--- /dev/null
+#
+# Copyright (C) 2007 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+
+ARCH:=mips
+BOARD:=ifxmips
+BOARDNAME:=Infineon Mips
+FEATURES:=squashfs jffs2 broken
+LINUX_VERSION:=2.6.23
+
+include $(INCLUDE_DIR)/target.mk
+
+define Target/Description
+ Build firmware images for Infineon Mips Controllers
+endef
+
+$(eval $(call BuildTarget))
--- /dev/null
+# Copyright (C) 2006 OpenWrt.org
+
+config interface loopback
+ option ifname lo
+ option proto static
+ option ipaddr 127.0.0.1
+ option netmask 255.0.0.0
+
+config interface lan
+ option ifname eth0
+ #option type bridge
+ option proto static
+ option ipaddr 192.168.45.110
+ option netmask 255.255.255.0
--- /dev/null
+CONFIG_32BIT=y
+# CONFIG_64BIT is not set
+# CONFIG_8139TOO is not set
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_ATM is not set
+CONFIG_BASE_SMALL=0
+CONFIG_BITREVERSE=y
+# CONFIG_BT is not set
+CONFIG_CMDLINE="console=ttyS0,9600 rootfstype=squashfs,jffs2 init=/etc/preinit"
+CONFIG_CPU_BIG_ENDIAN=y
+CONFIG_CPU_HAS_LLSC=y
+CONFIG_CPU_HAS_PREFETCH=y
+CONFIG_CPU_HAS_SYNC=y
+# CONFIG_CPU_LITTLE_ENDIAN is not set
+# CONFIG_CPU_LOONGSON2 is not set
+CONFIG_CPU_MIPS32=y
+CONFIG_CPU_MIPS32_R1=y
+# CONFIG_CPU_MIPS32_R2 is not set
+# CONFIG_CPU_MIPS64_R1 is not set
+# CONFIG_CPU_MIPS64_R2 is not set
+CONFIG_CPU_MIPSR1=y
+# CONFIG_CPU_NEVADA is not set
+# CONFIG_CPU_R10000 is not set
+# CONFIG_CPU_R3000 is not set
+# CONFIG_CPU_R4300 is not set
+# CONFIG_CPU_R4X00 is not set
+# CONFIG_CPU_R5000 is not set
+# CONFIG_CPU_R5432 is not set
+# CONFIG_CPU_R6000 is not set
+# CONFIG_CPU_R8000 is not set
+# CONFIG_CPU_RM7000 is not set
+# CONFIG_CPU_RM9000 is not set
+# CONFIG_CPU_SB1 is not set
+CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
+CONFIG_CPU_SUPPORTS_HIGHMEM=y
+# CONFIG_CPU_TX39XX is not set
+# CONFIG_CPU_TX49XX is not set
+# CONFIG_CPU_VR41XX is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_DANUBE=y
+CONFIG_DANUBE_ASC_UART=y
+CONFIG_DANUBE_EEPROM=y
+CONFIG_DANUBE_GPIO=y
+CONFIG_DANUBE_LED=y
+CONFIG_DANUBE_MII0=y
+CONFIG_DANUBE_MII1=y
+CONFIG_DANUBE_SSC=y
+CONFIG_DANUBE_WDT=y
+CONFIG_DEVPORT=y
+# CONFIG_DM9000 is not set
+CONFIG_DMA_NEED_PCI_MAP_STATE=y
+CONFIG_DMA_NONCOHERENT=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_FS_POSIX_ACL=y
+CONFIG_GENERIC_FIND_NEXT_BIT=y
+# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
+CONFIG_HAS_DMA=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAVE_STD_PC_SERIAL_PORT=y
+# CONFIG_HOSTAP is not set
+CONFIG_HW_HAS_PCI=y
+CONFIG_HW_RANDOM=y
+# CONFIG_I2C is not set
+# CONFIG_IDE is not set
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IRQ_CPU=y
+CONFIG_KALLSYMS=y
+# CONFIG_LEMOTE_FULONG is not set
+# CONFIG_MACH_ALCHEMY is not set
+# CONFIG_MACH_DECSTATION is not set
+# CONFIG_MACH_JAZZ is not set
+# CONFIG_MACH_VR41XX is not set
+CONFIG_MIPS=y
+# CONFIG_MIPS_ATLAS is not set
+# CONFIG_MIPS_COBALT is not set
+CONFIG_MIPS_L1_CACHE_SHIFT=5
+# CONFIG_MIPS_MALTA is not set
+CONFIG_MIPS_MT_DISABLED=y
+# CONFIG_MIPS_MT_SMP is not set
+# CONFIG_MIPS_MT_SMTC is not set
+# CONFIG_MIPS_SEAD is not set
+# CONFIG_MIPS_SIM is not set
+CONFIG_MTD=y
+# CONFIG_MTD_ABSENT is not set
+CONFIG_MTD_BLKDEVS=y
+CONFIG_MTD_BLOCK=y
+# CONFIG_MTD_BLOCK2MTD is not set
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_AMDSTD=y
+# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_GEOMETRY=y
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
+CONFIG_MTD_CFI_NOSWAP=y
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=y
+CONFIG_MTD_CHAR=y
+# CONFIG_MTD_CMDLINE_PARTS is not set
+CONFIG_MTD_COMPLEX_MAPPINGS=y
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_DANUBE=y
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_GEN_PROBE=y
+# CONFIG_MTD_JEDECPROBE is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_ONENAND is not set
+# CONFIG_MTD_OTP is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_PCI is not set
+# CONFIG_MTD_PHRAM is not set
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+CONFIG_MTD_PHYSMAP_LEN=0x0
+CONFIG_MTD_PHYSMAP_START=0x0
+# CONFIG_MTD_PLATRAM is not set
+# CONFIG_MTD_PMC551 is not set
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_NATSEMI is not set
+# CONFIG_NE2K_PCI is not set
+# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_NO_IOPORT is not set
+# CONFIG_PAGE_SIZE_16KB is not set
+CONFIG_PAGE_SIZE_4KB=y
+# CONFIG_PAGE_SIZE_64KB is not set
+# CONFIG_PAGE_SIZE_8KB is not set
+# CONFIG_PCIPCWATCHDOG is not set
+# CONFIG_PMC_MSP is not set
+# CONFIG_PMC_YOSEMITE is not set
+# CONFIG_PNX8550_JBS is not set
+# CONFIG_PNX8550_STB810 is not set
+# CONFIG_RTC is not set
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCSI_WAIT_SCAN=m
+# CONFIG_SERIAL_8250 is not set
+CONFIG_SERIAL_DANUBE=y
+# CONFIG_SGI_IP22 is not set
+# CONFIG_SGI_IP27 is not set
+# CONFIG_SGI_IP32 is not set
+# CONFIG_SIBYTE_BIGSUR is not set
+# CONFIG_SIBYTE_CARMEL is not set
+# CONFIG_SIBYTE_CRHINE is not set
+# CONFIG_SIBYTE_CRHONE is not set
+# CONFIG_SIBYTE_LITTLESUR is not set
+# CONFIG_SIBYTE_PTSWARM is not set
+# CONFIG_SIBYTE_RHONE is not set
+# CONFIG_SIBYTE_SENTOSA is not set
+# CONFIG_SIBYTE_SWARM is not set
+# CONFIG_SOFT_WATCHDOG is not set
+# CONFIG_SPARSEMEM_STATIC is not set
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_SYS_HAS_CPU_MIPS32_R1=y
+CONFIG_SYS_HAS_EARLY_PRINTK=y
+CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
+CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
+CONFIG_SYS_SUPPORTS_BIG_ENDIAN=y
+# CONFIG_TC35815 is not set
+# CONFIG_TOSHIBA_JMR3927 is not set
+# CONFIG_TOSHIBA_RBTX4927 is not set
+# CONFIG_TOSHIBA_RBTX4938 is not set
+CONFIG_TRAD_SIGNALS=y
+# CONFIG_USBPCWATCHDOG is not set
+# CONFIG_USB_EHCI_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USER_NS is not set
+# CONFIG_VGASTATE is not set
+# CONFIG_VIA_RHINE is not set
+CONFIG_ZONE_DMA_FLAG=0
--- /dev/null
+# copyright 2007 john crispin <blogic@openwrt.org>
+
+menu "Danube built-in"
+
+config DANUBE_ASC_UART
+ bool "Danube asc uart"
+ select SERIAL_CORE
+ select SERIAL_CORE_CONSOLE
+ default y
+
+config MTD_DANUBE
+ bool "Danube flash map"
+ default y
+
+config DANUBE_WDT
+ bool "Danube watchdog"
+ default y
+
+config DANUBE_LED
+ bool "Danube led"
+ default y
+
+config DANUBE_GPIO
+ bool "Danube gpio"
+ default y
+
+config DANUBE_SSC
+ bool "Danube ssc"
+ default y
+
+config DANUBE_EEPROM
+ bool "Danube eeprom"
+ default y
+
+endmenu
+
--- /dev/null
+#
+# Copyright 2007 openwrt.org
+# John Crispin <blogic@openwrt.org>
+#
+# Makefile for Infineon Danube
+#
+obj-y := reset.o prom.o setup.o interrupt.o dma-core.o
+
+obj-$(CONFIG_PCI) += pci.o
+obj-$(CONFIG_KGDB) += kgdb_serial.o
--- /dev/null
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/timer.h>
+#include <linux/fs.h>
+#include <linux/errno.h>
+#include <linux/stat.h>
+#include <linux/mm.h>
+#include <linux/tty.h>
+#include <linux/selection.h>
+#include <linux/kmod.h>
+#include <linux/vmalloc.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+#include <asm/uaccess.h>
+#include <linux/errno.h>
+#include <asm/io.h>
+
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/danube/danube_dma.h>
+#include <asm/danube/danube_pmu.h>
+
+/*25 descriptors for each dma channel,4096/8/20=25.xx*/
+#define DANUBE_DMA_DESCRIPTOR_OFFSET 25
+
+#define MAX_DMA_DEVICE_NUM 6 /*max ports connecting to dma */
+#define MAX_DMA_CHANNEL_NUM 20 /*max dma channels */
+#define DMA_INT_BUDGET 100 /*budget for interrupt handling */
+#define DMA_POLL_COUNTER 4 /*fix me, set the correct counter value here! */
+
+extern void mask_and_ack_danube_irq (unsigned int irq_nr);
+extern void enable_danube_irq (unsigned int irq_nr);
+extern void disable_danube_irq (unsigned int irq_nr);
+
+u64 *g_desc_list;
+_dma_device_info dma_devs[MAX_DMA_DEVICE_NUM];
+_dma_channel_info dma_chan[MAX_DMA_CHANNEL_NUM];
+
+char global_device_name[MAX_DMA_DEVICE_NUM][20] =
+ { {"PPE"}, {"DEU"}, {"SPI"}, {"SDIO"}, {"MCTRL0"}, {"MCTRL1"} };
+
+_dma_chan_map default_dma_map[MAX_DMA_CHANNEL_NUM] = {
+ {"PPE", DANUBE_DMA_RX, 0, DANUBE_DMA_CH0_INT, 0},
+ {"PPE", DANUBE_DMA_TX, 0, DANUBE_DMA_CH1_INT, 0},
+ {"PPE", DANUBE_DMA_RX, 1, DANUBE_DMA_CH2_INT, 1},
+ {"PPE", DANUBE_DMA_TX, 1, DANUBE_DMA_CH3_INT, 1},
+ {"PPE", DANUBE_DMA_RX, 2, DANUBE_DMA_CH4_INT, 2},
+ {"PPE", DANUBE_DMA_TX, 2, DANUBE_DMA_CH5_INT, 2},
+ {"PPE", DANUBE_DMA_RX, 3, DANUBE_DMA_CH6_INT, 3},
+ {"PPE", DANUBE_DMA_TX, 3, DANUBE_DMA_CH7_INT, 3},
+ {"DEU", DANUBE_DMA_RX, 0, DANUBE_DMA_CH8_INT, 0},
+ {"DEU", DANUBE_DMA_TX, 0, DANUBE_DMA_CH9_INT, 0},
+ {"DEU", DANUBE_DMA_RX, 1, DANUBE_DMA_CH10_INT, 1},
+ {"DEU", DANUBE_DMA_TX, 1, DANUBE_DMA_CH11_INT, 1},
+ {"SPI", DANUBE_DMA_RX, 0, DANUBE_DMA_CH12_INT, 0},
+ {"SPI", DANUBE_DMA_TX, 0, DANUBE_DMA_CH13_INT, 0},
+ {"SDIO", DANUBE_DMA_RX, 0, DANUBE_DMA_CH14_INT, 0},
+ {"SDIO", DANUBE_DMA_TX, 0, DANUBE_DMA_CH15_INT, 0},
+ {"MCTRL0", DANUBE_DMA_RX, 0, DANUBE_DMA_CH16_INT, 0},
+ {"MCTRL0", DANUBE_DMA_TX, 0, DANUBE_DMA_CH17_INT, 0},
+ {"MCTRL1", DANUBE_DMA_RX, 1, DANUBE_DMA_CH18_INT, 1},
+ {"MCTRL1", DANUBE_DMA_TX, 1, DANUBE_DMA_CH19_INT, 1}
+};
+
+_dma_chan_map *chan_map = default_dma_map;
+volatile u32 g_danube_dma_int_status = 0;
+volatile int g_danube_dma_in_process = 0;/*0=not in process,1=in process*/
+
+void do_dma_tasklet (unsigned long);
+DECLARE_TASKLET (dma_tasklet, do_dma_tasklet, 0);
+
+u8*
+common_buffer_alloc (int len, int *byte_offset, void **opt)
+{
+ u8 *buffer = (u8 *) kmalloc (len * sizeof (u8), GFP_KERNEL);
+
+ *byte_offset = 0;
+
+ return buffer;
+}
+
+void
+common_buffer_free (u8 *dataptr, void *opt)
+{
+ if (dataptr)
+ kfree(dataptr);
+}
+
+void
+enable_ch_irq (_dma_channel_info *pCh)
+{
+ int chan_no = (int)(pCh - dma_chan);
+ int flag;
+
+ local_irq_save(flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(0x4a, DANUBE_DMA_CIE);
+ writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
+ local_irq_restore(flag);
+ enable_danube_irq(pCh->irq);
+}
+
+void
+disable_ch_irq (_dma_channel_info *pCh)
+{
+ int flag;
+ int chan_no = (int) (pCh - dma_chan);
+
+ local_irq_save(flag);
+ g_danube_dma_int_status &= ~(1 << chan_no);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(0, DANUBE_DMA_CIE);
+ writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN);
+ local_irq_restore(flag);
+ mask_and_ack_danube_irq(pCh->irq);
+}
+
+void
+open_chan (_dma_channel_info *pCh)
+{
+ int flag;
+ int chan_no = (int)(pCh - dma_chan);
+
+ local_irq_save(flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(readl(DANUBE_DMA_CCTRL) | 1, DANUBE_DMA_CCTRL);
+ if(pCh->dir == DANUBE_DMA_RX)
+ enable_ch_irq(pCh);
+ local_irq_restore(flag);
+}
+
+void
+close_chan(_dma_channel_info *pCh)
+{
+ int flag;
+ int chan_no = (int) (pCh - dma_chan);
+
+ local_irq_save(flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
+ disable_ch_irq(pCh);
+ local_irq_restore(flag);
+}
+
+void
+reset_chan (_dma_channel_info *pCh)
+{
+ int chan_no = (int) (pCh - dma_chan);
+
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
+}
+
+void
+rx_chan_intr_handler (int chan_no)
+{
+ _dma_device_info *pDev = (_dma_device_info *)dma_chan[chan_no].dma_dev;
+ _dma_channel_info *pCh = &dma_chan[chan_no];
+ struct rx_desc *rx_desc_p;
+ int tmp;
+ int flag;
+
+ /*handle command complete interrupt */
+ rx_desc_p = (struct rx_desc*)pCh->desc_base + pCh->curr_desc;
+ if (rx_desc_p->status.field.OWN == CPU_OWN
+ && rx_desc_p->status.field.C
+ && rx_desc_p->status.field.data_length < 1536){
+ /*Every thing is correct, then we inform the upper layer */
+ pDev->current_rx_chan = pCh->rel_chan_no;
+ if(pDev->intr_handler)
+ pDev->intr_handler(pDev, RCV_INT);
+ pCh->weight--;
+ } else {
+ local_irq_save(flag);
+ tmp = readl(DANUBE_DMA_CS);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
+ writel(tmp, DANUBE_DMA_CS);
+ g_danube_dma_int_status &= ~(1 << chan_no);
+ local_irq_restore(flag);
+ enable_danube_irq(dma_chan[chan_no].irq);
+ }
+}
+
+inline void
+tx_chan_intr_handler (int chan_no)
+{
+ _dma_device_info *pDev = (_dma_device_info*)dma_chan[chan_no].dma_dev;
+ _dma_channel_info *pCh = &dma_chan[chan_no];
+ int tmp;
+ int flag;
+
+ local_irq_save(flag);
+ tmp = readl(DANUBE_DMA_CS);
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(readl(DANUBE_DMA_CIS) | 0x7e, DANUBE_DMA_CIS);
+ writel(tmp, DANUBE_DMA_CS);
+ g_danube_dma_int_status &= ~(1 << chan_no);
+ local_irq_restore(flag);
+ pDev->current_tx_chan = pCh->rel_chan_no;
+ if (pDev->intr_handler)
+ pDev->intr_handler(pDev, TRANSMIT_CPT_INT);
+}
+
+void
+do_dma_tasklet (unsigned long unused)
+{
+ int i;
+ int chan_no = 0;
+ int budget = DMA_INT_BUDGET;
+ int weight = 0;
+ int flag;
+
+ while (g_danube_dma_int_status)
+ {
+ if (budget-- < 0)
+ {
+ tasklet_schedule(&dma_tasklet);
+ return;
+ }
+ chan_no = -1;
+ weight = 0;
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ {
+ if ((g_danube_dma_int_status & (1 << i)) && dma_chan[i].weight > 0)
+ {
+ if (dma_chan[i].weight > weight)
+ {
+ chan_no = i;
+ weight = dma_chan[chan_no].weight;
+ }
+ }
+ }
+
+ if (chan_no >= 0)
+ {
+ if (chan_map[chan_no].dir == DANUBE_DMA_RX)
+ rx_chan_intr_handler(chan_no);
+ else
+ tx_chan_intr_handler(chan_no);
+ } else {
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ {
+ dma_chan[i].weight = dma_chan[i].default_weight;
+ }
+ }
+ }
+
+ local_irq_save(flag);
+ g_danube_dma_in_process = 0;
+ if (g_danube_dma_int_status)
+ {
+ g_danube_dma_in_process = 1;
+ tasklet_schedule(&dma_tasklet);
+ }
+ local_irq_restore(flag);
+}
+
+irqreturn_t
+dma_interrupt (int irq, void *dev_id)
+{
+ _dma_channel_info *pCh;
+ int chan_no = 0;
+ int tmp;
+
+ pCh = (_dma_channel_info*)dev_id;
+ chan_no = (int)(pCh - dma_chan);
+ if (chan_no < 0 || chan_no > 19)
+ BUG();
+
+ tmp = readl(DANUBE_DMA_IRNEN);
+ writel(0, DANUBE_DMA_IRNEN);
+ g_danube_dma_int_status |= 1 << chan_no;
+ writel(tmp, DANUBE_DMA_IRNEN);
+ mask_and_ack_danube_irq(irq);
+
+ if (!g_danube_dma_in_process)
+ {
+ g_danube_dma_in_process = 1;
+ tasklet_schedule(&dma_tasklet);
+ }
+
+ return IRQ_HANDLED;
+}
+
+_dma_device_info*
+dma_device_reserve (char *dev_name)
+{
+ int i;
+
+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
+ {
+ if (strcmp(dev_name, dma_devs[i].device_name) == 0)
+ {
+ if (dma_devs[i].reserved)
+ return NULL;
+ dma_devs[i].reserved = 1;
+ break;
+ }
+ }
+
+ return &dma_devs[i];
+}
+
+void
+dma_device_release (_dma_device_info *dev)
+{
+ dev->reserved = 0;
+}
+
+void
+dma_device_register(_dma_device_info *dev)
+{
+ int i, j;
+ int chan_no = 0;
+ u8 *buffer;
+ int byte_offset;
+ int flag;
+ _dma_device_info *pDev;
+ _dma_channel_info *pCh;
+ struct rx_desc *rx_desc_p;
+ struct tx_desc *tx_desc_p;
+
+ for (i = 0; i < dev->max_tx_chan_num; i++)
+ {
+ pCh = dev->tx_chan[i];
+ if (pCh->control == DANUBE_DMA_CH_ON)
+ {
+ chan_no = (int)(pCh - dma_chan);
+ for (j = 0; j < pCh->desc_len; j++)
+ {
+ tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
+ memset(tx_desc_p, 0, sizeof(struct tx_desc));
+ }
+ local_irq_save(flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ /*check if the descriptor length is changed */
+ if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
+ writel(pCh->desc_len, DANUBE_DMA_CDLEN);
+
+ writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
+ writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
+ while (readl(DANUBE_DMA_CCTRL) & 2){};
+ writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
+ writel(0x30100, DANUBE_DMA_CCTRL); /*reset and enable channel,enable channel later */
+ local_irq_restore(flag);
+ }
+ }
+
+ for (i = 0; i < dev->max_rx_chan_num; i++)
+ {
+ pCh = dev->rx_chan[i];
+ if (pCh->control == DANUBE_DMA_CH_ON)
+ {
+ chan_no = (int)(pCh - dma_chan);
+
+ for (j = 0; j < pCh->desc_len; j++)
+ {
+ rx_desc_p = (struct rx_desc*)pCh->desc_base + j;
+ pDev = (_dma_device_info*)(pCh->dma_dev);
+ buffer = pDev->buffer_alloc(pCh->packet_size, &byte_offset, (void*)&(pCh->opt[j]));
+ if (!buffer)
+ break;
+
+ dma_cache_inv((unsigned long) buffer, pCh->packet_size);
+
+ rx_desc_p->Data_Pointer = (u32)CPHYSADDR((u32)buffer);
+ rx_desc_p->status.word = 0;
+ rx_desc_p->status.field.byte_offset = byte_offset;
+ rx_desc_p->status.field.OWN = DMA_OWN;
+ rx_desc_p->status.field.data_length = pCh->packet_size;
+ }
+
+ local_irq_save(flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ /*check if the descriptor length is changed */
+ if (readl(DANUBE_DMA_CDLEN) != pCh->desc_len)
+ writel(pCh->desc_len, DANUBE_DMA_CDLEN);
+ writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
+ writel(readl(DANUBE_DMA_CCTRL) | 2, DANUBE_DMA_CCTRL);
+ while (readl(DANUBE_DMA_CCTRL) & 2){};
+ writel(0x0a, DANUBE_DMA_CIE); /*fix me, should enable all the interrupts here? */
+ writel(readl(DANUBE_DMA_IRNEN) | (1 << chan_no), DANUBE_DMA_IRNEN);
+ writel(0x30000, DANUBE_DMA_CCTRL);
+ local_irq_restore(flag);
+ enable_danube_irq(dma_chan[chan_no].irq);
+ }
+ }
+}
+
+void
+dma_device_unregister (_dma_device_info *dev)
+{
+ int i, j;
+ int chan_no;
+ _dma_channel_info *pCh;
+ struct rx_desc *rx_desc_p;
+ struct tx_desc *tx_desc_p;
+ int flag;
+
+ for (i = 0; i < dev->max_tx_chan_num; i++)
+ {
+ pCh = dev->tx_chan[i];
+ if (pCh->control == DANUBE_DMA_CH_ON)
+ {
+ chan_no = (int)(dev->tx_chan[i] - dma_chan);
+ local_irq_save (flag);
+ writel(chan_no, DANUBE_DMA_CS);
+ pCh->curr_desc = 0;
+ pCh->prev_desc = 0;
+ pCh->control = DANUBE_DMA_CH_OFF;
+ writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
+ writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
+ writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
+ while (readl(DANUBE_DMA_CCTRL) & 1) {};
+ local_irq_restore (flag);
+
+ for (j = 0; j < pCh->desc_len; j++)
+ {
+ tx_desc_p = (struct tx_desc*)pCh->desc_base + j;
+ if ((tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
+ || (tx_desc_p->status.field.OWN == DMA_OWN && tx_desc_p->status.field.data_length > 0))
+ {
+ dev->buffer_free ((u8 *) __va (tx_desc_p->Data_Pointer), (void*)pCh->opt[j]);
+ }
+ tx_desc_p->status.field.OWN = CPU_OWN;
+ memset (tx_desc_p, 0, sizeof (struct tx_desc));
+ }
+ //TODO should free buffer that is not transferred by dma
+ }
+ }
+
+ for (i = 0; i < dev->max_rx_chan_num; i++)
+ {
+ pCh = dev->rx_chan[i];
+ chan_no = (int)(dev->rx_chan[i] - dma_chan);
+ disable_danube_irq(pCh->irq);
+
+ local_irq_save(flag);
+ g_danube_dma_int_status &= ~(1 << chan_no);
+ pCh->curr_desc = 0;
+ pCh->prev_desc = 0;
+ pCh->control = DANUBE_DMA_CH_OFF;
+
+ writel(chan_no, DANUBE_DMA_CS);
+ writel(0, DANUBE_DMA_CIE); /*fix me, should disable all the interrupts here? */
+ writel(readl(DANUBE_DMA_IRNEN) & ~(1 << chan_no), DANUBE_DMA_IRNEN); /*disable interrupts */
+ writel(readl(DANUBE_DMA_CCTRL) & ~1, DANUBE_DMA_CCTRL);
+ while (readl(DANUBE_DMA_CCTRL) & 1) {};
+
+ local_irq_restore (flag);
+ for (j = 0; j < pCh->desc_len; j++)
+ {
+ rx_desc_p = (struct rx_desc *) pCh->desc_base + j;
+ if ((rx_desc_p->status.field.OWN == CPU_OWN
+ && rx_desc_p->status.field.C)
+ || (rx_desc_p->status.field.OWN == DMA_OWN
+ && rx_desc_p->status.field.data_length > 0)) {
+ dev->buffer_free ((u8 *)
+ __va (rx_desc_p->
+ Data_Pointer),
+ (void *) pCh->opt[j]);
+ }
+ }
+ }
+}
+
+int
+dma_device_read (struct dma_device_info *dma_dev, u8 ** dataptr, void **opt)
+{
+ u8 *buf;
+ int len;
+ int byte_offset = 0;
+ void *p = NULL;
+ _dma_channel_info *pCh = dma_dev->rx_chan[dma_dev->current_rx_chan];
+ struct rx_desc *rx_desc_p;
+
+ /*get the rx data first */
+ rx_desc_p = (struct rx_desc *) pCh->desc_base + pCh->curr_desc;
+ if (!(rx_desc_p->status.field.OWN == CPU_OWN && rx_desc_p->status.field.C))
+ {
+ return 0;
+ }
+
+ buf = (u8 *) __va (rx_desc_p->Data_Pointer);
+ *(u32*)dataptr = (u32)buf;
+ len = rx_desc_p->status.field.data_length;
+
+ if (opt)
+ {
+ *(int*)opt = (int)pCh->opt[pCh->curr_desc];
+ }
+
+ /*replace with a new allocated buffer */
+ buf = dma_dev->buffer_alloc(pCh->packet_size, &byte_offset, &p);
+
+ if (buf)
+ {
+ dma_cache_inv ((unsigned long) buf,
+ pCh->packet_size);
+ pCh->opt[pCh->curr_desc] = p;
+ wmb ();
+
+ rx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) buf);
+ rx_desc_p->status.word = (DMA_OWN << 31) | ((byte_offset) << 23) | pCh->packet_size;
+ wmb ();
+ } else {
+ *(u32 *) dataptr = 0;
+ if (opt)
+ *(int *) opt = 0;
+ len = 0;
+ }
+
+ /*increase the curr_desc pointer */
+ pCh->curr_desc++;
+ if (pCh->curr_desc == pCh->desc_len)
+ pCh->curr_desc = 0;
+
+ return len;
+}
+
+int
+dma_device_write (struct dma_device_info *dma_dev, u8 * dataptr, int len, void *opt)
+{
+ int flag;
+ u32 tmp, byte_offset;
+ _dma_channel_info *pCh;
+ int chan_no;
+ struct tx_desc *tx_desc_p;
+ local_irq_save (flag);
+
+ pCh = dma_dev->tx_chan[dma_dev->current_tx_chan];
+ chan_no = (int)(pCh - (_dma_channel_info *) dma_chan);
+
+ tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
+ while (tx_desc_p->status.field.OWN == CPU_OWN && tx_desc_p->status.field.C)
+ {
+ dma_dev->buffer_free((u8 *) __va (tx_desc_p->Data_Pointer), pCh->opt[pCh->prev_desc]);
+ memset(tx_desc_p, 0, sizeof (struct tx_desc));
+ pCh->prev_desc = (pCh->prev_desc + 1) % (pCh->desc_len);
+ tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->prev_desc;
+ }
+ tx_desc_p = (struct tx_desc*)pCh->desc_base + pCh->curr_desc;
+ /*Check whether this descriptor is available */
+ if (tx_desc_p->status.field.OWN == DMA_OWN || tx_desc_p->status.field.C)
+ {
+ /*if not , the tell the upper layer device */
+ dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
+ local_irq_restore(flag);
+ printk (KERN_INFO "%s %d: failed to write!\n", __func__, __LINE__);
+
+ return 0;
+ }
+ pCh->opt[pCh->curr_desc] = opt;
+ /*byte offset----to adjust the starting address of the data buffer, should be multiple of the burst length. */
+ byte_offset = ((u32) CPHYSADDR ((u32) dataptr)) % ((dma_dev->tx_burst_len) * 4);
+ dma_cache_wback ((unsigned long) dataptr, len);
+ wmb ();
+ tx_desc_p->Data_Pointer = (u32) CPHYSADDR ((u32) dataptr) - byte_offset;
+ wmb ();
+ tx_desc_p->status.word = (DMA_OWN << 31) | DMA_DESC_SOP_SET | DMA_DESC_EOP_SET | ((byte_offset) << 23) | len;
+ wmb ();
+
+ pCh->curr_desc++;
+ if (pCh->curr_desc == pCh->desc_len)
+ pCh->curr_desc = 0;
+
+ /*Check whether this descriptor is available */
+ tx_desc_p = (struct tx_desc *) pCh->desc_base + pCh->curr_desc;
+ if (tx_desc_p->status.field.OWN == DMA_OWN)
+ {
+ /*if not , the tell the upper layer device */
+ dma_dev->intr_handler (dma_dev, TX_BUF_FULL_INT);
+ }
+
+ writel(chan_no, DANUBE_DMA_CS);
+ tmp = readl(DANUBE_DMA_CCTRL);
+
+ if (!(tmp & 1))
+ pCh->open (pCh);
+
+ local_irq_restore (flag);
+
+ return len;
+}
+
+int
+map_dma_chan(_dma_chan_map *map)
+{
+ int i, j;
+ int result;
+
+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
+ {
+ strcpy(dma_devs[i].device_name, global_device_name[i]);
+ }
+
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ {
+ dma_chan[i].irq = map[i].irq;
+ result = request_irq(dma_chan[i].irq, dma_interrupt, SA_INTERRUPT, "dma-core", (void*)&dma_chan[i]);
+ if (result)
+ {
+ printk("error, cannot get dma_irq!\n");
+ free_irq(dma_chan[i].irq, (void *) &dma_interrupt);
+
+ return -EFAULT;
+ }
+ }
+
+ for (i = 0; i < MAX_DMA_DEVICE_NUM; i++)
+ {
+ dma_devs[i].num_tx_chan = 0; /*set default tx channel number to be one */
+ dma_devs[i].num_rx_chan = 0; /*set default rx channel number to be one */
+ dma_devs[i].max_rx_chan_num = 0;
+ dma_devs[i].max_tx_chan_num = 0;
