    = ARRAY_SIZE(p334_devices),
-       .devices        = p334_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(p33x_pci_irqs),
-       .pci_irq_map    = p33x_pci_irqs,
-ADM5120_BOARD_END
-
-ADM5120_BOARD_START(P335, "ZyXEL Prestige 335/335WT")
-       .board_setup    = p33x_setup,
-       .eth_num_ports  = 5,
-       .eth_vlans      = p33x_vlans,
-       .num_devices    = ARRAY_SIZE(p335_devices),
-       .devices        = p335_devices,
-       .pci_nr_irqs    = ARRAY_SIZE(p33x_pci_irqs),
-       .pci_irq_map    = p33x_pci_irqs,
-ADM5120_BOARD_END
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/clock.c b/target/linux/adm5120/files/arch/mips/adm5120/clock.c
deleted file mode 100644 (file)
index bc5bf37..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 minimal CLK API implementation
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was based on the CLK API implementation in:
- *     arch/mips/tx4938/toshiba_rbtx4938/setup.c
- *     Copyright (C) 2000-2001 Toshiba Corporation
- *     2003-2005 (c) MontaVista Software, Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/module.h>
-#include <linux/err.h>
-#include <linux/clk.h>
-
-#include <adm5120_defs.h>
-
-struct clk {
-       unsigned long rate;
-};
-
-static struct clk uart_clk = {
-       .rate = ADM5120_UART_CLOCK
-};
-
-struct clk *clk_get(struct device *dev, const char *id)
-{
-       if (!strcmp(id, "UARTCLK"))
-               return &uart_clk;
-
-       return ERR_PTR(-ENOENT);
-}
-EXPORT_SYMBOL(clk_get);
-
-int clk_enable(struct clk *clk)
-{
-       return 0;
-}
-EXPORT_SYMBOL(clk_enable);
-
-void clk_disable(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_disable);
-
-unsigned long clk_get_rate(struct clk *clk)
-{
-       return clk->rate;
-}
-EXPORT_SYMBOL(clk_get_rate);
-
-void clk_put(struct clk *clk)
-{
-}
-EXPORT_SYMBOL(clk_put);
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/gpio.c b/target/linux/adm5120/files/arch/mips/adm5120/gpio.c
deleted file mode 100644 (file)
index 0cb446e..0000000
+++ /dev/null
@@ -1,375 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 GPIO support
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/module.h>
-#include <linux/delay.h>
-#include <linux/platform_device.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_switch.h>
-#include <adm5120_irq.h>
-
-#define GPIO_READ(r)           __raw_readl((r))
-#define GPIO_WRITE(v, r)       __raw_writel((v), (r))
-#define GPIO_REG(r)    (void __iomem *)(KSEG1ADDR(ADM5120_SWITCH_BASE)+r)
-
-struct adm5120_gpio_line {
-       u32 flags;
-       const char *label;
-       int irq;
-};
-
-#define GPIO_FLAG_VALID                0x01
-#define GPIO_FLAG_USED         0x02
-
-struct led_desc {
-       void __iomem *reg;      /* LED register address */
-       u8 iv_shift;            /* shift amount for input bit */
-       u8 mode_shift;          /* shift amount for mode bits */
-};
-
-#define LED_DESC(p, l) { \
-               .reg = GPIO_REG(SWITCH_REG_PORT0_LED+((p) * 4)), \
-               .iv_shift = LED0_IV_SHIFT + (l), \
-               .mode_shift = (l) * 4 \
-       }
-
-static struct led_desc led_table[15] = {
-       LED_DESC(0, 0), LED_DESC(0, 1), LED_DESC(0, 2),
-       LED_DESC(1, 0), LED_DESC(1, 1), LED_DESC(1, 2),
-       LED_DESC(2, 0), LED_DESC(2, 1), LED_DESC(2, 2),
-       LED_DESC(3, 0), LED_DESC(3, 1), LED_DESC(3, 2),
-       LED_DESC(4, 0), LED_DESC(4, 1), LED_DESC(4, 2)
-};
-
-static struct adm5120_gpio_line adm5120_gpio_map[ADM5120_GPIO_COUNT];
-
-static u32 gpio_conf2;
-
-/*-------------------------------------------------------------------------*/
-
-static inline int gpio_is_invalid(unsigned gpio)
-{
-       if ((gpio > ADM5120_GPIO_MAX) ||
-               (adm5120_gpio_map[gpio].flags & GPIO_FLAG_VALID) == 0)
-               return 1;
-
-       return 0;
-}
-
-static inline int gpio_is_used(unsigned gpio)
-{
-       return ((adm5120_gpio_map[gpio].flags & GPIO_FLAG_USED) != 0);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Helpers for GPIO lines in GPIO_CONF0 register
- */
-#define PIN_IM(p)      ((1 << GPIO_CONF0_IM_SHIFT) << p)
-#define PIN_IV(p)      ((1 << GPIO_CONF0_IV_SHIFT) << p)
-#define PIN_OE(p)      ((1 << GPIO_CONF0_OE_SHIFT) << p)
-#define PIN_OV(p)      ((1 << GPIO_CONF0_OV_SHIFT) << p)
-
-static inline int pins_direction_input(unsigned pin)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = GPIO_READ(reg);
-       t &= ~(PIN_OE(pin));
-       t |= PIN_IM(pin);
-       GPIO_WRITE(t, reg);
-
-       return 0;
-}
-
-static inline int pins_direction_output(unsigned pin, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = GPIO_READ(reg);
-       t &= ~(PIN_IM(pin) | PIN_OV(pin));
-       t |= PIN_OE(pin);
-
-       if (value)
-               t |= PIN_OV(pin);
-
-       GPIO_WRITE(t, reg);
-
-       return 0;
-}
-
-static inline int pins_get_value(unsigned pin)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = GPIO_READ(reg);
-       if ((t & PIN_IM(pin)) != 0)
-               t &= PIN_IV(pin);
-       else
-               t &= PIN_OV(pin);
-
-       return (t) ? 1 : 0;
-}
-
-static inline void pins_set_value(unsigned pin, int value)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = GPIO_REG(SWITCH_REG_GPIO_CONF0);
-
-       t = GPIO_READ(reg);
-       if (value == 0)
-               t &= ~(PIN_OV(pin));
-       else
-               t |= PIN_OV(pin);
-
-       GPIO_WRITE(t, reg);
-}
-
-/*
- * Helpers for GPIO lines in PORTx_LED registers
- */
-static inline int leds_direction_input(unsigned led)
-{
-       void __iomem **reg;
-       u32 t;
-
-       reg = led_table[led].reg;
-       t = GPIO_READ(reg);
-       t &= ~(LED_MODE_MASK << led_table[led].mode_shift);
-       GPIO_WRITE(t, reg);
-
-       return 0;
-}
-
-static inline int leds_direction_output(unsigned led, int value)
-{
-       void __iomem **reg;
-       u32 t, s;
-
-       reg = led_table[led].reg;
-       s = led_table[led].mode_shift;
-
-       t = GPIO_READ(reg);
-       t &= ~(LED_MODE_MASK << s);
-
-       switch (value) {
-       case ADM5120_GPIO_LOW:
-               t |= (LED_MODE_OUT_LOW << s);
-               break;
-       case ADM5120_GPIO_FLASH:
-       case ADM5120_GPIO_LINK:
-       case ADM5120_GPIO_SPEED:
-       case ADM5120_GPIO_DUPLEX:
-       case ADM5120_GPIO_ACT:
-       case ADM5120_GPIO_COLL:
-       case ADM5120_GPIO_LINK_ACT:
-       case ADM5120_GPIO_DUPLEX_COLL:
-       case ADM5120_GPIO_10M_ACT:
-       case ADM5120_GPIO_100M_ACT:
-               t |= ((value & LED_MODE_MASK) << s);
-               break;
-       default:
-               t |= (LED_MODE_OUT_HIGH << s);
-               break;
-       }
-
-       GPIO_WRITE(t, reg);
-
-       return 0;
-}
-
-static inline int leds_get_value(unsigned led)
-{
-       void __iomem **reg;
-       u32 t, m;
-
-       reg = led_table[led].reg;
-
-       t = GPIO_READ(reg);
-       m = (t >> led_table[led].mode_shift) & LED_MODE_MASK;
-       if (m == LED_MODE_INPUT)
-               return (t >> led_table[led].iv_shift) & 1;
-
-       if (m == LED_MODE_OUT_LOW)
-               return 0;
-
-       return 1;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Main GPIO support routines
- */
-int adm5120_gpio_direction_input(unsigned gpio)
-{
-       if (gpio_is_invalid(gpio))
-               return -EINVAL;
-
-       if (gpio < ADM5120_GPIO_P0L0)
-               return pins_direction_input(gpio);
-
-       gpio -= ADM5120_GPIO_P0L0;
-       return leds_direction_input(gpio);
-}
-EXPORT_SYMBOL(adm5120_gpio_direction_input);
-
-int adm5120_gpio_direction_output(unsigned gpio, int value)
-{
-       if (gpio_is_invalid(gpio))
-               return -EINVAL;
-
-       if (gpio < ADM5120_GPIO_P0L0)
-               return pins_direction_output(gpio, value);
-
-       gpio -= ADM5120_GPIO_P0L0;
-       return leds_direction_output(gpio, value);
-}
-EXPORT_SYMBOL(adm5120_gpio_direction_output);
-
-int adm5120_gpio_get_value(unsigned gpio)
-{
-       if (gpio < ADM5120_GPIO_P0L0)
-               return pins_get_value(gpio);
-
-       gpio -= ADM5120_GPIO_P0L0;
-       return leds_get_value(gpio);
-}
-EXPORT_SYMBOL(adm5120_gpio_get_value);
-
-void adm5120_gpio_set_value(unsigned gpio, int value)
-{
-       if (gpio < ADM5120_GPIO_P0L0) {
-               pins_set_value(gpio, value);
-               return;
-       }
-
-       gpio -= ADM5120_GPIO_P0L0;
-       leds_direction_output(gpio, value);
-}
-EXPORT_SYMBOL(adm5120_gpio_set_value);
-
-int adm5120_gpio_request(unsigned gpio, const char *label)
-{
-       if (gpio_is_invalid(gpio))
-               return -EINVAL;
-
-       if (gpio_is_used(gpio))
-               return -EBUSY;
-
-       adm5120_gpio_map[gpio].flags |= GPIO_FLAG_USED;
-       adm5120_gpio_map[gpio].label = label;
-
-       return 0;
-}
-EXPORT_SYMBOL(adm5120_gpio_request);
-
-void adm5120_gpio_free(unsigned gpio)
-{
-       if (gpio_is_invalid(gpio))
-               return;
-
-       adm5120_gpio_map[gpio].flags &= ~GPIO_FLAG_USED;
-       adm5120_gpio_map[gpio].label = NULL;
-}
-EXPORT_SYMBOL(adm5120_gpio_free);
-
-int adm5120_gpio_to_irq(unsigned gpio)
-{
-       if (gpio > ADM5120_GPIO_MAX)
-               return -EINVAL;
-
-       return adm5120_gpio_map[gpio].irq;
-}
-EXPORT_SYMBOL(adm5120_gpio_to_irq);
-
-int adm5120_irq_to_gpio(unsigned irq)
-{
-       int i;
-
-       for (i = 0; i < ADM5120_GPIO_COUNT; i++)
-               if (adm5120_gpio_map[i].irq == irq)
-                       return i;
-
-       return -EINVAL;
-}
-EXPORT_SYMBOL(adm5120_irq_to_gpio);
-
-/*-------------------------------------------------------------------------*/
-
-void __init adm5120_gpio_csx0_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX0;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       adm5120_gpio_map[ADM5120_GPIO_PIN1].flags &= ~GPIO_FLAG_VALID;
-       adm5120_gpio_map[ADM5120_GPIO_PIN2].irq = ADM5120_IRQ_GPIO2;
-}
-
-void __init adm5120_gpio_csx1_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_CSX1;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       adm5120_gpio_map[ADM5120_GPIO_PIN3].flags &= ~GPIO_FLAG_VALID;
-       if (adm5120_package_bga())
-               adm5120_gpio_map[ADM5120_GPIO_PIN4].irq = ADM5120_IRQ_GPIO4;
-}
-
-void __init adm5120_gpio_ew_enable(void)
-{
-       gpio_conf2 |= GPIO_CONF2_EW;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       adm5120_gpio_map[ADM5120_GPIO_PIN0].flags &= ~GPIO_FLAG_VALID;
-}
-
-void __init adm5120_gpio_init(void)
-{
-       int i;
-
-       gpio_conf2 = 0;
-       SW_WRITE_REG(SWITCH_REG_GPIO_CONF2, gpio_conf2);
-
-       for (i = 0; i < ADM5120_GPIO_COUNT; i++)
-               adm5120_gpio_map[i].flags = GPIO_FLAG_VALID;
-
-       if (adm5120_package_pqfp()) {
-               adm5120_gpio_map[ADM5120_GPIO_PIN4].flags &= ~GPIO_FLAG_VALID;
-               adm5120_gpio_map[ADM5120_GPIO_PIN5].flags &= ~GPIO_FLAG_VALID;
-               adm5120_gpio_map[ADM5120_GPIO_PIN6].flags &= ~GPIO_FLAG_VALID;
-               adm5120_gpio_map[ADM5120_GPIO_PIN7].flags &= ~GPIO_FLAG_VALID;
-       }
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/irq.c b/target/linux/adm5120/files/arch/mips/adm5120/irq.c
deleted file mode 100644 (file)
index ed9acb0..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- *  ADM5120 specific interrupt handlers
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/version.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/io.h>
-
-#include <asm/irq.h>
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/bitops.h>
-
-#include <asm/mach-adm5120/adm5120_defs.h>
-#include <asm/mach-adm5120/adm5120_irq.h>
-
-static void adm5120_intc_irq_unmask(unsigned int irq);
-static void adm5120_intc_irq_mask(unsigned int irq);
-static int  adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type);
-
-static inline void intc_write_reg(unsigned int reg, u32 val)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       __raw_writel(val, base + reg);
-}
-
-static inline u32 intc_read_reg(unsigned int reg)
-{
-       void __iomem *base = (void __iomem *)KSEG1ADDR(ADM5120_INTC_BASE);
-
-       return __raw_readl(base + reg);
-}
-
-static struct irq_chip adm5120_intc_irq_chip = {
-       .name           = "INTC",
-       .unmask         = adm5120_intc_irq_unmask,
-       .mask           = adm5120_intc_irq_mask,
-       .mask_ack       = adm5120_intc_irq_mask,
-       .set_type       = adm5120_intc_irq_set_type
-};
-
-static struct irqaction adm5120_intc_irq_action = {
-       .handler        = no_action,
-       .name           = "cascade [INTC]"
-};
-
-static void adm5120_intc_irq_unmask(unsigned int irq)
-{
-       irq -= ADM5120_INTC_IRQ_BASE;
-       intc_write_reg(INTC_REG_IRQ_ENABLE, 1 << irq);
-}
-
-static void adm5120_intc_irq_mask(unsigned int irq)
-{
-       irq -= ADM5120_INTC_IRQ_BASE;
-       intc_write_reg(INTC_REG_IRQ_DISABLE, 1 << irq);
-}
-
-static int adm5120_intc_irq_set_type(unsigned int irq, unsigned int flow_type)
-{
-       unsigned int sense;
-       unsigned long mode;
-       int err = 0;
-
-       sense = flow_type & (IRQ_TYPE_SENSE_MASK);
-       switch (sense) {
-       case IRQ_TYPE_NONE:
-       case IRQ_TYPE_LEVEL_HIGH:
-               break;
-       case IRQ_TYPE_LEVEL_LOW:
-               switch (irq) {
-               case ADM5120_IRQ_GPIO2:
-               case ADM5120_IRQ_GPIO4:
-                       break;
-               default:
-                       err = -EINVAL;
-                       break;
-               }
-               break;
-       default:
-               err = -EINVAL;
-               break;
-       }
-
-       if (err)
-               return err;
-
-       switch (irq) {
-       case ADM5120_IRQ_GPIO2:
-       case ADM5120_IRQ_GPIO4:
-               mode = intc_read_reg(INTC_REG_INT_MODE);
-               if (sense == IRQ_TYPE_LEVEL_LOW)
-                       mode |= (1 << (irq - ADM5120_INTC_IRQ_BASE));
-               else
-                       mode &= ~(1 << (irq - ADM5120_INTC_IRQ_BASE));
-
-               intc_write_reg(INTC_REG_INT_MODE, mode);
-               /* fallthrough */
-       default:
-               irq_desc[irq].status &= ~IRQ_TYPE_SENSE_MASK;
-               irq_desc[irq].status |= sense;
-               break;
-       }
-
-       return 0;
-}
-
-static void adm5120_intc_irq_dispatch(void)
-{
-       unsigned long status;
-       int irq;
-
-       /* dispatch only one IRQ at a time */
-       status = intc_read_reg(INTC_REG_IRQ_STATUS) & INTC_INT_ALL;
-
-       if (status) {
-               irq = ADM5120_INTC_IRQ_BASE + fls(status) - 1;
-               do_IRQ(irq);
-       } else
-               spurious_interrupt();
-}
-
-asmlinkage void plat_irq_dispatch(void)
-{
-       unsigned long pending;
-
-       pending = read_c0_status() & read_c0_cause() & ST0_IM;
-
-       if (pending & STATUSF_IP7)
-               do_IRQ(ADM5120_IRQ_COUNTER);
-       else if (pending & STATUSF_IP2)
-               adm5120_intc_irq_dispatch();
-       else
-               spurious_interrupt();
-}
-
-#define INTC_IRQ_STATUS (IRQ_LEVEL | IRQ_TYPE_LEVEL_HIGH | IRQ_DISABLED)
-
-static void __init adm5120_intc_irq_init(void)
-{
-       int i;
-
-       /* disable all interrupts */
-       intc_write_reg(INTC_REG_IRQ_DISABLE, INTC_INT_ALL);
-
-       /* setup all interrupts to generate IRQ instead of FIQ */
-       intc_write_reg(INTC_REG_INT_MODE, 0);
-
-       /* set active level for all external interrupts to HIGH */
-       intc_write_reg(INTC_REG_INT_LEVEL, 0);
-
-       /* disable usage of the TEST_SOURCE register */
-       intc_write_reg(INTC_REG_IRQ_SOURCE_SELECT, 0);
-
-       for (i = ADM5120_INTC_IRQ_BASE;
-               i <= ADM5120_INTC_IRQ_BASE + INTC_IRQ_LAST;
-               i++) {
-               irq_desc[i].status = INTC_IRQ_STATUS;
-               set_irq_chip_and_handler(i, &adm5120_intc_irq_chip,
-                       handle_level_irq);
-       }
-
-       setup_irq(ADM5120_IRQ_INTC, &adm5120_intc_irq_action);
-}
-
-void __init arch_init_irq(void) {
-       mips_cpu_irq_init();
-       adm5120_intc_irq_init();
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/memory.c b/target/linux/adm5120/files/arch/mips/adm5120/memory.c
deleted file mode 100644 (file)
index 50c87dd..0000000
+++ /dev/null
@@ -1,152 +0,0 @@
-/*
- *  $Id$
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_mpmc.h>
-
-#ifdef DEBUG
-#  define mem_dbg(f, a...)     printk(KERN_INFO "mem_detect: " f, ## a)
-#else
-#  define mem_dbg(f, a...)
-#endif
-
-unsigned long adm5120_memsize;
-
-#define MEM_READL(a)           __raw_readl((void __iomem *)(a))
-#define MEM_WRITEL(a, v)       __raw_writel((v), (void __iomem *)(a))
-
-static int __init mem_check_pattern(u8 *addr, unsigned long offs)
-{
-       u32 *p1 = (u32 *)addr;
-       u32 *p2 = (u32 *)(addr+offs);
-       u32 t, u, v;
-
-       /* save original value */
-       t = MEM_READL(p1);
-
-       u = MEM_READL(p2);
-       if (t != u)
-               return 0;
-
-       v = 0x55555555;
-       if (u == v)
-               v = 0xAAAAAAAA;
-
-       mem_dbg("write 0x%08X to 0x%08lX\n", v, (unsigned long)p1);
-
-       MEM_WRITEL(p1, v);
-       adm5120_ndelay(1000);
-       u = MEM_READL(p2);
-
-       mem_dbg("pattern at 0x%08lX is 0x%08X\n", (unsigned long)p2, u);
-
-       /* restore original value */
-       MEM_WRITEL(p1, t);
-
-       return (v == u);
-}
-
-static void __init adm5120_detect_memsize(void)
-{
-       u32     memctrl;
-       u32     size, maxsize;
-       u8      *p;
-
-       memctrl = SW_READ_REG(SWITCH_REG_MEMCTRL);
-       switch (memctrl & MEMCTRL_SDRS_MASK) {
-       case MEMCTRL_SDRS_4M:
-               maxsize = 4 << 20;
-               break;
-       case MEMCTRL_SDRS_8M:
-               maxsize = 8 << 20;
-               break;
-       case MEMCTRL_SDRS_16M:
-               maxsize = 16 << 20;
-               break;
-       default:
-               maxsize = 64 << 20;
-               break;
-       }
-
-       mem_dbg("checking for %uMB chip in 1st bank\n", maxsize >> 20);
-
-       /* detect size of the 1st SDRAM bank */
-       p = (u8 *)KSEG1ADDR(0);
-       for (size = 2<<20; size <= (maxsize >> 1); size <<= 1) {
-               if (mem_check_pattern(p, size)) {
-                       /* mirrored address */
-                       mem_dbg("mirrored data found at offset 0x%08X\n", size);
-                       break;
-               }
-       }
-
-       mem_dbg("chip size in 1st bank is %uMB\n", size >> 20);
-       adm5120_memsize = size;
-
-       if (size != maxsize)
-               /* 2nd bank is not supported */
-               goto out;
-
-       if ((memctrl & MEMCTRL_SDR1_ENABLE) == 0)
-               /* 2nd bank is disabled */
-               goto out;
-
-       /*
-        * some bootloaders enable 2nd bank, even if the 2nd SDRAM chip
-        * are missing.
-        */
-       mem_dbg("check presence of 2nd bank\n");
-
-       p = (u8 *)KSEG1ADDR(maxsize+size-4);
-       if (mem_check_pattern(p, 0))
-               adm5120_memsize += size;
-
-       if (maxsize != size) {
-               /* adjusting MECTRL register */
-               memctrl &= ~(MEMCTRL_SDRS_MASK);
-               switch (size>>20) {
-               case 4:
-                       memctrl |= MEMCTRL_SDRS_4M;
-                       break;
-               case 8:
-                       memctrl |= MEMCTRL_SDRS_8M;
-                       break;
-               case 16:
-                       memctrl |= MEMCTRL_SDRS_16M;
-                       break;
-               default:
-                       memctrl |= MEMCTRL_SDRS_64M;
-                       break;
-               }
-               SW_WRITE_REG(SWITCH_REG_MEMCTRL, memctrl);
-       }
-
-out:
-       mem_dbg("%dx%uMB memory found\n", (adm5120_memsize == size) ? 1 : 2 ,
-               size>>20);
-}
-
-void __init adm5120_mem_init(void)
-{
-       adm5120_detect_memsize();
-       add_memory_region(0, adm5120_memsize, BOOT_MEM_RAM);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/platform.c b/target/linux/adm5120/files/arch/mips/adm5120/platform.c
deleted file mode 100644 (file)
index 26de8f0..0000000
+++ /dev/null
@@ -1,252 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic ADM5120 platform devices
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/list.h>
-#include <linux/device.h>
-#include <linux/dma-mapping.h>
-#include <linux/platform_device.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-#include <adm5120_nand.h>
-#include <adm5120_platform.h>
-
-#if 1
-/*
- * TODO:remove global adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-unsigned int adm5120_eth_num_ports = 6;
-EXPORT_SYMBOL_GPL(adm5120_eth_num_ports);
-
-unsigned char adm5120_eth_macs[6][6] = {
-       {'\00', 'A', 'D', 'M', '\x51', '\x20' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x21' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x22' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x23' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x24' },
-       {'\00', 'A', 'D', 'M', '\x51', '\x25' }
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_macs);
-
-unsigned char adm5120_eth_vlans[6] = {
-       0x41, 0x42, 0x44, 0x48, 0x50, 0x60
-};
-EXPORT_SYMBOL_GPL(adm5120_eth_vlans);
-#endif
-
-/* Built-in ethernet switch */
-struct resource adm5120_switch_resources[] = {
-       [0] = {
-               .start  = ADM5120_SWITCH_BASE,
-               .end    = ADM5120_SWITCH_BASE+ADM5120_SWITCH_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_SWITCH,
-               .end    = ADM5120_IRQ_SWITCH,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-struct adm5120_switch_platform_data adm5120_switch_data;
-struct platform_device adm5120_switch_device = {
-       .name   = "adm5120-switch",
-       .id     = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_switch_resources),
-       .resource       = adm5120_switch_resources,
-       .dev.platform_data = &adm5120_switch_data,
-};
-
-/* USB Host Controller */
-struct resource adm5120_hcd_resources[] = {
-       [0] = {
-               .start  = ADM5120_USBC_BASE,
-               .end    = ADM5120_USBC_BASE+ADM5120_USBC_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-       [1] = {
-               .start  = ADM5120_IRQ_USBC,
-               .end    = ADM5120_IRQ_USBC,
-               .flags  = IORESOURCE_IRQ,
-       },
-};
-
-static u64 adm5120_hcd_dma_mask = DMA_BIT_MASK(24);
-struct platform_device adm5120_hcd_device = {
-       .name           = "adm5120-hcd",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_hcd_resources),
-       .resource       = adm5120_hcd_resources,
-       .dev = {
-               .dma_mask       = &adm5120_hcd_dma_mask,
-               .coherent_dma_mask = DMA_BIT_MASK(24),
-       }
-};
-
-/* NOR flash 0 */
-struct adm5120_flash_platform_data adm5120_flash0_data;
-struct platform_device adm5120_flash0_device = {
-       .name   = "adm5120-flash",
-       .id     = 0,
-       .dev.platform_data = &adm5120_flash0_data,
-};
-
-/* NOR flash 1 */
-struct adm5120_flash_platform_data adm5120_flash1_data;
-struct platform_device adm5120_flash1_device = {
-       .name   = "adm5120-flash",
-       .id     = 1,
-       .dev.platform_data = &adm5120_flash1_data,
-};
-
-/* NAND flash */
-struct resource adm5120_nand_resource[] = {
-       [0] = {
-               .start  = ADM5120_NAND_BASE,
-               .end    = ADM5120_NAND_BASE + ADM5120_NAND_SIZE-1,
-               .flags  = IORESOURCE_MEM,
-       },
-};
-
-struct platform_nand_data adm5120_nand_data = {
-       .ctrl.dev_ready = adm5120_nand_ready,
-       .ctrl.cmd_ctrl  = adm5120_nand_cmd_ctrl,
-};
-
-struct platform_device adm5120_nand_device = {
-       .name           = "gen_nand",
-       .id             = -1,
-       .num_resources  = ARRAY_SIZE(adm5120_nand_resource),
-       .resource       = adm5120_nand_resource,
-       .dev.platform_data = &adm5120_nand_data,
-};
-
-/* built-in UARTs */
-struct amba_pl010_data adm5120_uart0_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart0_device = {
-       .dev            = {
-               .bus_id = "APB:UART0",
-               .platform_data = &adm5120_uart0_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART0_BASE,
-               .end    = ADM5120_UART0_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART0, -1 },
-       .periphid       = 0x0041010,
-};
-
-struct amba_pl010_data adm5120_uart1_data = {
-       .set_mctrl = adm5120_uart_set_mctrl
-};
-
-struct amba_device adm5120_uart1_device = {
-       .dev            = {
-               .bus_id = "APB:UART1",
-               .platform_data = &adm5120_uart1_data,
-       },
-       .res            = {
-               .start  = ADM5120_UART1_BASE,
-               .end    = ADM5120_UART1_BASE + ADM5120_UART_SIZE - 1,
-               .flags  = IORESOURCE_MEM,
-       },
-       .irq            = { ADM5120_IRQ_UART1, -1 },
-       .periphid       = 0x0041010,
-};
-
-#define ADM5120_BUTTON_THRESHOLD       5
-#define ADM5120_BUTTON_INTERVAL                20
-
-struct gpio_button adm5120_buttons[ADM5120_NUM_BUTTONS] = {
-       {
-               .type           = EV_KEY,
-               .code           = BTN_0,
-               .threshold      = ADM5120_BUTTON_THRESHOLD,
-       }, {
-               .type           = EV_KEY,
-               .code           = BTN_1,
-               .threshold      = ADM5120_BUTTON_THRESHOLD,
-       }, {
-               .type           = EV_KEY,
-               .code           = BTN_2,
-               .threshold      = ADM5120_BUTTON_THRESHOLD,
-       }, {
-               .type           = EV_KEY,
-               .code           = BTN_3,
-               .threshold      = ADM5120_BUTTON_THRESHOLD,
-       }, {
-               .type           = EV_KEY,
-               .code           = BTN_4,
-               .threshold      = ADM5120_BUTTON_THRESHOLD,
-       }
-};
-
-struct gpio_buttons_platform_data adm5120_buttons_data = {
-       .poll_interval  = ADM5120_BUTTON_INTERVAL,
-       .nbuttons       = ARRAY_SIZE(adm5120_buttons),
-       .buttons        = adm5120_buttons,
-};
-
-struct platform_device adm5120_buttons_device = {
-       .name           = "gpio-buttons",
-       .id             = 0,
-       .dev.platform_data = &adm5120_buttons_data,
-};
-
-/* GPIO char device */
-struct resource adm5120_gpiodev_resource = {
-       .start  = 0x3fffff,
-};
-
-struct platform_device adm5120_gpiodev_device =        {
-       .name           = "GPIODEV",
-       .id             = -1,
-       .num_resources  = 1,
-       .resource       = &adm5120_gpiodev_resource,
-};
-
-void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
-               unsigned int mctrl)
-{
-}
-
-int adm5120_nand_ready(struct mtd_info *mtd)
-{
-       return ((adm5120_nand_get_status() & ADM5120_NAND_STATUS_READY) != 0);
-}
-
-void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
-       if (ctrl & NAND_CTRL_CHANGE) {
-               adm5120_nand_set_cle(ctrl & NAND_CLE);
-               adm5120_nand_set_ale(ctrl & NAND_ALE);
-               adm5120_nand_set_cen(ctrl & NAND_NCE);
-       }
-
-       if (cmd != NAND_CMD_NONE)
-               NAND_WRITE_REG(NAND_REG_DATA, cmd);
-}
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom.c b/target/linux/adm5120/files/arch/mips/adm5120/prom.c
deleted file mode 100644 (file)
index 7d61490..0000000
+++ /dev/null
@@ -1,276 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific prom routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/string.h>
-#include <linux/mm.h>
-#include <linux/io.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_uart.h>
-
-#include <prom/cfe.h>
-#include <prom/generic.h>
-#include <prom/routerboot.h>
-#include <prom/myloader.h>
-#include <prom/zynos.h>
-
-unsigned int adm5120_prom_type = ADM5120_PROM_GENERIC;
-
-struct board_desc {
-       unsigned long   mach_type;
-       char            *name;
-};
-
-#define DEFBOARD(n, mt) { .mach_type = (mt), .name = (n)}
-static struct board_desc common_boards[] __initdata = {
-       /* Cellvision/SparkLAN boards */
-       DEFBOARD("CAS-630",     MACH_ADM5120_CAS630),
-       DEFBOARD("CAS-670",     MACH_ADM5120_CAS670),
-       DEFBOARD("CAS-700",     MACH_ADM5120_CAS700),
-       DEFBOARD("CAS-771",     MACH_ADM5120_CAS771),
-       DEFBOARD("CAS-790",     MACH_ADM5120_CAS790),
-       DEFBOARD("CAS-861",     MACH_ADM5120_CAS861),
-       DEFBOARD("NFS-101U",    MACH_ADM5120_NFS101U),
-       /* Compex boards */
-       DEFBOARD("WP54G-WRT",   MACH_ADM5120_WP54G_WRT),
-       /* Edimax boards */
-       DEFBOARD("BR-6104K",    MACH_ADM5120_BR6104K),
-       DEFBOARD("BR-6104KP",   MACH_ADM5120_BR6104K),
-       DEFBOARD("BR-6104WG",   MACH_ADM5120_BR61x4WG),
-       DEFBOARD("BR-6114WG",   MACH_ADM5120_BR61x4WG),
-       /* Infineon boards */
-       DEFBOARD("EASY 5120P-ATA",      MACH_ADM5120_EASY5120PATA),
-       DEFBOARD("EASY 5120-RT",        MACH_ADM5120_EASY5120RT),
-       DEFBOARD("EASY 5120-WVoIP",     MACH_ADM5120_EASY5120WVOIP),
-       DEFBOARD("EASY 83000",          MACH_ADM5120_EASY83000),
-       /* Mikrotik RouterBOARDs */
-       DEFBOARD("111",         MACH_ADM5120_RB_111),
-       DEFBOARD("112",         MACH_ADM5120_RB_112),
-       DEFBOARD("133",         MACH_ADM5120_RB_133),
-       DEFBOARD("133C",        MACH_ADM5120_RB_133C),
-       DEFBOARD("133C3",       MACH_ADM5120_RB_133C),
-       DEFBOARD("150",         MACH_ADM5120_RB_153), /* it's intentional */
-       DEFBOARD("153",         MACH_ADM5120_RB_153),
-       DEFBOARD("192",         MACH_ADM5120_RB_192),
-       DEFBOARD("miniROUTER",  MACH_ADM5120_RB_150),
-};
-
-static unsigned long __init find_machtype_byname(char *name)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       if (name == NULL)
-               goto out;
-
-       if (*name == '\0')
-               goto out;
-
-       for (i = 0; i < ARRAY_SIZE(common_boards); i++) {
-               if (strcmp(common_boards[i].name, name) == 0) {
-                       ret = common_boards[i].mach_type;
-                       break;
-               }
-       }
-
-out:
-       return ret;
-}
-
-static unsigned long __init detect_machtype_routerboot(void)
-{
-       char *name;
-
-       name = routerboot_get_boardname();
-       return find_machtype_byname(name);
-}
-
-static unsigned long __init detect_machtype_generic(void)
-{
-       char *name;
-
-       name = generic_prom_getenv("board_name");
-       return find_machtype_byname(name);
-}
-
-unsigned long __init detect_machtype_cfe(void)
-{
-       char *name;
-
-       name = cfe_getenv("BOARD_NAME");
-       return find_machtype_byname(name);
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16             vendor_id;
-       u16             board_id;
-} zynos_boards[] __initdata = {
-#define ZYNOS_BOARD(vi, bi, mt) \
-       {.vendor_id = (vi), .board_id = (bi), .mach_type = (mt)}
-
-#define ZYXEL_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_ZYXEL, bi, mt)
-#define DLINK_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_DLINK, bi, mt)
-#define LUCENT_BOARD(bi, mt) ZYNOS_BOARD(ZYNOS_VENDOR_ID_LUCENT, bi, mt)
-       ZYXEL_BOARD(ZYNOS_BOARD_HS100,  MACH_ADM5120_HS100),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334,   MACH_ADM5120_P334),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334U,  MACH_ADM5120_P334U),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334W,  MACH_ADM5120_P334W),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WH, MACH_ADM5120_P334WH),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WHD, MACH_ADM5120_P334WHD),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT, MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P334WT_ALT,     MACH_ADM5120_P334WT),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335,   MACH_ADM5120_P335),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335PLUS, MACH_ADM5120_P335PLUS),
-       ZYXEL_BOARD(ZYNOS_BOARD_P335U,  MACH_ADM5120_P335U)
-};
-
-static unsigned long __init detect_machtype_bootbase(void)
-{
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(zynos_boards); i++) {
-               if (zynos_boards[i].vendor_id == bootbase_info.vendor_id &&
-                       zynos_boards[i].board_id == bootbase_info.board_id) {
-                       return zynos_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       printk(KERN_WARNING "Unknown ZyXEL model (%u)\n",
-                               bootbase_info.board_id);
-       return MACH_ADM5120_GENERIC;
-}
-
-static struct {
-       unsigned long   mach_type;
-       u16     vid;
-       u16     did;
-       u16     svid;
-       u16     sdid;
-} mylo_boards[]  __initdata = {
-#define MYLO_BOARD(v, d, sv, sd, mt) \
-       {.vid = (v), .did = (d), .svid = (sv), .sdid = (sd), .mach_type = (mt)}
-#define COMPEX_BOARD(d, mt) \
-       MYLO_BOARD(VENID_COMPEX, (d), VENID_COMPEX, (d), (mt))
-
-       COMPEX_BOARD(DEVID_COMPEX_NP27G, MACH_ADM5120_NP27G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28G, MACH_ADM5120_NP28G),
-       COMPEX_BOARD(DEVID_COMPEX_NP28GHS, MACH_ADM5120_NP28GHS),
-       COMPEX_BOARD(DEVID_COMPEX_WP54G, MACH_ADM5120_WP54G),
-       COMPEX_BOARD(DEVID_COMPEX_WP54Gv1C, MACH_ADM5120_WP54Gv1C),
-       COMPEX_BOARD(DEVID_COMPEX_WP54AG, MACH_ADM5120_WP54AG),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54G, MACH_ADM5120_WPP54G),
-       COMPEX_BOARD(DEVID_COMPEX_WPP54AG, MACH_ADM5120_WPP54AG),
-};
-
-static unsigned long __init detect_machtype_myloader(void)
-{
-       unsigned long ret;
-       int i;
-
-       ret = MACH_ADM5120_GENERIC;
-       for (i = 0; i < ARRAY_SIZE(mylo_boards); i++) {
-               if (mylo_boards[i].vid == myloader_info.vid &&
-                       mylo_boards[i].did == myloader_info.did &&
-                       mylo_boards[i].svid == myloader_info.svid &&
-                       mylo_boards[i].sdid == myloader_info.sdid) {
-                       ret = mylo_boards[i].mach_type;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-static void __init prom_detect_machtype(void)
-{
-       if (bootbase_present()) {
-               adm5120_prom_type = ADM5120_PROM_BOOTBASE;
-               mips_machtype = detect_machtype_bootbase();
-               return;
-       }
-
-       if (cfe_present()) {
-               adm5120_prom_type = ADM5120_PROM_CFE;
-               mips_machtype = detect_machtype_cfe();
-               return;
-       }
-
-       if (myloader_present()) {
-               adm5120_prom_type = ADM5120_PROM_MYLOADER;
-               mips_machtype = detect_machtype_myloader();
-               return;
-       }
-
-       if (routerboot_present()) {
-               adm5120_prom_type = ADM5120_PROM_ROUTERBOOT;
-               mips_machtype = detect_machtype_routerboot();
-               return;
-       }
-
-       if (generic_prom_present()) {
-               adm5120_prom_type = ADM5120_PROM_GENERIC;
-               mips_machtype = detect_machtype_generic();
-               return;
-       }
-
-       mips_machtype = MACH_ADM5120_GENERIC;
-}
-
-/* TODO: this is an ugly hack for RouterBOARDS */
-extern char _image_cmdline;
-static void __init prom_init_cmdline(void)
-{
-       char *cmd;
-
-       /* init command line, register a default kernel command line */
-       cmd = &_image_cmdline + 8;
-       if (strlen(cmd) > 0)
-               strcpy(arcs_cmdline, cmd);
-       else
-               strcpy(arcs_cmdline, CONFIG_CMDLINE);
-
-}
-
-#define UART_READ(r) \
-       __raw_readl((void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-#define UART_WRITE(r, v) \
-       __raw_writel((v), (void __iomem *)(KSEG1ADDR(ADM5120_UART0_BASE)+(r)))
-
-void __init prom_putchar(char ch)
-{
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-       UART_WRITE(UART_REG_DATA, ch);
-       while ((UART_READ(UART_REG_FLAG) & UART_FLAG_TXFE) == 0);
-}
-
-void __init prom_init(void)
-{
-       prom_detect_machtype();
-
-       prom_init_cmdline();
-}
-
-void __init prom_free_prom_memory(void)
-{
-       /* We do not have to prom memory to free */
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile b/target/linux/adm5120/files/arch/mips/adm5120/prom/Makefile
deleted file mode 100644 (file)
index d844b60..0000000
+++ /dev/null
@@ -1,9 +0,0 @@
-#
-# Makefile for the ADMtek ADM5120 SoC specific parts of the kernel
-#
-
-lib-y  += bootbase.o
-lib-y  += cfe.o
-lib-y  += generic.o
-lib-y  += myloader.o
-lib-y  += routerboot.o
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/bootbase.c
deleted file mode 100644 (file)
index cbdc598..0000000
+++ /dev/null
@@ -1,114 +0,0 @@
-/*
- *  $Id$
- *
- *  ZyXEL's Bootbase specific prom routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <adm5120_defs.h>
-#include <prom/zynos.h>
-#include "prom_read.h"
-
-#define ZYNOS_INFO_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x3F90)
-#define ZYNOS_HDBG_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x4000)
-#define BOOTEXT_ADDR_MIN       KSEG1ADDR(ADM5120_SRAM0_BASE)
-#define BOOTEXT_ADDR_MAX       (BOOTEXT_ADDR_MIN + (2*1024*1024))
-
-static int bootbase_found;
-static struct zynos_board_info *board_info;
-
-struct bootbase_info bootbase_info;
-
-static inline int bootbase_dbgarea_present(u8 *data)
-{
-       u32 t;
-
-       t = prom_read_be32(data+5);
-       if (t != ZYNOS_MAGIC_DBGAREA1)
-               return 0;
-
-       t = prom_read_be32(data+9);
-       if (t != ZYNOS_MAGIC_DBGAREA2)
-               return 0;
-
-       return 1;
-}
-
-static inline u32 bootbase_get_bootext_addr(void)
-{
-       return prom_read_be32(&board_info->bootext_addr);
-}
-
-static inline u16 bootbase_get_vendor_id(void)
-{
-#define CHECK_VENDOR(n) (strnicmp(board_info->vendor, (n), strlen(n)) == 0)
-       unsigned char vendor[ZYNOS_NAME_LEN];
-       int i;
-
-       for (i = 0; i < ZYNOS_NAME_LEN; i++)
-               vendor[i] = board_info->vendor[i];
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_ZYXEL)
-               return ZYNOS_VENDOR_ID_ZYXEL;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_DLINK)
-               return ZYNOS_VENDOR_ID_DLINK;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_LUCENT)
-               return ZYNOS_VENDOR_ID_LUCENT;
-
-       if CHECK_VENDOR(ZYNOS_VENDOR_NETGEAR)
-               return ZYNOS_VENDOR_ID_NETGEAR;
-
-       return ZYNOS_VENDOR_ID_OTHER;
-}
-
-static inline u16 bootbase_get_board_id(void)
-{
-       return prom_read_be16(&board_info->board_id);
-}
-
-int __init bootbase_present(void)
-{
-       u32     t;
-
-       if (bootbase_found)
-               goto out;
-
-       /* check presence of the dbgarea */
-       if (bootbase_dbgarea_present((u8 *)ZYNOS_HDBG_ADDR) == 0)
-               goto out;
-
-       board_info = (struct zynos_board_info *)(ZYNOS_INFO_ADDR);
-
-       /* check for a valid BootExt address */
-       t = bootbase_get_bootext_addr();
-       if ((t < BOOTEXT_ADDR_MIN) || (t > BOOTEXT_ADDR_MAX))
-               goto out;
-
-       bootbase_info.vendor_id = bootbase_get_vendor_id();
-       bootbase_info.board_id = bootbase_get_board_id();
-
-       bootbase_found = 1;
-
-out:
-       return bootbase_found;
-}
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/cfe.c
deleted file mode 100644 (file)
index 6999408..0000000
+++ /dev/null
@@ -1,72 +0,0 @@
-/*
- *  $Id$
- *
- *  Broadcom's CFE specific prom routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <prom/cfe.h>
-#include "prom_read.h"
-
-/*
- * CFE based boards
- */
-#define CFE_EPTSEAL    0x43464531 /* CFE1 is the magic number to recognize CFE
-from other bootloaders */
-
-static int cfe_found;
-
-static u32 cfe_handle;
-static u32 cfe_entry;
-static u32 cfe_seal;
-
-int __init cfe_present(void)
-{
-       /*
-        * This method only works, when we are booted directly from the CFE.
-        */
-       u32 a1 = (u32) fw_arg1;
-
-       if (cfe_found)
-               return 1;
-
-       cfe_handle = (u32) fw_arg0;
-       cfe_entry = (u32) fw_arg2;
-       cfe_seal = (u32) fw_arg3;
-
-       /* Check for CFE by finding the CFE magic number */
-       if (cfe_seal != CFE_EPTSEAL)
-               return 0;
-
-       /* cfe_a1_val must be 0, because only one CPU present in the ADM5120 */
-       if (a1 != 0)
-               return 0;
-
-       /* The cfe_handle, and the cfe_entry must be kernel mode addresses */
-       if ((cfe_handle < KSEG0) || (cfe_entry < KSEG0))
-               return 0;
-
-       cfe_found = 1;
-       return 1;
-}
-
-char *cfe_getenv(char *envname)
-{
-       if (cfe_found == 0)
-               return NULL;
-
-       return NULL;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/generic.c
deleted file mode 100644 (file)
index 5849942..0000000
+++ /dev/null
@@ -1,50 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic PROM routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-
-#include <prom/generic.h>
-
-static int *_prom_argc;
-static char **_prom_argv;
-static char **_prom_envp;
-
-char *generic_prom_getenv(char *envname)
-{
-       char **env;
-       char *ret;
-
-       ret = NULL;
-       for (env = _prom_envp; *env != NULL; env++) {
-               if (strcmp(envname, *env++) == 0) {
-                       ret = *env;
-                       break;
-               }
-       }
-
-       return ret;
-}
-
-int generic_prom_present(void)
-{
-       _prom_argc = (int *)fw_arg0;
-       _prom_argv = (char **)fw_arg1;
-       _prom_envp = (char **)fw_arg2;
-
-       return 1;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/myloader.c
deleted file mode 100644 (file)
index e85ef7a..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  $Id$
- *
- *  Compex's MyLoader specific prom routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-#include <asm/byteorder.h>
-
-#include <adm5120_defs.h>
-#include <prom/myloader.h>
-#include "prom_read.h"
-
-#define SYS_PARAMS_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F000)
-#define BOARD_PARAMS_ADDR      KSEG1ADDR(ADM5120_SRAM0_BASE+0x0F800)
-#define PART_TABLE_ADDR                KSEG1ADDR(ADM5120_SRAM0_BASE+0x10000)
-
-static int myloader_found;
-
-struct myloader_info myloader_info;
-
-int __init myloader_present(void)
-{
-       struct mylo_system_params *sysp;
-       struct mylo_board_params *boardp;
-       struct mylo_partition_table *parts;
-
-       if (myloader_found)
-               goto out;
-
-       sysp = (struct mylo_system_params *)(SYS_PARAMS_ADDR);
-       boardp = (struct mylo_board_params *)(BOARD_PARAMS_ADDR);
-       parts = (struct mylo_partition_table *)(PART_TABLE_ADDR);
-
-       /* Check for some magic numbers */
-       if ((le32_to_cpu(sysp->magic) != MYLO_MAGIC_SYS_PARAMS) ||
-          (le32_to_cpu(boardp->magic) != MYLO_MAGIC_BOARD_PARAMS) ||
-          (le32_to_cpu(parts->magic) != MYLO_MAGIC_PARTITIONS))
-               goto out;
-
-       myloader_info.vid = le32_to_cpu(sysp->vid);
-       myloader_info.did = le32_to_cpu(sysp->did);
-       myloader_info.svid = le32_to_cpu(sysp->svid);
-       myloader_info.sdid = le32_to_cpu(sysp->sdid);
-
-       myloader_found = 1;
-
-out:
-       return myloader_found;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h b/target/linux/adm5120/files/arch/mips/adm5120/prom/prom_read.h
deleted file mode 100644 (file)
index d6b21c0..0000000
+++ /dev/null
@@ -1,53 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic prom definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PROM_H_
-#define _ADM5120_PROM_H_
-
-/*
- * Helper routines
- */
-static inline u16 prom_read_le16(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u16)p[0] + ((u16)p[1] << 8));
-}
-
-static inline u32 prom_read_le32(void *buf)
-{
-       u8 *p = buf;
-
-       return ((u32)p[0] + ((u32)p[1] << 8) + ((u32)p[2] << 16) +
-               ((u32)p[3] << 24));
-}
-
-static inline u16 prom_read_be16(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u16)p[0] << 8) + (u16)p[1]);
-}
-
-static inline u32 prom_read_be32(void *buf)
-{
-       u8 *p = buf;
-
-       return (((u32)p[0] << 24) + ((u32)p[1] << 16) + ((u32)p[2] << 8) +
-               ((u32)p[3]));
-}
-
-#endif /* _ADM5120_PROM_H_ */
-
-
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c b/target/linux/adm5120/files/arch/mips/adm5120/prom/routerboot.c
deleted file mode 100644 (file)
index ce4ce23..0000000
+++ /dev/null
@@ -1,124 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik's RouterBOOT specific prom routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/autoconf.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/string.h>
-#include <linux/module.h>
-
-#include <asm/bootinfo.h>
-#include <asm/addrspace.h>
-
-#include <adm5120_defs.h>
-#include <prom/routerboot.h>
-#include "prom_read.h"
-
-struct rb_hard_settings rb_hs;
-static int rb_found;
-
-static int __init routerboot_load_hs(u8 *buf, u16 buflen)
-{
-       u16 id, len;
-
-       memset(&rb_hs, 0, sizeof(rb_hs));
-
-       if (buflen < 4)
-               return -1;
-
-       if (prom_read_le32(buf) != RB_MAGIC_HARD)
-               return -1;
-
-       /* skip magic value */
-       buf += 4;
-       buflen -= 4;
-
-       while (buflen > 2) {
-               id = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-               if (id == RB_ID_TERMINATOR || buflen < 2)
-                       break;
-
-               len = prom_read_le16(buf);
-               buf += 2;
-               buflen -= 2;
-
-               if (buflen < len)
-                       break;
-
-               switch (id) {
-               case RB_ID_BIOS_VERSION:
-                       rb_hs.bios_ver = (char *)buf;
-                       break;
-               case RB_ID_BOARD_NAME:
-                       rb_hs.name = (char *)buf;
-                       break;
-               case RB_ID_MEMORY_SIZE:
-                       rb_hs.mem_size = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_COUNT:
-                       rb_hs.mac_count = prom_read_le32(buf);
-                       break;
-               case RB_ID_MAC_ADDRESS_PACK:
-                       if ((len / RB_MAC_SIZE) > 0)
-                               rb_hs.mac_base = buf;
-                       break;
-               }
-
-               buf += len;
-               buflen -= len;
-
-       }
-
-       return 0;
-}
-
-#define RB_BS_OFFS     0x14
-#define RB_OFFS_MAX    (128*1024)
-
-int __init routerboot_present(void)
-{
-       struct rb_bios_settings *bs;
-       u8 *base;
-       u32 off, len;
-
-       if (rb_found)
-               goto out;
-
-       base = (u8 *)KSEG1ADDR(ADM5120_SRAM0_BASE);
-       bs = (struct rb_bios_settings *)(base + RB_BS_OFFS);
-
-       off = prom_read_le32(&bs->hs_offs);
-       len = prom_read_le32(&bs->hs_size);
-       if (off > RB_OFFS_MAX)
-               goto out;
-
-       if (routerboot_load_hs(base+off, len) != 0)
-               goto out;
-
-       rb_found = 1;
-
-out:
-       return rb_found;
-}
-
-char *routerboot_get_boardname(void)
-{
-       if (rb_found == 0)
-               return NULL;
-
-       return rb_hs.name;
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/reset.c b/target/linux/adm5120/files/arch/mips/adm5120/reset.c
deleted file mode 100644 (file)
index 653d42c..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific reset routines
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices.