+ dma_devs[i].buffer_alloc = &common_buffer_alloc;
+ dma_devs[i].buffer_free = &common_buffer_free;
+ dma_devs[i].intr_handler = NULL;
+ dma_devs[i].tx_burst_len = 4;
+ dma_devs[i].rx_burst_len = 4;
+ if (i == 0)
+ {
+ writel(0, DANUBE_DMA_PS);
+ writel(readl(DANUBE_DMA_PCTRL) | ((0xf << 8) | (1 << 6)), DANUBE_DMA_PCTRL); /*enable dma drop */
+ }
+
+ if (i == 1)
+ {
+ writel(1, DANUBE_DMA_PS);
+ writel(0x14, DANUBE_DMA_PCTRL); /*deu port setting */
+ }
+
+ for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
+ {
+ dma_chan[j].byte_offset = 0;
+ dma_chan[j].open = &open_chan;
+ dma_chan[j].close = &close_chan;
+ dma_chan[j].reset = &reset_chan;
+ dma_chan[j].enable_irq = &enable_ch_irq;
+ dma_chan[j].disable_irq = &disable_ch_irq;
+ dma_chan[j].rel_chan_no = map[j].rel_chan_no;
+ dma_chan[j].control = DANUBE_DMA_CH_OFF;
+ dma_chan[j].default_weight = DANUBE_DMA_CH_DEFAULT_WEIGHT;
+ dma_chan[j].weight = dma_chan[j].default_weight;
+ dma_chan[j].curr_desc = 0;
+ dma_chan[j].prev_desc = 0;
+ }
+
+ for (j = 0; j < MAX_DMA_CHANNEL_NUM; j++)
+ {
+ if (strcmp(dma_devs[i].device_name, map[j].dev_name) == 0)
+ {
+ if (map[j].dir == DANUBE_DMA_RX)
+ {
+ dma_chan[j].dir = DANUBE_DMA_RX;
+ dma_devs[i].max_rx_chan_num++;
+ dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1] = &dma_chan[j];
+ dma_devs[i].rx_chan[dma_devs[i].max_rx_chan_num - 1]->pri = map[j].pri;
+ dma_chan[j].dma_dev = (void*)&dma_devs[i];
+ } else if(map[j].dir == DANUBE_DMA_TX)
+ { /*TX direction */
+ dma_chan[j].dir = DANUBE_DMA_TX;
+ dma_devs[i].max_tx_chan_num++;
+ dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1] = &dma_chan[j];
+ dma_devs[i].tx_chan[dma_devs[i].max_tx_chan_num - 1]->pri = map[j].pri;
+ dma_chan[j].dma_dev = (void*)&dma_devs[i];
+ } else {
+ printk ("WRONG DMA MAP!\n");
+ }
+ }
+ }
+ }
+
+ return 0;
+}
+
+void
+dma_chip_init(void)
+{
+ int i;
+
+ // enable DMA from PMU
+ danube_pmu_enable(DANUBE_PMU_PWDCR_DMA);
+
+ // reset DMA
+ writel(readl(DANUBE_DMA_CTRL) | 1, DANUBE_DMA_CTRL);
+
+ // diable all interrupts
+ writel(0, DANUBE_DMA_IRNEN);
+
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ {
+ writel(i, DANUBE_DMA_CS);
+ writel(0x2, DANUBE_DMA_CCTRL);
+ writel(0x80000040, DANUBE_DMA_CPOLL);
+ writel(readl(DANUBE_DMA_CCTRL) & ~0x1, DANUBE_DMA_CCTRL);
+
+ }
+}
+
+int
+danube_dma_init (void)
+{
+ int i;
+
+ dma_chip_init();
+ if (map_dma_chan(default_dma_map))
+ BUG();
+
+ g_desc_list = (u64*)KSEG1ADDR(__get_free_page(GFP_DMA));
+
+ if (g_desc_list == NULL)
+ {
+ printk("no memory for desriptor\n");
+ return -ENOMEM;
+ }
+
+ memset(g_desc_list, 0, PAGE_SIZE);
+
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ {
+ dma_chan[i].desc_base = (u32)g_desc_list + i * DANUBE_DMA_DESCRIPTOR_OFFSET * 8;
+ dma_chan[i].curr_desc = 0;
+ dma_chan[i].desc_len = DANUBE_DMA_DESCRIPTOR_OFFSET;
+
+ writel(i, DANUBE_DMA_CS);
+ writel((u32)CPHYSADDR(dma_chan[i].desc_base), DANUBE_DMA_CDBA);
+ writel(dma_chan[i].desc_len, DANUBE_DMA_CDLEN);
+ }
+
+ return 0;
+}
+
+arch_initcall(danube_dma_init);
+
+void
+dma_cleanup(void)
+{
+ int i;
+
+ free_page(KSEG0ADDR((unsigned long) g_desc_list));
+ for (i = 0; i < MAX_DMA_CHANNEL_NUM; i++)
+ free_irq(dma_chan[i].irq, (void*)&dma_interrupt);
+}
+
+EXPORT_SYMBOL (dma_device_reserve);
+EXPORT_SYMBOL (dma_device_release);
+EXPORT_SYMBOL (dma_device_register);
+EXPORT_SYMBOL (dma_device_unregister);
+EXPORT_SYMBOL (dma_device_read);
+EXPORT_SYMBOL (dma_device_write);
+
+MODULE_LICENSE ("GPL");
--- /dev/null
+/*
+ * arch/mips/danube/interrupt.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 Wu Qi Ming infineon
+ *
+ * Rewrite of Infineon Danube code, thanks to infineon for the support,
+ * software and hardware
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/sched.h>
+#include <linux/slab.h>
+#include <linux/interrupt.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+
+#include <asm/bootinfo.h>
+#include <asm/irq.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/irq_cpu.h>
+
+
+void
+disable_danube_irq (unsigned int irq_nr)
+{
+ int i;
+ u32 *danube_ier = DANUBE_ICU_IM0_IER;
+
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr < INT_NUM_IM_OFFSET){
+ writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
+ return;
+ }
+ danube_ier += DANUBE_ICU_OFFSET;
+ irq_nr -= INT_NUM_IM_OFFSET;
+ }
+}
+EXPORT_SYMBOL (disable_danube_irq);
+
+void
+mask_and_ack_danube_irq (unsigned int irq_nr)
+{
+ int i;
+ u32 *danube_ier = DANUBE_ICU_IM0_IER;
+ u32 *danube_isr = DANUBE_ICU_IM0_ISR;
+
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr < INT_NUM_IM_OFFSET)
+ {
+ writel(readl(danube_ier) & ~(1 << irq_nr ), danube_ier);
+ writel((1 << irq_nr ), danube_isr);
+ return;
+ }
+ danube_ier += DANUBE_ICU_OFFSET;
+ danube_isr += DANUBE_ICU_OFFSET;
+ irq_nr -= INT_NUM_IM_OFFSET;
+ }
+}
+EXPORT_SYMBOL (mask_and_ack_danube_irq);
+
+void
+enable_danube_irq (unsigned int irq_nr)
+{
+ int i;
+ u32 *danube_ier = DANUBE_ICU_IM0_IER;
+
+ irq_nr -= INT_NUM_IRQ0;
+ for (i = 0; i <= 4; i++)
+ {
+ if (irq_nr < INT_NUM_IM_OFFSET)
+ {
+ writel(readl(danube_ier) | (1 << irq_nr ), danube_ier);
+ return;
+ }
+ danube_ier += DANUBE_ICU_OFFSET;
+ irq_nr -= INT_NUM_IM_OFFSET;
+ }
+}
+EXPORT_SYMBOL (enable_danube_irq);
+
+static unsigned int
+startup_danube_irq (unsigned int irq)
+{
+ enable_danube_irq (irq);
+ return 0;
+}
+
+static void
+end_danube_irq (unsigned int irq)
+{
+ if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS)))
+ enable_danube_irq (irq);
+}
+
+static struct hw_interrupt_type danube_irq_type = {
+ "DANUBE",
+ .startup = startup_danube_irq,
+ .enable = enable_danube_irq,
+ .disable = disable_danube_irq,
+ .unmask = enable_danube_irq,
+ .ack = end_danube_irq,
+ .mask = disable_danube_irq,
+ .mask_ack = mask_and_ack_danube_irq,
+ .end = end_danube_irq,
+};
+
+static inline int
+ls1bit32(unsigned long x)
+{
+ __asm__ (
+ " .set push \n"
+ " .set mips32 \n"
+ " clz %0, %1 \n"
+ " .set pop \n"
+ : "=r" (x)
+ : "r" (x));
+
+ return 31 - x;
+}
+
+void
+danube_hw_irqdispatch (int module)
+{
+ u32 irq;
+
+ irq = readl(DANUBE_ICU_IM0_IOSR + (module * DANUBE_ICU_OFFSET));
+ if (irq == 0)
+ return;
+
+ irq = ls1bit32 (irq);
+ do_IRQ ((int) irq + INT_NUM_IM0_IRL0 + (INT_NUM_IM_OFFSET * module));
+
+ if ((irq == 22) && (module == 0)){
+ writel(readl(DANUBE_EBU_PCC_ISTAT) | 0x10, DANUBE_EBU_PCC_ISTAT);
+ }
+}
+
+asmlinkage void
+plat_irq_dispatch (void)
+{
+ unsigned int pending = read_c0_status() & read_c0_cause() & ST0_IM;
+ unsigned int i;
+
+ if (pending & CAUSEF_IP7){
+ do_IRQ(MIPS_CPU_TIMER_IRQ);
+ goto out;
+ } else {
+ for (i = 0; i < 5; i++)
+ {
+ if (pending & (CAUSEF_IP2 << i))
+ {
+ danube_hw_irqdispatch(i);
+ goto out;
+ }
+ }
+ }
+ printk("Spurious IRQ: CAUSE=0x%08x\n", read_c0_status());
+
+out:
+ return;
+}
+
+static struct irqaction cascade = {
+ .handler = no_action,
+ .flags = IRQF_DISABLED,
+ .name = "cascade",
+};
+
+void __init
+arch_init_irq(void)
+{
+ int i;
+
+ for (i = 0; i < 5; i++)
+ {
+ writel(0, DANUBE_ICU_IM0_IER + (i * DANUBE_ICU_OFFSET));
+ }
+
+ mips_cpu_irq_init();
+
+ for (i = 2; i <= 6; i++)
+ {
+ setup_irq(i, &cascade);
+ }
+
+ for (i = INT_NUM_IRQ0; i <= (INT_NUM_IRQ0 + (5 * INT_NUM_IM_OFFSET)); i++)
+ {
+#if 0
+ irq_desc[i].status = IRQ_DISABLED;
+ irq_desc[i].action = NULL;
+ irq_desc[i].depth = 1;
+#endif
+ set_irq_chip_and_handler(i, &danube_irq_type, handle_level_irq);
+ }
+
+ set_c0_status (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4 | IE_IRQ5);
+}
--- /dev/null
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/mm.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/addrspace.h>
+#include <linux/vmalloc.h>
+
+#define DANUBE_PCI_MEM_BASE 0x18000000
+#define DANUBE_PCI_MEM_SIZE 0x02000000
+#define DANUBE_PCI_IO_BASE 0x1AE00000
+#define DANUBE_PCI_IO_SIZE 0x00200000
+
+#define DANUBE_PCI_CFG_BUSNUM_SHF 16
+#define DANUBE_PCI_CFG_DEVNUM_SHF 11
+#define DANUBE_PCI_CFG_FUNNUM_SHF 8
+
+#define PCI_ACCESS_READ 0
+#define PCI_ACCESS_WRITE 1
+
+static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 *val);
+static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn, int where, int size, u32 val);
+
+struct pci_ops danube_pci_ops = {
+ .read = danube_pci_read_config_dword,
+ .write = danube_pci_write_config_dword
+};
+
+static struct resource pci_io_resource = {
+ .name = "io pci IO space",
+ .start = DANUBE_PCI_IO_BASE,
+ .end = DANUBE_PCI_IO_BASE + DANUBE_PCI_IO_SIZE - 1,
+ .flags = IORESOURCE_IO
+};
+
+static struct resource pci_mem_resource = {
+ .name = "ext pci memory space",
+ .start = DANUBE_PCI_MEM_BASE,
+ .end = DANUBE_PCI_MEM_BASE + DANUBE_PCI_MEM_SIZE - 1,
+ .flags = IORESOURCE_MEM
+};
+
+static struct pci_controller danube_pci_controller = {
+ .pci_ops = &danube_pci_ops,
+ .mem_resource = &pci_mem_resource,
+ .mem_offset = 0x00000000UL,
+ .io_resource = &pci_io_resource,
+ .io_offset = 0x00000000UL,
+};
+
+static u32 danube_pci_mapped_cfg;
+
+static int
+danube_pci_config_access(unsigned char access_type,
+ struct pci_bus *bus, unsigned int devfn, unsigned int where, u32 *data)
+{
+ unsigned long cfg_base;
+ unsigned long flags;
+
+ u32 temp;
+
+ /* Danube support slot from 0 to 15 */
+ /* dev_fn 0&0x68 (AD29) is danube itself */
+ if ((bus->number != 0) || ((devfn & 0xf8) > 0x78)
+ || ((devfn & 0xf8) == 0) || ((devfn & 0xf8) == 0x68))
+ return 1;
+
+ local_irq_save(flags);
+
+ cfg_base = danube_pci_mapped_cfg;
+ cfg_base |= (bus->number << DANUBE_PCI_CFG_BUSNUM_SHF) | (devfn <<
+ DANUBE_PCI_CFG_FUNNUM_SHF) | (where & ~0x3);
+
+ /* Perform access */
+ if (access_type == PCI_ACCESS_WRITE)
+ {
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ writel(swab32(*data), ((u32*)cfg_base));
+#else
+ writel(*data, ((u32*)cfg_base));
+#endif
+ } else {
+ *data = readl(((u32*)(cfg_base)));
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ *data = swab32(*data);
+#endif
+ }
+ wmb();
+
+ /* clean possible Master abort */
+ cfg_base = (danube_pci_mapped_cfg | (0x0 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
+ temp = readl(((u32*)(cfg_base)));
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ temp = swab32 (temp);
+#endif
+ cfg_base = (danube_pci_mapped_cfg | (0x68 << DANUBE_PCI_CFG_FUNNUM_SHF)) + 4;
+ writel(temp, ((u32*)cfg_base));
+
+ local_irq_restore(flags);
+
+ if (((*data) == 0xffffffff) && (access_type == PCI_ACCESS_READ))
+ return 1;
+
+ return 0;
+}
+
+static int danube_pci_read_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 * val)
+{
+ u32 data = 0;
+
+ if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ *val = (data >> ((where & 3) << 3)) & 0xff;
+ else if (size == 2)
+ *val = (data >> ((where & 3) << 3)) & 0xffff;
+ else
+ *val = data;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+static int danube_pci_write_config_dword(struct pci_bus *bus, unsigned int devfn,
+ int where, int size, u32 val)
+{
+ u32 data = 0;
+
+ if (size == 4)
+ {
+ data = val;
+ } else {
+ if (danube_pci_config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ if (size == 1)
+ data = (data & ~(0xff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ else if (size == 2)
+ data = (data & ~(0xffff << ((where & 3) << 3))) |
+ (val << ((where & 3) << 3));
+ }
+
+ if (danube_pci_config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
+ return PCIBIOS_DEVICE_NOT_FOUND;
+
+ return PCIBIOS_SUCCESSFUL;
+}
+
+
+int pcibios_plat_dev_init(struct pci_dev *dev){
+ u8 pin;
+
+ pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin);
+
+ switch(pin) {
+ case 0:
+ break;
+ case 1:
+ //falling edge level triggered:0x4, low level:0xc, rising edge:0x2
+ printk("%s:%s[%d] %08X \n", __FILE__, __func__, __LINE__, dev->irq);
+ writel(readl(DANUBE_EBU_PCC_CON) | 0xc, DANUBE_EBU_PCC_CON);
+ writel(readl(DANUBE_EBU_PCC_IEN) | 0x10, DANUBE_EBU_PCC_IEN);
+ break;
+ case 2:
+ case 3:
+ case 4:
+ printk ("WARNING: interrupt pin %d not supported yet!\n", pin);
+ default:
+ printk ("WARNING: invalid interrupt pin %d\n", pin);
+ return 1;
+ }
+
+ return 0;
+}
+
+static void __init danube_pci_startup (void){
+ /*initialize the first PCI device--danube itself */
+ u32 temp_buffer;
+ /*TODO: trigger reset */
+ writel(readl(DANUBE_CGU_IFCCR) & ~0xf00000, DANUBE_CGU_IFCCR);
+ writel(readl(DANUBE_CGU_IFCCR) | 0x800000, DANUBE_CGU_IFCCR);
+ /* PCIS of IF_CLK of CGU : 1 =>PCI Clock output
+ 0 =>clock input
+ PADsel of PCI_CR of CGU : 1 =>From CGU
+ : 0 =>From pad
+ */
+ writel(readl(DANUBE_CGU_IFCCR) | (1 << 16), DANUBE_CGU_IFCCR);
+ writel((1 << 31) | (1 << 30), DANUBE_CGU_PCICR);
+
+ /* prepare GPIO */
+ /* PCI_RST: P1.5 ALT 01 */
+ //pliu20060613: start
+ writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
+ writel(readl(DANUBE_GPIO_P1_OD) | (1 << 5), DANUBE_GPIO_P1_OD);
+ writel(readl(DANUBE_GPIO_P1_DIR) | (1 << 5), DANUBE_GPIO_P1_DIR);
+ writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL1);
+ writel(readl(DANUBE_GPIO_P1_ALTSEL0) & ~(1 << 5), DANUBE_GPIO_P1_ALTSEL0);
+ //pliu20060613: end
+ /* PCI_REQ1: P1.13 ALT 01 */
+ /* PCI_GNT1: P1.14 ALT 01 */
+ writel(readl(DANUBE_GPIO_P1_DIR) & ~0x2000, DANUBE_GPIO_P1_DIR);
+ writel(readl(DANUBE_GPIO_P1_DIR) | 0x4000, DANUBE_GPIO_P1_DIR);
+ writel(readl(DANUBE_GPIO_P1_ALTSEL1) & ~0x6000, DANUBE_GPIO_P1_ALTSEL1);
+ writel(readl(DANUBE_GPIO_P1_ALTSEL0) | 0x6000, DANUBE_GPIO_P1_ALTSEL0);
+ /* PCI_REQ2: P1.15 ALT 10 */
+ /* PCI_GNT2: P1.7 ALT 10 */
+
+
+ /* enable auto-switching between PCI and EBU */
+ writel(0xa, PCI_CR_CLK_CTRL);
+ /* busy, i.e. configuration is not done, PCI access has to be retried */
+ writel(readl(PCI_CR_PCI_MOD) & ~(1 << 24), PCI_CR_PCI_MOD);
+ wmb ();
+ /* BUS Master/IO/MEM access */
+ writel(readl(PCI_CS_STS_CMD) | 7, PCI_CS_STS_CMD);
+
+ temp_buffer = readl(PCI_CR_PC_ARB);
+ /* enable external 2 PCI masters */
+ temp_buffer &= (~(0xf << 16));
+ /* enable internal arbiter */
+ temp_buffer |= (1 << INTERNAL_ARB_ENABLE_BIT);
+ /* enable internal PCI master reqest */
+ temp_buffer &= (~(3 << PCI_MASTER0_REQ_MASK_2BITS));
+
+ /* enable EBU reqest */
+ temp_buffer &= (~(3 << PCI_MASTER1_REQ_MASK_2BITS));
+
+ /* enable all external masters request */
+ temp_buffer &= (~(3 << PCI_MASTER2_REQ_MASK_2BITS));
+ writel(temp_buffer, PCI_CR_PC_ARB);
+
+ wmb ();
+
+ /* FPI ==> PCI MEM address mapping */
+ /* base: 0xb8000000 == > 0x18000000 */
+ /* size: 8x4M = 32M */
+ writel(0x18000000, PCI_CR_FCI_ADDR_MAP0);
+ writel(0x18400000, PCI_CR_FCI_ADDR_MAP1);
+ writel(0x18800000, PCI_CR_FCI_ADDR_MAP2);
+ writel(0x18c00000, PCI_CR_FCI_ADDR_MAP3);
+ writel(0x19000000, PCI_CR_FCI_ADDR_MAP4);
+ writel(0x19400000, PCI_CR_FCI_ADDR_MAP5);
+ writel(0x19800000, PCI_CR_FCI_ADDR_MAP6);
+ writel(0x19c00000, PCI_CR_FCI_ADDR_MAP7);
+
+ /* FPI ==> PCI IO address mapping */
+ /* base: 0xbAE00000 == > 0xbAE00000 */
+ /* size: 2M */
+ writel(0xbae00000, PCI_CR_FCI_ADDR_MAP11hg);
+
+ /* PCI ==> FPI address mapping */
+ /* base: 0x0 ==> 0x0 */
+ /* size: 32M */
+ /* BAR1 32M map to SDR address */
+ writel(0x0e000008, PCI_CR_BAR11MASK);
+ writel(0, PCI_CR_PCI_ADDR_MAP11);
+ writel(0, PCI_CS_BASE_ADDR1);
+#ifdef CONFIG_DANUBE_PCI_HW_SWAP
+ /* both TX and RX endian swap are enabled */
+ DANUBE_PCI_REG32 (PCI_CR_PCI_EOI_REG) |= 3;
+ wmb ();
+#endif
+ /*TODO: disable BAR2 & BAR3 - why was this in the origianl infineon code */
+ writel(readl(PCI_CR_BAR12MASK) | 0x80000000, PCI_CR_BAR12MASK);
+ writel(readl(PCI_CR_BAR13MASK) | 0x80000000, PCI_CR_BAR13MASK);
+ /*use 8 dw burse length */
+ writel(0x303, PCI_CR_FCI_BURST_LENGTH);
+
+ writel(readl(PCI_CR_PCI_MOD) | (1 << 24), PCI_CR_PCI_MOD);
+ wmb();
+ writel(readl(DANUBE_GPIO_P1_OUT) & ~(1 << 5), DANUBE_GPIO_P1_OUT);
+ wmb();
+ mdelay (1);
+ writel(readl(DANUBE_GPIO_P1_OUT) | (1 << 5), DANUBE_GPIO_P1_OUT);
+}
+
+int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin){
+ printk("\n\n\n%s:%s[%d] %d %d\n", __FILE__, __func__, __LINE__, slot, pin);
+ switch (slot) {
+ case 13:
+ /* IDSEL = AD29 --> USB Host Controller */
+ return (INT_NUM_IM1_IRL0 + 17);
+ case 14:
+ /* IDSEL = AD30 --> mini PCI connector */
+ //return (INT_NUM_IM1_IRL0 + 14);
+ return (INT_NUM_IM0_IRL0 + 22);
+ default:
+ printk("Warning: no IRQ found for PCI device in slot %d, pin %d\n", slot, pin);
+ return 0;
+ }
+}
+
+int pcibios_init(void){
+ extern int pci_probe_only;
+
+ pci_probe_only = 0;
+ printk ("PCI: Probing PCI hardware on host bus 0.\n");
+
+ danube_pci_startup ();
+
+ // DANUBE_PCI_REG32(PCI_CR_CLK_CTRL_REG) &= (~8);
+ danube_pci_mapped_cfg = ioremap_nocache(0x17000000, 0x800 * 16);
+ printk("Danube PCI mapped to 0x%08X\n", (unsigned long)danube_pci_mapped_cfg);
+
+ danube_pci_controller.io_map_base = (unsigned long)ioremap(DANUBE_PCI_IO_BASE, DANUBE_PCI_IO_SIZE - 1);
+
+ printk("Danube PCI I/O mapped to 0x%08X\n", (unsigned long)danube_pci_controller.io_map_base);
+
+ register_pci_controller(&danube_pci_controller);
+
+ return 0;
+}
+
+arch_initcall(pcibios_init);
--- /dev/null
+/*
+ * arch/mips/danube/pmu.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <asm/danube/danube.h>
+
+void
+danube_pmu_enable (unsigned int module)
+{
+ int err = 1000000;
+
+ writel(readl(DANUBE_PMU_PWDCR) & ~module, DANUBE_PMU_PWDCR);
+ while (--err && (readl(DANUBE_PMU_PWDSR) & module)) {}
+
+ if (!err)
+ panic("activating PMU module failed!");
+}
+EXPORT_SYMBOL(danube_pmu_enable);
+
+void
+danube_pmu_disable (unsigned int module)
+{
+ writel(readl(DANUBE_PMU_PWDCR) | module, DANUBE_PMU_PWDCR);
+}
+EXPORT_SYMBOL(danube_pmu_disable);
--- /dev/null
+/*
+ * arch/mips/danube/prom.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 Wu Qi Ming infineon
+ *
+ * Rewrite of Infineon Danube code, thanks to infineon for the support,
+ * software and hardware
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/bootmem.h>
+#include <asm/bootinfo.h>
+#include <asm/danube/danube.h>
+
+static char buf[1024];
+
+void
+prom_free_prom_memory (void)
+{
+}
+
+const char *
+get_system_type (void)
+{
+ return BOARD_SYSTEM_TYPE;
+}
+
+void
+prom_putchar (char c)
+{
+ while ((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK) >> ASCFSTAT_TXFFLOFF);
+
+ if (c == '\n')
+ writel('\r', DANUBE_ASC1_TBUF);
+ writel(c, DANUBE_ASC1_TBUF);
+}
+
+void
+prom_printf (const char * fmt, ...)
+{
+ va_list args;
+ int l;
+ char *p, *buf_end;
+
+ va_start(args, fmt);
+ l = vsprintf(buf, fmt, args);
+ va_end(args);
+ buf_end = buf + l;
+
+ for (p = buf; p < buf_end; p++)
+ {
+ prom_putchar(*p);
+ }
+}
+
+void __init
+prom_init(void)
+{
+ mips_machgroup = MACH_GROUP_DANUBE;
+ mips_machtype = MACH_INFINEON_DANUBE;
+
+ strcpy(&(arcs_cmdline[0]), "console=ttyS0,115200 rootfstype=squashfs,jffs2 init=/etc/preinit");
+ add_memory_region (0x00000000, 0x2000000, BOOT_MEM_RAM);
+}
--- /dev/null
+/*
+ * arch/mips/danube/prom.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ *
+ * Rewrite of Infineon Danube code, thanks to infineon for the support,
+ * software and hardware
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/pm.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/danube/danube.h>
+
+static void
+danube_machine_restart (char *command)
+{
+ printk (KERN_NOTICE "System restart\n");
+ local_irq_disable ();
+
+ writel(readl(DANUBE_RCU_REQ) | DANUBE_RST_ALL, DANUBE_RCU_REQ);
+ for (;;);
+}
+
+static void
+danube_machine_halt (void)
+{
+ printk (KERN_NOTICE "System halted.\n");
+ local_irq_disable ();
+ for (;;);
+}
+
+static void
+danube_machine_power_off (void)
+{
+ printk (KERN_NOTICE "Please turn off the power now.\n");
+ local_irq_disable ();
+ for (;;);
+}
+
+void
+danube_reboot_setup (void)
+{
+ _machine_restart = danube_machine_restart;
+ _machine_halt = danube_machine_halt;
+ pm_power_off = danube_machine_power_off;
+}
--- /dev/null
+/*
+ * arch/mips/danube/setup.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2004 peng.liu@infineon.com
+ *
+ * Rewrite of Infineon Danube code, thanks to infineon for the support,
+ * software and hardware
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/init.h>
+
+#include <asm/time.h>
+#include <asm/traps.h>
+#include <asm/cpu.h>
+#include <asm/irq.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/danube/danube_pmu.h>
+
+static unsigned int r4k_offset; /* Amount to increment compare reg each time */
+static unsigned int r4k_cur; /* What counter should be at next timer irq */
+
+extern void danube_reboot_setup (void);
+void prom_printf (const char * fmt, ...);
+
+void
+__init bus_error_init (void)
+{
+ /* nothing yet */
+}
+
+unsigned int
+danube_get_ddr_hz (void)
+{
+ switch (readl(DANUBE_CGU_SYS) & 0x3)
+ {
+ case 0:
+ return CLOCK_167M;
+ case 1:
+ return CLOCK_133M;
+ case 2:
+ return CLOCK_111M;
+ }
+ return CLOCK_83M;
+}
+EXPORT_SYMBOL(danube_get_ddr_hz);
+
+unsigned int
+danube_get_cpu_hz (void)
+{
+ unsigned int ddr_clock = danube_get_ddr_hz();
+ switch (readl(DANUBE_CGU_SYS) & 0xc)
+ {
+ case 0:
+ return CLOCK_333M;
+ case 4:
+ return ddr_clock;
+ }
+ return ddr_clock << 1;
+}
+EXPORT_SYMBOL(danube_get_cpu_hz);
+
+unsigned int
+danube_get_fpi_hz (void)
+{
+ unsigned int ddr_clock = danube_get_ddr_hz();
+ if (readl(DANUBE_CGU_SYS) & 0x40)
+ {
+ return ddr_clock >> 1;
+ }
+ return ddr_clock;
+}
+EXPORT_SYMBOL(danube_get_fpi_hz);
+
+unsigned int
+danube_get_cpu_ver (void)
+{
+ return readl(DANUBE_MCD_CHIPID) & 0xFFFFF000;
+}
+EXPORT_SYMBOL(danube_get_cpu_ver);
+
+void
+danube_time_init (void)
+{
+ mips_hpt_frequency = danube_get_cpu_hz() / 2;
+ r4k_offset = mips_hpt_frequency / HZ;
+ printk("mips_hpt_frequency:%d\n", mips_hpt_frequency);
+ printk("r4k_offset: %08x(%d)\n", r4k_offset, r4k_offset);
+}
+
+int
+danube_be_handler(struct pt_regs *regs, int is_fixup)
+{
+ /*TODO*/
+ printk(KERN_ERR "TODO: BUS error\n");
+
+ return MIPS_BE_FATAL;
+}
+
+/* ISR GPTU Timer 6 for high resolution timer */
+static irqreturn_t
+danube_timer6_interrupt(int irq, void *dev_id)
+{
+ timer_interrupt(DANUBE_TIMER6_INT, NULL);
+
+ return IRQ_HANDLED;
+}
+
+static struct irqaction hrt_irqaction = {
+ .handler = danube_timer6_interrupt,
+ .flags = IRQF_DISABLED,
+ .name = "hrt",
+};
+
+void __init
+plat_timer_setup (struct irqaction *irq)
+{
+ unsigned int retval;
+
+ setup_irq(MIPS_CPU_TIMER_IRQ, irq);
+
+ r4k_cur = (read_c0_count() + r4k_offset);
+ write_c0_compare(r4k_cur);
+
+ danube_pmu_enable(DANUBE_PMU_PWDCR_GPT | DANUBE_PMU_PWDCR_FPI);
+
+ writel(0x100, DANUBE_GPTU_GPT_CLC);
+
+ writel(0xffff, DANUBE_GPTU_GPT_CAPREL);
+ writel(0x80C0, DANUBE_GPTU_GPT_T6CON);
+
+ retval = setup_irq(DANUBE_TIMER6_INT, &hrt_irqaction);
+
+ if (retval)
+ {
+ prom_printf("reqeust_irq failed %d. HIGH_RES_TIMER is diabled\n", DANUBE_TIMER6_INT);
+ }
+}
+
+void __init
+plat_mem_setup (void)
+{
+ u32 status;
+ prom_printf("This %s has a cpu rev of 0x%X\n", BOARD_SYSTEM_TYPE, danube_get_cpu_ver());
+
+ //TODO WHY ???
+ /* clear RE bit*/
+ status = read_c0_status();
+ status &= (~(1<<25));
+ write_c0_status(status);
+
+ danube_reboot_setup();
+ board_time_init = danube_time_init;
+ board_be_handler = &danube_be_handler;
+
+ ioport_resource.start = IOPORT_RESOURCE_START;
+ ioport_resource.end = IOPORT_RESOURCE_END;
+ iomem_resource.start = IOMEM_RESOURCE_START;
+ iomem_resource.end = IOMEM_RESOURCE_END;
+}
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * This driver was originally based on the INCA-IP driver, but due to
+ * fundamental conceptual drawbacks there has been changed a lot.
+ *
+ * Based on INCA-IP driver Copyright (c) 2003 Gary Jennejohn <gj@denx.de>
+ * Based on the VxWorks drivers Copyright (c) 2002, Infineon Technologies.
+ *
+ * Copyright (C) 2006 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#define IFAP_EEPROM_DRV_VERSION "0.0.1"
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/danube/ifx_ssc_defines.h>
+#include <asm/danube/ifx_ssc.h>
+
+/* allow the user to set the major device number */
+static int danube_eeprom_maj = 0;
+
+extern int ifx_ssc_init (void);
+extern int ifx_ssc_open (struct inode *inode, struct file *filp);
+extern int ifx_ssc_close (struct inode *inode, struct file *filp);
+extern void ifx_ssc_cleanup_module (void);
+extern int ifx_ssc_ioctl (struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long data);
+extern ssize_t ifx_ssc_kwrite (int port, const char *kbuf, size_t len);
+extern ssize_t ifx_ssc_kread (int port, char *kbuf, size_t len);
+
+extern int ifx_ssc_cs_low (unsigned int pin);
+extern int ifx_ssc_cs_high (unsigned int pin);
+extern int ifx_ssc_txrx (char *tx_buf, unsigned int tx_len, char *rx_buf, unsigned int rx_len);
+extern int ifx_ssc_tx (char *tx_buf, unsigned int tx_len);
+extern int ifx_ssc_rx (char *rx_buf, unsigned int rx_len);
+
+#define EEPROM_CS IFX_SSC_WHBGPOSTAT_OUT0_POS
+
+/* commands for EEPROM, x25160, x25140 */
+#define EEPROM_WREN ((unsigned char)0x06)
+#define EEPROM_WRDI ((unsigned char)0x04)
+#define EEPROM_RDSR ((unsigned char)0x05)
+#define EEPROM_WRSR ((unsigned char)0x01)
+#define EEPROM_READ ((unsigned char)0x03)
+#define EEPROM_WRITE ((unsigned char)0x02)
+#define EEPROM_PAGE_SIZE 4
+#define EEPROM_SIZE 512
+
+static int
+eeprom_rdsr (void)
+{
+ int ret = 0;
+ unsigned char cmd = EEPROM_RDSR;
+ unsigned long flag;
+ char status;
+
+ local_irq_save(flag);
+
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0)
+ if ((ret = ifx_ssc_txrx(&cmd, 1, &status, 1)) >= 0)
+ ret = status & 1;
+
+ ifx_ssc_cs_high(EEPROM_CS);
+ local_irq_restore(flag);
+
+ return ret;
+}
+
+void
+eeprom_wip_over (void)
+{
+ while (eeprom_rdsr())
+ printk("waiting for eeprom\n");
+}
+
+static int
+eeprom_wren (void)
+{
+ unsigned char cmd = EEPROM_WREN;
+ int ret = 0;
+ unsigned long flag;
+
+ local_irq_save(flag);
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)) == 0)
+ if ((ret = ifx_ssc_tx(&cmd, 1)) >= 0)
+ ret = 0;
+
+ ifx_ssc_cs_high(EEPROM_CS);
+ local_irq_restore(flag);
+
+ if (!ret)
+ eeprom_wip_over();
+
+ return ret;
+}
+
+static int
+eeprom_wrsr (void)
+{
+ int ret = 0;
+ unsigned char cmd[2];
+ unsigned long flag;
+
+ cmd[0] = EEPROM_WRSR;
+ cmd[1] = 0;
+
+ if ((ret = eeprom_wren()))
+ {
+ printk ("eeprom_wren fails\n");
+ goto out1;
+ }
+
+ local_irq_save(flag);
+
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
+ goto out;
+
+ if ((ret = ifx_ssc_tx(cmd, 2)) < 0) {
+ ifx_ssc_cs_high(EEPROM_CS);
+ goto out;
+ }
+
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
+ goto out;
+
+ local_irq_restore(flag);
+ eeprom_wip_over();
+
+ return ret;
+
+out:
+ local_irq_restore (flag);
+ eeprom_wip_over ();
+
+out1:
+ return ret;
+}
+
+static int
+eeprom_read (unsigned int addr, unsigned char *buf, unsigned int len)
+{
+ int ret = 0;
+ unsigned char write_buf[2];
+ unsigned int eff = 0;
+ unsigned long flag;
+
+ while (1)
+ {
+ eeprom_wip_over();
+ eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE);
+ eff = (eff < len) ? eff : len;
+ local_irq_save(flag);
+
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)) < 0)
+ goto out;
+
+ write_buf[0] = EEPROM_READ | ((unsigned char) ((addr & 0x100) >> 5));
+ write_buf[1] = (addr & 0xff);
+
+ if ((ret = ifx_ssc_txrx (write_buf, 2, buf, eff)) != eff)
+ {
+ printk("ssc_txrx fails %d\n", ret);
+ ifx_ssc_cs_high (EEPROM_CS);
+ goto out;
+ }
+
+ buf += ret;
+ len -= ret;
+ addr += ret;
+
+ if ((ret = ifx_ssc_cs_high(EEPROM_CS)))
+ goto out;
+
+ local_irq_restore(flag);
+
+ if (len <= 0)
+ goto out2;
+ }
+
+out:
+ local_irq_restore (flag);
+out2:
+ return ret;
+}
+
+static int
+eeprom_write (unsigned int addr, unsigned char *buf, unsigned int len)
+{
+ int ret = 0;
+ unsigned int eff = 0;
+ unsigned char write_buf[2];
+ int i;
+ unsigned char rx_buf[EEPROM_PAGE_SIZE];
+
+ while (1)
+ {
+ eeprom_wip_over();
+
+ if ((ret = eeprom_wren()))
+ {
+ printk("eeprom_wren fails\n");
+ goto out;
+ }
+
+ write_buf[0] = EEPROM_WRITE | ((unsigned char) ((addr & 0x100) >> 5));
+ write_buf[1] = (addr & 0xff);
+
+ eff = EEPROM_PAGE_SIZE - (addr % EEPROM_PAGE_SIZE);
+ eff = (eff < len) ? eff : len;
+
+ printk("EEPROM Write:\n");
+ for (i = 0; i < eff; i++) {
+ printk("%2x ", buf[i]);
+ if ((i % 16) == 15)
+ printk("\n");
+ }
+ printk("\n");
+
+ if ((ret = ifx_ssc_cs_low(EEPROM_CS)))
+ goto out;
+
+ if ((ret = ifx_ssc_tx (write_buf, 2)) < 0)
+ {
+ printk("ssc_tx fails %d\n", ret);
+ ifx_ssc_cs_high(EEPROM_CS);
+ goto out;
+ }
+
+ if ((ret = ifx_ssc_tx (buf, eff)) != eff)
+ {
+ printk("ssc_tx fails %d\n", ret);
+ ifx_ssc_cs_high(EEPROM_CS);
+ goto out;
+ }
+
+ buf += ret;
+ len -= ret;
+ addr += ret;
+
+ if ((ret = ifx_ssc_cs_high (EEPROM_CS)))
+ goto out;
+
+ printk ("<==");
+ eeprom_read((addr - eff), rx_buf, eff);
+ for (i = 0; i < eff; i++)
+ {
+ printk ("[%x]", rx_buf[i]);
+ }
+ printk ("\n");
+
+ if (len <= 0)
+ break;
+ }
+
+out:
+ return ret;
+}
+
+int
+danube_eeprom_open (struct inode *inode, struct file *filp)
+{
+ filp->f_pos = 0;
+ return 0;
+}
+
+int
+danube_eeprom_close (struct inode *inode, struct file *filp)
+{
+ return 0;
+}
+
+int
+danube_eeprom_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data)
+{
+ return 0;
+}
+
+ssize_t
+danube_eeprom_read (char *buf, size_t len, unsigned int addr)
+{
+ int ret = 0;
+ unsigned int data;
+
+ printk("addr:=%d\n", addr);
+ printk("len:=%d\n", len);
+
+ if ((addr + len) > EEPROM_SIZE)
+ {
+ printk("invalid len\n");
+ addr = 0;
+ len = EEPROM_SIZE / 2;
+ }
+
+ if ((ret = ifx_ssc_open((struct inode *) 0, NULL)))
+ {
+ printk("danube_eeprom_open fails\n");
+ goto out;
+ }
+
+ data = (unsigned int)IFX_SSC_MODE_RXTX;
+
+ if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data)))
+ {
+ printk("set RXTX mode fails\n");
+ goto out;
+ }
+
+ if ((ret = eeprom_wrsr()))
+ {
+ printk("EEPROM reset fails\n");
+ goto out;
+ }
+
+ if ((ret = eeprom_read(addr, buf, len)))
+ {
+ printk("eeprom read fails\n");
+ goto out;
+ }
+
+out:
+ if (ifx_ssc_close((struct inode *) 0, NULL))
+ printk("danube_eeprom_close fails\n");
+
+ return len;
+}
+EXPORT_SYMBOL(danube_eeprom_read);
+
+static ssize_t
+danube_eeprom_fops_read (struct file *filp, char *ubuf, size_t len, loff_t * off)
+{
+ int ret = 0;
+ unsigned char ssc_rx_buf[EEPROM_SIZE];
+ long flag;
+
+ if (*off >= EEPROM_SIZE)
+ return 0;
+
+ if (*off + len > EEPROM_SIZE)
+ len = EEPROM_SIZE - *off;
+
+ if (len == 0)
+ return 0;
+
+ local_irq_save(flag);
+
+ if ((ret = danube_eeprom_read(ssc_rx_buf, len, *off)) < 0)
+ {
+ printk("read fails, err=%x\n", ret);
+ local_irq_restore(flag);
+ return ret;
+ }
+
+ if (copy_to_user((void*)ubuf, ssc_rx_buf, ret) != 0)
+ {
+ local_irq_restore(flag);
+ ret = -EFAULT;
+ }
+
+ local_irq_restore(flag);
+ *off += len;
+
+ return len;
+}
+
+ssize_t
+danube_eeprom_write (char *buf, size_t len, unsigned int addr)
+{
+ int ret = 0;
+ unsigned int data;
+
+ if ((ret = ifx_ssc_open ((struct inode *) 0, NULL)))
+ {
+ printk ("danube_eeprom_open fails\n");
+ goto out;
+ }
+
+ data = (unsigned int) IFX_SSC_MODE_RXTX;
+
+ if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_RXTX_MODE_SET, (unsigned long) &data)))
+ {
+ printk ("set RXTX mode fails\n");
+ goto out;
+ }
+
+ if ((ret = eeprom_wrsr ())) {
+ printk ("EEPROM reset fails\n");
+ goto out;
+ }
+
+ if ((ret = eeprom_write (addr, buf, len))) {
+ printk ("eeprom write fails\n");
+ goto out;
+ }
+
+out:
+ if (ifx_ssc_close ((struct inode *) 0, NULL))
+ printk ("danube_eeprom_close fails\n");
+
+ return ret;
+}
+EXPORT_SYMBOL(danube_eeprom_write);
+
+static ssize_t
+danube_eeprom_fops_write (struct file *filp, const char *ubuf, size_t len, loff_t * off)
+{
+ int ret = 0;
+ unsigned char ssc_tx_buf[EEPROM_SIZE];
+
+ if (*off >= EEPROM_SIZE)
+ return 0;
+
+ if (len + *off > EEPROM_SIZE)
+ len = EEPROM_SIZE - *off;
+
+ if ((ret = copy_from_user (ssc_tx_buf, ubuf, len)))
+ return EFAULT;
+
+ ret = danube_eeprom_write (ssc_tx_buf, len, *off);
+
+ if (ret > 0)
+ *off = ret;
+
+ return ret;
+}
+
+loff_t
+danube_eeprom_llseek (struct file * filp, loff_t off, int whence)
+{
+ loff_t newpos;
+ switch (whence) {
+ case SEEK_SET:
+ newpos = off;
+ break;
+
+ case SEEK_CUR:
+ newpos = filp->f_pos + off;
+ break;
+
+ default:
+ return -EINVAL;
+ }
+
+ if (newpos < 0)
+ return -EINVAL;
+
+ filp->f_pos = newpos;
+
+ return newpos;
+}
+
+static struct file_operations danube_eeprom_fops = {
+ owner:THIS_MODULE,
+ llseek:danube_eeprom_llseek,
+ read:danube_eeprom_fops_read,
+ write:danube_eeprom_fops_write,
+ ioctl:danube_eeprom_ioctl,
+ open:danube_eeprom_open,
+ release:danube_eeprom_close,
+};
+
+int __init
+danube_eeprom_init (void)
+{
+ int ret = 0;
+
+ danube_eeprom_maj = register_chrdev(0, "eeprom", &danube_eeprom_fops);
+
+ if (danube_eeprom_maj < 0)
+ {
+ printk("failed to register eeprom device\n");
+ ret = -EINVAL;
+
+ goto out;
+ }
+
+ printk("danube_eeprom : /dev/eeprom mayor %d\n", danube_eeprom_maj);
+
+out:
+ return ret;
+}
+
+void __exit
+danube_eeprom_cleanup_module (void)
+{
+ /*if (unregister_chrdev (danube_eeprom_maj, "eeprom")) {
+ printk ("Unable to unregister major %d for the EEPROM\n",
+ maj);
+ }*/
+}
+
+module_exit (danube_eeprom_cleanup_module);
+module_init (danube_eeprom_init);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("Peng Liu");
+MODULE_DESCRIPTION ("IFAP EEPROM driver");
+MODULE_SUPPORTED_DEVICE ("danube_eeprom");
+
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/init.h>
+#include <linux/ioctl.h>
+#include <asm/semaphore.h>
+#include <asm/uaccess.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_ioctl.h>
+
+#define MAX_PORTS 2
+#define PINS_PER_PORT 16
+
+static unsigned int danube_gpio_major = 0;
+
+/* TODO do we need this ? */
+static struct semaphore port_sem;
+
+/* TODO do we really need this ? return in a define is forbidden by coding style */
+#define DANUBE_GPIO_SANITY {if (port > MAX_PORTS || pin > PINS_PER_PORT) return -EINVAL; }
+
+int
+danube_port_reserve_pin (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ printk("%s : call to obseleted function\n", __func__);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_reserve_pin);
+
+int
+danube_port_free_pin (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ printk("%s : call to obseleted function\n", __func__);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_free_pin);
+
+int
+danube_port_set_open_drain (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OD);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_open_drain);
+
+int
+danube_port_clear_open_drain (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_OD + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OD);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_open_drain);
+
+int
+danube_port_set_pudsel (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDSEL);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_pudsel);
+
+int
+danube_port_clear_pudsel (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_PUDSEL + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDSEL);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_pudsel);
+
+int
+danube_port_set_puden (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_PUDEN);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_puden);
+
+int
+danube_port_clear_puden (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_PUDEN + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_PUDEN);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_puden);
+
+int
+danube_port_set_stoff (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_STOFF);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_stoff);
+
+int
+danube_port_clear_stoff (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_STOFF + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_STOFF);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_stoff);
+
+int
+danube_port_set_dir_out (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_DIR);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_dir_out);
+
+int
+danube_port_set_dir_in (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_DIR + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_DIR);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_dir_in);
+
+int
+danube_port_set_output (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_OUT);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_output);
+
+int
+danube_port_clear_output (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_OUT + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_OUT);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_output);
+
+int
+danube_port_get_input (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+
+ if (readl(DANUBE_GPIO_P0_IN + (port * 0x30)) & (1 << pin))
+ return 0;
+ else
+ return 1;
+}
+EXPORT_SYMBOL(danube_port_get_input);
+
+int
+danube_port_set_altsel0 (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL0);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_altsel0);
+
+int
+danube_port_clear_altsel0 (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_ALTSEL0 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL0);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_altsel0);
+
+int
+danube_port_set_altsel1 (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) | (1 << pin), DANUBE_GPIO_P0_ALTSEL1);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_set_altsel1);
+
+int
+danube_port_clear_altsel1 (unsigned int port, unsigned int pin)
+{
+ DANUBE_GPIO_SANITY;
+ writel(readl(DANUBE_GPIO_P0_ALTSEL1 + (port * 0x30)) & ~(1 << pin), DANUBE_GPIO_P0_ALTSEL1);
+
+ return 0;
+}
+EXPORT_SYMBOL(danube_port_clear_altsel1);
+
+long danube_port_read_procmem_helper(char* tag, u32* in_reg, char *buf)
+{
+ u32 reg, bit = 0;
+ unsigned int len, t;
+
+ len = sprintf(buf, "\n%s: ", tag);
+ reg = readl(in_reg);
+ bit = 0x80000000;
+ for (t = 0; t < 32; t++) {
+ if ((reg & bit) > 0)
+ len = len + sprintf(buf + len, "X");
+ else
+ len = len + sprintf(buf + len, " ");
+ bit = bit >> 1;
+ }
+
+ return len;
+}
+
+int
+danube_port_read_procmem (char *buf, char **start, off_t offset, int count,
+ int *eof, void *data)
+{
+ long len = sprintf (buf, "\nDanube Port Settings\n");
+
+ len += sprintf (buf + len,
+ " 3 2 1 0\n");
+ len += sprintf (buf + len,
+ " 10987654321098765432109876543210\n");
+ len += sprintf (buf + len,
+ "----------------------------------------\n");
+
+ len += danube_port_read_procmem_helper("P0-OUT", DANUBE_GPIO_P0_OUT, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-OUT", DANUBE_GPIO_P1_OUT, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-IN ", DANUBE_GPIO_P0_IN, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-IN ", DANUBE_GPIO_P1_IN, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-DIR", DANUBE_GPIO_P0_DIR, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-DIR", DANUBE_GPIO_P1_DIR, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-STO ", DANUBE_GPIO_P0_STOFF, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-STO ", DANUBE_GPIO_P1_STOFF, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-PUDE", DANUBE_GPIO_P0_PUDEN, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-PUDE", DANUBE_GPIO_P1_PUDEN, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-OD ", DANUBE_GPIO_P0_OD, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-OD ", DANUBE_GPIO_P1_OD, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-PUDS", DANUBE_GPIO_P0_PUDSEL, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-PUDS", DANUBE_GPIO_P1_PUDSEL, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-ALT0", DANUBE_GPIO_P0_ALTSEL0, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-ALT0", DANUBE_GPIO_P1_ALTSEL0, &buf[len]);
+ len += danube_port_read_procmem_helper("P0-ALT1", DANUBE_GPIO_P0_ALTSEL1, &buf[len]);
+ len += danube_port_read_procmem_helper("P1-ALT1", DANUBE_GPIO_P1_ALTSEL1, &buf[len]);
+ len = len + sprintf (buf + len, "\n\n");
+
+ *eof = 1;
+
+ return len;
+}
+
+static int
+danube_port_open (struct inode *inode, struct file *filep)
+{
+ return 0;
+}
+
+static int
+danube_port_release (struct inode *inode, struct file *filelp)
+{
+ return 0;
+}
+
+static int
+danube_port_ioctl (struct inode *inode, struct file *filp,
+ unsigned int cmd, unsigned long arg)
+{
+ int ret = 0;
+ volatile struct danube_port_ioctl_parm parm;
+
+ if (_IOC_TYPE (cmd) != DANUBE_PORT_IOC_MAGIC)
+ return -EINVAL;
+
+ if (_IOC_DIR (cmd) & _IOC_WRITE) {
+ if (!access_ok
+ (VERIFY_READ, arg,
+ sizeof (struct danube_port_ioctl_parm)))
+ return -EFAULT;
+ ret = copy_from_user ((void *) &parm, (void *) arg,
+ sizeof (struct danube_port_ioctl_parm));
+ }
+ if (_IOC_DIR (cmd) & _IOC_READ) {
+ if (!access_ok
+ (VERIFY_WRITE, arg,
+ sizeof (struct danube_port_ioctl_parm)))
+ return -EFAULT;
+ }
+
+ if (down_trylock (&port_sem) != 0)
+ return -EBUSY;
+
+ switch (cmd) {
+ case DANUBE_PORT_IOCOD:
+ if (parm.value == 0x00)
+ danube_port_clear_open_drain(parm.port, parm.pin);
+ else
+ danube_port_set_open_drain(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCPUDSEL:
+ if (parm.value == 0x00)
+ danube_port_clear_pudsel(parm.port, parm.pin);
+ else
+ danube_port_set_pudsel(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCPUDEN:
+ if (parm.value == 0x00)
+ danube_port_clear_puden(parm.port, parm.pin);
+ else
+ danube_port_set_puden(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCSTOFF:
+ if (parm.value == 0x00)
+ danube_port_clear_stoff(parm.port, parm.pin);
+ else
+ danube_port_set_stoff(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCDIR:
+ if (parm.value == 0x00)
+ danube_port_set_dir_in(parm.port, parm.pin);
+ else
+ danube_port_set_dir_out(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCOUTPUT:
+ if (parm.value == 0x00)
+ danube_port_clear_output(parm.port, parm.pin);
+ else
+ danube_port_set_output(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCALTSEL0:
+ if (parm.value == 0x00)
+ danube_port_clear_altsel0(parm.port, parm.pin);
+ else
+ danube_port_set_altsel0(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCALTSEL1:
+ if (parm.value == 0x00)
+ danube_port_clear_altsel1(parm.port, parm.pin);
+ else
+ danube_port_set_altsel1(parm.port, parm.pin);
+ break;
+
+ case DANUBE_PORT_IOCINPUT:
+ parm.value = danube_port_get_input(parm.port, parm.pin);
+ copy_to_user((void*)arg, (void*)&parm,
+ sizeof(struct danube_port_ioctl_parm));
+ break;
+
+ default:
+ ret = -EINVAL;
+ }
+
+ up (&port_sem);
+
+ return ret;
+}
+
+static struct file_operations port_fops = {
+ .open = danube_port_open,
+ .release = danube_port_release,
+ .ioctl = danube_port_ioctl
+};
+
+int __init
+danube_gpio_init (void)
+{
+ int retval = 0;
+
+ sema_init (&port_sem, 1);
+
+ danube_gpio_major = register_chrdev(0, "danube_gpio", &port_fops);
+ if (!danube_gpio_major)
+ {
+ printk("danube-port: Error! Could not register port device. #%d\n", danube_gpio_major);
+ retval = -EINVAL;
+ goto out;
+ }
+
+ create_proc_read_entry("danube_gpio", 0, NULL,
+ danube_port_read_procmem, NULL);
+
+ printk("registered danube gpio driver\n");
+
+out:
+ return retval;
+}
+
+void __exit
+danube_gpio_exit (void)
+{
+ unregister_chrdev(danube_gpio_major, "danube_gpio");
+ remove_proc_entry("danube_gpio", NULL);
+}
+
+module_init(danube_gpio_init);
+module_exit(danube_gpio_exit);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2006 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/version.h>
+#include <linux/types.h>
+#include <linux/fs.h>
+#include <linux/init.h>
+#include <asm/uaccess.h>
+#include <asm/unistd.h>
+#include <linux/errno.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_gpio.h>
+#include <asm/danube/danube_pmu.h>
+
+#define DANUBE_LED_CLK_EDGE DANUBE_LED_FALLING
+//#define DANUBE_LED_CLK_EDGE DANUBE_LED_RISING
+
+#define DANUBE_LED_SPEED DANUBE_LED_8HZ
+
+#define DANUBE_LED_GPIO_PORT 0
+
+static int danube_led_major;
+
+void
+danube_led_set (unsigned int led)
+{
+ led &= 0xffffff;
+ writel(readl(DANUBE_LED_CPU0) | led, DANUBE_LED_CPU0);
+}
+EXPORT_SYMBOL(danube_led_set);
+
+void
+danube_led_clear (unsigned int led)
+{
+ led = ~(led & 0xffffff);
+ writel(readl(DANUBE_LED_CPU0) & led, DANUBE_LED_CPU0);
+}
+EXPORT_SYMBOL(danube_led_clear);
+
+void
+danube_led_blink_set (unsigned int led)
+{
+ led &= 0xffffff;
+ writel(readl(DANUBE_LED_CON0) | led, DANUBE_LED_CON0);
+}
+EXPORT_SYMBOL(danube_led_blink_set);
+
+void
+danube_led_blink_clear (unsigned int led)
+{
+ led = ~(led & 0xffffff);
+ writel(readl(DANUBE_LED_CON0) & led, DANUBE_LED_CON0);
+}
+EXPORT_SYMBOL(danube_led_blink_clear);
+
+void
+danube_led_setup_gpio (void)
+{
+ int i = 0;
+
+ /* we need to setup pins SH,D,ST (4,5,6) */
+ for (i = 4; i < 7; i++)
+ {
+ danube_port_set_altsel0(DANUBE_LED_GPIO_PORT, i);
+ danube_port_clear_altsel1(DANUBE_LED_GPIO_PORT, i);
+ danube_port_set_dir_out(DANUBE_LED_GPIO_PORT, i);
+ danube_port_set_open_drain(DANUBE_LED_GPIO_PORT, i);
+ }
+}
+
+static int
+led_ioctl (struct inode *inode, struct file *file, unsigned int cmd, unsigned long arg)
+{
+ int ret = -EINVAL;
+
+ switch ( cmd )
+ {
+ }
+
+ return ret;
+}
+
+static int
+led_open (struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static int
+led_release (struct inode *inode, struct file *file)
+{
+ return 0;
+}
+
+static struct file_operations danube_led_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = led_ioctl,
+ .open = led_open,
+ .release = led_release
+};
+
+
+/*
+Map for LED on reference board
+ WLAN_READ LED11 OUT1 15
+ WARNING LED12 OUT2 14
+ FXS1_LINK LED13 OUT3 13
+ FXS2_LINK LED14 OUT4 12
+ FXO_ACT LED15 OUT5 11
+ USB_LINK LED16 OUT6 10
+ ADSL2_LINK LED19 OUT7 9
+ BT_LINK LED17 OUT8 8
+ SD_LINK LED20 OUT9 7
+ ADSL2_TRAFFIC LED31 OUT16 0
+Map for hardware relay on reference board
+ USB Power On OUT11 5
+ RELAY OUT12 4
+*/
+
+
+int __init
+danube_led_init (void)
+{
+ int ret = 0;
+
+ danube_led_setup_gpio();
+
+ writel(0, DANUBE_LED_AR);
+ writel(0, DANUBE_LED_CPU0);
+ writel(0, DANUBE_LED_CPU1);
+ writel(LED_CON0_SWU, DANUBE_LED_CON0);
+ writel(0, DANUBE_LED_CON1);
+
+ /* setup the clock edge that the shift register is triggered on */
+ writel(readl(DANUBE_LED_CON0) & ~DANUBE_LED_EDGE_MASK, DANUBE_LED_CON0);
+ writel(readl(DANUBE_LED_CON0) | DANUBE_LED_CLK_EDGE, DANUBE_LED_CON0);
+
+ /* per default leds 15-0 are set */
+ writel(DANUBE_LED_GROUP1 | DANUBE_LED_GROUP0, DANUBE_LED_CON1);
+
+ /* leds are update periodically by the FPID */
+ writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_UPD_MASK, DANUBE_LED_CON1);
+ writel(readl(DANUBE_LED_CON1) | DANUBE_LED_UPD_SRC_FPI, DANUBE_LED_CON1);
+
+ /* set led update speed */
+ writel(readl(DANUBE_LED_CON1) & ~DANUBE_LED_MASK, DANUBE_LED_CON1);
+ writel(readl(DANUBE_LED_CON1) | DANUBE_LED_SPEED, DANUBE_LED_CON1);
+
+ /* adsl 0 and 1 leds are updated by the arc */
+ writel(readl(DANUBE_LED_CON0) | DANUBE_LED_ADSL_SRC, DANUBE_LED_CON0);
+
+ /* per default, the leds are turned on */
+ danube_pmu_enable(DANUBE_PMU_PWDCR_LED);
+
+ danube_led_major = register_chrdev(0, "danube_led", &danube_led_fops);
+
+ if (!danube_led_major)
+ {
+ printk("danube_led: Error! Could not register device. %d\n", danube_led_major);
+ ret = -EINVAL;
+
+ goto out;
+ }
+
+ printk(KERN_INFO "danube_led : device registered on major %d\n", danube_led_major);
+
+out:
+ return ret;
+}
+
+void __exit
+danube_led_exit (void)
+{
+ unregister_chrdev(danube_led_major, "danube_led");
+}
+
+module_init(danube_led_init);
+module_exit(danube_led_exit);
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2006 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+// ### TO DO: general issues:
+// - power management
+// - interrupt handling (direct/indirect)
+// - pin/mux-handling (just overall concept due to project dependency)
+// - multiple instances capability
+// - slave functionality
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/timer.h>
+#include <linux/interrupt.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fs.h>
+#include <linux/proc_fs.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/mm.h>
+#include <linux/ioport.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/spinlock.h>
+#include <linux/slab.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/danube/ifx_ssc_defines.h>
+#include <asm/danube/ifx_ssc.h>
+
+#ifdef SSC_FRAME_INT_ENABLE
+#undef SSC_FRAME_INT_ENABLE
+#endif
+
+#define not_yet
+
+#define SPI_VINETIC
+
+
+
+/* allow the user to set the major device number */
+static int maj = 0;
+
+/*
+ * This is the per-channel data structure containing pointers, flags
+ * and variables for the port. This driver supports a maximum of PORT_CNT.
+ * isp is allocated in ifx_ssc_init() based on the chip version.
+ */
+static struct ifx_ssc_port *isp;
+
+/* prototypes for fops */
+static ssize_t ifx_ssc_read (struct file *, char *, size_t, loff_t *);
+static ssize_t ifx_ssc_write (struct file *, const char *, size_t, loff_t *);
+//static unsigned int ifx_ssc_poll(struct file *, struct poll_table_struct *);
+int ifx_ssc_ioctl (struct inode *, struct file *, unsigned int,
+ unsigned long);
+int ifx_ssc_open (struct inode *, struct file *);
+int ifx_ssc_close (struct inode *, struct file *);
+
+/* other forward declarations */
+static unsigned int ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info);
+static void tx_int (struct ifx_ssc_port *);
+static int ifx_ssc1_read_proc (char *, char **, off_t, int, int *, void *);
+
+extern unsigned int danube_get_fpi_hz (void);
+extern void mask_and_ack_danube_irq (unsigned int irq_nr);
+
+static struct file_operations ifx_ssc_fops = {
+ .owner = THIS_MODULE,
+ .read = ifx_ssc_read,
+ .write = ifx_ssc_write,
+ .ioctl = ifx_ssc_ioctl,
+ .open = ifx_ssc_open,
+ .release = ifx_ssc_close,
+};
+
+static inline unsigned int
+ifx_ssc_get_kernel_clk (struct ifx_ssc_port *info)
+{
+ unsigned int rmc;
+
+ rmc = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CLC) & IFX_CLC_RUN_DIVIDER_MASK) >> IFX_CLC_RUN_DIVIDER_OFFSET;
+ if (rmc == 0)
+ {
+ printk ("ifx_ssc_get_kernel_clk rmc==0 \n");
+ return 0;
+ }
+ return danube_get_fpi_hz () / rmc;
+}
+
+#ifndef not_yet
+#ifdef IFX_SSC_INT_USE_BH
+/*
+ * This routine is used by the interrupt handler to schedule
+ * processing in the software interrupt portion of the driver
+ * (also known as the "bottom half"). This can be called any
+ * number of times for any channel without harm.
+ */
+static inline void
+ifx_ssc_sched_event (struct ifx_ssc_port *info, int event)
+{
+ info->event |= 1 << event; /* remember what kind of event and who */
+ queue_task (&info->tqueue, &tq_cyclades); /* it belongs to */
+ mark_bh (CYCLADES_BH); /* then trigger event */
+}
+
+static void
+do_softint (void *private_)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *) private_;
+
+ if (test_and_clear_bit (Cy_EVENT_HANGUP, &info->event))
+ {
+ wake_up_interruptible (&info->open_wait);
+ info->flags &= ~(ASYNC_NORMAL_ACTIVE | ASYNC_CALLOUT_ACTIVE);
+ }
+
+ if (test_and_clear_bit (Cy_EVENT_OPEN_WAKEUP, &info->event))
+ wake_up_interruptible (&info->open_wait);
+
+ if (test_and_clear_bit (Cy_EVENT_DELTA_WAKEUP, &info->event))
+ wake_up_interruptible (&info->delta_msr_wait);
+
+ if (test_and_clear_bit (Cy_EVENT_WRITE_WAKEUP, &info->event))
+ wake_up_interruptible (&tty->write_wait);
+#ifdef Z_WAKE
+ if (test_and_clear_bit (Cy_EVENT_SHUTDOWN_WAKEUP, &info->event))
+ wake_up_interruptible (&info->shutdown_wait);
+#endif
+}
+#endif
+#endif
+
+inline static void
+rx_int (struct ifx_ssc_port *info)
+{
+ int fifo_fill_lev, bytes_in_buf, i;
+ unsigned long tmp_val;
+ unsigned long *tmp_ptr;
+ unsigned int rx_valid_cnt;
+ /* number of words waiting in the RX FIFO */
+ fifo_fill_lev = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_RECEIVED_WORDS_MASK) >> IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET;
+ // Note: There are always 32 bits in a fifo-entry except for the last
+ // word of a contigous transfer block and except for not in rx-only
+ // mode and CON.ENBV set. But for this case it should be a convention
+ // in software which helps:
+ // In tx or rx/tx mode all transfers from the buffer to the FIFO are
+ // 32-bit wide, except for the last three bytes, which could be a
+ // combination of 16- and 8-bit access.
+ // => The whole block is received as 32-bit words as a contigous stream,
+ // even if there was a gap in tx which has the fifo run out of data!
+ // Just the last fifo entry *may* be partially filled (0, 1, 2 or 3 bytes)!
+
+ /* free space in the RX buffer */
+ bytes_in_buf = info->rxbuf_end - info->rxbuf_ptr;
+ // transfer with 32 bits per entry
+ while ((bytes_in_buf >= 4) && (fifo_fill_lev > 0)) {
+ tmp_ptr = (unsigned long *) info->rxbuf_ptr;
+ *tmp_ptr = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB);
+ info->rxbuf_ptr += 4;
+ info->stats.rxBytes += 4;
+ fifo_fill_lev--;
+ bytes_in_buf -= 4;
+ }
+
+ // now do the rest as mentioned in STATE.RXBV
+ while ((bytes_in_buf > 0) && (fifo_fill_lev > 0)) {
+ rx_valid_cnt = (READ_PERIPHERAL_REGISTER(info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET;
+ if (rx_valid_cnt == 0)
+ break;
+
+ if (rx_valid_cnt > bytes_in_buf)
+ rx_valid_cnt = bytes_in_buf;
+
+ tmp_val = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RB);
+
+ for (i = 0; i < rx_valid_cnt; i++)
+ {
+ *info->rxbuf_ptr = (tmp_val >> (8 * (rx_valid_cnt - i - 1))) & 0xff;
+ bytes_in_buf--;
+ info->rxbuf_ptr++;
+ }
+ info->stats.rxBytes += rx_valid_cnt;
+ }
+
+ // check if transfer is complete
+ if (info->rxbuf_ptr >= info->rxbuf_end)
+ {
+ disable_irq(info->rxirq);
+ wake_up_interruptible (&info->rwait);
+ } else if ((info->opts.modeRxTx == IFX_SSC_MODE_RX) && (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) == 0))
+ {
+ if (info->rxbuf_end - info->rxbuf_ptr < IFX_SSC_RXREQ_BLOCK_SIZE)
+ WRITE_PERIPHERAL_REGISTER ((info->rxbuf_end - info->rxbuf_ptr) << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
+ else
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
+ }
+}
+
+inline static void
+tx_int (struct ifx_ssc_port *info)
+{
+
+ int fifo_space, fill, i;
+ fifo_space = ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_ID) & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
+ - ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_FSTAT) & IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK) >> IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET);
+
+ if (fifo_space == 0)
+ return;
+
+ fill = info->txbuf_end - info->txbuf_ptr;
+
+ if (fill > fifo_space * 4)
+ fill = fifo_space * 4;
+
+ for (i = 0; i < fill / 4; i++)
+ {
+ // at first 32 bit access
+ WRITE_PERIPHERAL_REGISTER (*(UINT32 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr += 4;
+ }
+
+ fifo_space -= fill / 4;
+ info->stats.txBytes += fill & ~0x3;
+ fill &= 0x3;
+ if ((fifo_space > 0) & (fill > 1))
+ {
+ // trailing 16 bit access
+ WRITE_PERIPHERAL_REGISTER_16 (*(UINT16 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr += 2;
+ info->stats.txBytes += 2;
+ fifo_space--;
+ fill -= 2;
+ }
+
+ if ((fifo_space > 0) & (fill > 0))
+ {
+ // trailing 8 bit access
+ WRITE_PERIPHERAL_REGISTER_8 (*(UINT8 *) info->txbuf_ptr, info->mapbase + IFX_SSC_TB);
+ info->txbuf_ptr++;
+ info->stats.txBytes++;
+ }
+
+ // check if transmission complete
+ if (info->txbuf_ptr >= info->txbuf_end)
+ {
+ disable_irq(info->txirq);
+ kfree (info->txbuf);
+ info->txbuf = NULL;
+ }
+
+}
+
+irqreturn_t
+ifx_ssc_rx_int (int irq, void *dev_id)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
+ rx_int (info);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t
+ifx_ssc_tx_int (int irq, void *dev_id)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
+ tx_int (info);
+
+ return IRQ_HANDLED;
+}
+
+irqreturn_t
+ifx_ssc_err_int (int irq, void *dev_id)
+{
+ struct ifx_ssc_port *info = (struct ifx_ssc_port *) dev_id;
+ unsigned int state;
+ unsigned int write_back = 0;
+ unsigned long flags;
+
+ local_irq_save (flags);
+ state = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE);
+
+ if ((state & IFX_SSC_STATE_RX_UFL) != 0) {
+ info->stats.rxUnErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR;
+ }
+
+ if ((state & IFX_SSC_STATE_RX_OFL) != 0) {
+ info->stats.rxOvErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR;
+ }
+
+ if ((state & IFX_SSC_STATE_TX_OFL) != 0) {
+ info->stats.txOvErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR;
+ }
+
+ if ((state & IFX_SSC_STATE_TX_UFL) != 0) {
+ info->stats.txUnErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR;
+ }
+
+ if ((state & IFX_SSC_STATE_MODE_ERR) != 0) {
+ info->stats.modeErr++;
+ write_back |= IFX_SSC_WHBSTATE_CLR_MODE_ERROR;
+ }
+
+ if (write_back)
+ WRITE_PERIPHERAL_REGISTER (write_back, info->mapbase + IFX_SSC_WHBSTATE);
+
+ local_irq_restore (flags);
+
+ return IRQ_HANDLED;
+}
+
+static void
+ifx_ssc_abort (struct ifx_ssc_port *info)
+{
+ unsigned long flags;
+ bool enabled;
+
+ local_irq_save (flags);
+
+ disable_irq(info->rxirq);
+ disable_irq(info->txirq);
+ disable_irq(info->errirq);
+
+ local_irq_restore (flags);
+
+ // disable SSC (also aborts a receive request!)
+ // ### TO DO: Perhaps it's better to abort after the receiption of a
+ // complete word. The disable cuts the transmission immediatly and
+ // releases the chip selects. This could result in unpredictable
+ // behavior of connected external devices!
+ enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED) != 0;
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ // flush fifos
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_TXFCON);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_XFCON_FIFO_FLUSH, info->mapbase + IFX_SSC_RXFCON);
+
+ // free txbuf
+ if (info->txbuf != NULL)
+ {
+ kfree (info->txbuf);
+ info->txbuf = NULL;
+ }
+
+ // wakeup read process
+ if (info->rxbuf != NULL)
+ wake_up_interruptible (&info->rwait);
+
+ // clear pending int's
+ mask_and_ack_danube_irq(info->rxirq);
+ mask_and_ack_danube_irq(info->txirq);
+ mask_and_ack_danube_irq(info->errirq);
+
+ // clear error flags
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE);
+
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+}
+
+/*
+ * This routine is called whenever a port is opened. It enforces
+ * exclusive opening of a port and enables interrupts, etc.