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <linux/irq.h>
-#include <linux/io.h>
-
-#include <asm/addrspace.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-void (*adm5120_board_reset)(void);
-
-void adm5120_restart(char *command)
-{
-       /* TODO: stop switch before reset */
-
-       if (adm5120_board_reset)
-               adm5120_board_reset();
-
-       SW_WRITE_REG(SWITCH_REG_SOFT_RESET, 1);
-}
-
-void adm5120_halt(void)
-{
-       local_irq_disable();
-
-       while (1) {
-               if (cpu_wait)
-                       cpu_wait();
-       };
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/setup.c b/target/linux/adm5120/files/arch/mips/adm5120/setup.c
deleted file mode 100644 (file)
index 418a342..0000000
+++ /dev/null
@@ -1,67 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific setup
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/io.h>
-
-#include <asm/reboot.h>
-#include <asm/time.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_board.h>
-
-static char *prom_names[ADM5120_PROM_LAST+1] __initdata = {
-       [ADM5120_PROM_GENERIC]          = "Generic",
-       [ADM5120_PROM_CFE]              = "CFE",
-       [ADM5120_PROM_UBOOT]            = "U-Boot",
-       [ADM5120_PROM_MYLOADER]         = "MyLoader",
-       [ADM5120_PROM_ROUTERBOOT]       = "RouterBOOT",
-       [ADM5120_PROM_BOOTBASE]         = "Bootbase"
-};
-
-static void __init adm5120_report(void)
-{
-       printk(KERN_INFO "SoC      : ADM%04X%s revision %d, running "
-               "at %ldMHz\n",
-               adm5120_product_code,
-               adm5120_package_bga() ? "" : "P",
-               adm5120_revision, (adm5120_speed / 1000000));
-       printk(KERN_INFO "Bootdev  : %s flash\n",
-               adm5120_nand_boot ? "NAND":"NOR");
-       printk(KERN_INFO "Prom     : %s\n", prom_names[adm5120_prom_type]);
-}
-
-void __init plat_mem_setup(void)
-{
-       adm5120_soc_init();
-       adm5120_mem_init();
-       adm5120_report();
-
-       _machine_restart = adm5120_restart;
-       _machine_halt = adm5120_halt;
-       pm_power_off = adm5120_halt;
-
-       set_io_port_base(KSEG1);
-}
diff --git a/target/linux/adm5120/files/arch/mips/adm5120/time.c b/target/linux/adm5120/files/arch/mips/adm5120/time.c
deleted file mode 100644 (file)
index 63191d4..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific hooks for MIPS CPU Counter/Compare timer
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was based on: arch/mips/gt64120/wrppmc/time.c
- *     Original author: Mark.Zhan
- *     Copyright (C) 1996, 1997, 2004 by Ralf Baechle
- *     Copyright (C) 2006, Wind River System Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/types.h>
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/timex.h>
-
-#include <asm/irq.h>
-#include <asm/cpu.h>
-#include <asm/time.h>
-
-#include <adm5120_info.h>
-#include <adm5120_irq.h>
-
-void __init plat_time_init(void)
-{
-       mips_hpt_frequency = adm5120_speed / 2;
-}
diff --git a/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c b/target/linux/adm5120/files/arch/mips/pci/pci-adm5120.c
deleted file mode 100644 (file)
index b0caef2..0000000
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 PCI Host Controller driver
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This code was based on the ADM5120 specific port of the Linux 2.6.10 kernel
- *  done by Jeroen Vreeken
- *     Copyright (C) 2005 Jeroen Vreeken (pe1rxq@amsat.org)
- *
- *  Jeroen's code was based on the Linux 2.4.xx source codes found in various
- *  tarballs released by Edimax for it's ADM5120 based devices
- *     Copyright (C) ADMtek Incorporated
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-
-#include <linux/pci.h>
-#include <linux/pci_ids.h>
-#include <linux/pci_regs.h>
-
-#include <asm/delay.h>
-#include <asm/bootinfo.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_platform.h>
-
-#undef DEBUG
-
-#ifdef DEBUG
-#define DBG(f, a...)   printk(KERN_DEBUG f, ## a)
-#else
-#define DBG(f, a...)   do {} while (0)
-#endif
-
-#define PCI_ENABLE 0x80000000
-
-/* -------------------------------------------------------------------------*/
-
-static unsigned int adm5120_pci_nr_irqs __initdata;
-static struct adm5120_pci_irq *adm5120_pci_irq_map __initdata;
-
-static spinlock_t pci_lock = SPIN_LOCK_UNLOCKED;
-
-/* -------------------------------------------------------------------------*/
-
-static inline void write_cfgaddr(u32 addr)
-{
-       __raw_writel((addr | PCI_ENABLE),
-               (void __iomem *)(KSEG1ADDR(ADM5120_PCICFG_ADDR)));
-}
-
-static inline void write_cfgdata(u32 data)
-{
-       __raw_writel(data, (void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 read_cfgdata(void)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_PCICFG_DATA));
-}
-
-static inline u32 mkaddr(struct pci_bus *bus, unsigned int devfn, int where)
-{
-       return (((bus->number & 0xFF) << 16) | ((devfn & 0xFF) << 8) | \
-               (where & 0xFC));
-}
-
-/* -------------------------------------------------------------------------*/
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 *val)
-{
-       unsigned long flags;
-       u32 data;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_read  %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               if (where & 1)
-                       data >>= 8;
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFF;
-               break;
-       case 2:
-               if (where & 2)
-                       data >>= 16;
-               data &= 0xFFFF;
-               break;
-       }
-
-       *val = data;
-       DBG(", 0x%08X returned\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn, int where,
-               int size, u32 val)
-{
-       unsigned long flags;
-       u32 data;
-       int s;
-
-       spin_lock_irqsave(&pci_lock, flags);
-
-       write_cfgaddr(mkaddr(bus, devfn, where));
-       data = read_cfgdata();
-
-       DBG("PCI: cfg_write %02u.%02u.%01u/%02X:%01d, cfg:0x%08X",
-               bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn),
-               where, size, data);
-
-       switch (size) {
-       case 1:
-               s = ((where & 3) << 3);
-               data &= ~(0xFF << s);
-               data |= ((val & 0xFF) << s);
-               break;
-       case 2:
-               s = ((where & 2) << 4);
-               data &= ~(0xFFFF << s);
-               data |= ((val & 0xFFFF) << s);
-               break;
-       case 4:
-               data = val;
-               break;
-       }
-
-       write_cfgdata(data);
-       DBG(", 0x%08X written\n", data);
-
-       spin_unlock_irqrestore(&pci_lock, flags);
-
-       return PCIBIOS_SUCCESSFUL;
-}
-
-struct pci_ops adm5120_pci_ops = {
-       .read   = pci_config_read,
-       .write  = pci_config_write,
-};
-
-/* -------------------------------------------------------------------------*/
-
-static void adm5120_pci_fixup(struct pci_dev *dev)
-{
-       if (dev->devfn != 0)
-               return;
-
-       /* setup COMMAND register */
-       pci_write_config_word(dev, PCI_COMMAND,
-               (PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER));
-
-       /* setup CACHE_LINE_SIZE register */
-       pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
-
-       /* setup BARS */
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_0, 0);
-       pci_write_config_dword(dev, PCI_BASE_ADDRESS_1, 0);
-}
-
-DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_ADMTEK, PCI_DEVICE_ID_ADMTEK_ADM5120,
-       adm5120_pci_fixup);
-
-/* -------------------------------------------------------------------------*/
-
-void __init adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-       adm5120_pci_nr_irqs = nr_irqs;
-       adm5120_pci_irq_map = map;
-}
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
-       int irq = -1;
-       int i;
-
-       if ((!adm5120_pci_nr_irqs) || (!adm5120_pci_irq_map)) {
-               printk(KERN_ALERT "PCI: pci_irq_map is not initialized\n");
-               goto out;
-       }
-
-       if (slot < 1 || slot > 3) {
-               printk(KERN_ALERT "PCI: slot number %u is not supported\n",
-                       slot);
-               goto out;
-       }
-
-       for (i = 0; i < adm5120_pci_nr_irqs; i++) {
-               if ((adm5120_pci_irq_map[i].slot == slot)
-                       && (adm5120_pci_irq_map[i].func == PCI_FUNC(dev->devfn))
-                       && (adm5120_pci_irq_map[i].pin == pin)) {
-                       irq = adm5120_pci_irq_map[i].irq;
-                       break;
-               }
-       }
-
-       if (irq < 0) {
-               printk(KERN_ALERT "PCI: no irq found for %s pin:%u\n",
-                       pci_name((struct pci_dev *)dev), pin);
-       } else {
-               printk(KERN_INFO "PCI: mapping irq for %s pin:%u, irq:%d\n",
-                       pci_name((struct pci_dev *)dev), pin, irq);
-       }
-
-out:
-       return irq;
-}
-
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
-       return 0;
-}
-
-/* -------------------------------------------------------------------------*/
-
-static struct resource pci_io_resource = {
-       .name   = "ADM5120 PCI I/O",
-       .start  = ADM5120_PCIIO_BASE,
-       .end    = ADM5120_PCICFG_ADDR-1,
-       .flags  = IORESOURCE_IO
-};
-
-static struct resource pci_mem_resource = {
-       .name   = "ADM5120 PCI MEM",
-       .start  = ADM5120_PCIMEM_BASE,
-       .end    = ADM5120_PCIIO_BASE-1,
-       .flags  = IORESOURCE_MEM
-};
-
-static struct pci_controller adm5120_controller = {
-       .pci_ops        = &adm5120_pci_ops,
-       .io_resource    = &pci_io_resource,
-       .mem_resource   = &pci_mem_resource,
-};
-
-static int __init adm5120_pci_setup(void)
-{
-       int pci_bios;
-
-       pci_bios = adm5120_has_pci();
-
-       printk(KERN_INFO "adm5120: system has %sPCI BIOS\n",
-               pci_bios ? "" : "no ");
-       if (pci_bios == 0)
-               return -1;
-
-       /* Avoid ISA compat ranges.  */
-       PCIBIOS_MIN_IO = 0x00000000;
-       PCIBIOS_MIN_MEM = 0x00000000;
-
-       /* Set I/O resource limits.  */
-       ioport_resource.end = 0x1fffffff;
-       iomem_resource.end = 0xffffffff;
-
-       register_pci_controller(&adm5120_controller);
-       return 0;
-}
-
-arch_initcall(adm5120_pci_setup);
diff --git a/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c b/target/linux/adm5120/files/drivers/ata/pata_rb153_cf.c
deleted file mode 100644 (file)
index 8c0a0a3..0000000
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- *  A low-level PATA driver to handle a Compact Flash connected on the
- *  Mikrotik's RouterBoard 153 board.
- *
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was based on: drivers/ata/pata_ixp4xx_cf.c
- *     Copyright (C) 2006-07 Tower Technologies
- *     Author: Alessandro Zummo <a.zummo@towertech.it>
- *
- *  Also was based on the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series devices. The original Mikrotik code
- *  seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-
-#include <linux/io.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-
-#include <linux/libata.h>
-#include <scsi/scsi_host.h>
-
-#include <asm/gpio.h>
-
-#define DRV_NAME       "pata-rb153-cf"
-#define DRV_VERSION    "0.4.0"
-#define DRV_DESC       "PATA driver for RouterBOARD 153 Compact Flash"
-
-#define RB153_CF_MAXPORTS      1
-#define RB153_CF_IO_DELAY      100
-
-#define RB153_CF_REG_CMD       0x0800
-#define RB153_CF_REG_CTRL      0x080E
-#define RB153_CF_REG_DATA      0x0C00
-
-struct rb153_cf_info {
-       unsigned int    irq;
-       void __iomem    *iobase;
-       unsigned int    gpio_line;
-       int             frozen;
-};
-
-/* ------------------------------------------------------------------------ */
-
-static inline void rb153_pata_finish_io(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       ata_altstatus(ap);
-       ndelay(RB153_CF_IO_DELAY);
-
-       set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-}
-
-static void rb153_pata_exec_command(struct ata_port *ap,
-                               const struct ata_taskfile *tf)
-{
-       writeb(tf->command, ap->ioaddr.command_addr);
-       rb153_pata_finish_io(ap);
-}
-
-static unsigned int rb153_pata_data_xfer(struct ata_device *adev, unsigned char *buf,
-                               unsigned int buflen, int write_data)
-{
-       void __iomem *ioaddr = adev->link->ap->ioaddr.data_addr;
-       unsigned int t;
-       
-       t = buflen;     
-       if (write_data) {
-               for (; t > 0; t--, buf++)
-                       writeb(*buf, ioaddr);
-       } else {
-               for (; t > 0; t--, buf++)
-                       *buf = readb(ioaddr);
-       }
-
-       rb153_pata_finish_io(adev->link->ap);
-       return buflen;
-}
-
-static void rb153_pata_freeze(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 1;
-}
-
-static void rb153_pata_thaw(struct ata_port *ap)
-{
-       struct rb153_cf_info *info = ap->host->private_data;
-
-       info->frozen = 0;
-}
-
-static irqreturn_t rb153_pata_irq_handler(int irq, void *dev_instance)
-{
-       struct ata_host *ah = dev_instance;
-       struct rb153_cf_info *info = ah->private_data;
-
-       if (gpio_get_value(info->gpio_line)) {
-               set_irq_type(info->irq, IRQ_TYPE_LEVEL_LOW);
-               if (!info->frozen)
-                       ata_interrupt(irq, dev_instance);
-       } else {
-               set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH);
-       }
-
-       return IRQ_HANDLED;
-}
-
-static void rb153_pata_irq_clear(struct ata_port *ap)
-{
-}
-
-static int rb153_pata_port_start(struct ata_port *ap)
-{
-       return 0;
-}
-
-static struct ata_port_operations rb153_pata_port_ops = {
-       .tf_load                = ata_tf_load,
-       .tf_read                = ata_tf_read,
-
-       .exec_command           = rb153_pata_exec_command,
-       .check_status           = ata_check_status,
-       .dev_select             = ata_std_dev_select,
-
-       .data_xfer              = rb153_pata_data_xfer,
-
-       .qc_prep                = ata_qc_prep,
-       .qc_issue               = ata_qc_issue_prot,
-
-       .freeze                 = rb153_pata_freeze,
-       .thaw                   = rb153_pata_thaw,
-       .error_handler          = ata_bmdma_error_handler,
-       .cable_detect           = ata_cable_40wire,
-
-       .irq_handler            = rb153_pata_irq_handler,
-       .irq_clear              = rb153_pata_irq_clear,
-       .irq_on                 = ata_irq_on,
-
-       .port_start             = rb153_pata_port_start,
-};
-
-/* ------------------------------------------------------------------------ */
-
-static struct scsi_host_template rb153_pata_sht = {
-       .module                 = THIS_MODULE,
-       .name                   = DRV_NAME,
-       .ioctl                  = ata_scsi_ioctl,
-       .queuecommand           = ata_scsi_queuecmd,
-       .slave_configure        = ata_scsi_slave_config,
-       .slave_destroy          = ata_scsi_slave_destroy,
-       .bios_param             = ata_std_bios_param,
-       .proc_name              = DRV_NAME,
-
-       .can_queue              = ATA_DEF_QUEUE,
-       .this_id                = ATA_SHT_THIS_ID,
-       .sg_tablesize           = LIBATA_MAX_PRD,
-       .dma_boundary           = ATA_DMA_BOUNDARY,
-       .cmd_per_lun            = ATA_SHT_CMD_PER_LUN,
-       .emulated               = ATA_SHT_EMULATED,
-       .use_clustering         = ATA_SHT_USE_CLUSTERING,
-};
-
-/* ------------------------------------------------------------------------ */
-
-static void rb153_pata_setup_port(struct ata_port *ap,
-                       struct rb153_cf_info *info, unsigned long raw_cmd)
-{
-       ap->ioaddr.cmd_addr     = info->iobase + RB153_CF_REG_CMD;
-       ap->ioaddr.ctl_addr     = info->iobase + RB153_CF_REG_CTRL;
-       ap->ioaddr.altstatus_addr = info->iobase + RB153_CF_REG_CTRL;
-
-       ata_std_ports(&ap->ioaddr);
-
-       ap->ioaddr.data_addr    = info->iobase + RB153_CF_REG_DATA;
-
-       ata_port_desc(ap, "cmd 0x%lx ctl 0x%lx", raw_cmd,
-                               raw_cmd + RB153_CF_REG_CTRL);
-}
-
-static __devinit int rb153_pata_driver_probe(struct platform_device *pdev)
-{
-       unsigned int irq;
-       int gpio;
-       struct resource *res;
-       struct ata_host *ah;
-       struct ata_port *ap;
-       struct rb153_cf_info *info;
-       int ret;
-
-       res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-       if (!res) {
-               dev_err(&pdev->dev, "no IOMEM resource found\n");
-               return -EINVAL;
-       }
-
-       irq = platform_get_irq(pdev, 0);
-       if (irq <= 0) {
-               dev_err(&pdev->dev, "no IRQ resource found\n");
-               return -ENOENT;
-       }
-
-       gpio = irq_to_gpio(irq);
-       if (gpio < 0) {
-               dev_err(&pdev->dev, "no GPIO found for irq%d\n", irq);
-               return -ENOENT;
-       }
-
-       ret = gpio_request(gpio, DRV_NAME);
-       if (ret) {
-               dev_err(&pdev->dev, "GPIO request failed\n");
-               return ret;
-       }
-
-       /* allocate host */
-       ah = ata_host_alloc(&pdev->dev, RB153_CF_MAXPORTS);
-       if (!ah)
-               return -ENOMEM;
-
-       platform_set_drvdata(pdev, ah);
-
-       info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-       if (!info)
-               return -ENOMEM;
-
-       ah->private_data = info;
-       info->gpio_line = gpio;
-       info->irq = irq;
-
-       info->iobase = devm_ioremap_nocache(&pdev->dev, res->start,
-                               res->end - res->start + 1);
-       if (!info->iobase)
-               return -ENOMEM;
-
-       ret = gpio_direction_input(gpio);
-       if (ret) {
-               dev_err(&pdev->dev, "unable to set GPIO direction, err=%d\n",
-                               ret);
-               goto err_free_gpio;
-       }
-
-       ap = ah->ports[0];
-
-       ap->ops         = &rb153_pata_port_ops;
-       ap->pio_mask    = 0x1f; /* PIO4 */
-       ap->flags       = ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO;
-
-       rb153_pata_setup_port(ap, info, res->start);
-
-       ret = ata_host_activate(ah, irq, rb153_pata_irq_handler,
-                               IRQF_TRIGGER_LOW, &rb153_pata_sht);
-       if (ret)
-               goto err_free_gpio;
-
-       return 0;
-
-err_free_gpio:
-       gpio_free(gpio);
-
-       return ret;
-}
-
-static __devexit int rb153_pata_driver_remove(struct platform_device *pdev)
-{
-       struct ata_host *ah = platform_get_drvdata(pdev);
-       struct rb153_cf_info *info = ah->private_data;
-
-       ata_host_detach(ah);
-       gpio_free(info->gpio_line);
-
-       return 0;
-}
-
-static struct platform_driver rb153_pata_platform_driver = {
-       .probe          = rb153_pata_driver_probe,
-       .remove         = __devexit_p(rb153_pata_driver_remove),
-       .driver  = {
-               .name   = DRV_NAME,
-               .owner  = THIS_MODULE,
-       },
-};
-
-/* ------------------------------------------------------------------------ */
-
-#define DRV_INFO DRV_DESC " version " DRV_VERSION
-
-static int __init rb153_pata_module_init(void)
-{
-       printk(KERN_INFO DRV_INFO "\n");
-
-       return platform_driver_register(&rb153_pata_platform_driver);
-}
-
-static void __exit rb153_pata_module_exit(void)
-{
-       platform_driver_unregister(&rb153_pata_platform_driver);
-}
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
-MODULE_LICENSE("GPL v2");
-
-module_init(rb153_pata_module_init);
-module_exit(rb153_pata_module_exit);
diff --git a/target/linux/adm5120/files/drivers/leds/leds-adm5120.c b/target/linux/adm5120/files/drivers/leds/leds-adm5120.c
deleted file mode 100644 (file)
index 2eb4083..0000000
+++ /dev/null
@@ -1,431 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 GPIO LED devices
- *
- *  Copyright (C) 2007,2008 OpenWrt.org
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <linux/err.h>
-
-#include <linux/io.h>
-#include <linux/leds.h>
-
-#include <asm/bootinfo.h>
-#include <asm/gpio.h>
-
-#include <adm5120_info.h>
-
-#define DRV_DESC       "LED driver for the ADM5120 based boards"
-#define DRV_VERSION    "0.2.1"
-
-#define NUM_LEDS_MAX   23
-#define ADM5120_GPIO_xxxx      0x100   /* an unknown pin */
-
-struct mach_data {
-       unsigned long machtype;
-       unsigned nr_leds;
-       struct gpio_led *leds;
-};
-
-struct adm5120_leddev {
-       struct platform_device pdev;
-       struct gpio_led led;
-       struct gpio_led_platform_data pdata;
-};
-
-static int led_count;
-static struct adm5120_leddev *led_devs[NUM_LEDS_MAX];
-
-#define LED_ARRAY(n)                           \
-static struct gpio_led n ## _leds [] __initdata =
-
-#define LED_DATA(n, t, g, a) { \
-       .name = (n),            \
-       .default_trigger = (t), \
-       .gpio = (g),            \
-       .active_low = (a)       \
-}
-
-#define LED_STD(g, n, t)       LED_DATA((n), (t), (g), 0)
-#define LED_INV(g, n, t)       LED_DATA((n), (t), (g), 1)
-
-/*
- * Cellvision boards
- */
-
-LED_ARRAY(cas771) {
-       LED_STD(ADM5120_GPIO_PIN0, "cam_flash", NULL),
-       /* GPIO PIN3 is the reset */
-       LED_STD(ADM5120_GPIO_PIN6, "access",    NULL),
-       LED_STD(ADM5120_GPIO_P0L1, "status",    NULL),
-       LED_STD(ADM5120_GPIO_P0L2, "diag",      NULL),
-};
-
-/*
- * Compex boards
- */
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(np27g) { /* FIXME: untested */
-       LED_STD(ADM5120_GPIO_xxxx, "lan1",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "lan2",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "lan3",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "lan4",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "wan_cond",  NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "wlan",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "wan_act",   NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "usb1",      NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "usb2",      NULL),
-       LED_INV(ADM5120_GPIO_PIN2, "power",     NULL),
-       LED_STD(ADM5120_GPIO_xxxx, "diag",      NULL),
-};
-#endif
-
-LED_ARRAY(np28g) {
-       LED_INV(ADM5120_GPIO_PIN2, "diag",      NULL),
-       LED_INV(ADM5120_GPIO_PIN3, "power",     NULL),
-       LED_INV(ADM5120_GPIO_PIN6, "wan_cond",  NULL),
-       LED_INV(ADM5120_GPIO_PIN7, "wifi",      NULL),
-       LED_INV(ADM5120_GPIO_P0L2, "usb1",      NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan1",      NULL),
-       LED_INV(ADM5120_GPIO_P1L2, "usb2",      NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2",      NULL),
-       LED_INV(ADM5120_GPIO_P2L2, "usb3",      NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan3",      NULL),
-       LED_INV(ADM5120_GPIO_P3L2, "usb4",      NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "wan",       NULL),
-};
-
-LED_ARRAY(wp54g) {
-       LED_INV(ADM5120_GPIO_PIN2, "diag",      NULL),
-       LED_INV(ADM5120_GPIO_PIN6, "wlan",      NULL),
-       LED_INV(ADM5120_GPIO_PIN7, "wan",       NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "lan1",      NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan2",      NULL),
-};
-
-/*
- * Edimax boards
- */
-LED_ARRAY(br6104k) {
-       LED_STD(ADM5120_GPIO_PIN0, "power",             NULL),
-       LED_INV(ADM5120_GPIO_P0L1, "wan_speed",         NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",        NULL),
-       LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",       NULL),
-};
-
-LED_ARRAY(br61x4wg) {
-       LED_STD(ADM5120_GPIO_PIN0, "power",             NULL),
-       LED_STD(ADM5120_GPIO_PIN5, "wlan",              NULL),
-       LED_INV(ADM5120_GPIO_P0L1, "wan_speed",         NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "wan_lnkact",        NULL),
-       LED_INV(ADM5120_GPIO_P1L1, "lan1_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan1_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P2L1, "lan2_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P4L1, "lan4_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "lan4_lnkact",       NULL),
-};
-
-/*
- * Infineon boards
- */
-LED_ARRAY(easy5120rt) {
-       LED_INV(ADM5120_GPIO_PIN6, "user",              NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "lan0_led1",         NULL),
-       LED_INV(ADM5120_GPIO_P0L1, "lan0_led2",         NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan1_led1",         NULL),
-       LED_INV(ADM5120_GPIO_P1L1, "lan1_led2",         NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2_led1",         NULL),
-       LED_INV(ADM5120_GPIO_P2L1, "lan2_led2",         NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan3_led1",         NULL),
-       LED_INV(ADM5120_GPIO_P3L1, "lan3_led2",         NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "wan",               NULL),
-};
-
-/*
- * Mikrotik boards
- */
-LED_ARRAY(rb100) {
-       LED_STD(ADM5120_GPIO_PIN3, "user",              NULL),
-        LED_INV(ADM5120_GPIO_P0L1, "lan_speed",        NULL),
-        LED_INV(ADM5120_GPIO_P0L0, "lan_lnkact",       NULL),
-};
-
-LED_ARRAY(rb133) {
-       LED_STD(ADM5120_GPIO_PIN6, "power",             NULL),
-       LED_STD(ADM5120_GPIO_PIN5, "user",              NULL),
-        LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",       NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",      NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P1L1, "lan2_speed",       NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P1L0, "lan2_lnkact",      NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P0L1, "lan3_speed",       NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P0L0, "lan3_lnkact",      NULL), /* untested */
-};
-
-LED_ARRAY(rb133c) {
-       LED_STD(ADM5120_GPIO_PIN6, "power",             NULL),
-       LED_STD(ADM5120_GPIO_PIN5, "user",              NULL),
-        LED_INV(ADM5120_GPIO_P2L1, "lan1_speed",       NULL), /* untested */
-        LED_INV(ADM5120_GPIO_P2L0, "lan1_lnkact",      NULL), /* untested */
-};
-
-LED_ARRAY(rb150) {
-       LED_STD(ADM5120_GPIO_P0L2, "user",              NULL),
-       LED_INV(ADM5120_GPIO_P0L1, "lan1_led1",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P0L0, "lan1_led2",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P1L1, "lan5_led1",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P1L0, "lan5_led2",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P2L1, "lan4_led1",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P2L0, "lan4_led2",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P3L1, "lan3_led1",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P3L0, "lan3_led2",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P4L1, "lan2_led1",         NULL), /* untested */
-       LED_INV(ADM5120_GPIO_P4L0, "lan2_led2",         NULL), /* untested */
-};
-
-LED_ARRAY(rb153) {
-       LED_STD(ADM5120_GPIO_PIN5, "user",              NULL),
-       LED_INV(ADM5120_GPIO_P0L1, "lan1_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "lan1_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P1L1, "lan5_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan5_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P2L1, "lan4_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan4_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P3L1, "lan3_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan3_lnkact",       NULL),
-       LED_INV(ADM5120_GPIO_P4L1, "lan2_speed",        NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "lan2_lnkact",       NULL),
-};
-
-/*
- * ZyXEL boards
- */
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(p334) { /* FIXME: untested */
-       LED_INV(ADM5120_GPIO_xxxx, "power",     NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "lan1",      NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "lan2",      NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "lan3",      NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "lan4",      NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "wan",       NULL),
-};
-#endif
-
-LED_ARRAY(p334wt) {
-       LED_INV(ADM5120_GPIO_PIN2, "power",     NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan1",      NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2",      NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan3",      NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "lan4",      NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "wan",       NULL),
-       LED_INV(ADM5120_GPIO_P4L2, "wlan",      NULL),
-       LED_INV(ADM5120_GPIO_P2L2, "otist",     NULL),
-       LED_INV(ADM5120_GPIO_P1L2, "hidden",    NULL),
-};
-
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-LED_ARRAY(p335) { /* FIXME: untested */
-       LED_INV(ADM5120_GPIO_PIN2, "power",     NULL),
-       LED_INV(ADM5120_GPIO_P3L0, "lan1",      NULL),
-       LED_INV(ADM5120_GPIO_P2L0, "lan2",      NULL),
-       LED_INV(ADM5120_GPIO_P1L0, "lan3",      NULL),
-       LED_INV(ADM5120_GPIO_P0L0, "lan4",      NULL),
-       LED_INV(ADM5120_GPIO_P4L0, "wan",       NULL),
-       LED_INV(ADM5120_GPIO_P4L2, "wlan",      NULL),
-       LED_INV(ADM5120_GPIO_P2L2, "otist",     NULL),
-       LED_INV(ADM5120_GPIO_xxxx, "usb",       NULL),
-};
-#endif
-
-/*
- * Generic board
- */
-LED_ARRAY(generic) {
-#if defined(CONFIG_LEDS_ADM5120_DIAG)
-       LED_STD(ADM5120_GPIO_PIN0, "gpio0",     NULL),
-       LED_STD(ADM5120_GPIO_PIN1, "gpio1",     NULL),
-       LED_STD(ADM5120_GPIO_PIN2, "gpio2",     NULL),
-       LED_STD(ADM5120_GPIO_PIN3, "gpio3",     NULL),
-       LED_STD(ADM5120_GPIO_PIN4, "gpio4",     NULL),
-       LED_STD(ADM5120_GPIO_PIN5, "gpio5",     NULL),
-       LED_STD(ADM5120_GPIO_PIN6, "gpio6",     NULL),
-       LED_STD(ADM5120_GPIO_PIN7, "gpio7",     NULL),
-       LED_STD(ADM5120_GPIO_P0L0, "port0led0", NULL),
-       LED_STD(ADM5120_GPIO_P0L1, "port0led1", NULL),
-       LED_STD(ADM5120_GPIO_P0L2, "port0led2", NULL),
-       LED_STD(ADM5120_GPIO_P1L0, "port1led0", NULL),
-       LED_STD(ADM5120_GPIO_P1L1, "port1led1", NULL),
-       LED_STD(ADM5120_GPIO_P1L2, "port1led2", NULL),
-       LED_STD(ADM5120_GPIO_P2L0, "port2led0", NULL),
-       LED_STD(ADM5120_GPIO_P2L1, "port2led1", NULL),
-       LED_STD(ADM5120_GPIO_P2L2, "port2led2", NULL),
-       LED_STD(ADM5120_GPIO_P3L0, "port3led0", NULL),
-       LED_STD(ADM5120_GPIO_P3L1, "port3led1", NULL),
-       LED_STD(ADM5120_GPIO_P3L2, "port3led2", NULL),
-       LED_STD(ADM5120_GPIO_P4L0, "port4led0", NULL),
-       LED_STD(ADM5120_GPIO_P4L1, "port4led1", NULL),
-       LED_STD(ADM5120_GPIO_P4L2, "port4led2", NULL),
-#endif
-};
-
-#define MACH_DATA(m, n) {                              \
-       .machtype       = (m),                          \
-       .nr_leds        = ARRAY_SIZE(n ## _leds),       \
-       .leds           = n ## _leds                    \
-}
-
-static struct mach_data machines[] __initdata = {
-       MACH_DATA(MACH_ADM5120_GENERIC, generic),
-       /* Cellvision */
-       MACH_DATA(MACH_ADM5120_CAS771, cas771),
-       /* Compex */
-       MACH_DATA(MACH_ADM5120_NP28G,   np28g),
-       MACH_DATA(MACH_ADM5120_NP28GHS, np28g),
-       MACH_DATA(MACH_ADM5120_WP54AG,  wp54g),
-       MACH_DATA(MACH_ADM5120_WP54G,   wp54g),
-       MACH_DATA(MACH_ADM5120_WP54G_WRT, wp54g),
-       MACH_DATA(MACH_ADM5120_WPP54AG, wp54g),
-       MACH_DATA(MACH_ADM5120_WPP54G,  wp54g),
-       /* Edimax */
-       MACH_DATA(MACH_ADM5120_BR6104K, br6104k),
-       MACH_DATA(MACH_ADM5120_BR61x4WG, br61x4wg),
-       /* Infineon */
-       MACH_DATA(MACH_ADM5120_EASY5120RT, easy5120rt),
-       /* Mikrotik */
-       MACH_DATA(MACH_ADM5120_RB_111,  rb100),
-       MACH_DATA(MACH_ADM5120_RB_112,  rb100),
-       MACH_DATA(MACH_ADM5120_RB_133,  rb133),
-       MACH_DATA(MACH_ADM5120_RB_133C, rb133c),
-       MACH_DATA(MACH_ADM5120_RB_150,  rb150),
-       MACH_DATA(MACH_ADM5120_RB_153,  rb153),
-       /* ZyXEL */
-       MACH_DATA(MACH_ADM5120_P334WT,  p334wt),
-#if defined(CONFIG_LEDS_ADM5120_EXPERIMENTAL)
-       /* untested */
-       MACH_DATA(MACH_ADM5120_P334,    p334),
-       MACH_DATA(MACH_ADM5120_P335,    p335),
-       MACH_DATA(MACH_ADM5120_NP27G,   np27g),
-#endif
-};
-
-static struct adm5120_leddev * __init
-create_leddev(int id, struct gpio_led *led)
-{
-       struct adm5120_leddev *p;
-
-       p = kzalloc(sizeof(*p), GFP_KERNEL);
-       if (p == NULL)
-               return NULL;
-
-       memcpy(&p->led, led, sizeof(p->led));
-       p->pdev.name = "leds-gpio";
-       p->pdev.id = id;
-       p->pdev.dev.platform_data = &p->pdata;
-       p->pdata.num_leds = 1;
-       p->pdata.leds = &p->led;
-
-       return p;
-}
-
-static struct mach_data * __init
-adm5120_leds_findmach(unsigned long machtype)
-{
-       struct mach_data *mach;
-       int i;
-
-       mach = NULL;
-       for (i = 0; i < ARRAY_SIZE(machines); i++) {
-               if (machines[i].machtype == machtype) {
-                       mach = &machines[i];
-                       break;
-               }
-       };
-
-#if defined(CONFIG_LEDS_ADM5120_DIAG)
-       if (mach == NULL)
-               mach = machines;
-#endif
-
-       return mach;
-}
-
-static int __init
-adm5120_leds_init(void)
-{
-       struct mach_data *mach;
-       int i, ret;
-
-       mach = adm5120_leds_findmach(mips_machtype);
-       if (mach == NULL) {
-               printk(KERN_ERR "leds-adm5120: unsupported board\n");
-               ret = -EINVAL;
-               goto err;
-       }
-
-       for (i = 0; i < mach->nr_leds; i++) {
-               led_devs[i] = create_leddev(i, &mach->leds[i]);
-               if (led_devs[i] == NULL) {
-                       ret = -ENOMEM;
-                       goto err_destroy;
-               }
-       }
-
-       for (i = 0; i < mach->nr_leds; i++) {
-               ret = platform_device_register(&led_devs[i]->pdev);
-               if (ret)
-                       goto err_unregister;
-       }
-
-       led_count = mach->nr_leds;
-       return 0;
-
-err_unregister:
-       for (i--; i >= 0; i--)
-               platform_device_unregister(&led_devs[i]->pdev);
-
-err_destroy:
-       for (i = 0; i < led_count; i++)
-               kfree(led_devs[i]);
-err:
-       return ret;
-}
-
-static void __exit
-adm5120_leds_exit(void)
-{
-       int i;
-
-       for (i = 0; i < led_count; i++) {
-               platform_device_unregister(&led_devs[i]->pdev);
-               kfree(led_devs[i]);
-       }
-}
-
-module_init(adm5120_leds_init);
-module_exit(adm5120_leds_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
-MODULE_VERSION(DRV_VERSION);
-
diff --git a/target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c b/target/linux/adm5120/files/drivers/leds/ledtrig-adm5120-switch.c
deleted file mode 100644 (file)
index b1b9c50..0000000
+++ /dev/null
@@ -1,149 +0,0 @@
-/*
- * LED ADM5120 Switch Port State Trigger
- *
- * Copyright (C) 2007 Bernhard Held <bernhard at bernhardheld.de>
- * Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was based on: drivers/leds/ledtrig-timer.c
- *     Copyright 2005-2006 Openedhand Ltd.
- *     Author: Richard Purdie
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/device.h>
-
-#include <asm/gpio.h>
-
-#include "leds.h"
-
-#define DRV_NAME "port_state"
-#define DRV_DESC "LED ADM5120 Switch Port State Trigger"
-
-struct port_state {
-       char *name;
-       unsigned int value;
-};
-
-#define PORT_STATE(n,v) {.name = (n), .value = (v)}
-
-static struct port_state port_states[] = {
-       PORT_STATE("off",               LED_OFF),
-       PORT_STATE("on",                LED_FULL),
-       PORT_STATE("flash",             ADM5120_GPIO_FLASH),
-       PORT_STATE("link",              ADM5120_GPIO_LINK),
-       PORT_STATE("speed",             ADM5120_GPIO_SPEED),
-       PORT_STATE("duplex",            ADM5120_GPIO_DUPLEX),
-       PORT_STATE("act",               ADM5120_GPIO_ACT),
-       PORT_STATE("coll",              ADM5120_GPIO_COLL),
-       PORT_STATE("link_act",          ADM5120_GPIO_LINK_ACT),
-       PORT_STATE("duplex_coll",       ADM5120_GPIO_DUPLEX_COLL),
-       PORT_STATE("10M_act",           ADM5120_GPIO_10M_ACT),
-       PORT_STATE("100M_act",          ADM5120_GPIO_100M_ACT),
-};
-
-static ssize_t led_port_state_show(struct device *dev,
-               struct device_attribute *attr, char *buf)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       struct port_state *state = led_cdev->trigger_data;
-       int len = 0;
-       int i;
-
-       *buf = '\0';
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               if (&port_states[i] == state)
-                       len += sprintf(buf+len, "[%s] ", port_states[i].name);
-               else
-                       len += sprintf(buf+len, "%s ", port_states[i].name);
-       }
-       len += sprintf(buf+len, "\n");
-
-       return len;
-}
-
-static ssize_t led_port_state_store(struct device *dev,
-               struct device_attribute *attr, const char *buf, size_t size)
-{
-       struct led_classdev *led_cdev = dev_get_drvdata(dev);
-       size_t len;
-       int i;
-
-       for (i = 0; i < ARRAY_SIZE(port_states); i++) {
-               len = strlen(port_states[i].name);
-               if (strncmp(port_states[i].name, buf, len) != 0)
-                       continue;
-
-               if (buf[len] != '\0' && buf[len] != '\n')
-                       continue;
-
-               led_cdev->trigger_data = &port_states[i];
-               led_set_brightness(led_cdev, port_states[i].value);
-               return size;
-       }
-
-       return -EINVAL;
-}
-
-static DEVICE_ATTR(port_state, 0644, led_port_state_show,
-                        led_port_state_store);
-
-static void adm5120_switch_trig_activate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = port_states;
-       int rc;
-
-       led_cdev->trigger_data = state;
-
-       rc = device_create_file(led_cdev->dev, &dev_attr_port_state);
-       if (rc)
-               goto err;
-
-       led_set_brightness(led_cdev, state->value);
-
-       return;
-err:
-       led_cdev->trigger_data = NULL;
-}
-
-static void adm5120_switch_trig_deactivate(struct led_classdev *led_cdev)
-{
-       struct port_state *state = led_cdev->trigger_data;
-
-       if (!state)
-               return;
-
-       device_remove_file(led_cdev->dev, &dev_attr_port_state);
-
-}
-
-static struct led_trigger adm5120_switch_led_trigger = {
-       .name           = DRV_NAME,
-       .activate       = adm5120_switch_trig_activate,
-       .deactivate     = adm5120_switch_trig_deactivate,
-};
-
-static int __init adm5120_switch_trig_init(void)
-{
-       led_trigger_register(&adm5120_switch_led_trigger);
-       return 0;
-}
-
-static void __exit adm5120_switch_trig_exit(void)
-{
-       led_trigger_unregister(&adm5120_switch_led_trigger);
-}
-
-module_init(adm5120_switch_trig_init);
-module_exit(adm5120_switch_trig_exit);
-
-MODULE_AUTHOR("Bernhard Held <bernhard at bernhardheld.de>, "
-               "Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c b/target/linux/adm5120/files/drivers/mtd/maps/adm5120-flash.c
deleted file mode 100644 (file)
index c637c4f..0000000
+++ /dev/null
@@ -1,571 +0,0 @@
-/*
- *  $Id$
- *
- *  Platform driver for NOR flash devices on ADM5120 based boards
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was derived from: drivers/mtd/map/physmap.c
- *     Copyright (C) 2003 MontaVista Software Inc.
- *     Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/slab.h>
-#include <linux/io.h>
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-#include <adm5120_mpmc.h>
-#include <adm5120_platform.h>
-
-#define DRV_NAME       "adm5120-flash"
-#define DRV_DESC       "ADM5120 flash MAP driver"
-#define MAX_PARSED_PARTS 8
-
-#ifdef ADM5120_FLASH_DEBUG
-#define MAP_DBG(m, f, a...)    printk(KERN_INFO "%s: " f, (m->name) , ## a)
-#else
-#define MAP_DBG(m, f, a...)    do {} while (0)
-#endif
-#define MAP_ERR(m, f, a...)    printk(KERN_ERR "%s: " f, (m->name) , ## a)
-#define MAP_INFO(m, f, a...)   printk(KERN_INFO "%s: " f, (m->name) , ## a)
-
-struct adm5120_map_info {
-       struct map_info map;
-       void            (*switch_bank)(unsigned);
-       unsigned long   window_size;
-};
-
-struct adm5120_flash_info {
-       struct mtd_info         *mtd;
-       struct resource         *res;
-       struct platform_device  *dev;
-       struct adm5120_map_info amap;
-#ifdef CONFIG_MTD_PARTITIONS
-       int                     nr_parts;
-       struct mtd_partition    *parts[MAX_PARSED_PARTS];
-#endif
-};
-
-struct flash_desc {
-       u32     phys;
-       u32     srs_shift;
-};
-
-/*
- * Globals
- */
-static DEFINE_SPINLOCK(adm5120_flash_spin);
-#define FLASH_LOCK()   spin_lock(&adm5120_flash_spin)
-#define FLASH_UNLOCK() spin_unlock(&adm5120_flash_spin)
-
-static u32 flash_bankwidths[4] = { 1, 2, 4, 0 };
-
-static u32 flash_sizes[8] = {
-       0, 512*1024, 1024*1024, 2*1024*1024,
-       4*1024*1024, 0, 0, 0
-};
-
-static struct flash_desc flash_descs[2] = {
-       {
-               .phys           = ADM5120_SRAM0_BASE,
-               .srs_shift      = MEMCTRL_SRS0_SHIFT,
-       }, {
-               .phys           = ADM5120_SRAM1_BASE,
-               .srs_shift      = MEMCTRL_SRS1_SHIFT,
-       }
-};
-
-static const char *probe_types[] = {
-       "cfi_probe",
-       "jedec_probe",
-       "map_rom",
-       NULL
-};
-
-#ifdef CONFIG_MTD_PARTITIONS
-static const char *parse_types[] = {
-       "cmdlinepart",
-#ifdef CONFIG_MTD_REDBOOT_PARTS
-       "RedBoot",
-#endif
-#ifdef CONFIG_MTD_MYLOADER_PARTS
-       "MyLoader",
-#endif
-};
-#endif
-
-#define BANK_SIZE      (2<<20)
-#define BANK_SIZE_MAX  (4<<20)
-#define BANK_OFFS_MASK (BANK_SIZE-1)
-#define BANK_START_MASK        (~BANK_OFFS_MASK)
-
-static inline struct adm5120_map_info *map_to_amap(struct map_info *map)
-{
-       return (struct adm5120_map_info *)map;
-}
-
-static void adm5120_flash_switchbank(struct map_info *map,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       unsigned bank;
-
-       if (amap->switch_bank == NULL)
-               return;
-
-       bank = (ofs & BANK_START_MASK) >> 21;
-       if (bank > 1)
-               BUG();
-
-       MAP_DBG(map, "switching to bank %u, ofs=%lX\n", bank, ofs);
-       amap->switch_bank(bank);
-}
-
-static map_word adm5120_flash_read(struct map_info *map, unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       map_word ret;
-
-       MAP_DBG(map, "reading from ofs %lX\n", ofs);
-
-       if (ofs >= amap->window_size)
-               return map_word_ff(map);
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       ret = inline_map_read(map, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-
-       return ret;
-}
-
-static void adm5120_flash_write(struct map_info *map, const map_word datum,
-               unsigned long ofs)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-
-       MAP_DBG(map, "writing to ofs %lX\n", ofs);
-
-       if (ofs > amap->window_size)
-               return;
-
-       FLASH_LOCK();
-       adm5120_flash_switchbank(map, ofs);
-       inline_map_write(map, datum, (ofs & (amap->window_size-1)));
-       FLASH_UNLOCK();
-}
-
-static void adm5120_flash_copy_from(struct map_info *map, void *to,
-               unsigned long from, ssize_t len)
-{
-       struct adm5120_map_info *amap = map_to_amap(map);
-       char *p;
-       ssize_t t;
-
-       MAP_DBG(map, "copy_from, to=%lX, from=%lX, len=%lX\n",
-               (unsigned long)to, from, (unsigned long)len);
-
-       if (from > amap->window_size)
-               return;
-
-       p = (char *)to;
-       while (len > 0) {
-               t = len;
-               if ((from < BANK_SIZE) && ((from+len) > BANK_SIZE))
-                       t = BANK_SIZE-from;
-
-               FLASH_LOCK();
-               MAP_DBG(map, "copying %lu byte(s) from %lX to %lX\n",
-                       (unsigned long)t, (from & (amap->window_size-1)),
-                       (unsigned long)p);
-               adm5120_flash_switchbank(map, from);
-               inline_map_copy_from(map, p, (from & (amap->window_size-1)), t);
-               FLASH_UNLOCK();
-               p += t;
-               from += t;
-               len -= t;
-       }
-}
-
-static int adm5120_flash_initres(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-       int err = 0;
-
-       info->res = request_mem_region(map->phys, info->amap.window_size,
-                       map->name);
-       if (info->res == NULL) {
-               MAP_ERR(map, "could not reserve memory region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-       map->virt = ioremap_nocache(map->phys, info->amap.window_size);
-       if (map->virt == NULL) {
-               MAP_ERR(map, "failed to ioremap flash region\n");
-               err = -ENOMEM;
-               goto out;
-       }
-
-out:
-       return err;
-}
-
-static int adm5120_flash_initinfo(struct adm5120_flash_info *info,
-               struct platform_device *dev)
-{
-       struct map_info *map = &info->amap.map;
-       struct adm5120_flash_platform_data *pdata = dev->dev.platform_data;
-       struct flash_desc *fdesc;
-       u32 t = 0;
-
-       map->name = dev->dev.bus_id;
-
-       if (dev->id > 1) {
-               MAP_ERR(map, "invalid flash id\n");
-               goto err_out;
-       }
-
-       fdesc = &flash_descs[dev->id];
-
-       if (pdata)
-               info->amap.window_size = pdata->window_size;
-
-       if (info->amap.window_size == 0) {
-               /* get memory window size */
-               t = SW_READ_REG(SWITCH_REG_MEMCTRL) >> fdesc->srs_shift;
-               t &= MEMCTRL_SRS_MASK;
-               info->amap.window_size = flash_sizes[t];
-       }
-
-       if (info->amap.window_size == 0) {
-               MAP_ERR(map, "unable to determine window size\n");
-               goto err_out;
-       }
-
-       /* get flash bus width */
-       switch (dev->id) {
-       case 0:
-               t = MPMC_READ_REG(SC1) & SC_MW_MASK;
-               break;
-       case 1:
-               t = MPMC_READ_REG(SC0) & SC_MW_MASK;
-               break;
-       }
-       map->bankwidth = flash_bankwidths[t];
-       if (map->bankwidth == 0) {
-               MAP_ERR(map, "invalid bus width detected\n");
-               goto err_out;
-       }
-
-       map->phys = fdesc->phys;
-       map->size = BANK_SIZE_MAX;
-
-       simple_map_init(map);
-       map->read = adm5120_flash_read;
-       map->write = adm5120_flash_write;
-       map->copy_from = adm5120_flash_copy_from;
-
-       if (pdata) {
-               map->set_vpp = pdata->set_vpp;
-               info->amap.switch_bank = pdata->switch_bank;
-       }
-
-       info->dev = dev;
-
-       MAP_INFO(map, "probing at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys,
-               (unsigned long)info->amap.window_size >> 10,
-               map->bankwidth*8);
-
-       return 0;
-
-err_out:
-       return -ENODEV;
-}
-
-static void adm5120_flash_initbanks(struct adm5120_flash_info *info)
-{
-       struct map_info *map = &info->amap.map;
-
-       if (info->mtd->size <= BANK_SIZE)
-               /* no bank switching needed */
-               return;
-
-       if (info->amap.switch_bank) {
-               info->amap.window_size = info->mtd->size;
-               return;
-       }
-
-       MAP_ERR(map, "reduce visibility from %ldKiB to %ldKiB\n",
-               (unsigned long)map->size >> 10,
-               (unsigned long)info->mtd->size >> 10);
-
-       info->mtd->size = info->amap.window_size;
-}
-
-#ifdef CONFIG_MTD_PARTITIONS
-static int adm5120_flash_initparts(struct adm5120_flash_info *info)
-{
-       struct adm5120_flash_platform_data *pdata;
-       struct map_info *map = &info->amap.map;
-       int num_parsers;
-       const char *parser[2];
-       int err = 0;
-       int nr_parts;
-       int i;
-
-       info->nr_parts = 0;
-
-       pdata = info->dev->dev.platform_data;
-       if (pdata == NULL)
-               goto out;
-
-       if (pdata->nr_parts) {
-               MAP_INFO(map, "adding static partitions\n");
-               err = add_mtd_partitions(info->mtd, pdata->parts,
-                       pdata->nr_parts);
-               if (err == 0) {
-                       info->nr_parts += pdata->nr_parts;
-                       goto out;
-               }
-       }
-
-       num_parsers = ARRAY_SIZE(parse_types);
-       if (num_parsers > MAX_PARSED_PARTS)
-               num_parsers = MAX_PARSED_PARTS;
-
-       parser[1] = NULL;
-       for (i = 0; i < num_parsers; i++) {
-               parser[0] = parse_types[i];
-
-               MAP_INFO(map, "parsing \"%s\" partitions\n",
-                       parser[0]);
-               nr_parts = parse_mtd_partitions(info->mtd, parser,
-                       &info->parts[i], 0);
-
-               if (nr_parts <= 0)
-                       continue;
-
-               MAP_INFO(map, "adding \"%s\" partitions\n",
-                       parser[0]);
-
-               err = add_mtd_partitions(info->mtd, info->parts[i], nr_parts);
-               if (err)
-                       break;
-
-               info->nr_parts += nr_parts;
-       }
-out:
-       return err;
-}
-#else
-static int adm5120_flash_initparts(struct adm5120_flash_info *info)
-{
-       return 0;
-}
-#endif /* CONFIG_MTD_PARTITIONS */
-
-#ifdef CONFIG_MTD_PARTITIONS
-static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
-{
-       int i;
-
-       if (info->nr_parts) {
-               del_mtd_partitions(info->mtd);
-               for (i = 0; i < MAX_PARSED_PARTS; i++)
-                       if (info->parts[i] != NULL)
-                               kfree(info->parts[i]);
-       } else {
-               del_mtd_device(info->mtd);
-       }
-}
-#else
-static void adm5120_flash_remove_mtd(struct adm5120_flash_info *info)
-{
-       del_mtd_device(info->mtd);
-}
-#endif
-
-static int adm5120_flash_remove(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info;
-
-       info = platform_get_drvdata(dev);
-       if (info == NULL)
-               return 0;
-
-       platform_set_drvdata(dev, NULL);
-
-       if (info->mtd != NULL) {
-               adm5120_flash_remove_mtd(info);
-               map_destroy(info->mtd);
-       }
-
-       if (info->amap.map.virt != NULL)
-               iounmap(info->amap.map.virt);
-
-       if (info->res != NULL) {
-               release_resource(info->res);
-               kfree(info->res);
-       }
-
-       return 0;
-}
-
-static int adm5120_flash_probe(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info;
-       struct map_info *map;
-       const char **probe_type;
-       int err;
-
-       info = kzalloc(sizeof(*info), GFP_KERNEL);
-       if (info == NULL) {
-               err = -ENOMEM;
-               goto err_out;
-       }
-
-       platform_set_drvdata(dev, info);
-
-       err = adm5120_flash_initinfo(info, dev);
-       if (err)
-               goto err_out;
-
-       err = adm5120_flash_initres(info);
-       if (err)
-               goto err_out;
-
-       map = &info->amap.map;
-       for (probe_type = probe_types; info->mtd == NULL && *probe_type != NULL;
-               probe_type++)
-               info->mtd = do_map_probe(*probe_type, map);
-
-       if (info->mtd == NULL) {
-               MAP_ERR(map, "map_probe failed\n");
-               err = -ENXIO;
-               goto err_out;
-       }
-
-       adm5120_flash_initbanks(info);
-
-       if (info->mtd->size < info->amap.window_size) {
-               /* readjust resources */
-               iounmap(map->virt);
-               release_resource(info->res);
-               kfree(info->res);
-
-               info->amap.window_size = info->mtd->size;
-               map->size = info->mtd->size;
-               MAP_INFO(map, "reducing map size to %ldKiB\n",
-                       (unsigned long)map->size >> 10);
-               err = adm5120_flash_initres(info);
-               if (err)
-                       goto err_out;
-       }
-
-       MAP_INFO(map, "found at 0x%lX, size:%ldKiB, width:%d bits\n",
-               (unsigned long)map->phys, (unsigned long)info->mtd->size >> 10,
-               map->bankwidth*8);
-
-       info->mtd->owner = THIS_MODULE;
-
-       err = adm5120_flash_initparts(info);
-       if (err)
-               goto err_out;
-
-       if (info->nr_parts == 0) {
-               MAP_INFO(map, "no partitions available, registering "
-                       "whole flash\n");
-               add_mtd_device(info->mtd);
-       }
-
-       return 0;
-
-err_out:
-       adm5120_flash_remove(dev);
-       return err;
-}
-
-#ifdef CONFIG_PM
-static int adm5120_flash_suspend(struct platform_device *dev,
-               pm_message_t state)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-       int ret = 0;
-
-       if (info)
-               ret = info->mtd->suspend(info->mtd);
-
-       return ret;
-}
-
-static int adm5120_flash_resume(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info)
-               info->mtd->resume(info->mtd);
-
-       return 0;
-}
-
-static void adm5120_flash_shutdown(struct platform_device *dev)
-{
-       struct adm5120_flash_info *info = platform_get_drvdata(dev);
-
-       if (info && info->mtd->suspend(info->mtd) == 0)
-               info->mtd->resume(info->mtd);
-}
-#endif
-
-static struct platform_driver adm5120_flash_driver = {
-       .probe          = adm5120_flash_probe,
-       .remove         = adm5120_flash_remove,
-#ifdef CONFIG_PM
-       .suspend        = adm5120_flash_suspend,
-       .resume         = adm5120_flash_resume,
-       .shutdown       = adm5120_flash_shutdown,
-#endif
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-static int __init adm5120_flash_init(void)
-{
-       int err;
-
-       err = platform_driver_register(&adm5120_flash_driver);
-
-       return err;
-}
-
-static void __exit adm5120_flash_exit(void)
-{
-       platform_driver_unregister(&adm5120_flash_driver);
-}
-
-module_init(adm5120_flash_init);
-module_exit(adm5120_flash_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
diff --git a/target/linux/adm5120/files/drivers/mtd/myloader.c b/target/linux/adm5120/files/drivers/mtd/myloader.c
deleted file mode 100644 (file)
index 9dab9d1..0000000
+++ /dev/null
@@ -1,167 +0,0 @@
-/*
- *  $Id$
- *
- *  Parse MyLoader-style flash partition tables and produce a Linux partition
- *  array to match.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was based on drivers/mtd/redboot.c
- *  Author: Red Hat, Inc. - David Woodhouse <dwmw2@cambridge.redhat.com>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/init.h>
-#include <linux/vmalloc.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#include <prom/myloader.h>
-
-#define NAME_LEN_MAX           20
-#define NAME_MYLOADER          "MyLoader"
-#define NAME_PARTITION_TABLE   "Partition Table"
-#define BLOCK_LEN_MIN          0x10000
-
-int parse_myloader_partitions(struct mtd_info *master,
-                       struct mtd_partition **pparts,
-                       unsigned long origin)
-{
-       struct mylo_partition_table *tab;
-       struct mylo_partition *part;
-       struct mtd_partition *mtd_parts;
-       struct mtd_partition *mtd_part;
-       int num_parts;
-       int ret, i;
-       size_t retlen;
-       char *names;
-       unsigned long offset;
-       unsigned long blocklen;
-
-       tab = vmalloc(sizeof(*tab));
-       if (!tab) {
-               return -ENOMEM;
-               goto out;
-       }
-
-       blocklen = master->erasesize;
-       if (blocklen < BLOCK_LEN_MIN)
-               blocklen = BLOCK_LEN_MIN;
-
-       /* Partition Table is always located on the second erase block */
-       offset = blocklen;
-       printk(KERN_NOTICE "%s: searching for MyLoader partition table at "
-                       "offset 0x%lx\n", master->name, offset);
-
-       ret = master->read(master, offset, sizeof(*tab), &retlen, (void *)tab);
-       if (ret)
-               goto out;
-
-       if (retlen != sizeof(*tab)) {
-               ret = -EIO;
-               goto out_free_buf;
-       }
-
-       /* Check for Partition Table magic number */
-       if (tab->magic != le32_to_cpu(MYLO_MAGIC_PARTITIONS)) {
-               printk(KERN_NOTICE "%s: no MyLoader partition table found\n",
-                       master->name);
-               ret = 0;
-               goto out_free_buf;
-       }
-
-       /* The MyLoader and the Partition Table is always present */
-       num_parts = 2;
-
-       /* Detect number of used partitions */
-       for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-               part = &tab->partitions[i];
-
-               if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-                       continue;
-
-               num_parts++;
-       }
-
-       mtd_parts = kzalloc((num_parts * sizeof(*mtd_part) +
-                               num_parts * NAME_LEN_MAX), GFP_KERNEL);
-
-       if (!mtd_parts) {
-               ret = -ENOMEM;
-               goto out_free_buf;
-       }
-
-       mtd_part = mtd_parts;
-       names = (char *)&mtd_parts[num_parts];
-
-       strncpy(names, NAME_MYLOADER, NAME_LEN_MAX-1);
-       mtd_part->name = names;
-       mtd_part->offset = 0;
-       mtd_part->size = blocklen;
-       mtd_part->mask_flags = MTD_WRITEABLE;
-       mtd_part++;
-       names += NAME_LEN_MAX;
-
-       strncpy(names, NAME_PARTITION_TABLE, NAME_LEN_MAX-1);
-       mtd_part->name = names;
-       mtd_part->offset = blocklen;
-       mtd_part->size = blocklen;
-       mtd_part->mask_flags = MTD_WRITEABLE;
-       mtd_part++;
-       names += NAME_LEN_MAX;
-
-       for (i = 0; i < MYLO_MAX_PARTITIONS; i++) {
-               part = &tab->partitions[i];
-
-               if (le16_to_cpu(part->type) == PARTITION_TYPE_FREE)
-                       continue;
-
-               sprintf(names, "partition%d", i);
-               mtd_part->offset = le32_to_cpu(part->addr);
-               mtd_part->size = le32_to_cpu(part->size);
-               mtd_part->name = names;
-               mtd_part++;
-               names += NAME_LEN_MAX;
-       }
-
-       *pparts = mtd_parts;
-       ret = num_parts;
-
-out_free_buf:
-       vfree(tab);
-out:
-       return ret;
-}
-
-static struct mtd_part_parser mylo_mtd_parser = {
-       .owner = THIS_MODULE,
-       .parse_fn = parse_myloader_partitions,
-       .name = NAME_MYLOADER,
-};
-
-static int __init mylo_mtd_parser_init(void)
-{
-       return register_mtd_parser(&mylo_mtd_parser);
-}
-
-static void __exit mylo_mtd_parser_exit(void)
-{
-       deregister_mtd_parser(&mylo_mtd_parser);
-}
-
-module_init(mylo_mtd_parser_init);
-module_exit(mylo_mtd_parser_exit);
-
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION("Parsing code for MyLoader partition tables");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/mtd/trxsplit.c b/target/linux/adm5120/files/drivers/mtd/trxsplit.c
deleted file mode 100644 (file)
index 49eb0f9..0000000
+++ /dev/null
@@ -1,220 +0,0 @@
-/*
- *  $Id$
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/slab.h>
-#include <linux/list.h>
-#include <linux/kmod.h>
-#include <linux/root_dev.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-
-#include <linux/byteorder/generic.h>
-
-#define PFX    "trxsplit: "
-
-#define TRX_MAGIC      0x30524448      /* "HDR0" */
-#define TRX_VERSION    1
-#define TRX_MAX_LEN    0x3A0000
-#define TRX_NO_HEADER  0x1     /* do not write TRX header */
-#define TRX_GZ_FILES   0x2     /* contains individual gzip files */
-#define TRX_MAX_OFFSET 3
-#define TRX_MIN_KERNEL_SIZE    256*1024
-
-struct trx_header {
-       u32 magic;      /* "HDR0" */
-       u32 len;        /* Length of file including header */
-       u32 crc32;      /* 32-bit CRC from flag_version to end of file */
-       u32 flag_version; /* 0:15 flags, 16:31 version */
-       u32 offsets[TRX_MAX_OFFSET]; /* Offsets of partitions */
-};
-
-#define TRX_ALIGN      0x1000
-
-static int trx_nr_parts;
-static unsigned long trx_offset;
-static struct mtd_info *trx_mtd;
-static struct mtd_partition trx_parts[TRX_MAX_OFFSET];
-static struct trx_header trx_hdr;
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd);
-
-static int trxsplit_checktrx(struct mtd_info *mtd, unsigned long offset)
-{
-       size_t retlen;
-       int err;
-
-       err = mtd->read(mtd, offset, sizeof(trx_hdr), &retlen,
-                       (void *)&trx_hdr);
-       if (err) {
-               printk(KERN_ALERT PFX "unable to read from '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       if (retlen != sizeof(trx_hdr)) {
-               printk(KERN_ALERT PFX "reading failed on '%s'\n", mtd->name);
-               goto err_out;
-       }
-
-       trx_hdr.magic = le32_to_cpu(trx_hdr.magic);
-       trx_hdr.len = le32_to_cpu(trx_hdr.len);
-       trx_hdr.crc32 = le32_to_cpu(trx_hdr.crc32);
-       trx_hdr.flag_version = le32_to_cpu(trx_hdr.flag_version);
-       trx_hdr.offsets[0] = le32_to_cpu(trx_hdr.offsets[0]);
-       trx_hdr.offsets[1] = le32_to_cpu(trx_hdr.offsets[1]);
-       trx_hdr.offsets[2] = le32_to_cpu(trx_hdr.offsets[2]);
-
-       /* sanity checks */
-       if (trx_hdr.magic != TRX_MAGIC)
-               goto err_out;
-
-       if (trx_hdr.len > mtd->size - offset)
-               goto err_out;
-
-       /* TODO: add crc32 checking too? */
-
-       return 0;
-
-err_out:
-       return -1;
-}
-
-static void trxsplit_findtrx(struct mtd_info *mtd)
-{
-       unsigned long offset;
-       int err;
-
-       printk(KERN_INFO PFX "searching TRX header in '%s'\n", mtd->name);
-
-       err = 0;
-       for (offset = 0; offset < mtd->size; offset += TRX_ALIGN) {
-               err = trxsplit_checktrx(mtd, offset);
-               if (err == 0)
-                       break;
-       }
-
-       if (err)
-               return;
-
-       printk(KERN_INFO PFX "TRX header found at 0x%lX\n", offset);
-
-       trx_mtd = mtd;
-       trx_offset = offset;
-}
-
-static void trxsplit_create_partitions(struct mtd_info *mtd)
-{
-       struct mtd_partition *part = trx_parts;
-       int err;
-       int i;
-
-       for (i = 0; i < TRX_MAX_OFFSET; i++) {
-               part = &trx_parts[i];
-               if (trx_hdr.offsets[i] == 0)
-                       continue;
-               part->offset = trx_offset + trx_hdr.offsets[i];
-               trx_nr_parts++;
-       }
-
-       for (i = 0; i < trx_nr_parts-1; i++)
-               trx_parts[i].size = trx_parts[i+1].offset - trx_parts[i].offset;
-
-       trx_parts[i].size = mtd->size - trx_parts[i].offset;
-
-       i = 0;
-       part = &trx_parts[i];
-       if (part->size < TRX_MIN_KERNEL_SIZE) {
-               part->name = "loader";
-               i++;
-       }
-
-       part = &trx_parts[i];
-       part->name = "kernel";
-       i++;
-
-       part = &trx_parts[i];
-       part->name = "rootfs";
-
-       err = add_mtd_partitions(mtd, trx_parts, trx_nr_parts);
-       if (err) {
-               printk(KERN_ALERT PFX "adding TRX partitions failed\n");
-               return;
-       }
-
-       mtd->refresh_device = trxsplit_refresh_partitions;
-}
-
-static int trxsplit_refresh_partitions(struct mtd_info *mtd)
-{
-       printk(KERN_INFO PFX "refreshing TRX partitions in '%s' (%d,%d)\n",
-               mtd->name, MTD_BLOCK_MAJOR, mtd->index);
-
-       /* remove old partitions */
-       del_mtd_partitions(mtd);
-
-       trxsplit_findtrx(mtd);
-       if (!trx_mtd)
-               goto err;
-
-       trxsplit_create_partitions(trx_mtd);
-       return 1;
-
-err:
-       return 0;
-}
-
-static void __init trxsplit_add_mtd(struct mtd_info *mtd)
-{
-       if (mtd->type != MTD_NORFLASH) {
-               printk(KERN_INFO PFX "'%s' is not a NOR flash, skipped\n",
-                               mtd->name);
-               return;
-       }
-
-       if (!trx_mtd)
-               trxsplit_findtrx(mtd);
-}
-
-static void __init trxsplit_remove_mtd(struct mtd_info *mtd)
-{
-       /* nothing to do */
-}
-
-static struct mtd_notifier trxsplit_notifier __initdata = {
-       .add    = trxsplit_add_mtd,
-       .remove = trxsplit_remove_mtd,
-};
-
-static void __init trxsplit_scan(void)
-{
-       register_mtd_user(&trxsplit_notifier);
-       unregister_mtd_user(&trxsplit_notifier);
-}
-
-static int __init trxsplit_init(void)
-{
-       trxsplit_scan();
-
-       if (trx_mtd) {
-               printk(KERN_INFO PFX "creating TRX partitions in '%s' "
-                       "(%d,%d)\n", trx_mtd->name, MTD_BLOCK_MAJOR,
-                       trx_mtd->index);
-               trxsplit_create_partitions(trx_mtd);
-       }
-
-       return 0;
-}
-
-late_initcall(trxsplit_init);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
deleted file mode 100644 (file)
index 8f3610e..0000000
+++ /dev/null
@@ -1,1205 +0,0 @@
-/*
- *  ADM5120 built-in ethernet switch driver
- *
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
- *    Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *  NAPI extension for the Jeroen's driver
- *    Copyright Thomas Langer (Thomas.Langer@infineon.com), 2007
- *    Copyright Friedrich Beckmann (Friedrich.Beckmann@infineon.com), 2007
- *  Inspiration for the Jeroen's driver came from the ADMtek 2.4 driver.
- *    Copyright ADMtek Inc.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2  as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/errno.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/spinlock.h>
-#include <linux/platform_device.h>
-
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-
-#include <linux/io.h>
-#include <linux/irq.h>
-
-#include <asm/mipsregs.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-
-#include "adm5120sw.h"
-
-#define DRV_NAME       "adm5120-switch"
-#define DRV_DESC       "ADM5120 built-in ethernet switch driver"
-#define DRV_VERSION    "0.1.1"
-
-#define CONFIG_ADM5120_SWITCH_NAPI     1
-#undef CONFIG_ADM5120_SWITCH_DEBUG
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_DEBUG
-#define SW_DBG(f, a...)                printk(KERN_DBG "%s: " f, DRV_NAME , ## a)
-#else
-#define SW_DBG(f, a...)                do {} while (0)
-#endif
-#define SW_ERR(f, a...)                printk(KERN_ERR "%s: " f, DRV_NAME , ## a)
-#define SW_INFO(f, a...)       printk(KERN_INFO "%s: " f, DRV_NAME , ## a)
-
-#define SWITCH_NUM_PORTS       6
-#define ETH_CSUM_LEN           4
-
-#define RX_MAX_PKTLEN  1550
-#define RX_RING_SIZE   64
-
-#define TX_RING_SIZE   32
-#define TX_QUEUE_LEN   28      /* Limit ring entries actually used. */
-#define TX_TIMEOUT     HZ*400
-
-#define RX_DESCS_SIZE  (RX_RING_SIZE * sizeof(struct dma_desc *))
-#define RX_SKBS_SIZE   (RX_RING_SIZE * sizeof(struct sk_buff *))
-#define TX_DESCS_SIZE  (TX_RING_SIZE * sizeof(struct dma_desc *))
-#define TX_SKBS_SIZE   (TX_RING_SIZE * sizeof(struct sk_buff *))
-
-#define SKB_ALLOC_LEN          (RX_MAX_PKTLEN + 32)
-#define SKB_RESERVE_LEN                (NET_IP_ALIGN + NET_SKB_PAD)
-
-#define SWITCH_INTS_HIGH (SWITCH_INT_SHD | SWITCH_INT_RHD | SWITCH_INT_HDF)
-#define SWITCH_INTS_LOW (SWITCH_INT_SLD | SWITCH_INT_RLD | SWITCH_INT_LDF)
-#define SWITCH_INTS_ERR (SWITCH_INT_RDE | SWITCH_INT_SDE | SWITCH_INT_CPUH)
-#define SWITCH_INTS_Q (SWITCH_INT_P0QF | SWITCH_INT_P1QF | SWITCH_INT_P2QF | \
-                       SWITCH_INT_P3QF | SWITCH_INT_P4QF | SWITCH_INT_P5QF | \
-                       SWITCH_INT_CPQF | SWITCH_INT_GQF)
-
-#define SWITCH_INTS_ALL (SWITCH_INTS_HIGH | SWITCH_INTS_LOW | \
-                       SWITCH_INTS_ERR | SWITCH_INTS_Q | \
-                       SWITCH_INT_MD | SWITCH_INT_PSC)
-
-#define SWITCH_INTS_USED (SWITCH_INTS_LOW | SWITCH_INT_PSC)
-#define SWITCH_INTS_POLL (SWITCH_INT_RLD | SWITCH_INT_LDF | SWITCH_INT_SLD)
-
-/* ------------------------------------------------------------------------ */
-
-struct adm5120_if_priv {
-       struct net_device *dev;
-
-       unsigned int    vlan_no;
-       unsigned int    port_mask;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       struct napi_struct napi;
-#endif
-};
-
-struct dma_desc {
-       __u32                   buf1;
-#define DESC_OWN               (1UL << 31)     /* Owned by the switch */
-#define DESC_EOR               (1UL << 28)     /* End of Ring */
-#define DESC_ADDR_MASK         0x1FFFFFF
-#define DESC_ADDR(x)   ((__u32)(x) & DESC_ADDR_MASK)
-       __u32                   buf2;
-#define DESC_BUF2_EN           (1UL << 31)     /* Buffer 2 enable */
-       __u32                   buflen;
-       __u32                   misc;
-/* definitions for tx/rx descriptors */
-#define DESC_PKTLEN_SHIFT      16
-#define DESC_PKTLEN_MASK       0x7FF
-/* tx descriptor specific part */
-#define DESC_CSUM              (1UL << 31)     /* Append checksum */
-#define DESC_DSTPORT_SHIFT     8
-#define DESC_DSTPORT_MASK      0x3F
-#define DESC_VLAN_MASK         0x3F
-/* rx descriptor specific part */
-#define DESC_SRCPORT_SHIFT     12
-#define DESC_SRCPORT_MASK      0x7
-#define DESC_DA_MASK           0x3
-#define DESC_DA_SHIFT          4
-#define DESC_IPCSUM_FAIL       (1UL << 3)      /* IP checksum fail */
-#define DESC_VLAN_TAG          (1UL << 2)      /* VLAN tag present */
-#define DESC_TYPE_MASK         0x3             /* mask for Packet type */
-#define DESC_TYPE_IP           0x0             /* IP packet */
-#define DESC_TYPE_PPPoE                0x1             /* PPPoE packet */
-} __attribute__ ((aligned(16)));
-
-/* ------------------------------------------------------------------------ */
-
-static int adm5120_nrdevs;
-
-static struct net_device *adm5120_devs[SWITCH_NUM_PORTS];
-/* Lookup table port -> device */
-static struct net_device *adm5120_port[SWITCH_NUM_PORTS];
-
-static struct dma_desc *txl_descs;
-static struct dma_desc *rxl_descs;
-
-static dma_addr_t txl_descs_dma;
-static dma_addr_t rxl_descs_dma;
-
-static struct sk_buff **txl_skbuff;
-static struct sk_buff **rxl_skbuff;
-
-static unsigned int cur_rxl, dirty_rxl; /* producer/consumer ring indices */
-static unsigned int cur_txl, dirty_txl;
-
-static unsigned int sw_used;
-
-static spinlock_t tx_lock = SPIN_LOCK_UNLOCKED;
-
-/* ------------------------------------------------------------------------ */
-
-static inline u32 sw_read_reg(u32 reg)
-{
-       return __raw_readl((void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_write_reg(u32 reg, u32 val)
-{
-       __raw_writel(val, (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE)+reg);
-}
-
-static inline void sw_int_mask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t |= mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_unmask(u32 mask)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       t &= ~mask;
-       sw_write_reg(SWITCH_REG_INT_MASK, t);
-}
-
-static inline void sw_int_ack(u32 mask)
-{
-       sw_write_reg(SWITCH_REG_INT_STATUS, mask);
-}
-
-static inline u32 sw_int_status(void)
-{
-       u32     t;
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       t &= ~sw_read_reg(SWITCH_REG_INT_MASK);
-       return t;
-}
-
-static inline u32 desc_get_srcport(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK;
-}
-
-static inline u32 desc_get_pktlen(struct dma_desc *desc)
-{
-       return (desc->misc >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK;
-}
-
-static inline int desc_ipcsum_fail(struct dma_desc *desc)
-{
-       return ((desc->misc & DESC_IPCSUM_FAIL) != 0);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void sw_dump_desc(char *label, struct dma_desc *desc, int tx)
-{
-       u32 t;
-
-       SW_DBG("%s %s desc/%p\n", label, tx ? "tx" : "rx", desc);
-
-       t = desc->buf1;
-       SW_DBG("    buf1 %08X addr=%08X; len=%08X %s%s\n", t,
-               t & DESC_ADDR_MASK,
-               desc->buflen,
-               (t & DESC_OWN) ? "SWITCH" : "CPU",
-               (t & DESC_EOR) ? " RE" : "");
-
-       t = desc->buf2;
-       SW_DBG("    buf2 %08X addr=%08X%s\n", desc->buf2,
-               t & DESC_ADDR_MASK,
-               (t & DESC_BUF2_EN) ? " EN" : "" );
-
-       t = desc->misc;
-       if (tx)
-               SW_DBG("    misc %08X%s pktlen=%04X ports=%02X vlan=%02X\n", t,
-                       (t & DESC_CSUM) ? " CSUM" : "",
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_DSTPORT_SHIFT) & DESC_DSTPORT_MASK,
-                       t & DESC_VLAN_MASK);
-       else
-               SW_DBG("    misc %08X pktlen=%04X port=%d DA=%d%s%s type=%d\n",
-                       t,
-                       (t >> DESC_PKTLEN_SHIFT) & DESC_PKTLEN_MASK,
-                       (t >> DESC_SRCPORT_SHIFT) & DESC_SRCPORT_MASK,
-                       (t >> DESC_DA_SHIFT) & DESC_DA_MASK,
-                       (t & DESC_IPCSUM_FAIL) ? " IPCF" : "",
-                       (t & DESC_VLAN_TAG) ? " VLAN" : "",
-                       (t & DESC_TYPE_MASK));
-}
-
-static void sw_dump_intr_mask(char *label, u32 mask)
-{
-       SW_DBG("%s %08X%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label, mask,
-               (mask & SWITCH_INT_SHD) ? " SHD" : "",
-               (mask & SWITCH_INT_SLD) ? " SLD" : "",
-               (mask & SWITCH_INT_RHD) ? " RHD" : "",
-               (mask & SWITCH_INT_RLD) ? " RLD" : "",
-               (mask & SWITCH_INT_HDF) ? " HDF" : "",
-               (mask & SWITCH_INT_LDF) ? " LDF" : "",
-               (mask & SWITCH_INT_P0QF) ? " P0QF" : "",
-               (mask & SWITCH_INT_P1QF) ? " P1QF" : "",
-               (mask & SWITCH_INT_P2QF) ? " P2QF" : "",
-               (mask & SWITCH_INT_P3QF) ? " P3QF" : "",
-               (mask & SWITCH_INT_P4QF) ? " P4QF" : "",
-               (mask & SWITCH_INT_CPQF) ? " CPQF" : "",
-               (mask & SWITCH_INT_GQF) ? " GQF" : "",
-               (mask & SWITCH_INT_MD) ? " MD" : "",
-               (mask & SWITCH_INT_BCS) ? " BCS" : "",
-               (mask & SWITCH_INT_PSC) ? " PSC" : "",
-               (mask & SWITCH_INT_ID) ? " ID" : "",
-               (mask & SWITCH_INT_W0TE) ? " W0TE" : "",
-               (mask & SWITCH_INT_W1TE) ? " W1TE" : "",
-               (mask & SWITCH_INT_RDE) ? " RDE" : "",
-               (mask & SWITCH_INT_SDE) ? " SDE" : "",
-               (mask & SWITCH_INT_CPUH) ? " CPUH" : "");
-}
-
-static void sw_dump_regs(void)
-{
-       u32 t;
-
-       t = sw_read_reg(SWITCH_REG_PHY_STATUS);
-       SW_DBG("phy_status: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       SW_DBG("cpup_conf: %08X%s%s%s\n", t,
-               (t & CPUP_CONF_DCPUP) ? " DCPUP" : "",
-               (t & CPUP_CONF_CRCP) ? " CRCP" : "",
-               (t & CPUP_CONF_BTM) ? " BTM" : "");
-
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       SW_DBG("port_conf0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF1);
-       SW_DBG("port_conf1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PORT_CONF2);
-       SW_DBG("port_conf2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_VLAN_G1);
-       SW_DBG("vlan g1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_VLAN_G2);
-       SW_DBG("vlan g2: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_BW_CNTL0);
-       SW_DBG("bw_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_BW_CNTL1);
-       SW_DBG("bw_cntl1: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL0);
-       SW_DBG("phy_cntl0: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL1);
-       SW_DBG("phy_cntl1: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL2);
-       SW_DBG("phy_cntl2: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       SW_DBG("phy_cntl3: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL4);
-       SW_DBG("phy_cntl4: %08X\n", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_STATUS);
-       sw_dump_intr_mask("int_status: ", t);
-
-       t = sw_read_reg(SWITCH_REG_INT_MASK);
-       sw_dump_intr_mask("int_mask: ", t);
-
-       t = sw_read_reg(SWITCH_REG_SHDA);
-       SW_DBG("shda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_SLDA);
-       SW_DBG("slda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RHDA);
-       SW_DBG("rhda: %08X\n", t);
-       t = sw_read_reg(SWITCH_REG_RLDA);
-       SW_DBG("rlda: %08X\n", t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-static inline void adm5120_rx_dma_update(struct dma_desc *desc,
-       struct sk_buff *skb, int end)
-{
-       desc->misc = 0;
-       desc->buf2 = 0;
-       desc->buflen = RX_MAX_PKTLEN;
-       desc->buf1 = DESC_ADDR(skb->data) |
-               DESC_OWN | (end ? DESC_EOR : 0);
-}
-
-static void adm5120_switch_rx_refill(void)
-{
-       unsigned int entry;
-
-       for (; cur_rxl - dirty_rxl > 0; dirty_rxl++) {
-               struct dma_desc *desc;
-               struct sk_buff *skb;
-
-               entry = dirty_rxl % RX_RING_SIZE;
-               desc = &rxl_descs[entry];
-
-               skb = rxl_skbuff[entry];
-               if (skb == NULL) {
-                       skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-                       if (skb) {
-                               skb_reserve(skb, SKB_RESERVE_LEN);
-                               rxl_skbuff[entry] = skb;
-                       } else {
-                               SW_ERR("no memory for skb\n");
-                               desc->buflen = 0;
-                               desc->buf2 = 0;
-                               desc->misc = 0;
-                               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN;
-                               break;
-                       }
-               }
-
-               desc->buf2 = 0;
-               desc->buflen = RX_MAX_PKTLEN;
-               desc->misc = 0;
-               desc->buf1 = (desc->buf1 & DESC_EOR) | DESC_OWN |
-                               DESC_ADDR(skb->data);
-       }
-}
-
-static int adm5120_switch_rx(int limit)
-{
-       unsigned int done = 0;
-
-       SW_DBG("rx start, limit=%d, cur_rxl=%u, dirty_rxl=%u\n",
-                               limit, cur_rxl, dirty_rxl);
-
-       while (done < limit) {
-               int entry = cur_rxl % RX_RING_SIZE;
-               struct dma_desc *desc = &rxl_descs[entry];
-               struct net_device *rdev;
-               unsigned int port;
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (dirty_rxl + RX_RING_SIZE == cur_rxl)
-                       break;
-
-               port = desc_get_srcport(desc);
-               rdev = adm5120_port[port];
-
-               SW_DBG("rx descriptor %u, desc=%p, skb=%p\n", entry, desc,
-                               rxl_skbuff[entry]);
-
-               if ((rdev) && netif_running(rdev)) {
-                       struct sk_buff *skb = rxl_skbuff[entry];
-                       int pktlen;
-
-                       pktlen = desc_get_pktlen(desc);
-                       pktlen -= ETH_CSUM_LEN;
-
-                       if ((pktlen == 0) || desc_ipcsum_fail(desc)) {
-                               rdev->stats.rx_errors++;
-                               if (pktlen == 0)
-                                       rdev->stats.rx_length_errors++;
-                               if (desc_ipcsum_fail(desc))
-                                       rdev->stats.rx_crc_errors++;
-                               SW_DBG("rx error, recycling skb %u\n", entry);
-                       } else {
-                               skb_put(skb, pktlen);
-
-                               skb->dev = rdev;
-                               skb->protocol = eth_type_trans(skb, rdev);
-                               skb->ip_summed = CHECKSUM_UNNECESSARY;
-
-                               dma_cache_wback_inv((unsigned long)skb->data,
-                                       skb->len);
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-                               netif_receive_skb(skb);
-#else
-                               netif_rx(skb);
-#endif
-
-                               rdev->last_rx = jiffies;
-                               rdev->stats.rx_packets++;
-                               rdev->stats.rx_bytes += pktlen;
-
-                               rxl_skbuff[entry] = NULL;
-                               done++;
-                       }
-               } else {
-                       SW_DBG("no rx device, recycling skb %u\n", entry);
-               }
-
-               cur_rxl++;
-               if (cur_rxl - dirty_rxl > RX_RING_SIZE / 4)
-                       adm5120_switch_rx_refill();
-       }
-
-       adm5120_switch_rx_refill();
-
-       SW_DBG("rx finished, cur_rxl=%u, dirty_rxl=%u, processed %d\n",
-                               cur_rxl, dirty_rxl, done);
-
-       return done;
-}
-
-static void adm5120_switch_tx(void)
-{
-       unsigned int entry;
-
-       spin_lock(&tx_lock);
-       entry = dirty_txl % TX_RING_SIZE;
-       while (dirty_txl != cur_txl) {
-               struct dma_desc *desc = &txl_descs[entry];
-               struct sk_buff *skb = txl_skbuff[entry];
-
-               if (desc->buf1 & DESC_OWN)
-                       break;
-
-               if (netif_running(skb->dev)) {
-                       skb->dev->stats.tx_bytes += skb->len;
-                       skb->dev->stats.tx_packets++;
-               }
-
-               dev_kfree_skb_irq(skb);
-               txl_skbuff[entry] = NULL;
-               entry = (++dirty_txl) % TX_RING_SIZE;
-       }
-
-       if ((cur_txl - dirty_txl) < TX_QUEUE_LEN - 4) {
-               int i;
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_wake_queue(adm5120_devs[i]);
-               }
-       }
-       spin_unlock(&tx_lock);
-}
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static int adm5120_if_poll(struct napi_struct *napi, int limit)
-{
-       struct adm5120_if_priv *priv = container_of(napi,
-                               struct adm5120_if_priv, napi);
-       struct net_device *dev = priv->dev;
-       int done;
-       u32 status;
-
-       sw_int_ack(SWITCH_INTS_POLL);
-
-       SW_DBG("%s: processing TX ring\n", dev->name);
-       adm5120_switch_tx();
-
-       SW_DBG("%s: processing RX ring\n", dev->name);
-       done = adm5120_switch_rx(limit);
-
-       status = sw_int_status() & SWITCH_INTS_POLL;
-       if ((done < limit) && (!status)) {
-               SW_DBG("disable polling mode for %s\n", dev->name);
-               netif_rx_complete(dev, napi);
-               sw_int_unmask(SWITCH_INTS_POLL);
-               return 0;
-       }
-
-       SW_DBG("%s still in polling mode, done=%d, status=%x\n",
-                       dev->name, done, status);
-       return 1;
-}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-
-static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
-{
-       u32 status;
-
-       status = sw_int_status();
-       status &= SWITCH_INTS_ALL;
-       if (!status)
-               return IRQ_NONE;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       sw_int_ack(status & ~SWITCH_INTS_POLL);
-
-       if (status & SWITCH_INTS_POLL) {
-               struct net_device *dev = dev_id;
-               struct adm5120_if_priv *priv = netdev_priv(dev);
-
-               sw_dump_intr_mask("poll ints", status);
-               SW_DBG("enable polling mode for %s\n", dev->name);
-               sw_int_mask(SWITCH_INTS_POLL);
-               netif_rx_schedule(dev, &priv->napi);
-       }
-#else
-       sw_int_ack(status);
-
-       if (status & (SWITCH_INT_RLD | SWITCH_INT_LDF)) {
-               adm5120_switch_rx(RX_RING_SIZE);
-       }
-
-       if (status & SWITCH_INT_SLD) {
-               adm5120_switch_tx();
-       }
-#endif
-
-       return IRQ_HANDLED;
-}
-
-static void adm5120_set_bw(char *matrix)
-{
-       unsigned long val;
-
-       /* Port 0 to 3 are set using the bandwidth control 0 register */
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_BW_CNTL0, val);
-
-       /* Port 4 and 5 are set using the bandwidth control 1 register */
-       val = matrix[4];
-       if (matrix[5] == 1)
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val | 0x80000000);
-       else
-               sw_write_reg(SWITCH_REG_BW_CNTL1, val & ~0x8000000);
-
-       SW_DBG("D: ctl0 0x%ux, ctl1 0x%ux\n", sw_read_reg(SWITCH_REG_BW_CNTL0),
-               sw_read_reg(SWITCH_REG_BW_CNTL1));
-}
-
-static void adm5120_switch_tx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       memset(desc, 0, num * sizeof(*desc));
-       desc[num-1].buf1 |= DESC_EOR;
-       memset(skbl, 0, sizeof(struct skb*)*num);
-
-       cur_txl = 0;
-       dirty_txl = 0;
-}
-
-static void adm5120_switch_rx_ring_reset(struct dma_desc *desc,
-               struct sk_buff **skbl, int num)
-{
-       int i;
-
-       memset(desc, 0, num * sizeof(*desc));
-       for (i = 0; i < num; i++) {
-               skbl[i] = dev_alloc_skb(SKB_ALLOC_LEN);
-               if (!skbl[i]) {
-                       i = num;
-                       break;
-               }
-               skb_reserve(skbl[i], SKB_RESERVE_LEN);
-               adm5120_rx_dma_update(&desc[i], skbl[i], (num-1==i));
-       }
-
-       cur_rxl = 0;
-       dirty_rxl = 0;
-}
-
-static int adm5120_switch_tx_ring_alloc(void)
-{
-       int err;
-
-       txl_descs = dma_alloc_coherent(NULL, TX_DESCS_SIZE, &txl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!txl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       txl_skbuff = kzalloc(TX_SKBS_SIZE, GFP_KERNEL);
-       if (!txl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_tx_ring_free(void)
-{
-       int i;
-
-       if (txl_skbuff) {
-               for (i = 0; i < TX_RING_SIZE; i++)
-                       if (txl_skbuff[i])
-                               kfree_skb(txl_skbuff[i]);
-               kfree(txl_skbuff);
-       }
-
-       if (txl_descs)
-               dma_free_coherent(NULL, TX_DESCS_SIZE, txl_descs,
-                       txl_descs_dma);
-}
-
-static int adm5120_switch_rx_ring_alloc(void)
-{
-       int err;
-       int i;
-
-       /* init RX ring */
-       rxl_descs = dma_alloc_coherent(NULL, RX_DESCS_SIZE, &rxl_descs_dma,
-                                       GFP_ATOMIC);
-       if (!rxl_descs) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       rxl_skbuff = kzalloc(RX_SKBS_SIZE, GFP_KERNEL);
-       if (!rxl_skbuff) {
-               err = -ENOMEM;
-               goto err;
-       }
-
-       for (i = 0; i < RX_RING_SIZE; i++) {
-               struct sk_buff *skb;
-               skb = alloc_skb(SKB_ALLOC_LEN, GFP_ATOMIC);
-               if (!skb) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-               rxl_skbuff[i] = skb;
-               skb_reserve(skb, SKB_RESERVE_LEN);
-       }
-
-       return 0;
-
-err:
-       return err;
-}
-
-static void adm5120_switch_rx_ring_free(void)
-{
-       int i;
-
-       if (rxl_skbuff) {
-               for (i = 0; i < RX_RING_SIZE; i++)
-                       if (rxl_skbuff[i])
-                               kfree_skb(rxl_skbuff[i]);
-               kfree(rxl_skbuff);
-       }
-
-       if (rxl_descs)
-               dma_free_coherent(NULL, RX_DESCS_SIZE, rxl_descs,
-                       rxl_descs_dma);
-}
-
-static void adm5120_write_mac(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned char *mac = dev->dev_addr;
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT) |
-               (mac[4] << MAC_WT1_MAC4_SHIFT) | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (priv->vlan_no<<3);
-
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       while (!(sw_read_reg(SWITCH_REG_MAC_WT0) & MAC_WT0_MWD));
-}
-
-static void adm5120_set_vlan(char *matrix)
-{
-       unsigned long val;
-       int vlan_port, port;
-
-       val = matrix[0] + (matrix[1]<<8) + (matrix[2]<<16) + (matrix[3]<<24);
-       sw_write_reg(SWITCH_REG_VLAN_G1, val);
-       val = matrix[4] + (matrix[5]<<8);
-       sw_write_reg(SWITCH_REG_VLAN_G2, val);
-
-       /* Now set/update the port vs. device lookup table */
-       for (port=0; port<SWITCH_NUM_PORTS; port++) {
-               for (vlan_port=0; vlan_port<SWITCH_NUM_PORTS && !(matrix[vlan_port] & (0x00000001 << port)); vlan_port++);
-               if (vlan_port <SWITCH_NUM_PORTS)
-                       adm5120_port[port] = adm5120_devs[vlan_port];
-               else
-                       adm5120_port[port] = NULL;
-       }
-}
-
-static void adm5120_switch_set_vlan_mac(unsigned int vlan, unsigned char *mac)
-{
-       u32 t;
-
-       t = mac[2] | (mac[3] << MAC_WT1_MAC3_SHIFT)
-               | (mac[4] << MAC_WT1_MAC4_SHIFT)
-               | (mac[5] << MAC_WT1_MAC5_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT1, t);
-
-       t = (mac[0] << MAC_WT0_MAC0_SHIFT) | (mac[1] << MAC_WT0_MAC1_SHIFT) |
-               MAC_WT0_MAWC | MAC_WT0_WVE | (vlan << MAC_WT0_WVN_SHIFT) |
-               (MAC_WT0_WAF_STATIC << MAC_WT0_WAF_SHIFT);
-       sw_write_reg(SWITCH_REG_MAC_WT0, t);
-
-       do {
-               t = sw_read_reg(SWITCH_REG_MAC_WT0);
-       } while ((t & MAC_WT0_MWD) == 0);
-}
-
-static void adm5120_switch_set_vlan_ports(unsigned int vlan, u32 ports)
-{
-       unsigned int reg;
-       u32 t;
-
-       if (vlan < 4)
-               reg = SWITCH_REG_VLAN_G1;
-       else {
-               vlan -= 4;
-               reg = SWITCH_REG_VLAN_G2;
-       }
-
-       t = sw_read_reg(reg);
-       t &= ~(0xFF << (vlan*8));
-       t |= (ports << (vlan*8));
-       sw_write_reg(reg, t);
-}
-
-/* ------------------------------------------------------------------------ */
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-static inline void adm5120_if_napi_enable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_enable(&priv->napi);
-}
-
-static inline void adm5120_if_napi_disable(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       napi_disable(&priv->napi);
-}
-#else
-static inline void adm5120_if_napi_enable(struct net_device *dev) {}
-static inline void adm5120_if_napi_disable(struct net_device *dev) {}
-#endif /* CONFIG_ADM5120_SWITCH_NAPI */
-
-static int adm5120_if_open(struct net_device *dev)
-{
-       u32 t;
-       int err;
-       int i;
-
-       adm5120_if_napi_enable(dev);
-
-       err = request_irq(dev->irq, adm5120_switch_irq,
-               (IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
-       if (err) {
-               SW_ERR("unable to get irq for %s\n", dev->name);
-               goto err;
-       }
-
-       if (!sw_used++)
-               /* enable interrupts on first open */
-               sw_int_unmask(SWITCH_INTS_USED);
-
-       /* enable (additional) port */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if (dev == adm5120_devs[i])
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       netif_start_queue(dev);
-
-       return 0;
-
-err:
-       adm5120_if_napi_disable(dev);
-       return err;
-}
-
-static int adm5120_if_stop(struct net_device *dev)
-{
-       u32 t;
-       int i;
-
-       netif_stop_queue(dev);
-       adm5120_if_napi_disable(dev);
-
-       /* disable port if not assigned to other devices */
-       t = sw_read_reg(SWITCH_REG_PORT_CONF0);
-       t |= SWITCH_PORTS_NOCPU;
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               if ((dev != adm5120_devs[i]) && netif_running(adm5120_devs[i]))
-                       t &= ~adm5120_eth_vlans[i];
-       }
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       if (!--sw_used)
-               sw_int_mask(SWITCH_INTS_USED);
-
-       free_irq(dev->irq, dev);
-
-       return 0;
-}
-
-static int adm5120_if_hard_start_xmit(struct sk_buff *skb,
-               struct net_device *dev)
-{
-       struct dma_desc *desc;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       unsigned int entry;
-       unsigned long data;
-       int i;
-
-       /* lock switch irq */
-       spin_lock_irq(&tx_lock);
-
-       /* calculate the next TX descriptor entry. */
-       entry = cur_txl % TX_RING_SIZE;
-
-       desc = &txl_descs[entry];
-       if (desc->buf1 & DESC_OWN) {
-               /* We want to write a packet but the TX queue is still
-                * occupied by the DMA. We are faster than the DMA... */
-               SW_DBG("%s unable to transmit, packet dopped\n", dev->name);
-               dev_kfree_skb(skb);
-               dev->stats.tx_dropped++;
-               return 0;
-       }
-
-       txl_skbuff[entry] = skb;
-       data = (desc->buf1 & DESC_EOR);
-       data |= DESC_ADDR(skb->data);
-
-       desc->misc =
-           ((skb->len<ETH_ZLEN?ETH_ZLEN:skb->len) << DESC_PKTLEN_SHIFT) |
-           (0x1 << priv->vlan_no);
-
-       desc->buflen = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
-
-       desc->buf1 = data | DESC_OWN;
-       sw_write_reg(SWITCH_REG_SEND_TRIG, SEND_TRIG_STL);
-
-       cur_txl++;
-       if (cur_txl == dirty_txl + TX_QUEUE_LEN) {
-               for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-                       if (!adm5120_devs[i])
-                               continue;
-                       netif_stop_queue(adm5120_devs[i]);
-               }
-       }
-
-       dev->trans_start = jiffies;
-
-       spin_unlock_irq(&tx_lock);
-
-       return 0;
-}
-
-static void adm5120_if_tx_timeout(struct net_device *dev)
-{
-       SW_INFO("TX timeout on %s\n",dev->name);
-}
-
-static void adm5120_if_set_multicast_list(struct net_device *dev)
-{
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-       u32 ports;
-       u32 t;
-
-       ports = adm5120_eth_vlans[priv->vlan_no] & SWITCH_PORTS_NOCPU;
-
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       if (dev->flags & IFF_PROMISC)
-               /* enable unknown packets */
-               t &= ~(ports << CPUP_CONF_DUNP_SHIFT);
-       else
-               /* disable unknown packets */
-               t |= (ports << CPUP_CONF_DUNP_SHIFT);
-
-       if (dev->flags & IFF_PROMISC || dev->flags & IFF_ALLMULTI ||
-                                       dev->mc_count)
-               /* enable multicast packets */
-               t &= ~(ports << CPUP_CONF_DMCP_SHIFT);
-       else
-               /* disable multicast packets */
-               t |= (ports << CPUP_CONF_DMCP_SHIFT);
-
-       /* If there is any port configured to be in promiscuous mode, then the */
-       /* Bridge Test Mode has to be activated. This will result in           */
-       /* transporting also packets learned in another VLAN to be forwarded   */
-       /* to the CPU.                                                         */
-       /* The difficult scenario is when we want to build a bridge on the CPU.*/
-       /* Assume we have port0 and the CPU port in VLAN0 and port1 and the    */
-       /* CPU port in VLAN1. Now we build a bridge on the CPU between         */
-       /* VLAN0 and VLAN1. Both ports of the VLANs are set in promisc mode.   */
-       /* Now assume a packet with ethernet source address 99 enters port 0   */
-       /* It will be forwarded to the CPU because it is unknown. Then the     */
-       /* bridge in the CPU will send it to VLAN1 and it goes out at port 1.  */
-       /* When now a packet with ethernet destination address 99 comes in at  */
-       /* port 1 in VLAN1, then the switch has learned that this address is   */
-       /* located at port 0 in VLAN0. Therefore the switch will drop          */
-       /* this packet. In order to avoid this and to send the packet still    */
-       /* to the CPU, the Bridge Test Mode has to be activated.               */
-
-       /* Check if there is any vlan in promisc mode. */
-       if (t & (SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT))
-               t &= ~CPUP_CONF_BTM; /* Disable Bridge Testing Mode */
-       else
-               t |= CPUP_CONF_BTM;  /* Enable Bridge Testing Mode */
-
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-}
-
-static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
-{
-       struct sockaddr *addr = p;
-
-       memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
-       adm5120_write_mac(dev);
-       return 0;
-}
-
-static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
-               int cmd)
-{
-       int err;
-       struct adm5120_sw_info info;
-       struct adm5120_if_priv *priv = netdev_priv(dev);
-
-       switch(cmd) {
-       case SIOCGADMINFO:
-               info.magic = 0x5120;
-               info.ports = adm5120_nrdevs;
-               info.vlan = priv->vlan_no;
-               err = copy_to_user(rq->ifr_data, &info, sizeof(info));
-               if (err)
-                       return -EFAULT;
-               break;
-       case SIOCSMATRIX:
-               if (!capable(CAP_NET_ADMIN))
-                       return -EPERM;
-               err = copy_from_user(adm5120_eth_vlans, rq->ifr_data,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               adm5120_set_vlan(adm5120_eth_vlans);
-               break;
-       case SIOCGMATRIX:
-               err = copy_to_user(rq->ifr_data, adm5120_eth_vlans,
-                                       sizeof(adm5120_eth_vlans));
-               if (err)
-                       return -EFAULT;
-               break;
-       default:
-               return -EOPNOTSUPP;
-       }
-       return 0;
-}
-
-static struct net_device *adm5120_if_alloc(void)
-{
-       struct net_device *dev;
-       struct adm5120_if_priv *priv;
-
-       dev = alloc_etherdev(sizeof(*priv));
-       if (!dev)
-               return NULL;
-
-       priv = netdev_priv(dev);
-       priv->dev = dev;
-
-       dev->irq                = ADM5120_IRQ_SWITCH;
-       dev->open               = adm5120_if_open;
-       dev->hard_start_xmit    = adm5120_if_hard_start_xmit;
-       dev->stop               = adm5120_if_stop;
-       dev->set_multicast_list = adm5120_if_set_multicast_list;
-       dev->do_ioctl           = adm5120_if_do_ioctl;
-       dev->tx_timeout         = adm5120_if_tx_timeout;
-       dev->watchdog_timeo     = TX_TIMEOUT;
-       dev->set_mac_address    = adm5120_if_set_mac_address;
-
-#ifdef CONFIG_ADM5120_SWITCH_NAPI
-       netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
-#endif
-
-       return dev;
-}
-
-/* ------------------------------------------------------------------------ */
-
-static void adm5120_switch_cleanup(void)
-{
-       int i;
-
-       /* disable interrupts */
-       sw_int_mask(SWITCH_INTS_ALL);
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev = adm5120_devs[i];
-               if (dev) {
-                       unregister_netdev(dev);
-                       free_netdev(dev);
-               }
-       }
-
-       adm5120_switch_tx_ring_free();
-       adm5120_switch_rx_ring_free();
-}
-
-static int __init adm5120_switch_probe(struct platform_device *pdev)
-{
-       u32 t;
-       int i, err;
-
-       adm5120_nrdevs = adm5120_eth_num_ports;
-
-       t = CPUP_CONF_DCPUP | CPUP_CONF_CRCP |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DUNP_SHIFT |
-               SWITCH_PORTS_NOCPU << CPUP_CONF_DMCP_SHIFT ;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       t = (SWITCH_PORTS_NOCPU << PORT_CONF0_EMCP_SHIFT) |
-               (SWITCH_PORTS_NOCPU << PORT_CONF0_BP_SHIFT) |
-               (SWITCH_PORTS_NOCPU);
-       sw_write_reg(SWITCH_REG_PORT_CONF0, t);
-
-       /* setup ports to Autoneg/100M/Full duplex/Auto MDIX */
-       t =  SWITCH_PORTS_PHY |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_SC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_DC_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_PHYR_SHIFT) |
-               (SWITCH_PORTS_PHY << PHY_CNTL2_AMDIX_SHIFT) |
-               PHY_CNTL2_RMAE;
-       sw_write_reg(SWITCH_REG_PHY_CNTL2, t);
-
-       t = sw_read_reg(SWITCH_REG_PHY_CNTL3);
-       t |= PHY_CNTL3_RNT;
-       sw_write_reg(SWITCH_REG_PHY_CNTL3, t);
-
-       /* Force all the packets from all ports are low priority */
-       sw_write_reg(SWITCH_REG_PRI_CNTL, 0);
-
-       sw_int_mask(SWITCH_INTS_ALL);
-       sw_int_ack(SWITCH_INTS_ALL);
-
-       err = adm5120_switch_rx_ring_alloc();
-       if (err)
-               goto err;
-
-       err = adm5120_switch_tx_ring_alloc();
-       if (err)
-               goto err;
-
-       adm5120_switch_tx_ring_reset(txl_descs, txl_skbuff, TX_RING_SIZE);
-       adm5120_switch_rx_ring_reset(rxl_descs, rxl_skbuff, RX_RING_SIZE);
-
-       sw_write_reg(SWITCH_REG_SHDA, 0);
-       sw_write_reg(SWITCH_REG_SLDA, KSEG1ADDR(txl_descs));
-       sw_write_reg(SWITCH_REG_RHDA, 0);
-       sw_write_reg(SWITCH_REG_RLDA, KSEG1ADDR(rxl_descs));
-
-       for (i = 0; i < SWITCH_NUM_PORTS; i++) {
-               struct net_device *dev;
-               struct adm5120_if_priv *priv;
-
-               dev = adm5120_if_alloc();
-               if (!dev) {
-                       err = -ENOMEM;
-                       goto err;
-               }
-
-               adm5120_devs[i] = dev;
-               priv = netdev_priv(dev);
-
-               priv->vlan_no = i;
-               priv->port_mask = adm5120_eth_vlans[i];
-
-               memcpy(dev->dev_addr, adm5120_eth_macs[i], 6);
-               adm5120_write_mac(dev);
-
-               err = register_netdev(dev);
-               if (err) {
-                       SW_INFO("%s register failed, error=%d\n",
-                                       dev->name, err);
-                       goto err;
-               }
-       }
-
-       /* setup vlan/port mapping after devs are filled up */
-       adm5120_set_vlan(adm5120_eth_vlans);
-
-       /* enable CPU port */
-       t = sw_read_reg(SWITCH_REG_CPUP_CONF);
-       t &= ~CPUP_CONF_DCPUP;
-       sw_write_reg(SWITCH_REG_CPUP_CONF, t);
-
-       return 0;
-
-err:
-       adm5120_switch_cleanup();
-
-       SW_ERR("init failed\n");
-       return err;
-}
-
-static int adm5120_switch_remove(struct platform_device *dev)
-{
-       adm5120_switch_cleanup();
-       return 0;
-}
-
-static struct platform_driver adm5120_switch_driver = {
-       .probe          = adm5120_switch_probe,
-       .remove         = adm5120_switch_remove,
-       .driver         = {
-               .name   = DRV_NAME,
-       },
-};
-
-/* -------------------------------------------------------------------------- */
-
-static int __init adm5120_switch_mod_init(void)
-{
-       int err;
-
-       pr_info(DRV_DESC " version " DRV_VERSION "\n");
-       err = platform_driver_register(&adm5120_switch_driver);
-
-       return err;
-}
-
-static void __exit adm5120_switch_mod_exit(void)
-{
-       platform_driver_unregister(&adm5120_switch_driver);
-}
-
-module_init(adm5120_switch_mod_init);
-module_exit(adm5120_switch_mod_exit);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
-MODULE_DESCRIPTION(DRV_DESC);
-MODULE_VERSION(DRV_VERSION);
diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.h b/target/linux/adm5120/files/drivers/net/adm5120sw.h
deleted file mode 100644 (file)
index c7c5ced..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
-/*
- *     Defines for ADM5120 built in ethernet switch driver
- *
- *     Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
- *
- *     Values come from ADM5120 datasheet and original ADMtek 2.4 driver,
- *     Copyright ADMtek Inc.