+ */
+int
+ifx_ssc_open (struct inode *inode, struct file *filp)
+{
+ struct ifx_ssc_port *info;
+ int line;
+ int from_kernel = 0;
+
+ if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1)) {
+ from_kernel = 1;
+ line = (int) inode;
+ } else {
+ line = MINOR (filp->f_dentry->d_inode->i_rdev);
+ filp->f_op = &ifx_ssc_fops;
+ }
+
+ /* don't open more minor devices than we can support */
+ if (line < 0 || line >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[line];
+
+ /* exclusive open */
+ if (info->port_is_open != 0)
+ return -EBUSY;
+ info->port_is_open++;
+
+ disable_irq(info->rxirq);
+ disable_irq(info->txirq);
+ disable_irq(info->errirq);
+
+ /* Flush and enable TX/RX FIFO */
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_TXFCON);
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_FLUSH | IFX_SSC_XFCON_FIFO_ENABLE, info->mapbase + IFX_SSC_RXFCON);
+
+ /* logically flush the software FIFOs */
+ info->rxbuf_ptr = 0;
+ info->txbuf_ptr = 0;
+
+ /* clear all error bits */
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ALL_ERROR, info->mapbase + IFX_SSC_WHBSTATE);
+
+ // clear pending interrupts
+ mask_and_ack_danube_irq(info->rxirq);
+ mask_and_ack_danube_irq(info->txirq);
+ mask_and_ack_danube_irq(info->errirq);
+
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ return 0;
+}
+EXPORT_SYMBOL(ifx_ssc_open);
+
+int
+ifx_ssc_close (struct inode *inode, struct file *filp)
+{
+ struct ifx_ssc_port *info;
+ int idx;
+
+ if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1))
+ idx = (int) inode;
+ else
+ idx = MINOR (filp->f_dentry->d_inode->i_rdev);
+
+ if (idx < 0 || idx >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[idx];
+ if (!info)
+ return -ENXIO;
+
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ ifx_ssc_abort(info);
+
+ info->port_is_open--;
+
+ return 0;
+}
+EXPORT_SYMBOL(ifx_ssc_close);
+
+static ssize_t
+ifx_ssc_read_helper_poll (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel)
+{
+ ssize_t ret_val;
+ unsigned long flags;
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ return -EFAULT;
+ local_irq_save (flags);
+ info->rxbuf_ptr = info->rxbuf;
+ info->rxbuf_end = info->rxbuf + len;
+ local_irq_restore (flags);
+ /* Vinetic driver always works in IFX_SSC_MODE_RXTX */
+ /* TXRX in poll mode */
+ while (info->rxbuf_ptr < info->rxbuf_end)
+ {
+ if (info->txbuf_ptr < info->txbuf_end)
+ tx_int (info);
+
+ rx_int (info);
+ };
+
+ ret_val = info->rxbuf_ptr - info->rxbuf;
+
+ return ret_val;
+}
+
+static ssize_t
+ifx_ssc_read_helper (struct ifx_ssc_port *info, char *buf, size_t len, int from_kernel)
+{
+ ssize_t ret_val;
+ unsigned long flags;
+ DECLARE_WAITQUEUE (wait, current);
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ return -EFAULT;
+
+ local_irq_save (flags);
+ info->rxbuf_ptr = info->rxbuf;
+ info->rxbuf_end = info->rxbuf + len;
+
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RXTX)
+ {
+ if ((info->txbuf == NULL) || (info->txbuf != info->txbuf_ptr) || (info->txbuf_end != len + info->txbuf))
+ {
+ local_irq_restore (flags);
+ printk ("IFX SSC - %s: write must be called before calling " "read in combined RX/TX!\n", __func__);
+ return -EFAULT;
+ }
+
+ local_irq_restore(flags);
+ tx_int (info);
+
+ if (info->txbuf_ptr < info->txbuf_end)
+ enable_irq(info->txirq);
+
+ enable_irq(info->rxirq);
+ } else {
+ local_irq_restore(flags);
+ if (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK)
+ return -EBUSY;
+ enable_irq(info->rxirq);
+ if (len < IFX_SSC_RXREQ_BLOCK_SIZE)
+ WRITE_PERIPHERAL_REGISTER (len << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
+ else
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_RXREQ_BLOCK_SIZE << IFX_SSC_RXREQ_RXCOUNT_OFFSET, info->mapbase + IFX_SSC_RXREQ);
+ }
+
+ __add_wait_queue (&info->rwait, &wait);
+ set_current_state (TASK_INTERRUPTIBLE);
+
+ do {
+ local_irq_save (flags);
+ if (info->rxbuf_ptr >= info->rxbuf_end)
+ break;
+
+ local_irq_restore (flags);
+
+ if (signal_pending (current))
+ {
+ ret_val = -ERESTARTSYS;
+ goto out;
+ }
+ schedule();
+ } while (1);
+
+ ret_val = info->rxbuf_ptr - info->rxbuf;
+ local_irq_restore (flags);
+
+out:
+ current->state = TASK_RUNNING;
+ __remove_wait_queue (&info->rwait, &wait);
+
+ return (ret_val);
+}
+
+static ssize_t
+ifx_ssc_write_helper (struct ifx_ssc_port *info, const char *buf,
+ size_t len, int from_kernel)
+{
+ if (info->opts.modeRxTx == IFX_SSC_MODE_RX)
+ return -EFAULT;
+
+ info->txbuf_ptr = info->txbuf;
+ info->txbuf_end = len + info->txbuf;
+ if (info->opts.modeRxTx == IFX_SSC_MODE_TX)
+ {
+ tx_int (info);
+ if (info->txbuf_ptr < info->txbuf_end)
+ {
+ enable_irq(info->txirq);
+ }
+ }
+
+ return len;
+}
+
+ssize_t
+ifx_ssc_kread (int port, char *kbuf, size_t len)
+{
+ struct ifx_ssc_port *info;
+ ssize_t ret_val;
+
+ if (port < 0 || port >= PORT_CNT)
+ return -ENXIO;
+
+ if (len == 0)
+ return 0;
+
+ info = &isp[port];
+
+ if (info->rxbuf != NULL)
+ {
+ printk ("SSC device busy\n");
+ return -EBUSY;
+ }
+
+ info->rxbuf = kbuf;
+ if (info->rxbuf == NULL)
+ {
+ printk ("SSC device error\n");
+ return -EINVAL;
+ }
+
+ ret_val = ifx_ssc_read_helper_poll (info, kbuf, len, 1);
+ info->rxbuf = NULL;
+
+ disable_irq(info->rxirq);
+
+ return ret_val;
+}
+EXPORT_SYMBOL(ifx_ssc_kread);
+
+ssize_t
+ifx_ssc_kwrite (int port, const char *kbuf, size_t len)
+{
+ struct ifx_ssc_port *info;
+ ssize_t ret_val;
+
+ if (port < 0 || port >= PORT_CNT)
+ return -ENXIO;
+
+ if (len == 0)
+ return 0;
+
+ info = &isp[port];
+
+ // check if transmission in progress
+ if (info->txbuf != NULL)
+ return -EBUSY;
+
+ info->txbuf = (char *) kbuf;
+
+ ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 1);
+
+ if (ret_val < 0)
+ info->txbuf = NULL;
+
+ return ret_val;
+}
+EXPORT_SYMBOL(ifx_ssc_kwrite);
+
+static ssize_t
+ifx_ssc_read (struct file *filp, char *ubuf, size_t len, loff_t * off)
+{
+ ssize_t ret_val;
+ int idx;
+ struct ifx_ssc_port *info;
+
+ idx = MINOR (filp->f_dentry->d_inode->i_rdev);
+ info = &isp[idx];
+
+ if (info->rxbuf != NULL)
+ return -EBUSY;
+
+ info->rxbuf = kmalloc (len + 3, GFP_KERNEL);
+ if (info->rxbuf == NULL)
+ return -ENOMEM;
+
+ ret_val = ifx_ssc_read_helper (info, info->rxbuf, len, 0);
+ if (copy_to_user ((void *) ubuf, info->rxbuf, ret_val) != 0)
+ ret_val = -EFAULT;
+
+ disable_irq(info->rxirq);
+
+ kfree (info->rxbuf);
+ info->rxbuf = NULL;
+
+ return (ret_val);
+}
+
+static ssize_t
+ifx_ssc_write (struct file *filp, const char *ubuf, size_t len, loff_t * off)
+{
+ int idx;
+ struct ifx_ssc_port *info;
+ int ret_val;
+
+ if (len == 0)
+ return (0);
+
+ idx = MINOR (filp->f_dentry->d_inode->i_rdev);
+ info = &isp[idx];
+
+ if (info->txbuf != NULL)
+ return -EBUSY;
+
+ info->txbuf = kmalloc (len + 3, GFP_KERNEL);
+ if (info->txbuf == NULL)
+ return -ENOMEM;
+
+ ret_val = copy_from_user (info->txbuf, ubuf, len);
+ if (ret_val == 0)
+ ret_val = ifx_ssc_write_helper (info, info->txbuf, len, 0);
+ else
+ ret_val = -EFAULT;
+
+ if (ret_val < 0)
+ {
+ kfree (info->txbuf);
+ info->txbuf = NULL;
+ }
+
+ return (ret_val);
+}
+
+static struct ifx_ssc_frm_status *
+ifx_ssc_frm_status_get (struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFSTAT);
+ info->frm_status.DataBusy = (tmp & IFX_SSC_SFSTAT_IN_DATA) > 0;
+ info->frm_status.PauseBusy = (tmp & IFX_SSC_SFSTAT_IN_PAUSE) > 0;
+ info->frm_status.DataCount = (tmp & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET;
+ info->frm_status.PauseCount = (tmp & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET;
+ tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON);
+ info->frm_status.EnIntAfterData = (tmp & IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE) > 0;
+ info->frm_status.EnIntAfterPause = (tmp & IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE) > 0;
+
+ return &info->frm_status;
+}
+
+
+static struct ifx_ssc_frm_opts *
+ifx_ssc_frm_control_get (struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON);
+ info->frm_opts.FrameEnable = (tmp & IFX_SSC_SFCON_SF_ENABLE) > 0;
+ info->frm_opts.DataLength = (tmp & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
+ info->frm_opts.PauseLength = (tmp & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
+ info->frm_opts.IdleData = (tmp & IFX_SSC_SFCON_PAUSE_DATA_MASK) >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
+ info->frm_opts.IdleClock = (tmp & IFX_SSC_SFCON_PAUSE_CLOCK_MASK) >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
+ info->frm_opts.StopAfterPause = (tmp & IFX_SSC_SFCON_STOP_AFTER_PAUSE) > 0;
+
+ return &info->frm_opts;
+}
+
+static int
+ifx_ssc_frm_control_set (struct ifx_ssc_port *info)
+{
+ unsigned long tmp;
+
+ // check parameters
+ if ((info->frm_opts.DataLength > IFX_SSC_SFCON_DATA_LENGTH_MAX)
+ || (info->frm_opts.DataLength < 1)
+ || (info->frm_opts.PauseLength > IFX_SSC_SFCON_PAUSE_LENGTH_MAX)
+ || (info->frm_opts.PauseLength < 1)
+ || (info->frm_opts.IdleData & ~(IFX_SSC_SFCON_PAUSE_DATA_MASK >> IFX_SSC_SFCON_PAUSE_DATA_OFFSET))
+ || (info->frm_opts.IdleClock & ~(IFX_SSC_SFCON_PAUSE_CLOCK_MASK >> IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET)))
+ return -EINVAL;
+
+ // read interrupt bits (they're not changed here)
+ tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_SFCON) &
+ (IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE | IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE);
+
+ // set all values with respect to it's bit position (for data and pause
+ // length set N-1)
+ tmp = (info->frm_opts.DataLength - 1) << IFX_SSC_SFCON_DATA_LENGTH_OFFSET;
+ tmp |= (info->frm_opts.PauseLength - 1) << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET;
+ tmp |= info->frm_opts.IdleData << IFX_SSC_SFCON_PAUSE_DATA_OFFSET;
+ tmp |= info->frm_opts.IdleClock << IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET;
+ tmp |= info->frm_opts.FrameEnable * IFX_SSC_SFCON_SF_ENABLE;
+ tmp |= info->frm_opts.StopAfterPause * IFX_SSC_SFCON_STOP_AFTER_PAUSE;
+
+ WRITE_PERIPHERAL_REGISTER(tmp, info->mapbase + IFX_SSC_SFCON);
+
+ return 0;
+}
+
+static int
+ifx_ssc_rxtx_mode_set (struct ifx_ssc_port *info, unsigned int val)
+{
+ unsigned long tmp;
+
+ if (!(info) || (val & ~(IFX_SSC_MODE_MASK)))
+ return -EINVAL;
+
+ if ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_BUSY)
+ || (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_RXCNT) & IFX_SSC_RXCNT_TODO_MASK))
+ return -EBUSY;
+
+ tmp = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) & ~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF)) | (val);
+ WRITE_PERIPHERAL_REGISTER (tmp, info->mapbase + IFX_SSC_CON);
+ info->opts.modeRxTx = val;
+
+ return 0;
+}
+
+static int
+ifx_ssc_sethwopts (struct ifx_ssc_port *info)
+{
+ unsigned long flags, bits;
+ struct ifx_ssc_hwopts *opts = &info->opts;
+
+ if ((opts->dataWidth < IFX_SSC_MIN_DATA_WIDTH)
+ || (opts->dataWidth > IFX_SSC_MAX_DATA_WIDTH))
+ return -EINVAL;
+
+ bits = (opts->dataWidth - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET;
+ bits |= IFX_SSC_CON_ENABLE_BYTE_VALID;
+
+ if (opts->rxOvErrDetect)
+ bits |= IFX_SSC_CON_RX_OFL_CHECK;
+ if (opts->rxUndErrDetect)
+ bits |= IFX_SSC_CON_RX_UFL_CHECK;
+ if (opts->txOvErrDetect)
+ bits |= IFX_SSC_CON_TX_OFL_CHECK;
+ if (opts->txUndErrDetect)
+ bits |= IFX_SSC_CON_TX_UFL_CHECK;
+ if (opts->loopBack)
+ bits |= IFX_SSC_CON_LOOPBACK_MODE;
+ if (opts->echoMode)
+ bits |= IFX_SSC_CON_ECHO_MODE_ON;
+ if (opts->headingControl)
+ bits |= IFX_SSC_CON_MSB_FIRST;
+ if (opts->clockPhase)
+ bits |= IFX_SSC_CON_LATCH_THEN_SHIFT;
+ if (opts->clockPolarity)
+ bits |= IFX_SSC_CON_CLOCK_FALL;
+
+ switch (opts->modeRxTx)
+ {
+ case IFX_SSC_MODE_TX:
+ bits |= IFX_SSC_CON_RX_OFF;
+ break;
+ case IFX_SSC_MODE_RX:
+ bits |= IFX_SSC_CON_TX_OFF;
+ break;
+ }
+
+ local_irq_save (flags);
+
+ WRITE_PERIPHERAL_REGISTER (bits, info->mapbase + IFX_SSC_CON);
+ WRITE_PERIPHERAL_REGISTER ((info->opts.gpoCs << IFX_SSC_GPOCON_ISCSB0_POS) |
+ (info->opts.gpoInv << IFX_SSC_GPOCON_INVOUT0_POS), info->mapbase + IFX_SSC_GPOCON);
+
+ WRITE_PERIPHERAL_REGISTER (info->opts.gpoCs << IFX_SSC_WHBGPOSTAT_SETOUT0_POS, info->mapbase + IFX_SSC_WHBGPOSTAT);
+
+ //master mode
+ if (opts->masterSelect)
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
+ else
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_MASTER_SELECT, info->mapbase + IFX_SSC_WHBSTATE);
+
+ // init serial framing
+ WRITE_PERIPHERAL_REGISTER (0, info->mapbase + IFX_SSC_SFCON);
+ /* set up the port pins */
+ //check for general requirements to switch (external) pad/pin characteristics
+ /* TODO: P0.9 SPI_CS4, P0.10 SPI_CS5, P 0.11 SPI_CS6, because of ASC0 */
+ /* p0.15 SPI_CS1(EEPROM), P0.13 SPI_CS3, */
+ /* Set p0.15 to alternative 01, others to 00 (In/OUT) */
+ *(DANUBE_GPIO_P0_DIR) = (*DANUBE_GPIO_P0_DIR) | (0xA000);
+ *(DANUBE_GPIO_P0_ALTSEL0) = (((*DANUBE_GPIO_P0_ALTSEL0) | (0x8000)) & (~(0x2000)));
+ *(DANUBE_GPIO_P0_ALTSEL1) = (((*DANUBE_GPIO_P0_ALTSEL1) & (~0x8000)) & (~(0x2000)));
+ *(DANUBE_GPIO_P0_OD) = (*DANUBE_GPIO_P0_OD) | 0xA000;
+
+ /* p1.6 SPI_CS2(SFLASH), p1.0 SPI_DIN, p1.1 SPI_DOUT, p1.2 SPI_CLK */
+ *(DANUBE_GPIO_P1_DIR) = ((*DANUBE_GPIO_P1_DIR) | (0x46)) & (~1);
+ *(DANUBE_GPIO_P1_ALTSEL0) = ((*DANUBE_GPIO_P1_ALTSEL0) | (0x47));
+ *(DANUBE_GPIO_P1_ALTSEL1) = (*DANUBE_GPIO_P1_ALTSEL1) & (~0x47);
+ *(DANUBE_GPIO_P1_OD) = (*DANUBE_GPIO_P1_OD) | 0x0046;
+
+ /*CS3 */
+ /*TODO: CS4 CS5 CS6 */
+ *DANUBE_GPIO_P0_OUT = ((*DANUBE_GPIO_P0_OUT) | 0x2000);
+
+ local_irq_restore (flags);
+
+ return 0;
+}
+
+static int
+ifx_ssc_set_baud (struct ifx_ssc_port *info, unsigned int baud)
+{
+ unsigned int ifx_ssc_clock;
+ unsigned int br;
+ unsigned long flags;
+ bool enabled;
+ int retval = 0;
+
+ ifx_ssc_clock = ifx_ssc_get_kernel_clk(info);
+ if (ifx_ssc_clock == 0)
+ {
+ retval = -EINVAL;
+ goto out;
+ }
+
+ local_irq_save (flags);
+
+ enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ br = (((ifx_ssc_clock >> 1) + baud / 2) / baud) - 1;
+ wmb();
+
+ if (br > 0xffff || ((br == 0) &&
+ ((READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_MASTER) == 0))) {
+ local_irq_restore (flags);
+ printk ("%s: invalid baudrate %u\n", __func__, baud);
+ return -EINVAL;
+ }
+
+ WRITE_PERIPHERAL_REGISTER (br, info->mapbase + IFX_SSC_BR);
+
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ local_irq_restore(flags);
+
+out:
+ return retval;
+}
+
+static int
+ifx_ssc_hwinit (struct ifx_ssc_port *info)
+{
+ unsigned long flags;
+ bool enabled;
+
+ enabled = (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE) & IFX_SSC_STATE_IS_ENABLED);
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ if (ifx_ssc_sethwopts (info) < 0)
+ {
+ printk ("%s: setting the hardware options failed\n", __func__);
+ return -EINVAL;
+ }
+
+ if (ifx_ssc_set_baud (info, info->baud) < 0)
+ {
+ printk ("%s: setting the baud rate failed\n", __func__);
+ return -EINVAL;
+ }
+
+ local_irq_save (flags);
+
+ /* TX FIFO */
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_TXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_TXFCON);
+ /* RX FIFO */
+ WRITE_PERIPHERAL_REGISTER ((IFX_SSC_DEF_RXFIFO_FL << IFX_SSC_XFCON_ITL_OFFSET) | IFX_SSC_XFCON_FIFO_ENABLE,
+ info->mapbase + IFX_SSC_RXFCON);
+
+ local_irq_restore (flags);
+
+ if (enabled)
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_SET_ENABLE, info->mapbase + IFX_SSC_WHBSTATE);
+
+ return 0;
+}
+
+int
+ifx_ssc_ioctl (struct inode *inode, struct file *filp, unsigned int cmd, unsigned long data)
+{
+ struct ifx_ssc_port *info;
+ int line, ret_val = 0;
+ unsigned long flags;
+ unsigned long tmp;
+ int from_kernel = 0;
+
+ if ((inode == (struct inode *) 0) || (inode == (struct inode *) 1))
+ {
+ from_kernel = 1;
+ line = (int) inode;
+ } else {
+ line = MINOR (filp->f_dentry->d_inode->i_rdev);
+ }
+
+ if (line < 0 || line >= PORT_CNT)
+ return -ENXIO;
+
+ info = &isp[line];
+
+ switch (cmd)
+ {
+ case IFX_SSC_STATS_READ:
+ /* data must be a pointer to a struct ifx_ssc_statistics */
+ if (from_kernel)
+ memcpy ((void *) data, (void *) &info->stats,
+ sizeof (struct ifx_ssc_statistics));
+ else if (copy_to_user ((void *) data,
+ (void *) &info->stats,
+ sizeof (struct ifx_ssc_statistics)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_STATS_RESET:
+ /* just resets the statistics counters */
+ memset ((void *) &info->stats, 0,
+ sizeof (struct ifx_ssc_statistics));
+ break;
+ case IFX_SSC_BAUD_SET:
+ /* if the buffers are not empty then the port is */
+ /* busy and we shouldn't change things on-the-fly! */
+ if (!info->txbuf || !info->rxbuf ||
+ (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_BUSY)) {
+ ret_val = -EBUSY;
+ break;
+ }
+ /* misuse flags */
+ if (from_kernel)
+ flags = *((unsigned long *) data);
+ else if (copy_from_user ((void *) &flags,
+ (void *) data, sizeof (flags))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (flags == 0) {
+ ret_val = -EINVAL;
+ break;
+ }
+ if (ifx_ssc_set_baud (info, flags) < 0) {
+ ret_val = -EINVAL;
+ break;
+ }
+ info->baud = flags;
+ break;
+ case IFX_SSC_BAUD_GET:
+ if (from_kernel)
+ *((unsigned int *) data) = info->baud;
+ else if (copy_to_user ((void *) data,
+ (void *) &info->baud,
+ sizeof (unsigned long)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_RXTX_MODE_SET:
+ if (from_kernel)
+ tmp = *((unsigned long *) data);
+ else if (copy_from_user ((void *) &tmp,
+ (void *) data, sizeof (tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ ret_val = ifx_ssc_rxtx_mode_set (info, tmp);
+ break;
+ case IFX_SSC_RXTX_MODE_GET:
+ tmp = READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_CON) &
+ (~(IFX_SSC_CON_RX_OFF | IFX_SSC_CON_TX_OFF));
+ if (from_kernel)
+ *((unsigned int *) data) = tmp;
+ else if (copy_to_user ((void *) data,
+ (void *) &tmp, sizeof (tmp)))
+ ret_val = -EFAULT;
+ break;
+
+ case IFX_SSC_ABORT:
+ ifx_ssc_abort (info);
+ break;
+
+ case IFX_SSC_GPO_OUT_SET:
+ if (from_kernel)
+ tmp = *((unsigned long *) data);
+ else if (copy_from_user ((void *) &tmp,
+ (void *) data, sizeof (tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (tmp > IFX_SSC_MAX_GPO_OUT)
+ ret_val = -EINVAL;
+ else
+ WRITE_PERIPHERAL_REGISTER
+ (1 << (tmp + IFX_SSC_WHBGPOSTAT_SETOUT0_POS),
+ info->mapbase + IFX_SSC_WHBGPOSTAT);
+ break;
+ case IFX_SSC_GPO_OUT_CLR:
+ if (from_kernel)
+ tmp = *((unsigned long *) data);
+ else if (copy_from_user ((void *) &tmp,
+ (void *) data, sizeof (tmp))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (tmp > IFX_SSC_MAX_GPO_OUT)
+ ret_val = -EINVAL;
+ else {
+ WRITE_PERIPHERAL_REGISTER
+ (1 << (tmp + IFX_SSC_WHBGPOSTAT_CLROUT0_POS),
+ info->mapbase + IFX_SSC_WHBGPOSTAT);
+ }
+ break;
+ case IFX_SSC_GPO_OUT_GET:
+ tmp = READ_PERIPHERAL_REGISTER
+ (info->mapbase + IFX_SSC_GPOSTAT);
+ if (from_kernel)
+ *((unsigned int *) data) = tmp;
+ else if (copy_to_user ((void *) data,
+ (void *) &tmp, sizeof (tmp)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_STATUS_GET:
+ ifx_ssc_frm_status_get (info);
+ if (from_kernel)
+ memcpy ((void *) data, (void *) &info->frm_status,
+ sizeof (struct ifx_ssc_frm_status));
+ else if (copy_to_user ((void *) data,
+ (void *) &info->frm_status,
+ sizeof (struct ifx_ssc_frm_status)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_CONTROL_GET:
+ ifx_ssc_frm_control_get (info);
+ if (from_kernel)
+ memcpy ((void *) data, (void *) &info->frm_opts,
+ sizeof (struct ifx_ssc_frm_opts));
+ else if (copy_to_user ((void *) data,
+ (void *) &info->frm_opts,
+ sizeof (struct ifx_ssc_frm_opts)))
+ ret_val = -EFAULT;
+ break;
+ case IFX_SSC_FRM_CONTROL_SET:
+ if (from_kernel)
+ memcpy ((void *) &info->frm_opts, (void *) data,
+ sizeof (struct ifx_ssc_frm_opts));
+ else if (copy_to_user ((void *) &info->frm_opts,
+ (void *) data,
+ sizeof (struct ifx_ssc_frm_opts))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ ret_val = ifx_ssc_frm_control_set (info);
+ break;
+ case IFX_SSC_HWOPTS_SET:
+ /* data must be a pointer to a struct ifx_ssc_hwopts */
+ /* if the buffers are not empty then the port is */
+ /* busy and we shouldn't change things on-the-fly! */
+ if (!info->txbuf || !info->rxbuf ||
+ (READ_PERIPHERAL_REGISTER (info->mapbase + IFX_SSC_STATE)
+ & IFX_SSC_STATE_BUSY)) {
+ ret_val = -EBUSY;
+ break;
+ }
+ if (from_kernel)
+ memcpy ((void *) &info->opts, (void *) data,
+ sizeof (struct ifx_ssc_hwopts));
+ else if (copy_from_user ((void *) &info->opts,
+ (void *) data,
+ sizeof (struct ifx_ssc_hwopts))) {
+ ret_val = -EFAULT;
+ break;
+ }
+ if (ifx_ssc_hwinit (info) < 0) {
+ ret_val = -EIO;
+ }
+ break;
+ case IFX_SSC_HWOPTS_GET:
+ /* data must be a pointer to a struct ifx_ssc_hwopts */
+ if (from_kernel)
+ memcpy ((void *) data, (void *) &info->opts,
+ sizeof (struct ifx_ssc_hwopts));
+ else if (copy_to_user ((void *) data,
+ (void *) &info->opts,
+ sizeof (struct ifx_ssc_hwopts)))
+ ret_val = -EFAULT;
+ break;
+ default:
+ ret_val = -ENOIOCTLCMD;
+ }
+
+ return ret_val;
+}
+EXPORT_SYMBOL(ifx_ssc_ioctl);
+
+static int
+ifx_ssc1_read_proc (char *page, char **start, off_t offset, int count, int *eof, void *data)
+{
+ int off = 0;
+ unsigned long flags;
+
+ local_save_flags(flags);
+ local_irq_disable();
+
+ off += sprintf (page + off, "Statistics for Infineon Synchronous Serial Controller SSC1\n");
+ off += sprintf (page + off, "RX overflow errors %d\n", isp[0].stats.rxOvErr);
+ off += sprintf (page + off, "RX underflow errors %d\n", isp[0].stats.rxUnErr);
+ off += sprintf (page + off, "TX overflow errors %d\n", isp[0].stats.txOvErr);
+ off += sprintf (page + off, "TX underflow errors %d\n", isp[0].stats.txUnErr);
+ off += sprintf (page + off, "Abort errors %d\n", isp[0].stats.abortErr);
+ off += sprintf (page + off, "Mode errors %d\n", isp[0].stats.modeErr);
+ off += sprintf (page + off, "RX Bytes %d\n", isp[0].stats.rxBytes);
+ off += sprintf (page + off, "TX Bytes %d\n", isp[0].stats.txBytes);
+
+ local_irq_restore(flags);
+ *eof = 1;
+
+ return off;
+}
+
+int __init
+ifx_ssc_init (void)
+{
+ struct ifx_ssc_port *info;
+ int i, nbytes;
+ unsigned long flags;
+ int ret_val;
+
+ ret_val = -ENOMEM;
+ nbytes = PORT_CNT * sizeof(struct ifx_ssc_port);
+ isp = (struct ifx_ssc_port*)kmalloc(nbytes, GFP_KERNEL);
+
+ if (isp == NULL)
+ {
+ printk("%s: no memory for isp\n", __func__);
+ return (ret_val);
+ }
+ memset(isp, 0, nbytes);
+
+ ret_val = -ENXIO;
+ if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0)
+ {
+ printk ("Unable to register major %d for the Infineon SSC\n", maj);
+ if (maj == 0)
+ {
+ goto errout;
+ } else {
+ maj = 0;
+ if ((i = register_chrdev (maj, "ssc", &ifx_ssc_fops)) < 0)
+ {
+ printk ("Unable to register major %d for the Infineon SSC\n", maj);
+ goto errout;
+ }
+ }
+ }
+
+ if (maj == 0)
+ maj = i;
+
+ /* set default values in ifx_ssc_port */
+ for (i = 0; i < PORT_CNT; i++) {
+ info = &isp[i];
+ info->port_nr = i;
+ /* default values for the HwOpts */
+ info->opts.AbortErrDetect = IFX_SSC_DEF_ABRT_ERR_DETECT;
+ info->opts.rxOvErrDetect = IFX_SSC_DEF_RO_ERR_DETECT;
+ info->opts.rxUndErrDetect = IFX_SSC_DEF_RU_ERR_DETECT;
+ info->opts.txOvErrDetect = IFX_SSC_DEF_TO_ERR_DETECT;
+ info->opts.txUndErrDetect = IFX_SSC_DEF_TU_ERR_DETECT;
+ info->opts.loopBack = IFX_SSC_DEF_LOOP_BACK;
+ info->opts.echoMode = IFX_SSC_DEF_ECHO_MODE;
+ info->opts.idleValue = IFX_SSC_DEF_IDLE_DATA;
+ info->opts.clockPolarity = IFX_SSC_DEF_CLOCK_POLARITY;
+ info->opts.clockPhase = IFX_SSC_DEF_CLOCK_PHASE;
+ info->opts.headingControl = IFX_SSC_DEF_HEADING_CONTROL;
+ info->opts.dataWidth = IFX_SSC_DEF_DATA_WIDTH;
+ info->opts.modeRxTx = IFX_SSC_DEF_MODE_RXTX;
+ info->opts.gpoCs = IFX_SSC_DEF_GPO_CS;
+ info->opts.gpoInv = IFX_SSC_DEF_GPO_INV;
+ info->opts.masterSelect = IFX_SSC_DEF_MASTERSLAVE;
+ info->baud = IFX_SSC_DEF_BAUDRATE;
+ info->rxbuf = NULL;
+ info->txbuf = NULL;
+ /* values specific to SSC1 */
+ if (i == 0) {
+ info->mapbase = DANUBE_SSC1_BASE_ADDR;
+ info->txirq = DANUBE_SSC_TIR;
+ info->rxirq = DANUBE_SSC_RIR;
+ info->errirq = DANUBE_SSC_EIR;
+ }
+
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_RMC << IFX_CLC_RUN_DIVIDER_OFFSET, info->mapbase + IFX_SSC_CLC);
+
+ init_waitqueue_head (&info->rwait);
+
+ local_irq_save (flags);
+
+ // init serial framing register
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_SFCON, info->mapbase + IFX_SSC_SFCON);
+
+ ret_val = request_irq(info->txirq, ifx_ssc_tx_int, SA_INTERRUPT, "ifx_ssc_tx", info);
+ if (ret_val)
+ {
+ printk("%s: unable to get irq %d\n", __func__, info->txirq);
+ local_irq_restore(flags);
+ goto errout;
+ }
+
+ ret_val = request_irq(info->rxirq, ifx_ssc_rx_int, SA_INTERRUPT, "ifx_ssc_rx", info);
+ if (ret_val)
+ {
+ printk ("%s: unable to get irq %d\n", __func__, info->rxirq);
+ local_irq_restore (flags);
+ goto irqerr;
+ }
+
+ ret_val = request_irq(info->errirq, ifx_ssc_err_int, SA_INTERRUPT,"ifx_ssc_err", info);
+ if (ret_val)
+ {
+ printk ("%s: unable to get irq %d\n", __func__, info->errirq);
+ local_irq_restore (flags);
+ goto irqerr;
+ }
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_DEF_IRNEN, info->mapbase + IFX_SSC_IRN_EN);
+
+ enable_irq(info->txirq);
+ enable_irq(info->rxirq);
+ enable_irq(info->errirq);
+
+ local_irq_restore (flags);
+ }
+
+ for (i = 0; i < PORT_CNT; i++) {
+ info = &isp[i];
+ if (ifx_ssc_hwinit (info) < 0)
+ {
+ printk ("%s: hardware init failed for port %d\n", __func__, i);
+ goto irqerr;
+ }
+ }
+
+ create_proc_read_entry ("driver/ssc1", 0, NULL, ifx_ssc1_read_proc, NULL);
+
+ return 0;
+
+irqerr:
+ free_irq(isp[0].txirq, &isp[0]);
+ free_irq(isp[0].rxirq, &isp[0]);
+ free_irq(isp[0].errirq, &isp[0]);
+errout:
+ kfree (isp);
+ return (ret_val);
+}
+
+void
+ifx_ssc_cleanup_module (void)
+{
+ int i;
+
+ for (i = 0; i < PORT_CNT; i++) {
+ WRITE_PERIPHERAL_REGISTER (IFX_SSC_WHBSTATE_CLR_ENABLE, isp[i].mapbase + IFX_SSC_WHBSTATE);
+ free_irq(isp[i].txirq, &isp[i]);
+ free_irq(isp[i].rxirq, &isp[i]);
+ free_irq(isp[i].errirq, &isp[i]);
+ }
+ kfree (isp);
+ remove_proc_entry ("driver/ssc1", NULL);
+}
+
+module_init(ifx_ssc_init);
+module_exit(ifx_ssc_cleanup_module);
+
+
+inline int
+ifx_ssc_cs_low (u32 pin)
+{
+ int ret = 0;
+ if ((ret = ifx_ssc_ioctl ((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_CLR, (unsigned long) &pin)))
+ printk ("clear CS %d fails\n", pin);
+ wmb ();
+
+ return ret;
+}
+EXPORT_SYMBOL(ifx_ssc_cs_low);
+
+inline int
+ifx_ssc_cs_high (u32 pin)
+{
+ int ret = 0;
+ if ((ret = ifx_ssc_ioctl((struct inode *) 0, NULL, IFX_SSC_GPO_OUT_SET, (unsigned long) &pin)))
+ printk ("set CS %d fails\n", pin);
+ wmb ();
+
+ return ret;
+}
+EXPORT_SYMBOL(ifx_ssc_cs_high);
+
+static int
+ssc_session (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
+{
+ int ret = 0;
+
+ char *ssc_tx_buf = NULL;
+ char *ssc_rx_buf = NULL;
+ int eff_size = 0;
+ u8 mode = 0;
+
+ if (tx_buf == NULL && tx_len == 0 && rx_buf == NULL && rx_len == 0) {
+ printk ("invalid parameters\n");
+ ret = -EINVAL;
+ goto ssc_session_exit;
+ }
+ else if (tx_buf == NULL || tx_len == 0) {
+ if (rx_buf != NULL && rx_len != 0) {
+ mode = IFX_SSC_MODE_RX;
+ }
+ else {
+ printk ("invalid parameters\n");
+ ret = -EINVAL;
+ goto ssc_session_exit;
+ }
+ }
+ else if (rx_buf == NULL || rx_len == 0) {
+ if (tx_buf != NULL && tx_len != 0) {
+ mode = IFX_SSC_MODE_TX;
+ }
+ else {
+ printk ("invalid parameters\n");
+ ret = -EINVAL;
+ goto ssc_session_exit;
+ }
+ }
+ else {
+ mode = IFX_SSC_MODE_RXTX;
+ }
+
+ if (mode == IFX_SSC_MODE_RXTX) {
+ eff_size = tx_len + rx_len;
+ }
+ else if (mode == IFX_SSC_MODE_RX) {
+ eff_size = rx_len;
+ }
+ else {
+ eff_size = tx_len;
+ }
+
+ //4 bytes alignment, required by driver
+ /* change by TaiCheng */
+ //if (in_irq()){
+ if (1) {
+ ssc_tx_buf =
+ (char *) kmalloc (sizeof (char) *
+ ((eff_size + 3) & (~3)),
+ GFP_ATOMIC);
+ ssc_rx_buf =
+ (char *) kmalloc (sizeof (char) *
+ ((eff_size + 3) & (~3)),
+ GFP_ATOMIC);
+ }
+ else {
+ ssc_tx_buf =
+ (char *) kmalloc (sizeof (char) *
+ ((eff_size + 3) & (~3)),
+ GFP_KERNEL);
+ ssc_rx_buf =
+ (char *) kmalloc (sizeof (char) *
+ ((eff_size + 3) & (~3)),
+ GFP_KERNEL);
+ }
+ if (ssc_tx_buf == NULL || ssc_rx_buf == NULL) {
+ printk ("no memory for size of %d\n", eff_size);
+ ret = -ENOMEM;
+ goto ssc_session_exit;
+ }
+ memset ((void *) ssc_tx_buf, 0, eff_size);
+ memset ((void *) ssc_rx_buf, 0, eff_size);
+
+ if (tx_len > 0) {
+ memcpy (ssc_tx_buf, tx_buf, tx_len);
+ }
+
+ ret = ifx_ssc_kwrite (0, ssc_tx_buf, eff_size);
+
+ if (ret > 0) {
+ ssc_tx_buf = NULL; //should be freed by ifx_ssc_kwrite
+ }
+
+ if (ret != eff_size) {
+ printk ("ifx_ssc_write return %d\n", ret);
+ goto ssc_session_exit;
+ }
+ ret = ifx_ssc_kread (0, ssc_rx_buf, eff_size);
+ if (ret != eff_size) {
+ printk ("ifx_ssc_read return %d\n", ret);
+ goto ssc_session_exit;
+ }
+
+ memcpy (rx_buf, ssc_rx_buf + tx_len, rx_len);
+
+ if (mode == IFX_SSC_MODE_TX) {
+ ret = tx_len;
+ }
+ else {
+ ret = rx_len;
+ }
+ ssc_session_exit:
+
+ if (ssc_tx_buf != NULL)
+ kfree (ssc_tx_buf);
+ if (ssc_rx_buf != NULL)