- */
-
-#ifndef _INCLUDE_ADM5120SW_H_
-#define _INCLUDE_ADM5120SW_H_
-
-#define SIOCSMATRIX    SIOCDEVPRIVATE
-#define SIOCGMATRIX    SIOCDEVPRIVATE+1
-#define SIOCGADMINFO   SIOCDEVPRIVATE+2
-
-struct adm5120_sw_info {
-       u16     magic;
-       u16     ports;
-       u16     vlan;
-};
-
-#endif /* _INCLUDE_ADM5120SW_H_ */
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-dbg.c
deleted file mode 100644 (file)
index f3b55f6..0000000
+++ /dev/null
@@ -1,842 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-dbg.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-static inline char *ed_typestring(int ed_type)
-{
-       switch (ed_type) {
-       case PIPE_CONTROL:
-               return "ctrl";
-       case PIPE_BULK:
-               return "bulk";
-       case PIPE_INTERRUPT:
-               return "intr";
-       case PIPE_ISOCHRONOUS:
-               return "isoc";
-       }
-       return "(bad ed_type)";
-}
-
-static inline char *ed_statestring(int state)
-{
-       switch (state) {
-       case ED_IDLE:
-               return "IDLE";
-       case ED_UNLINK:
-               return "UNLINK";
-       case ED_OPER:
-               return "OPER";
-       }
-       return "?STATE";
-}
-
-static inline char *pipestring(int pipe)
-{
-       return ed_typestring(usb_pipetype(pipe));
-}
-
-static inline char *td_pidstring(u32 info)
-{
-       switch (info & TD_DP) {
-       case TD_DP_SETUP:
-               return "SETUP";
-       case TD_DP_IN:
-               return "IN";
-       case TD_DP_OUT:
-               return "OUT";
-       }
-       return "?PID";
-}
-
-static inline char *td_togglestring(u32 info)
-{
-       switch (info & TD_T) {
-       case TD_T_DATA0:
-               return "DATA0";
-       case TD_T_DATA1:
-               return "DATA1";
-       case TD_T_CARRY:
-               return "CARRY";
-       }
-       return "?TOGGLE";
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef DEBUG
-
-/* debug| print the main components of an URB
- * small: 0) header + data packets 1) just header
- */
-static void __attribute__((unused))
-urb_print(struct admhcd *ahcd, struct urb *urb, char *str, int small, int status)
-{
-       unsigned int pipe = urb->pipe;
-
-       if (!urb->dev || !urb->dev->bus) {
-               admhc_dbg(ahcd, "%s URB: no dev", str);
-               return;
-       }
-
-#ifndef        ADMHC_VERBOSE_DEBUG
-       if (status != 0)
-#endif
-       admhc_dbg(ahcd, "URB-%s %p dev=%d ep=%d%s-%s flags=%x len=%d/%d "
-                       "stat=%d\n",
-                       str,
-                       urb,
-                       usb_pipedevice (pipe),
-                       usb_pipeendpoint (pipe),
-                       usb_pipeout(pipe)? "out" : "in",
-                       pipestring(pipe),
-                       urb->transfer_flags,
-                       urb->actual_length,
-                       urb->transfer_buffer_length,
-                       status);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       if (!small) {
-               int i, len;
-
-               if (usb_pipecontrol(pipe)) {
-                       admhc_dbg(ahcd, "setup(8):");
-                       for (i = 0; i < 8 ; i++)
-                               printk (" %02x", ((__u8 *) urb->setup_packet) [i]);
-                       printk ("\n");
-               }
-               if (urb->transfer_buffer_length > 0 && urb->transfer_buffer) {
-                       admhc_dbg(ahcd, "data(%d/%d):",
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-                       len = usb_pipeout(pipe)?
-                                               urb->transfer_buffer_length: urb->actual_length;
-                       for (i = 0; i < 16 && i < len; i++)
-                               printk(" %02x", ((__u8 *)urb->transfer_buffer)[i]);
-                       printk("%s stat:%d\n", i < len? "...": "", status);
-               }
-       }
-#endif /* ADMHC_VERBOSE_DEBUG */
-}
-
-#define admhc_dbg_sw(ahcd, next, size, format, arg...) \
-       do { \
-       if (next) { \
-               unsigned s_len; \
-               s_len = scnprintf(*next, *size, format, ## arg ); \
-               *size -= s_len; *next += s_len; \
-       } else \
-               admhc_dbg(ahcd,format, ## arg ); \
-       } while (0);
-
-
-static void admhc_dump_intr_mask(struct admhcd *ahcd, char *label, u32 mask,
-               char **next, unsigned *size)
-{
-       admhc_dbg_sw(ahcd, next, size, "%s 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n",
-               label,
-               mask,
-               (mask & ADMHC_INTR_INTA) ? " INTA" : "",
-               (mask & ADMHC_INTR_FATI) ? " FATI" : "",
-               (mask & ADMHC_INTR_SWI) ? " SWI" : "",
-               (mask & ADMHC_INTR_TDC) ? " TDC" : "",
-               (mask & ADMHC_INTR_FNO) ? " FNO" : "",
-               (mask & ADMHC_INTR_SO) ? " SO" : "",
-               (mask & ADMHC_INTR_INSM) ? " INSM" : "",
-               (mask & ADMHC_INTR_BABI) ? " BABI" : "",
-               (mask & ADMHC_INTR_7) ? " !7!" : "",
-               (mask & ADMHC_INTR_6) ? " !6!" : "",
-               (mask & ADMHC_INTR_RESI) ? " RESI" : "",
-               (mask & ADMHC_INTR_SOFI) ? " SOFI" : ""
-               );
-}
-
-static void maybe_print_eds(struct admhcd *ahcd, char *label, u32 value,
-               char **next, unsigned *size)
-{
-       if (value)
-               admhc_dbg_sw(ahcd, next, size, "%s %08x\n", label, value);
-}
-
-static char *buss2string (int state)
-{
-       switch (state) {
-       case ADMHC_BUSS_RESET:
-               return "reset";
-       case ADMHC_BUSS_RESUME:
-               return "resume";
-       case ADMHC_BUSS_OPER:
-               return "operational";
-       case ADMHC_BUSS_SUSPEND:
-               return "suspend";
-       }
-       return "?state";
-}
-
-static void
-admhc_dump_status(struct admhcd *ahcd, char **next, unsigned *size)
-{
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32                     temp;
-
-       temp = admhc_readl(ahcd, &regs->gencontrol);
-       admhc_dbg_sw(ahcd, next, size,
-               "gencontrol 0x%08x%s%s%s%s\n",
-               temp,
-               (temp & ADMHC_CTRL_UHFE) ? " UHFE" : "",
-               (temp & ADMHC_CTRL_SIR) ? " SIR" : "",
-               (temp & ADMHC_CTRL_DMAA) ? " DMAA" : "",
-               (temp & ADMHC_CTRL_SR) ? " SR" : ""
-               );
-
-       temp = admhc_readl(ahcd, &regs->host_control);
-       admhc_dbg_sw(ahcd, next, size,
-               "host_control 0x%08x BUSS=%s%s\n",
-               temp,
-               buss2string(temp & ADMHC_HC_BUSS),
-               (temp & ADMHC_HC_DMAE) ? " DMAE" : ""
-               );
-
-       admhc_dump_intr_mask(ahcd, "int_status",
-                       admhc_readl(ahcd, &regs->int_status),
-                       next, size);
-       admhc_dump_intr_mask(ahcd, "int_enable",
-                       admhc_readl(ahcd, &regs->int_enable),
-                       next, size);
-
-       maybe_print_eds(ahcd, "hosthead",
-                       admhc_readl(ahcd, &regs->hosthead), next, size);
-}
-
-#define dbg_port_sw(hc,num,value,next,size) \
-       admhc_dbg_sw(hc, next, size, \
-               "portstatus [%d] " \
-               "0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               num, temp, \
-               (temp & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (temp & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (temp & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (temp & ADMHC_PS_PESC) ? " PESC" : "", \
-               (temp & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (temp & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (temp & ADMHC_PS_PPS) ? " PPS" : "", \
-               (temp & ADMHC_PS_PRS) ? " PRS" : "", \
-               (temp & ADMHC_PS_POCI) ? " POCI" : "", \
-               (temp & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (temp & ADMHC_PS_PES) ? " PES" : "", \
-               (temp & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-
-static void
-admhc_dump_roothub(
-       struct admhcd *ahcd,
-       int verbose,
-       char **next,
-       unsigned *size)
-{
-       u32                     temp, i;
-
-       temp = admhc_read_rhdesc(ahcd);
-       if (temp == ~(u32)0)
-               return;
-
-       if (verbose) {
-               admhc_dbg_sw(ahcd, next, size,
-                       "rhdesc %08x%s%s%s%s%s%s PPCM=%02x%s%s%s%s NUMP=%d(%d)\n",
-                       temp,
-                       (temp & ADMHC_RH_CRWE) ? " CRWE" : "",
-                       (temp & ADMHC_RH_OCIC) ? " OCIC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPSC" : "",
-                       (temp & ADMHC_RH_LPSC) ? " DRWE" : "",
-                       (temp & ADMHC_RH_LPSC) ? " OCI" : "",
-                       (temp & ADMHC_RH_LPSC) ? " LPS" : "",
-                       ((temp & ADMHC_RH_PPCM) >> 16),
-                       (temp & ADMHC_RH_NOCP) ? " NOCP" : "",
-                       (temp & ADMHC_RH_OCPM) ? " OCPM" : "",
-                       (temp & ADMHC_RH_NPS) ? " NPS" : "",
-                       (temp & ADMHC_RH_PSM) ? " PSM" : "",
-                       (temp & ADMHC_RH_NUMP), ahcd->num_ports
-                       );
-       }
-
-       for (i = 0; i < ahcd->num_ports; i++) {
-               temp = admhc_read_portstatus(ahcd, i);
-               dbg_port_sw(ahcd, i, temp, next, size);
-       }
-}
-
-static void admhc_dump(struct admhcd *ahcd, int verbose)
-{
-       admhc_dbg(ahcd, "ADMHC ahcd state\n");
-
-       /* dumps some of the state we know about */
-       admhc_dump_status(ahcd, NULL, NULL);
-       admhc_dbg(ahcd,"current frame #%04x\n",
-               admhc_frame_no(ahcd));
-
-       admhc_dump_roothub(ahcd, verbose, NULL, NULL);
-}
-
-static const char data0[] = "DATA0";
-static const char data1[] = "DATA1";
-
-static void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-               const struct td *td)
-{
-       u32     tmp;
-
-       admhc_dbg(ahcd, "%s td %p; urb %p index %d; hwNextTD %08x\n",
-               label, td,
-               td->urb, td->index,
-               hc32_to_cpup(ahcd, &td->hwNextTD));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwINFO);
-       admhc_dbg(ahcd, "     status %08x%s CC=%x EC=%d %s %s ISI=%x FN=%x\n",
-               tmp,
-               (tmp & TD_OWN) ? " OWN" : "",
-               TD_CC_GET(tmp),
-               TD_EC_GET(tmp),
-               td_togglestring(tmp),
-               td_pidstring(tmp),
-               TD_ISI_GET(tmp),
-               TD_FN_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &td->hwCBL);
-       admhc_dbg(ahcd, "     dbp %08x; cbl %08x; LEN=%d%s\n",
-               hc32_to_cpup(ahcd, &td->hwDBP),
-               tmp,
-               TD_BL_GET(tmp),
-               (tmp & TD_IE) ? " IE" : "");
-}
-
-/* caller MUST own hcd spinlock if verbose is set! */
-static void __attribute__((unused))
-admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-               const struct ed *ed, int verbose)
-{
-       u32 tmp = hc32_to_cpu(ahcd, ed->hwINFO);
-
-       admhc_dbg(ahcd, "%s ed %p %s type %s; next ed %08x\n",
-               label,
-               ed, ed_statestring(ed->state), ed_typestring(ed->type),
-               hc32_to_cpup(ahcd, &ed->hwNextED));
-
-       admhc_dbg(ahcd, "  info %08x MAX=%d%s%s%s%s EP=%d DEV=%d\n", tmp,
-               ED_MPS_GET(tmp),
-               (tmp & ED_ISO) ? " ISO" : "",
-               (tmp & ED_SKIP) ? " SKIP" : "",
-               (tmp & ED_SPEED_FULL) ? " FULL" : " LOW",
-               (tmp & ED_INT) ? " INT" : "",
-               ED_EN_GET(tmp),
-               ED_FA_GET(tmp));
-
-       tmp = hc32_to_cpup(ahcd, &ed->hwHeadP);
-       admhc_dbg(ahcd, "  tds: head %08x tail %08x %s%s%s\n",
-               tmp & TD_MASK,
-               hc32_to_cpup (ahcd, &ed->hwTailP),
-               (tmp & ED_C) ? data1 : data0,
-               (tmp & ED_H) ? " HALT" : "",
-               verbose ? " td list follows" : " (not listing)");
-
-       if (verbose) {
-               struct list_head        *tmp;
-
-               /* use ed->td_list because HC concurrently modifies
-                * hwNextTD as it accumulates ed_donelist.
-                */
-               list_for_each(tmp, &ed->td_list) {
-                       struct td               *td;
-                       td = list_entry(tmp, struct td, td_list);
-                       admhc_dump_td (ahcd, "  ->", td);
-               }
-       }
-}
-
-#else /* ifdef DEBUG */
-
-static inline void urb_print(struct admhcd *ahcd, struct urb * urb, char * str,
-       int small) {}
-static inline void admhc_dump_ed(const struct admhcd *ahcd, const char *label,
-       const struct ed *ed, int verbose) {}
-static inline void admhc_dump_td(const struct admhcd *ahcd, const char *label,
-       const struct td *td) {}
-static inline void admhc_dump(struct admhcd *ahcd, int verbose) {}
-
-#undef ADMHC_VERBOSE_DEBUG
-
-#endif /* DEBUG */
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef STUB_DEBUG_FILES
-
-static inline void create_debug_files(struct admhcd *bus) { }
-static inline void remove_debug_files(struct admhcd *bus) { }
-
-#else
-
-static int debug_async_open(struct inode *, struct file *);
-static int debug_periodic_open(struct inode *, struct file *);
-static int debug_registers_open(struct inode *, struct file *);
-static ssize_t debug_output(struct file*, char __user*, size_t, loff_t*);
-static int debug_close(struct inode *, struct file *);
-
-static const struct file_operations debug_async_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_async_open,
-       .read           = debug_output,
-       .release        = debug_close,
-};
-static const struct file_operations debug_periodic_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_periodic_open,
-       .read           = debug_output,
-       .release        = debug_close,
-};
-static const struct file_operations debug_registers_fops = {
-       .owner          = THIS_MODULE,
-       .open           = debug_registers_open,
-       .read           = debug_output,
-       .release        = debug_close,
-};
-
-static struct dentry *admhc_debug_root;
-
-struct debug_buffer {
-       ssize_t (*fill_func)(struct debug_buffer *);    /* fill method */
-       struct device *dev;
-       struct mutex mutex;     /* protect filling of buffer */
-       size_t count;           /* number of characters filled into buffer */
-       char *page;
-};
-
-static ssize_t
-show_list(struct admhcd *ahcd, char *buf, size_t count, struct ed *ed)
-{
-       unsigned temp;
-       unsigned size = count;
-
-       if (!ed)
-               return 0;
-
-       /* dump a snapshot of the bulk or control schedule */
-       while (ed) {
-               u32 info = hc32_to_cpu(ahcd, ed->hwINFO);
-               u32 headp = hc32_to_cpu(ahcd, ed->hwHeadP);
-               u32 tailp = hc32_to_cpu(ahcd, ed->hwTailP);
-               struct list_head *entry;
-               struct td       *td;
-
-               temp = scnprintf(buf, size,
-                       "ed/%p %s %s %cs dev%d ep%d %s%smax %d %08x%s%s %s"
-                       " h:%08x t:%08x",
-                       ed,
-                       ed_statestring(ed->state),
-                       ed_typestring (ed->type),
-                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                       info & ED_FA_MASK,
-                       (info >> ED_EN_SHIFT) & ED_EN_MASK,
-                       (info & ED_INT) ? "INT " : "",
-                       (info & ED_ISO) ? "ISO " : "",
-                       (info >> ED_MPS_SHIFT) & ED_MPS_MASK ,
-                       info,
-                       (info & ED_SKIP) ? " S" : "",
-                       (headp & ED_H) ? " H" : "",
-                       (headp & ED_C) ? data1 : data0,
-                       headp & ED_MASK,tailp);
-               size -= temp;
-               buf += temp;
-
-               list_for_each(entry, &ed->td_list) {
-                       u32             dbp, cbl;
-
-                       td = list_entry(entry, struct td, td_list);
-                       info = hc32_to_cpup (ahcd, &td->hwINFO);
-                       dbp = hc32_to_cpup (ahcd, &td->hwDBP);
-                       cbl = hc32_to_cpup (ahcd, &td->hwCBL);
-
-                       temp = scnprintf(buf, size,
-                               "\n\ttd/%p %s %d %s%scc=%x urb %p (%08x,%08x)",
-                               td,
-                               td_pidstring(info),
-                               TD_BL_GET(cbl),
-                               (info & TD_OWN) ? "" : "DONE ",
-                               (cbl & TD_IE) ? "IE " : "",
-                               TD_CC_GET (info), td->urb, info, cbl);
-                       size -= temp;
-                       buf += temp;
-               }
-
-               temp = scnprintf(buf, size, "\n");
-               size -= temp;
-               buf += temp;
-
-               ed = ed->ed_next;
-       }
-
-       return count - size;
-}
-
-static ssize_t fill_async_buffer(struct debug_buffer *buf)
-{
-       struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       size_t                  temp;
-       unsigned long           flags;
-
-       bus = dev_get_drvdata(buf->dev);
-       hcd = bus_to_hcd(bus);
-       ahcd = hcd_to_admhcd(hcd);
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       temp = show_list(ahcd, buf->page, PAGE_SIZE, ahcd->ed_head);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return temp;
-}
-
-
-#define DBG_SCHED_LIMIT 64
-
-static ssize_t fill_periodic_buffer(struct debug_buffer *buf)
-{
-       struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct ed               **seen, *ed;
-       unsigned long           flags;
-       unsigned                temp, size, seen_count;
-       char                    *next;
-       unsigned                i;
-
-       if (!(seen = kmalloc(DBG_SCHED_LIMIT * sizeof *seen, GFP_ATOMIC)))
-               return 0;
-       seen_count = 0;
-
-       bus = dev_get_drvdata(buf->dev);
-       hcd = bus_to_hcd(bus);
-       ahcd = hcd_to_admhcd(hcd);
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       temp = scnprintf(next, size, "size = %d\n", NUM_INTS);
-       size -= temp;
-       next += temp;
-
-       /* dump a snapshot of the periodic schedule (and load) */
-       spin_lock_irqsave(&ahcd->lock, flags);
-       for (i = 0; i < NUM_INTS; i++) {
-               if (!(ed = ahcd->periodic [i]))
-                       continue;
-
-               temp = scnprintf(next, size, "%2d [%3d]:", i, ahcd->load [i]);
-               size -= temp;
-               next += temp;
-
-               do {
-                       temp = scnprintf(next, size, " ed%d/%p",
-                               ed->interval, ed);
-                       size -= temp;
-                       next += temp;
-                       for (temp = 0; temp < seen_count; temp++) {
-                               if (seen [temp] == ed)
-                                       break;
-                       }
-
-                       /* show more info the first time around */
-                       if (temp == seen_count) {
-                               u32     info = hc32_to_cpu (ahcd, ed->hwINFO);
-                               struct list_head        *entry;
-                               unsigned                qlen = 0;
-
-                               /* qlen measured here in TDs, not urbs */
-                               list_for_each (entry, &ed->td_list)
-                                       qlen++;
-                               temp = scnprintf(next, size,
-                                       " (%cs dev%d ep%d%s qlen %u"
-                                       " max %d %08x%s%s)",
-                                       (info & ED_SPEED_FULL) ? 'f' : 'l',
-                                       ED_FA_GET(info),
-                                       ED_EN_GET(info),
-                                       (info & ED_ISO) ? "iso" : "int",
-                                       qlen,
-                                       ED_MPS_GET(info),
-                                       info,
-                                       (info & ED_SKIP) ? " K" : "",
-                                       (ed->hwHeadP &
-                                               cpu_to_hc32(ahcd, ED_H)) ?
-                                                       " H" : "");
-                               size -= temp;
-                               next += temp;
-
-                               if (seen_count < DBG_SCHED_LIMIT)
-                                       seen [seen_count++] = ed;
-
-                               ed = ed->ed_next;
-
-                       } else {
-                               /* we've seen it and what's after */
-                               temp = 0;
-                               ed = NULL;
-                       }
-
-               } while (ed);
-
-               temp = scnprintf(next, size, "\n");
-               size -= temp;
-               next += temp;
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       kfree (seen);
-
-       return PAGE_SIZE - size;
-}
-
-
-#undef DBG_SCHED_LIMIT
-
-static ssize_t fill_registers_buffer(struct debug_buffer *buf)
-{
-       struct usb_bus          *bus;
-       struct usb_hcd          *hcd;
-       struct admhcd           *ahcd;
-       struct admhcd_regs __iomem *regs;
-       unsigned long           flags;
-       unsigned                temp, size;
-       char                    *next;
-       u32                     rdata;
-
-       bus = dev_get_drvdata(buf->dev);
-       hcd = bus_to_hcd(bus);
-       ahcd = hcd_to_admhcd(hcd);
-       regs = ahcd->regs;
-       next = buf->page;
-       size = PAGE_SIZE;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       /* dump driver info, then registers in spec order */
-
-       admhc_dbg_sw(ahcd, &next, &size,
-               "bus %s, device %s\n"
-               "%s\n"
-               "%s version " DRIVER_VERSION "\n",
-               hcd->self.controller->bus->name,
-               hcd->self.controller->bus_id,
-               hcd->product_desc,
-               hcd_name);
-
-       if (bus->controller->power.power_state.event) {
-               size -= scnprintf(next, size,
-                       "SUSPENDED (no register access)\n");
-               goto done;
-       }
-
-       admhc_dump_status(ahcd, &next, &size);
-
-       /* other registers mostly affect frame timings */
-       rdata = admhc_readl(ahcd, &regs->fminterval);
-       temp = scnprintf(next, size,
-                       "fmintvl 0x%08x %sFSLDP=0x%04x FI=0x%04x\n",
-                       rdata, (rdata & ADMHC_SFI_FIT) ? "FIT " : "",
-                       (rdata >> ADMHC_SFI_FSLDP_SHIFT) & ADMHC_SFI_FSLDP_MASK,
-                       rdata  & ADMHC_SFI_FI_MASK);
-       size -= temp;
-       next += temp;
-
-       rdata = admhc_readl(ahcd, &regs->fmnumber);
-       temp = scnprintf(next, size, "fmnumber 0x%08x %sFR=0x%04x FN=%04x\n",
-                       rdata, (rdata & ADMHC_SFN_FRT) ? "FRT " : "",
-                       (rdata >> ADMHC_SFN_FR_SHIFT) & ADMHC_SFN_FR_MASK,
-                       rdata  & ADMHC_SFN_FN_MASK);
-       size -= temp;
-       next += temp;
-
-       /* TODO: use predefined bitmask */
-       rdata = admhc_readl(ahcd, &regs->lsthresh);
-       temp = scnprintf(next, size, "lsthresh 0x%04x\n",
-                       rdata & 0x3fff);
-       size -= temp;
-       next += temp;
-
-       temp = scnprintf(next, size, "hub poll timer: %s\n",
-                       admhcd_to_hcd(ahcd)->poll_rh ? "ON" : "OFF");
-       size -= temp;
-       next += temp;
-
-       /* roothub */
-       admhc_dump_roothub(ahcd, 1, &next, &size);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return PAGE_SIZE - size;
-}
-
-
-static struct debug_buffer *alloc_buffer(struct device *dev,
-                               ssize_t (*fill_func)(struct debug_buffer *))
-{
-       struct debug_buffer *buf;
-
-       buf = kzalloc(sizeof(struct debug_buffer), GFP_KERNEL);
-
-       if (buf) {
-               buf->dev = dev;
-               buf->fill_func = fill_func;
-               mutex_init(&buf->mutex);
-       }
-
-       return buf;
-}
-
-static int fill_buffer(struct debug_buffer *buf)
-{
-       int ret = 0;
-
-       if (!buf->page)
-               buf->page = (char *)get_zeroed_page(GFP_KERNEL);
-
-       if (!buf->page) {
-               ret = -ENOMEM;
-               goto out;
-       }
-
-       ret = buf->fill_func(buf);
-
-       if (ret >= 0) {
-               buf->count = ret;
-               ret = 0;
-       }
-
-out:
-       return ret;
-}
-
-static ssize_t debug_output(struct file *file, char __user *user_buf,
-                       size_t len, loff_t *offset)
-{
-       struct debug_buffer *buf = file->private_data;
-       int ret = 0;
-
-       mutex_lock(&buf->mutex);
-       if (buf->count == 0) {
-               ret = fill_buffer(buf);
-               if (ret != 0) {
-                       mutex_unlock(&buf->mutex);
-                       goto out;
-               }
-       }
-       mutex_unlock(&buf->mutex);
-
-       ret = simple_read_from_buffer(user_buf, len, offset,
-                                       buf->page, buf->count);
-
-out:
-       return ret;
-}
-
-static int debug_close(struct inode *inode, struct file *file)
-{
-       struct debug_buffer *buf = file->private_data;
-
-       if (buf) {
-               if (buf->page)
-                       free_page((unsigned long)buf->page);
-               kfree(buf);
-       }
-
-       return 0;
-}
-
-static int debug_async_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private, fill_async_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_periodic_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_periodic_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static int debug_registers_open(struct inode *inode, struct file *file)
-{
-       file->private_data = alloc_buffer(inode->i_private,
-                                               fill_registers_buffer);
-
-       return file->private_data ? 0 : -ENOMEM;
-}
-
-static inline void create_debug_files(struct admhcd *ahcd)
-{
-       struct usb_bus *bus = &admhcd_to_hcd(ahcd)->self;
-       struct device *dev = bus->dev;
-
-       ahcd->debug_dir = debugfs_create_dir(bus->bus_name, admhc_debug_root);
-       if (!ahcd->debug_dir)
-               goto dir_error;
-
-       ahcd->debug_async = debugfs_create_file("async", S_IRUGO,
-                                               ahcd->debug_dir, dev,
-                                               &debug_async_fops);
-       if (!ahcd->debug_async)
-               goto async_error;
-
-       ahcd->debug_periodic = debugfs_create_file("periodic", S_IRUGO,
-                                               ahcd->debug_dir, dev,
-                                               &debug_periodic_fops);
-       if (!ahcd->debug_periodic)
-               goto periodic_error;
-
-       ahcd->debug_registers = debugfs_create_file("registers", S_IRUGO,
-                                               ahcd->debug_dir, dev,
-                                               &debug_registers_fops);
-       if (!ahcd->debug_registers)
-               goto registers_error;
-
-       admhc_dbg(ahcd, "created debug files\n");
-       return;
-
-registers_error:
-       debugfs_remove(ahcd->debug_periodic);
-periodic_error:
-       debugfs_remove(ahcd->debug_async);
-async_error:
-       debugfs_remove(ahcd->debug_dir);
-dir_error:
-       ahcd->debug_periodic = NULL;
-       ahcd->debug_async = NULL;
-       ahcd->debug_dir = NULL;
-}
-
-static inline void remove_debug_files(struct admhcd *ahcd)
-{
-       debugfs_remove(ahcd->debug_registers);
-       debugfs_remove(ahcd->debug_periodic);
-       debugfs_remove(ahcd->debug_async);
-       debugfs_remove(ahcd->debug_dir);
-}
-
-#endif
-
-/*-------------------------------------------------------------------------*/
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-drv.c
deleted file mode 100644 (file)
index ca7f8ef..0000000
+++ /dev/null
@@ -1,236 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-au1xxx.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *   (C) Copyright 2002 Hewlett-Packard Company
- *
- *   Written by Christopher Hoover <ch@hpl.hp.com>
- *   Based on fragments of previous driver by Rusell King et al.
- *
- *   Modified for LH7A404 from ahcd-sa1111.c
- *    by Durgesh Pattamatta <pattamattad@sharpsec.com>
- *   Modified for AMD Alchemy Au1xxx
- *    by Matt Porter <mporter@kernel.crashing.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/platform_device.h>
-#include <linux/signal.h>
-
-#include <asm/bootinfo.h>
-#include <adm5120_defs.h>
-
-#ifdef DEBUG
-#define HCD_DBG(f, a...)       printk(KERN_DEBUG "%s: " f, hcd_name, ## a)
-#else
-#define HCD_DBG(f, a...)       do {} while (0)
-#endif
-#define HCD_ERR(f, a...)       printk(KERN_ERR "%s: " f, hcd_name, ## a)
-#define HCD_INFO(f, a...)      printk(KERN_INFO "%s: " f, hcd_name, ## a)
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_adm5120_probe(const struct hc_driver *driver,
-                 struct platform_device *dev)
-{
-       int retval;
-       struct usb_hcd *hcd;
-       int irq;
-       struct resource *regs;
-
-       /* sanity checks */
-       regs = platform_get_resource(dev, IORESOURCE_MEM, 0);
-       if (!regs) {
-               HCD_DBG("no IOMEM resource found\n");
-               return -ENODEV;
-       }
-
-       irq = platform_get_irq(dev, 0);
-       if (irq < 0) {
-               HCD_DBG("no IRQ resource found\n");
-               return -ENODEV;
-       }
-
-       hcd = usb_create_hcd(driver, &dev->dev, "ADM5120");
-       if (!hcd)
-               return -ENOMEM;
-
-       hcd->rsrc_start = regs->start;
-       hcd->rsrc_len = regs->end - regs->start + 1;
-
-       if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len, hcd_name)) {
-               HCD_DBG("request_mem_region failed\n");
-               retval = -EBUSY;
-               goto err_dev;
-       }
-
-       hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
-       if (!hcd->regs) {
-               HCD_DBG("ioremap failed\n");
-               retval = -ENOMEM;
-               goto err_mem;
-       }
-
-       admhc_hcd_init(hcd_to_admhcd(hcd));
-
-       retval = usb_add_hcd(hcd, irq, IRQF_DISABLED);
-       if (retval)
-               goto err_io;
-
-       return 0;
-
-err_io:
-       iounmap(hcd->regs);
-err_mem:
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-err_dev:
-       usb_put_hcd(hcd);
-       return retval;
-}
-
-
-/* may be called without controller electrically present */
-/* may be called with controller, bus, and devices active */
-
-static void admhc_adm5120_remove(struct usb_hcd *hcd,
-               struct platform_device *dev)
-{
-       usb_remove_hcd(hcd);
-       iounmap(hcd->regs);
-       release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
-       usb_put_hcd(hcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int __devinit
-admhc_adm5120_start(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd (hcd);
-       int             ret;
-
-       ret = admhc_init(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to init %s\n", hcd->self.bus_name);
-               goto err;
-       }
-
-       ret = admhc_run(ahcd);
-       if (ret < 0) {
-               HCD_ERR("unable to run %s\n", hcd->self.bus_name);
-               goto err_stop;
-       }
-
-       return 0;
-
-err_stop:
-       admhc_stop(hcd);
-err:
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static const struct hc_driver adm5120_hc_driver = {
-       .description =          hcd_name,
-       .product_desc =         "ADM5120 built-in USB 1.1 Host Controller",
-       .hcd_priv_size =        sizeof(struct admhcd),
-
-       /*
-        * generic hardware linkage
-        */
-       .irq =                  admhc_irq,
-       .flags =                HCD_USB11 | HCD_MEMORY,
-
-       /*
-        * basic lifecycle operations
-        */
-       .start =                admhc_adm5120_start,
-       .stop =                 admhc_stop,
-       .shutdown =             admhc_shutdown,
-
-       /*
-        * managing i/o requests and associated device resources
-        */
-       .urb_enqueue =          admhc_urb_enqueue,
-       .urb_dequeue =          admhc_urb_dequeue,
-       .endpoint_disable =     admhc_endpoint_disable,
-
-       /*
-        * scheduling support
-        */
-       .get_frame_number =     admhc_get_frame_number,
-
-       /*
-        * root hub support
-        */
-       .hub_status_data =      admhc_hub_status_data,
-       .hub_control =          admhc_hub_control,
-       .hub_irq_enable =       admhc_hub_irq_enable,
-#ifdef CONFIG_PM
-       .bus_suspend =          admhc_bus_suspend,
-       .bus_resume =           admhc_bus_resume,
-#endif
-       .start_port_reset =     admhc_start_port_reset,
-};
-
-/*-------------------------------------------------------------------------*/
-
-static int usb_hcd_adm5120_probe(struct platform_device *pdev)
-{
-       int ret;
-
-       ret = admhc_adm5120_probe(&adm5120_hc_driver, pdev);
-
-       return ret;
-}
-
-static int usb_hcd_adm5120_remove(struct platform_device *pdev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(pdev);
-
-       admhc_adm5120_remove(hcd, pdev);
-
-       return 0;
-}
-
-#ifdef CONFIG_PM
-/* TODO */
-static int usb_hcd_adm5120_suspend(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-
-static int usb_hcd_adm5120_resume(struct platform_device *dev)
-{
-       struct usb_hcd *hcd = platform_get_drvdata(dev);
-
-       return 0;
-}
-#else
-#define usb_hcd_adm5120_suspend        NULL
-#define usb_hcd_adm5120_resume NULL
-#endif /* CONFIG_PM */
-
-static struct platform_driver usb_hcd_adm5120_driver = {
-       .probe          = usb_hcd_adm5120_probe,
-       .remove         = usb_hcd_adm5120_remove,
-       .shutdown       = usb_hcd_platform_shutdown,
-       .suspend        = usb_hcd_adm5120_suspend,
-       .resume         = usb_hcd_adm5120_resume,
-       .driver         = {
-               .name   = "adm5120-hcd",
-               .owner  = THIS_MODULE,
-       },
-};
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hcd.c
deleted file mode 100644 (file)
index 72a2525..0000000
+++ /dev/null
@@ -1,845 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hcd.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *   [ Initialisation is based on Linus'  ]
- *   [ uhci code and gregs ahcd fragments ]
- *   [ (C) Copyright 1999 Linus Torvalds  ]
- *   [ (C) Copyright 1999 Gregory P. Smith]
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/delay.h>
-#include <linux/ioport.h>
-#include <linux/sched.h>
-#include <linux/slab.h>
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/timer.h>
-#include <linux/list.h>
-#include <linux/usb.h>
-#include <linux/usb/otg.h>
-#include <linux/dma-mapping.h>
-#include <linux/dmapool.h>
-#include <linux/reboot.h>
-#include <linux/debugfs.h>
-
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/system.h>
-#include <asm/unaligned.h>
-#include <asm/byteorder.h>
-
-#include "../core/hcd.h"
-#include "../core/hub.h"
-
-#define DRIVER_VERSION "0.25.0"
-#define DRIVER_AUTHOR  "Gabor Juhos <juhosg at openwrt.org>"
-#define DRIVER_DESC    "ADMtek USB 1.1 Host Controller Driver"
-
-/*-------------------------------------------------------------------------*/
-
-#undef ADMHC_VERBOSE_DEBUG     /* not always helpful */
-
-/* For initializing controller (mask in an HCFS mode too) */
-#define        OHCI_CONTROL_INIT       OHCI_CTRL_CBSR
-
-#define        ADMHC_INTR_INIT \
-               ( ADMHC_INTR_MIE | ADMHC_INTR_INSM | ADMHC_INTR_FATI \
-               | ADMHC_INTR_RESI | ADMHC_INTR_TDC | ADMHC_INTR_BABI )
-
-/*-------------------------------------------------------------------------*/
-
-static const char hcd_name [] = "admhc-hcd";
-
-#define        STATECHANGE_DELAY       msecs_to_jiffies(300)
-
-#include "adm5120.h"
-
-static void admhc_dump(struct admhcd *ahcd, int verbose);
-static int admhc_init(struct admhcd *ahcd);
-static void admhc_stop(struct usb_hcd *hcd);
-
-#include "adm5120-dbg.c"
-#include "adm5120-mem.c"
-#include "adm5120-pm.c"
-#include "adm5120-hub.c"
-#include "adm5120-q.c"
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * queue up an urb for anything except the root hub
- */
-static int admhc_urb_enqueue(struct usb_hcd *hcd, struct urb *urb,
-               gfp_t mem_flags)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       struct ed       *ed;
-       struct urb_priv *urb_priv;
-       unsigned int    pipe = urb->pipe;
-       int             td_cnt = 0;
-       unsigned long   flags;
-       int             ret = 0;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       urb_print(ahcd, urb, "ENQEUE", usb_pipein(pipe), -EINPROGRESS);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-       /* every endpoint has an ed, locate and maybe (re)initialize it */
-       ed = ed_get(ahcd, urb->ep, urb->dev, pipe, urb->interval);
-       if (!ed)
-               return -ENOMEM;
-
-       /* for the private part of the URB we need the number of TDs */
-       switch (ed->type) {
-       case PIPE_CONTROL:
-               if (urb->transfer_buffer_length > TD_DATALEN_MAX)
-                       /* td_submit_urb() doesn't yet handle these */
-                       return -EMSGSIZE;
-
-               /* 1 TD for setup, 1 for ACK, plus ... */
-               td_cnt = 2;
-               /* FALLTHROUGH */
-       case PIPE_BULK:
-               /* one TD for every 4096 Bytes (can be upto 8K) */
-               td_cnt += urb->transfer_buffer_length / TD_DATALEN_MAX;
-               /* ... and for any remaining bytes ... */
-               if ((urb->transfer_buffer_length % TD_DATALEN_MAX) != 0)
-                       td_cnt++;
-               /* ... and maybe a zero length packet to wrap it up */
-               if (td_cnt == 0)
-                       td_cnt++;
-               else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0
-                       && (urb->transfer_buffer_length
-                               % usb_maxpacket(urb->dev, pipe,
-                                       usb_pipeout (pipe))) == 0)
-                       td_cnt++;
-               break;
-       case PIPE_INTERRUPT:
-               /*
-                * for Interrupt IN/OUT transactions, each ED contains
-                * only 1 TD.
-                * TODO: check transfer_buffer_length?
-                */
-               td_cnt = 1;
-               break;
-       case PIPE_ISOCHRONOUS:
-               /* number of packets from URB */
-               td_cnt = urb->number_of_packets;
-               break;
-       }
-
-       urb_priv = urb_priv_alloc(ahcd, td_cnt, mem_flags);
-       if (!urb_priv)
-               return -ENOMEM;
-
-       urb_priv->ed = ed;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       /* don't submit to a dead HC */
-       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-       if (!HC_IS_RUNNING(hcd->state)) {
-               ret = -ENODEV;
-               goto fail;
-       }
-
-       ret = usb_hcd_link_urb_to_ep(hcd, urb);
-       if (ret)
-               goto fail;
-
-       /* schedule the ed if needed */
-       if (ed->state == ED_IDLE) {
-               ret = ed_schedule(ahcd, ed);
-               if (ret < 0) {
-                       usb_hcd_unlink_urb_from_ep(hcd, urb);
-                       goto fail;
-               }
-               if (ed->type == PIPE_ISOCHRONOUS) {
-                       u16     frame = admhc_frame_no(ahcd);
-
-                       /* delay a few frames before the first TD */
-                       frame += max_t (u16, 8, ed->interval);
-                       frame &= ~(ed->interval - 1);
-                       frame |= ed->branch;
-                       urb->start_frame = frame;
-
-                       /* yes, only URB_ISO_ASAP is supported, and
-                        * urb->start_frame is never used as input.
-                        */
-               }
-       } else if (ed->type == PIPE_ISOCHRONOUS)
-               urb->start_frame = ed->last_iso + ed->interval;
-
-       /* fill the TDs and link them to the ed; and
-        * enable that part of the schedule, if needed
-        * and update count of queued periodic urbs
-        */
-       urb->hcpriv = urb_priv;
-       td_submit_urb(ahcd, urb);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "admhc_urb_enqueue", urb_priv->ed, 1);
-#endif
-
-fail:
-       if (ret)
-               urb_priv_free(ahcd, urb_priv);
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return ret;
-}
-
-/*
- * decouple the URB from the HC queues (TDs, urb_priv);
- * reporting is always done
- * asynchronously, and we might be dealing with an urb that's
- * partially transferred, or an ED with other urbs being unlinked.
- */
-static int admhc_urb_dequeue(struct usb_hcd *hcd, struct urb *urb,
-               int status)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       unsigned long flags;
-       int ret;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "DEQUEUE", 1, status);
-#endif
-       ret = usb_hcd_check_unlink_urb(hcd, urb, status);
-       if (ret) {
-               /* Do nothing */
-               ;
-       } else if (HC_IS_RUNNING(hcd->state)) {
-               struct urb_priv *urb_priv;
-
-               /* Unless an IRQ completed the unlink while it was being
-                * handed to us, flag it for unlink and giveback, and force
-                * some upcoming INTR_SF to call finish_unlinks()
-                */
-               urb_priv = urb->hcpriv;
-               if (urb_priv) {
-                       if (urb_priv->ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, urb_priv->ed);
-               }
-       } else {
-               /*
-                * with HC dead, we won't respect hc queue pointers
-                * any more ... just clean up every urb's memory.
-                */
-               if (urb->hcpriv)
-                       finish_urb(ahcd, urb, status);
-       }
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* frees config/altsetting state for endpoints,
- * including ED memory, dummy TD, and bulk/intr data toggle
- */
-
-static void admhc_endpoint_disable(struct usb_hcd *hcd,
-               struct usb_host_endpoint *ep)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       unsigned long           flags;
-       struct ed               *ed = ep->hcpriv;
-       unsigned                limit = 1000;
-
-       /* ASSERT:  any requests/urbs are being unlinked */
-       /* ASSERT:  nobody can be submitting urbs for this any more */
-
-       if (!ed)
-               return;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       spin_lock_irqsave(&ahcd->lock, flags);
-       admhc_dump_ed(ahcd, "EP-DISABLE", ed, 1);
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-#endif
-
-rescan:
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       if (!HC_IS_RUNNING(hcd->state)) {
-sanitize:
-               ed->state = ED_IDLE;
-               finish_unlinks(ahcd, 0);
-       }
-
-       switch (ed->state) {
-       case ED_UNLINK:         /* wait for hw to finish? */
-               /* major IRQ delivery trouble loses INTR_SOFI too... */
-               if (limit-- == 0) {
-                       admhc_warn(ahcd, "IRQ INTR_SOFI lossage\n");
-                       goto sanitize;
-               }
-               spin_unlock_irqrestore(&ahcd->lock, flags);
-               schedule_timeout_uninterruptible(1);
-               goto rescan;
-       case ED_IDLE:           /* fully unlinked */
-               if (list_empty(&ed->td_list)) {
-                       td_free (ahcd, ed->dummy);
-                       ed_free (ahcd, ed);
-                       break;
-               }
-               /* else FALL THROUGH */
-       default:
-               /* caller was supposed to have unlinked any requests;
-                * that's not our job.  can't recover; must leak ed.
-                */
-               admhc_err(ahcd, "leak ed %p (#%02x) state %d%s\n",
-                       ed, ep->desc.bEndpointAddress, ed->state,
-                       list_empty(&ed->td_list) ? "" : " (has tds)");
-               td_free(ahcd, ed->dummy);
-               break;
-       }
-
-       ep->hcpriv = NULL;
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-       return;
-}
-
-static int admhc_get_frame_number(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       return admhc_frame_no(ahcd);
-}
-
-static void admhc_usb_reset(struct admhcd *ahcd)
-{
-#if 0
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       ahcd->hc_control &= OHCI_CTRL_RWC;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->regs->control);
-#else
-       /* FIXME */
-       ahcd->host_control = ADMHC_BUSS_RESET;
-       admhc_writel(ahcd, ahcd->host_control ,&ahcd->regs->host_control);
-#endif
-}
-
-/* admhc_shutdown forcibly disables IRQs and DMA, helping kexec and
- * other cases where the next software may expect clean state from the
- * "firmware".  this is bus-neutral, unlike shutdown() methods.
- */
-static void
-admhc_shutdown(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd;
-
-       ahcd = hcd_to_admhcd(hcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-       admhc_dma_disable(ahcd);
-       admhc_usb_reset(ahcd);
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-}
-
-/*-------------------------------------------------------------------------*
- * HC functions
- *-------------------------------------------------------------------------*/
-
-static void admhc_eds_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->ed_tails[PIPE_INTERRUPT]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_INTERRUPT]);
-               ahcd->ed_tails[PIPE_INTERRUPT] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_ISOCHRONOUS]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_ISOCHRONOUS]);
-               ahcd->ed_tails[PIPE_ISOCHRONOUS] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_CONTROL]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_CONTROL]);
-               ahcd->ed_tails[PIPE_CONTROL] = NULL;
-       }
-
-       if (ahcd->ed_tails[PIPE_BULK]) {
-               ed_free(ahcd, ahcd->ed_tails[PIPE_BULK]);
-               ahcd->ed_tails[PIPE_BULK] = NULL;
-       }
-
-       ahcd->ed_head = NULL;
-}
-
-#define ED_DUMMY_INFO  (ED_SPEED_FULL | ED_SKIP)
-
-static int admhc_eds_init(struct admhcd *ahcd)
-{
-       struct ed *ed;
-
-       ed = ed_create(ahcd, PIPE_INTERRUPT, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_INTERRUPT] = ed;
-
-       ed = ed_create(ahcd, PIPE_ISOCHRONOUS, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_ISOCHRONOUS] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_INTERRUPT];
-       ahcd->ed_tails[PIPE_INTERRUPT]->ed_next = ed;
-       ahcd->ed_tails[PIPE_INTERRUPT]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_CONTROL, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_CONTROL] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_ISOCHRONOUS];
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->ed_next = ed;
-       ahcd->ed_tails[PIPE_ISOCHRONOUS]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ed = ed_create(ahcd, PIPE_BULK, ED_DUMMY_INFO);
-       if (!ed)
-               goto err;
-
-       ahcd->ed_tails[PIPE_BULK] = ed;
-       ed->ed_prev = ahcd->ed_tails[PIPE_CONTROL];
-       ahcd->ed_tails[PIPE_CONTROL]->ed_next = ed;
-       ahcd->ed_tails[PIPE_CONTROL]->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_head = ahcd->ed_tails[PIPE_INTERRUPT];
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ed intr", ahcd->ed_tails[PIPE_INTERRUPT], 1);
-       admhc_dump_ed(ahcd, "ed isoc", ahcd->ed_tails[PIPE_ISOCHRONOUS], 1);
-       admhc_dump_ed(ahcd, "ed ctrl", ahcd->ed_tails[PIPE_CONTROL], 1);
-       admhc_dump_ed(ahcd, "ed bulk", ahcd->ed_tails[PIPE_BULK], 1);
-#endif
-
-       return 0;
-
-err:
-       admhc_eds_cleanup(ahcd);
-       return -ENOMEM;
-}
-
-/* init memory, and kick BIOS/SMM off */
-
-static int admhc_init(struct admhcd *ahcd)
-{
-       struct usb_hcd *hcd = admhcd_to_hcd(ahcd);
-       int ret;
-
-       admhc_disable(ahcd);
-       ahcd->regs = hcd->regs;
-
-       /* Disable HC interrupts */
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       /* Read the number of ports unless overridden */
-       if (ahcd->num_ports == 0)
-               ahcd->num_ports = admhc_read_rhdesc(ahcd) & ADMHC_RH_NUMP;
-
-       ret = admhc_mem_init(ahcd);
-       if (ret)
-               goto err;
-
-       /* init dummy endpoints */
-       ret = admhc_eds_init(ahcd);
-       if (ret)
-               goto err;
-
-       create_debug_files(ahcd);
-
-       return 0;
-
-err:
-       admhc_stop(hcd);
-       return ret;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Start an OHCI controller, set the BUS operational
- * resets USB and controller
- * enable interrupts
- */
-static int admhc_run(struct admhcd *ahcd)
-{
-       u32                     temp;
-       int                     first = ahcd->fminterval == 0;
-       struct usb_hcd          *hcd = admhcd_to_hcd(ahcd);
-
-       admhc_disable(ahcd);
-
-       /* boot firmware should have set this up (5.1.1.3.1) */
-       if (first) {
-               temp = admhc_readl(ahcd, &ahcd->regs->fminterval);
-               ahcd->fminterval = temp & ADMHC_SFI_FI_MASK;
-               if (ahcd->fminterval != FI)
-                       admhc_dbg(ahcd, "fminterval delta %d\n",
-                               ahcd->fminterval - FI);
-               ahcd->fminterval |=
-                       (FSLDP(ahcd->fminterval) << ADMHC_SFI_FSLDP_SHIFT);
-               /* also: power/overcurrent flags in rhdesc */
-       }
-
-#if 0  /* TODO: not applicable */
-       /* Reset USB nearly "by the book".  RemoteWakeupConnected was
-        * saved if boot firmware (BIOS/SMM/...) told us it's connected,
-        * or if bus glue did the same (e.g. for PCI add-in cards with
-        * PCI PM support).
-        */
-       if ((ahcd->hc_control & OHCI_CTRL_RWC) != 0
-                       && !device_may_wakeup(hcd->self.controller))
-               device_init_wakeup(hcd->self.controller, 1);
-#endif
-
-       switch (ahcd->host_control & ADMHC_HC_BUSS) {
-       case ADMHC_BUSS_OPER:
-               temp = 0;
-               break;
-       case ADMHC_BUSS_SUSPEND:
-               /* FALLTHROUGH ? */
-       case ADMHC_BUSS_RESUME:
-               ahcd->host_control = ADMHC_BUSS_RESUME;
-               temp = 10 /* msec wait */;
-               break;
-       /* case ADMHC_BUSS_RESET: */
-       default:
-               ahcd->host_control = ADMHC_BUSS_RESET;
-               temp = 50 /* msec wait */;
-               break;
-       }
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       /* flush the writes */
-       admhc_writel_flush(ahcd);
-
-       msleep(temp);
-       temp = admhc_read_rhdesc(ahcd);
-       if (!(temp & ADMHC_RH_NPS)) {
-               /* power down each port */
-               for (temp = 0; temp < ahcd->num_ports; temp++)
-                       admhc_write_portstatus(ahcd, temp, ADMHC_PS_CPP);
-       }
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* 2msec timelimit here means no irqs/preempt */
-       spin_lock_irq(&ahcd->lock);
-
-       admhc_writel(ahcd, ADMHC_CTRL_SR,  &ahcd->regs->gencontrol);
-       temp = 30;      /* ... allow extra time */
-       while ((admhc_readl(ahcd, &ahcd->regs->gencontrol) & ADMHC_CTRL_SR) != 0) {
-               if (--temp == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "USB HC reset timed out!\n");
-                       return -1;
-               }
-               udelay(1);
-       }
-
-       /* enable HOST mode, before access any host specific register */
-       admhc_writel(ahcd, ADMHC_CTRL_UHFE,  &ahcd->regs->gencontrol);
-
-       /* Tell the controller where the descriptor list is */
-       admhc_writel(ahcd, (u32)ahcd->ed_head->dma, &ahcd->regs->hosthead);
-
-       periodic_reinit(ahcd);
-
-       /* use rhsc irqs after khubd is fully initialized */
-       hcd->poll_rh = 1;
-       hcd->uses_new_polling = 1;
-
-#if 0
-       /* wake on ConnectStatusChange, matching external hubs */
-       admhc_writel(ahcd, RH_HS_DRWE, &ahcd->regs->roothub.status);
-#else
-       /* FIXME roothub_write_status (ahcd, ADMHC_RH_DRWE); */
-#endif
-
-       /* Choose the interrupts we care about now, others later on demand */
-       admhc_intr_ack(ahcd, ~0);
-       admhc_intr_enable(ahcd, ADMHC_INTR_INIT);
-
-       admhc_writel(ahcd, ADMHC_RH_NPS | ADMHC_RH_LPSC, &ahcd->regs->rhdesc);
-
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* start controller operations */
-       ahcd->host_control = ADMHC_BUSS_OPER;
-       admhc_writel(ahcd, ahcd->host_control, &ahcd->regs->host_control);
-
-       temp = 20;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_BUSS) != ADMHC_BUSS_OPER) {
-               if (--temp == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to setup operational mode!\n");
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-       hcd->state = HC_STATE_RUNNING;
-
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-#if 0
-       /* FIXME: enabling DMA is always failed here for an unknown reason */
-       admhc_dma_enable(ahcd);
-
-       temp = 200;
-       while ((admhc_readl(ahcd, &ahcd->regs->host_control)
-                       & ADMHC_HC_DMAE) != ADMHC_HC_DMAE) {
-               if (--temp == 0) {
-                       spin_unlock_irq(&ahcd->lock);
-                       admhc_err(ahcd, "unable to enable DMA!\n");
-                       admhc_dump(ahcd, 1);
-                       return -1;
-               }
-               mdelay(1);
-       }
-
-#endif
-
-       spin_unlock_irq(&ahcd->lock);
-
-       mdelay(ADMHC_POTPGT);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* an interrupt happens */
-
-static irqreturn_t admhc_irq(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-       struct admhcd_regs __iomem *regs = ahcd->regs;
-       u32 ints;
-
-       ints = admhc_readl(ahcd, &regs->int_status);
-       if ((ints & ADMHC_INTR_INTA) == 0) {
-               /* no unmasked interrupt status is set */
-               return IRQ_NONE;
-       }
-
-       ints &= admhc_readl(ahcd, &regs->int_enable);
-
-       if (ints & ADMHC_INTR_FATI) {
-               /* e.g. due to PCI Master/Target Abort */
-               admhc_disable(ahcd);
-               admhc_err(ahcd, "Fatal Error, controller disabled\n");
-               admhc_dump(ahcd, 1);
-               admhc_usb_reset(ahcd);
-       }
-
-       if (ints & ADMHC_INTR_BABI) {
-               admhc_intr_disable(ahcd, ADMHC_INTR_BABI);
-               admhc_intr_ack(ahcd, ADMHC_INTR_BABI);
-               admhc_err(ahcd, "Babble Detected\n");
-       }
-
-       if (ints & ADMHC_INTR_INSM) {
-               admhc_vdbg(ahcd, "Root Hub Status Change\n");
-               ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI | ADMHC_INTR_INSM);
-
-               /* NOTE: Vendors didn't always make the same implementation
-                * choices for RHSC.  Many followed the spec; RHSC triggers
-                * on an edge, like setting and maybe clearing a port status
-                * change bit.  With others it's level-triggered, active
-                * until khubd clears all the port status change bits.  We'll
-                * always disable it here and rely on polling until khubd
-                * re-enables it.
-                */
-               admhc_intr_disable(ahcd, ADMHC_INTR_INSM);
-               usb_hcd_poll_rh_status(hcd);
-       } else if (ints & ADMHC_INTR_RESI) {
-               /* For connect and disconnect events, we expect the controller
-                * to turn on RHSC along with RD.  But for remote wakeup events
-                * this might not happen.