+ kfree (ssc_rx_buf);
+
+ if (ret < 0) {
+ printk ("ssc session fails\n");
+ }
+ return ret;
+}
+
+int
+ifx_ssc_txrx (char *tx_buf, u32 tx_len, char *rx_buf, u32 rx_len)
+{
+ return ssc_session(tx_buf, tx_len, rx_buf, rx_len);
+}
+EXPORT_SYMBOL(ifx_ssc_txrx);
+
+int
+ifx_ssc_tx (char *tx_buf, u32 tx_len)
+{
+ return ssc_session(tx_buf, tx_len, NULL, 0);
+}
+EXPORT_SYMBOL(ifx_ssc_tx);
+
+int
+ifx_ssc_rx (char *rx_buf, u32 rx_len)
+{
+ return ssc_session(NULL, 0, rx_buf, rx_len);
+}
+EXPORT_SYMBOL(ifx_ssc_rx);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("danube ssc driver");
+
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2006 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <asm/uaccess.h>
+#include <linux/errno.h>
+#include <linux/proc_fs.h>
+#include <linux/ioctl.h>
+#include <linux/module.h>
+#include <asm-mips/danube/danube_wdt.h>
+#include <asm-mips/danube/danube.h>
+
+
+// TODO remove magic numbers and weirdo macros
+
+extern unsigned int danube_get_fpi_hz (void);
+
+static int danube_wdt_inuse = 0;
+static int danube_wdt_major = 0;
+
+int
+danube_wdt_enable (unsigned int timeout)
+{
+ unsigned int wdt_cr = 0;
+ unsigned int wdt_reload = 0;
+ unsigned int wdt_clkdiv, wdt_pwl, ffpi;
+ int retval = 0;
+
+ /* clock divider & prewarning limit */
+ wdt_clkdiv = 1 << (7 * DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR)));
+ wdt_pwl = 0x8000 >> DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR));
+
+ //TODO
+ printk("WARNING FUNCTION CALL MISSING!!!");
+ //ffpi = cgu_get_io_region_clock();
+ printk("cpu clock = %d\n", ffpi);
+
+ /* caculate reload value */
+ wdt_reload = (timeout * (ffpi / wdt_clkdiv)) + wdt_pwl;
+
+ printk("wdt_pwl=0x%x, wdt_clkdiv=%d, ffpi=%d, wdt_reload = 0x%x\n",
+ wdt_pwl, wdt_clkdiv, ffpi, wdt_reload);
+
+ if (wdt_reload > 0xFFFF)
+ {
+ printk ("timeout too large %d\n", timeout);
+ retval = -EINVAL;
+ goto out;
+ }
+
+ /* Write first part of password access */
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
+
+ wdt_cr = readl(DANUBE_BIU_WDT_CR);
+ wdt_cr &= (!DANUBE_BIU_WDT_CR_PW_SET(0xff) &
+ !DANUBE_BIU_WDT_CR_PWL_SET(0x3) &
+ !DANUBE_BIU_WDT_CR_CLKDIV_SET(0x3) &
+ !DANUBE_BIU_WDT_CR_RELOAD_SET(0xffff));
+
+ wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) |
+ DANUBE_BIU_WDT_CR_PWL_SET(DANUBE_BIU_WDT_CR_PWL_GET(readl(DANUBE_BIU_WDT_CR))) |
+ DANUBE_BIU_WDT_CR_CLKDIV_SET(DANUBE_BIU_WDT_CR_CLKDIV_GET(readl(DANUBE_BIU_WDT_CR))) |
+ DANUBE_BIU_WDT_CR_RELOAD_SET(wdt_reload) |
+ DANUBE_BIU_WDT_CR_GEN);
+
+ writel(wdt_cr, DANUBE_BIU_WDT_CR);
+
+ printk("watchdog enabled\n");
+
+out:
+ return retval;
+}
+
+void
+danube_wdt_disable (void)
+{
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2), DANUBE_BIU_WDT_CR);
+
+ printk("watchdog disabled\n");
+}
+
+/* passed LPEN or DSEN */
+void
+danube_wdt_enable_feature (int en, int type)
+{
+ unsigned int wdt_cr = 0;
+
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
+
+ wdt_cr = readl(DANUBE_BIU_WDT_CR);
+
+ if (en)
+ {
+ wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff));
+ wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | type);
+ } else {
+ wdt_cr &= (~DANUBE_BIU_WDT_CR_PW_SET(0xff) & ~type);
+ wdt_cr |= DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2);
+ }
+
+ writel(wdt_cr, DANUBE_BIU_WDT_CR);
+}
+
+void
+danube_wdt_prewarning_limit (int pwl)
+{
+ unsigned int wdt_cr = 0;
+
+ wdt_cr = readl(DANUBE_BIU_WDT_CR);
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
+
+ wdt_cr &= 0xf300ffff;
+ wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_PWL_SET(pwl));
+
+ /* Set reload value in second password access */
+ writel(wdt_cr, DANUBE_BIU_WDT_CR);
+}
+
+void
+danube_wdt_set_clkdiv (int clkdiv)
+{
+ unsigned int wdt_cr = 0;
+
+ wdt_cr = readl(DANUBE_BIU_WDT_CR);
+ writel(DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW1), DANUBE_BIU_WDT_CR);
+
+ wdt_cr &= 0xfc00ffff;
+ wdt_cr |= (DANUBE_BIU_WDT_CR_PW_SET(DANUBE_WDT_PW2) | DANUBE_BIU_WDT_CR_CLKDIV_SET(clkdiv));
+
+ /* Set reload value in second password access */
+ writel(wdt_cr, DANUBE_BIU_WDT_CR);
+}
+
+static int
+danube_wdt_ioctl (struct inode *inode, struct file *file, unsigned int cmd,
+ unsigned long arg)
+{
+ int result = 0;
+ static int timeout = -1;
+ unsigned int user_arg;
+
+ if ((cmd != DANUBE_WDT_IOC_STOP) && (cmd != DANUBE_WDT_IOC_PING) && (cmd != DANUBE_WDT_IOC_GET_STATUS))
+ {
+ if (copy_from_user((void *) &user_arg, (void *) arg, sizeof (int))){
+ result = -EINVAL;
+ goto out;
+ }
+ }
+
+ switch (cmd)
+ {
+ case DANUBE_WDT_IOC_START:
+ if ((result = danube_wdt_enable(user_arg)) < 0)
+ timeout = -1;
+ else
+ timeout = user_arg;
+ break;
+
+ case DANUBE_WDT_IOC_STOP:
+ printk("disable watch dog timer\n");
+ danube_wdt_disable();
+ break;
+
+ case DANUBE_WDT_IOC_PING:
+ if (timeout < 0)
+ result = -EIO;
+ else
+ result = danube_wdt_enable(timeout);
+ break;
+
+ case DANUBE_WDT_IOC_GET_STATUS:
+ user_arg = readl(DANUBE_BIU_WDT_SR);
+ copy_to_user((int*)arg, (int*)&user_arg, sizeof(int));
+ break;
+
+ case DANUBE_WDT_IOC_SET_PWL:
+ danube_wdt_prewarning_limit(user_arg);
+ break;
+
+ case DANUBE_WDT_IOC_SET_DSEN:
+ danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_DSEN);
+ break;
+
+ case DANUBE_WDT_IOC_SET_LPEN:
+ danube_wdt_enable_feature(user_arg, DANUBE_BIU_WDT_CR_LPEN);
+ break;
+
+ case DANUBE_WDT_IOC_SET_CLKDIV:
+ danube_wdt_set_clkdiv(user_arg);
+ break;
+
+ default:
+ printk("unknown watchdog iotcl\n");
+ }
+
+out:
+ return result;
+}
+
+static int
+danube_wdt_open (struct inode *inode, struct file *file)
+{
+ if (danube_wdt_inuse)
+ return -EBUSY;
+
+ danube_wdt_inuse = 1;
+
+ return 0;
+}
+
+static int
+danube_wdt_release (struct inode *inode, struct file *file)
+{
+ danube_wdt_inuse = 0;
+
+ return 0;
+}
+
+int
+danube_wdt_register_proc_read (char *buf, char **start, off_t offset, int count,
+ int *eof, void *data)
+{
+ int len = 0;
+
+ len += sprintf (buf + len, "DANUBE_BIU_WDT_PROC_READ\n");
+ len += sprintf (buf + len, "DANUBE_BIU_WDT_CR(0x%08x) : 0x%08x\n",
+ (unsigned int)DANUBE_BIU_WDT_CR, readl(DANUBE_BIU_WDT_CR));
+ len += sprintf (buf + len, "DANUBE_BIU_WDT_SR(0x%08x) : 0x%08x\n",
+ (unsigned int)DANUBE_BIU_WDT_SR, readl(DANUBE_BIU_WDT_SR));
+
+ *eof = 1;
+
+ return len;
+}
+
+static struct file_operations wdt_fops = {
+ .owner = THIS_MODULE,
+ .ioctl = danube_wdt_ioctl,
+ .open = danube_wdt_open,
+ .release = danube_wdt_release,
+};
+
+int __init
+danube_wdt_init_module (void)
+{
+ danube_wdt_major = register_chrdev(0, "wdt", &wdt_fops);
+
+ if (danube_wdt_major < 0)
+ {
+ printk("cannot register watchdog device\n");
+
+ return -EINVAL;
+ }
+
+ create_proc_read_entry("danube_wdt", 0, NULL, danube_wdt_register_proc_read, NULL);
+
+ printk("danube watchdog loaded\n");
+
+ return 0;
+}
+
+void
+danube_wdt_cleanup_module (void)
+{
+ unregister_chrdev(danube_wdt_major, "wdt");
+ remove_proc_entry("danube_wdt", NULL);
+}
+
+module_init(danube_wdt_init_module);
+module_exit(danube_wdt_cleanup_module);
--- /dev/null
+/*
+ * Driver for DANUBE flashmap
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2004 Liu Peng Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/kernel.h>
+#include <asm/io.h>
+
+#include <linux/init.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/map.h>
+#include <linux/mtd/partitions.h>
+#include <linux/mtd/cfi.h>
+#include <asm/danube/danube.h>
+#include <linux/magic.h>
+
+static struct map_info
+danube_map = {
+ .name = "DANUBE_FLASH",
+ .bankwidth = 2,
+ .size = 0x400000,
+};
+
+static map_word
+danube_read16 (struct map_info * map, unsigned long adr)
+{
+ map_word temp;
+
+ adr ^= 2;
+ temp.x[0] = *((__u16 *) (map->virt + adr));
+
+ return temp;
+}
+
+static void
+danube_write16 (struct map_info *map, map_word d, unsigned long adr)
+{
+ adr ^= 2;
+ *((__u16 *) (map->virt + adr)) = d.x[0];
+}
+
+void
+danube_copy_from (struct map_info *map, void *to, unsigned long from, ssize_t len)
+{
+ u8 *p;
+ u8 *to_8;
+
+ from = (unsigned long) (from + map->virt);
+ p = (u8 *) from;
+ to_8 = (u8 *) to;
+ while(len--){
+ *to_8++ = *p++;
+ }
+}
+
+void
+danube_copy_to (struct map_info *map, unsigned long to, const void *from, ssize_t len)
+{
+ u8 *p = (u8*) from;
+ u8 *to_8;
+
+ to += (unsigned long) map->virt;
+ to_8 = (u8*)to;
+ while(len--){
+ *p++ = *to_8++;
+ }
+}
+
+static struct mtd_partition
+danube_partitions[4] = {
+ {
+ name:"U-Boot",
+ offset:0x00000000,
+ size:0x00020000,
+ },
+ {
+ name:"U-Boot-Env",
+ offset:0x00020000,
+ size:0x00010000,
+ },
+ {
+ name:"kernel",
+ offset:0x00030000,
+ size:0x0,
+ },
+ {
+ name:"rootfs",
+ offset:0x0,
+ size:0x0,
+ },
+};
+
+#define DANUBE_FLASH_START 0x10000000
+#define DANUBE_FLASH_MAX 0x2000000
+
+int
+find_uImage_size (unsigned long start_offset){
+ unsigned long temp;
+
+ danube_copy_from(&danube_map, &temp, start_offset + 12, 4);
+ printk("kernel size is %ld \n", temp + 0x40);
+ return temp + 0x40;
+}
+
+int
+detect_squashfs_partition (unsigned long start_offset){
+ unsigned long temp;
+
+ danube_copy_from(&danube_map, &temp, start_offset, 4);
+
+ return (temp == SQUASHFS_MAGIC);
+}
+
+int __init
+init_danube_mtd (void)
+{
+ struct mtd_info *danube_mtd = NULL;
+ struct mtd_partition *parts = NULL;
+ unsigned long uimage_size;
+
+ writel(0x1d7ff, DANUBE_EBU_BUSCON0);
+
+ danube_map.read = danube_read16;
+ danube_map.write = danube_write16;
+ danube_map.copy_from = danube_copy_from;
+ danube_map.copy_to = danube_copy_to;
+
+ danube_map.phys = DANUBE_FLASH_START;
+ danube_map.virt = ioremap_nocache(DANUBE_FLASH_START, DANUBE_FLASH_MAX);
+ danube_map.size = DANUBE_FLASH_MAX;
+ if (!danube_map.virt) {
+ printk(KERN_WARNING "Failed to ioremap!\n");
+ return -EIO;
+ }
+
+ danube_mtd = (struct mtd_info *) do_map_probe("cfi_probe", &danube_map);
+ if (!danube_mtd) {
+ iounmap(danube_map.virt);
+ printk("probing failed\n");
+ return -ENXIO;
+ }
+
+ danube_mtd->owner = THIS_MODULE;
+
+ uimage_size = find_uImage_size(danube_partitions[2].offset);
+
+ if(detect_squashfs_partition(danube_partitions[2].offset + uimage_size)){
+ printk("Found a squashfs following the uImage\n");
+ } else {
+ uimage_size &= ~0xffff;
+ uimage_size += 0x10000;
+ }
+
+ danube_partitions[2].size = uimage_size;
+ danube_partitions[3].offset = danube_partitions[2].offset + danube_partitions[2].size;
+ danube_partitions[3].size = ((danube_mtd->size >> 20) * 1024 * 1024) - danube_partitions[3].offset;
+
+ parts = &danube_partitions[0];
+ add_mtd_partitions(danube_mtd, parts, 4);
+
+ printk("Added danube flash with %dMB\n", danube_mtd->size >> 20);
+ return 0;
+}
+
+static void
+__exit
+cleanup_danube_mtd (void)
+{
+}
+
+module_init (init_danube_mtd);
+module_exit (cleanup_danube_mtd);
+
+MODULE_LICENSE ("GPL");
+MODULE_AUTHOR ("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION ("MTD map driver for DANUBE boards");
--- /dev/null
+/*
+ * drivers/net/danube_mii0.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 Infineon
+ *
+ * Rewrite of Infineon Danube code, thanks to infineon for the support,
+ * software and hardware
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <asm/uaccess.h>
+#include <linux/in.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ip.h>
+#include <linux/tcp.h>
+#include <linux/skbuff.h>
+#include <linux/mm.h>
+#include <linux/ethtool.h>
+#include <asm/checksum.h>
+#include <linux/init.h>
+#include <asm/delay.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_mii0.h>
+#include <asm/danube/danube_dma.h>
+#include <asm/danube/danube_pmu.h>
+
+static struct net_device danube_mii0_dev;
+static unsigned char u_boot_ethaddr[MAX_ADDR_LEN];
+
+void
+danube_write_mdio (u32 phy_addr, u32 phy_reg, u16 phy_data)
+{
+ u32 val = MDIO_ACC_REQUEST |
+ ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
+ ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET) |
+ phy_data;
+
+ while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST);
+ writel(val, DANUBE_PPE32_MDIO_ACC);
+}
+
+unsigned short
+danube_read_mdio (u32 phy_addr, u32 phy_reg)
+{
+ u32 val = MDIO_ACC_REQUEST | MDIO_ACC_READ |
+ ((phy_addr & MDIO_ACC_ADDR_MASK) << MDIO_ACC_ADDR_OFFSET) |
+ ((phy_reg & MDIO_ACC_REG_MASK) << MDIO_ACC_REG_OFFSET);
+
+ writel(val, DANUBE_PPE32_MDIO_ACC);
+ while (readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_REQUEST){};
+ val = readl(DANUBE_PPE32_MDIO_ACC) & MDIO_ACC_VAL_MASK;
+
+ return val;
+}
+
+int
+danube_switch_open (struct net_device *dev)
+{
+ struct switch_priv* priv = (struct switch_priv*)dev->priv;
+ struct dma_device_info* dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->max_rx_chan_num; i++)
+ {
+ if ((dma_dev->rx_chan[i])->control == DANUBE_DMA_CH_ON)
+ (dma_dev->rx_chan[i])->open(dma_dev->rx_chan[i]);
+ }
+
+ netif_start_queue(dev);
+
+ return 0;
+}
+
+int
+switch_release (struct net_device *dev){
+ struct switch_priv* priv = (struct switch_priv*)dev->priv;
+ struct dma_device_info* dma_dev = priv->dma_device;
+ int i;
+
+ for (i = 0; i < dma_dev->max_rx_chan_num; i++)
+ dma_dev->rx_chan[i]->close(dma_dev->rx_chan[i]);
+
+ netif_stop_queue(dev);
+
+ return 0;
+}
+
+int
+switch_hw_receive (struct net_device* dev,struct dma_device_info* dma_dev)
+{
+ struct switch_priv *priv = (struct switch_priv*)dev->priv;
+ unsigned char* buf = NULL;
+ struct sk_buff *skb = NULL;
+ int len = 0;
+
+ len = dma_device_read(dma_dev, &buf, (void**)&skb);
+
+ if (len >= ETHERNET_PACKET_DMA_BUFFER_SIZE)
+ {
+ printk("packet too large %d\n",len);
+ goto switch_hw_receive_err_exit;
+ }
+
+ /* remove CRC */
+ len -= 4;
+ if (skb == NULL )
+ {
+ printk("cannot restore pointer\n");
+ goto switch_hw_receive_err_exit;
+ }
+
+ if (len > (skb->end - skb->tail))
+ {
+ printk("BUG, len:%d end:%p tail:%p\n", (len+4), skb->end, skb->tail);
+ goto switch_hw_receive_err_exit;
+ }
+
+ skb_put(skb, len);
+ skb->dev = dev;
+ skb->protocol = eth_type_trans(skb, dev);
+ netif_rx(skb);
+
+ priv->stats.rx_packets++;
+ priv->stats.rx_bytes += len;
+
+ return 0;
+
+switch_hw_receive_err_exit:
+ if (len == 0)
+ {
+ if(skb)
+ dev_kfree_skb_any(skb);
+ priv->stats.rx_errors++;
+ priv->stats.rx_dropped++;
+
+ return -EIO;
+ } else {
+ return len;
+ }
+}
+
+int
+switch_hw_tx (char *buf, int len, struct net_device *dev)
+{
+ int ret = 0;
+ struct switch_priv *priv = dev->priv;
+ struct dma_device_info* dma_dev = priv->dma_device;
+
+ ret = dma_device_write(dma_dev, buf, len, priv->skb);
+
+ return ret;
+}
+
+int
+switch_tx (struct sk_buff *skb, struct net_device *dev)
+{
+ int len;
+ char *data;
+ struct switch_priv *priv = dev->priv;
+ struct dma_device_info* dma_dev = priv->dma_device;
+
+ len = skb->len < ETH_ZLEN ? ETH_ZLEN : skb->len;
+ data = skb->data;
+ priv->skb = skb;
+ dev->trans_start = jiffies;
+ // TODO we got more than 1 dma channel, so we should do something intelligent
+ // here to select one
+ dma_dev->current_tx_chan = 0;
+
+ wmb();
+
+ if (switch_hw_tx(data, len, dev) != len)
+ {
+ dev_kfree_skb_any(skb);
+ priv->stats.tx_errors++;
+ priv->stats.tx_dropped++;
+ } else {
+ priv->stats.tx_packets++;
+ priv->stats.tx_bytes+=len;
+ }
+
+ return 0;
+}
+
+void
+switch_tx_timeout (struct net_device *dev)
+{
+ int i;
+ struct switch_priv* priv = (struct switch_priv*)dev->priv;
+
+ priv->stats.tx_errors++;
+
+ for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
+ {
+ priv->dma_device->tx_chan[i]->disable_irq(priv->dma_device->tx_chan[i]);
+ }
+
+ netif_wake_queue(dev);
+
+ return;
+}
+
+int
+dma_intr_handler (struct dma_device_info* dma_dev, int status)
+{
+ int i;
+
+ switch (status)
+ {
+ case RCV_INT:
+ switch_hw_receive(&danube_mii0_dev, dma_dev);
+ break;
+
+ case TX_BUF_FULL_INT:
+ printk("tx buffer full\n");
+ netif_stop_queue(&danube_mii0_dev);
+ for (i = 0; i < dma_dev->max_tx_chan_num; i++)
+ {
+ if ((dma_dev->tx_chan[i])->control==DANUBE_DMA_CH_ON)
+ dma_dev->tx_chan[i]->enable_irq(dma_dev->tx_chan[i]);
+ }
+ break;
+
+ case TRANSMIT_CPT_INT:
+ for (i = 0; i < dma_dev->max_tx_chan_num; i++)
+ dma_dev->tx_chan[i]->disable_irq(dma_dev->tx_chan[i]);
+
+ netif_wake_queue(&danube_mii0_dev);
+ break;
+ }
+
+ return 0;
+}
+
+unsigned char*
+danube_etop_dma_buffer_alloc (int len, int *byte_offset, void **opt)
+{
+ unsigned char *buffer = NULL;
+ struct sk_buff *skb = NULL;
+
+ skb = dev_alloc_skb(ETHERNET_PACKET_DMA_BUFFER_SIZE);
+ if (skb == NULL)
+ return NULL;
+
+ buffer = (unsigned char*)(skb->data);
+ skb_reserve(skb, 2);
+ *(int*)opt = (int)skb;
+ *byte_offset = 2;
+
+ return buffer;
+}
+
+void
+danube_etop_dma_buffer_free (unsigned char *dataptr, void *opt)
+{
+ struct sk_buff *skb = NULL;
+
+ if(opt == NULL)
+ {
+ kfree(dataptr);
+ } else {
+ skb = (struct sk_buff*)opt;
+ dev_kfree_skb_any(skb);
+ }
+}
+
+static struct net_device_stats*
+danube_get_stats (struct net_device *dev)
+{
+ return (struct net_device_stats *)dev->priv;
+}
+
+static int
+switch_init (struct net_device *dev)
+{
+ u64 retval = 0;
+ int i;
+ struct switch_priv *priv;
+
+ ether_setup(dev);
+
+ printk("%s up\n", dev->name);
+
+ dev->open = danube_switch_open;
+ dev->stop = switch_release;
+ dev->hard_start_xmit = switch_tx;
+ dev->get_stats = danube_get_stats;
+ dev->tx_timeout = switch_tx_timeout;
+ dev->watchdog_timeo = 10 * HZ;
+ dev->priv = kmalloc(sizeof(struct switch_priv), GFP_KERNEL);
+
+ if (dev->priv == NULL)
+ return -ENOMEM;
+
+ memset(dev->priv, 0, sizeof(struct switch_priv));
+ priv = dev->priv;
+
+ priv->dma_device = dma_device_reserve("PPE");
+
+ if (!priv->dma_device){
+ BUG();
+ return -ENODEV;
+ }
+
+ priv->dma_device->buffer_alloc = &danube_etop_dma_buffer_alloc;
+ priv->dma_device->buffer_free = &danube_etop_dma_buffer_free;
+ priv->dma_device->intr_handler = &dma_intr_handler;
+ priv->dma_device->max_rx_chan_num = 4;
+
+ for (i = 0; i < priv->dma_device->max_rx_chan_num; i++)
+ {
+ priv->dma_device->rx_chan[i]->packet_size = ETHERNET_PACKET_DMA_BUFFER_SIZE;
+ priv->dma_device->rx_chan[i]->control = DANUBE_DMA_CH_ON;
+ }
+
+ for (i = 0; i < priv->dma_device->max_tx_chan_num; i++)
+ {
+ if(i == 0)
+ priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_ON;
+ else
+ priv->dma_device->tx_chan[i]->control = DANUBE_DMA_CH_OFF;
+ }
+
+ dma_device_register(priv->dma_device);
+
+ /*read the mac address from the mac table and put them into the mac table.*/
+ for (i = 0; i < 6; i++)
+ {
+ retval += u_boot_ethaddr[i];
+ }
+
+ //TODO
+ /* ethaddr not set in u-boot ? */
+ if (retval == 0)
+ {
+ printk("use default MAC address\n");
+ dev->dev_addr[0] = 0x00;
+ dev->dev_addr[1] = 0x11;
+ dev->dev_addr[2] = 0x22;
+ dev->dev_addr[3] = 0x33;
+ dev->dev_addr[4] = 0x44;
+ dev->dev_addr[5] = 0x55;
+ } else {
+ for (i = 0; i < 6; i++)
+ dev->dev_addr[i] = u_boot_ethaddr[i];
+ }
+
+ return 0;
+}
+
+static void
+danube_sw_chip_init (int mode)
+{
+ danube_pmu_enable(DANUBE_PMU_PWDCR_DMA);
+ danube_pmu_enable(DANUBE_PMU_PWDCR_PPE);
+
+ if(mode == REV_MII_MODE)
+ writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_REVERSE, DANUBE_PPE32_CFG);
+ else if(mode == MII_MODE)
+ writel((readl(DANUBE_PPE32_CFG) & PPE32_MII_MASK) | PPE32_MII_NORMAL, DANUBE_PPE32_CFG);
+
+ writel(PPE32_PLEN_UNDER | PPE32_PLEN_OVER, DANUBE_PPE32_IG_PLEN_CTRL);
+
+ writel(PPE32_CGEN, DANUBE_PPE32_ENET_MAC_CFG);
+
+ wmb();
+}
+
+int __init
+switch_init_module(void)
+{
+ int result = 0;
+
+ danube_mii0_dev.init = switch_init;
+
+ strcpy(danube_mii0_dev.name, "eth%d");
+ SET_MODULE_OWNER(dev);
+
+ result = register_netdev(&danube_mii0_dev);
+ if (result)
+ {
+ printk("error %i registering device \"%s\"\n", result, danube_mii0_dev.name);
+ goto out;
+ }
+
+ /* danube eval kit connects the phy/switch in REV mode */
+ danube_sw_chip_init(REV_MII_MODE);
+ printk("danube MAC driver loaded!\n");
+
+out:
+ return result;
+}
+
+static void __exit
+switch_cleanup(void)
+{
+ struct switch_priv *priv = (struct switch_priv*)danube_mii0_dev.priv;
+
+ printk("danube_mii0 cleanup\n");
+
+ dma_device_unregister(priv->dma_device);
+ dma_device_release(priv->dma_device);
+ kfree(priv->dma_device);
+ kfree(danube_mii0_dev.priv);
+ unregister_netdev(&danube_mii0_dev);
+
+ return;
+}
+
+module_init(switch_init_module);
+module_exit(switch_cleanup);
--- /dev/null
+/*
+ * Driver for DANUBEASC serial ports
+ *
+ * Based on drivers/char/serial.c, by Linus Torvalds, Theodore Ts'o.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2004 Infineon IFAP DC COM CPE
+ * Copyright (C) 2007 Felix Fietkau <nbd@openwrt.org>
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ */
+
+#include <linux/module.h>
+#include <linux/errno.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/major.h>
+#include <linux/string.h>
+#include <linux/fcntl.h>
+#include <linux/ptrace.h>
+#include <linux/ioport.h>
+#include <linux/mm.h>
+#include <linux/slab.h>
+#include <linux/init.h>
+#include <linux/circ_buf.h>
+#include <linux/serial.h>
+#include <linux/serial_core.h>
+#include <linux/console.h>
+#include <linux/sysrq.h>
+#include <linux/irq.h>
+
+#include <asm/system.h>
+#include <asm/io.h>
+#include <asm/uaccess.h>
+#include <asm/bitops.h>
+#include <asm/danube/danube.h>
+#include <asm/danube/danube_irq.h>
+#include <asm/danube/danube_serial.h>
+
+#define PORT_DANUBEASC 111
+
+#include <linux/serial_core.h>
+
+#define UART_DUMMY_UER_RX 1
+
+static void danubeasc_tx_chars(struct uart_port *port);
+extern void prom_printf(const char * fmt, ...);
+static struct uart_port danubeasc_port;
+static struct uart_driver danubeasc_reg;
+static unsigned int uartclk = 0;
+extern unsigned int danube_get_fpi_hz(void);
+
+static void
+danubeasc_stop_tx (struct uart_port *port)
+{
+ /* fifo underrun shuts up after firing once */
+ return;
+}
+
+static void
+danubeasc_start_tx (struct uart_port *port)
+{
+ unsigned long flags;
+
+ local_irq_save(flags);
+ danubeasc_tx_chars(port);
+ local_irq_restore(flags);
+
+ return;
+}
+
+static void
+danubeasc_stop_rx (struct uart_port *port)
+{
+ /* clear the RX enable bit */
+ writel(ASCWHBSTATE_CLRREN, DANUBE_ASC1_WHBSTATE);
+}
+
+static void
+danubeasc_enable_ms (struct uart_port *port)
+{
+ /* no modem signals */
+ return;
+}
+
+static void
+danubeasc_rx_chars (struct uart_port *port)
+{
+ struct tty_struct *tty = port->info->tty;
+ unsigned int ch = 0, rsr = 0, fifocnt;
+
+ fifocnt = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_RXFFLMASK;
+ while (fifocnt--)
+ {
+ u8 flag = TTY_NORMAL;
+ ch = readl(DANUBE_ASC1_RBUF);
+ rsr = (readl(DANUBE_ASC1_STATE) & ASCSTATE_ANY) | UART_DUMMY_UER_RX;
+ tty_flip_buffer_push(tty);
+ port->icount.rx++;
+
+ /*
+ * Note that the error handling code is
+ * out of the main execution path
+ */
+ if (rsr & ASCSTATE_ANY) {
+ if (rsr & ASCSTATE_PE) {
+ port->icount.parity++;
+ writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE, DANUBE_ASC1_WHBSTATE);
+ } else if (rsr & ASCSTATE_FE) {
+ port->icount.frame++;
+ writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRFE, DANUBE_ASC1_WHBSTATE);
+ }
+ if (rsr & ASCSTATE_ROE) {
+ port->icount.overrun++;
+ writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
+ }
+
+ rsr &= port->read_status_mask;
+
+ if (rsr & ASCSTATE_PE)
+ flag = TTY_PARITY;
+ else if (rsr & ASCSTATE_FE)
+ flag = TTY_FRAME;
+ }
+
+ if ((rsr & port->ignore_status_mask) == 0)
+ tty_insert_flip_char(tty, ch, flag);
+
+ if (rsr & ASCSTATE_ROE)
+ /*
+ * Overrun is special, since it's reported
+ * immediately, and doesn't affect the current
+ * character
+ */
+ tty_insert_flip_char(tty, 0, TTY_OVERRUN);
+ }
+ if (ch != 0)
+ tty_flip_buffer_push(tty);
+
+ return;
+}
+
+
+static void
+danubeasc_tx_chars (struct uart_port *port)
+{
+ struct circ_buf *xmit = &port->info->xmit;
+
+ if (uart_tx_stopped(port)) {
+ danubeasc_stop_tx(port);
+ return;
+ }
+
+ while(((readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF) != DANUBEASC_TXFIFO_FULL)
+ {
+ if (port->x_char) {
+ writel(port->x_char, DANUBE_ASC1_TBUF);
+ port->icount.tx++;
+ port->x_char = 0;
+ continue;
+ }
+
+ if (uart_circ_empty(xmit))
+ break;
+
+ writel(port->info->xmit.buf[port->info->xmit.tail], DANUBE_ASC1_TBUF);
+ xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
+ port->icount.tx++;
+ }
+
+ if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
+ uart_write_wakeup(port);
+}
+
+static irqreturn_t
+danubeasc_tx_int (int irq, void *port)
+{
+ writel(ASC_IRNCR_TIR, DANUBE_ASC1_IRNCR);
+ danubeasc_start_tx(port);
+ mask_and_ack_danube_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+danubeasc_er_int (int irq, void *port)
+{
+ /* clear any pending interrupts */
+ writel(readl(DANUBE_ASC1_WHBSTATE) | ASCWHBSTATE_CLRPE |
+ ASCWHBSTATE_CLRFE | ASCWHBSTATE_CLRROE, DANUBE_ASC1_WHBSTATE);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t
+danubeasc_rx_int (int irq, void *port)
+{
+ writel(ASC_IRNCR_RIR, DANUBE_ASC1_IRNCR);
+ danubeasc_rx_chars((struct uart_port *) port);
+ mask_and_ack_danube_irq(irq);
+
+ return IRQ_HANDLED;
+}
+
+static unsigned int
+danubeasc_tx_empty (struct uart_port *port)
+{
+ int status;
+
+ status = readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK;
+
+ return status ? 0 : TIOCSER_TEMT;
+}
+
+static unsigned int
+danubeasc_get_mctrl (struct uart_port *port)
+{
+ return TIOCM_CTS | TIOCM_CAR | TIOCM_DSR;
+}
+
+static void
+danubeasc_set_mctrl (struct uart_port *port, u_int mctrl)
+{
+ return;
+}
+
+static void
+danubeasc_break_ctl (struct uart_port *port, int break_state)
+{
+ return;
+}
+
+static void
+danubeasc1_hw_init (void)
+{
+ /* this setup was probably already done in ROM/u-boot but we do it again*/
+ /* TODO: GPIO pins are multifunction */
+ writel(readl(DANUBE_ASC1_CLC) & ~DANUBE_ASC1_CLC_DISS, DANUBE_ASC1_CLC);
+ writel((readl(DANUBE_ASC1_CLC) & ~ASCCLC_RMCMASK) | (1 << ASCCLC_RMCOFFSET), DANUBE_ASC1_CLC);
+ writel(0, DANUBE_ASC1_PISEL);
+ writel(((DANUBEASC_TXFIFO_FL << ASCTXFCON_TXFITLOFF) &
+ ASCTXFCON_TXFITLMASK) | ASCTXFCON_TXFEN | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
+ writel(((DANUBEASC_RXFIFO_FL << ASCRXFCON_RXFITLOFF) &
+ ASCRXFCON_RXFITLMASK) | ASCRXFCON_RXFEN | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
+ wmb ();
+
+ /*framing, overrun, enable */
+ writel(readl(DANUBE_ASC1_CON) | ASCCON_M_8ASYNC | ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN,
+ DANUBE_ASC1_CON);
+}
+
+static int
+danubeasc_startup (struct uart_port *port)
+{
+ unsigned long flags;
+ int retval;
+
+ /* this assumes: CON.BRS = CON.FDE = 0 */
+ if (uartclk == 0)
+ uartclk = danube_get_fpi_hz();
+
+ danubeasc_port.uartclk = uartclk;
+
+ danubeasc1_hw_init();
+
+ local_irq_save(flags);
+
+ retval = request_irq(DANUBEASC1_RIR, danubeasc_rx_int, IRQF_DISABLED, "asc_rx", port);
+ if (retval){
+ printk("failed to request danubeasc_rx_int\n");
+ return retval;
+ }
+
+ retval = request_irq(DANUBEASC1_TIR, danubeasc_tx_int, IRQF_DISABLED, "asc_tx", port);
+ if (retval){
+ printk("failed to request danubeasc_tx_int\n");
+ goto err1;
+ }
+
+ retval = request_irq(DANUBEASC1_EIR, danubeasc_er_int, IRQF_DISABLED, "asc_er", port);
+ if (retval){
+ printk("failed to request danubeasc_er_int\n");
+ goto err2;
+ }
+
+ writel(ASC_IRNREN_RX_BUF | ASC_IRNREN_TX_BUF | ASC_IRNREN_ERR | ASC_IRNREN_TX,
+ DANUBE_ASC1_IRNREN);
+
+ local_irq_restore(flags);
+
+ return 0;
+
+err2:
+ free_irq(DANUBEASC1_TIR, port);
+
+err1:
+ free_irq(DANUBEASC1_RIR, port);
+ local_irq_restore(flags);
+
+ return retval;
+}
+
+static void
+danubeasc_shutdown (struct uart_port *port)
+{
+ free_irq(DANUBEASC1_RIR, port);
+ free_irq(DANUBEASC1_TIR, port);
+ free_irq(DANUBEASC1_EIR, port);
+ /*
+ * disable the baudrate generator to disable the ASC
+ */
+ writel(0, DANUBE_ASC1_CON);
+
+ /* flush and then disable the fifos */
+ writel(readl(DANUBE_ASC1_RXFCON) | ASCRXFCON_RXFFLU, DANUBE_ASC1_RXFCON);
+ writel(readl(DANUBE_ASC1_RXFCON) & ~ASCRXFCON_RXFEN, DANUBE_ASC1_RXFCON);
+ writel(readl(DANUBE_ASC1_TXFCON) | ASCTXFCON_TXFFLU, DANUBE_ASC1_TXFCON);
+ writel(readl(DANUBE_ASC1_TXFCON) & ~ASCTXFCON_TXFEN, DANUBE_ASC1_TXFCON);
+}
+
+static void danubeasc_set_termios(struct uart_port *port, struct ktermios *new, struct ktermios *old)
+{
+ unsigned int cflag;
+ unsigned int iflag;
+ unsigned int quot;
+ unsigned int baud;
+ unsigned int con = 0;
+ unsigned long flags;
+
+ cflag = new->c_cflag;
+ iflag = new->c_iflag;
+
+ /* byte size and parity */
+ switch (cflag & CSIZE) {
+ case CS7:
+ con = ASCCON_M_7ASYNC;
+ break;
+
+ case CS5:
+ case CS6:
+ default:
+ con = ASCCON_M_8ASYNC;
+ break;
+ }
+
+ if (cflag & CSTOPB)
+ con |= ASCCON_STP;
+
+ if (cflag & PARENB) {
+ if (!(cflag & PARODD))
+ con &= ~ASCCON_ODD;
+ else
+ con |= ASCCON_ODD;
+ }
+
+ port->read_status_mask = ASCSTATE_ROE;
+ if (iflag & INPCK)
+ port->read_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+ port->ignore_status_mask = 0;
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCSTATE_FE | ASCSTATE_PE;
+
+ if (iflag & IGNBRK) {
+ /*
+ * If we're ignoring parity and break indicators,
+ * ignore overruns too (for real raw support).
+ */
+ if (iflag & IGNPAR)
+ port->ignore_status_mask |= ASCSTATE_ROE;
+ }
+
+ if ((cflag & CREAD) == 0)
+ port->ignore_status_mask |= UART_DUMMY_UER_RX;
+
+ /* set error signals - framing, parity and overrun, enable receiver */
+ con |= ASCCON_FEN | ASCCON_TOEN | ASCCON_ROEN;
+
+ local_irq_save(flags);
+
+ /* set up CON */
+ writel(readl(DANUBE_ASC1_CON) | con, DANUBE_ASC1_CON);
+
+ /* Set baud rate - take a divider of 2 into account */
+ baud = uart_get_baud_rate(port, new, old, 0, port->uartclk / 16);
+ quot = uart_get_divisor(port, baud);
+ quot = quot / 2 - 1;
+
+ /* disable the baudrate generator */
+ writel(readl(DANUBE_ASC1_CON) & ~ASCCON_R, DANUBE_ASC1_CON);
+
+ /* make sure the fractional divider is off */
+ writel(readl(DANUBE_ASC1_CON) & ~ASCCON_FDE, DANUBE_ASC1_CON);
+
+ /* set up to use divisor of 2 */
+ writel(readl(DANUBE_ASC1_CON) & ~ASCCON_BRS, DANUBE_ASC1_CON);
+
+ /* now we can write the new baudrate into the register */
+ writel(quot, DANUBE_ASC1_BG);
+
+ /* turn the baudrate generator back on */
+ writel(readl(DANUBE_ASC1_CON) | ASCCON_R, DANUBE_ASC1_CON);
+
+ /* enable rx */
+ writel(ASCWHBSTATE_SETREN, DANUBE_ASC1_WHBSTATE);
+
+ local_irq_restore(flags);
+}
+
+static const char*
+danubeasc_type (struct uart_port *port)
+{
+ return port->type == PORT_DANUBEASC ? "DANUBEASC" : NULL;
+}
+
+static void
+danubeasc_release_port (struct uart_port *port)
+{
+ return;
+}
+
+static int
+danubeasc_request_port (struct uart_port *port)
+{
+ return 0;
+}
+
+static void
+danubeasc_config_port (struct uart_port *port, int flags)
+{
+ if (flags & UART_CONFIG_TYPE) {
+ port->type = PORT_DANUBEASC;
+ danubeasc_request_port(port);
+ }
+}
+
+static int
+danubeasc_verify_port (struct uart_port *port, struct serial_struct *ser)
+{
+ int ret = 0;
+ if (ser->type != PORT_UNKNOWN && ser->type != PORT_DANUBEASC)
+ ret = -EINVAL;
+ if (ser->irq < 0 || ser->irq >= NR_IRQS)
+ ret = -EINVAL;
+ if (ser->baud_base < 9600)
+ ret = -EINVAL;
+ return ret;
+}
+
+static struct uart_ops danubeasc_pops = {
+ .tx_empty = danubeasc_tx_empty,
+ .set_mctrl = danubeasc_set_mctrl,
+ .get_mctrl = danubeasc_get_mctrl,
+ .stop_tx = danubeasc_stop_tx,
+ .start_tx = danubeasc_start_tx,
+ .stop_rx = danubeasc_stop_rx,
+ .enable_ms = danubeasc_enable_ms,
+ .break_ctl = danubeasc_break_ctl,
+ .startup = danubeasc_startup,
+ .shutdown = danubeasc_shutdown,
+ .set_termios = danubeasc_set_termios,
+ .type = danubeasc_type,
+ .release_port = danubeasc_release_port,
+ .request_port = danubeasc_request_port,
+ .config_port = danubeasc_config_port,
+ .verify_port = danubeasc_verify_port,
+};
+
+static struct uart_port danubeasc_port = {
+ membase: (void *)DANUBE_ASC1_BASE_ADDR,
+ mapbase: DANUBE_ASC1_BASE_ADDR,
+ iotype: SERIAL_IO_MEM,
+ irq: DANUBEASC1_RIR,
+ uartclk: 0,
+ fifosize: 16,
+ unused: {DANUBEASC1_TIR, DANUBEASC1_EIR},
+ type: PORT_DANUBEASC,
+ ops: &danubeasc_pops,
+ flags: ASYNC_BOOT_AUTOCONF,
+};
+
+static void
+danubeasc_console_write (struct console *co, const char *s, u_int count)
+{
+ int i, fifocnt;
+ unsigned long flags;
+
+ local_irq_save(flags);
+ for (i = 0; i < count; i++)
+ {
+ /* wait until the FIFO is not full */
+ do
+ {
+ fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == DANUBEASC_TXFIFO_FULL);
+
+ if (s[i] == '\0')
+ {
+ break;
+ }
+
+ if (s[i] == '\n')
+ {
+ writel('\r', DANUBE_ASC1_TBUF);
+ do
+ {
+ fifocnt = (readl(DANUBE_ASC1_FSTAT) & ASCFSTAT_TXFFLMASK)
+ >> ASCFSTAT_TXFFLOFF;
+ } while (fifocnt == DANUBEASC_TXFIFO_FULL);
+ }
+ writel(s[i], DANUBE_ASC1_TBUF);
+ }
+
+ local_irq_restore(flags);
+}
+
+static int __init
+danubeasc_console_setup (struct console *co, char *options)
+{
+ struct uart_port *port;
+ int baud = 115200;
+ int bits = 8;
+ int parity = 'n';
+ int flow = 'n';
+
+ if (uartclk == 0)
+ uartclk = danube_get_fpi_hz();
+ co->index = 0;
+ port = &danubeasc_port;
+ danubeasc_port.uartclk = uartclk;
+ danubeasc_port.type = PORT_DANUBEASC;
+
+ if (options){
+ uart_parse_options(options, &baud, &parity, &bits, &flow);
+ }
+
+ return uart_set_options(port, co, baud, parity, bits, flow);
+}
+
+static struct uart_driver danubeasc_reg;
+static struct console danubeasc_console = {
+ name: "ttyS",
+ write: danubeasc_console_write,
+ device: uart_console_device,
+ setup: danubeasc_console_setup,
+ flags: CON_PRINTBUFFER,
+ index: -1,
+ data: &danubeasc_reg,
+};
+
+static int __init
+danubeasc_console_init (void)
+{
+ register_console(&danubeasc_console);
+ return 0;
+}
+console_initcall(danubeasc_console_init);
+
+static struct uart_driver danubeasc_reg = {
+ .owner = THIS_MODULE,
+ .driver_name = "serial",
+ .dev_name = "ttyS",
+ .major = TTY_MAJOR,
+ .minor = 64,
+ .nr = 1,
+ .cons = &danubeasc_console,
+};
+
+static int __init
+danubeasc_init (void)
+{
+ unsigned char res;
+
+ uart_register_driver(&danubeasc_reg);
+ res = uart_add_one_port(&danubeasc_reg, &danubeasc_port);
+
+ return res;
+}
+
+static void __exit
+danubeasc_exit (void)
+{
+ uart_unregister_driver(&danubeasc_reg);
+}
+
+module_init(danubeasc_init);
+module_exit(danubeasc_exit);
+
+MODULE_AUTHOR("John Crispin <blogic@openwrt.org>");
+MODULE_DESCRIPTION("MIPS Danube serial port driver");
+MODULE_LICENSE("GPL");
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_H__
+#define _DANUBE_H__
+
+
+/*------------ GENERAL */
+
+#define BOARD_SYSTEM_TYPE "DANUBE"
+
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+
+
+/*------------ ASC1 */
+
+#define DANUBE_ASC1_BASE_ADDR (KSEG1 + 0x1E100C00)
+
+/* FIFO status register */
+#define DANUBE_ASC1_FSTAT ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0048))
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFFLOFF 8
+
+/* ASC1 transmit buffer */
+#define DANUBE_ASC1_TBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0020))
+
+/* channel operating modes */
+#define ASCOPT_CSIZE 0x3
+#define ASCOPT_CS7 0x1
+#define ASCOPT_CS8 0x2
+#define ASCOPT_PARENB 0x4
+#define ASCOPT_STOPB 0x8
+#define ASCOPT_PARODD 0x0
+#define ASCOPT_CREAD 0x20
+
+/* hardware modified control register */
+#define DANUBE_ASC1_WHBSTATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0018))
+
+/* receive buffer register */
+#define DANUBE_ASC1_RBUF ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0024))
+
+/* status register */
+#define DANUBE_ASC1_STATE ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0014))
+
+/* interrupt control */
+#define DANUBE_ASC1_IRNCR ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F8))
+
+#define ASC_IRNCR_TIR 0x4
+#define ASC_IRNCR_RIR 0x2
+#define ASC_IRNCR_EIR 0x4
+
+/* clock control */
+#define DANUBE_ASC1_CLC ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0000))
+
+#define DANUBE_ASC1_CLC_DISS 0x2
+
+/* port input select register */
+#define DANUBE_ASC1_PISEL ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0004))
+
+/* tx fifo */
+#define DANUBE_ASC1_TXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0044))
+
+/* rx fifo */
+#define DANUBE_ASC1_RXFCON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0040))
+
+/* control */
+#define DANUBE_ASC1_CON ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0010))
+
+/* timer reload */
+#define DANUBE_ASC1_BG ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x0050))
+
+/* int enable */
+#define DANUBE_ASC1_IRNREN ((u32*)(DANUBE_ASC1_BASE_ADDR + 0x00F4))
+
+#define ASC_IRNREN_RX_BUF 0x8
+#define ASC_IRNREN_TX_BUF 0x4
+#define ASC_IRNREN_ERR 0x2
+#define ASC_IRNREN_TX 0x1
+
+
+/*------------ RCU */
+
+#define DANUBE_RCU_BASE_ADDR 0xBF203000
+
+/* reset request */
+#define DANUBE_RCU_REQ ((u32*)(DANUBE_RCU_BASE_ADDR + 0x0010))
+#define DANUBE_RST_ALL 0x40000000
+
+
+/*------------ MCD */
+
+#define DANUBE_MCD_BASE_ADDR (KSEG1 + 0x1F106000)
+
+/* chip id */
+#define DANUBE_MCD_CHIPID ((u32*)(DANUBE_MCD_BASE_ADDR + 0x0028))
+
+
+/*------------ GPTU */
+
+#define DANUBE_GPTU_BASE_ADDR 0xB8000300
+
+/* clock control register */
+#define DANUBE_GPTU_GPT_CLC ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0000))
+
+/* captur reload register */
+#define DANUBE_GPTU_GPT_CAPREL ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0030))
+
+/* timer 6 control register */
+#define DANUBE_GPTU_GPT_T6CON ((u32*)(DANUBE_GPTU_BASE_ADDR + 0x0020))
+
+
+/*------------ EBU */
+
+#define DANUBE_EBU_BASE_ADDR 0xBE105300
+
+/* bus configuration register */
+#define DANUBE_EBU_BUSCON0 ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0060))
+#define DANUBE_EBU_PCC_CON ((u32*)(DANUBE_EBU_BASE_ADDR + 0x0090))
+#define DANUBE_EBU_PCC_IEN ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A4))
+#define DANUBE_EBU_PCC_ISTAT ((u32*)(DANUBE_EBU_BASE_ADDR + 0x00A0))
+
+
+/*------------ CGU */
+
+#define DANUBE_CGU_BASE_ADDR 0xBF103000
+
+/* clock mux */
+#define DANUBE_CGU_SYS ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0010))
+#define DANUBE_CGU_IFCCR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0018))
+#define DANUBE_CGU_PCICR ((u32*)(DANUBE_CGU_BASE_ADDR + 0x0034))
+
+#define CLOCK_60M 60000000
+#define CLOCK_83M 83333333
+#define CLOCK_111M 111111111
+#define CLOCK_133M 133333333
+#define CLOCK_167M 166666667
+#define CLOCK_333M 333333333
+
+
+/*------------ CGU */
+
+#define DANUBE_PMU_BASE_ADDR (KSEG1 + 0x1F102000)
+
+#define DANUBE_PMU_PWDCR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x001C))
+#define DANUBE_PMU_PWDSR ((u32*)(DANUBE_PMU_BASE_ADDR + 0x0020))
+
+
+/*------------ ICU */
+
+#define DANUBE_ICU_BASE_ADDR 0xBF880200
+
+
+#define DANUBE_ICU_IM0_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0000))
+#define DANUBE_ICU_IM0_IER ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0008))
+#define DANUBE_ICU_IM0_IOSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0010))
+#define DANUBE_ICU_IM0_IRSR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0018))
+#define DANUBE_ICU_IM0_IMR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0020))
+
+#define DANUBE_ICU_IM1_ISR ((u32*)(DANUBE_ICU_BASE_ADDR + 0x0028))
+
+#define DANUBE_ICU_OFFSET (DANUBE_ICU_IM1_ISR - DANUBE_ICU_IM0_ISR)
+
+
+/*------------ ETOP */
+
+#define DANUBE_PPE32_BASE_ADDR 0xBE180000
+
+#define ETHERNET_PACKET_DMA_BUFFER_SIZE 0x600
+
+#define DANUBE_PPE32_MEM_MAP (DANUBE_PPE32_BASE_ADDR + 0x10000 )
+
+#define MII_MODE 1
+
+#define REV_MII_MODE 2
+
+/* mdio access */
+#define DANUBE_PPE32_MDIO_ACC ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1804))
+
+#define MDIO_ACC_REQUEST 0x80000000
+#define MDIO_ACC_READ 0x40000000
+#define MDIO_ACC_ADDR_MASK 0x1f
+#define MDIO_ACC_ADDR_OFFSET 0x15
+#define MDIO_ACC_REG_MASK 0xff
+#define MDIO_ACC_REG_OFFSET 0x10
+#define MDIO_ACC_VAL_MASK 0xffff
+
+/* configuration */
+#define DANUBE_PPE32_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1808))
+
+#define PPE32_MII_MASK 0xfffffffc
+#define PPE32_MII_NORMAL 0x8
+#define PPE32_MII_REVERSE 0xe
+
+/* packet length */
+#define DANUBE_PPE32_IG_PLEN_CTRL ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1820))
+
+#define PPE32_PLEN_OVER 0x5ee
+#define PPE32_PLEN_UNDER 0x400000
+
+/* enet */
+#define DANUBE_PPE32_ENET_MAC_CFG ((u32*)(DANUBE_PPE32_MEM_MAP + 0x1840))
+
+#define PPE32_CGEN 0x800
+
+
+/*------------ DMA */
+#define DANUBE_DMA_BASE_ADDR 0xBE104100
+
+#define DANUBE_DMA_CS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x18))
+#define DANUBE_DMA_CIE ((u32*)(DANUBE_DMA_BASE_ADDR + 0x2C))
+#define DANUBE_DMA_IRNEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0xf4))
+#define DANUBE_DMA_CCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x1C))
+#define DANUBE_DMA_CIS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x28))
+#define DANUBE_DMA_CDLEN ((u32*)(DANUBE_DMA_BASE_ADDR + 0x24))
+#define DANUBE_DMA_PS ((u32*)(DANUBE_DMA_BASE_ADDR + 0x40))
+#define DANUBE_DMA_PCTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x44))
+#define DANUBE_DMA_CTRL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x10))
+#define DANUBE_DMA_CPOLL ((u32*)(DANUBE_DMA_BASE_ADDR + 0x14))
+#define DANUBE_DMA_CDBA ((u32*)(DANUBE_DMA_BASE_ADDR + 0x20))
+
+
+/*------------ PCI */
+#define PCI_CR_PR_BASE_ADDR (KSEG1 + 0x1E105400)
+
+#define PCI_CR_FCI_ADDR_MAP0 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C0))
+#define PCI_CR_FCI_ADDR_MAP1 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C4))
+#define PCI_CR_FCI_ADDR_MAP2 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00C8))
+#define PCI_CR_FCI_ADDR_MAP3 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00CC))
+#define PCI_CR_FCI_ADDR_MAP4 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D0))
+#define PCI_CR_FCI_ADDR_MAP5 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D4))
+#define PCI_CR_FCI_ADDR_MAP6 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00D8))
+#define PCI_CR_FCI_ADDR_MAP7 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00DC))
+#define PCI_CR_CLK_CTRL ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0000))
+#define PCI_CR_PCI_MOD ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0030))
+#define PCI_CR_PC_ARB ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0080))
+#define PCI_CR_FCI_ADDR_MAP11hg ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E4))
+#define PCI_CR_BAR11MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0044))
+#define PCI_CR_BAR12MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0048))
+#define PCI_CR_BAR13MASK ((u32*)(PCI_CR_PR_BASE_ADDR + 0x004C))
+#define PCI_CS_BASE_ADDR1 ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0010))
+#define PCI_CR_PCI_ADDR_MAP11 ((u32*)(PCI_CR_PR_BASE_ADDR + 0x0064))
+#define PCI_CR_FCI_BURST_LENGTH ((u32*)(PCI_CR_PR_BASE_ADDR + 0x00E8))
+#define PCI_CR_PCI_EOI ((u32*)(PCI_CR_PR_BASE_ADDR + 0x002C))
+
+#define PCI_CS_PR_BASE_ADDR (KSEG1 + 0x17000000)
+
+#define PCI_CS_STS_CMD ((u32*)(PCI_CS_PR_BASE_ADDR + 0x0004))
+
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+#define INTERNAL_ARB_ENABLE_BIT 0
+
+
+/*------------ WDT */
+
+#define DANUBE_WDT_BASE_ADDR (KSEG1 + 0x1F880000)
+
+#define DANUBE_BIU_WDT_CR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F0))
+#define DANUBE_BIU_WDT_SR ((u32*)(DANUBE_WDT_BASE_ADDR + 0x03F8))
+
+#define DANUBE_BIU_WDT_CR_GEN (1 << 31)
+#define DANUBE_BIU_WDT_CR_DSEN (1 << 30)
+#define DANUBE_BIU_WDT_CR_LPEN (1 << 29)
+
+#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1))
+#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1))
+#define DANUBE_BIU_WDT_CR_PWL_SET(value) ((((1 << 2) - 1) & (value)) << 26)
+#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16)
+#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+
+/*------------ LED */
+
+#define DANUBE_LED_BASE_ADDR (KSEG1 + 0x1E100BB0)
+#define DANUBE_LED_CON0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0000))
+#define DANUBE_LED_CON1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0004))
+#define DANUBE_LED_CPU0 ((u32*)(DANUBE_LED_BASE_ADDR + 0x0008))
+#define DANUBE_LED_CPU1 ((u32*)(DANUBE_LED_BASE_ADDR + 0x000C))
+#define DANUBE_LED_AR ((u32*)(DANUBE_LED_BASE_ADDR + 0x0010))
+
+#define LED_CON0_SWU (1 << 31)
+#define LED_CON0_AD1 (1 << 25)
+#define LED_CON0_AD0 (1 << 24)
+
+#define DANUBE_LED_2HZ (0)
+#define DANUBE_LED_4HZ (1 << 23)
+#define DANUBE_LED_8HZ (2 << 23)
+#define DANUBE_LED_10HZ (3 << 23)
+#define DANUBE_LED_MASK (0xf << 23)
+
+#define DANUBE_LED_UPD_SRC_FPI (1 << 31)
+#define DANUBE_LED_UPD_MASK (3 << 30)
+#define DANUBE_LED_ADSL_SRC (3 << 24)
+
+#define DANUBE_LED_GROUP0 (1 << 0)
+#define DANUBE_LED_GROUP1 (1 << 1)
+#define DANUBE_LED_GROUP2 (1 << 2)
+
+#define DANUBE_LED_RISING 0
+#define DANUBE_LED_FALLING (1 << 26)
+#define DANUBE_LED_EDGE_MASK (1 << 26)
+
+
+/*------------ GPIO */
+
+#define DANUBE_GPIO_BASE_ADDR (0xBE100B00)
+
+#define DANUBE_GPIO_P0_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0010))
+#define DANUBE_GPIO_P1_OUT ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0040))
+#define DANUBE_GPIO_P0_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0014))
+#define DANUBE_GPIO_P1_IN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0044))
+#define DANUBE_GPIO_P0_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0018))
+#define DANUBE_GPIO_P1_DIR ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0048))
+#define DANUBE_GPIO_P0_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x001C))
+#define DANUBE_GPIO_P1_ALTSEL0 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x004C))
+#define DANUBE_GPIO_P0_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0020))
+#define DANUBE_GPIO_P1_ALTSEL1 ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0050))
+#define DANUBE_GPIO_P0_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0024))
+#define DANUBE_GPIO_P1_OD ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0054))
+#define DANUBE_GPIO_P0_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0028))
+#define DANUBE_GPIO_P1_STOFF ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0058))
+#define DANUBE_GPIO_P0_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x002C))
+#define DANUBE_GPIO_P1_PUDSEL ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x005C))
+#define DANUBE_GPIO_P0_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0030))
+#define DANUBE_GPIO_P1_PUDEN ((u32*)(DANUBE_GPIO_BASE_ADDR + 0x0060))
+
+
+/*------------ SSC */
+
+#define DANUBE_SSC1_BASE_ADDR (KSEG1 + 0x1e100800)
+
+
+
+
+
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_DMA_H__
+#define _DANUBE_DMA_H__
+
+#define RCV_INT 1
+#define TX_BUF_FULL_INT 2
+#define TRANSMIT_CPT_INT 4
+#define DANUBE_DMA_CH_ON 1
+#define DANUBE_DMA_CH_OFF 0
+#define DANUBE_DMA_CH_DEFAULT_WEIGHT 100
+
+enum attr_t{
+ TX = 0,
+ RX = 1,
+ RESERVED = 2,
+ DEFAULT = 3,
+};
+
+#define DMA_OWN 1
+#define CPU_OWN 0
+#define DMA_MAJOR 250
+
+#define DMA_DESC_OWN_CPU 0x0
+#define DMA_DESC_OWN_DMA 0x80000000
+#define DMA_DESC_CPT_SET 0x40000000
+#define DMA_DESC_SOP_SET 0x20000000
+#define DMA_DESC_EOP_SET 0x10000000
+
+#define MISCFG_MASK 0x40
+#define RDERR_MASK 0x20
+#define CHOFF_MASK 0x10
+#define DESCPT_MASK 0x8
+#define DUR_MASK 0x4
+#define EOP_MASK 0x2
+
+#define DMA_DROP_MASK (1<<31)
+
+#define DANUBE_DMA_RX -1
+#define DANUBE_DMA_TX 1
+
+typedef struct dma_chan_map {
+ char dev_name[15];
+ enum attr_t dir;
+ int pri;
+ int irq;
+ int rel_chan_no;
+} _dma_chan_map;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+typedef struct rx_desc{
+ u32 data_length:16;
+ volatile u32 reserved:7;
+ volatile u32 byte_offset:2;
+ volatile u32 Burst_length_offset:3;
+ volatile u32 EoP:1;
+ volatile u32 Res:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer;
+ /*fix me:should be 28 bits here, 32 bits just for host simulatiuon purpose*/
+}_rx_desc;
+
+typedef struct tx_desc{
+ volatile u32 data_length:16;
+ volatile u32 reserved1:7;
+ volatile u32 byte_offset:5;
+ volatile u32 EoP:1;
+ volatile u32 SoP:1;
+ volatile u32 C:1;
+ volatile u32 OWN:1;
+ volatile u32 Data_Pointer;//fix me:should be 28 bits here
+}_tx_desc;
+#else //BIG
+typedef struct rx_desc{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN:1;
+ volatile u32 C:1;
+ volatile u32 SoP:1;
+ volatile u32 EoP:1;
+ volatile u32 Burst_length_offset:3;
+ volatile u32 byte_offset:2;
+ volatile u32 reserve:7;
+ volatile u32 data_length:16;
+ }field;
+ volatile u32 word;
+ }status;
+ volatile u32 Data_Pointer;
+}_rx_desc;
+
+typedef struct tx_desc{
+ union
+ {
+ struct
+ {
+ volatile u32 OWN:1;
+ volatile u32 C:1;
+ volatile u32 SoP:1;
+ volatile u32 EoP:1;
+ volatile u32 byte_offset:5;
+ volatile u32 reserved:7;
+ volatile u32 data_length:16;
+ }field;
+ volatile u32 word;
+ }status;
+ volatile u32 Data_Pointer;
+}_tx_desc;
+#endif //ENDIAN
+
+typedef struct dma_channel_info{
+ /*relative channel number*/
+ int rel_chan_no;
+ /*class for this channel for QoS*/
+ int pri;
+ /*specify byte_offset*/
+ int byte_offset;
+ /*direction*/
+ int dir;
+ /*irq number*/
+ int irq;
+ /*descriptor parameter*/
+ int desc_base;
+ int desc_len;
+ int curr_desc;
+ int prev_desc;/*only used if it is a tx channel*/
+ /*weight setting for WFQ algorithm*/
+ int weight;
+ int default_weight;
+ int packet_size;
+ int burst_len;
+ /*on or off of this channel*/
+ int control;
+ /**optional information for the upper layer devices*/
+#if defined(CONFIG_DANUBE_ETHERNET_D2) || defined(CONFIG_DANUBE_PPA)
+ void* opt[64];
+#else
+ void* opt[25];
+#endif
+ /*Pointer to the peripheral device who is using this channel*/
+ void* dma_dev;
+ /*channel operations*/
+ void (*open)(struct dma_channel_info* pCh);
+ void (*close)(struct dma_channel_info* pCh);
+ void (*reset)(struct dma_channel_info* pCh);
+ void (*enable_irq)(struct dma_channel_info* pCh);
+ void (*disable_irq)(struct dma_channel_info* pCh);
+}_dma_channel_info;
+
+typedef struct dma_device_info{
+ /*device name of this peripheral*/
+ char device_name[15];
+ int reserved;
+ int tx_burst_len;
+ int rx_burst_len;
+ int default_weight;
+ int current_tx_chan;
+ int current_rx_chan;
+ int num_tx_chan;
+ int num_rx_chan;
+ int max_rx_chan_num;
+ int max_tx_chan_num;
+ _dma_channel_info* tx_chan[20];
+ _dma_channel_info* rx_chan[20];
+ /*functions, optional*/
+ u8* (*buffer_alloc)(int len,int* offset, void** opt);
+ void (*buffer_free)(u8* dataptr, void* opt);
+ int (*intr_handler)(struct dma_device_info* info, int status);
+ void * priv; /* used by peripheral driver only */
+}_dma_device_info;
+
+_dma_device_info* dma_device_reserve(char* dev_name);
+
+void dma_device_release(_dma_device_info* dev);
+
+void dma_device_register(_dma_device_info* info);
+
+void dma_device_unregister(_dma_device_info* info);
+
+int dma_device_read(struct dma_device_info* info, u8** dataptr, void** opt);
+
+int dma_device_write(struct dma_device_info* info, u8* dataptr, int len, void* opt);
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_GPIO_H__
+#define _DANUBE_GPIO_H__
+
+extern int danube_port_reserve_pin (unsigned int port, unsigned int pin);
+extern int danube_port_free_pin (unsigned int port, unsigned int pin);
+extern int danube_port_set_open_drain (unsigned int port, unsigned int pin);
+extern int danube_port_clear_open_drain (unsigned int port, unsigned int pin);
+extern int danube_port_set_pudsel (unsigned int port, unsigned int pin);
+extern int danube_port_clear_pudsel (unsigned int port, unsigned int pin);
+extern int danube_port_set_puden (unsigned int port, unsigned int pin);
+extern int danube_port_clear_puden (unsigned int port, unsigned int pin);
+extern int danube_port_set_stoff (unsigned int port, unsigned int pin);
+extern int danube_port_clear_stoff (unsigned int port, unsigned int pin);
+extern int danube_port_set_dir_out (unsigned int port, unsigned int pin);
+extern int danube_port_set_dir_in (unsigned int port, unsigned int pin);
+extern int danube_port_set_output (unsigned int port, unsigned int pin);
+extern int danube_port_clear_output (unsigned int port, unsigned int pin);
+extern int danube_port_get_input (unsigned int port, unsigned int pin);
+extern int danube_port_set_altsel0 (unsigned int port, unsigned int pin);
+extern int danube_port_clear_altsel0 (unsigned int port, unsigned int pin);
+extern int danube_port_set_altsel1 (unsigned int port, unsigned int pin);
+extern int danube_port_clear_altsel1 (unsigned int port, unsigned int pin);
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_IOCTL_H__
+#define _DANUBE_IOCTL_H__
+
+/*------------ LED */
+
+struct danube_port_ioctl_parm
+{
+ int port;
+ int pin;
+ int value;
+};
+
+#define DANUBE_PORT_IOC_MAGIC 0xbf
+#define DANUBE_PORT_IOCOD _IOW(DANUBE_PORT_IOC_MAGIC,0,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCPUDSEL _IOW(DANUBE_PORT_IOC_MAGIC,1,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCPUDEN _IOW(DANUBE_PORT_IOC_MAGIC,2,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCSTOFF _IOW(DANUBE_PORT_IOC_MAGIC,3,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCDIR _IOW(DANUBE_PORT_IOC_MAGIC,4,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCOUTPUT _IOW(DANUBE_PORT_IOC_MAGIC,5,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCINPUT _IOWR(DANUBE_PORT_IOC_MAGIC,6,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCALTSEL0 _IOW(DANUBE_PORT_IOC_MAGIC,7,struct danube_port_ioctl_parm)
+#define DANUBE_PORT_IOCALTSEL1 _IOW(DANUBE_PORT_IOC_MAGIC,8,struct danube_port_ioctl_parm)
+
+#endif
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_IRQ__
+#define _DANUBE_IRQ__
+
+#define INT_NUM_IRQ0 8
+#define INT_NUM_IM0_IRL0 (INT_NUM_IRQ0 + 0)
+#define INT_NUM_IM1_IRL0 (INT_NUM_IRQ0 + 32)
+#define INT_NUM_IM2_IRL0 (INT_NUM_IRQ0 + 64)
+#define INT_NUM_IM3_IRL0 (INT_NUM_IRQ0 + 96)
+#define INT_NUM_IM4_IRL0 (INT_NUM_IRQ0 + 128)
+#define INT_NUM_IM_OFFSET (INT_NUM_IM1_IRL0 - INT_NUM_IM0_IRL0)
+
+#define DANUBEASC1_TIR (INT_NUM_IM3_IRL0 + 7)
+#define DANUBEASC1_RIR (INT_NUM_IM3_IRL0 + 9)
+#define DANUBEASC1_EIR (INT_NUM_IM3_IRL0 + 10)
+
+#define DANUBE_SSC_TIR (INT_NUM_IM0_IRL0 + 15)
+#define DANUBE_SSC_RIR (INT_NUM_IM0_IRL0 + 14)
+#define DANUBE_SSC_EIR (INT_NUM_IM0_IRL0 + 16)
+
+#define DANUBE_TIMER6_INT (INT_NUM_IM1_IRL0 + 23)
+
+#define MIPS_CPU_TIMER_IRQ 7
+
+#define DANUBE_DMA_CH0_INT (INT_NUM_IM2_IRL0)
+#define DANUBE_DMA_CH1_INT (INT_NUM_IM2_IRL0 + 1)
+#define DANUBE_DMA_CH2_INT (INT_NUM_IM2_IRL0 + 2)
+#define DANUBE_DMA_CH3_INT (INT_NUM_IM2_IRL0 + 3)
+#define DANUBE_DMA_CH4_INT (INT_NUM_IM2_IRL0 + 4)
+#define DANUBE_DMA_CH5_INT (INT_NUM_IM2_IRL0 + 5)
+#define DANUBE_DMA_CH6_INT (INT_NUM_IM2_IRL0 + 6)
+#define DANUBE_DMA_CH7_INT (INT_NUM_IM2_IRL0 + 7)
+#define DANUBE_DMA_CH8_INT (INT_NUM_IM2_IRL0 + 8)
+#define DANUBE_DMA_CH9_INT (INT_NUM_IM2_IRL0 + 9)
+#define DANUBE_DMA_CH10_INT (INT_NUM_IM2_IRL0 + 10)
+#define DANUBE_DMA_CH11_INT (INT_NUM_IM2_IRL0 + 11)
+#define DANUBE_DMA_CH12_INT (INT_NUM_IM2_IRL0 + 25)
+#define DANUBE_DMA_CH13_INT (INT_NUM_IM2_IRL0 + 26)
+#define DANUBE_DMA_CH14_INT (INT_NUM_IM2_IRL0 + 27)
+#define DANUBE_DMA_CH15_INT (INT_NUM_IM2_IRL0 + 28)
+#define DANUBE_DMA_CH16_INT (INT_NUM_IM2_IRL0 + 29)
+#define DANUBE_DMA_CH17_INT (INT_NUM_IM2_IRL0 + 30)
+#define DANUBE_DMA_CH18_INT (INT_NUM_IM2_IRL0 + 16)
+#define DANUBE_DMA_CH19_INT (INT_NUM_IM2_IRL0 + 21)
+
+extern void mask_and_ack_danube_irq (unsigned int irq_nr);
+
+#endif
--- /dev/null
+#ifndef DANUBE_SW_H
+#define DANUBE_SW_H
+
+
+
+/******************************************************************************
+**
+** FILE NAME : danube_sw.h
+** PROJECT : Danube
+** MODULES : ETH Interface (MII0)
+**
+** DATE : 11 AUG 2005
+** AUTHOR : Wu Qi Ming
+** DESCRIPTION : ETH Interface (MII0) Driver Header File
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Date $Author $Comment
+** 11 AUG 2005 Wu Qi Ming Initiate Version
+** 23 OCT 2006 Xu Liang Add GPL header.