-                */
-               admhc_vdbg(ahcd, "Resume Detect\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_RESI);
-               hcd->poll_rh = 1;
-               if (ahcd->autostop) {
-                       spin_lock(&ahcd->lock);
-                       admhc_rh_resume(ahcd);
-                       spin_unlock(&ahcd->lock);
-               } else
-                       usb_hcd_resume_root_hub(hcd);
-       }
-
-       if (ints & ADMHC_INTR_TDC) {
-               admhc_vdbg(ahcd, "Transfer Descriptor Complete\n");
-               admhc_intr_ack(ahcd, ADMHC_INTR_TDC);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_disable(ahcd, ADMHC_INTR_TDC);
-               spin_lock(&ahcd->lock);
-               admhc_td_complete(ahcd);
-               spin_unlock(&ahcd->lock);
-               if (HC_IS_RUNNING(hcd->state))
-                       admhc_intr_enable(ahcd, ADMHC_INTR_TDC);
-       }
-
-       if (ints & ADMHC_INTR_SO) {
-               /* could track INTR_SO to reduce available PCI/... bandwidth */
-               admhc_vdbg(ahcd, "Schedule Overrun\n");
-       }
-
-#if 1
-       spin_lock(&ahcd->lock);
-       if (ahcd->ed_rm_list)
-               finish_unlinks(ahcd, admhc_frame_no(ahcd));
-
-       if ((ints & ADMHC_INTR_SOFI) != 0 && !ahcd->ed_rm_list
-                       && HC_IS_RUNNING(hcd->state))
-               admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-       spin_unlock(&ahcd->lock);
-#else
-       if (ints & ADMHC_INTR_SOFI) {
-               admhc_vdbg(ahcd, "Start Of Frame\n");
-               spin_lock(&ahcd->lock);
-
-               /* handle any pending ED removes */
-               finish_unlinks(ahcd, admhc_frameno(ahcd));
-
-               /* leaving INTR_SOFI enabled when there's still unlinking
-                * to be done in the (next frame).
-                */
-               if ((ahcd->ed_rm_list == NULL) ||
-                       HC_IS_RUNNING(hcd->state) == 0)
-                       /*
-                        * disable INTR_SOFI if there are no unlinking to be
-                        * done (in the next frame)
-                        */
-                       admhc_intr_disable(ahcd, ADMHC_INTR_SOFI);
-
-               spin_unlock(&ahcd->lock);
-       }
-#endif
-
-       if (HC_IS_RUNNING(hcd->state)) {
-               admhc_intr_ack(ahcd, ints);
-               admhc_intr_enable(ahcd, ADMHC_INTR_MIE);
-               admhc_writel_flush(ahcd);
-       }
-
-       return IRQ_HANDLED;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_stop(struct usb_hcd *hcd)
-{
-       struct admhcd *ahcd = hcd_to_admhcd(hcd);
-
-       admhc_dump(ahcd, 1);
-
-       flush_scheduled_work();
-
-       admhc_usb_reset(ahcd);
-       admhc_intr_disable(ahcd, ADMHC_INTR_MIE);
-
-       free_irq(hcd->irq, hcd);
-       hcd->irq = -1;
-
-       remove_debug_files(ahcd);
-       admhc_eds_cleanup(ahcd);
-       admhc_mem_cleanup(ahcd);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_MIPS_ADM5120
-#include "adm5120-drv.c"
-#define PLATFORM_DRIVER                usb_hcd_adm5120_driver
-#endif
-
-#if    !defined(PLATFORM_DRIVER)
-#error "missing bus glue for admhc-hcd"
-#endif
-
-#define DRIVER_INFO DRIVER_DESC " version " DRIVER_VERSION
-
-static int __init admhc_hcd_mod_init(void)
-{
-       int ret = 0;
-
-       if (usb_disabled())
-               return -ENODEV;
-
-       pr_info("%s: " DRIVER_INFO "\n", hcd_name);
-       pr_info("%s: block sizes: ed %Zd td %Zd\n", hcd_name,
-               sizeof (struct ed), sizeof (struct td));
-
-#ifdef DEBUG
-       admhc_debug_root = debugfs_create_dir("admhc", NULL);
-       if (!admhc_debug_root) {
-               ret = -ENOENT;
-               goto error_debug;
-       }
-#endif
-
-#ifdef PLATFORM_DRIVER
-       ret = platform_driver_register(&PLATFORM_DRIVER);
-       if (ret < 0)
-               goto error_platform;
-#endif
-
-       return ret;
-
-#ifdef PLATFORM_DRIVER
-       platform_driver_unregister(&PLATFORM_DRIVER);
-error_platform:
-#endif
-
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-       admhc_debug_root = NULL;
-error_debug:
-#endif
-       return ret;
-}
-module_init(admhc_hcd_mod_init);
-
-static void __exit admhc_hcd_mod_exit(void)
-{
-       platform_driver_unregister(&PLATFORM_DRIVER);
-#ifdef DEBUG
-       debugfs_remove(admhc_debug_root);
-#endif
-}
-module_exit(admhc_hcd_mod_exit);
-
-MODULE_AUTHOR(DRIVER_AUTHOR);
-MODULE_DESCRIPTION(DRIVER_INFO);
-MODULE_VERSION(DRIVER_VERSION);
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-hub.c
deleted file mode 100644 (file)
index 4fd826d..0000000
+++ /dev/null
@@ -1,441 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-hub.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * ADM5120 Root Hub ... the nonsharable stuff
- */
-
-#define dbg_port(hc,label,num,value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_LSDA) ? " LSDA" : "", \
-               (value & ADMHC_PS_PPS) ? " PPS" : "", \
-               (value & ADMHC_PS_PRS) ? " PRS" : "", \
-               (value & ADMHC_PS_POCI) ? " POCI" : "", \
-               (value & ADMHC_PS_PSS) ? " PSS" : "", \
-               \
-               (value & ADMHC_PS_PES) ? " PES" : "", \
-               (value & ADMHC_PS_CCS) ? " CCS" : "" \
-               );
-
-#define dbg_port_write(hc,label,num,value) \
-       admhc_dbg(hc, \
-               "%s port%d " \
-               "= 0x%08x%s%s%s%s%s%s%s%s%s%s%s%s\n", \
-               label, num, value, \
-               (value & ADMHC_PS_PRSC) ? " PRSC" : "", \
-               (value & ADMHC_PS_OCIC) ? " OCIC" : "", \
-               (value & ADMHC_PS_PSSC) ? " PSSC" : "", \
-               (value & ADMHC_PS_PESC) ? " PESC" : "", \
-               (value & ADMHC_PS_CSC) ? " CSC" : "", \
-               \
-               (value & ADMHC_PS_CPP) ? " CPP" : "", \
-               (value & ADMHC_PS_SPP) ? " SPP" : "", \
-               (value & ADMHC_PS_SPR) ? " SPR" : "", \
-               (value & ADMHC_PS_CPS) ? " CPS" : "", \
-               (value & ADMHC_PS_SPS) ? " SPS" : "", \
-               \
-               (value & ADMHC_PS_SPE) ? " SPE" : "", \
-               (value & ADMHC_PS_CPE) ? " CPE" : "" \
-               );
-
-/*-------------------------------------------------------------------------*/
-
-/* hcd->hub_irq_enable() */
-static void admhc_hub_irq_enable(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-
-       spin_lock_irq(&ahcd->lock);
-       if (!ahcd->autostop)
-               del_timer(&hcd->rh_timer);      /* Prevent next poll */
-       admhc_intr_enable(ahcd, ADMHC_INTR_INSM);
-       spin_unlock_irq(&ahcd->lock);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* build "status change" packet (one or two bytes) from HC registers */
-
-static int
-admhc_hub_status_data(struct usb_hcd *hcd, char *buf)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             i, changed = 0, length = 1;
-       int             any_connected = 0;
-       unsigned long   flags;
-       u32             status;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-       if (!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags))
-               goto done;
-
-       /* init status */
-       status = admhc_read_rhdesc(ahcd);
-       if (status & (ADMHC_RH_LPSC | ADMHC_RH_OCIC))
-               buf [0] = changed = 1;
-       else
-               buf [0] = 0;
-       if (ahcd->num_ports > 7) {
-               buf [1] = 0;
-               length++;
-       }
-
-       /* look at each port */
-       for (i = 0; i < ahcd->num_ports; i++) {
-               status = admhc_read_portstatus(ahcd, i);
-
-               /* can't autostop if ports are connected */
-               any_connected |= (status & ADMHC_PS_CCS);
-
-               if (status & (ADMHC_PS_CSC | ADMHC_PS_PESC | ADMHC_PS_PSSC
-                               | ADMHC_PS_OCIC | ADMHC_PS_PRSC)) {
-                       changed = 1;
-                       if (i < 7)
-                           buf [0] |= 1 << (i + 1);
-                       else
-                           buf [1] |= 1 << (i - 7);
-               }
-       }
-
-       hcd->poll_rh = admhc_root_hub_state_changes(ahcd, changed,
-                       any_connected);
-
-done:
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return changed ? length : 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_get_hub_descriptor(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_descriptor *desc = (struct usb_hub_descriptor *)buf;
-       u32 rh = admhc_read_rhdesc(ahcd);
-       u16 temp;
-
-       desc->bDescriptorType = USB_DT_HUB;     /* Hub-descriptor */
-       desc->bPwrOn2PwrGood = ADMHC_POTPGT/2;  /* use default value */
-       desc->bHubContrCurrent = 0x00;          /* 0mA */
-
-       desc->bNbrPorts = ahcd->num_ports;
-       temp = 1 + (ahcd->num_ports / 8);
-       desc->bDescLength = USB_DT_HUB_NONVAR_SIZE + 2 * temp;
-
-       /* FIXME */
-       temp = 0;
-       if (rh & ADMHC_RH_NPS)          /* no power switching? */
-           temp |= 0x0002;
-       if (rh & ADMHC_RH_PSM)          /* per-port power switching? */
-           temp |= 0x0001;
-       if (rh & ADMHC_RH_NOCP)         /* no overcurrent reporting? */
-           temp |= 0x0010;
-       else if (rh & ADMHC_RH_OCPM)    /* per-port overcurrent reporting? */
-           temp |= 0x0008;
-       desc->wHubCharacteristics = (__force __u16)cpu_to_hc16(ahcd, temp);
-
-       /* two bitmaps:  ports removable, and usb 1.0 legacy PortPwrCtrlMask */
-       desc->bitmap[0] = 0;
-       desc->bitmap[0] = ~0;
-
-       return 0;
-}
-
-static int admhc_get_hub_status(struct admhcd *ahcd, char *buf)
-{
-       struct usb_hub_status *hs = (struct usb_hub_status *)buf;
-       u32 t = admhc_read_rhdesc(ahcd);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_RH_LPS) ? HUB_STATUS_LOCAL_POWER : 0;
-       status |= (t & ADMHC_RH_OCI) ? HUB_STATUS_OVERCURRENT : 0;
-
-       change = 0;
-       change |= (t & ADMHC_RH_LPSC) ? HUB_CHANGE_LOCAL_POWER : 0;
-       change |= (t & ADMHC_RH_OCIC) ? HUB_CHANGE_OVERCURRENT : 0;
-
-       hs->wHubStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       hs->wHubChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-static int admhc_get_port_status(struct admhcd *ahcd, unsigned port, char *buf)
-{
-       struct usb_port_status *ps = (struct usb_port_status *)buf;
-       u32 t = admhc_read_portstatus(ahcd, port);
-       u16 status, change;
-
-       status = 0;
-       status |= (t & ADMHC_PS_CCS) ? USB_PORT_STAT_CONNECTION : 0;
-       status |= (t & ADMHC_PS_PES) ? USB_PORT_STAT_ENABLE : 0;
-       status |= (t & ADMHC_PS_PSS) ? USB_PORT_STAT_SUSPEND : 0;
-       status |= (t & ADMHC_PS_POCI) ? USB_PORT_STAT_OVERCURRENT : 0;
-       status |= (t & ADMHC_PS_PRS) ? USB_PORT_STAT_RESET : 0;
-       status |= (t & ADMHC_PS_PPS) ? USB_PORT_STAT_POWER : 0;
-       status |= (t & ADMHC_PS_LSDA) ? USB_PORT_STAT_LOW_SPEED : 0;
-
-       change = 0;
-       change |= (t & ADMHC_PS_CSC) ? USB_PORT_STAT_C_CONNECTION : 0;
-       change |= (t & ADMHC_PS_PESC) ? USB_PORT_STAT_C_ENABLE : 0;
-       change |= (t & ADMHC_PS_PSSC) ? USB_PORT_STAT_C_SUSPEND : 0;
-       change |= (t & ADMHC_PS_OCIC) ? USB_PORT_STAT_C_OVERCURRENT : 0;
-       change |= (t & ADMHC_PS_PRSC) ? USB_PORT_STAT_C_RESET : 0;
-
-       ps->wPortStatus = (__force __u16)cpu_to_hc16(ahcd, status);
-       ps->wPortChange = (__force __u16)cpu_to_hc16(ahcd, change);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifdef CONFIG_USB_OTG
-
-static int admhc_start_port_reset(struct usb_hcd *hcd, unsigned port)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       u32                     status;
-
-       if (!port)
-               return -EINVAL;
-       port--;
-
-       /* start port reset before HNP protocol times out */
-       status = admhc_read_portstatus(ahcd, port);
-       if (!(status & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       /* khubd will finish the reset later */
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_PRS);
-       return 0;
-}
-
-static void start_hnp(struct admhcd *ahcd);
-
-#else
-
-#define        admhc_start_port_reset          NULL
-
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-
-/* See usb 7.1.7.5:  root hubs must issue at least 50 msec reset signaling,
- * not necessarily continuous ... to guard against resume signaling.
- * The short timeout is safe for non-root hubs, and is backward-compatible
- * with earlier Linux hosts.
- */
-#ifdef CONFIG_USB_SUSPEND
-#define        PORT_RESET_MSEC         50
-#else
-#define        PORT_RESET_MSEC         10
-#endif
-
-/* this timer value might be vendor-specific ... */
-#define        PORT_RESET_HW_MSEC      10
-
-/* wrap-aware logic morphed from <linux/jiffies.h> */
-#define tick_before(t1,t2) ((s16)(((s16)(t1))-((s16)(t2))) < 0)
-
-/* called from some task, normally khubd */
-static inline int admhc_port_reset(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "reset port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPR);
-       mdelay(10);
-       admhc_write_portstatus(ahcd, port, (ADMHC_PS_SPE | ADMHC_PS_CSC));
-       mdelay(100);
-
-       return 0;
-}
-
-static inline int admhc_port_enable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "enable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_SPE);
-
-       return 0;
-}
-
-static inline int admhc_port_disable(struct admhcd *ahcd, unsigned port)
-{
-       u32 t;
-
-       admhc_vdbg(ahcd, "disable port%d\n", port);
-       t = admhc_read_portstatus(ahcd, port);
-       if (!(t & ADMHC_PS_CCS))
-               return -ENODEV;
-
-       admhc_write_portstatus(ahcd, port, ADMHC_PS_CPE);
-
-       return 0;
-}
-
-static inline int admhc_port_write(struct admhcd *ahcd, unsigned port,
-               u32 val)
-{
-#ifdef ADMHC_VERBOSE_DEBUG
-       dbg_port_write(ahcd, "write", port, val);
-#endif
-       admhc_write_portstatus(ahcd, port, val);
-
-       return 0;
-}
-
-static int admhc_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue,
-               u16 wIndex, char *buf, u16 wLength)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             ports = hcd_to_bus(hcd)->root_hub->maxchild;
-       int             ret = 0;
-
-       if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-               return -ESHUTDOWN;
-
-       switch (typeReq) {
-       case ClearHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-#if 0                  /* FIXME */
-                       admhc_writel(ahcd, ADMHC_RH_OCIC,
-                                       &ahcd->regs->roothub.status);
-#endif
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case ClearPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_disable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CPP);
-                       break;
-               case USB_PORT_FEAT_C_CONNECTION:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_CSC);
-                       break;
-               case USB_PORT_FEAT_C_ENABLE:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PESC);
-                       break;
-               case USB_PORT_FEAT_C_SUSPEND:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PSSC);
-                       break;
-               case USB_PORT_FEAT_C_OVER_CURRENT:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_OCIC);
-                       break;
-               case USB_PORT_FEAT_C_RESET:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_PRSC);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case GetHubDescriptor:
-               ret = admhc_get_hub_descriptor(ahcd, buf);
-               break;
-       case GetHubStatus:
-               ret = admhc_get_hub_status(ahcd, buf);
-               break;
-       case GetPortStatus:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               ret = admhc_get_port_status(ahcd, wIndex, buf);
-               break;
-       case SetHubFeature:
-               switch (wValue) {
-               case C_HUB_OVER_CURRENT:
-                       /* FIXME:  this can be cleared, yes? */
-               case C_HUB_LOCAL_POWER:
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-       case SetPortFeature:
-               if (!wIndex || wIndex > ports)
-                       goto error;
-               wIndex--;
-
-               switch (wValue) {
-               case USB_PORT_FEAT_ENABLE:
-                       ret = admhc_port_enable(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_RESET:
-                       ret = admhc_port_reset(ahcd, wIndex);
-                       break;
-               case USB_PORT_FEAT_SUSPEND:
-#ifdef CONFIG_USB_OTG
-                       if (hcd->self.otg_port == (wIndex + 1)
-                                       && hcd->self.b_hnp_enable)
-                               start_hnp(ahcd);
-                       else
-#endif
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPS);
-                       break;
-               case USB_PORT_FEAT_POWER:
-                       ret = admhc_port_write(ahcd, wIndex, ADMHC_PS_SPP);
-                       break;
-               default:
-                       goto error;
-               }
-               break;
-
-       default:
-error:
-               /* "protocol stall" on error */
-               ret = -EPIPE;
-       }
-
-       return ret;
-}
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-mem.c
deleted file mode 100644 (file)
index 3e4b2d9..0000000
+++ /dev/null
@@ -1,202 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-mem.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * OHCI deals with three types of memory:
- *     - data used only by the HCD ... kmalloc is fine
- *     - async and periodic schedules, shared by HC and HCD ... these
- *       need to use dma_pool or dma_alloc_coherent
- *     - driver buffers, read/written by HC ... the hcd glue or the
- *       device driver provides us with dma addresses
- *
- * There's also "register" data, which is memory mapped.
- * No memory seen by this driver (or any HCD) may be paged out.
- */
-
-/*-------------------------------------------------------------------------*/
-
-static void admhc_hcd_init(struct admhcd *ahcd)
-{
-       ahcd->next_statechange = jiffies;
-       spin_lock_init(&ahcd->lock);
-       INIT_LIST_HEAD(&ahcd->pending);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static int admhc_mem_init(struct admhcd *ahcd)
-{
-       ahcd->td_cache = dma_pool_create("admhc_td",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct td),
-               TD_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->td_cache)
-               goto err;
-
-       ahcd->ed_cache = dma_pool_create("admhc_ed",
-               admhcd_to_hcd(ahcd)->self.controller,
-               sizeof(struct ed),
-               ED_ALIGN, /* byte alignment */
-               0 /* no page-crossing issues */
-               );
-       if (!ahcd->ed_cache)
-               goto err_td_cache;
-
-       return 0;
-
-err_td_cache:
-       dma_pool_destroy(ahcd->td_cache);
-       ahcd->td_cache = NULL;
-err:
-       return -ENOMEM;
-}
-
-static void admhc_mem_cleanup(struct admhcd *ahcd)
-{
-       if (ahcd->td_cache) {
-               dma_pool_destroy(ahcd->td_cache);
-               ahcd->td_cache = NULL;
-       }
-
-       if (ahcd->ed_cache) {
-               dma_pool_destroy(ahcd->ed_cache);
-               ahcd->ed_cache = NULL;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* ahcd "done list" processing needs this mapping */
-static inline struct td *dma_to_td(struct admhcd *ahcd, dma_addr_t td_dma)
-{
-       struct td *td;
-
-       td_dma &= TD_MASK;
-       td = ahcd->td_hash[TD_HASH_FUNC(td_dma)];
-       while (td && td->td_dma != td_dma)
-               td = td->td_hash;
-
-       return td;
-}
-
-/* TDs ... */
-static struct td *td_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct td       *td;
-
-       td = dma_pool_alloc(ahcd->td_cache, mem_flags, &dma);
-       if (!td)
-               return NULL;
-
-       /* in case ahcd fetches it, make it look dead */
-       memset(td, 0, sizeof *td);
-       td->hwNextTD = cpu_to_hc32(ahcd, dma);
-       td->td_dma = dma;
-       /* hashed in td_fill */
-
-       return td;
-}
-
-static void td_free(struct admhcd *ahcd, struct td *td)
-{
-       struct td **prev = &ahcd->td_hash[TD_HASH_FUNC(td->td_dma)];
-
-       while (*prev && *prev != td)
-               prev = &(*prev)->td_hash;
-       if (*prev)
-               *prev = td->td_hash;
-#if 0
-       /* TODO: remove */
-       else if ((td->hwINFO & cpu_to_hc32(ahcd, TD_DONE)) != 0)
-               admhc_dbg (ahcd, "no hash for td %p\n", td);
-#else
-       else if ((td->flags & TD_FLAG_DONE) != 0)
-               admhc_dbg (ahcd, "no hash for td %p\n", td);
-#endif
-       dma_pool_free(ahcd->td_cache, td, td->td_dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* EDs ... */
-static struct ed *ed_alloc(struct admhcd *ahcd, gfp_t mem_flags)
-{
-       dma_addr_t      dma;
-       struct ed       *ed;
-
-       ed = dma_pool_alloc(ahcd->ed_cache, mem_flags, &dma);
-       if (!ed)
-               return NULL;
-
-       memset(ed, 0, sizeof(*ed));
-       ed->dma = dma;
-
-       INIT_LIST_HEAD(&ed->td_list);
-       INIT_LIST_HEAD(&ed->urb_list);
-
-       return ed;
-}
-
-static void ed_free(struct admhcd *ahcd, struct ed *ed)
-{
-       dma_pool_free(ahcd->ed_cache, ed, ed->dma);
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* URB priv ... */
-static void urb_priv_free(struct admhcd *ahcd, struct urb_priv *urb_priv)
-{
-       int i;
-
-       for (i = 0; i < urb_priv->td_cnt; i++)
-               if (urb_priv->td[i])
-                       td_free(ahcd, urb_priv->td[i]);
-
-       list_del(&urb_priv->pending);
-       kfree(urb_priv);
-}
-
-static struct urb_priv *urb_priv_alloc(struct admhcd *ahcd, int num_tds,
-               gfp_t mem_flags)
-{
-       struct urb_priv *priv;
-
-       /* allocate the private part of the URB */
-       priv = kzalloc(sizeof(*priv) + sizeof(struct td) * num_tds, mem_flags);
-       if (!priv)
-               goto err;
-
-       /* allocate the TDs (deferring hash chain updates) */
-       for (priv->td_cnt = 0; priv->td_cnt < num_tds; priv->td_cnt++) {
-               priv->td[priv->td_cnt] = td_alloc(ahcd, mem_flags);
-               if (priv->td[priv->td_cnt] == NULL)
-                       goto err_free;
-       }
-
-       INIT_LIST_HEAD(&priv->pending);
-
-       return priv;
-
-err_free:
-       urb_priv_free(ahcd, priv);
-err:
-       return NULL;
-}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-pm.c
deleted file mode 100644 (file)
index c88e448..0000000
+++ /dev/null
@@ -1,445 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from fragments of the OHCI driver.
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#define OHCI_SCHED_ENABLES \
-       (OHCI_CTRL_CLE|OHCI_CTRL_BLE|OHCI_CTRL_PLE|OHCI_CTRL_IE)
-
-#ifdef CONFIG_PM
-static int admhc_restart(struct admhcd *ahcd);
-
-static int admhc_rh_suspend(struct admhcd *ahcd, int autostop)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       int                     status = 0;
-
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_RESUME:
-               admhc_dbg(ahcd, "resume/suspend?\n");
-               ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-               ahcd->hc_control |= OHCI_USB_RESET;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               /* FALL THROUGH */
-       case OHCI_USB_RESET:
-               status = -EBUSY;
-               admhc_dbg(ahcd, "needs reinit!\n");
-               goto done;
-       case OHCI_USB_SUSPEND:
-               if (!ahcd->autostop) {
-                       admhc_dbg(ahcd, "already suspended\n");
-                       goto done;
-               }
-       }
-       admhc_dbg(ahcd, "%s root hub\n",
-                       autostop ? "auto-stop" : "suspend");
-
-       /* First stop any processing */
-       if (!autostop && (ahcd->hc_control & OHCI_SCHED_ENABLES)) {
-               ahcd->hc_control &= ~OHCI_SCHED_ENABLES;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->intrstatus);
-
-               /* sched disables take effect on the next frame,
-                * then the last WDH could take 6+ msec
-                */
-               admhc_dbg(ahcd, "stopping schedules ...\n");
-               ahcd->autostop = 0;
-               spin_unlock_irq (&ahcd->lock);
-               msleep (8);
-               spin_lock_irq(&ahcd->lock);
-       }
-       dl_done_list (ahcd);
-       finish_unlinks (ahcd, admhc_frame_no(ahcd));
-
-       /* maybe resume can wake root hub */
-       if (device_may_wakeup(&admhcd_to_hcd(ahcd)->self.root_hub->dev) ||
-                       autostop)
-               ahcd->hc_control |= OHCI_CTRL_RWE;
-       else {
-               admhc_writel(ahcd, OHCI_INTR_RHSC, &ahcd->regs->intrdisable);
-               ahcd->hc_control &= ~OHCI_CTRL_RWE;
-       }
-
-       /* Suspend hub ... this is the "global (to this bus) suspend" mode,
-        * which doesn't imply ports will first be individually suspended.
-        */
-       ahcd->hc_control &= ~OHCI_CTRL_HCFS;
-       ahcd->hc_control |= OHCI_USB_SUSPEND;
-       admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* no resumes until devices finish suspending */
-       if (!autostop) {
-               ahcd->next_statechange = jiffies + msecs_to_jiffies (5);
-               ahcd->autostop = 0;
-       }
-
-done:
-       return status;
-}
-
-static inline struct ed *find_head(struct ed *ed)
-{
-       /* for bulk and control lists */
-       while (ed->ed_prev)
-               ed = ed->ed_prev;
-       return ed;
-}
-
-/* caller has locked the root hub */
-static int admhc_rh_resume(struct admhcd *ahcd)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       struct usb_hcd          *hcd = admhcd_to_hcd (ahcd);
-       u32                     temp, enables;
-       int                     status = -EINPROGRESS;
-       int                     autostopped = ahcd->autostop;
-
-       ahcd->autostop = 0;
-       ahcd->hc_control = admhc_readl(ahcd, &ahcd->regs->control);
-
-       if (ahcd->hc_control & (OHCI_CTRL_IR | OHCI_SCHED_ENABLES)) {
-               /* this can happen after resuming a swsusp snapshot */
-               if (hcd->state == HC_STATE_RESUMING) {
-                       admhc_dbg(ahcd, "BIOS/SMM active, control %03x\n",
-                                       ahcd->hc_control);
-                       status = -EBUSY;
-               /* this happens when pmcore resumes HC then root */
-               } else {
-                       admhc_dbg(ahcd, "duplicate resume\n");
-                       status = 0;
-               }
-       } else switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-       case OHCI_USB_SUSPEND:
-               ahcd->hc_control &= ~(OHCI_CTRL_HCFS|OHCI_SCHED_ENABLES);
-               ahcd->hc_control |= OHCI_USB_RESUME;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-               admhc_dbg(ahcd, "%s root hub\n",
-                               autostopped ? "auto-start" : "resume");
-               break;
-       case OHCI_USB_RESUME:
-               /* HCFS changes sometime after INTR_RD */
-               admhc_dbg(ahcd, "%swakeup root hub\n",
-                               autostopped ? "auto-" : "");
-               break;
-       case OHCI_USB_OPER:
-               /* this can happen after resuming a swsusp snapshot */
-               admhc_dbg(ahcd, "snapshot resume? reinit\n");
-               status = -EBUSY;
-               break;
-       default:                /* RESET, we lost power */
-               admhc_dbg(ahcd, "lost power\n");
-               status = -EBUSY;
-       }
-       if (status == -EBUSY) {
-               if (!autostopped) {
-                       spin_unlock_irq (&ahcd->lock);
-                       (void) ahcd_init (ahcd);
-                       status = admhc_restart (ahcd);
-                       spin_lock_irq(&ahcd->lock);
-               }
-               return status;
-       }
-       if (status != -EINPROGRESS)
-               return status;
-       if (autostopped)
-               goto skip_resume;
-       spin_unlock_irq (&ahcd->lock);
-
-       /* Some controllers (lucent erratum) need extra-long delays */
-       msleep (20 /* usb 11.5.1.10 */ + 12 /* 32 msec counter */ + 1);
-
-       temp = admhc_readl(ahcd, &ahcd->regs->control);
-       temp &= OHCI_CTRL_HCFS;
-       if (temp != OHCI_USB_RESUME) {
-               admhc_err (ahcd, "controller won't resume\n");
-               spin_lock_irq(&ahcd->lock);
-               return -EBUSY;
-       }
-
-       /* disable old schedule state, reinit from scratch */
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_controlcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkhead);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_bulkcurrent);
-       admhc_writel(ahcd, 0, &ahcd->regs->ed_periodcurrent);
-       admhc_writel(ahcd, (u32) ahcd->hcca_dma, &ahcd->ahcd->regs->hcca);
-
-       /* Sometimes PCI D3 suspend trashes frame timings ... */
-       periodic_reinit(ahcd);
-
-       /* the following code is executed with ahcd->lock held and
-        * irqs disabled if and only if autostopped is true
-        */
-
-skip_resume:
-       /* interrupts might have been disabled */
-       admhc_writel(ahcd, OHCI_INTR_INIT, &ahcd->regs->int_enable);
-       if (ahcd->ed_rm_list)
-               admhc_writel(ahcd, OHCI_INTR_SF, &ahcd->regs->int_enable);
-
-       /* Then re-enable operations */
-       admhc_writel(ahcd, OHCI_USB_OPER, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-       if (!autostopped)
-               msleep (3);
-
-       temp = ahcd->hc_control;
-       temp &= OHCI_CTRL_RWC;
-       temp |= OHCI_CONTROL_INIT | OHCI_USB_OPER;
-       ahcd->hc_control = temp;
-       admhc_writel(ahcd, temp, &ahcd->regs->control);
-       (void) admhc_readl(ahcd, &ahcd->regs->control);
-
-       /* TRSMRCY */
-       if (!autostopped) {
-               msleep (10);
-               spin_lock_irq(&ahcd->lock);
-       }
-       /* now ahcd->lock is always held and irqs are always disabled */
-
-       /* keep it alive for more than ~5x suspend + resume costs */
-       ahcd->next_statechange = jiffies + STATECHANGE_DELAY;
-
-       /* maybe turn schedules back on */
-       enables = 0;
-       temp = 0;
-       if (!ahcd->ed_rm_list) {
-               if (ahcd->ed_controltail) {
-                       admhc_writel(ahcd,
-                                       find_head (ahcd->ed_controltail)->dma,
-                                       &ahcd->regs->ed_controlhead);
-                       enables |= OHCI_CTRL_CLE;
-                       temp |= OHCI_CLF;
-               }
-               if (ahcd->ed_bulktail) {
-                       admhc_writel(ahcd, find_head (ahcd->ed_bulktail)->dma,
-                               &ahcd->regs->ed_bulkhead);
-                       enables |= OHCI_CTRL_BLE;
-                       temp |= OHCI_BLF;
-               }
-       }
-       if (hcd->self.bandwidth_isoc_reqs || hcd->self.bandwidth_int_reqs)
-               enables |= OHCI_CTRL_PLE|OHCI_CTRL_IE;
-       if (enables) {
-               admhc_dbg(ahcd, "restarting schedules ... %08x\n", enables);
-               ahcd->hc_control |= enables;
-               admhc_writel(ahcd, ahcd->hc_control, &ahcd->ahcd->regs->control);
-               if (temp)
-                       admhc_writel(ahcd, temp, &ahcd->regs->cmdstatus);
-               (void) admhc_readl(ahcd, &ahcd->regs->control);
-       }
-
-       return 0;
-}
-
-static int admhc_bus_suspend(struct usb_hcd *hcd)
-{
-       struct admhcd   *ahcd = hcd_to_admhcd(hcd);
-       int             rc;
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_suspend(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-       return rc;
-}
-
-static int admhc_bus_resume(struct usb_hcd *hcd)
-{
-       struct admhcd           *ahcd = hcd_to_admhcd(hcd);
-       int                     rc;
-
-       if (time_before(jiffies, ahcd->next_statechange))
-               msleep(5);
-
-       spin_lock_irq(&ahcd->lock);
-
-       if (unlikely(!test_bit(HCD_FLAG_HW_ACCESSIBLE, &hcd->flags)))
-               rc = -ESHUTDOWN;
-       else
-               rc = admhc_rh_resume(ahcd);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* poll until we know a device is connected or we autostop */
-       if (rc == 0)
-               usb_hcd_poll_rh_status(hcd);
-       return rc;
-}
-
-/* Carry out polling-, autostop-, and autoresume-related state changes */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       int     poll_rh = 1;
-
-       switch (ahcd->hc_control & OHCI_CTRL_HCFS) {
-
-       case OHCI_USB_OPER:
-               /* keep on polling until we know a device is connected
-                * and RHSC is enabled */
-               if (!ahcd->autostop) {
-                       if (any_connected ||
-                                       !device_may_wakeup(&admhcd_to_hcd(ahcd)
-                                               ->self.root_hub->dev)) {
-                               if (admhc_readl(ahcd, &ahcd->regs->int_enable) &
-                                               OHCI_INTR_RHSC)
-                                       poll_rh = 0;
-                       } else {
-                               ahcd->autostop = 1;
-                               ahcd->next_statechange = jiffies + HZ;
-                       }
-
-               /* if no devices have been attached for one second, autostop */
-               } else {
-                       if (changed || any_connected) {
-                               ahcd->autostop = 0;
-                               ahcd->next_statechange = jiffies +
-                                               STATECHANGE_DELAY;
-                       } else if (time_after_eq(jiffies,
-                                               ahcd->next_statechange)
-                                       && !ahcd->ed_rm_list
-                                       && !(ahcd->hc_control &
-                                               OHCI_SCHED_ENABLES)) {
-                               ahcd_rh_suspend(ahcd, 1);
-                       }
-               }
-               break;
-
-       /* if there is a port change, autostart or ask to be resumed */
-       case OHCI_USB_SUSPEND:
-       case OHCI_USB_RESUME:
-               if (changed) {
-                       if (ahcd->autostop)
-                               admhc_rh_resume(ahcd);
-                       else
-                               usb_hcd_resume_root_hub(admhcd_to_hcd(ahcd));
-               } else {
-                       /* everything is idle, no need for polling */
-                       poll_rh = 0;
-               }
-               break;
-       }
-       return poll_rh;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* must not be called from interrupt context */
-static int admhc_restart(struct admhcd *ahcd)
-{
-       int temp;
-       int i;
-       struct urb_priv *priv;
-
-       /* mark any devices gone, so they do nothing till khubd disconnects.
-        * recycle any "live" eds/tds (and urbs) right away.
-        * later, khubd disconnect processing will recycle the other state,
-        * (either as disconnect/reconnect, or maybe someday as a reset).
-        */
-       spin_lock_irq(&ahcd->lock);
-       admhc_disable(ahcd);
-       usb_root_hub_lost_power(admhcd_to_hcd(ahcd)->self.root_hub);
-       if (!list_empty(&ahcd->pending))
-               admhc_dbg(ahcd, "abort schedule...\n");
-               list_for_each_entry(priv, &ahcd->pending, pending) {
-               struct urb      *urb = priv->td[0]->urb;
-               struct ed       *ed = priv->ed;
-
-               switch (ed->state) {
-               case ED_OPER:
-                       ed->state = ED_UNLINK;
-                       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-                       ed_deschedule (ahcd, ed);
-
-                       ed->ed_next = ahcd->ed_rm_list;
-                       ed->ed_prev = NULL;
-                       ahcd->ed_rm_list = ed;
-                       /* FALLTHROUGH */
-               case ED_UNLINK:
-                       break;
-               default:
-                       admhc_dbg(ahcd, "bogus ed %p state %d\n",
-                                       ed, ed->state);
-               }
-
-               if (!urb->unlinked)
-                       urb->unlinked = -ESHUTDOWN;
-       }
-       finish_unlinks(ahcd, 0);
-       spin_unlock_irq(&ahcd->lock);
-
-       /* paranoia, in case that didn't work: */
-
-       /* empty the interrupt branches */
-       for (i = 0; i < NUM_INTS; i++) ahcd->load[i] = 0;
-       for (i = 0; i < NUM_INTS; i++) ahcd->hcca->int_table[i] = 0;
-
-       /* no EDs to remove */
-       ahcd->ed_rm_list = NULL;
-
-       /* empty control and bulk lists */
-       ahcd->ed_controltail = NULL;
-       ahcd->ed_bulktail    = NULL;
-
-       if ((temp = admhc_run(ahcd)) < 0) {
-               admhc_err(ahcd, "can't restart, %d\n", temp);
-               return temp;
-       } else {
-               /* here we "know" root ports should always stay powered,
-                * and that if we try to turn them back on the root hub
-                * will respond to CSC processing.
-                */
-               i = ahcd->num_ports;
-               while (i--)
-                       admhc_writel(ahcd, RH_PS_PSS,
-                               &ahcd->regs->portstatus[i]);
-               admhc_dbg(ahcd, "restart complete\n");
-       }
-       return 0;
-}
-
-#else  /* CONFIG_PM */
-
-static inline int admhc_rh_resume(struct admhcd *ahcd)
-{
-       return 0;
-}
-
-/* Carry out polling-related state changes.
- * autostop isn't used when CONFIG_PM is turned off.
- */
-static int admhc_root_hub_state_changes(struct admhcd *ahcd, int changed,
-               int any_connected)
-{
-       int     poll_rh = 1;
-
-       /* keep on polling until RHSC is enabled */
-       if (admhc_readl(ahcd, &ahcd->regs->int_enable) & ADMHC_INTR_INSM)
-               poll_rh = 0;
-
-       return poll_rh;
-}
-
-#endif /* CONFIG_PM */
-
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c b/target/linux/adm5120/files/drivers/usb/host/adm5120-q.c
deleted file mode 100644 (file)
index 632140b..0000000
+++ /dev/null
@@ -1,955 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci-q.c
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#include <linux/irq.h>
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * URB goes back to driver, and isn't reissued.
- * It's completely gone from HC data structures.
- * PRECONDITION:  ahcd lock held, irqs blocked.
- */
-static void
-finish_urb(struct admhcd *ahcd, struct urb *urb, int status)
-__releases(ahcd->lock)
-__acquires(ahcd->lock)
-{
-       urb_priv_free(ahcd, urb->hcpriv);
-
-       if (likely(status == -EINPROGRESS))
-               status = 0;
-
-       switch (usb_pipetype(urb->pipe)) {
-       case PIPE_ISOCHRONOUS:
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs--;
-               break;
-       case PIPE_INTERRUPT:
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs--;
-               break;
-       }
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       urb_print(ahcd, urb, "RET", usb_pipeout (urb->pipe), status);
-#endif
-
-       /* urb->complete() can reenter this HCD */
-       usb_hcd_unlink_urb_from_ep(admhcd_to_hcd(ahcd), urb);
-       spin_unlock(&ahcd->lock);
-       usb_hcd_giveback_urb(admhcd_to_hcd(ahcd), urb, status);
-       spin_lock(&ahcd->lock);
-}
-
-
-/*-------------------------------------------------------------------------*
- * ED handling functions
- *-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* search for the right schedule branch to use for a periodic ed.
- * does some load balancing; returns the branch, or negative errno.
- */
-static int balance(struct admhcd *ahcd, int interval, int load)
-{
-       int     i, branch = -ENOSPC;
-
-       /* iso periods can be huge; iso tds specify frame numbers */
-       if (interval > NUM_INTS)
-               interval = NUM_INTS;
-
-       /* search for the least loaded schedule branch of that period
-        * that has enough bandwidth left unreserved.
-        */
-       for (i = 0; i < interval ; i++) {
-               if (branch < 0 || ahcd->load [branch] > ahcd->load [i]) {
-                       int     j;
-
-                       /* usb 1.1 says 90% of one frame */
-                       for (j = i; j < NUM_INTS; j += interval) {
-                               if ((ahcd->load [j] + load) > 900)
-                                       break;
-                       }
-                       if (j < NUM_INTS)
-                               continue;
-                       branch = i;
-               }
-       }
-       return branch;
-}
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* both iso and interrupt requests have periods; this routine puts them
- * into the schedule tree in the apppropriate place.  most iso devices use
- * 1msec periods, but that's not required.
- */
-static void periodic_link (struct admhcd *ahcd, struct ed *ed)
-{
-       unsigned        i;
-
-       admhc_vdbg (ahcd, "link %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       **prev = &ahcd->periodic [i];
-               __hc32          *prev_p = &ahcd->hcca->int_table [i];
-               struct ed       *here = *prev;
-
-               /* sorting each branch by period (slow before fast)
-                * lets us share the faster parts of the tree.
-                * (plus maybe: put interrupt eds before iso)
-                */
-               while (here && ed != here) {
-                       if (ed->interval > here->interval)
-                               break;
-                       prev = &here->ed_next;
-                       prev_p = &here->hwNextED;
-                       here = *prev;
-               }
-               if (ed != here) {
-                       ed->ed_next = here;
-                       if (here)
-                               ed->hwNextED = *prev_p;
-                       wmb ();
-                       *prev = ed;
-                       *prev_p = cpu_to_hc32(ahcd, ed->dma);
-                       wmb();
-               }
-               ahcd->load [i] += ed->load;
-       }
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated += ed->load / ed->interval;
-}
-#endif
-
-/* link an ed into the HC chain */
-
-static int ed_schedule(struct admhcd *ahcd, struct ed *ed)
-{
-       struct ed *old_tail;
-
-       if (admhcd_to_hcd(ahcd)->state == HC_STATE_QUIESCING)
-               return -EAGAIN;
-
-       ed->state = ED_OPER;
-
-       old_tail = ahcd->ed_tails[ed->type];
-
-       ed->ed_next = old_tail->ed_next;
-       if (ed->ed_next) {
-               ed->ed_next->ed_prev = ed;
-               ed->hwNextED = cpu_to_hc32(ahcd, ed->ed_next->dma);
-       }
-       ed->ed_prev = old_tail;
-
-       old_tail->ed_next = ed;
-       old_tail->hwNextED = cpu_to_hc32(ahcd, ed->dma);
-
-       ahcd->ed_tails[ed->type] = ed;
-
-       admhc_dma_enable(ahcd);
-
-       return 0;
-}
-
-/*-------------------------------------------------------------------------*/
-
-#if 0  /* FIXME */
-/* scan the periodic table to find and unlink this ED */
-static void periodic_unlink (struct admhcd *ahcd, struct ed *ed)
-{
-       int     i;
-
-       for (i = ed->branch; i < NUM_INTS; i += ed->interval) {
-               struct ed       *temp;
-               struct ed       **prev = &ahcd->periodic [i];
-               __hc32          *prev_p = &ahcd->hcca->int_table [i];
-
-               while (*prev && (temp = *prev) != ed) {
-                       prev_p = &temp->hwNextED;
-                       prev = &temp->ed_next;
-               }
-               if (*prev) {
-                       *prev_p = ed->hwNextED;
-                       *prev = ed->ed_next;
-               }
-               ahcd->load [i] -= ed->load;
-       }
-
-       admhcd_to_hcd(ahcd)->self.bandwidth_allocated -= ed->load / ed->interval;
-       admhc_vdbg (ahcd, "unlink %sed %p branch %d [%dus.], interval %d\n",
-               (ed->hwINFO & cpu_to_hc32(ahcd, ED_ISO)) ? "iso " : "",
-               ed, ed->branch, ed->load, ed->interval);
-}
-#endif
-
-/* unlink an ed from the HC chain.
- * just the link to the ed is unlinked.
- * the link from the ed still points to another operational ed or 0
- * so the HC can eventually finish the processing of the unlinked ed
- * (assuming it already started that, which needn't be true).
- *
- * ED_UNLINK is a transient state: the HC may still see this ED, but soon
- * it won't.  ED_SKIP means the HC will finish its current transaction,
- * but won't start anything new.  The TD queue may still grow; device
- * drivers don't know about this HCD-internal state.
- *
- * When the HC can't see the ED, something changes ED_UNLINK to one of:
- *
- *  - ED_OPER: when there's any request queued, the ED gets rescheduled
- *    immediately.  HC should be working on them.
- *
- *  - ED_IDLE:  when there's no TD queue. there's no reason for the HC
- *    to care about this ED; safe to disable the endpoint.
- *
- * When finish_unlinks() runs later, after SOF interrupt, it will often
- * complete one or more URB unlinks before making that state change.
- */
-static void ed_deschedule(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-DESCHED", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->state = ED_UNLINK;
-
-       /* remove this ED from the HC list */
-       ed->ed_prev->hwNextED = ed->hwNextED;
-
-       /* and remove it from our list also */
-       ed->ed_prev->ed_next = ed->ed_next;
-
-       if (ed->ed_next)
-               ed->ed_next->ed_prev = ed->ed_prev;
-
-       if (ahcd->ed_tails[ed->type] == ed)
-               ahcd->ed_tails[ed->type] = ed->ed_prev;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static struct ed *ed_create(struct admhcd *ahcd, unsigned int type, u32 info)
-{
-       struct ed *ed;
-       struct td *td;
-
-       ed = ed_alloc(ahcd, GFP_ATOMIC);
-       if (!ed)
-               goto err;
-
-       /* dummy td; end of td list for this ed */
-       td = td_alloc(ahcd, GFP_ATOMIC);
-       if (!td)
-               goto err_free_ed;
-
-       switch (type) {
-       case PIPE_INTERRUPT:
-               info |= ED_INT;
-               break;
-       case PIPE_ISOCHRONOUS:
-               info |= ED_ISO;
-               break;
-       }
-
-       ed->dummy = td;
-       ed->state = ED_IDLE;
-       ed->type = type;
-
-       ed->hwINFO = cpu_to_hc32(ahcd, info);
-       ed->hwTailP = cpu_to_hc32(ahcd, td->td_dma);
-       ed->hwHeadP = ed->hwTailP;      /* ED_C, ED_H zeroed */
-
-       return ed;
-
-err_free_ed:
-       ed_free(ahcd, ed);
-err:
-       return NULL;
-}
-
-/* get and maybe (re)init an endpoint. init _should_ be done only as part
- * of enumeration, usb_set_configuration() or usb_set_interface().
- */
-static struct ed *ed_get(struct admhcd *ahcd,  struct usb_host_endpoint *ep,
-       struct usb_device *udev, unsigned int pipe, int interval)
-{
-       struct ed               *ed;
-       unsigned long           flags;
-
-       spin_lock_irqsave(&ahcd->lock, flags);
-
-       ed = ep->hcpriv;
-       if (!ed) {
-               u32             info;
-
-               /* FIXME: usbcore changes dev->devnum before SET_ADDRESS
-                * suceeds ... otherwise we wouldn't need "pipe".
-                */
-               info = usb_pipedevice(pipe);
-               info |= (ep->desc.bEndpointAddress & ~USB_DIR_IN) << ED_EN_SHIFT;
-               info |= le16_to_cpu(ep->desc.wMaxPacketSize) << ED_MPS_SHIFT;
-               if (udev->speed == USB_SPEED_FULL)
-                       info |= ED_SPEED_FULL;
-
-               ed = ed_create(ahcd, usb_pipetype(pipe), info);
-               if (ed)
-                       ep->hcpriv = ed;
-       }
-
-       spin_unlock_irqrestore(&ahcd->lock, flags);
-
-       return ed;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* request unlinking of an endpoint from an operational HC.
- * put the ep on the rm_list
- * real work is done at the next start frame (SOFI) hardware interrupt
- * caller guarantees HCD is running, so hardware access is safe,
- * and that ed->state is ED_OPER
- */
-static void start_ed_unlink(struct admhcd *ahcd, struct ed *ed)
-{
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "ED-UNLINK", ed, 1);
-#endif
-
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_DEQUEUE);
-       ed_deschedule(ahcd, ed);
-
-       /* add this ED into the remove list */
-       ed->ed_rm_next = ahcd->ed_rm_list;
-       ahcd->ed_rm_list = ed;
-
-       /* enable SOF interrupt */
-       admhc_intr_ack(ahcd, ADMHC_INTR_SOFI);
-       admhc_intr_enable(ahcd, ADMHC_INTR_SOFI);
-       /* flush those writes */
-       admhc_writel_flush(ahcd);
-
-       /* SOF interrupt might get delayed; record the frame counter value that
-        * indicates when the HC isn't looking at it, so concurrent unlinks
-        * behave.  frame_no wraps every 2^16 msec, and changes right before
-        * SOF is triggered.
-        */
-       ed->tick = admhc_frame_no(ahcd) + 1;
-}
-
-/*-------------------------------------------------------------------------*
- * TD handling functions
- *-------------------------------------------------------------------------*/
-
-/* enqueue next TD for this URB (OHCI spec 5.2.8.2) */
-
-static void
-td_fill(struct admhcd *ahcd, u32 info, dma_addr_t data, int len,
-       struct urb *urb, int index)
-{
-       struct td               *td, *td_pt;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       int                     hash;
-       u32                     cbl = 0;
-
-#if 1
-       if (index == (urb_priv->td_cnt - 1) &&
-                       ((urb->transfer_flags & URB_NO_INTERRUPT) == 0))
-               cbl |= TD_IE;
-#else
-       if (index == (urb_priv->td_cnt - 1))
-               cbl |= TD_IE;
-#endif
-
-       /* use this td as the next dummy */
-       td_pt = urb_priv->td[index];
-
-       /* fill the old dummy TD */
-       td = urb_priv->td[index] = urb_priv->ed->dummy;
-       urb_priv->ed->dummy = td_pt;
-
-       td->ed = urb_priv->ed;
-       td->next_dl_td = NULL;
-       td->index = index;
-       td->urb = urb;
-       td->data_dma = data;
-       if (!len)
-               data = 0;
-
-       if (data)
-               cbl |= (len & TD_BL_MASK);
-
-       info |= TD_OWN;
-
-       /* setup hardware specific fields */
-       td->hwINFO = cpu_to_hc32(ahcd, info);
-       td->hwDBP = cpu_to_hc32(ahcd, data);
-       td->hwCBL = cpu_to_hc32(ahcd, cbl);
-       td->hwNextTD = cpu_to_hc32(ahcd, td_pt->td_dma);
-
-       /* append to queue */
-       list_add_tail(&td->td_list, &td->ed->td_list);
-
-       /* hash it for later reverse mapping */
-       hash = TD_HASH_FUNC(td->td_dma);
-       td->td_hash = ahcd->td_hash[hash];
-       ahcd->td_hash[hash] = td;
-
-       /* HC might read the TD (or cachelines) right away ... */
-       wmb();
-       td->ed->hwTailP = td->hwNextTD;
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* Prepare all TDs of a transfer, and queue them onto the ED.
- * Caller guarantees HC is active.
- * Usually the ED is already on the schedule, so TDs might be
- * processed as soon as they're queued.
- */
-static void td_submit_urb(struct admhcd *ahcd, struct urb *urb)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       dma_addr_t      data;
-       int             data_len = urb->transfer_buffer_length;
-       int             cnt = 0;
-       u32             info = 0;
-       int             is_out = usb_pipeout(urb->pipe);
-       u32             toggle = 0;
-
-       /* OHCI handles the bulk/interrupt data toggles itself.  We just
-        * use the device toggle bits for resetting, and rely on the fact
-        * that resetting toggle is meaningless if the endpoint is active.
-        */
-
-       if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), is_out)) {
-               toggle = TD_T_CARRY;
-       } else {
-               toggle = TD_T_DATA0;
-               usb_settoggle(urb->dev, usb_pipeendpoint (urb->pipe),
-                       is_out, 1);
-       }
-
-       urb_priv->td_idx = 0;
-       list_add(&urb_priv->pending, &ahcd->pending);
-
-       if (data_len)
-               data = urb->transfer_dma;
-       else
-               data = 0;
-
-       /* NOTE:  TD_CC is set so we can tell which TDs the HC processed by
-        * using TD_CC_GET, as well as by seeing them on the done list.
-        * (CC = NotAccessed ... 0x0F, or 0x0E in PSWs for ISO.)
-        */
-       switch (urb_priv->ed->type) {
-       case PIPE_INTERRUPT:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* setup service interval and starting frame number */
-               info |= (urb->start_frame & TD_FN_MASK);
-               info |= (urb->interval & TD_ISI_MASK) << TD_ISI_SHIFT;
-
-               td_fill(ahcd, info, data, data_len, urb, cnt);
-               cnt++;
-
-               admhcd_to_hcd(ahcd)->self.bandwidth_int_reqs++;
-               break;
-
-       case PIPE_BULK:
-               info = is_out
-                       ? TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               /* TDs _could_ transfer up to 8K each */
-               while (data_len > TD_DATALEN_MAX) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               data, TD_DATALEN_MAX, urb, cnt);
-                       data += TD_DATALEN_MAX;
-                       data_len -= TD_DATALEN_MAX;
-                       cnt++;
-               }
-
-               td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle), data,
-                       data_len, urb, cnt);
-               cnt++;
-
-               if ((urb->transfer_flags & URB_ZERO_PACKET)
-                               && (cnt < urb_priv->td_cnt)) {
-                       td_fill(ahcd, info | ((cnt) ? TD_T_CARRY : toggle),
-                               0, 0, urb, cnt);
-                       cnt++;
-               }
-               break;
-
-       /* control manages DATA0/DATA1 toggle per-request; SETUP resets it,
-        * any DATA phase works normally, and the STATUS ack is special.