+*******************************************************************************/
+
+
+#define SET_ETH_SPEED_AUTO SIOCDEVPRIVATE
+#define SET_ETH_SPEED_10 SIOCDEVPRIVATE+1
+#define SET_ETH_SPEED_100 SIOCDEVPRIVATE+2
+#define SET_ETH_DUPLEX_AUTO SIOCDEVPRIVATE+3
+#define SET_ETH_DUPLEX_HALF SIOCDEVPRIVATE+4
+#define SET_ETH_DUPLEX_FULL SIOCDEVPRIVATE+5
+#define SET_ETH_REG SIOCDEVPRIVATE+6
+#define VLAN_TOOLS SIOCDEVPRIVATE+7
+#define MAC_TABLE_TOOLS SIOCDEVPRIVATE+8
+#define SET_VLAN_COS SIOCDEVPRIVATE+9
+#define SET_DSCP_COS SIOCDEVPRIVATE+10
+#define ENABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+11
+#define DISABLE_VLAN_CLASSIFICATION SIOCDEVPRIVATE+12
+#define VLAN_CLASS_FIRST SIOCDEVPRIVATE+13
+#define VLAN_CLASS_SECOND SIOCDEVPRIVATE+14
+#define ENABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+15
+#define DISABLE_DSCP_CLASSIFICATION SIOCDEVPRIVATE+16
+#define PASS_UNICAST_PACKETS SIOCDEVPRIVATE+17
+#define FILTER_UNICAST_PACKETS SIOCDEVPRIVATE+18
+#define KEEP_BROADCAST_PACKETS SIOCDEVPRIVATE+19
+#define DROP_BROADCAST_PACKETS SIOCDEVPRIVATE+20
+#define KEEP_MULTICAST_PACKETS SIOCDEVPRIVATE+21
+#define DROP_MULTICAST_PACKETS SIOCDEVPRIVATE+22
+
+
+/*===mac table commands==*/
+#define RESET_MAC_TABLE 0
+#define READ_MAC_ENTRY 1
+#define WRITE_MAC_ENTRY 2
+#define ADD_MAC_ENTRY 3
+
+/*====vlan commands===*/
+
+#define CHANGE_VLAN_CTRL 0
+#define READ_VLAN_ENTRY 1
+#define UPDATE_VLAN_ENTRY 2
+#define CLEAR_VLAN_ENTRY 3
+#define RESET_VLAN_TABLE 4
+#define ADD_VLAN_ENTRY 5
+
+/*
+** MDIO constants.
+*/
+
+#define MDIO_BASE_STATUS_REG 0x1
+#define MDIO_BASE_CONTROL_REG 0x0
+#define MDIO_PHY_ID_HIGH_REG 0x2
+#define MDIO_PHY_ID_LOW_REG 0x3
+#define MDIO_BC_NEGOTIATE 0x0200
+#define MDIO_BC_FULL_DUPLEX_MASK 0x0100
+#define MDIO_BC_AUTO_NEG_MASK 0x1000
+#define MDIO_BC_SPEED_SELECT_MASK 0x2000
+#define MDIO_STATUS_100_FD 0x4000
+#define MDIO_STATUS_100_HD 0x2000
+#define MDIO_STATUS_10_FD 0x1000
+#define MDIO_STATUS_10_HD 0x0800
+#define MDIO_STATUS_SPEED_DUPLEX_MASK 0x7800
+#define MDIO_ADVERTISMENT_REG 0x4
+#define MDIO_ADVERT_100_FD 0x100
+#define MDIO_ADVERT_100_HD 0x080
+#define MDIO_ADVERT_10_FD 0x040
+#define MDIO_ADVERT_10_HD 0x020
+#define MDIO_LINK_UP_MASK 0x4
+#define MDIO_START 0x1
+#define MDIO_READ 0x2
+#define MDIO_WRITE 0x1
+#define MDIO_PREAMBLE 0xfffffffful
+
+#define PHY_RESET 0x8000
+#define AUTO_NEGOTIATION_ENABLE 0X1000
+#define AUTO_NEGOTIATION_COMPLETE 0x20
+#define RESTART_AUTO_NEGOTIATION 0X200
+
+
+/*ETOP_MDIO_CFG MASKS*/
+#define SMRST_MASK 0X2000
+#define PHYA1_MASK 0X1F00
+#define PHYA0_MASK 0XF8
+#define UMM1_MASK 0X4
+#define UMM0_MASK 0X2
+
+/*ETOP_MDIO_ACCESS MASKS*/
+#define MDIO_RA_MASK 0X80000000
+#define MDIO_RW_MASK 0X40000000
+
+
+/*ENET_MAC_CFG MASKS*/
+#define BP_MASK 1<<12
+#define CGEN_MASK 1<<11
+#define IFG_MASK 0x3F<<5
+#define IPAUS_MASK 1<<4
+#define EPAUS_MASK 1<<3
+#define DUPLEX_MASK 1<<2
+#define SPEED_MASK 0x2
+#define LINK_MASK 1
+
+/*ENETS_CoS_CFG MASKS*/
+#define VLAN_MASK 2
+#define DSCP_MASK 1
+
+/*ENET_CFG MASKS*/
+#define VL2_MASK 1<<29
+#define FTUC_MASK 1<<25
+#define DPBC_MASK 1<<24
+#define DPMC_MASK 1<<23
+
+#define PHY0_ADDR 0
+#define PHY1_ADDR 1
+#define P1M 0
+
+#define DANUBE_SW_REG32(reg_num) *((volatile u32*)(reg_num))
+
+#define OK 0;
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+typedef struct mac_table_entry{
+ u64 mac_address:48;
+ u64 p0:1;
+ u64 p1:1;
+ u64 p2:1;
+ u64 cr:1;
+ u64 ma_st:3;
+ u64 res:9;
+}_mac_table_entry;
+
+typedef struct IFX_Switch_VLanTableEntry{
+ u32 vlan_id:12;
+ u32 mp0:1;
+ u32 mp1:1;
+ u32 mp2:1;
+ u32 v:1;
+ u32 res:16;
+}_IFX_Switch_VLanTableEntry;
+
+typedef struct mac_table_req{
+ int cmd;
+ int index;
+ u32 data;
+ u64 entry_value;
+}_mac_table_req;
+
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+typedef struct mac_table_entry{
+ u64 mac_address:48;
+ u64 p0:1;
+ u64 p1:1;
+ u64 p2:1;
+ u64 cr:1;
+ u64 ma_st:3;
+ u64 res:9;
+}_mac_table_entry;
+
+typedef struct IFX_Switch_VLanTableEntry{
+ u32 vlan_id:12;
+ u32 mp0:1;
+ u32 mp1:1;
+ u32 mp2:1;
+ u32 v:1;
+ u32 res:16;
+}_IFX_Switch_VLanTableEntry;
+
+
+typedef struct mac_table_req{
+ int cmd;
+ int index;
+ u32 data;
+ u64 entry_value;
+}_mac_table_req;
+
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+typedef struct vlan_cos_req{
+ int pri;
+ int cos_value;
+}_vlan_cos_req;
+
+typedef struct dscp_cos_req{
+ int dscp;
+ int cos_value;
+}_dscp_cos_req;
+
+
+typedef struct vlan_req{
+ int cmd;
+ int index;
+ u32 data;
+ u32 entry_value;
+}_vlan_req;
+
+typedef struct data_req{
+ int index;
+ u32 value;
+}_data_req;
+
+enum duplex
+{
+ half,
+ full,
+ autoneg
+};
+
+struct switch_priv {
+ struct net_device_stats stats;
+ int rx_packetlen;
+ u8 *rx_packetdata;
+ int rx_status;
+ int tx_packetlen;
+#ifdef CONFIG_NET_HW_FLOWCONTROL
+ int fc_bit;
+#endif //CONFIG_NET_HW_FLOWCONTROL
+ u8 *tx_packetdata;
+ int tx_status;
+ struct dma_device_info *dma_device;
+ struct sk_buff *skb;
+ spinlock_t lock;
+ int mdio_phy_addr;
+ int current_speed;
+ int current_speed_selection;
+ int rx_queue_len;
+ int full_duplex;
+ enum duplex current_duplex;
+};
+
+#endif //DANUBE_SW_H
--- /dev/null
+#ifndef DANUBE_H
+#define DANUBE_H
+/******************************************************************************
+ Copyright (c) 2002, Infineon Technologies. All rights reserved.
+
+ No Warranty
+ Because the program is licensed free of charge, there is no warranty for
+ the program, to the extent permitted by applicable law. Except when
+ otherwise stated in writing the copyright holders and/or other parties
+ provide the program "as is" without warranty of any kind, either
+ expressed or implied, including, but not limited to, the implied
+ warranties of merchantability and fitness for a particular purpose. The
+ entire risk as to the quality and performance of the program is with
+ you. should the program prove defective, you assume the cost of all
+ necessary servicing, repair or correction.
+
+ In no event unless required by applicable law or agreed to in writing
+ will any copyright holder, or any other party who may modify and/or
+ redistribute the program as permitted above, be liable to you for
+ damages, including any general, special, incidental or consequential
+ damages arising out of the use or inability to use the program
+ (including but not limited to loss of data or data being rendered
+ inaccurate or losses sustained by you or third parties or a failure of
+ the program to operate with any other programs), even if such holder or
+ other party has been advised of the possibility of such damages.
+******************************************************************************/
+
+/***********************************************************************/
+/* Module : WDT register address and bits */
+/***********************************************************************/
+
+#define BOARD_SYSTEM_TYPE "DANUBE"
+
+#define DANUBE_BIU_WDT (KSEG1+0x1F880000)
+
+/***Watchdog Timer Control Register ***/
+#define DANUBE_BIU_WDT_CR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F0))
+#define DANUBE_BIU_WDT_CR_GEN (1 << 31)
+#define DANUBE_BIU_WDT_CR_DSEN (1 << 30)
+#define DANUBE_BIU_WDT_CR_LPEN (1 << 29)
+#define DANUBE_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1))
+#define DANUBE_BIU_WDT_CR_PWL_SET(value) (((( 1 << 2) - 1) & (value)) << 26)
+#define DANUBE_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1))
+#define DANUBE_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_BIU_WDT_CR_PW_GET(value) (((value) >> 16) & ((1 << 8) - 1))
+#define DANUBE_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16)
+#define DANUBE_BIU_WDT_CR_RELOAD_GET(value) (((value) >> 0) & ((1 << 16) - 1))
+#define DANUBE_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***Watchdog Timer Status Register***/
+#define DANUBE_BIU_WDT_SR ((volatile u32*)(DANUBE_BIU_WDT + 0x03F8))
+#define DANUBE_BIU_WDT_SR_EN (1 << 31)
+#define DANUBE_BIU_WDT_SR_AE (1 << 30)
+#define DANUBE_BIU_WDT_SR_PRW (1 << 29)
+#define DANUBE_BIU_WDT_SR_EXP (1 << 28)
+#define DANUBE_BIU_WDT_SR_PWD (1 << 27)
+#define DANUBE_BIU_WDT_SR_DS (1 << 26)
+#define DANUBE_BIU_WDT_SR_VALUE_GET(value) (((value) >> 0) & ((1 << 16) - 1))
+#define DANUBE_BIU_WDT_SR_VALUE_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : PMU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_PMU (KSEG1+0x1F102000)
+
+/* PMU Power down Control Register */
+#define DANUBE_PMU_PWDCR ((volatile u32*)(DANUBE_PMU+0x001C))
+#define DANUBE_PMU_PWDCR_GPT (1 << 12)
+#define DANUBE_PMU_PWDCR_FPI (1 << 14)
+
+
+/* PMU Status Register */
+#define DANUBE_PMU_SR ((volatile u32*)(DANUBE_PMU+0x0020))
+
+#define DANUBE_PMU_DMA_SHIFT 5
+#define DANUBE_PMU_PPE_SHIFT 13
+#define DANUBE_PMU_SDIO_SHIFT 16
+#define DANUBE_PMU_ETOP_SHIFT 22
+#define DANUBE_PMU_ENET0_SHIFT 24
+#define DANUBE_PMU_ENET1_SHIFT 25
+
+/***********************************************************************/
+/* Module : RCU register address and bits */
+/***********************************************************************/
+#define DANUBE_RCU_BASE_ADDR (0xBF203000)
+
+#define DANUBE_RCU_REQ (0x0010 + DANUBE_RCU_BASE_ADDR) /* will remove this, pls use DANUBE_RCU_RST_REQ */
+
+#define DANUBE_RCU_RST_REQ ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0010))
+#define DANUBE_RCU_RST_STAT ((volatile u32*)(DANUBE_RCU_BASE_ADDR + 0x0014))
+#define DANUBE_RST_ALL (0x40000000)
+
+/***Reset Request Register***/
+#define DANUBE_RCU_RST_REQ_CPU0 (1 << 31)
+#define DANUBE_RCU_RST_REQ_CPU1 (1 << 3)
+#define DANUBE_RCU_RST_REQ_CPUSUB (1 << 29)
+#define DANUBE_RCU_RST_REQ_HRST (1 << 28)
+#define DANUBE_RCU_RST_REQ_WDT0 (1 << 27)
+#define DANUBE_RCU_RST_REQ_WDT1 (1 << 26)
+#define DANUBE_RCU_RST_REQ_CFG_GET(value) (((value) >> 23) & ((1 << 3) - 1))
+#define DANUBE_RCU_RST_REQ_CFG_SET(value) (((( 1 << 3) - 1) & (value)) << 23)
+#define DANUBE_RCU_RST_REQ_SWTBOOT (1 << 22)
+#define DANUBE_RCU_RST_REQ_DMA (1 << 21)
+#define DANUBE_RCU_RST_REQ_ARC_JTAG (1 << 20)
+#define DANUBE_RCU_RST_REQ_ETHPHY0 (1 << 19)
+#define DANUBE_RCU_RST_REQ_CPU0_BR (1 << 18)
+
+#define DANBUE_RCU_RST_REQ_AFE (1 << 11)
+#define DANBUE_RCU_RST_REQ_DFE (1 << 7)
+
+/* CPU0, CPU1, CPUSUB, HRST, WDT0, WDT1, DMA, ETHPHY1, ETHPHY0 */
+#define DANUBE_RCU_RST_REQ_ALL DANUBE_RST_ALL
+
+#define DANUBE_RCU_STAT (0x0014 + DANUBE_RCU_BASE_ADDR)
+#define DANUBE_RCU_RST_SR ( (volatile u32 *)(DANUBE_RCU_STAT)) /* will remove this, pls use DANUBE_RCU_RST_STAT */
+
+/*#define DANUBE_RCU_MON (0x0030 + DANUBE_RCU_BASE_ADDR) */
+
+/***********************************************************************/
+/* Module : BCU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_BCU_BASE_ADDR (KSEG1+0x1E100000)
+
+/***BCU Control Register (0010H)***/
+#define DANUBE_BCU_CON ((volatile u32*)(0x0010 + DANUBE_BCU_BASE_ADDR))
+#define DANUBE_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24)
+#define DANUBE_BCU_BCU_CON_SPE (1 << 19)
+#define DANUBE_BCU_BCU_CON_PSE (1 << 18)
+#define DANUBE_BCU_BCU_CON_DBG (1 << 16)
+#define DANUBE_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***BCU Error Control Capture Register (0020H)***/
+#define DANUBE_BCU_ECON ((volatile u32*)(0x0020 + DANUBE_BCU_BASE_ADDR))
+#define DANUBE_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24)
+#define DANUBE_BCU_BCU_ECON_RDN (1 << 23)
+#define DANUBE_BCU_BCU_ECON_WRN (1 << 22)
+#define DANUBE_BCU_BCU_ECON_SVM (1 << 21)
+#define DANUBE_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19)
+#define DANUBE_BCU_BCU_ECON_ABT (1 << 18)
+#define DANUBE_BCU_BCU_ECON_RDY (1 << 17)
+#define DANUBE_BCU_BCU_ECON_TOUT (1 << 16)
+#define DANUBE_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0)
+#define DANUBE_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28)
+
+/***BCU Error Address Capture Register (0024 H)***/
+#define DANUBE_BCU_EADD ((volatile u32*)(0x0024 + DANUBE_BCU_BASE_ADDR))
+
+/***BCU Error Data Capture Register (0028H)***/
+#define DANUBE_BCU_EDAT ((volatile u32*)(0x0028 + DANUBE_BCU_BASE_ADDR))
+#define DANUBE_BCU_IRNEN ((volatile u32*)(0x00F4 + DANUBE_BCU_BASE_ADDR))
+#define DANUBE_BCU_IRNICR ((volatile u32*)(0x00F8 + DANUBE_BCU_BASE_ADDR))
+#define DANUBE_BCU_IRNCR ((volatile u32*)(0x00FC + DANUBE_BCU_BASE_ADDR))
+
+/***********************************************************************/
+/* Module : MBC register address and bits */
+/***********************************************************************/
+
+#define DANUBE_MBC (0xBF103000)
+/***********************************************************************/
+
+/***Mailbox CPU Configuration Register***/
+#define DANUBE_MBC_MBC_CFG ((volatile u32*)(DANUBE_MBC+ 0x0080))
+#define DANUBE_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_MBC_MBC_CFG_RES (1 << 5)
+#define DANUBE_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1)
+#define DANUBE_MBC_MBC_CFG_SIZE (1 << 0)
+
+/***Mailbox CPU Interrupt Status Register***/
+#define DANUBE_MBC_MBC_ISR ((volatile u32*)(DANUBE_MBC+ 0x0084))
+#define DANUBE_MBC_MBC_ISR_B3DA (1 << 31)
+#define DANUBE_MBC_MBC_ISR_B2DA (1 << 30)
+#define DANUBE_MBC_MBC_ISR_B1E (1 << 29)
+#define DANUBE_MBC_MBC_ISR_B0E (1 << 28)
+#define DANUBE_MBC_MBC_ISR_WDT (1 << 27)
+#define DANUBE_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask Register***/
+#define DANUBE_MBC_MBC_MSK ((volatile u32*)(DANUBE_MBC+ 0x0088))
+#define DANUBE_MBC_MBC_MSK_B3DA (1 << 31)
+#define DANUBE_MBC_MBC_MSK_B2DA (1 << 30)
+#define DANUBE_MBC_MBC_MSK_B1E (1 << 29)
+#define DANUBE_MBC_MBC_MSK_B0E (1 << 28)
+#define DANUBE_MBC_MBC_MSK_WDT (1 << 27)
+#define DANUBE_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 01 Register***/
+#define DANUBE_MBC_MBC_MSK01 ((volatile u32*)(DANUBE_MBC+ 0x008C))
+#define DANUBE_MBC_MBC_MSK01_B3DA (1 << 31)
+#define DANUBE_MBC_MBC_MSK01_B2DA (1 << 30)
+#define DANUBE_MBC_MBC_MSK01_B1E (1 << 29)
+#define DANUBE_MBC_MBC_MSK01_B0E (1 << 28)
+#define DANUBE_MBC_MBC_MSK01_WDT (1 << 27)
+#define DANUBE_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Mask 10 Register***/
+#define DANUBE_MBC_MBC_MSK10 ((volatile u32*)(DANUBE_MBC+ 0x0090))
+#define DANUBE_MBC_MBC_MSK10_B3DA (1 << 31)
+#define DANUBE_MBC_MBC_MSK10_B2DA (1 << 30)
+#define DANUBE_MBC_MBC_MSK10_B1E (1 << 29)
+#define DANUBE_MBC_MBC_MSK10_B0E (1 << 28)
+#define DANUBE_MBC_MBC_MSK10_WDT (1 << 27)
+#define DANUBE_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
+
+/***Mailbox CPU Short Command Register***/
+#define DANUBE_MBC_MBC_CMD ((volatile u32*)(DANUBE_MBC+ 0x0094))
+#define DANUBE_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0)
+
+/***Mailbox CPU Input Data of Buffer 0***/
+#define DANUBE_MBC_MBC_ID0 ((volatile u32*)(DANUBE_MBC+ 0x0000))
+#define DANUBE_MBC_MBC_ID0_INDATA
+
+/***Mailbox CPU Input Data of Buffer 1***/
+#define DANUBE_MBC_MBC_ID1 ((volatile u32*)(DANUBE_MBC+ 0x0020))
+#define DANUBE_MBC_MBC_ID1_INDATA
+
+/***Mailbox CPU Output Data of Buffer 2***/
+#define DANUBE_MBC_MBC_OD2 ((volatile u32*)(DANUBE_MBC+ 0x0040))
+#define DANUBE_MBC_MBC_OD2_OUTDATA
+
+/***Mailbox CPU Output Data of Buffer 3***/
+#define DANUBE_MBC_MBC_OD3 ((volatile u32*)(DANUBE_MBC+ 0x0060))
+#define DANUBE_MBC_MBC_OD3_OUTDATA
+
+/***Mailbox CPU Control Register of Buffer 0***/
+#define DANUBE_MBC_MBC_CR0 ((volatile u32*)(DANUBE_MBC+ 0x0004))
+#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 1***/
+#define DANUBE_MBC_MBC_CR1 ((volatile u32*)(DANUBE_MBC+ 0x0024))
+#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 2***/
+#define DANUBE_MBC_MBC_CR2 ((volatile u32*)(DANUBE_MBC+ 0x0044))
+#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Control Register of Buffer 3***/
+#define DANUBE_MBC_MBC_CR3 ((volatile u32*)(DANUBE_MBC+ 0x0064))
+#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***Mailbox CPU Free Space of Buffer 0***/
+#define DANUBE_MBC_MBC_FS0 ((volatile u32*)(DANUBE_MBC+ 0x0008))
+#define DANUBE_MBC_MBC_FS0_FS
+
+/***Mailbox CPU Free Space of Buffer 1***/
+#define DANUBE_MBC_MBC_FS1 ((volatile u32*)(DANUBE_MBC+ 0x0028))
+#define DANUBE_MBC_MBC_FS1_FS
+
+/***Mailbox CPU Free Space of Buffer 2***/
+#define DANUBE_MBC_MBC_FS2 ((volatile u32*)(DANUBE_MBC+ 0x0048))
+#define DANUBE_MBC_MBC_FS2_FS
+
+/***Mailbox CPU Free Space of Buffer 3***/
+#define DANUBE_MBC_MBC_FS3 ((volatile u32*)(DANUBE_MBC+ 0x0068))
+#define DANUBE_MBC_MBC_FS3_FS
+
+/***Mailbox CPU Data Available in Buffer 0***/
+#define DANUBE_MBC_MBC_DA0 ((volatile u32*)(DANUBE_MBC+ 0x000C))
+#define DANUBE_MBC_MBC_DA0_DA
+
+/***Mailbox CPU Data Available in Buffer 1***/
+#define DANUBE_MBC_MBC_DA1 ((volatile u32*)(DANUBE_MBC+ 0x002C))
+#define DANUBE_MBC_MBC_DA1_DA
+
+/***Mailbox CPU Data Available in Buffer 2***/
+#define DANUBE_MBC_MBC_DA2 ((volatile u32*)(DANUBE_MBC+ 0x004C))
+#define DANUBE_MBC_MBC_DA2_DA
+
+/***Mailbox CPU Data Available in Buffer 3***/
+#define DANUBE_MBC_MBC_DA3 ((volatile u32*)(DANUBE_MBC+ 0x006C))
+#define DANUBE_MBC_MBC_DA3_DA
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_IABS0 ((volatile u32*)(DANUBE_MBC+ 0x0010))
+#define DANUBE_MBC_MBC_IABS0_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_IABS1 ((volatile u32*)(DANUBE_MBC+ 0x0030))
+#define DANUBE_MBC_MBC_IABS1_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_IABS2 ((volatile u32*)(DANUBE_MBC+ 0x0050))
+#define DANUBE_MBC_MBC_IABS2_IABS
+
+/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_IABS3 ((volatile u32*)(DANUBE_MBC+ 0x0070))
+#define DANUBE_MBC_MBC_IABS3_IABS
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_ITMP0 ((volatile u32*)(DANUBE_MBC+ 0x0014))
+#define DANUBE_MBC_MBC_ITMP0_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_ITMP1 ((volatile u32*)(DANUBE_MBC+ 0x0034))
+#define DANUBE_MBC_MBC_ITMP1_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_ITMP2 ((volatile u32*)(DANUBE_MBC+ 0x0054))
+#define DANUBE_MBC_MBC_ITMP2_ITMP
+
+/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_ITMP3 ((volatile u32*)(DANUBE_MBC+ 0x0074))
+#define DANUBE_MBC_MBC_ITMP3_ITMP
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_OABS0 ((volatile u32*)(DANUBE_MBC+ 0x0018))
+#define DANUBE_MBC_MBC_OABS0_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_OABS1 ((volatile u32*)(DANUBE_MBC+ 0x0038))
+#define DANUBE_MBC_MBC_OABS1_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_OABS2 ((volatile u32*)(DANUBE_MBC+ 0x0058))
+#define DANUBE_MBC_MBC_OABS2_OABS
+
+/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_OABS3 ((volatile u32*)(DANUBE_MBC+ 0x0078))
+#define DANUBE_MBC_MBC_OABS3_OABS
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
+#define DANUBE_MBC_MBC_OTMP0 ((volatile u32*)(DANUBE_MBC+ 0x001C))
+#define DANUBE_MBC_MBC_OTMP0_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
+#define DANUBE_MBC_MBC_OTMP1 ((volatile u32*)(DANUBE_MBC+ 0x003C))
+#define DANUBE_MBC_MBC_OTMP1_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
+#define DANUBE_MBC_MBC_OTMP2 ((volatile u32*)(DANUBE_MBC+ 0x005C))
+#define DANUBE_MBC_MBC_OTMP2_OTMP
+
+/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
+#define DANUBE_MBC_MBC_OTMP3 ((volatile u32*)(DANUBE_MBC+ 0x007C))
+#define DANUBE_MBC_MBC_OTMP3_OTMP
+
+/***DSP Control Register***/
+#define DANUBE_MBC_DCTRL ((volatile u32*)(DANUBE_MBC+ 0x00A0))
+#define DANUBE_MBC_DCTRL_BA (1 << 0)
+#define DANUBE_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1)
+#define DANUBE_MBC_DCTRL_IDL (1 << 4)
+#define DANUBE_MBC_DCTRL_RES (1 << 15)
+
+/***DSP Status Register***/
+#define DANUBE_MBC_DSTA ((volatile u32*)(DANUBE_MBC+ 0x00A4))
+#define DANUBE_MBC_DSTA_IDLE (1 << 0)
+#define DANUBE_MBC_DSTA_PD (1 << 1)
+
+/***DSP Test 1 Register***/
+#define DANUBE_MBC_DTST1 ((volatile u32*)(DANUBE_MBC+ 0x00A8))
+#define DANUBE_MBC_DTST1_ABORT (1 << 0)
+#define DANUBE_MBC_DTST1_HWF32 (1 << 1)
+#define DANUBE_MBC_DTST1_HWF4M (1 << 2)
+#define DANUBE_MBC_DTST1_HWFOP (1 << 3)
+
+/***********************************************************************/
+/* Module : MEI register address and bits */
+/***********************************************************************/
+#define MEI_SPACE_ACCESS 0xBE116000
+
+/*** Register address offsets, relative to MEI_SPACE_ADDRESS ***/
+#define MEI_DATA_XFR ((volatile u32*)(0x0000 + MEI_SPACE_ACCESS))
+#define MEI_VERSION ((volatile u32*)(0x0004 + MEI_SPACE_ACCESS))
+#define MEI_ARC_GP_STAT ((volatile u32*)(0x0008 + MEI_SPACE_ACCESS))
+#define MEI_DATA_XFR_STAT ((volatile u32*)(0x000C + MEI_SPACE_ACCESS))
+#define MEI_XFR_ADDR ((volatile u32*)(0x0010 + MEI_SPACE_ACCESS))
+#define MEI_MAX_WAIT ((volatile u32*)(0x0014 + MEI_SPACE_ACCESS))
+#define MEI_TO_ARC_INT ((volatile u32*)(0x0018 + MEI_SPACE_ACCESS))
+#define ARC_TO_MEI_INT ((volatile u32*)(0x001C + MEI_SPACE_ACCESS))
+#define ARC_TO_MEI_INT_MASK ((volatile u32*)(0x0020 + MEI_SPACE_ACCESS))
+#define MEI_DEBUG_WAD ((volatile u32*)(0x0024 + MEI_SPACE_ACCESS))
+#define MEI_DEBUG_RAD ((volatile u32*)(0x0028 + MEI_SPACE_ACCESS))
+#define MEI_DEBUG_DATA ((volatile u32*)(0x002C + MEI_SPACE_ACCESS))
+#define MEI_DEBUG_DEC ((volatile u32*)(0x0030 + MEI_SPACE_ACCESS))
+#define MEI_CONFIG ((volatile u32*)(0x0034 + MEI_SPACE_ACCESS))
+#define MEI_RST_CONTROL ((volatile u32*)(0x0038 + MEI_SPACE_ACCESS))
+#define MEI_DBG_MASTER ((volatile u32*)(0x003C + MEI_SPACE_ACCESS))
+#define MEI_CLK_CONTROL ((volatile u32*)(0x0040 + MEI_SPACE_ACCESS))
+#define MEI_BIST_CONTROL ((volatile u32*)(0x0044 + MEI_SPACE_ACCESS))
+#define MEI_BIST_STAT ((volatile u32*)(0x0048 + MEI_SPACE_ACCESS))
+#define MEI_XDATA_BASE_SH ((volatile u32*)(0x004c + MEI_SPACE_ACCESS))
+#define MEI_XDATA_BASE ((volatile u32*)(0x0050 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR_BASE ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR0 ((volatile u32*)(0x0054 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR1 ((volatile u32*)(0x0058 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR2 ((volatile u32*)(0x005C + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR3 ((volatile u32*)(0x0060 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR4 ((volatile u32*)(0x0064 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR5 ((volatile u32*)(0x0068 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR6 ((volatile u32*)(0x006C + MEI_SPACE_ACCESS)))
+#define MEI_XMEM_BAR7 ((volatile u32*)(0x0070 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR8 ((volatile u32*)(0x0074 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR9 ((volatile u32*)(0x0078 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR10 ((volatile u32*)(0x007C + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR11 ((volatile u32*)(0x0080 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR12 ((volatile u32*)(0x0084 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR13 ((volatile u32*)(0x0088 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR14 ((volatile u32*)(0x008C + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR15 ((volatile u32*)(0x0090 + MEI_SPACE_ACCESS))
+#define MEI_XMEM_BAR16 ((volatile u32*)(0x0094 + MEI_SPACE_ACCESS))
+
+/***********************************************************************/
+/* Module : SSC1 register address and bits */
+/***********************************************************************/
+
+#define DANUBE_SSC1 (KSEG1+0x1e100800)
+/***********************************************************************/
+/***SSC Clock Control Register***/
+#define DANUBE_SSC_CLC (0x0000)
+#define DANUBE_SSC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_SSC_CLC_DISS (1 << 1)
+#define DANUBE_SSC_CLC_DISR (1 << 0)
+/***SSC Port Input Selection Register***/
+#define DANUBE_SSC_PISEL (0x0004)
+/***SSC Identification Register***/
+#define DANUBE_SSC_ID (0x0008)
+/***Control Register (Programming Mode)***/
+#define DANUBE_SSC_CON (0x0010)
+#define DANUBE_SSC_CON_RUEN (1 << 12)
+#define DANUBE_SSC_CON_TUEN (1 << 11)
+#define DANUBE_SSC_CON_AEN (1 << 10)
+#define DANUBE_SSC_CON_REN (1 << 9)
+#define DANUBE_SSC_CON_TEN (1 << 8)
+#define DANUBE_SSC_CON_LB (1 << 7)
+#define DANUBE_SSC_CON_PO (1 << 6)
+#define DANUBE_SSC_CON_PH (1 << 5)
+#define DANUBE_SSC_CON_HB (1 << 4)
+#define DANUBE_SSC_CON_BM(value) (((( 1 << 5) - 1) & (value)) << 16)
+#define DANUBE_SSC_CON_RX_OFF (1 << 1)
+#define DANUBE_SSC_CON_TX_OFF (1 << 0)
+/***SCC Status Register***/
+#define DANUBE_SSC_STATE (0x0014)
+#define DANUBE_SSC_STATE_EN (1 << 0)
+#define DANUBE_SSC_STATE_MS (1 << 1)
+#define DANUBE_SSC_STATE_BSY (1 << 13)
+#define DANUBE_SSC_STATE_RUE (1 << 12)
+#define DANUBE_SSC_STATE_TUE (1 << 11)
+#define DANUBE_SSC_STATE_AE (1 << 10)
+#define DANUBE_SSC_STATE_RE (1 << 9)
+#define DANUBE_SSC_STATE_TE (1 << 8)
+#define DANUBE_SSC_STATE_BC(value) (((( 1 << 5) - 1) & (value)) << 16)
+/***SSC Write Hardware Modified Control Register***/
+#define DANUBE_SSC_WHBSTATE ( 0x0018)
+#define DANUBE_SSC_WHBSTATE_SETBE (1 << 15)
+#define DANUBE_SSC_WHBSTATE_SETPE (1 << 14)
+#define DANUBE_SSC_WHBSTATE_SETRE (1 << 13)
+#define DANUBE_SSC_WHBSTATE_SETTE (1 << 12)
+#define DANUBE_SSC_WHBSTATE_CLRBE (1 << 11)
+#define DANUBE_SSC_WHBSTATE_CLRPE (1 << 10)
+#define DANUBE_SSC_WHBSTATE_CLRRE (1 << 9)
+#define DANUBE_SSC_WHBSTATE_CLRTE (1 << 8)
+/***SSC Transmitter Buffer Register***/
+#define DANUBE_SSC_TB (0x0020)
+#define DANUBE_SSC_TB_TB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
+/***SSC Receiver Buffer Register***/
+#define DANUBE_SSC_RB (0x0024)
+#define DANUBE_SSC_RB_RB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
+/***SSC Receive FIFO Control Register***/
+#define DANUBE_SSC_RXFCON (0x0030)
+#define DANUBE_SSC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_RXFCON_RXTMEN (1 << 2)
+#define DANUBE_SSC_RXFCON_RXFLU (1 << 1)
+#define DANUBE_SSC_RXFCON_RXFEN (1 << 0)
+/***SSC Transmit FIFO Control Register***/
+#define DANUBE_SSC_TXFCON ( 0x0034)
+#define DANUBE_SSC_TXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_TXFCON_TXTMEN (1 << 2)
+#define DANUBE_SSC_TXFCON_TXFLU (1 << 1)
+#define DANUBE_SSC_TXFCON_TXFEN (1 << 0)
+/***SSC FIFO Status Register***/
+#define DANUBE_SSC_FSTAT (0x0038)
+#define DANUBE_SSC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_SSC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
+/***SSC Baudrate Timer Reload Register***/
+#define DANUBE_SSC_BR (0x0040)
+#define DANUBE_SSC_BR_BR_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
+#define DANUBE_SSC_BRSTAT (0x0044)
+#define DANUBE_SSC_SFCON (0x0060)
+#define DANUBE_SSC_SFSTAT (0x0064)
+#define DANUBE_SSC_GPOCON (0x0070)
+#define DANUBE_SSC_GPOSTAT (0x0074)
+#define DANUBE_SSC_WHBGPOSTAT (0x0078)
+#define DANUBE_SSC_RXREQ (0x0080)
+#define DANUBE_SSC_RXCNT (0x0084)
+/*DMA Registers in Bus Clock Domain*/
+#define DANUBE_SSC_DMA_CON (0x00EC)
+/*interrupt Node Registers in Bus Clock Domain*/
+#define DANUBE_SSC_IRNEN (0x00F4)
+#define DANUBE_SSC_IRNCR (0x00F8)
+#define DANUBE_SSC_IRNICR (0x00FC)
+#define DANUBE_SSC_IRN_FIR 0x8
+#define DANUBE_SSC_IRN_EIR 0x4
+#define DANUBE_SSC_IRN_RIR 0x2
+#define DANUBE_SSC_IRN_TIR 0x1
+
+#define DANUBE_SSC1_CLC ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC))
+#define DANUBE_SSC1_ID ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID))
+#define DANUBE_SSC1_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON))
+#define DANUBE_SSC1_STATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE))
+#define DANUBE_SSC1_WHBSTATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE))
+#define DANUBE_SSC1_TB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB))
+#define DANUBE_SSC1_RB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB))
+#define DANUBE_SSC1_FSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT))
+#define DANUBE_SSC1_PISEL ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL))