-        */
-       case PIPE_CONTROL:
-               /* fill a TD for the setup */
-               info = TD_SCC_NOTACCESSED | TD_DP_SETUP | TD_T_DATA0;
-               td_fill(ahcd, info, urb->setup_dma, 8, urb, cnt++);
-
-               if (data_len > 0) {
-                       /* fill a TD for the data */
-                       info = TD_SCC_NOTACCESSED | TD_T_DATA1;
-                       info |= is_out ? TD_DP_OUT : TD_DP_IN;
-                       /* NOTE:  mishandles transfers >8K, some >4K */
-                       td_fill(ahcd, info, data, data_len, urb, cnt++);
-               }
-
-               /* fill a TD for the ACK */
-               info = (is_out || data_len == 0)
-                       ? TD_SCC_NOTACCESSED | TD_DP_IN | TD_T_DATA1
-                       : TD_SCC_NOTACCESSED | TD_DP_OUT | TD_T_DATA1;
-               td_fill(ahcd, info, data, 0, urb, cnt++);
-
-               break;
-
-       /* ISO has no retransmit, so no toggle;
-        * Each TD could handle multiple consecutive frames (interval 1);
-        * we could often reduce the number of TDs here.
-        */
-       case PIPE_ISOCHRONOUS:
-               info = is_out
-                       ? TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_OUT
-                       : TD_T_CARRY | TD_SCC_NOTACCESSED | TD_DP_IN;
-
-               for (cnt = 0; cnt < urb->number_of_packets; cnt++) {
-                       int frame = urb->start_frame;
-
-                       frame += cnt * urb->interval;
-                       frame &= TD_FN_MASK;
-                       td_fill(ahcd, info | frame,
-                               data + urb->iso_frame_desc[cnt].offset,
-                               urb->iso_frame_desc[cnt].length, urb, cnt);
-               }
-               admhcd_to_hcd(ahcd)->self.bandwidth_isoc_reqs++;
-               break;
-       }
-
-       if (urb_priv->td_cnt != cnt)
-               admhc_err(ahcd, "bad number of tds created for urb %p\n", urb);
-}
-
-/*-------------------------------------------------------------------------*
- * Done List handling functions
- *-------------------------------------------------------------------------*/
-
-/* calculate transfer length/status and update the urb */
-static int td_done(struct admhcd *ahcd, struct urb *urb, struct td *td)
-{
-       struct urb_priv *urb_priv = urb->hcpriv;
-       u32     info;
-       u32     bl;
-       u32     tdDBP;
-       int     type = usb_pipetype(urb->pipe);
-       int     cc;
-       int     status = -EINPROGRESS;
-
-       info = hc32_to_cpup(ahcd, &td->hwINFO);
-       tdDBP = hc32_to_cpup(ahcd, &td->hwDBP);
-       bl = TD_BL_GET(hc32_to_cpup(ahcd, &td->hwCBL));
-       cc = TD_CC_GET(info);
-
-       /* ISO ... drivers see per-TD length/status */
-       if (type == PIPE_ISOCHRONOUS) {
-               /* TODO */
-               int     dlen = 0;
-
-               /* NOTE:  assumes FC in tdINFO == 0, and that
-                * only the first of 0..MAXPSW psws is used.
-                */
-               if (info & TD_CC)       /* hc didn't touch? */
-                       return status;
-
-               if (usb_pipeout(urb->pipe))
-                       dlen = urb->iso_frame_desc[td->index].length;
-               else {
-                       /* short reads are always OK for ISO */
-                       if (cc == TD_CC_DATAUNDERRUN)
-                               cc = TD_CC_NOERROR;
-                       dlen = tdDBP - td->data_dma + bl;
-               }
-
-               urb->actual_length += dlen;
-               urb->iso_frame_desc[td->index].actual_length = dlen;
-               urb->iso_frame_desc[td->index].status = cc_to_error[cc];
-
-               if (cc != TD_CC_NOERROR)
-                       admhc_vdbg (ahcd,
-                               "urb %p iso td %p (%d) len %d cc %d\n",
-                               urb, td, 1 + td->index, dlen, cc);
-
-       /* BULK, INT, CONTROL ... drivers see aggregate length/status,
-        * except that "setup" bytes aren't counted and "short" transfers
-        * might not be reported as errors.
-        */
-       } else {
-               /* update packet status if needed (short is normally ok) */
-               if (cc == TD_CC_DATAUNDERRUN
-                               && !(urb->transfer_flags & URB_SHORT_NOT_OK))
-                       cc = TD_CC_NOERROR;
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       status = cc_to_error[cc];
-
-
-               /* count all non-empty packets except control SETUP packet */
-               if ((type != PIPE_CONTROL || td->index != 0) && tdDBP != 0) {
-                       urb->actual_length += tdDBP - td->data_dma + bl;
-               }
-
-               if (cc != TD_CC_NOERROR && cc < TD_CC_HCD0)
-                       admhc_vdbg(ahcd,
-                               "urb %p td %p (%d) cc %d, len=%d/%d\n",
-                               urb, td, td->index, cc,
-                               urb->actual_length,
-                               urb->transfer_buffer_length);
-       }
-
-       list_del(&td->td_list);
-       urb_priv->td_idx++;
-
-       return status;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void
-ed_halted(struct admhcd *ahcd, struct td *td, int cc, struct td *rev)
-{
-       struct urb              *urb = td->urb;
-       struct urb_priv         *urb_priv = urb->hcpriv;
-       struct ed               *ed = td->ed;
-       struct list_head        *tmp = td->td_list.next;
-       __hc32                  toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       admhc_dump_ed(ahcd, "ed halted", td->ed, 1);
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       /* Get rid of all later tds from this urb. We don't have
-        * to be careful: no errors and nothing was transferred.
-        * Also patch the ed so it looks as if those tds completed normally.
-        */
-       while (tmp != &ed->td_list) {
-               struct td       *next;
-
-               next = list_entry(tmp, struct td, td_list);
-               tmp = next->td_list.next;
-
-               if (next->urb != urb)
-                       break;
-
-               /* NOTE: if multi-td control DATA segments get supported,
-                * this urb had one of them, this td wasn't the last td
-                * in that segment (TD_R clear), this ed halted because
-                * of a short read, _and_ URB_SHORT_NOT_OK is clear ...
-                * then we need to leave the control STATUS packet queued
-                * and clear ED_SKIP.
-                */
-               list_del(&next->td_list);
-               urb_priv->td_cnt++;
-               ed->hwHeadP = next->hwNextTD | toggle;
-       }
-
-       /* help for troubleshooting:  report anything that
-        * looks odd ... that doesn't include protocol stalls
-        * (or maybe some other things)
-        */
-       switch (cc) {
-       case TD_CC_DATAUNDERRUN:
-               if ((urb->transfer_flags & URB_SHORT_NOT_OK) == 0)
-                       break;
-               /* fallthrough */
-       case TD_CC_STALL:
-               if (usb_pipecontrol(urb->pipe))
-                       break;
-               /* fallthrough */
-       default:
-               admhc_dbg (ahcd,
-                       "urb %p path %s ep%d%s %08x cc %d --> status %d\n",
-                       urb, urb->dev->devpath,
-                       usb_pipeendpoint (urb->pipe),
-                       usb_pipein (urb->pipe) ? "in" : "out",
-                       hc32_to_cpu(ahcd, td->hwINFO),
-                       cc, cc_to_error [cc]);
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/* there are some urbs/eds to unlink; called in_irq(), with HCD locked */
-static void
-finish_unlinks(struct admhcd *ahcd, u16 tick)
-{
-       struct ed       *ed, **last;
-
-rescan_all:
-       for (last = &ahcd->ed_rm_list, ed = *last; ed != NULL; ed = *last) {
-               struct list_head        *entry, *tmp;
-               int                     completed, modified;
-               __hc32                  *prev;
-
-               /* only take off EDs that the HC isn't using, accounting for
-                * frame counter wraps and EDs with partially retired TDs
-                */
-               if (likely(HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))) {
-                       if (tick_before (tick, ed->tick)) {
-skip_ed:
-                               last = &ed->ed_rm_next;
-                               continue;
-                       }
-#if 0
-                       if (!list_empty(&ed->td_list)) {
-                               struct td       *td;
-                               u32             head;
-
-                               td = list_entry(ed->td_list.next, struct td,
-                                                       td_list);
-                               head = hc32_to_cpu(ahcd, ed->hwHeadP) &
-                                                               TD_MASK;
-
-                               /* INTR_WDH may need to clean up first */
-                               if (td->td_dma != head)
-                                       goto skip_ed;
-                       }
-#endif
-               }
-
-               /* reentrancy:  if we drop the schedule lock, someone might
-                * have modified this list.  normally it's just prepending
-                * entries (which we'd ignore), but paranoia won't hurt.
-                */
-               *last = ed->ed_rm_next;
-               ed->ed_rm_next = NULL;
-               modified = 0;
-
-               /* unlink urbs as requested, but rescan the list after
-                * we call a completion since it might have unlinked
-                * another (earlier) urb
-                *
-                * When we get here, the HC doesn't see this ed.  But it
-                * must not be rescheduled until all completed URBs have
-                * been given back to the driver.
-                */
-rescan_this:
-               completed = 0;
-               prev = &ed->hwHeadP;
-               list_for_each_safe(entry, tmp, &ed->td_list) {
-                       struct td       *td;
-                       struct urb      *urb;
-                       struct urb_priv *urb_priv;
-                       __hc32          savebits;
-                       int             status;
-
-                       td = list_entry(entry, struct td, td_list);
-                       urb = td->urb;
-                       urb_priv = td->urb->hcpriv;
-
-                       if (!urb->unlinked) {
-                               prev = &td->hwNextTD;
-                               continue;
-                       }
-
-                       if ((urb_priv) == NULL)
-                               continue;
-
-                       /* patch pointer hc uses */
-                       savebits = *prev & ~cpu_to_hc32(ahcd, TD_MASK);
-                       *prev = td->hwNextTD | savebits;
-
-                       /* HC may have partly processed this TD */
-#ifdef ADMHC_VERBOSE_DEBUG
-                       urb_print(ahcd, urb, "PARTIAL", 0);
-#endif
-                       status = td_done(ahcd, urb, td);
-
-                       /* if URB is done, clean up */
-                       if (urb_priv->td_idx == urb_priv->td_cnt) {
-                               modified = completed = 1;
-                               finish_urb(ahcd, urb, status);
-                       }
-               }
-               if (completed && !list_empty(&ed->td_list))
-                       goto rescan_this;
-
-               /* ED's now officially unlinked, hc doesn't see */
-               ed->state = ED_IDLE;
-               ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-               ed->hwNextED = 0;
-               wmb();
-               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP | ED_DEQUEUE);
-
-               /* but if there's work queued, reschedule */
-               if (!list_empty(&ed->td_list)) {
-                       if (HC_IS_RUNNING(admhcd_to_hcd(ahcd)->state))
-                               ed_schedule(ahcd, ed);
-               }
-
-               if (modified)
-                       goto rescan_all;
-       }
-}
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * Process normal completions (error or success) and clean the schedules.
- *
- * This is the main path for handing urbs back to drivers.  The only other
- * path is finish_unlinks(), which unlinks URBs using ed_rm_list, instead of
- * scanning the (re-reversed) donelist as this does.
- */
-
-static void ed_unhalt(struct admhcd *ahcd, struct ed *ed, struct urb *urb)
-{
-       struct list_head *entry,*tmp;
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UNHALT", ed, 0);
-#endif
-       /* clear ed halt; this is the td that caused it, but keep it inactive
-        * until its urb->complete() has a chance to clean up.
-        */
-       ed->hwINFO |= cpu_to_hc32(ahcd, ED_SKIP);
-       wmb();
-       ed->hwHeadP &= ~cpu_to_hc32(ahcd, ED_H);
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               __hc32 info;
-
-               if (td->urb != urb)
-                       break;
-
-               info = td->hwINFO;
-               info &= ~cpu_to_hc32(ahcd, TD_CC | TD_OWN);
-               td->hwINFO = info;
-
-               ed->hwHeadP = td->hwNextTD | toggle;
-               wmb();
-       }
-
-}
-
-static void ed_intr_refill(struct admhcd *ahcd, struct ed *ed)
-{
-       __hc32 toggle = ed->hwHeadP & cpu_to_hc32(ahcd, ED_C);
-
-       ed->hwHeadP = ed->hwTailP | toggle;
-}
-
-
-static inline int is_ed_halted(struct admhcd *ahcd, struct ed *ed)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & ED_H) == ED_H);
-}
-
-static inline int is_td_halted(struct admhcd *ahcd, struct ed *ed,
-               struct td *td)
-{
-       return ((hc32_to_cpup(ahcd, &ed->hwHeadP) & TD_MASK) ==
-               (hc32_to_cpup(ahcd, &td->hwNextTD) & TD_MASK));
-}
-
-static void ed_update(struct admhcd *ahcd, struct ed *ed)
-{
-       struct list_head *entry,*tmp;
-
-#ifdef ADMHC_VERBOSE_DEBUG
-       admhc_dump_ed(ahcd, "UPDATE", ed, 1);
-#endif
-
-       list_for_each_safe(entry, tmp, &ed->td_list) {
-               struct td *td = list_entry(entry, struct td, td_list);
-               struct urb *urb = td->urb;
-               struct urb_priv *urb_priv = urb->hcpriv;
-               int status;
-
-               if (hc32_to_cpup(ahcd, &td->hwINFO) & TD_OWN)
-                       break;
-
-               /* update URB's length and status from TD */
-               status = td_done(ahcd, urb, td);
-               if (is_ed_halted(ahcd, ed) && is_td_halted(ahcd, ed, td))
-                       ed_unhalt(ahcd, ed, urb);
-
-               if (ed->type == PIPE_INTERRUPT)
-                       ed_intr_refill(ahcd,ed);
-
-               /* If all this urb's TDs are done, call complete() */
-               if (urb_priv->td_idx == urb_priv->td_cnt)
-                       finish_urb(ahcd, urb, status);
-
-               /* clean schedule:  unlink EDs that are no longer busy */
-               if (list_empty(&ed->td_list)) {
-                       if (ed->state == ED_OPER)
-                               start_ed_unlink(ahcd, ed);
-
-               /* ... reenabling halted EDs only after fault cleanup */
-               } else if ((ed->hwINFO & cpu_to_hc32(ahcd,
-                                               ED_SKIP | ED_DEQUEUE))
-                                       == cpu_to_hc32(ahcd, ED_SKIP)) {
-                       td = list_entry(ed->td_list.next, struct td, td_list);
-#if 0
-                       if (!(td->hwINFO & cpu_to_hc32(ahcd, TD_DONE))) {
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-                               /* ... hc may need waking-up */
-                               switch (ed->type) {
-                               case PIPE_CONTROL:
-                                       admhc_writel (ahcd, OHCI_CLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               case PIPE_BULK:
-                                       admhc_writel (ahcd, OHCI_BLF,
-                                               &ahcd->regs->cmdstatus);
-                                       break;
-                               }
-                       }
-#else
-                       if ((td->hwINFO & cpu_to_hc32(ahcd, TD_OWN)))
-                               ed->hwINFO &= ~cpu_to_hc32(ahcd, ED_SKIP);
-#endif
-               }
-
-       }
-}
-
-/* there are some tds completed; called in_irq(), with HCD locked */
-static void admhc_td_complete(struct admhcd *ahcd)
-{
-       struct ed       *ed;
-
-       for (ed = ahcd->ed_head; ed; ed = ed->ed_next) {
-               if (ed->state != ED_OPER)
-                       continue;
-
-               ed_update(ahcd, ed);
-       }
-}
diff --git a/target/linux/adm5120/files/drivers/usb/host/adm5120.h b/target/linux/adm5120/files/drivers/usb/host/adm5120.h
deleted file mode 100644 (file)
index fbb9b3a..0000000
+++ /dev/null
@@ -1,762 +0,0 @@
-/*
- * ADM5120 HCD (Host Controller Driver) for USB
- *
- * Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
- *
- * This file was derived from: drivers/usb/host/ohci.h
- *   (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
- *   (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-/*
- * __hc32 and __hc16 are "Host Controller" types, they may be equivalent to
- * __leXX (normally) or __beXX (given OHCI_BIG_ENDIAN), depending on the
- * host controller implementation.
- */
-typedef __u32 __bitwise __hc32;
-typedef __u16 __bitwise __hc16;
-
-/*
- * OHCI Endpoint Descriptor (ED) ... holds TD queue
- * See OHCI spec, section 4.2
- *
- * This is a "Queue Head" for those transfers, which is why
- * both EHCI and UHCI call similar structures a "QH".
- */
-
-#define TD_DATALEN_MAX 4096
-
-#define ED_ALIGN       16
-#define ED_MASK        ((u32)~(ED_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct ed {
-       /* first fields are hardware-specified */
-       __hc32                  hwINFO;      /* endpoint config bitmap */
-       /* info bits defined by hcd */
-#define ED_DEQUEUE     (1 << 27)
-       /* info bits defined by the hardware */
-#define ED_MPS_SHIFT   16
-#define ED_MPS_MASK    ((1 << 11)-1)
-#define ED_MPS_GET(x)  (((x) >> ED_MPS_SHIFT) & ED_MPS_MASK)
-#define ED_ISO         (1 << 15)               /* isochronous endpoint */
-#define ED_SKIP                (1 << 14)
-#define ED_SPEED_FULL  (1 << 13)               /* fullspeed device */
-#define ED_INT         (1 << 11)               /* interrupt endpoint */
-#define ED_EN_SHIFT    7                       /* endpoint shift */
-#define ED_EN_MASK     ((1 << 4)-1)            /* endpoint mask */
-#define ED_EN_GET(x)   (((x) >> ED_EN_SHIFT) & ED_EN_MASK)
-#define ED_FA_MASK     ((1 << 7)-1)            /* function address mask */
-#define ED_FA_GET(x)   ((x) & ED_FA_MASK)
-       __hc32                  hwTailP;        /* tail of TD list */
-       __hc32                  hwHeadP;        /* head of TD list (hc r/w) */
-#define ED_C           (0x02)                  /* toggle carry */
-#define ED_H           (0x01)                  /* halted */
-       __hc32                  hwNextED;       /* next ED in list */
-
-       /* rest are purely for the driver's use */
-       dma_addr_t              dma;            /* addr of ED */
-       struct td               *dummy;         /* next TD to activate */
-
-       struct list_head        urb_list;       /* list of our URBs */
-
-       /* host's view of schedule */
-       struct ed               *ed_next;       /* on schedule list */
-       struct ed               *ed_prev;       /* for non-interrupt EDs */
-       struct ed               *ed_rm_next;    /* on rm list */
-       struct list_head        td_list;        /* "shadow list" of our TDs */
-
-       /* create --> IDLE --> OPER --> ... --> IDLE --> destroy
-        * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
-        */
-       u8                      state;          /* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE                0x00            /* NOT linked to HC */
-#define ED_UNLINK      0x01            /* being unlinked from hc */
-#define ED_OPER                0x02            /* IS linked to hc */
-
-       u8                      type;           /* PIPE_{BULK,...} */
-
-       /* periodic scheduling params (for intr and iso) */
-       u8                      branch;
-       u16                     interval;
-       u16                     load;
-       u16                     last_iso;       /* iso only */
-
-       /* HC may see EDs on rm_list until next frame (frame_no == tick) */
-       u16                     tick;
-} __attribute__ ((aligned(ED_ALIGN)));
-
-/*
- * OHCI Transfer Descriptor (TD) ... one per transfer segment
- * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
- * and 4.3.2 (iso)
- */
-
-#define TD_ALIGN       32
-#define TD_MASK        ((u32)~(TD_ALIGN-1))    /* strip hw status in low addr bits */
-
-struct td {
-       /* first fields are hardware-specified */
-       __hc32          hwINFO;         /* transfer info bitmask */
-
-       /* hwINFO bits */
-#define TD_OWN         (1 << 31)               /* owner of the descriptor */
-#define TD_CC_SHIFT    27                      /* condition code */
-#define TD_CC_MASK     0xf
-#define TD_CC          (TD_CC_MASK << TD_CC_SHIFT)
-#define TD_CC_GET(x)   (((x) >> TD_CC_SHIFT) & TD_CC_MASK)
-
-#define TD_EC_SHIFT    25                      /* error count */
-#define TD_EC_MASK     0x3
-#define TD_EC          (TD_EC_MASK << TD_EC_SHIFT)
-#define TD_EC_GET(x)   ((x >> TD_EC_SHIFT) & TD_EC_MASK)
-#define TD_T_SHIFT     23                      /* data toggle state */
-#define TD_T_MASK      0x3
-#define TD_T           (TD_T_MASK << TD_T_SHIFT)
-#define TD_T_DATA0     (0x2 << TD_T_SHIFT)     /* DATA0 */
-#define TD_T_DATA1     (0x3 << TD_T_SHIFT)     /* DATA1 */
-#define TD_T_CARRY     (0x0 << TD_T_SHIFT)     /* uses ED_C */
-#define TD_T_GET(x)    (((x) >> TD_T_SHIFT) & TD_T_MASK)
-#define TD_DP_SHIFT    21                      /* direction/pid */
-#define TD_DP_MASK     0x3
-#define TD_DP          (TD_DP_MASK << TD_DP_SHIFT)
-#define TD_DP_GET      (((x) >> TD_DP_SHIFT) & TD_DP_MASK)
-#define TD_DP_SETUP    (0x0 << TD_DP_SHIFT)    /* SETUP pid */
-#define TD_DP_OUT      (0x1 << TD_DP_SHIFT)    /* OUT pid */
-#define TD_DP_IN       (0x2 << TD_DP_SHIFT)    /* IN pid */
-#define TD_ISI_SHIFT   8                       /* Interrupt Service Interval */
-#define TD_ISI_MASK    0x3f
-#define TD_ISI_GET(x)  (((x) >> TD_ISI_SHIFT) & TD_ISI_MASK)
-#define TD_FN_MASK     0x3f                    /* frame number */
-#define TD_FN_GET(x)   ((x) & TD_FN_MASK)
-
-       __hc32          hwDBP;          /* Data Buffer Pointer (or 0) */
-       __hc32          hwCBL;          /* Controller/Buffer Length */
-
-       /* hwCBL bits */
-#define TD_BL_MASK     0xffff          /* buffer length */
-#define TD_BL_GET(x)   ((x) & TD_BL_MASK)
-#define TD_IE          (1 << 16)       /* interrupt enable */
-       __hc32          hwNextTD;       /* Next TD Pointer */
-
-       /* rest are purely for the driver's use */
-       __u8            index;
-       struct ed       *ed;
-       struct td       *td_hash;       /* dma-->td hashtable */
-       struct td       *next_dl_td;
-       struct urb      *urb;
-
-       dma_addr_t      td_dma;         /* addr of this TD */
-       dma_addr_t      data_dma;       /* addr of data it points to */
-
-       struct list_head td_list;       /* "shadow list", TDs on same ED */
-
-       u32             flags;
-#define TD_FLAG_DONE   (1 << 17)       /* retired to done list */
-#define TD_FLAG_ISO    (1 << 16)       /* copy of ED_ISO */
-} __attribute__ ((aligned(TD_ALIGN))); /* c/b/i need 16; only iso needs 32 */
-
-/*
- * Hardware transfer status codes -- CC from td->hwINFO
- */
-#define TD_CC_NOERROR          0x00
-#define TD_CC_CRC              0x01
-#define TD_CC_BITSTUFFING      0x02
-#define TD_CC_DATATOGGLEM      0x03
-#define TD_CC_STALL            0x04
-#define TD_CC_DEVNOTRESP       0x05
-#define TD_CC_PIDCHECKFAIL     0x06
-#define TD_CC_UNEXPECTEDPID    0x07
-#define TD_CC_DATAOVERRUN      0x08
-#define TD_CC_DATAUNDERRUN     0x09
-    /* 0x0A, 0x0B reserved for hardware */
-#define TD_CC_BUFFEROVERRUN    0x0C
-#define TD_CC_BUFFERUNDERRUN   0x0D
-    /* 0x0E, 0x0F reserved for HCD */
-#define TD_CC_HCD0             0x0E
-#define TD_CC_NOTACCESSED      0x0F
-
-/*
- * preshifted status codes
- */
-#define TD_SCC_NOTACCESSED     (TD_CC_NOTACCESSED << TD_CC_SHIFT)
-
-
-/* map OHCI TD status codes (CC) to errno values */
-static const int cc_to_error [16] = {
-       /* No  Error  */        0,
-       /* CRC Error  */        -EILSEQ,
-       /* Bit Stuff  */        -EPROTO,
-       /* Data Togg  */        -EILSEQ,
-       /* Stall      */        -EPIPE,
-       /* DevNotResp */        -ETIME,
-       /* PIDCheck   */        -EPROTO,
-       /* UnExpPID   */        -EPROTO,
-       /* DataOver   */        -EOVERFLOW,
-       /* DataUnder  */        -EREMOTEIO,
-       /* (for hw)   */        -EIO,
-       /* (for hw)   */        -EIO,
-       /* BufferOver */        -ECOMM,
-       /* BuffUnder  */        -ENOSR,
-       /* (for HCD)  */        -EALREADY,
-       /* (for HCD)  */        -EALREADY
-};
-
-#define NUM_INTS       32
-
-/*
- * This is the structure of the OHCI controller's memory mapped I/O region.
- * You must use readl() and writel() (in <asm/io.h>) to access these fields!!
- * Layout is in section 7 (and appendix B) of the spec.
- */
-struct admhcd_regs {
-       __hc32  gencontrol;     /* General Control */
-       __hc32  int_status;     /* Interrupt Status */
-       __hc32  int_enable;     /* Interrupt Enable */
-       __hc32  reserved00;
-       __hc32  host_control;   /* Host General Control */
-       __hc32  reserved01;
-       __hc32  fminterval;     /* Frame Interval */
-       __hc32  fmnumber;       /* Frame Number */
-       __hc32  reserved02;
-       __hc32  reserved03;
-       __hc32  reserved04;
-       __hc32  reserved05;
-       __hc32  reserved06;
-       __hc32  reserved07;
-       __hc32  reserved08;
-       __hc32  reserved09;
-       __hc32  reserved10;
-       __hc32  reserved11;
-       __hc32  reserved12;
-       __hc32  reserved13;
-       __hc32  reserved14;
-       __hc32  reserved15;
-       __hc32  reserved16;
-       __hc32  reserved17;
-       __hc32  reserved18;
-       __hc32  reserved19;
-       __hc32  reserved20;
-       __hc32  reserved21;
-       __hc32  lsthresh;       /* Low Speed Threshold */
-       __hc32  rhdesc;         /* Root Hub Descriptor */
-#define MAX_ROOT_PORTS 2
-       __hc32  portstatus[MAX_ROOT_PORTS]; /* Port Status */
-       __hc32  hosthead;       /* Host Descriptor Head */
-} __attribute__ ((aligned(32)));
-
-/*
- * General Control register bits
- */
-#define ADMHC_CTRL_UHFE        (1 << 0)        /* USB Host Function Enable */
-#define ADMHC_CTRL_SIR (1 << 1)        /* Software Interrupt request */
-#define ADMHC_CTRL_DMAA        (1 << 2)        /* DMA Arbitration Control */
-#define ADMHC_CTRL_SR  (1 << 3)        /* Software Reset */
-
-/*
- * Host General Control register bits
- */
-#define ADMHC_HC_BUSS          0x3             /* USB bus state */
-#define   ADMHC_BUSS_RESET     0x0
-#define   ADMHC_BUSS_RESUME    0x1
-#define   ADMHC_BUSS_OPER      0x2
-#define   ADMHC_BUSS_SUSPEND   0x3
-#define ADMHC_HC_DMAE          (1 << 2)        /* DMA enable */
-
-/*
- * Interrupt Status/Enable register bits
- */
-#define ADMHC_INTR_SOFI        (1 << 4)        /* start of frame */
-#define ADMHC_INTR_RESI        (1 << 5)        /* resume detected */
-#define ADMHC_INTR_6   (1 << 6)        /* unknown */
-#define ADMHC_INTR_7   (1 << 7)        /* unknown */
-#define ADMHC_INTR_BABI        (1 << 8)        /* babble detected */
-#define ADMHC_INTR_INSM        (1 << 9)        /* root hub status change */
-#define ADMHC_INTR_SO  (1 << 10)       /* scheduling overrun */
-#define ADMHC_INTR_FNO (1 << 11)       /* frame number overflow */
-#define ADMHC_INTR_TDC (1 << 20)       /* transfer descriptor completed */
-#define ADMHC_INTR_SWI (1 << 29)       /* software interrupt */
-#define ADMHC_INTR_FATI        (1 << 30)       /* fatal error */
-#define ADMHC_INTR_INTA        (1 << 31)       /* interrupt active */
-
-#define ADMHC_INTR_MIE (1 << 31)       /* master interrupt enable */
-
-/*
- * SOF Frame Interval register bits
- */
-#define ADMHC_SFI_FI_MASK      ((1 << 14)-1)   /* Frame Interval value */
-#define ADMHC_SFI_FSLDP_SHIFT  16
-#define ADMHC_SFI_FSLDP_MASK   ((1 << 15)-1)
-#define ADMHC_SFI_FIT          (1 << 31)       /* Frame Interval Toggle */
-
-/*
- * SOF Frame Number register bits
- */
-#define ADMHC_SFN_FN_MASK      ((1 << 16)-1)   /* Frame Number Mask */
-#define ADMHC_SFN_FR_SHIFT     16              /* Frame Remaining Shift */
-#define ADMHC_SFN_FR_MASK      ((1 << 14)-1)   /* Frame Remaining Mask */
-#define ADMHC_SFN_FRT          (1 << 31)       /* Frame Remaining Toggle */
-
-/*
- * Root Hub Descriptor register bits
- */
-#define ADMHC_RH_NUMP  0xff            /* number of ports */
-#define        ADMHC_RH_PSM    (1 << 8)        /* power switching mode */
-#define        ADMHC_RH_NPS    (1 << 9)        /* no power switching */
-#define        ADMHC_RH_OCPM   (1 << 10)       /* over current protection mode */
-#define        ADMHC_RH_NOCP   (1 << 11)       /* no over current protection */
-#define        ADMHC_RH_PPCM   (0xff << 16)    /* port power control */
-
-#define ADMHC_RH_LPS   (1 << 24)       /* local power switch */
-#define ADMHC_RH_OCI   (1 << 25)       /* over current indicator */
-
-/* status change bits */
-#define ADMHC_RH_LPSC  (1 << 26)       /* local power switch change */
-#define ADMHC_RH_OCIC  (1 << 27)       /* over current indicator change */
-
-#define ADMHC_RH_DRWE  (1 << 28)       /* device remote wakeup enable */
-#define ADMHC_RH_CRWE  (1 << 29)       /* clear remote wakeup enable */
-
-#define ADMHC_RH_CGP   (1 << 24)       /* clear global power */
-#define ADMHC_RH_SGP   (1 << 26)       /* set global power */
-
-/*
- * Port Status register bits
- */
-#define ADMHC_PS_CCS   (1 << 0)        /* current connect status */
-#define ADMHC_PS_PES   (1 << 1)        /* port enable status */
-#define ADMHC_PS_PSS   (1 << 2)        /* port suspend status */
-#define ADMHC_PS_POCI  (1 << 3)        /* port over current indicator */
-#define ADMHC_PS_PRS   (1 << 4)        /* port reset status */
-#define ADMHC_PS_PPS   (1 << 8)        /* port power status */
-#define ADMHC_PS_LSDA  (1 << 9)        /* low speed device attached */
-
-/* status change bits */
-#define ADMHC_PS_CSC   (1 << 16)       /* connect status change */
-#define ADMHC_PS_PESC  (1 << 17)       /* port enable status change */
-#define ADMHC_PS_PSSC  (1 << 18)       /* port suspend status change */
-#define ADMHC_PS_OCIC  (1 << 19)       /* over current indicator change */
-#define ADMHC_PS_PRSC  (1 << 20)       /* port reset status change */
-
-/* port feature bits */
-#define ADMHC_PS_CPE   (1 << 0)        /* clear port enable */
-#define ADMHC_PS_SPE   (1 << 1)        /* set port enable */
-#define ADMHC_PS_SPS   (1 << 2)        /* set port suspend */
-#define ADMHC_PS_CPS   (1 << 3)        /* clear suspend status */
-#define ADMHC_PS_SPR   (1 << 4)        /* set port reset */
-#define ADMHC_PS_SPP   (1 << 8)        /* set port power */
-#define ADMHC_PS_CPP   (1 << 9)        /* clear port power */
-
-/*
- * the POTPGT value is not defined in the ADMHC, so define a dummy value
- */
-#define ADMHC_POTPGT   2               /* in ms */
-
-/* hcd-private per-urb state */
-struct urb_priv {
-       struct ed               *ed;
-       struct list_head        pending;        /* URBs on the same ED */
-
-       u32                     td_cnt;         /* # tds in this request */
-       u32                     td_idx;         /* index of the current td */
-       struct td               *td[0];         /* all TDs in this request */
-};
-
-#define TD_HASH_SIZE    64    /* power'o'two */
-/* sizeof (struct td) ~= 64 == 2^6 ... */
-#define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
-
-/*
- * This is the full ADMHCD controller description
- *
- * Note how the "proper" USB information is just
- * a subset of what the full implementation needs. (Linus)
- */
-
-struct admhcd {
-       spinlock_t              lock;
-
-       /*
-        * I/O memory used to communicate with the HC (dma-consistent)
-        */
-       struct admhcd_regs __iomem *regs;
-
-       /*
-        * hcd adds to schedule for a live hc any time, but removals finish
-        * only at the start of the next frame.
-        */
-
-       struct ed               *ed_head;
-       struct ed               *ed_tails[4];
-
-       struct ed               *ed_rm_list;    /* to be removed */
-
-       struct ed               *periodic[NUM_INTS];    /* shadow int_table */
-
-#if 0  /* TODO: remove? */
-       /*
-        * OTG controllers and transceivers need software interaction;
-        * other external transceivers should be software-transparent
-        */
-       struct otg_transceiver  *transceiver;
-#endif
-
-       /*
-        * memory management for queue data structures
-        */
-       struct dma_pool         *td_cache;
-       struct dma_pool         *ed_cache;
-       struct td               *td_hash[TD_HASH_SIZE];
-       struct list_head        pending;
-
-       /*
-        * driver state
-        */
-       int                     num_ports;
-       int                     load[NUM_INTS];
-       u32                     host_control;   /* copy of the host_control reg */
-       unsigned long           next_statechange;       /* suspend/resume */
-       u32                     fminterval;             /* saved register */
-       unsigned                autostop:1;     /* rh auto stopping/stopped */
-
-       unsigned long           flags;          /* for HC bugs */
-#define        OHCI_QUIRK_AMD756       0x01                    /* erratum #4 */
-#define        OHCI_QUIRK_SUPERIO      0x02                    /* natsemi */
-#define        OHCI_QUIRK_INITRESET    0x04                    /* SiS, OPTi, ... */
-#define        OHCI_QUIRK_BE_DESC      0x08                    /* BE descriptors */
-#define        OHCI_QUIRK_BE_MMIO      0x10                    /* BE registers */
-#define        OHCI_QUIRK_ZFMICRO      0x20                    /* Compaq ZFMicro chipset*/
-       // there are also chip quirks/bugs in init logic
-
-#ifdef DEBUG
-       struct dentry           *debug_dir;
-       struct dentry           *debug_async;
-       struct dentry           *debug_periodic;
-       struct dentry           *debug_registers;
-#endif
-};
-
-/* convert between an hcd pointer and the corresponding ahcd_hcd */
-static inline struct admhcd *hcd_to_admhcd(struct usb_hcd *hcd)
-{
-       return (struct admhcd *)(hcd->hcd_priv);
-}
-static inline struct usb_hcd *admhcd_to_hcd(const struct admhcd *ahcd)
-{
-       return container_of((void *)ahcd, struct usb_hcd, hcd_priv);
-}
-
-/*-------------------------------------------------------------------------*/
-
-#ifndef DEBUG
-#define STUB_DEBUG_FILES
-#endif /* DEBUG */
-
-#ifdef DEBUG
-#      define admhc_dbg(ahcd, fmt, args...) \
-               printk(KERN_DEBUG "adm5120-hcd: " fmt , ## args )
-#else
-#      define admhc_dbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-#define admhc_err(ahcd, fmt, args...) \
-       printk(KERN_ERR "adm5120-hcd: " fmt , ## args )
-#define admhc_info(ahcd, fmt, args...) \
-       printk(KERN_INFO "adm5120-hcd: " fmt , ## args )
-#define admhc_warn(ahcd, fmt, args...) \
-       printk(KERN_WARNING "adm5120-hcd: " fmt , ## args )
-
-#ifdef ADMHC_VERBOSE_DEBUG
-#      define admhc_vdbg admhc_dbg
-#else
-#      define admhc_vdbg(ahcd, fmt, args...) do { } while (0)
-#endif
-
-/*-------------------------------------------------------------------------*/
-
-/*
- * While most USB host controllers implement their registers and
- * in-memory communication descriptors in little-endian format,
- * a minority (notably the IBM STB04XXX and the Motorola MPC5200
- * processors) implement them in big endian format.
- *
- * In addition some more exotic implementations like the Toshiba
- * Spider (aka SCC) cell southbridge are "mixed" endian, that is,
- * they have a different endianness for registers vs. in-memory
- * descriptors.
- *
- * This attempts to support either format at compile time without a
- * runtime penalty, or both formats with the additional overhead
- * of checking a flag bit.
- *
- * That leads to some tricky Kconfig rules howevber. There are
- * different defaults based on some arch/ppc platforms, though
- * the basic rules are:
- *
- * Controller type              Kconfig options needed
- * ---------------              ----------------------
- * little endian                CONFIG_USB_ADMHC_LITTLE_ENDIAN
- *
- * fully big endian             CONFIG_USB_ADMHC_BIG_ENDIAN_DESC _and_
- *                              CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
- *
- * mixed endian                 CONFIG_USB_ADMHC_LITTLE_ENDIAN _and_
- *                              CONFIG_USB_OHCI_BIG_ENDIAN_{MMIO,DESC}
- *
- * (If you have a mixed endian controller, you -must- also define
- * CONFIG_USB_ADMHC_LITTLE_ENDIAN or things will not work when building
- * both your mixed endian and a fully big endian controller support in
- * the same kernel image).
- */
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_DESC
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_desc(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_DESC)
-#else
-#define big_endian_desc(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_desc(ahcd)  0               /* only little endian */
-#endif
-
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-#ifdef CONFIG_USB_ADMHC_LITTLE_ENDIAN
-#define big_endian_mmio(ahcd)  (ahcd->flags & OHCI_QUIRK_BE_MMIO)
-#else
-#define big_endian_mmio(ahcd)  1               /* only big endian */
-#endif
-#else
-#define big_endian_mmio(ahcd)  0               /* only little endian */
-#endif
-
-/*
- * Big-endian read/write functions are arch-specific.
- * Other arches can be added if/when they're needed.
- *
- * REVISIT: arch/powerpc now has readl/writel_be, so the
- * definition below can die once the STB04xxx support is
- * finally ported over.
- */
-#if defined(CONFIG_PPC) && !defined(CONFIG_PPC_MERGE)
-#define readl_be(addr)         in_be32((__force unsigned *)addr)
-#define writel_be(val, addr)   out_be32((__force unsigned *)addr, val)
-#endif
-
-static inline unsigned int admhc_readl(const struct admhcd *ahcd,
-       __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       return big_endian_mmio(ahcd) ?
-               readl_be(regs) :
-               readl(regs);
-#else
-       return readl(regs);
-#endif
-}
-
-static inline void admhc_writel(const struct admhcd *ahcd,
-       const unsigned int val, __hc32 __iomem *regs)
-{
-#ifdef CONFIG_USB_ADMHC_BIG_ENDIAN_MMIO
-       big_endian_mmio(ahcd) ?
-               writel_be(val, regs) :
-               writel(val, regs);
-#else
-               writel(val, regs);
-#endif
-}
-
-static inline void admhc_writel_flush(const struct admhcd *ahcd)
-{
-#if 0
-       /* TODO: remove? */
-       (void) admhc_readl(ahcd, &ahcd->regs->gencontrol);
-#endif
-}
-
-
-/*-------------------------------------------------------------------------*/
-
-/* cpu to ahcd */
-static inline __hc16 cpu_to_hc16(const struct admhcd *ahcd, const u16 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc16)cpu_to_be16(x) :
-               (__force __hc16)cpu_to_le16(x);
-}
-
-static inline __hc16 cpu_to_hc16p(const struct admhcd *ahcd, const u16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be16p(x) :
-               cpu_to_le16p(x);
-}
-
-static inline __hc32 cpu_to_hc32(const struct admhcd *ahcd, const u32 x)
-{
-       return big_endian_desc(ahcd) ?
-               (__force __hc32)cpu_to_be32(x) :
-               (__force __hc32)cpu_to_le32(x);
-}
-
-static inline __hc32 cpu_to_hc32p(const struct admhcd *ahcd, const u32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               cpu_to_be32p(x) :
-               cpu_to_le32p(x);
-}
-
-/* ahcd to cpu */
-static inline u16 hc16_to_cpu(const struct admhcd *ahcd, const __hc16 x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpu((__force __be16)x) :
-               le16_to_cpu((__force __le16)x);
-}
-
-static inline u16 hc16_to_cpup(const struct admhcd *ahcd, const __hc16 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be16_to_cpup((__force __be16 *)x) :
-               le16_to_cpup((__force __le16 *)x);
-}
-
-static inline u32 hc32_to_cpu(const struct admhcd *ahcd, const __hc32 x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpu((__force __be32)x) :
-               le32_to_cpu((__force __le32)x);
-}
-
-static inline u32 hc32_to_cpup(const struct admhcd *ahcd, const __hc32 *x)
-{
-       return big_endian_desc(ahcd) ?
-               be32_to_cpup((__force __be32 *)x) :
-               le32_to_cpup((__force __le32 *)x);
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline u16 admhc_frame_no(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) & ADMHC_SFN_FN_MASK;
-       return (u16)t;
-}
-
-static inline u16 admhc_frame_remain(const struct admhcd *ahcd)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->fmnumber) >> ADMHC_SFN_FR_SHIFT;
-       t &= ADMHC_SFN_FR_MASK;
-       return (u16)t;
-}
-
-/*-------------------------------------------------------------------------*/
-
-static inline void admhc_disable(struct admhcd *ahcd)
-{
-       admhcd_to_hcd(ahcd)->state = HC_STATE_HALT;
-}
-
-#define        FI              0x2edf          /* 12000 bits per frame (-1) */
-#define        FSLDP(fi)       (0x7fff & ((6 * ((fi) - 1200)) / 7))
-#define        FIT             ADMHC_SFI_FIT
-#define LSTHRESH       0x628           /* lowspeed bit threshold */
-
-static inline void periodic_reinit(struct admhcd *ahcd)
-{
-#if 0
-       u32     fi = ahcd->fminterval & ADMHC_SFI_FI_MASK;
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#else
-       u32     fit = admhc_readl(ahcd, &ahcd->regs->fminterval) & FIT;
-
-       /* TODO: adjust FSLargestDataPacket value too? */
-       admhc_writel(ahcd, (fit ^ FIT) | ahcd->fminterval,
-                                       &ahcd->regs->fminterval);
-#endif
-}
-
-static inline u32 admhc_read_rhdesc(struct admhcd *ahcd)
-{
-       return admhc_readl(ahcd, &ahcd->regs->rhdesc);
-}
-
-static inline u32 admhc_read_portstatus(struct admhcd *ahcd, int port)
-{
-       return admhc_readl(ahcd, &ahcd->regs->portstatus[port]);
-}
-
-static inline void admhc_write_portstatus(struct admhcd *ahcd, int port,
-               u32 value)
-{
-       admhc_writel(ahcd, value, &ahcd->regs->portstatus[port]);
-}
-
-static inline void roothub_write_status(struct admhcd *ahcd, u32 value)
-{
-       /* FIXME: read-only bits must be masked out */
-       admhc_writel(ahcd, value, &ahcd->regs->rhdesc);
-}
-
-static inline void admhc_intr_disable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t &= ~(ints);
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_enable(struct admhcd *ahcd, u32 ints)
-{
-       u32     t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->int_enable);
-       t |= ints;
-       admhc_writel(ahcd, t, &ahcd->regs->int_enable);
-       /* TODO: flush writes ?*/
-}
-
-static inline void admhc_intr_ack(struct admhcd *ahcd, u32 ints)
-{
-       admhc_writel(ahcd, ints, &ahcd->regs->int_status);
-}
-
-static inline void admhc_dma_enable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (t & ADMHC_HC_DMAE)
-               return;
-
-       t |= ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd,"DMA enabled\n");
-}
-
-static inline void admhc_dma_disable(struct admhcd *ahcd)
-{
-       u32 t;
-
-       t = admhc_readl(ahcd, &ahcd->regs->host_control);
-       if (!(t & ADMHC_HC_DMAE))
-               return;
-
-       t &= ~ADMHC_HC_DMAE;
-       admhc_writel(ahcd, t, &ahcd->regs->host_control);
-       admhc_vdbg(ahcd,"DMA disabled\n");
-}
diff --git a/target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c b/target/linux/adm5120/files/drivers/watchdog/adm5120_wdt.c
deleted file mode 100644 (file)
index cddb172..0000000
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- *     ADM5120_WDT 0.01: Infineon ADM5120 SoC watchdog driver
- *     Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2007
- *
- *     based on
- *
- *     RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- *
- *     This program is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License
- *     as published by the Free Software Foundation; either version
- *     2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/fs.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-
-#include <asm/bootinfo.h>
-
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
-
-
-#define DEFAULT_TIMEOUT        15              /* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT    327
-/* Max is 327 seconds, counter is 15-bit integer, step is 10 ms */
-
-#define NAME "adm5120_wdt"
-#define VERSION "0.1"
-
-static int expect_close = 0;
-static int access = 0;
-static unsigned int timeout = DEFAULT_TIMEOUT;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void wdt_set_timeout(void)
-{
-       u32 val = (1 << 31) | (((timeout * 100) & 0x7FFF) << 16);
-       SW_WRITE_REG(SWITCH_REG_WDOG0, val);
-}
-
-/*
-   It looks like WDOG0-register-write don't modify counter,
-   but WDOG0-register-read resets counter.
-*/
-
-static inline void wdt_reset_counter(void)
-{
-       SW_READ_REG(SWITCH_REG_WDOG0);
-}
-
-static inline void wdt_disable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_WDOG0, 0x7FFF0000);
-}
-
-
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
-       /* Allow only one person to hold it open */
-       if (access)
-               return -EBUSY;
-
-       if (nowayout) {
-               __module_get(THIS_MODULE);
-       }
-
-       /* Activate timer */
-       wdt_reset_counter();
-       wdt_set_timeout();
-       printk(KERN_INFO NAME ": enabling watchdog timer\n");
-       access = 1;
-       return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
-       /*
-        *      Shut off the timer.
-        *      Lock it in if it's a module and we set nowayout
-        */
-       if (expect_close && (nowayout == 0)) {
-               wdt_disable();
-               printk(KERN_INFO NAME ": disabling watchdog timer\n");
-               module_put(THIS_MODULE);
-       } else {
-               printk(KERN_CRIT NAME ": device closed unexpectedly.  WDT will not stop!\n");
-       }
-       access = 0;
-       return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
-       /* Refresh the timer. */
-       if (len) {
-               if (!nowayout) {
-                       size_t i;
-
-                       /* In case it was set long ago */
-                       expect_close = 0;
-
-                       for (i = 0; i != len; i++) {
-                               char c;
-                               if (get_user(c, data + i))
-                                       return -EFAULT;
-                               if (c == 'V')
-                                       expect_close = 1;
-                       }
-               }
-               wdt_reset_counter();
-               return len;
-       }
-       return 0;
-}
-
-static int wdt_ioctl(struct inode *inode, struct file *file,
-       unsigned int cmd, unsigned long arg)
-{
-       int new_timeout;
-       static struct watchdog_info ident = {
-               .options =              WDIOF_SETTIMEOUT |
-                                       WDIOF_KEEPALIVEPING |
-                                       WDIOF_MAGICCLOSE,
-               .firmware_version =     0,
-               .identity =             "ADM5120_WDT Watchdog",
-       };
-       switch (cmd) {
-               default:
-                       return -ENOTTY;
-               case WDIOC_GETSUPPORT:
-                       if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
-                               return -EFAULT;
-                       return 0;
-               case WDIOC_GETSTATUS:
-               case WDIOC_GETBOOTSTATUS:
-                       return put_user(0,(int *)arg);
-               case WDIOC_KEEPALIVE:
-                       wdt_reset_counter();
-                       return 0;
-               case WDIOC_SETTIMEOUT:
-                       if (get_user(new_timeout, (int *)arg))
-                               return -EFAULT;
-                       if (new_timeout < 1)
-                               return -EINVAL;
-                       if (new_timeout > MAX_TIMEOUT)
-                               return -EINVAL;
-                       timeout = new_timeout;
-                       wdt_set_timeout();
-                       /* Fall */
-               case WDIOC_GETTIMEOUT:
-                       return put_user(timeout, (int *)arg);
-       }
-}
-
-static struct file_operations wdt_fops = {
-       owner:          THIS_MODULE,
-       llseek:         no_llseek,
-       write:          wdt_write,
-       ioctl:          wdt_ioctl,
-       open:           wdt_open,
-       release:        wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
-       minor:          WATCHDOG_MINOR,
-       name:           "watchdog",
-       fops:           &wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION "\n";
-
-static int __init watchdog_init(void)
-{
-       int ret;
-
-       ret = misc_register(&wdt_miscdev);
-
-       if (ret)
-               return ret;
-
-       wdt_disable();
-       printk(banner);
-
-       return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
-       misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_board.h
deleted file mode 100644 (file)
index ecb12d9..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 board definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_BOARD_H_
-#define _ADM5120_BOARD_H_
-
-#include <linux/init.h>
-#include <linux/list.h>
-
-#define ADM5120_BOARD_NAMELEN  64
-
-struct adm5120_board {
-       unsigned long           mach_type;
-       char                    name[ADM5120_BOARD_NAMELEN];
-
-       void                    (*board_setup)(void);
-       void                    (*board_reset)(void);
-
-       unsigned int            eth_num_ports;
-       unsigned char           *eth_vlans;
-       unsigned int            num_devices;
-       struct platform_device  **devices;
-       unsigned int            pci_nr_irqs;
-       struct adm5120_pci_irq  *pci_irq_map;
-
-       struct list_head        list;
-};
-
-extern void adm5120_board_register(struct adm5120_board *) __init;
-
-#define ADM5120_BOARD_START(_type, _name)                              \
-static struct adm5120_board adm5120_board_##_type __initdata;          \
-                                                                       \
-static __init int adm5120_board_##_type##_register(void)               \
-{                                                                      \
-       adm5120_board_register(&adm5120_board_##_type);                 \
-       return 0;                                                       \
-}                                                                      \
-pure_initcall(adm5120_board_##_type##_register);                       \
-                                                                       \
-static struct adm5120_board adm5120_board_##_type __initdata = {       \
-       .mach_type      = MACH_ADM5120_##_type,                         \
-       .name           = _name,
-
-#define ADM5120_BOARD_END                                              \
-};
-
-#endif /* _ADM5120_BOARD_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_defs.h
deleted file mode 100644 (file)
index bac8453..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 SoC definitions
- *
- *  This file defines some constants specific to the ADM5120 SoC
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ADM5120_DEFS_H
-#define _ADM5120_DEFS_H
-
-#define ADM5120_SDRAM0_BASE    0x00000000
-#define ADM5120_SDRAM1_BASE    0x01000000
-#define ADM5120_SRAM1_BASE     0x10000000
-#define ADM5120_EXTIO0_BASE    0x10C00000
-#define ADM5120_EXTIO0_SIZE    0x00200000
-#define ADM5120_EXTIO1_BASE    0x10E00000
-#define ADM5120_EXTIO1_SIZE    0x00200000
-#define ADM5120_MPMC_BASE      0x11000000
-#define ADM5120_MPMC_SIZE      0x00200000
-#define ADM5120_USBC_BASE      0x11200000
-#define ADM5120_USBC_SIZE      0x00200000
-#define ADM5120_PCIMEM_BASE    0x11400000
-#define ADM5120_PCIMEM_SIZE    0x00100000
-#define ADM5120_PCIIO_BASE     0x11500000
-#define ADM5120_PCIIO_SIZE     0x000FFFF0
-#define ADM5120_PCICFG_ADDR    0x115FFFF0
-#define ADM5120_PCICFG_DATA    0x115FFFF8
-#define ADM5120_PCICFG_SIZE    0x00000010
-#define ADM5120_SWITCH_BASE    0x12000000
-#define ADM5120_SWITCH_SIZE    0x00200000
-#define ADM5120_INTC_BASE      0x12200000
-#define ADM5120_INTC_SIZE      0x00200000
-#define ADM5120_UART0_BASE     0x12600000
-#define ADM5120_UART1_BASE     0x12800000
-#define ADM5120_UART_SIZE      0x00200000
-#define ADM5120_SRAM0_BASE     0x1FC00000
-
-#define ADM5120_NAND_BASE      ADM5120_SRAM1_BASE
-#define ADM5120_NAND_SIZE      0xB
-
-#define ADM5120_CLK_175                175000000
-#define ADM5120_CLK_200                200000000
-#define ADM5120_CLK_225                225000000
-#define ADM5120_CLK_250                250000000
-
-#define ADM5120_UART_CLOCK     62500000
-
-#endif /* _ADM5120_DEFS_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_info.h
deleted file mode 100644 (file)
index 4010001..0000000
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- *  $Id$
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_INFO_H
-#define _ADM5120_INFO_H
-
-#include <linux/types.h>
-
-extern unsigned int adm5120_prom_type;
-#define ADM5120_PROM_GENERIC   0
-#define ADM5120_PROM_CFE       1
-#define ADM5120_PROM_MYLOADER  2
-#define ADM5120_PROM_ROUTERBOOT        3
-#define ADM5120_PROM_BOOTBASE  4
-#define ADM5120_PROM_UBOOT     5
-#define ADM5120_PROM_LAST      5
-
-extern unsigned int adm5120_product_code;
-extern unsigned int adm5120_revision;
-extern unsigned int adm5120_nand_boot;
-
-extern unsigned long adm5120_speed;
-#define ADM5120_SPEED_175      175000000
-#define ADM5120_SPEED_200      200000000
-#define ADM5120_SPEED_225      225000000
-#define ADM5120_SPEED_250      250000000
-
-extern unsigned int adm5120_package;
-#define ADM5120_PACKAGE_PQFP   0
-#define ADM5120_PACKAGE_BGA    1
-
-extern unsigned long adm5120_memsize;
-
-/*
- * TODO:remove adm5120_eth* variables when the switch driver will be
- *     converted into a real platform driver
- */
-extern unsigned int adm5120_eth_num_ports;
-extern unsigned char adm5120_eth_macs[6][6];
-extern unsigned char adm5120_eth_vlans[6];
-
-extern void adm5120_soc_init(void) __init;
-extern void adm5120_mem_init(void) __init;
-extern void adm5120_ndelay(u32 ns);
-
-extern void adm5120_restart(char *command);
-extern void adm5120_halt(void);
-
-extern void (*adm5120_board_reset)(void);
-
-extern void adm5120_gpio_init(void) __init;
-extern void adm5120_gpio_csx0_enable(void) __init;
-extern void adm5120_gpio_csx1_enable(void) __init;
-extern void adm5120_gpio_ew_enable(void) __init;
-
-static inline int adm5120_package_pqfp(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_PQFP);
-}
-
-static inline int adm5120_package_bga(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_pci(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-static inline int adm5120_has_gmii(void)
-{
-       return (adm5120_package == ADM5120_PACKAGE_BGA);
-}
-
-#endif /* _ADM5120_INFO_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_intc.h
deleted file mode 100644 (file)
index e8e4d99..0000000
+++ /dev/null
@@ -1,66 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 interrupt controller definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in interrupt controller.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_INTC_H_
-#define _ADM5120_INTC_H_
-
-/*
- * INTC register offsets
- */
-#define INTC_REG_IRQ_STATUS            0x00 /* Interrupt status after masking */
-#define INTC_REG_IRQ_RAW_STATUS                0x04 /* Interrupt status before masking */
-#define INTC_REG_IRQ_ENABLE            0x08 /* Used to enable the interrupt sources */
-#define INTC_REG_IRQ_ENABLE_CLEAR      0x0C /* Used to disable the interrupt sources */
-#define INTC_REG_IRQ_DISABLE           INTC_REG_IRQ_ENABLE_CLEAR
-#define INTC_REG_INT_MODE              0x14 /* The interrupt mode of the sources */
-#define INTC_REG_FIQ_STATUS            0x18 /* FIQ status */
-#define INTC_REG_IRQ_TEST_SOURCE       0x1C
-#define INTC_REG_IRQ_SOURCE_SELECT     0x20
-#define INTC_REG_INT_LEVEL             0x24
-
-/*
- * INTC IRQ numbers
- */
-#define INTC_IRQ_TIMER 0       /* built in timer */
-#define INTC_IRQ_UART0 1       /* built-in UART0 */
-#define INTC_IRQ_UART1 2       /* built-in UART1 */
-#define INTC_IRQ_USBC  3       /* USB Host Controller */
-#define INTC_IRQ_GPIO2 4       /* GPIO line 2 */
-#define INTC_IRQ_GPIO4 5       /* GPIO line 4 */
-#define INTC_IRQ_PCI0  6       /* PCI slot 2 */
-#define INTC_IRQ_PCI1  7       /* PCI slot 3 */
-#define INTC_IRQ_PCI2  8       /* PCI slot 4 */
-#define INTC_IRQ_SWITCH        9       /* built-in ethernet switch */
-#define INTC_IRQ_LAST  INTC_IRQ_SWITCH
-#define INTC_IRQ_COUNT 10
-
-/*
- * INTC register bits
- */
-#define INTC_INT_TIMER ( 1 << INTC_IRQ_TIMER )
-#define INTC_INT_UART0 ( 1 << INTC_IRQ_UART0 )
-#define INTC_INT_UART1 ( 1 << INTC_IRQ_UART1 )
-#define INTC_INT_USBC  ( 1 << INTC_IRQ_USBC )
-#define INTC_INT_INTX0 ( 1 << INTC_IRQ_INTX0 )
-#define INTC_INT_INTX1 ( 1 << INTC_IRQ_INTX1 )
-#define INTC_INT_PCI0  ( 1 << INTC_IRQ_PCI0 )
-#define INTC_INT_PCI1  ( 1 << INTC_IRQ_PCI1 )
-#define INTC_INT_PCI2  ( 1 << INTC_IRQ_PCI2 )
-#define INTC_INT_SWITCH        ( 1 << INTC_IRQ_SWITCH )
-#define INTC_INT_ALL   (( 1 << INTC_IRQ_COUNT)-1)
-
-#endif /* _ADM5120_INTC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_irq.h
deleted file mode 100644 (file)
index 3ff69e7..0000000
+++ /dev/null
@@ -1,44 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific IRQ numbers
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef _ADM5120_IRQ_H_
-#define _ADM5120_IRQ_H_
-
-#include <asm/mach-adm5120/adm5120_intc.h>
-
-#define MIPS_IRQ_HW0           2
-#define MIPS_IRQ_COUNTER       7
-#define MIPS_IRQ_COUNT         8
-
-#define ADM5120_CPU_IRQ_BASE   0
-#define ADM5120_INTC_IRQ_BASE  (ADM5120_CPU_IRQ_BASE+MIPS_IRQ_COUNT)
-#define ADM5120_SWITCH_IRQ_BASE (ADM5120_INTC_IRQ_BASE+INTC_IRQ_COUNT)
-
-#define ADM5120_CPU_IRQ(x)     (ADM5120_CPU_IRQ_BASE + (x))
-#define ADM5120_INTC_IRQ(x)    (ADM5120_INTC_IRQ_BASE + (x))
-
-#define ADM5120_IRQ_INTC       ADM5120_CPU_IRQ(MIPS_IRQ_HW0)
-#define ADM5120_IRQ_COUNTER    ADM5120_CPU_IRQ(MIPS_IRQ_COUNTER)
-
-#define ADM5120_IRQ_TIMER      ADM5120_INTC_IRQ(INTC_IRQ_TIMER)
-#define ADM5120_IRQ_UART0      ADM5120_INTC_IRQ(INTC_IRQ_UART0)
-#define ADM5120_IRQ_UART1      ADM5120_INTC_IRQ(INTC_IRQ_UART1)
-#define ADM5120_IRQ_USBC       ADM5120_INTC_IRQ(INTC_IRQ_USBC)
-#define ADM5120_IRQ_GPIO2      ADM5120_INTC_IRQ(INTC_IRQ_GPIO2)
-#define ADM5120_IRQ_GPIO4      ADM5120_INTC_IRQ(INTC_IRQ_GPIO4)
-#define ADM5120_IRQ_PCI0       ADM5120_INTC_IRQ(INTC_IRQ_PCI0)
-#define ADM5120_IRQ_PCI1       ADM5120_INTC_IRQ(INTC_IRQ_PCI1)
-#define ADM5120_IRQ_PCI2       ADM5120_INTC_IRQ(INTC_IRQ_PCI2)
-#define ADM5120_IRQ_SWITCH     ADM5120_INTC_IRQ(INTC_IRQ_SWITCH)
-
-#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_mpmc.h
deleted file mode 100644 (file)
index accd61a..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 MPMC (Multiport Memory Controller) register definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_MPMC_H_
-#define _ADM5120_MPMC_H_
-
-#define MPMC_READ_REG(r)       __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-#define MPMC_WRITE_REG(r, v)   __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_MPMC_BASE) + MPMC_REG_ ## r)
-
-#define MPMC_REG_CTRL  0x0000
-#define MPMC_REG_STATUS        0x0004
-#define MPMC_REG_CONF  0x0008
-#define MPMC_REG_DC    0x0020
-#define MPMC_REG_DR    0x0024
-#define MPMC_REG_DRP   0x0030
-
-#define MPMC_REG_DC0   0x0100
-#define MPMC_REG_DRC0  0x0104
-#define MPMC_REG_DC1   0x0120
-#define MPMC_REG_DRC1  0x0124
-#define MPMC_REG_DC2   0x0140
-#define MPMC_REG_DRC2  0x0144
-#define MPMC_REG_DC3   0x0160
-#define MPMC_REG_DRC3  0x0164
-#define MPMC_REG_SC0   0x0200  /* for F_CS1_N */
-#define MPMC_REG_SC1   0x0220  /* for F_CS0_N */
-#define MPMC_REG_SC2    0x0240
-#define MPMC_REG_WEN2  0x0244
-#define MPMC_REG_OEN2  0x0248
-#define MPMC_REG_RD2   0x024C
-#define MPMC_REG_PG2   0x0250
-#define MPMC_REG_WR2   0x0254
-#define MPMC_REG_TN2   0x0258
-#define MPMC_REG_SC3    0x0260
-
-/* Control register bits */
-#define MPMC_CTRL_AM           ( 1 << 1 )      /* Address Mirror */
-#define MPMC_CTRL_LPM          ( 1 << 2 )      /* Low Power Mode */
-#define MPMC_CTRL_DWB          ( 1 << 3 )      /* Drain Write Buffers */
-
-/* Status register bits */
-#define MPMC_STATUS_BUSY       ( 1 << 0 )      /* Busy */
-#define MPMC_STATUS_WBS                ( 1 << 1 )      /* Write Buffer Status */
-#define MPMC_STATUS_SRA                ( 1 << 2 )      /* Self-Refresh Acknowledge*/
-
-/* Dynamic Control register bits */
-#define MPMC_DC_CE             ( 1 << 0 )
-#define MPMC_DC_DMC            ( 1 << 1 )
-#define MPMC_DC_SRR            ( 1 << 2 )
-#define MPMC_DC_SI_SHIFT       7
-#define MPMC_DC_SI_MASK                ( 3 << 7 )
-#define MPMC_DC_SI_NORMAL      ( 0 << 7 )
-#define MPMC_DC_SI_MODE                ( 1 << 7 )
-#define MPMC_DC_SI_PALL                ( 2 << 7 )
-#define MPMC_DC_SI_NOP         ( 3 << 7 )
-
-#define SRAM_REG_CONF  0x00
-#define SRAM_REG_WWE   0x04
-#define SRAM_REG_WOE   0x08
-#define SRAM_REG_WRD    0x0C
-#define SRAM_REG_WPG    0x10
-#define SRAM_REG_WWR    0x14
-#define SRAM_REG_WTR    0x18
-
-/* Dynamic Configuration register bits */
-#define DC_BE          (1 << 19) /* buffer enable */
-#define DC_RW_SHIFT    28      /* shift for number of rows */
-#define DC_RW_MASK     0x03
-#define DC_NB_SHIFT    26      /* shift for number of banks */
-#define DC_NB_MASK     0x01
-#define DC_CW_SHIFT    22      /* shift for number of columns */
-#define DC_CW_MASK     0x07
-#define DC_DW_SHIFT    7       /* shift for device width */
-#define DC_DW_MASK     0x03
-
-/* Static Configuration register bits */
-#define SC_MW_MASK     0x03    /* memory width mask */
-#define SC_MW_8                0x00    /* 8 bit memory width */
-#define SC_MW_16       0x01    /* 16 bit memory width */
-#define SC_MW_32       0x02    /* 32 bit memory width */
-
-#endif /* _ADM5120_MPMC_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_nand.h
deleted file mode 100644 (file)
index 0c10629..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- *  ADM5120 NAND interface definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in NAND interface.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  NAND interface routines was based on a driver for Linux 2.6.19+ which
- *  was derived from the driver for Linux 2.4.xx published by Mikrotik for
- *  their RouterBoard 1xx and 5xx series boards.
- *    Copyright (C) 2007 David Goodenough <david.goodenough@linkchoose.co.uk>
- *    Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *    The original Mikrotik code seems not to have a license.
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_NAND_H_
-#define _ADM5120_NAND_H_
-
-#include <linux/types.h>
-#include <linux/io.h>
-
-#include <adm5120_defs.h>
-#include <adm5120_switch.h>
-
-/* NAND control registers */
-#define NAND_REG_DATA          0x0 /* data register */
-#define NAND_REG_SET_CEn       0x1 /* CE# low */
-#define NAND_REG_CLR_CEn       0x2 /* CE# high */
-#define NAND_REG_CLR_CLE       0x3 /* CLE low */
-#define NAND_REG_SET_CLE       0x4 /* CLE high */
-#define NAND_REG_CLR_ALE       0x5 /* ALE low */
-#define NAND_REG_SET_ALE       0x6 /* ALE high */
-#define NAND_REG_SET_SPn       0x7 /* SP# low (use spare area) */
-#define NAND_REG_CLR_SPn       0x8 /* SP# high (do not use spare area) */
-#define NAND_REG_SET_WPn       0x9 /* WP# low */
-#define NAND_REG_CLR_WPn       0xA /* WP# high */
-#define NAND_REG_STATUS                0xB /* Status register */
-
-#define ADM5120_NAND_STATUS_READY      0x80
-
-#define NAND_READ_REG(r) \
-       readb((void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-#define NAND_WRITE_REG(r, v) \
-       writeb((v),(void __iomem *)KSEG1ADDR(ADM5120_NAND_BASE) + (r))
-
-/*-------------------------------------------------------------------------*/
-
-static inline void adm5120_nand_enable(void)
-{
-       SW_WRITE_REG(SWITCH_REG_BW_CNTL1, BW_CNTL1_NAND_ENABLE);
-       SW_WRITE_REG(SWITCH_REG_BOOT_DONE, 1);
-}
-
-static inline void adm5120_nand_set_wpn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_WPn : NAND_REG_CLR_WPn, 1);
-}
-
-static inline void adm5120_nand_set_spn(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_SPn : NAND_REG_CLR_SPn, 1);
-}
-
-static inline void adm5120_nand_set_cle(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CLE : NAND_REG_CLR_CLE, 1);
-}
-
-static inline void adm5120_nand_set_ale(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_ALE : NAND_REG_CLR_ALE, 1);
-}
-
-static inline void adm5120_nand_set_cen(unsigned int set)
-{
-       NAND_WRITE_REG((set) ? NAND_REG_SET_CEn : NAND_REG_CLR_CEn, 1);
-}
-
-static inline u8 adm5120_nand_get_status(void)
-{
-       return NAND_READ_REG(NAND_REG_STATUS);
-}
-
-#endif /* _ADM5120_NAND_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_platform.h
deleted file mode 100644 (file)
index d3b2213..0000000
+++ /dev/null
@@ -1,95 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific platform definitions
- *
- *  Copyright (C) 2007-2008 OpenWrt.org
- *  Copyright (C) 2007-2008 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_PLATFORM_H_
-#define _ADM5120_PLATFORM_H_
-
-#include <linux/device.h>
-#include <linux/platform_device.h>
-
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/map.h>
-#include <linux/mtd/partitions.h>
-#include <linux/mtd/nand.h>
-
-#include <linux/input.h>
-#include <linux/gpio_buttons.h>
-
-#include <linux/amba/bus.h>
-#include <linux/amba/serial.h>
-
-struct adm5120_flash_platform_data {
-       void                    (*set_vpp)(struct map_info *, int);
-       void                    (*switch_bank)(unsigned);
-       u32                     window_size;
-#ifdef CONFIG_MTD_PARTITIONS
-       unsigned int            nr_parts;
-       struct mtd_partition    *parts;
-#endif
-};
-
-struct adm5120_switch_platform_data {
-       /* TODO: not yet implemented */
-};
-
-struct adm5120_pci_irq {
-       u8      slot;
-       u8      func;
-       u8      pin;
-       unsigned irq;
-};
-
-#define PCIIRQ(s,f,p,i) {.slot = (s), .func = (f), .pin  = (p), .irq  = (i)}
-
-#ifdef CONFIG_PCI
-extern void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map) __init;
-#else
-static inline void adm5120_pci_set_irq_map(unsigned int nr_irqs,
-               struct adm5120_pci_irq *map)
-{
-}
-#endif
-
-#define ADM5120_NUM_BUTTONS    5
-
-extern struct resource adm5120_gpiodev_resource;
-
-extern struct adm5120_flash_platform_data adm5120_flash0_data;
-extern struct adm5120_flash_platform_data adm5120_flash1_data;
-extern struct platform_nand_data adm5120_nand_data;
-extern struct adm5120_switch_platform_data adm5120_switch_data;
-extern struct gpio_button adm5120_buttons[ADM5120_NUM_BUTTONS];
-extern struct gpio_buttons_platform_data adm5120_buttons_data;
-extern struct amba_pl010_data adm5120_uart0_data;
-extern struct amba_pl010_data adm5120_uart1_data;
-
-extern struct platform_device adm5120_flash0_device;
-extern struct platform_device adm5120_flash1_device;
-extern struct platform_device adm5120_nand_device;
-extern struct platform_device adm5120_hcd_device;
-extern struct platform_device adm5120_switch_device;
-extern struct platform_device adm5120_buttons_device;
-extern struct platform_device adm5120_gpiodev_device;
-extern struct amba_device adm5120_uart0_device;
-extern struct amba_device adm5120_uart1_device;
-
-extern void adm5120_uart_set_mctrl(struct amba_device *dev, void __iomem *base,
-               unsigned int mctrl);
-
-extern void adm5120_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-               unsigned int ctrl);
-extern int adm5120_nand_ready(struct mtd_info *mtd);
-
-#endif /* _ADM5120_PLATFORM_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_switch.h
deleted file mode 100644 (file)
index 2dbb097..0000000
+++ /dev/null
@@ -1,303 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 ethernet switch definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in Ethernet switch.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_SWITCH_H_
-#define _ADM5120_SWITCH_H_
-
-#ifndef BIT
-#  define BIT(at)      (1 << (at))
-#endif
-#define BITMASK(len)   (BIT(len)-1)
-
-#define SW_READ_REG(r)         __raw_readl( \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-#define SW_WRITE_REG(r, v)     __raw_writel((v), \
-       (void __iomem *)KSEG1ADDR(ADM5120_SWITCH_BASE) + r)
-
-/* Switch register offsets */
-#define SWITCH_REG_CODE                0x0000
-#define SWITCH_REG_SOFT_RESET  0x0004  /* Soft Reset */
-#define SWITCH_REG_BOOT_DONE   0x0008  /* Boot Done */
-#define SWITCH_REG_SW_RESET    0x000C  /* Switch Reset */
-#define SWITCH_REG_PHY_STATUS  0x0014  /* PHY Status */
-#define SWITCH_REG_MEMCTRL     0x001C  /* Memory Control */
-#define SWITCH_REG_CPUP_CONF   0x0024  /* CPU Port Configuration */
-#define SWITCH_REG_PORT_CONF0  0x0028  /* Port Configuration 0 */
-#define SWITCH_REG_PORT_CONF1  0x002C  /* Port Configuration 1 */
-#define SWITCH_REG_PORT_CONF2  0x0030  /* Port Configuration 2 */
-#define SWITCH_REG_VLAN_G1     0x0040  /* VLAN group 1 */
-#define SWITCH_REG_VLAN_G2     0x0044  /* VLAN group 2 */
-#define SWITCH_REG_SEND_TRIG   0x0048  /* Send Trigger */
-#define SWITCH_REG_MAC_WT0     0x0058  /* MAC Write Address 0 */
-#define SWITCH_REG_MAC_WT1     0x005C  /* MAC Write Address 1 */
-#define SWITCH_REG_BW_CNTL0    0x0060  /* Bandwidth Control 0 */
-#define SWITCH_REG_BW_CNTL1    0x0064  /* Bandwidth Control 1 */
-#define SWITCH_REG_PHY_CNTL0   0x0068  /* PHY Control 0 */
-#define SWITCH_REG_PHY_CNTL1   0x006C  /* PHY Control 1 */
-#define SWITCH_REG_PORT_TH     0x0078  /* Port Threshold */
-#define SWITCH_REG_PHY_CNTL2   0x007C  /* PHY Control 2 */
-#define SWITCH_REG_PHY_CNTL3   0x0080  /* PHY Control 3 */
-#define SWITCH_REG_PRI_CNTL    0x0084  /* Priority Control */
-#define SWITCH_REG_PHY_CNTL4   0x00A0  /* PHY Control 4 */
-#define SWITCH_REG_EMPTY_CNT   0x00A4  /* Empty Count */
-#define SWITCH_REG_PORT_CNTLS  0x00A8  /* Port Control Select */
-#define SWITCH_REG_PORT_CNTL   0x00AC  /* Port Control */
-#define SWITCH_REG_INT_STATUS  0x00B0  /* Interrupt Status */
-#define SWITCH_REG_INT_MASK    0x00B4  /* Interrupt Mask */
-#define SWITCH_REG_GPIO_CONF0  0x00B8  /* GPIO Configuration 0 */
-#define SWITCH_REG_GPIO_CONF2  0x00BC  /* GPIO Configuration 1 */
-#define SWITCH_REG_WDOG0       0x00C0  /* Watchdog 0 */
-#define SWITCH_REG_WDOG1       0x00C4  /* Watchdog 1 */
-
-#define SWITCH_REG_SHDA                0x00D0  /* Send High Descriptors Address */
-#define SWITCH_REG_SLDA                0x00D4  /* Send Low Descriptors Address */
-#define SWITCH_REG_RHDA                0x00D8  /* Receive High Descriptor Address */
-#define SWITCH_REG_RLDA                0x00DC  /* Receive Low Descriptor Address */
-#define SWITCH_REG_SHWA                0x00E0  /* Send High Working Address */
-#define SWITCH_REG_SLWA                0x00E4  /* Send Low Working Address */
-#define SWITCH_REG_RHWA                0x00E8  /* Receive High Working Address */
-#define SWITCH_REG_RLWA                0x00EC  /* Receive Low Working Address */
-
-#define SWITCH_REG_TIMER_INT   0x00F0  /* Timer */
-#define SWITCH_REG_TIMER       0x00F4  /* Timer Interrupt */
-
-#define SWITCH_REG_PORT0_LED   0x0100
-#define SWITCH_REG_PORT1_LED   0x0104
-#define SWITCH_REG_PORT2_LED   0x0108
-#define SWITCH_REG_PORT3_LED   0x010C
-#define SWITCH_REG_PORT4_LED   0x0110
-
-/* CODE register bits */
-#define CODE_PC_MASK           BITMASK(16)     /* Product Code */
-#define CODE_REV_SHIFT         16
-#define CODE_REV_MASK          BITMASK(4)      /* Product Revision */
-#define CODE_CLKS_SHIFT                20
-#define CODE_CLKS_MASK         BITMASK(2)      /* Clock Speed */
-#define CODE_CLKS_175          0               /* 175 MHz */
-#define CODE_CLKS_200          1               /* 200 MHz */
-#define CODE_CLKS_225          2               /* 225 MHz */
-#define CODE_CLKS_250          3               /* 250 MHz */
-#define CODE_NAB               BIT(24)         /* NAND boot */
-#define CODE_PK_MASK           BITMASK(1)      /* Package type */
-#define CODE_PK_SHIFT          29
-#define CODE_PK_BGA            0               /* BGA package */
-#define CODE_PK_PQFP           1               /* PQFP package */
-
-/* MEMCTRL register bits */
-#define MEMCTRL_SDRS_MASK      BITMASK(3)      /* SDRAM bank size */
-#define MEMCTRL_SDRS_4M                0x01
-#define MEMCTRL_SDRS_8M                0x02
-#define MEMCTRL_SDRS_16M       0x03
-#define MEMCTRL_SDRS_64M       0x04
-#define MEMCTRL_SDRS_128M      0x05
-#define MEMCTRL_SDR1_ENABLE    BIT(5)          /* enable SDRAM bank 1 */
-
-#define MEMCTRL_SRS0_SHIFT     8               /* shift for SRAM0 size */
-#define MEMCTRL_SRS1_SHIFT     16              /* shift for SRAM1 size */
-#define MEMCTRL_SRS_MASK       BITMASK(3)      /* SRAM size mask */
-#define MEMCTRL_SRS_DISABLED   0x00            /* Disabled */
-#define MEMCTRL_SRS_512K       0x01            /* 512KB*/
-#define MEMCTRL_SRS_1M         0x02            /* 1MB */
-#define MEMCTRL_SRS_2M         0x03            /* 2MB */
-#define MEMCTRL_SRS_4M         0x04            /* 4MB */
-
-/* Port bits used in various registers */
-#define SWITCH_PORT_PHY0       BIT(0)
-#define SWITCH_PORT_PHY1       BIT(1)
-#define SWITCH_PORT_PHY2       BIT(2)
-#define SWITCH_PORT_PHY3       BIT(3)
-#define SWITCH_PORT_PHY4       BIT(4)
-#define SWITCH_PORT_MII                BIT(5)
-#define SWITCH_PORT_CPU                BIT(6)
-
-/* Port bit shorthands */
-#define SWITCH_PORTS_PHY       0x1F    /* phy ports */
-#define SWITCH_PORTS_NOCPU     0x3F    /* physical ports */
-#define SWITCH_PORTS_ALL       0x7F    /* all ports */
-
-/* CPUP_CONF register bits */
-#define CPUP_CONF_DCPUP                BIT(0)  /* Disable CPU port */
-#define CPUP_CONF_CRCP         BIT(1)  /* CRC padding from CPU */
-#define CPUP_CONF_BTM          BIT(2)  /* Bridge Testing Mode */
-#define CPUP_CONF_DUNP_SHIFT   9       /* Disable Unknown Packets for portX */
-#define CPUP_CONF_DMCP_SHIFT   16      /* Disable Mcast Packets form portX */
-#define CPUP_CONF_DBCP_SHIFT   24      /* Disable Bcast Packets form portX */
-
-/* PORT_CONF0 register bits */
-#define PORT_CONF0_DP_SHIFT    0       /* Disable Port */
-#define PORT_CONF0_EMCP_SHIFT  8       /* Enable All MC Packets */
-#define PORT_CONF0_BP_SHIFT    16      /* Enable Back Pressure */
-
-/* PORT_CONF1 register bits */
-#define PORT_CONF1_DISL_SHIFT  0       /* Disable Learning */
-#define PORT_CONF1_BS_SHIFT    6       /* Blocking State */
-#define PORT_CONF1_BM_SHIFT    12      /* Blocking Mode */
-
-/* SEND_TRIG register bits */
-#define SEND_TRIG_STL          BIT(0)  /* Send Trigger Low */
-#define SEND_TRIG_STH          BIT(1)  /* Send Trigger High */
-
-/* MAC_WT0 register bits */
-#define MAC_WT0_MAWC           BIT(0)  /* MAC address write command */
-#define MAC_WT0_MWD_SHIFT      1
-#define MAC_WT0_MWD            BIT(1)  /* MAC write done */
-#define MAC_WT0_WFB            BIT(2)  /* Write Filter Bit */
-#define MAC_WT0_WVN_SHIFT      3       /* Write Vlan Number shift */
-#define MAC_WT0_WVE            BIT(6)  /* Write VLAN enable */
-#define MAC_WT0_WPMN_SHIFT     7
-#define MAC_WT0_WAF_SHIFT      13      /* Write Age Field shift */
-#define MAC_WT0_WAF_EMPTY      0
-#define MAC_WT0_WAF_STATIC     7       /* age: static */
-#define MAC_WT0_MAC0_SHIFT     16
-#define MAC_WT0_MAC1_SHIFT     24
-
-/* MAC_WT1 register bits */
-#define MAC_WT1_MAC2_SHIFT     0
-#define MAC_WT1_MAC3_SHIFT     8
-#define MAC_WT1_MAC4_SHIFT     16
-#define MAC_WT1_MAC5_SHIFT     24
-
-/* BW_CNTL0/BW_CNTL1 register bits */
-#define BW_CNTL_DISABLE                0x00
-#define BW_CNTL_64K            0x01
-#define BW_CNTL_128K           0x02
-#define BW_CNTL_256K           0x03
-#define BW_CNTL_512K           0x04
-#define BW_CNTL_1M             0x05
-#define BW_CNTL_4M             0x06
-#define BW_CNTL_10M            0x07
-
-#define P4TBC_SHIFT            0
-#define P4RBC_SHIFT            4
-#define P5TBC_SHIFT            8
-#define P5RBC_SHIFT            12
-
-#define BW_CNTL1_NAND_ENABLE   0x100
-
-/* PHY_CNTL0 register bits */
-#define PHY_CNTL0_PHYA_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_MASK    BITMASK(5)
-#define PHY_CNTL0_PHYR_SHIFT   8
-#define PHY_CNTL0_WC           BIT(13)         /* Write Command */
-#define PHY_CNTL0_RC           BIT(14)         /* Read Command */
-#define PHY_CNTL0_WTD_MASK     BIT(16)         /* Read Command */
-#define PHY_CNTL0_WTD_SHIFT    16
-
-/* PHY_CNTL1 register bits */
-#define PHY_CNTL1_WOD          BIT(0)          /* Write Operation Done */
-#define PHY_CNTL1_ROD          BIT(1)          /* Read Operation Done */
-#define PHY_CNTL1_RD_MASK      BITMASK(16)
-#define PHY_CNTL1_RD_SHIFT     16
-
-/* PHY_CNTL2 register bits */
-#define PHY_CNTL2_ANE_SHIFT    0       /* Auto Negotiation Enable */
-#define PHY_CNTL2_SC_SHIFT     5       /* Speed Control */
-#define PHY_CNTL2_DC_SHIFT     10      /* Duplex Control */
-#define PHY_CNTL2_FNCV_SHIFT   15      /* Recommended FC Value */
-#define PHY_CNTL2_PHYR_SHIFT   20      /* PHY reset */
-#define PHY_CNTL2_AMDIX_SHIFT  25      /* Auto MDIX enable */
-/* PHY_CNTL2_RMAE is bad in datasheet */
-#define PHY_CNTL2_RMAE         BIT(31) /* Recommended MCC Average enable */
-
-/* PHY_CNTL3 register bits */
-#define PHY_CNTL3_RNT          BIT(10) /* Recommend Normal Threshold */
-
-/* PORT_TH register bits */
-#define PORT_TH_PPT_MASK       BITMASK(8)      /* Per Port Threshold */
-#define PORT_TH_CPUT_SHIFT     8               /* CPU Port Buffer Threshold */
-#define PORT_TH_CPUT_MASK      BITMASK(8)
-#define PORT_TH_CPUHT_SHIFT    16              /* CPU Hold Threshold */
-#define PORT_TH_CPUHT_MASK     BITMASK(8)
-#define PORT_TH_CPURT_SHIFT    24              /* CPU Release Threshold */
-#define PORT_TH_CPURT_MASK     BITMASK(8)
-
-/* EMPTY_CNT register bits */
-#define EMPTY_CNT_EBGB_MASK    BITMASK(9) /* Empty Blocks in the Global Buffer */
-
-/* GPIO_CONF0 register bits */
-#define GPIO_CONF0_MASK                BITMASK(8)
-#define GPIO_CONF0_IM_SHIFT    0
-#define GPIO_CONF0_IV_SHIFT    8
-#define GPIO_CONF0_OE_SHIFT    16
-#define GPIO_CONF0_OV_SHIFT    24
-#define GPIO_CONF0_IM_MASK     (0xFF << GPIO_CONF0_IM_SHIFT)
-#define GPIO_CONF0_IV_MASK     (0xFF << GPIO_CONF0_IV_SHIFT)
-#define GPIO_CONF0_OE_MASK     (0xFF << GPIO_CONF0_OE_SHIFT)
-#define GPIO_CONF0_OV_MASK     (0xFF << GPIO_CONF0_OV_SHIFT)
-
-/* GPIO_CONF2 register bits */
-#define GPIO_CONF2_CSX0                BIT(4)  /* enable CSX0:INTX0 on GPIO 1:2 */
-#define GPIO_CONF2_CSX1                BIT(5)  /* enable CSX1:INTX1 on GPIO 3:4 */
-#define GPIO_CONF2_EW          BIT(6)  /* enable wait state pin for CSX0/1 */
-
-/* INT_STATUS/INT_MASK register bits */
-#define SWITCH_INT_SHD         BIT(0)  /* Send High Done */
-#define SWITCH_INT_SLD         BIT(1)  /* Send Low Done */
-#define SWITCH_INT_RHD         BIT(2)  /* Receive High Done */
-#define SWITCH_INT_RLD         BIT(3)  /* Receive Low Done */
-#define SWITCH_INT_HDF         BIT(4)  /* High Descriptor Full */
-#define SWITCH_INT_LDF         BIT(5)  /* Low Descriptor Full */
-#define SWITCH_INT_P0QF                BIT(6)  /* Port0 Queue Full */
-#define SWITCH_INT_P1QF                BIT(7)  /* Port1 Queue Full */
-#define SWITCH_INT_P2QF                BIT(8)  /* Port2 Queue Full */
-#define SWITCH_INT_P3QF                BIT(9)  /* Port3 Queue Full */
-#define SWITCH_INT_P4QF                BIT(10) /* Port4 Queue Full */
-#define SWITCH_INT_P5QF                BIT(11) /* Port5 Queue Full */
-#define SWITCH_INT_CPQF                BIT(13) /* CPU Queue Full */
-#define SWITCH_INT_GQF         BIT(14) /* Global Queue Full */
-#define SWITCH_INT_MD          BIT(15) /* Must Drop */
-#define SWITCH_INT_BCS         BIT(16) /* BC Storm */
-#define SWITCH_INT_PSC         BIT(18) /* Port Status Change */
-#define SWITCH_INT_ID          BIT(19) /* Intruder Detected */
-#define SWITCH_INT_W0TE                BIT(20) /* Watchdog 0 Timer Expired */
-#define SWITCH_INT_W1TE                BIT(21) /* Watchdog 1 Timer Expired */
-#define SWITCH_INT_RDE         BIT(22) /* Receive Descriptor Error */
-#define SWITCH_INT_SDE         BIT(23) /* Send Descriptor Error */
-#define SWITCH_INT_CPUH                BIT(24) /* CPU Hold */
-
-/* TIMER_INT register bits */
-#define TIMER_INT_TOS          BIT(0)  /* time-out status */
-#define TIMER_INT_TOM          BIT(16) /* mask time-out interrupt */
-
-/* TIMER register bits */
-#define TIMER_PERIOD_MASK      BITMASK(16)     /* mask for timer period */
-#define TIMER_PERIOD_DEFAULT   0xFFFF          /* default timer period */
-#define TIMER_TE               BIT(16) /* timer enable bit */
-
-/* PORTx_LED register bits */
-#define LED_MODE_MASK          BITMASK(4)
-#define LED_MODE_INPUT         0
-#define LED_MODE_FLASH         1
-#define LED_MODE_OUT_HIGH      2
-#define LED_MODE_OUT_LOW       3
-#define LED_MODE_LINK          4
-#define LED_MODE_SPEED         5
-#define LED_MODE_DUPLEX                6
-#define LED_MODE_ACT           7
-#define LED_MODE_COLL          8
-#define LED_MODE_LINK_ACT      9
-#define LED_MODE_DUPLEX_COLL   10
-#define LED_MODE_10M_ACT       11
-#define LED_MODE_100M_ACT      12
-#define LED0_MODE_SHIFT                0       /* LED0 mode shift */
-#define LED1_MODE_SHIFT                4       /* LED1 mode shift */
-#define LED2_MODE_SHIFT                8       /* LED2 mode shift */
-#define LED0_IV_SHIFT          12      /* LED0 input value shift */
-#define LED1_IV_SHIFT          13      /* LED1 input value shift */
-#define LED2_IV_SHIFT          14      /* LED2 input value shift */
-
-#endif /* _ADM5120_SWITCH_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/adm5120_uart.h
deleted file mode 100644 (file)
index 09db7d8..0000000
+++ /dev/null
@@ -1,65 +0,0 @@
-/*
- *  ADM5120 UART definitions
- *
- *  This header file defines the hardware registers of the ADM5120 SoC
- *  built-in UARTs.
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_UART_H_
-#define _ADM5120_UART_H_
-
-#define UART_BAUDDIV(clk, baud) ((clk/(16 * (baud)))-1)
-
-#define UART_REG_DATA  0x00
-#define UART_REG_RSR   0x04
-#define UART_REG_ECR   UART_REG_RSR
-#define UART_REG_LCRH  0x08
-#define UART_REG_LCRM  0x0C
-#define UART_REG_LCRL  0x10
-#define UART_REG_CTRL  0x14
-#define UART_REG_FLAG  0x18
-
-/* Receive Status Register bits */
-#define UART_RSR_FE    ( 1 << 0 )
-#define UART_RSR_PE    ( 1 << 1 )
-#define UART_RSR_BE    ( 1 << 2 )
-#define UART_RSR_OE    ( 1 << 3 )
-#define UART_RSR_ERR   ( UART_RSR_FE | UART_RSR_PE | UART_RSR_BE )
-
-#define UART_ECR_ALL   0xFF
-
-/* Line Control High register bits */
-#define UART_LCRH_BRK  ( 1 << 0 ) /* send break */
-#define UART_LCRH_PEN  ( 1 << 1 ) /* parity enable */
-#define UART_LCRH_EPS  ( 1 << 2 ) /* even parity select */
-#define UART_LCRH_STP1 ( 0 << 3 ) /* one stop bits select */
-#define UART_LCRH_STP2 ( 1 << 3 ) /* two stop bits select */
-#define UART_LCRH_FEN  ( 1 << 4 ) /* FIFO enable */
-
-#define UART_LCRH_WLEN5        ( 0 << 5 )
-#define UART_LCRH_WLEN6        ( 1 << 5 )
-#define UART_LCRH_WLEN7        ( 2 << 5 )
-#define UART_LCRH_WLEN8        ( 3 << 5 )
-
-/* Control register bits */
-#define UART_CTRL_EN   ( 1 << 0 )
-
-/* Flag register bits */
-#define UART_FLAG_CTS  ( 1 << 0 )
-#define UART_FLAG_DSR  ( 1 << 1 )
-#define UART_FLAG_DCD  ( 1 << 2 )
-#define UART_FLAG_BUSY ( 1 << 3 )
-#define UART_FLAG_RXFE ( 1 << 4 )
-#define UART_FLAG_TXFF ( 1 << 5 )
-#define UART_FLAG_RXFF ( 1 << 6 )
-#define UART_FLAG_TXFE ( 1 << 7 )
-
-#endif /* _ADM5120_UART_H_ */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/asm/sizes.h
deleted file mode 100644 (file)
index 503843d..0000000
+++ /dev/null
@@ -1,56 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
- */
-/* DO NOT EDIT!! - this file automatically generated
- *                 from .s file by awk -f s2h.awk
- */
-/*  Size definitions
- *  Copyright (C) ARM Limited 1998. All rights reserved.
- */
-
-#ifndef __sizes_h
-#define __sizes_h                       1
-
-/* handy sizes */
-#define SZ_16                          0x00000010
-#define SZ_256                         0x00000100
-#define SZ_512                         0x00000200
-
-#define SZ_1K                           0x00000400
-#define SZ_4K                           0x00001000
-#define SZ_8K                           0x00002000
-#define SZ_16K                          0x00004000
-#define SZ_64K                          0x00010000
-#define SZ_128K                         0x00020000
-#define SZ_256K                         0x00040000
-#define SZ_512K                         0x00080000
-
-#define SZ_1M                           0x00100000
-#define SZ_2M                           0x00200000
-#define SZ_4M                           0x00400000
-#define SZ_8M                           0x00800000
-#define SZ_16M                          0x01000000
-#define SZ_32M                          0x02000000
-#define SZ_64M                          0x04000000
-#define SZ_128M                         0x08000000
-#define SZ_256M                         0x10000000
-#define SZ_512M                         0x20000000
-
-#define SZ_1G                           0x40000000
-#define SZ_2G                           0x80000000
-
-#endif
-
-/*         END */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/cpu-feature-overrides.h
deleted file mode 100644 (file)
index 1ca5559..0000000
+++ /dev/null
@@ -1,79 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 specific CPU feature overrides
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This file was derived from: include/asm-mips/cpu-features.h
- *     Copyright (C) 2003, 2004 Ralf Baechle
- *     Copyright (C) 2004 Maciej W. Rozycki
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-#ifndef __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-#define __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H
-
-#ifdef CONFIG_ADM5120_CPU_OVERRIDES
-
-/*
- * The ADM5120 SOC has a built-in MIPS 4Kc core.
- */
-#define cpu_has_tlb                    1
-#define cpu_has_4kex                   1
-#define cpu_has_3k_cache               0
-#define cpu_has_4k_cache               1
-#define cpu_has_tx39_cache             0
-#define cpu_has_sb1_cache              0
-#define cpu_has_fpu                    0
-#define cpu_has_32fpr                  0
-#define cpu_has_counter                        1
-#define cpu_has_watch                  1
-#define cpu_has_divec                  1
-/* #define cpu_has_vce                 ? */
-/* #define cpu_has_cache_cdex_p                ? */
-/* #define cpu_has_cache_cdex_s                ? */
-#define cpu_has_prefetch               1
-/* #define cpu_has_mcheck              ? */
-#define cpu_has_ejtag                  1
-#define cpu_has_llsc                   1
-
-#define cpu_has_mips16                 0
-#define cpu_has_mdmx                   0
-#define cpu_has_mips3d                 0
-#define cpu_has_smartmips              0
-
-/* #define cpu_has_vtag_icache         ? */
-/* #define cpu_has_dc_aliases          ? */
-/* #define cpu_has_ic_fills_f_dc       ? */
-/* #define cpu_has_pindexed_dcache     ? */
-
-/* #define cpu_icache_snoops_remote_store      ? */
-
-#define cpu_has_mips32r1               1
-#define cpu_has_mips32r2               0
-#define cpu_has_mips64r1               0
-#define cpu_has_mips64r2               0
-
-#define cpu_has_dsp                    0
-#define cpu_has_mipsmt                 0
-
-/* #define cpu_has_nofpuex             ? */
-#define cpu_has_64bits                 0
-#define cpu_has_64bit_zero_reg         0
-#define cpu_has_64bit_gp_regs          0
-#define cpu_has_64bit_addresses                0
-
-/* #define cpu_has_inclusive_pcaches   ? */
-
-#define cpu_dcache_line_size()         16
-#define cpu_icache_line_size()         16
-
-#endif  /* CONFIG_ADM5120_CPU_OVERRIDES */
-
-
-#endif /* __ASM_MACH_ADM5120_CPU_FEATURE_OVERRIDES_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/gpio.h
deleted file mode 100644 (file)
index 1075d21..0000000
+++ /dev/null
@@ -1,115 +0,0 @@
-/*
- *  $Id$
- *
- *  ADM5120 GPIO wrappers for arch-neutral GPIO calls
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ADM5120_GPIO_H_
-#define _ADM5120_GPIO_H_
-
-#include <asm/mach-adm5120/adm5120_switch.h>
-
-#define ADM5120_GPIO_PIN0      0
-#define ADM5120_GPIO_PIN1      1
-#define ADM5120_GPIO_PIN2      2
-#define ADM5120_GPIO_PIN3      3
-#define ADM5120_GPIO_PIN4      4
-#define ADM5120_GPIO_PIN5      5
-#define ADM5120_GPIO_PIN6      6
-#define ADM5120_GPIO_PIN7      7
-#define ADM5120_GPIO_P0L0      8
-#define ADM5120_GPIO_P0L1      9
-#define ADM5120_GPIO_P0L2      10
-#define ADM5120_GPIO_P1L0      11
-#define ADM5120_GPIO_P1L1      12
-#define ADM5120_GPIO_P1L2      13
-#define ADM5120_GPIO_P2L0      14
-#define ADM5120_GPIO_P2L1      15
-#define ADM5120_GPIO_P2L2      16
-#define ADM5120_GPIO_P3L0      17
-#define ADM5120_GPIO_P3L1      18
-#define ADM5120_GPIO_P3L2      19
-#define ADM5120_GPIO_P4L0      20
-#define ADM5120_GPIO_P4L1      21
-#define ADM5120_GPIO_P4L2      22
-#define ADM5120_GPIO_MAX       22
-#define ADM5120_GPIO_COUNT     ADM5120_GPIO_MAX+1
-
-#define ADM5120_GPIO_LOW       0
-#define ADM5120_GPIO_HIGH      1
-
-#define ADM5120_GPIO_SWITCH    0x10
-#define ADM5120_GPIO_FLASH     (ADM5120_GPIO_SWITCH | LED_MODE_FLASH)
-#define ADM5120_GPIO_LINK      (ADM5120_GPIO_SWITCH | LED_MODE_LINK)
-#define ADM5120_GPIO_SPEED     (ADM5120_GPIO_SWITCH | LED_MODE_SPEED)
-#define ADM5120_GPIO_DUPLEX    (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX)
-#define ADM5120_GPIO_ACT       (ADM5120_GPIO_SWITCH | LED_MODE_ACT)
-#define ADM5120_GPIO_COLL      (ADM5120_GPIO_SWITCH | LED_MODE_COLL)
-#define ADM5120_GPIO_LINK_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_LINK_ACT)
-#define ADM5120_GPIO_DUPLEX_COLL (ADM5120_GPIO_SWITCH | LED_MODE_DUPLEX_COLL)
-#define ADM5120_GPIO_10M_ACT   (ADM5120_GPIO_SWITCH | LED_MODE_10M_ACT)
-#define ADM5120_GPIO_100M_ACT  (ADM5120_GPIO_SWITCH | LED_MODE_100M_ACT)
-
-extern int adm5120_gpio_direction_input(unsigned gpio);
-extern int adm5120_gpio_direction_output(unsigned gpio, int value);
-extern int adm5120_gpio_get_value(unsigned gpio);
-extern void adm5120_gpio_set_value(unsigned gpio, int value);
-extern int adm5120_gpio_request(unsigned gpio, const char *label);
-extern void adm5120_gpio_free(unsigned gpio);
-extern int adm5120_gpio_to_irq(unsigned gpio);
-extern int adm5120_irq_to_gpio(unsigned irq);
-
-/*
- * Wrappers for the generic GPIO layer
- */
-static inline int gpio_direction_input(unsigned gpio)
-{
-       return adm5120_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
-       return adm5120_gpio_direction_output(gpio,value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
-       return adm5120_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
-       adm5120_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
-       return adm5120_gpio_request(gpio, label);
-}
-
-static inline void gpio_free(unsigned gpio)
-{
-       adm5120_gpio_free(gpio);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
-       return adm5120_gpio_to_irq(gpio);
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
-       return adm5120_irq_to_gpio(irq);
-}
-
-#include <asm-generic/gpio.h> /* cansleep wrappers */
-
-#endif
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/cfe.h
deleted file mode 100644 (file)
index 9d122bb..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  $Id$
- *
- *  Broadcom's CFE definitions
- *
- *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- *  Copyright (C) 2007 OpenWrt.org
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_CFE_H_
-#define _PROM_CFE_H_
-
-extern int cfe_present(void) __init;
-extern char *cfe_getenv(char *);
-
-#endif /*_PROM_CFE_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/generic.h
deleted file mode 100644 (file)
index 3cebd57..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
-/*
- *  $Id$
- *
- *  Generic prom definitions
- *
- *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- *  Copyright (C) 2007 OpenWrt.org
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _PROM_GENERIC_H_
-#define _PROM_GENERIC_H_
-
-extern int generic_prom_present(void) __init;
-extern char *generic_prom_getenv(char *);
-
-#endif /*_PROM_GENERIC_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/myloader.h
deleted file mode 100644 (file)
index 5736a44..0000000
+++ /dev/null
@@ -1,181 +0,0 @@
-/*
- *  $Id$
- *
- *  Compex's MyLoader specific definitions
- *
- *  Copyright (C) 2006,2007 Gabor Juhos <juhosg at openwrt.org>
- *  Copyright (C) 2007 OpenWrt.org
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _MYLOADER_H_
-#define _MYLOADER_H_
-
-/*
- * Firmware file format:
- *
- *     <header>
- *     [<block descriptor 0>]
- *     ...
- *     [<block descriptor n>]
- *     <null block descriptor>
- *     [<block data 0>]
- *     ...
- *     [<block data n>]
- *
- *
- */
-
-/* Myloader specific magic numbers */
-#define MYLO_MAGIC_FIRMWARE    0x4C594D00
-#define MYLO_MAGIC_20021103    0x20021103
-#define MYLO_MAGIC_20021107    0x20021107
-
-#define MYLO_MAGIC_SYS_PARAMS  MYLO_MAGIC_20021107
-#define MYLO_MAGIC_PARTITIONS  MYLO_MAGIC_20021103
-#define MYLO_MAGIC_BOARD_PARAMS        MYLO_MAGIC_20021103
-
-/*
- * Addresses of the data structures provided by MyLoader
- */
-#define MYLO_MIPS_SYS_PARAMS   0x80000800      /* System Parameters */
-#define MYLO_MIPS_BOARD_PARAMS 0x80000A00      /* Board Parameters */
-#define MYLO_MIPS_PARTITIONS   0x80000C00      /* Partition Table */
-#define MYLO_MIPS_BOOT_PARAMS  0x80000E00      /* Boot Parameters */
-
-/* Vendor ID's (seems to be same as the PCI vendor ID's) */
-#define VENID_COMPEX           0x11F6
-
-/* Devices based on the ADM5120 */
-#define DEVID_COMPEX_NP27G     0x0078
-#define DEVID_COMPEX_NP28G     0x044C
-#define DEVID_COMPEX_NP28GHS   0x044E
-#define DEVID_COMPEX_WP54Gv1C  0x0514
-#define DEVID_COMPEX_WP54G     0x0515
-#define DEVID_COMPEX_WP54AG    0x0546
-#define DEVID_COMPEX_WPP54AG   0x0550
-#define DEVID_COMPEX_WPP54G    0x0555
-
-/* Devices based on the IXP422 */
-#define DEVID_COMPEX_WP18      0x047E
-#define DEVID_COMPEX_NP18A     0x0489
-
-/* Other devices */
-#define DEVID_COMPEX_NP26G8M   0x03E8
-#define DEVID_COMPEX_NP26G16M  0x03E9
-
-struct mylo_fw_header {
-       uint32_t        magic;  /* must be MYLO_MAGIC_FIRMWARE */
-       uint32_t        crc;    /* CRC of the whole firmware */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint16_t        vid;    /* vendor ID */
-       uint16_t        did;    /* device ID */
-       uint16_t        svid;   /* sub vendor ID */
-       uint16_t        sdid;   /* sub device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;   /* FIXME: firmware version high? */
-       uint32_t        fwlo;   /* FIXME: firmware version low? */
-       uint32_t        flags;  /* firmware flags */
-};
-
-#define FW_FLAG_BOARD_PARAMS_WP        0x01 /* board parameters are write protected */
-#define FW_FLAG_BOOT_SECTOR_WE 0x02 /* enable of write boot sectors (below 64K) */
-
-struct mylo_fw_blockdesc {
-       uint32_t        type;   /* block type */
-       uint32_t        addr;   /* relative address to flash start */
-       uint32_t        dlen;   /* size of block data in bytes */
-       uint32_t        blen;   /* total size of block in bytes */
-};
-
-#define FW_DESC_TYPE_UNUSED    0
-#define FW_DESC_TYPE_USED      1
-
-struct mylo_partition {
-       uint16_t        flags;  /* partition flags */
-       uint16_t        type;   /* type of the partition */
-       uint32_t        addr;   /* relative address of the partition from the
-                                  flash start */
-       uint32_t        size;   /* size of the partition in bytes */
-       uint32_t        param;  /* if this is the active partition, the
-                                  MyLoader load code to this address */
-};
-
-#define PARTITION_FLAG_ACTIVE  0x8000 /* this is the active partition,
-                                       * MyLoader loads firmware from here */
-#define PARTITION_FLAG_ISRAM   0x2000 /* FIXME: this is a RAM partition? */
-#define PARTIIION_FLAG_RAMLOAD 0x1000 /* FIXME: load this partition into the RAM? */
-#define PARTITION_FLAG_PRELOAD 0x0800 /* the partition data preloaded to RAM
-                                       * before decompression */
-#define PARTITION_FLAG_HAVEHDR  0x0002 /* the partition data have a header */
-
-#define PARTITION_TYPE_FREE    0
-#define PARTITION_TYPE_USED    1
-
-#define MYLO_MAX_PARTITIONS    8       /* maximum number of partitions in the
-                                          partition table */
-
-struct mylo_partition_table {
-       uint32_t        magic;  /* must be MYLO_MAGIC_PARTITIONS */
-       uint32_t        res0;   /* unknown/unused */
-       uint32_t        res1;   /* unknown/unused */
-       uint32_t        res2;   /* unknown/unused */
-       struct mylo_partition partitions[MYLO_MAX_PARTITIONS];
-};
-
-struct mylo_partition_header {
-       uint32_t        len;    /* length of the partition data */
-       uint32_t        crc;    /* CRC value of the partition data */
-};
-
-struct mylo_system_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_SYS_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        mylo_ver;
-       uint16_t        vid;    /* Vendor ID */
-       uint16_t        did;    /* Device ID */
-       uint16_t        svid;   /* Sub Vendor ID */
-       uint16_t        sdid;   /* Sub Device ID */
-       uint32_t        rev;    /* device revision */
-       uint32_t        fwhi;
-       uint32_t        fwlo;
-       uint32_t        tftp_addr;
-       uint32_t        prog_start;
-       uint32_t        flash_size;     /* Size of boot FLASH in bytes */
-       uint32_t        dram_size;      /* Size of onboard RAM in bytes */
-};
-
-
-struct mylo_eth_addr {
-       uint8_t mac[6];
-       uint8_t csum[2];
-};
-
-#define MYLO_ETHADDR_COUNT     8       /* maximum number of ethernet address
-                                          in the board parameters */
-
-struct mylo_board_params {
-       uint32_t        magic;  /* must be MYLO_MAGIC_BOARD_PARAMS */
-       uint32_t        res0;
-       uint32_t        res1;
-       uint32_t        res2;
-       struct mylo_eth_addr addr[MYLO_ETHADDR_COUNT];
-};
-
-struct myloader_info {
-       u32     vid;
-       u32     did;
-       u32     svid;
-       u32     sdid;
-};
-
-extern struct myloader_info myloader_info;
-extern int myloader_present(void) __init;
-
-#endif /* _MYLOADER_H_*/
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/routerboot.h
deleted file mode 100644 (file)
index 77d1429..0000000
+++ /dev/null
@@ -1,128 +0,0 @@
-/*
- *  $Id$
- *
- *  Mikrotik's RouterBOOT definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ROUTERBOOT_H
-#define _ROUTERBOOT_H
-
-#define RB_MAC_SIZE            6
-
-struct rb_bios_settings {
-       u32     hs_offs; /* hard settings offset */
-       u32     hs_size; /* hard settings size */
-       u32     fw_offs; /* firmware offset */
-       u32     ss_offs; /* soft settings offset */
-       u32     ss_size; /* soft settings size */
-};
-
-struct rb_hard_settings {
-       char    *name;          /* board name */
-       char    *bios_ver;      /* BIOS version */
-       u32     mem_size;       /* memory size in bytes */
-       u32     mac_count;      /* number of mac addresses */
-       u8      *mac_base;      /* mac address base */
-};
-
-/*
- * Magic numbers
- */
-#define RB_MAGIC_HARD  0x64726148 /* "Hard" */
-#define RB_MAGIC_SOFT  0x74666F53 /* "Soft" */
-#define RB_MAGIC_DAWN  0x6E776144 /* "Dawn" */
-
-#define RB_ID_TERMINATOR       0
-
-/*
- * ID values for Hardware settings
- */
-#define RB_ID_HARD_01          1
-#define RB_ID_HARD_02          2
-#define RB_ID_FLASH_INFO       3
-#define RB_ID_MAC_ADDRESS_PACK 4
-#define RB_ID_BOARD_NAME       5
-#define RB_ID_BIOS_VERSION     6
-#define RB_ID_HARD_07          7
-#define RB_ID_SDRAM_TIMINGS    8
-#define RB_ID_DEVICE_TIMINGS   9
-#define RB_ID_SOFTWARE_ID      10
-#define RB_ID_SERIAL_NUMBER    11
-#define RB_ID_HARD_12          12
-#define RB_ID_MEMORY_SIZE      13
-#define RB_ID_MAC_ADDRESS_COUNT        14
-
-/*
- * ID values for Software settings
- */
-#define RB_ID_UART_SPEED       1
-#define RB_ID_BOOT_DELAY       2
-#define RB_ID_BOOT_DEVICE      3
-#define RB_ID_BOOT_KEY         4
-#define RB_ID_CPU_MODE         5
-#define RB_ID_FW_VERSION       6
-#define RB_ID_SOFT_07          7
-#define RB_ID_SOFT_08          8
-#define RB_ID_BOOT_PROTOCOL    9
-#define RB_ID_SOFT_10          10
-#define RB_ID_SOFT_11          11
-
-/*
- * UART_SPEED values
- */
-#define RB_UART_SPEED_115200   0
-#define RB_UART_SPEED_57600    1
-#define RB_UART_SPEED_38400    2
-#define RB_UART_SPEED_19200    3
-#define RB_UART_SPEED_9600     4
-#define RB_UART_SPEED_4800     5
-#define RB_UART_SPEED_2400     6
-#define RB_UART_SPEED_1200     7
-
-/*
- * BOOT_DELAY values
- */
-#define RB_BOOT_DELAY_0SEC     0
-#define RB_BOOT_DELAY_1SEC     1
-#define RB_BOOT_DELAY_2SEC     2
-
-/*
- * BOOT_DEVICE values
- */
-#define RB_BOOT_DEVICE_ETHER   0
-#define RB_BOOT_DEVICE_NANDETH 1
-#define RB_BOOT_DEVICE_ETHONCE 2
-#define RB_BOOT_DEVICE_NANDONLY        3
-
-/*
- * BOOT_KEY values
- */
-#define RB_BOOT_KEY_ANY                0
-#define RB_BOOT_KEY_DEL                1
-
-/*
- * CPU_MODE values
- */
-#define RB_CPU_MODE_POWERSAVE  0
-#define RB_CPU_MODE_REGULAR    1
-
-/*
- * BOOT_PROTOCOL values
- */
-#define RB_BOOT_PROTOCOL_BOOTP 0
-#define RB_BOOT_PROTOCOL_DHCP  1
-
-extern int routerboot_present(void) __init;
-extern char *routerboot_get_boardname(void);
-
-extern struct rb_hard_settings rb_hs;
-
-#endif /* _ROUTERBOOT_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/prom/zynos.h
deleted file mode 100644 (file)
index 9ebf332..0000000
+++ /dev/null
@@ -1,89 +0,0 @@
-/*
- *  $Id$
- *
- *  ZyNOS (ZyXEL's Networking OS) definitions
- *
- *  Copyright (C) 2007 OpenWrt.org
- *  Copyright (C) 2007 Gabor Juhos <juhosg at openwrt.org>
- *
- *  This program is free software; you can redistribute it and/or modify it
- *  under the terms of the GNU General Public License version 2 as published
- *  by the Free Software Foundation.
- *
- */
-
-#ifndef _ZYNOS_H
-#define _ZYNOS_H
-
-#define ZYNOS_NAME_LEN         32
-#define ZYNOS_FEAT_BYTES       22
-#define ZYNOS_MAC_LEN          6
-
-struct zynos_board_info {
-       unsigned char   vendor[ZYNOS_NAME_LEN];
-       unsigned char   product[ZYNOS_NAME_LEN];
-       u32             bootext_addr;
-       u32             res0;
-       u16             board_id;
-       u8              res1[6];
-       u8              feat_other[ZYNOS_FEAT_BYTES];
-       u8              feat_main;
-       u8              res2;
-       u8              mac[ZYNOS_MAC_LEN];
-       u8              country;
-       u8              dbgflag;
-} __attribute__ ((packed));
-
-/*
- * Vendor IDs
- */
-#define ZYNOS_VENDOR_ID_ZYXEL  0
-#define ZYNOS_VENDOR_ID_NETGEAR        1
-#define ZYNOS_VENDOR_ID_DLINK  2
-#define ZYNOS_VENDOR_ID_OTHER  3
-#define ZYNOS_VENDOR_ID_LUCENT 4
-
-/*
- * Vendor names
- */
-#define ZYNOS_VENDOR_DLINK     "D-Link"
-#define ZYNOS_VENDOR_LUCENT    "LUCENT"
-#define ZYNOS_VENDOR_NETGEAR   "NetGear"
-#define ZYNOS_VENDOR_ZYXEL     "ZyXEL"
-
-/*
- * Board IDs (big-endian)
- */
-#define ZYNOS_BOARD_ES2108     0x00F2  /* Ethernet Switch 2108 */
-#define ZYNOS_BOARD_ES2108F    0x01AF  /* Ethernet Switch 2108-F */
-#define ZYNOS_BOARD_ES2108G    0x00F3  /* Ethernet Switch 2108-G */
-#define ZYNOS_BOARD_ES2108LC   0x00FC  /* Ethernet Switch 2108-LC */
-#define ZYNOS_BOARD_ES2108PWR  0x00F4  /* Ethernet Switch 2108PWR */
-#define ZYNOS_BOARD_HS100      0x9FF1  /* HomeSafe 100/100W */
-#define ZYNOS_BOARD_P334       0x9FF5  /* Prestige 334 */
-#define ZYNOS_BOARD_P334U      0x9FDD  /* Prestige 334U */
-#define ZYNOS_BOARD_P334W      0x9FF3  /* Prestige 334W */
-#define ZYNOS_BOARD_P334WH     0x00E0  /* Prestige 334WH */
-#define ZYNOS_BOARD_P334WHD    0x00E1  /* Prestige 334WHD */
-#define ZYNOS_BOARD_P334WT     0x9FEF  /* Prestige 334WT */
-#define ZYNOS_BOARD_P334WT_ALT 0x9F02  /* Prestige 334WT alternative */
-#define ZYNOS_BOARD_P335       0x9FED  /* Prestige 335/335WT */
-#define ZYNOS_BOARD_P335PLUS   0x0025  /* Prestige 335Plus */
-#define ZYNOS_BOARD_P335U      0x9FDC  /* Prestige 335U */
-
-/*
- * Some magic numbers (big-endian)
- */
-#define ZYNOS_MAGIC_DBGAREA1   0x48646267      /* "Hdbg" */
-#define ZYNOS_MAGIC_DBGAREA2   0x61726561      /* "area" */
-
-struct bootbase_info {
-       u16             vendor_id;
-       u16             board_id;
-       u8              mac[6];
-};
-
-extern struct bootbase_info bootbase_info;
-extern int bootbase_present(void) __init;
-
-#endif /* _ZYNOS_H */
diff --git a/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h b/target/linux/adm5120/files/include/asm-mips/mach-adm5120/war.h
deleted file mode 100644 (file)
index 87c35f3..0000000
+++ /dev/null
@@ -1,25 +0,0 @@
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License.  See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_ADM5120_WAR_H
-#define __ASM_MIPS_MACH_ADM5120_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR    0
-#define R4600_V1_HIT_CACHEOP_WAR       0
-#define R4600_V2_HIT_CACHEOP_WAR       0
-#define R5432_CP0_INTERRUPT_WAR                0
-#define BCM1250_M3_WAR                 0
-#define SIBYTE_1956_WAR                        0
-#define MIPS4K_ICACHE_REFILL_WAR       0
-#define MIPS_CACHE_SYNC_WAR            0
-#define TX49XX_ICACHE_INDEX_INV_WAR    0
-#define RM9000_CDEX_SMP_WAR            0
-#define ICACHE_REFILLS_WORKAROUND_WAR  0
-#define R10000_LLSC_WAR                        0
-#define MIPS34K_MISSED_ITLB_WAR                0
-
-#endif /* __ASM_MIPS_MACH_ADM5120_WAR_H */
diff --git a/target/linux/adm5120/patches/001-adm5120.patch b/target/linux/adm5120/patches/001-adm5120.patch
deleted file mode 100644 (file)
index 290dbd6..0000000
+++ /dev/null
@@ -1,112 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -18,6 +18,21 @@
-       prompt "System type"
-       default SGI_IP22
-+config MIPS_ADM5120
-+      bool "ADM5120 SoC based machines"
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select DMA_NONCOHERENT
-+      select HW_HAS_PCI
-+      select IRQ_CPU
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select GENERIC_GPIO
-+      select SWAP_IO_SPACE if CPU_BIG_ENDIAN
-+
- config MACH_ALCHEMY
-       bool "Alchemy processor based machines"
-@@ -683,6 +698,7 @@
- endchoice
-+source "arch/mips/adm5120/Kconfig"
- source "arch/mips/au1000/Kconfig"
- source "arch/mips/basler/excite/Kconfig"
- source "arch/mips/jazz/Kconfig"
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -174,6 +174,16 @@
- load-$(CONFIG_MACH_JAZZ)      += 0xffffffff80080000
- #
-+# ADMtek 5120
-+#
-+
-+libs-$(CONFIG_MIPS_ADM5120)   += arch/mips/adm5120/prom/
-+core-$(CONFIG_MIPS_ADM5120)   += arch/mips/adm5120/
-+core-$(CONFIG_MIPS_ADM5120)   += arch/mips/adm5120/boards/
-+cflags-$(CONFIG_MIPS_ADM5120) += -Iinclude/asm-mips/mach-adm5120
-+load-$(CONFIG_MIPS_ADM5120)   += 0xffffffff80001000
-+
-+#
- # Common Alchemy Au1x00 stuff
- #
- core-$(CONFIG_SOC_AU1X00)     += arch/mips/au1000/common/
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -94,6 +94,58 @@
- #define MACH_MSP7120_FPGA       5     /* PMC-Sierra MSP7120 Emulation */
- #define MACH_MSP_OTHER        255     /* PMC-Sierra unknown board type */
-+/*
-+ * Valid machtype for group ADMtek ADM5120
-+ */
-+#define MACH_ADM5120_GENERIC  0       /* Generic board */
-+#define MACH_ADM5120_WP54G_WRT        1       /* Compex WP54G-WRT */
-+#define MACH_ADM5120_WP54G    2       /* Compex WP54G */
-+#define MACH_ADM5120_WP54AG   3       /* Compex WP54AG */
-+#define MACH_ADM5120_WPP54G   4       /* Compex WPP54G */
-+#define MACH_ADM5120_WPP54AG  5       /* Compex WPP54AG */
-+#define MACH_ADM5120_NP28G    6       /* Compex NP28G */
-+#define MACH_ADM5120_NP28GHS  7       /* Compex NP28G HotSpot */
-+#define MACH_ADM5120_NP27G    8       /* Compex NP27G */
-+#define MACH_ADM5120_WP54Gv1C 9       /* Compex WP54G version 1C */
-+#define MACH_ADM5120_RB_111   10      /* Mikrotik RouterBOARD 111 */
-+#define MACH_ADM5120_RB_112   11      /* Mikrotik RouterBOARD 112 */
-+#define MACH_ADM5120_RB_133   12      /* Mikrotik RouterBOARD 133 */
-+#define MACH_ADM5120_RB_133C  13      /* Mikrotik RouterBOARD 133c */
-+#define MACH_ADM5120_RB_150   14      /* Mikrotik RouterBOARD 150 */
-+#define MACH_ADM5120_RB_153   15      /* Mikrotik RouterBOARD 153 */
-+#define MACH_ADM5120_HS100    16      /* ZyXEL HomeSafe 100/100W */
-+#define MACH_ADM5120_P334     17      /* ZyXEL Prestige 334 */
-+#define MACH_ADM5120_P334U    18      /* ZyXEL Prestige 334U */
-+#define MACH_ADM5120_P334W    19      /* ZyXEL Prestige 334W */
-+#define MACH_ADM5120_P334WH   20      /* ZyXEL Prestige 334WH */
-+#define MACH_ADM5120_P334WHD  21      /* ZyXEL Prestige 334WHD */
-+#define MACH_ADM5120_P334WT   22      /* ZyXEL Prestige 334WT */
-+#define MACH_ADM5120_P335     23      /* ZyXEL Prestige 335/335WT */
-+#define MACH_ADM5120_P335PLUS 24      /* ZyXEL Prestige 335Plus */
-+#define MACH_ADM5120_P335U    25      /* ZyXEL Prestige 335U */
-+#define MACH_ADM5120_ES2108   26      /* ZyXEL Ethernet Switch 2108 */
-+#define MACH_ADM5120_ES2108F  27      /* ZyXEL Ethernet Switch 2108-F */
-+#define MACH_ADM5120_ES2108G  28      /* ZyXEL Ethernet Switch 2108-G */
-+#define MACH_ADM5120_ES2108LC 29      /* ZyXEL Ethernet Switch 2108-LC */
-+#define MACH_ADM5120_ES2108PWR        30      /* ZyXEL Ethernet Switch 2108-PWR */
-+#define MACH_ADM5120_ES2024A  31      /* ZyXEL Ethernet Switch 2024A */
-+#define MACH_ADM5120_ES2024PWR        32      /* ZyXEL Ethernet Switch 2024PWR */
-+#define MACH_ADM5120_CAS630   33      /* Cellvision CAS-630/630W */
-+#define MACH_ADM5120_CAS670   34      /* Cellvision CAS-670/670W */
-+#define MACH_ADM5120_CAS700   36      /* Cellvision CAS-700/700W */
-+#define MACH_ADM5120_CAS771   37      /* Cellvision CAS-771/771W */
-+#define MACH_ADM5120_CAS790   38      /* Cellvision CAS-790 */
-+#define MACH_ADM5120_CAS861   39      /* Cellvision CAS-861/861W */
-+#define MACH_ADM5120_NFS101U  40      /* Cellvision NFS-101U/101WU */
-+#define MACH_ADM5120_NFS202U  41      /* Cellvision NFS-202U/202WU */
-+#define MACH_ADM5120_EASY5120PATA 42  /* Infineon EASY 5120P-ATA */
-+#define MACH_ADM5120_EASY5120RT 43    /* Infineon EASY 5120-RT */
-+#define MACH_ADM5120_EASY5120WVOIP 44 /* Infineon EASY 5120-WVoIP */
-+#define MACH_ADM5120_EASY83000        45      /* Infineon EASY-83000 */
-+#define MACH_ADM5120_BR6104K  46      /* Edimax BR-6104K/BR-6104KP */
-+#define MACH_ADM5120_RB_192   47      /* Mikrotik RouterBOARD 192 */
-+#define MACH_ADM5120_BR61x4WG 48      /* Edimax BR-6104Wg/BR-6114WG */
-+
- #define CL_SIZE                       COMMAND_LINE_SIZE
- extern char *system_type;
diff --git a/target/linux/adm5120/patches/002-adm5120_flash.patch b/target/linux/adm5120/patches/002-adm5120_flash.patch
deleted file mode 100644 (file)
index 1439523..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/mtd/maps/Kconfig
-+++ b/drivers/mtd/maps/Kconfig
-@@ -590,5 +590,9 @@
-         This selection automatically selects the map_ram driver.
-+config MTD_ADM5120
-+      tristate "Map driver for ADM5120 based boards"
-+      depends on MIPS_ADM5120
-+
- endmenu
---- a/drivers/mtd/maps/Makefile
-+++ b/drivers/mtd/maps/Makefile
-@@ -44,6 +44,7 @@
- obj-$(CONFIG_MTD_SOLUTIONENGINE)+= solutionengine.o
- obj-$(CONFIG_MTD_PCI)         += pci.o
- obj-$(CONFIG_MTD_ALCHEMY)       += alchemy-flash.o
-+obj-$(CONFIG_MTD_ADM5120)             += adm5120-flash.o
- obj-$(CONFIG_MTD_AUTCPU12)    += autcpu12-nvram.o
- obj-$(CONFIG_MTD_EDB7312)     += edb7312.o
- obj-$(CONFIG_MTD_IMPA7)               += impa7.o
diff --git a/target/linux/adm5120/patches/003-adm5120_switch.patch b/target/linux/adm5120/patches/003-adm5120_switch.patch
deleted file mode 100644 (file)
index 2071811..0000000
+++ /dev/null
@@ -1,23 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -606,6 +606,10 @@
-         If you have an Alchemy Semi AU1X00 based system
-         say Y.  Otherwise, say N.
-+config MIPS_ADM5120_ENET
-+      tristate "MIPS ADM5120 Ethernet switch support"
-+      depends on MIPS_ADM5120
-+
- config SGI_IOC3_ETH
-       bool "SGI IOC3 Ethernet"
-       depends on PCI && SGI_IP27
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -187,6 +187,7 @@
- # This is also a 82596 and should probably be merged
- obj-$(CONFIG_LP486E) += lp486e.o
-+obj-$(CONFIG_MIPS_ADM5120_ENET) += adm5120sw.o
- obj-$(CONFIG_ETH16I) += eth16i.o
- obj-$(CONFIG_ZORRO8390) += zorro8390.o
- obj-$(CONFIG_HPLANCE) += hplance.o 7990.o
diff --git a/target/linux/adm5120/patches/005-adm5120_usb.patch b/target/linux/adm5120/patches/005-adm5120_usb.patch
deleted file mode 100644 (file)
index 4ab31dd..0000000
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -260,3 +260,6 @@
-         To compile this driver as a module, choose M here: the
-         module will be called r8a66597-hcd.
-+config USB_ADM5120_HCD
-+      tristate "ADM5120 HCD support (EXPERIMENTAL)"
-+      depends on USB && MIPS_ADM5120 && EXPERIMENTAL
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -8,6 +8,7 @@
- obj-$(CONFIG_PCI)             += pci-quirks.o
-+obj-$(CONFIG_USB_ADM5120_HCD) += adm5120-hcd.o
- obj-$(CONFIG_USB_EHCI_HCD)    += ehci-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o
- obj-$(CONFIG_USB_OHCI_HCD)    += ohci-hcd.o
---- a/drivers/usb/Makefile
-+++ b/drivers/usb/Makefile
-@@ -16,6 +16,7 @@
- obj-$(CONFIG_USB_SL811_HCD)   += host/
- obj-$(CONFIG_USB_U132_HCD)    += host/
- obj-$(CONFIG_USB_R8A66597_HCD)        += host/
-+obj-$(CONFIG_USB_ADM5120_HCD)         += host/
- obj-$(CONFIG_USB_ACM)         += class/
- obj-$(CONFIG_USB_PRINTER)     += class/
diff --git a/target/linux/adm5120/patches/006-adm5120_leds.patch b/target/linux/adm5120/patches/006-adm5120_leds.patch
deleted file mode 100644 (file)
index ac108e5..0000000
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -25,6 +25,21 @@
-         This option enables support for LEDs driven using outputs
-         of the dedicated PWM controller found on newer Atmel SOCs.
-+config LEDS_ADM5120
-+      tristate "LED Support for ADM5120 GPIO LEDs"
-+      depends on LEDS_GPIO && MIPS_ADM5120
-+      help
-+        This option enables support for LEDs connected to GPIO lines
-+        on ADM5120 SoC based platforms.
-+
-+config LEDS_ADM5120_EXPERIMENTAL
-+      bool "Enable ADM5120 LEDs experimental code"
-+      depends on LEDS_ADM5120
-+
-+config LEDS_ADM5120_DIAG
-+      bool "Enable ADM5120 LEDs diagnostic mode"
-+      depends on LEDS_ADM5120
-+
- config LEDS_CORGI
-       tristate "LED Support for the Sharp SL-C7x0 series"
-       depends on LEDS_CLASS && PXA_SHARP_C7xx
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -5,6 +5,7 @@
- obj-$(CONFIG_LEDS_TRIGGERS)           += led-triggers.o
- # LED Platform Drivers
-+obj-$(CONFIG_LEDS_ADM5120)            += leds-adm5120.o
- obj-$(CONFIG_LEDS_ATMEL_PWM)          += leds-atmel-pwm.o
- obj-$(CONFIG_LEDS_CORGI)              += leds-corgi.o
- obj-$(CONFIG_LEDS_LOCOMO)             += leds-locomo.o
diff --git a/target/linux/adm5120/patches/007-adm5120_pci.patch b/target/linux/adm5120/patches/007-adm5120_pci.patch
deleted file mode 100644 (file)
index 75d3be6..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@
- obj-$(CONFIG_VICTOR_MPC30X)   += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA)    += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC)         += fixup-wrppmc.o
-+obj-$(CONFIG_PCI_ADM5120)     += pci-adm5120.o
---- a/include/linux/pci_ids.h
-+++ b/include/linux/pci_ids.h
-@@ -1705,6 +1705,9 @@
- #define PCI_VENDOR_ID_ESDGMBH         0x12fe
- #define PCI_DEVICE_ID_ESDGMBH_CPCIASIO4 0x0111
-+#define PCI_VENDOR_ID_ADMTEK          0x1317
-+#define PCI_DEVICE_ID_ADMTEK_ADM5120  0x5120
-+
- #define PCI_VENDOR_ID_SIIG            0x131f
- #define PCI_SUBVENDOR_ID_SIIG         0x131f
- #define PCI_DEVICE_ID_SIIG_1S_10x_550 0x1000
diff --git a/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch b/target/linux/adm5120/patches/009-adm5120_leds_switch_trigger.patch
deleted file mode 100644 (file)
index 18280ed..0000000
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -213,4 +213,12 @@
-         This allows LEDs to be initialised in the ON state.
-         If unsure, say Y.
-+config LEDS_TRIGGER_ADM5120_SWITCH
-+      tristate "LED ADM5120 Switch Port Status Trigger"
-+      depends on LEDS_TRIGGERS && LEDS_ADM5120
-+      help
-+        This allows LEDs to be controlled by the port states of
-+        the ADM5120 built-in Ethernet Switch
-+        If unsure, say N.
-+
- endif # NEW_LEDS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -30,3 +30,4 @@
- obj-$(CONFIG_LEDS_TRIGGER_HEARTBEAT)  += ledtrig-heartbeat.o
- obj-$(CONFIG_LEDS_TRIGGER_MORSE)      += ledtrig-morse.o
- obj-$(CONFIG_LEDS_TRIGGER_DEFAULT_ON) += ledtrig-default-on.o
-+obj-$(CONFIG_LEDS_TRIGGER_ADM5120_SWITCH) += ledtrig-adm5120-switch.o
diff --git a/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch b/target/linux/adm5120/patches/100-mtd_myloder_partition_parser.patch
deleted file mode 100644 (file)
index f518893..0000000
+++ /dev/null
@@ -1,35 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -168,6 +168,22 @@
-         the partition map from the children of the flash node,
-         as described in Documentation/powerpc/booting-without-of.txt.
-+config MTD_MYLOADER_PARTS
-+      tristate "MyLoader partition parsing"
-+      depends on MIPS_ADM5120 && MTD_PARTITIONS
-+      ---help---
-+        MyLoader is a bootloader which allows the user to define partitions
-+        in flash devices, by putting a table in the second erase block
-+        on the device, similar to a partition table. This table gives the 
-+        offsets and lengths of the user defined partitions.
-+
-+        If you need code which can detect and parse these tables, and
-+        register MTD 'partitions' corresponding to each image detected,
-+        enable this option.
-+
-+        You will still need the parsing functions to be called by the driver
-+        for your particular device. It won't happen automatically.
-+
- comment "User Modules And Translation Layers"
- config MTD_CHAR
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -12,6 +12,7 @@
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
- obj-$(CONFIG_MTD_OF_PARTS)      += ofpart.o
-+obj-$(CONFIG_MTD_MYLOADER_PARTS) += myloader.o
- # 'Users' - code which presents functionality to userspace.
- obj-$(CONFIG_MTD_CHAR)                += mtdchar.o
diff --git a/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch b/target/linux/adm5120/patches/101-cfi_fixup_macronix_bootloc.patch
deleted file mode 100644 (file)
index 9179088..0000000
+++ /dev/null
@@ -1,91 +0,0 @@
---- a/drivers/mtd/chips/cfi_cmdset_0002.c
-+++ b/drivers/mtd/chips/cfi_cmdset_0002.c
-@@ -47,12 +47,19 @@
- #define MANUFACTURER_AMD      0x0001
- #define MANUFACTURER_ATMEL    0x001F
- #define MANUFACTURER_SST      0x00BF
-+#define MANUFACTURER_MACRONIX 0x00C2
- #define SST49LF004B           0x0060
- #define SST49LF040B           0x0050
- #define SST49LF008A           0x005a
- #define AT49BV6416            0x00d6
- #define MANUFACTURER_SAMSUNG  0x00ec
-+/* Macronix */
-+#define MX29LV160B    0x2249  /* MX29LV160 Bottom-boot chip */
-+#define MX29LV160T    0x22C4  /* MX29LV160 Top-boot chip */
-+#define MX29LV320B    0x22A8  /* MX29LV320 Bottom-boot chip */
-+#define MX29LV320T    0x22A7  /* MX29LV320 Top-boot chip */
-+
- static int cfi_amdstd_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *);
- static int cfi_amdstd_write_words(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
- static int cfi_amdstd_write_buffers(struct mtd_info *, loff_t, size_t, size_t *, const u_char *);
-@@ -221,6 +228,41 @@
-       mtd->flags |= MTD_POWERUP_LOCK;
- }
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+/*
-+ * Some Macronix chips has no/bad bootblock information in the CFI table
-+ */
-+static void fixup_macronix_bootloc(struct mtd_info *mtd, void* param)
-+{
-+      struct map_info *map = mtd->priv;
-+      struct cfi_private *cfi = map->fldrv_priv;
-+      struct cfi_pri_amdstd *extp = cfi->cmdset_priv;
-+      __u8 t;
-+
-+      switch (cfi->id) {
-+      /* TODO: put affected chip ids here */
-+      case MX29LV160B:
-+      case MX29LV320B:
-+              t = 2;  /* Bottom boot */
-+              break;
-+      case MX29LV160T:
-+      case MX29LV320T:
-+              t = 3;  /* Top boot */
-+              break;
-+      default:
-+              return;
-+      }
-+
-+      if (extp->TopBottom == t)
-+              /* boot location detected by the CFI layer is correct */
-+              return;
-+
-+      extp->TopBottom = t;
-+      printk("%s: Macronix chip detected, id:0x%04X, boot location forced "
-+              "to %s\n", map->name, cfi->id, (t == 2) ? "bottom" : "top");
-+}
-+#endif /* CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC */
-+
- static struct cfi_fixup cfi_fixup_table[] = {
-       { CFI_MFR_ATMEL, CFI_ID_ANY, fixup_convert_atmel_pri, NULL },
- #ifdef AMD_BOOTLOC_BUG
-@@ -252,6 +294,9 @@
-        */
-       { CFI_MFR_ANY, CFI_ID_ANY, fixup_use_erase_chip, NULL },
-       { CFI_MFR_ATMEL, AT49BV6416, fixup_use_atmel_lock, NULL },
-+#ifdef CONFIG_MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      { MANUFACTURER_MACRONIX, CFI_ID_ANY, fixup_macronix_bootloc, NULL, },
-+#endif
-       { 0, 0, NULL, NULL }
- };
---- a/drivers/mtd/chips/Kconfig
-+++ b/drivers/mtd/chips/Kconfig
-@@ -196,6 +196,14 @@
-         provides support for one of those command sets, used on chips
-         including the AMD Am29LV320.
-+config MTD_CFI_FIXUP_MACRONIX_BOOTLOC
-+      bool "Fix boot-block location for Macronix flash chips"
-+      depends on MTD_CFI_AMDSTD
-+      help
-+        Some Macronix flash chips have no/wrong boot-block location in the
-+        CFI table, and the driver may detect the type incorrectly. Select
-+        this if your board has such chip.
-+
- config MTD_CFI_STAA
-       tristate "Support for ST (Advanced Architecture) flash chips"
-       depends on MTD_GEN_PROBE
diff --git a/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch b/target/linux/adm5120/patches/102-jedec_pmc_39lvxxx_chips.patch
deleted file mode 100644 (file)
index 7f352f6..0000000
+++ /dev/null
@@ -1,68 +0,0 @@
---- a/drivers/mtd/chips/jedec_probe.c
-+++ b/drivers/mtd/chips/jedec_probe.c
-@@ -121,6 +121,10 @@
- #define UPD29F064115  0x221C
- /* PMC */
-+#define PM39LV512     0x001B
-+#define PM39LV010     0x001C
-+#define PM39LV020     0x003D
-+#define PM39LV040     0x003E
- #define PM49FL002     0x006D
- #define PM49FL004     0x006E
- #define PM49FL008     0x006A
-@@ -1170,6 +1174,54 @@
-                       ERASEINFO(0x02000,2),
-                       ERASEINFO(0x04000,1),
-               }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV512,
-+              .name           = "PMC Pm39LV512",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_64KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,16),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV010,
-+              .name           = "PMC Pm39LV010",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_128KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,32),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV020,
-+              .name           = "PMC Pm39LV020",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_256KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,64),
-+              }
-+        }, {
-+              .mfr_id         = MANUFACTURER_PMC,
-+              .dev_id         = PM39LV040,
-+              .name           = "PMC Pm39LV040",
-+              .devtypes       = CFI_DEVICETYPE_X8,
-+              .uaddr          = MTD_UADDR_0x0555_0x02AA,
-+              .dev_size       = SIZE_512KiB,
-+              .cmd_set        = P_ID_AMD_STD,
-+              .nr_regions     = 1,
-+              .regions        = {
-+                      ERASEINFO(0x01000,128),
-+              }
-       }, {
-               .mfr_id         = MANUFACTURER_PMC,
-               .dev_id         = PM49FL002,
diff --git a/target/linux/adm5120/patches/103-mtd_trxsplit.patch b/target/linux/adm5120/patches/103-mtd_trxsplit.patch
deleted file mode 100644 (file)
index 267293a..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -57,6 +57,11 @@
-       depends on MTD_PARTITIONS
-       default y
-+config MTD_TRXSPLIT
-+      bool "Automatically find and split TRX partitions"
-+      depends on MTD_PARTITIONS
-+      default n
-+
- config MTD_REDBOOT_PARTS
-       tristate "RedBoot partition table parsing"
-       depends on MTD_PARTITIONS
---- a/drivers/mtd/Makefile
-+++ b/drivers/mtd/Makefile
-@@ -8,6 +8,7 @@
- mtd-$(CONFIG_MTD_PARTITIONS)  += mtdpart.o
- obj-$(CONFIG_MTD_CONCAT)      += mtdconcat.o
-+obj-$(CONFIG_MTD_TRXSPLIT)    += trxsplit.o
- obj-$(CONFIG_MTD_REDBOOT_PARTS) += redboot.o
- obj-$(CONFIG_MTD_CMDLINE_PARTS) += cmdlinepart.o
- obj-$(CONFIG_MTD_AFS_PARTS)   += afs.o
diff --git a/target/linux/adm5120/patches/120-rb153_cf_driver.patch b/target/linux/adm5120/patches/120-rb153_cf_driver.patch
deleted file mode 100644 (file)
index 6f371e3..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -71,6 +71,7 @@
- obj-$(CONFIG_PATA_PLATFORM)   += pata_platform.o
- obj-$(CONFIG_PATA_OF_PLATFORM)        += pata_of_platform.o
- obj-$(CONFIG_PATA_ICSIDE)     += pata_icside.o
-+obj-$(CONFIG_PATA_RB153_CF)   += pata_rb153_cf.o
- # Should be last but two libata driver
- obj-$(CONFIG_PATA_ACPI)               += pata_acpi.o
- # Should be last but one libata driver
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -679,4 +679,13 @@
-         If unsure, say N.
-+config PATA_RB153_CF
-+      tristate "RouterBOARD 153 Compact Flash support"
-+      depends on MIPS_ADM5120
-+      help
-+        This option enables support for a Compact Flash connected on
-+        the RouterBOARD 153.
-+
-+        If unsure, say N.
-+
- endif # ATA
diff --git a/target/linux/adm5120/patches/140-cmdline_hack.patch b/target/linux/adm5120/patches/140-cmdline_hack.patch
deleted file mode 100644 (file)
index 1ced3f6..0000000
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -126,7 +126,12 @@
-       /*
-        * Reserved space for exception handlers.
-        * Necessary for machines which link their kernels at KSEG0.
-+       * Use as temporary storage for the kernel command line, so that it
-+       * can be updated easily without having to relink the kernel.
-        */
-+
-+EXPORT(_image_cmdline)
-+      .ascii "CMDLINE:"
-       .fill   0x400
- #endif
diff --git a/target/linux/adm5120/patches/200-amba_pl010_hacks.patch b/target/linux/adm5120/patches/200-amba_pl010_hacks.patch
deleted file mode 100644 (file)
index 39c1dea..0000000
+++ /dev/null
@@ -1,378 +0,0 @@
---- a/drivers/serial/amba-pl010.c
-+++ b/drivers/serial/amba-pl010.c
-@@ -52,11 +52,10 @@
- #include <asm/io.h>
--#define UART_NR               8
--
- #define SERIAL_AMBA_MAJOR     204
- #define SERIAL_AMBA_MINOR     16
--#define SERIAL_AMBA_NR                UART_NR
-+#define SERIAL_AMBA_NR                CONFIG_SERIAL_AMBA_PL010_NUMPORTS
-+#define SERIAL_AMBA_NAME      CONFIG_SERIAL_AMBA_PL010_PORTNAME
- #define AMBA_ISR_PASS_LIMIT   256
-@@ -82,9 +81,9 @@
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_start_tx(struct uart_port *port)
-@@ -92,9 +91,9 @@
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_TIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_stop_rx(struct uart_port *port)
-@@ -102,9 +101,9 @@
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr &= ~(UART010_CR_RIE | UART010_CR_RTIE);
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_enable_ms(struct uart_port *port)
-@@ -112,9 +111,9 @@
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
-       unsigned int cr;
--      cr = readb(uap->port.membase + UART010_CR);
-+      cr = __raw_readl(uap->port.membase + UART010_CR);
-       cr |= UART010_CR_MSIE;
--      writel(cr, uap->port.membase + UART010_CR);
-+      __raw_writel(cr, uap->port.membase + UART010_CR);
- }
- static void pl010_rx_chars(struct uart_amba_port *uap)
-@@ -122,9 +121,9 @@
-       struct tty_struct *tty = uap->port.info->tty;
-       unsigned int status, ch, flag, rsr, max_count = 256;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       while (UART_RX_DATA(status) && max_count--) {
--              ch = readb(uap->port.membase + UART01x_DR);
-+              ch = __raw_readl(uap->port.membase + UART01x_DR);
-               flag = TTY_NORMAL;
-               uap->port.icount.rx++;
-@@ -133,9 +132,9 @@
-                * Note that the error handling code is
-                * out of the main execution path
-                */
--              rsr = readb(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-+              rsr = __raw_readl(uap->port.membase + UART01x_RSR) | UART_DUMMY_RSR_RX;
-               if (unlikely(rsr & UART01x_RSR_ANY)) {
--                      writel(0, uap->port.membase + UART01x_ECR);
-+                      __raw_writel(0, uap->port.membase + UART01x_ECR);
-                       if (rsr & UART01x_RSR_BE) {
-                               rsr &= ~(UART01x_RSR_FE | UART01x_RSR_PE);
-@@ -165,7 +164,7 @@
-               uart_insert_char(&uap->port, rsr, UART01x_RSR_OE, ch, flag);
-       ignore_char:
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-       }
-       spin_unlock(&uap->port.lock);
-       tty_flip_buffer_push(tty);
-@@ -178,7 +177,7 @@
-       int count;
-       if (uap->port.x_char) {
--              writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-+              __raw_writel(uap->port.x_char, uap->port.membase + UART01x_DR);
-               uap->port.icount.tx++;
-               uap->port.x_char = 0;
-               return;
-@@ -190,7 +189,7 @@
-       count = uap->port.fifosize >> 1;
-       do {
--              writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-+              __raw_writel(xmit->buf[xmit->tail], uap->port.membase + UART01x_DR);
-               xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
-               uap->port.icount.tx++;
-               if (uart_circ_empty(xmit))
-@@ -208,9 +207,9 @@
- {
-       unsigned int status, delta;
--      writel(0, uap->port.membase + UART010_ICR);
-+      __raw_writel(0, uap->port.membase + UART010_ICR);
--      status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       delta = status ^ uap->old_status;
-       uap->old_status = status;
-@@ -238,7 +237,7 @@
-       spin_lock(&uap->port.lock);
--      status = readb(uap->port.membase + UART010_IIR);
-+      status = __raw_readl(uap->port.membase + UART010_IIR);
-       if (status) {
-               do {
-                       if (status & (UART010_IIR_RTIS | UART010_IIR_RIS))
-@@ -251,7 +250,7 @@
-                       if (pass_counter-- == 0)
-                               break;
--                      status = readb(uap->port.membase + UART010_IIR);
-+                      status = __raw_readl(uap->port.membase + UART010_IIR);
-               } while (status & (UART010_IIR_RTIS | UART010_IIR_RIS |
-                                  UART010_IIR_TIS));
-               handled = 1;
-@@ -265,7 +264,7 @@
- static unsigned int pl010_tx_empty(struct uart_port *port)
- {
-       struct uart_amba_port *uap = (struct uart_amba_port *)port;
--      unsigned int status = readb(uap->port.membase + UART01x_FR);
-+      unsigned int status = __raw_readl(uap->port.membase + UART01x_FR);
-       return status & UART01x_FR_BUSY ? 0 : TIOCSER_TEMT;
- }
-@@ -275,7 +274,7 @@
-       unsigned int result = 0;
-       unsigned int status;
--      status = readb(uap->port.membase + UART01x_FR);
-+      status = __raw_readl(uap->port.membase + UART01x_FR);
-       if (status & UART01x_FR_DCD)
-               result |= TIOCM_CAR;
-       if (status & UART01x_FR_DSR)
-@@ -301,12 +300,12 @@
-       unsigned int lcr_h;
-       spin_lock_irqsave(&uap->port.lock, flags);
--      lcr_h = readb(uap->port.membase + UART010_LCRH);
-+      lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-       if (break_state == -1)
-               lcr_h |= UART01x_LCRH_BRK;
-       else
-               lcr_h &= ~UART01x_LCRH_BRK;
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -334,12 +333,12 @@
-       /*
-        * initialise the old status of the modem signals
-        */
--      uap->old_status = readb(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-+      uap->old_status = __raw_readl(uap->port.membase + UART01x_FR) & UART01x_FR_MODEM_ANY;
-       /*
-        * Finally, enable interrupts
-        */
--      writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-+      __raw_writel(UART01x_CR_UARTEN | UART010_CR_RIE | UART010_CR_RTIE,
-              uap->port.membase + UART010_CR);
-       return 0;
-@@ -362,10 +361,10 @@
-       /*
-        * disable all interrupts, disable the port
-        */
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* disable break condition and fifos */
--      writel(readb(uap->port.membase + UART010_LCRH) &
-+      __raw_writel(__raw_readl(uap->port.membase + UART010_LCRH) &
-               ~(UART01x_LCRH_BRK | UART01x_LCRH_FEN),
-              uap->port.membase + UART010_LCRH);
-@@ -387,7 +386,7 @@
-       /*
-        * Ask the core to calculate the divisor for us.
-        */
--      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16); 
-+      baud = uart_get_baud_rate(port, termios, old, 0, uap->port.uartclk/16);
-       quot = uart_get_divisor(port, baud);
-       switch (termios->c_cflag & CSIZE) {
-@@ -450,25 +449,25 @@
-               uap->port.ignore_status_mask |= UART_DUMMY_RSR_RX;
-       /* first, disable everything */
--      old_cr = readb(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR) & ~UART010_CR_MSIE;
-       if (UART_ENABLE_MS(port, termios->c_cflag))
-               old_cr |= UART010_CR_MSIE;
--      writel(0, uap->port.membase + UART010_CR);
-+      __raw_writel(0, uap->port.membase + UART010_CR);
-       /* Set baud rate */
-       quot -= 1;
--      writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
--      writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-+      __raw_writel((quot & 0xf00) >> 8, uap->port.membase + UART010_LCRM);
-+      __raw_writel(quot & 0xff, uap->port.membase + UART010_LCRL);
-       /*
-        * ----------v----------v----------v----------v-----
-        * NOTE: MUST BE WRITTEN AFTER UARTLCR_M & UARTLCR_L
-        * ----------^----------^----------^----------^-----
-        */
--      writel(lcr_h, uap->port.membase + UART010_LCRH);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(lcr_h, uap->port.membase + UART010_LCRH);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       spin_unlock_irqrestore(&uap->port.lock, flags);
- }
-@@ -540,7 +539,7 @@
-       .verify_port    = pl010_verify_port,
- };
--static struct uart_amba_port *amba_ports[UART_NR];
-+static struct uart_amba_port *amba_ports[SERIAL_AMBA_NR];
- #ifdef CONFIG_SERIAL_AMBA_PL010_CONSOLE
-@@ -550,10 +549,10 @@
-       unsigned int status;
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (!UART_TX_READY(status));
--      writel(ch, uap->port.membase + UART01x_DR);
-+      __raw_writel(ch, uap->port.membase + UART01x_DR);
- }
- static void
-@@ -567,8 +566,8 @@
-       /*
-        *      First save the CR then disable the interrupts
-        */
--      old_cr = readb(uap->port.membase + UART010_CR);
--      writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-+      old_cr = __raw_readl(uap->port.membase + UART010_CR);
-+      __raw_writel(UART01x_CR_UARTEN, uap->port.membase + UART010_CR);
-       uart_console_write(&uap->port, s, count, pl010_console_putchar);
-@@ -577,10 +576,10 @@
-        *      and restore the TCR
-        */
-       do {
--              status = readb(uap->port.membase + UART01x_FR);
-+              status = __raw_readl(uap->port.membase + UART01x_FR);
-               barrier();
-       } while (status & UART01x_FR_BUSY);
--      writel(old_cr, uap->port.membase + UART010_CR);
-+      __raw_writel(old_cr, uap->port.membase + UART010_CR);
-       clk_disable(uap->clk);
- }
-@@ -589,9 +588,9 @@
- pl010_console_get_options(struct uart_amba_port *uap, int *baud,
-                            int *parity, int *bits)
- {
--      if (readb(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-+      if (__raw_readl(uap->port.membase + UART010_CR) & UART01x_CR_UARTEN) {
-               unsigned int lcr_h, quot;
--              lcr_h = readb(uap->port.membase + UART010_LCRH);
-+              lcr_h = __raw_readl(uap->port.membase + UART010_LCRH);
-               *parity = 'n';
-               if (lcr_h & UART01x_LCRH_PEN) {
-@@ -606,8 +605,8 @@
-               else
-                       *bits = 8;
--              quot = readb(uap->port.membase + UART010_LCRL) |
--                     readb(uap->port.membase + UART010_LCRM) << 8;
-+              quot = __raw_readl(uap->port.membase + UART010_LCRL) |
-+                     __raw_readl(uap->port.membase + UART010_LCRM) << 8;
-               *baud = uap->port.uartclk / (16 * (quot + 1));
-       }
- }
-@@ -625,7 +624,7 @@
-        * if so, search for the first available port that does have
-        * console support.
-        */
--      if (co->index >= UART_NR)
-+      if (co->index >= SERIAL_AMBA_NR)
-               co->index = 0;
-       uap = amba_ports[co->index];
-       if (!uap)
-@@ -643,7 +642,7 @@
- static struct uart_driver amba_reg;
- static struct console amba_console = {
--      .name           = "ttyAM",
-+      .name           = SERIAL_AMBA_NAME,
-       .write          = pl010_console_write,
-       .device         = uart_console_device,
-       .setup          = pl010_console_setup,
-@@ -659,11 +658,11 @@
- static struct uart_driver amba_reg = {
-       .owner                  = THIS_MODULE,
--      .driver_name            = "ttyAM",
--      .dev_name               = "ttyAM",
-+      .driver_name            = SERIAL_AMBA_NAME,
-+      .dev_name               = SERIAL_AMBA_NAME,
-       .major                  = SERIAL_AMBA_MAJOR,
-       .minor                  = SERIAL_AMBA_MINOR,
--      .nr                     = UART_NR,
-+      .nr                     = SERIAL_AMBA_NR,
-       .cons                   = AMBA_CONSOLE,
- };
---- a/drivers/serial/Kconfig
-+++ b/drivers/serial/Kconfig
-@@ -287,10 +287,25 @@
-       help
-         This selects the ARM(R) AMBA(R) PrimeCell PL010 UART.  If you have
-         an Integrator/AP or Integrator/PP2 platform, or if you have a
--        Cirrus Logic EP93xx CPU, say Y or M here.
-+        Cirrus Logic EP93xx CPU or an Infineon ADM5120 SOC, say Y or M here.
-         If unsure, say N.
-+config SERIAL_AMBA_PL010_NUMPORTS
-+      int "Maximum number of AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "8"
-+      ---help---
-+        Set this to the number of serial ports you want the AMBA PL010 driver
-+        to support.
-+
-+config SERIAL_AMBA_PL010_PORTNAME
-+      string "Name of the AMBA PL010 serial ports"
-+      depends on SERIAL_AMBA_PL010
-+      default "ttyAM"
-+      ---help---
-+        ::: To be written :::
-+
- config SERIAL_AMBA_PL010_CONSOLE
-       bool "Support for console on AMBA serial port"
-       depends on SERIAL_AMBA_PL010=y
diff --git a/target/linux/adm5120/patches/201-amba_bus_hacks.patch b/target/linux/adm5120/patches/201-amba_bus_hacks.patch
deleted file mode 100644 (file)
index 299f216..0000000
+++ /dev/null
@@ -1,13 +0,0 @@
---- a/drivers/amba/bus.c
-+++ b/drivers/amba/bus.c
-@@ -17,6 +17,10 @@
- #include <asm/io.h>
- #include <asm/sizes.h>
-+#ifndef NO_IRQ
-+#define NO_IRQ                (-1)
-+#endif
-+
- #define to_amba_device(d)     container_of(d, struct amba_device, dev)
- #define to_amba_driver(d)     container_of(d, struct amba_driver, drv)
diff --git a/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch b/target/linux/adm5120/patches/202-pci_disable_common_quirks.patch
deleted file mode 100644 (file)
index 2514988..0000000
+++ /dev/null
@@ -1,46 +0,0 @@
---- a/drivers/pci/Kconfig
-+++ b/drivers/pci/Kconfig
-@@ -42,6 +42,12 @@
-         When in doubt, say N.
-+config PCI_DISABLE_COMMON_QUIRKS
-+      bool "PCI disable common quirks"
-+      depends on PCI
-+      help
-+        If you don't know what to do here, say N.
-+
- config HT_IRQ
-       bool "Interrupts on hypertransport devices"
-       default y
---- a/drivers/pci/quirks.c
-+++ b/drivers/pci/quirks.c
-@@ -24,6 +24,7 @@
- #include <linux/kallsyms.h>
- #include "pci.h"
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* The Mellanox Tavor device gives false positive parity errors
-  * Mark this device with a broken_parity_status, to allow
-  * PCI scanning code to "skip" this now blacklisted device.
-@@ -1495,6 +1496,7 @@
-       }
- }
- DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_NCR, PCI_DEVICE_ID_NCR_53C810, fixup_rev1_53c810);
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
- static void pci_do_fixups(struct pci_dev *dev, struct pci_fixup *f, struct pci_fixup *end)
- {
-@@ -1562,6 +1564,7 @@
- }
- EXPORT_SYMBOL(pci_fixup_device);
-+#ifndef CONFIG_PCI_DISABLE_COMMON_QUIRKS
- /* Enable 1k I/O space granularity on the Intel P64H2 */
- static void __devinit quirk_p64h2_1k_io(struct pci_dev *dev)
- {
-@@ -1875,3 +1878,4 @@
-                       quirk_msi_intx_disable_bug);
- #endif /* CONFIG_PCI_MSI */
-+#endif /* !CONFIG_PCI_DISABLE_COMMON_QUIRKS */
diff --git a/target/linux/adm5120/patches/203-gpio_leds_brightness.patch b/target/linux/adm5120/patches/203-gpio_leds_brightness.patch
deleted file mode 100644 (file)
index 06394da..0000000
+++ /dev/null
@@ -1,27 +0,0 @@
---- a/drivers/leds/leds-gpio.c
-+++ b/drivers/leds/leds-gpio.c
-@@ -41,13 +41,17 @@
-               container_of(led_cdev, struct gpio_led_data, cdev);
-       int level;
--      if (value == LED_OFF)
--              level = 0;
--      else
--              level = 1;
--
--      if (led_dat->active_low)
--              level = !level;
-+      switch (value) {
-+      case LED_OFF:
-+              level = led_dat->active_low ? 1 : 0;
-+              break;
-+      case LED_FULL:
-+              level = led_dat->active_low ? 0 : 1;
-+              break;
-+      default:
-+              level = value;
-+              break;
-+      }
-       /* Setting GPIOs with I2C/etc requires a task context, and we don't
-        * seem to have a reliable way to know if we're already in one; so
diff --git a/target/linux/adm5120/patches/310-adm5120_wdt.patch b/target/linux/adm5120/patches/310-adm5120_wdt.patch
deleted file mode 100644 (file)
index 78eb628..0000000
+++ /dev/null
@@ -1,31 +0,0 @@
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -619,6 +619,18 @@
- # MIPS Architecture
-+config ADM5120_WDT
-+      tristate "Infineon ADM5120 SoC hardware watchdog"
-+      depends on WATCHDOG && MIPS_ADM5120
-+      help
-+        This is a driver for hardware watchdog integrated in Infineon
-+        ADM5120 SoC. This watchdog simply watches your kernel to make sure
-+        it doesn't freeze, and if it does, it reboots your computer after a
-+        certain amount of time.
-+
-+        To compile this driver as a module, choose M here: the module will be
-+        called adm5120_wdt.
-+
- config INDYDOG
-       tristate "Indy/I2 Hardware Watchdog"
-       depends on SGI_HAS_INDYDOG
---- a/drivers/watchdog/Makefile
-+++ b/drivers/watchdog/Makefile
-@@ -90,6 +90,7 @@
- # M68KNOMMU Architecture
- # MIPS Architecture
-+obj-$(CONFIG_ADM5120_WDT) += adm5120_wdt.o
- obj-$(CONFIG_INDYDOG) += indydog.o
- obj-$(CONFIG_WDT_MTX1)        += mtx-1_wdt.o
- obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o