+#define DANUBE_SSC1_RXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON))
+#define DANUBE_SSC1_TXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON))
+#define DANUBE_SSC1_BR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR))
+#define DANUBE_SSC1_BRSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT))
+#define DANUBE_SSC1_SFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON))
+#define DANUBE_SSC1_SFSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT))
+#define DANUBE_SSC1_GPOCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON))
+#define DANUBE_SSC1_GPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT))
+#define DANUBE_SSC1_WHBGPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT))
+#define DANUBE_SSC1_RXREQ ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ))
+#define DANUBE_SSC1_RXCNT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT))
+#define DANUBE_SSC1_DMA_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON))
+#define DANUBE_SSC1_IRNEN ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN))
+#define DANUBE_SSC1_IRNICR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR))
+#define DANUBE_SSC1_IRNCR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR))
+
+/***********************************************************************/
+/* Module : GPIO register address and bits */
+/***********************************************************************/
+#define DANUBE_GPIO (0xBE100B00)
+/***Port 0 Data Output Register (0010H)***/
+#define DANUBE_GPIO_P0_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0010))
+/***Port 1 Data Output Register (0040H)***/
+#define DANUBE_GPIO_P1_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0040))
+/***Port 0 Data Input Register (0014H)***/
+#define DANUBE_GPIO_P0_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0014))
+/***Port 1 Data Input Register (0044H)***/
+#define DANUBE_GPIO_P1_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0044))
+/***Port 0 Direction Register (0018H)***/
+#define DANUBE_GPIO_P0_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0018))
+/***Port 1 Direction Register (0048H)***/
+#define DANUBE_GPIO_P1_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0048))
+/***Port 0 Alternate Function Select Register 0 (001C H) ***/
+#define DANUBE_GPIO_P0_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x001C))
+/***Port 1 Alternate Function Select Register 0 (004C H) ***/
+#define DANUBE_GPIO_P1_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x004C))
+/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
+#define DANUBE_GPIO_P0_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0020))
+/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
+#define DANUBE_GPIO_P1_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0050))
+/***Port 0 Open Drain Control Register (0024H)***/
+#define DANUBE_GPIO_P0_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0024))
+/***Port 1 Open Drain Control Register (0054H)***/
+#define DANUBE_GPIO_P1_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0054))
+/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
+#define DANUBE_GPIO_P0_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0028))
+/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
+#define DANUBE_GPIO_P1_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0058))
+/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
+#define DANUBE_GPIO_P0_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x002C))
+/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
+#define DANUBE_GPIO_P1_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x005C))
+/***Port 0 Pull Up Device Enable Register (0030 H)***/
+#define DANUBE_GPIO_P0_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0030))
+/***Port 1 Pull Up Device Enable Register (0060 H)***/
+#define DANUBE_GPIO_P1_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0060))
+/***********************************************************************/
+/* Module : CGU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_CGU (0xBF103000)
+/***********************************************************************/
+/***CGU Clock PLL0 ***/
+#define DANUBE_CGU_PLL0_CFG ((volatile u32*)(DANUBE_CGU+ 0x0004))
+/***CGU Clock PLL1 ***/
+#define DANUBE_CGU_PLL1_CFG ((volatile u32*)(DANUBE_CGU+ 0x0008))
+/***CGU Clock SYS Mux Register***/
+#define DANUBE_CGU_SYS ((volatile u32*)(DANUBE_CGU+ 0x0010))
+/***CGU Interface Clock Control Register***/
+#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
+/***CGU PCI Clock Control Register**/
+#define DANUBE_CGU_PCICR ((volatile u32*)(DANUBE_CGU+ 0x0034))
+#define CLOCK_60M 60000000
+#define CLOCK_83M 83333333
+#define CLOCK_111M 111111111
+#define CLOCK_133M 133333333
+#define CLOCK_167M 166666667
+#define CLOCK_333M 333333333
+
+/***********************************************************************/
+/* Module : MCD register address and bits */
+/***********************************************************************/
+#define DANUBE_MCD (KSEG1+0x1F106000)
+
+/***Manufacturer Identification Register***/
+#define DANUBE_MCD_MANID ((volatile u32*)(DANUBE_MCD+ 0x0024))
+#define DANUBE_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5)
+
+/***Chip Identification Register***/
+#define DANUBE_MCD_CHIPID ((volatile u32*)(DANUBE_MCD+ 0x0028))
+#define DANUBE_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
+#define DANUBE_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1))
+#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
+#define DANUBE_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1))
+#define DANUBE_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1)
+
+#define DANUBE_CHIPID_STANDARD 0x00EB
+#define DANUBE_CHIPID_YANGTSE 0x00ED
+
+/***Redesign Tracing Identification Register***/
+#define DANUBE_MCD_RTID ((volatile u32*)(DANUBE_MCD+ 0x002C))
+#define DANUBE_MCD_RTID_LC (1 << 15)
+#define DANUBE_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : EBU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_EBU (0xBE105300)
+
+/***********************************************************************/
+
+/***EBU Clock Control Register***/
+#define DANUBE_EBU_CLC ((volatile u32*)(DANUBE_EBU+ 0x0000))
+#define DANUBE_EBU_CLC_DISS (1 << 1)
+#define DANUBE_EBU_CLC_DISR (1 << 0)
+
+/***EBU Global Control Register***/
+#define DANUBE_EBU_CON ((volatile u32*)(DANUBE_EBU+ 0x0010))
+#define DANUBE_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20)
+#define DANUBE_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16)
+#define DANUBE_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_EBU_CON_ARBSYNC (1 << 5)
+#define DANUBE_EBU_CON_1 (1 << 3)
+
+/***EBU Address Select Register 0***/
+#define DANUBE_EBU_ADDSEL0 ((volatile u32*)(DANUBE_EBU+ 0x0020))
+#define DANUBE_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL0_MIRRORE (1 << 1)
+#define DANUBE_EBU_ADDSEL0_REGEN (1 << 0)
+
+/***EBU Address Select Register 1***/
+#define DANUBE_EBU_ADDSEL1 ((volatile u32*)(DANUBE_EBU+ 0x0024))
+#define DANUBE_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL1_MIRRORE (1 << 1)
+#define DANUBE_EBU_ADDSEL1_REGEN (1 << 0)
+
+/***EBU Address Select Register 2***/
+#define DANUBE_EBU_ADDSEL2 ((volatile u32*)(DANUBE_EBU+ 0x0028))
+#define DANUBE_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL2_MIRRORE (1 << 1)
+#define DANUBE_EBU_ADDSEL2_REGEN (1 << 0)
+
+/***EBU Address Select Register 3***/
+#define DANUBE_EBU_ADDSEL3 ((volatile u32*)(DANUBE_EBU+ 0x0028))
+#define DANUBE_EBU_ADDSEL3_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
+#define DANUBE_EBU_ADDSEL3_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_EBU_ADDSEL3_MIRRORE (1 << 1)
+#define DANUBE_EBU_ADDSEL3_REGEN (1 << 0)
+
+/***EBU Bus Configuration Register 0***/
+#define DANUBE_EBU_BUSCON0 ((volatile u32*)(DANUBE_EBU+ 0x0060))
+#define DANUBE_EBU_BUSCON0_WRDIS (1 << 31)
+#define DANUBE_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON0_WAITINV (1 << 19)
+#define DANUBE_EBU_BUSCON0_SETUP (1 << 18)
+#define DANUBE_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 1***/
+#define DANUBE_EBU_BUSCON1 ((volatile u32*)(DANUBE_EBU+ 0x0064))
+#define DANUBE_EBU_BUSCON1_WRDIS (1 << 31)
+#define DANUBE_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON1_WAITINV (1 << 19)
+#define DANUBE_EBU_BUSCON1_SETUP (1 << 18)
+#define DANUBE_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***EBU Bus Configuration Register 2***/
+#define DANUBE_EBU_BUSCON2 ((volatile u32*)(DANUBE_EBU+ 0x0068))
+#define DANUBE_EBU_BUSCON2_WRDIS (1 << 31)
+#define DANUBE_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
+#define DANUBE_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
+#define DANUBE_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
+#define DANUBE_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
+#define DANUBE_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
+#define DANUBE_EBU_BUSCON2_WAITINV (1 << 19)
+#define DANUBE_EBU_BUSCON2_SETUP (1 << 18)
+#define DANUBE_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
+#define DANUBE_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
+#define DANUBE_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
+#define DANUBE_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+#define DANUBE_EBU_PCC_CON ((volatile u32*)(DANUBE_EBU+ 0x0090))
+#define DANUBE_EBU_PCC_STAT ((volatile u32*)(DANUBE_EBU+ 0x0094))
+#define DANUBE_EBU_PCC_ISTAT ((volatile u32*)(DANUBE_EBU+ 0x00A0))
+#define DANUBE_EBU_PCC_IEN ((volatile u32*)(DANUBE_EBU+ 0x00A4))
+/***********************************************************************/
+/* Module : SDRAM register address and bits */
+/***********************************************************************/
+
+#define DANUBE_SDRAM (0xBF800000)
+/***********************************************************************/
+
+/***MC Access Error Cause Register***/
+#define DANUBE_SDRAM_MC_ERRCAUSE ((volatile u32*)(DANUBE_SDRAM+ 0x0100))
+#define DANUBE_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
+#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN)
+
+/***MC Access Error Address Register***/
+#define DANUBE_SDRAM_MC_ERRADDR ((volatile u32*)(DANUBE_SDRAM+ 0x0108))
+#define DANUBE_SDRAM_MC_ERRADDR_ADDR
+
+/***MC I/O General Purpose Register***/
+#define DANUBE_SDRAM_MC_IOGP ((volatile u32*)(DANUBE_SDRAM+ 0x0800))
+#define DANUBE_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24)
+#define DANUBE_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20)
+#define DANUBE_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_IOGP_CPS (1 << 11)
+#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***MC Self Refresh Register***/
+#define DANUBE_SDRAM_MC_SELFRFSH ((volatile u32*)(DANUBE_SDRAM+ 0x0A00))
+#define DANUBE_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
+#define DANUBE_SDRAM_MC_SELFRFSH_PWD (1 << 0)
+#define DANUBE_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2)
+
+/***MC Enable Register***/
+#define DANUBE_SDRAM_MC_CTRLENA ((volatile u32*)(DANUBE_SDRAM+ 0x1000))
+#define DANUBE_SDRAM_MC_CTRLENA_ENA (1 << 0)
+#define DANUBE_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1)
+
+/***MC Mode Register Setup Code***/
+#define DANUBE_SDRAM_MC_MRSCODE ((volatile u32*)(DANUBE_SDRAM+ 0x1008))
+#define DANUBE_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7)
+#define DANUBE_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_MRSCODE_WT (1 << 3)
+#define DANUBE_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***MC Configuration Data-word Width Register***/
+#define DANUBE_SDRAM_MC_CFGDW ((volatile u32*)(DANUBE_SDRAM+ 0x1010))
+#define DANUBE_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4)
+
+/***MC Configuration Physical Bank 0 Register***/
+#define DANUBE_SDRAM_MC_CFGPB0 ((volatile u32*)(DANUBE_SDRAM+ 0x1018))
+#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16)
+
+/***MC Latency Register***/
+#define DANUBE_SDRAM_MC_LATENCY ((volatile u32*)(DANUBE_SDRAM+ 0x1038))
+#define DANUBE_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12)
+#define DANUBE_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8)
+#define DANUBE_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20)
+
+/***MC Refresh Cycle Time Register***/
+#define DANUBE_SDRAM_MC_TREFRESH ((volatile u32*)(DANUBE_SDRAM+ 0x1040))
+#define DANUBE_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0)
+#define DANUBE_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
+
+/***********************************************************************/
+/* Module : GPTC register address and bits */
+/***********************************************************************/
+
+#define DANUBE_GPTC (KSEG1 + 0x1E100A00)
+#define DANUBE_GPTC_CLC ((volatile u32*) (DANUBE_GPTC + 0x0000))
+#define DANUBE_GPTC_ID ((volatile u32*) (DANUBE_GPTC + 0x0008))
+#define DANUBE_GPTC_IRNEN ((volatile u32*) (DANUBE_GPTC + 0x00F4))
+#define DANUBE_GPTC_IRNICR ((volatile u32*) (DANUBE_GPTC + 0x00F8)
+#define DANUBE_GPTC_IRNCR ((volatile u32*) (DANUBE_GPTC + 0x00FC))
+
+#define DANUBE_GPTC_CON_1A ((volatile u32*) (DANUBE_GPTC + 0x0010))
+#define DANUBE_GPTC_RUN_1A ((volatile u32*) (DANUBE_GPTC + 0x0018))
+#define DANUBE_GPTC_RELOAD_1A ((volatile u32*) (DANUBE_GPTC + 0x0020))
+#define DANUBE_GPTC_COUNT_1A ((volatile u32*) (DANUBE_GPTC + 0x0028))
+
+#define DANUBE_GPTC_CON_1B ((volatile u32*) (DANUBE_GPTC + 0x0014))
+#define DANUBE_GPTC_RUN_1B ((volatile u32*) (DANUBE_GPTC + 0x001C))
+#define DANUBE_GPTC_RELOAD_1B ((volatile u32*) (DANUBE_GPTC + 0x0024))
+#define DANUBE_GPTC_COUNT_1B ((volatile u32*) (DANUBE_GPTC + 0x002C))
+
+#define DANUBE_GPTC_CON_2A ((volatile u32*) (DANUBE_GPTC + 0x0030))
+#define DANUBE_GPTC_RUN_2A ((volatile u32*) (DANUBE_GPTC + 0x0038))
+#define DANUBE_GPTC_RELOAD_2A ((volatile u32*) (DANUBE_GPTC + 0x0040))
+#define DANUBE_GPTC_COUNT_2A ((volatile u32*) (DANUBE_GPTC + 0x0048))
+
+#define DANUBE_GPTC_CON_2B ((volatile u32*) (DANUBE_GPTC + 0x0034))
+#define DANUBE_GPTC_RUN_2B ((volatile u32*) (DANUBE_GPTC + 0x003C))
+#define DANUBE_GPTC_RELOAD_2B ((volatile u32*) (DANUBE_GPTC + 0x0044))
+#define DANUBE_GPTC_COUNT_2B ((volatile u32*) (DANUBE_GPTC + 0x004C))
+
+/***********************************************************************/
+/* Module : GPTU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_GPTU (0xB8000300)
+/***********************************************************************/
+
+/***GPT Clock Control Register***/
+#define DANUBE_GPTU_GPT_CLC ((volatile u32*)(DANUBE_GPTU+ 0x0000))
+#define DANUBE_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_GPTU_GPT_CLC_DISS (1 << 1)
+#define DANUBE_GPTU_GPT_CLC_DISR (1 << 0)
+
+/***GPT Timer 3 Control Register***/
+#define DANUBE_GPTU_GPT_T3CON ((volatile u32*)(DANUBE_GPTU+ 0x0014))
+#define DANUBE_GPTU_GPT_T3CON_T3RDIR (1 << 15)
+#define DANUBE_GPTU_GPT_T3CON_T3CHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_T3CON_T3EDGE (1 << 13)
+#define DANUBE_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11)
+#define DANUBE_GPTU_GPT_T3CON_T3OTL (1 << 10)
+#define DANUBE_GPTU_GPT_T3CON_T3UD (1 << 7)
+#define DANUBE_GPTU_GPT_T3CON_T3R (1 << 6)
+#define DANUBE_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write Hardware Modified Timer 3 Control Register
+If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT3CON ((volatile u32*)(DANUBE_GPTU+ 0x004C))
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12)
+#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11)
+#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10)
+
+/***GPT Timer 2 Control Register***/
+#define DANUBE_GPTU_GPT_T2CON ((volatile u32*)(DANUBE_GPTU+ 0x0010))
+#define DANUBE_GPTU_GPT_T2CON_TxRDIR (1 << 15)
+#define DANUBE_GPTU_GPT_T2CON_TxCHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_T2CON_TxEDGE (1 << 13)
+#define DANUBE_GPTU_GPT_T2CON_TxIRDIS (1 << 12)
+#define DANUBE_GPTU_GPT_T2CON_TxRC (1 << 9)
+#define DANUBE_GPTU_GPT_T2CON_TxUD (1 << 7)
+#define DANUBE_GPTU_GPT_T2CON_TxR (1 << 6)
+#define DANUBE_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Control Register***/
+#define DANUBE_GPTU_GPT_T4CON ((volatile u32*)(DANUBE_GPTU+ 0x0018))
+#define DANUBE_GPTU_GPT_T4CON_TxRDIR (1 << 15)
+#define DANUBE_GPTU_GPT_T4CON_TxCHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_T4CON_TxEDGE (1 << 13)
+#define DANUBE_GPTU_GPT_T4CON_TxIRDIS (1 << 12)
+#define DANUBE_GPTU_GPT_T4CON_TxRC (1 << 9)
+#define DANUBE_GPTU_GPT_T4CON_TxUD (1 << 7)
+#define DANUBE_GPTU_GPT_T4CON_TxR (1 << 6)
+#define DANUBE_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 2 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT2CON ((volatile u32*)(DANUBE_GPTU+ 0x0048))
+#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12)
+
+/***GPT Write HW Modified Timer 4 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT4CON ((volatile u32*)(DANUBE_GPTU+ 0x0050))
+#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15)
+#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14)
+#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13)
+#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12)
+
+/***GPT Capture Reload Register***/
+#define DANUBE_GPTU_GPT_CAPREL ((volatile u32*)(DANUBE_GPTU+ 0x0030))
+#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 2 Register***/
+#define DANUBE_GPTU_GPT_T2 ((volatile u32*)(DANUBE_GPTU+ 0x0034))
+#define DANUBE_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 3 Register***/
+#define DANUBE_GPTU_GPT_T3 ((volatile u32*)(DANUBE_GPTU+ 0x0038))
+#define DANUBE_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 4 Register***/
+#define DANUBE_GPTU_GPT_T4 ((volatile u32*)(DANUBE_GPTU+ 0x003C))
+#define DANUBE_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 5 Register***/
+#define DANUBE_GPTU_GPT_T5 ((volatile u32*)(DANUBE_GPTU+ 0x0040))
+#define DANUBE_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Register***/
+#define DANUBE_GPTU_GPT_T6 ((volatile u32*)(DANUBE_GPTU+ 0x0044))
+#define DANUBE_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
+
+/***GPT Timer 6 Control Register***/
+#define DANUBE_GPTU_GPT_T6CON ((volatile u32*)(DANUBE_GPTU+ 0x0020))
+#define DANUBE_GPTU_GPT_T6CON_T6SR (1 << 15)
+#define DANUBE_GPTU_GPT_T6CON_T6CLR (1 << 14)
+#define DANUBE_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11)
+#define DANUBE_GPTU_GPT_T6CON_T6OTL (1 << 10)
+#define DANUBE_GPTU_GPT_T6CON_T6UD (1 << 7)
+#define DANUBE_GPTU_GPT_T6CON_T6R (1 << 6)
+#define DANUBE_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***GPT Write HW Modified Timer 6 Control Register If set
+ and clear bit are written concurrently with 1, the associated bit is not changed.***/
+#define DANUBE_GPTU_GPT_WHBT6CON ((volatile u32*)(DANUBE_GPTU+ 0x0054))
+#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11)
+#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10)
+
+/***GPT Timer 5 Control Register***/
+#define DANUBE_GPTU_GPT_T5CON ((volatile u32*)(DANUBE_GPTU+ 0x001C))
+#define DANUBE_GPTU_GPT_T5CON_T5SC (1 << 15)
+#define DANUBE_GPTU_GPT_T5CON_T5CLR (1 << 14)
+#define DANUBE_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12)
+#define DANUBE_GPTU_GPT_T5CON_T5CC (1 << 11)
+#define DANUBE_GPTU_GPT_T5CON_CT3 (1 << 10)
+#define DANUBE_GPTU_GPT_T5CON_T5RC (1 << 9)
+#define DANUBE_GPTU_GPT_T5CON_T5UDE (1 << 8)
+#define DANUBE_GPTU_GPT_T5CON_T5UD (1 << 7)
+#define DANUBE_GPTU_GPT_T5CON_T5R (1 << 6)
+#define DANUBE_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3)
+#define DANUBE_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : IOM register address and bits */
+/***********************************************************************/
+
+#define DANUBE_IOM (0xBF105000)
+/***********************************************************************/
+
+/***Receive FIFO***/
+#define DANUBE_IOM_RFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
+#define DANUBE_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Transmit FIFO***/
+#define DANUBE_IOM_XFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
+#define DANUBE_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Interrupt Status Register HDLC***/
+#define DANUBE_IOM_ISTAH ((volatile u32*)(DANUBE_IOM+ 0x0080))
+#define DANUBE_IOM_ISTAH_RME (1 << 7)
+#define DANUBE_IOM_ISTAH_RPF (1 << 6)
+#define DANUBE_IOM_ISTAH_RFO (1 << 5)
+#define DANUBE_IOM_ISTAH_XPR (1 << 4)
+#define DANUBE_IOM_ISTAH_XMR (1 << 3)
+#define DANUBE_IOM_ISTAH_XDU (1 << 2)
+
+/***Interrupt Mask Register HDLC***/
+#define DANUBE_IOM_MASKH ((volatile u32*)(DANUBE_IOM+ 0x0080))
+#define DANUBE_IOM_MASKH_RME (1 << 7)
+#define DANUBE_IOM_MASKH_RPF (1 << 6)
+#define DANUBE_IOM_MASKH_RFO (1 << 5)
+#define DANUBE_IOM_MASKH_XPR (1 << 4)
+#define DANUBE_IOM_MASKH_XMR (1 << 3)
+#define DANUBE_IOM_MASKH_XDU (1 << 2)
+
+/***Status Register***/
+#define DANUBE_IOM_STAR ((volatile u32*)(DANUBE_IOM+ 0x0084))
+#define DANUBE_IOM_STAR_XDOV (1 << 7)
+#define DANUBE_IOM_STAR_XFW (1 << 6)
+#define DANUBE_IOM_STAR_RACI (1 << 3)
+#define DANUBE_IOM_STAR_XACI (1 << 1)
+
+/***Command Register***/
+#define DANUBE_IOM_CMDR ((volatile u32*)(DANUBE_IOM+ 0x0084))
+#define DANUBE_IOM_CMDR_RMC (1 << 7)
+#define DANUBE_IOM_CMDR_RRES (1 << 6)
+#define DANUBE_IOM_CMDR_XTF (1 << 3)
+#define DANUBE_IOM_CMDR_XME (1 << 1)
+#define DANUBE_IOM_CMDR_XRES (1 << 0)
+
+/***Mode Register***/
+#define DANUBE_IOM_MODEH ((volatile u32*)(DANUBE_IOM+ 0x0088))
+#define DANUBE_IOM_MODEH_MDS2 (1 << 7)
+#define DANUBE_IOM_MODEH_MDS1 (1 << 6)
+#define DANUBE_IOM_MODEH_MDS0 (1 << 5)
+#define DANUBE_IOM_MODEH_RAC (1 << 3)
+#define DANUBE_IOM_MODEH_DIM2 (1 << 2)
+#define DANUBE_IOM_MODEH_DIM1 (1 << 1)
+#define DANUBE_IOM_MODEH_DIM0 (1 << 0)
+
+/***Extended Mode Register***/
+#define DANUBE_IOM_EXMR ((volatile u32*)(DANUBE_IOM+ 0x008C))
+#define DANUBE_IOM_EXMR_XFBS (1 << 7)
+#define DANUBE_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5)
+#define DANUBE_IOM_EXMR_SRA (1 << 4)
+#define DANUBE_IOM_EXMR_XCRC (1 << 3)
+#define DANUBE_IOM_EXMR_RCRC (1 << 2)
+#define DANUBE_IOM_EXMR_ITF (1 << 0)
+
+/***SAPI1 Register***/
+#define DANUBE_IOM_SAP1 ((volatile u32*)(DANUBE_IOM+ 0x0094))
+#define DANUBE_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_SAP1_MHA (1 << 0)
+
+/***Receive Frame Byte Count Low***/
+#define DANUBE_IOM_RBCL ((volatile u32*)(DANUBE_IOM+ 0x0098))
+#define DANUBE_IOM_RBCL_RBC(value) (1 << value)
+
+/***SAPI2 Register***/
+#define DANUBE_IOM_SAP2 ((volatile u32*)(DANUBE_IOM+ 0x0098))
+#define DANUBE_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_SAP2_MLA (1 << 0)
+
+/***Receive Frame Byte Count High***/
+#define DANUBE_IOM_RBCH ((volatile u32*)(DANUBE_IOM+ 0x009C))
+#define DANUBE_IOM_RBCH_OV (1 << 4)
+#define DANUBE_IOM_RBCH_RBC11 (1 << 3)
+#define DANUBE_IOM_RBCH_RBC10 (1 << 2)
+#define DANUBE_IOM_RBCH_RBC9 (1 << 1)
+#define DANUBE_IOM_RBCH_RBC8 (1 << 0)
+
+/***TEI1 Register 1***/
+#define DANUBE_IOM_TEI1 ((volatile u32*)(DANUBE_IOM+ 0x009C))
+#define DANUBE_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1)
+#define DANUBE_IOM_TEI1_EA (1 << 0)
+
+/***Receive Status Register***/
+#define DANUBE_IOM_RSTA ((volatile u32*)(DANUBE_IOM+ 0x00A0))
+#define DANUBE_IOM_RSTA_VFR (1 << 7)
+#define DANUBE_IOM_RSTA_RDO (1 << 6)
+#define DANUBE_IOM_RSTA_CRC (1 << 5)
+#define DANUBE_IOM_RSTA_RAB (1 << 4)
+#define DANUBE_IOM_RSTA_SA1 (1 << 3)
+#define DANUBE_IOM_RSTA_SA0 (1 << 2)
+#define DANUBE_IOM_RSTA_TA (1 << 0)
+#define DANUBE_IOM_RSTA_CR (1 << 1)
+
+/***TEI2 Register***/
+#define DANUBE_IOM_TEI2 ((volatile u32*)(DANUBE_IOM+ 0x00A0))
+#define DANUBE_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1)
+#define DANUBE_IOM_TEI2_EA (1 << 0)
+
+/***Test Mode Register HDLC***/
+#define DANUBE_IOM_TMH ((volatile u32*)(DANUBE_IOM+ 0x00A4))
+#define DANUBE_IOM_TMH_TLP (1 << 0)
+
+/***Command/Indication Receive 0***/
+#define DANUBE_IOM_CIR0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
+#define DANUBE_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_IOM_CIR0_CIC0 (1 << 3)
+#define DANUBE_IOM_CIR0_CIC1 (1 << 2)
+#define DANUBE_IOM_CIR0_SG (1 << 1)
+#define DANUBE_IOM_CIR0_BAS (1 << 0)
+
+/***Command/Indication Transmit 0***/
+#define DANUBE_IOM_CIX0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
+#define DANUBE_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4)
+#define DANUBE_IOM_CIX0_TBA2 (1 << 3)
+#define DANUBE_IOM_CIX0_TBA1 (1 << 2)
+#define DANUBE_IOM_CIX0_TBA0 (1 << 1)
+#define DANUBE_IOM_CIX0_BAC (1 << 0)
+
+/***Command/Indication Receive 1***/
+#define DANUBE_IOM_CIR1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
+#define DANUBE_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+
+/***Command/Indication Transmit 1***/
+#define DANUBE_IOM_CIX1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
+#define DANUBE_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2)
+#define DANUBE_IOM_CIX1_CICW (1 << 1)
+#define DANUBE_IOM_CIX1_CI1E (1 << 0)
+
+/***Controller Data Access Reg. (CH10)***/
+#define DANUBE_IOM_CDA10 ((volatile u32*)(DANUBE_IOM+ 0x0100))
+#define DANUBE_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH11)***/
+#define DANUBE_IOM_CDA11 ((volatile u32*)(DANUBE_IOM+ 0x0104))
+#define DANUBE_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH20)***/
+#define DANUBE_IOM_CDA20 ((volatile u32*)(DANUBE_IOM+ 0x0108))
+#define DANUBE_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Controller Data Access Reg. (CH21)***/
+#define DANUBE_IOM_CDA21 ((volatile u32*)(DANUBE_IOM+ 0x010C))
+#define DANUBE_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define DANUBE_IOM_CDA_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0110))
+#define DANUBE_IOM_CDA_TSDP10_DPS (1 << 7)
+#define DANUBE_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define DANUBE_IOM_CDA_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0114))
+#define DANUBE_IOM_CDA_TSDP11_DPS (1 << 7)
+#define DANUBE_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define DANUBE_IOM_CDA_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0118))
+#define DANUBE_IOM_CDA_TSDP20_DPS (1 << 7)
+#define DANUBE_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define DANUBE_IOM_CDA_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x011C))
+#define DANUBE_IOM_CDA_TSDP21_DPS (1 << 7)
+#define DANUBE_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH10)***/
+#define DANUBE_IOM_CO_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0120))
+#define DANUBE_IOM_CO_TSDP10_DPS (1 << 7)
+#define DANUBE_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH11)***/
+#define DANUBE_IOM_CO_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0124))
+#define DANUBE_IOM_CO_TSDP11_DPS (1 << 7)
+#define DANUBE_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH20)***/
+#define DANUBE_IOM_CO_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0128))
+#define DANUBE_IOM_CO_TSDP20_DPS (1 << 7)
+#define DANUBE_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Time Slot and Data Port Sel. (CH21)***/
+#define DANUBE_IOM_CO_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x012C))
+#define DANUBE_IOM_CO_TSDP21_DPS (1 << 7)
+#define DANUBE_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define DANUBE_IOM_CDA1_CR ((volatile u32*)(DANUBE_IOM+ 0x0138))
+#define DANUBE_IOM_CDA1_CR_EN_TBM (1 << 5)
+#define DANUBE_IOM_CDA1_CR_EN_I1 (1 << 4)
+#define DANUBE_IOM_CDA1_CR_EN_I0 (1 << 3)
+#define DANUBE_IOM_CDA1_CR_EN_O1 (1 << 2)
+#define DANUBE_IOM_CDA1_CR_EN_O0 (1 << 1)
+#define DANUBE_IOM_CDA1_CR_SWAP (1 << 0)
+
+/***Ctrl. Reg. Contr. Data Access CH1x***/
+#define DANUBE_IOM_CDA2_CR ((volatile u32*)(DANUBE_IOM+ 0x013C))
+#define DANUBE_IOM_CDA2_CR_EN_TBM (1 << 5)
+#define DANUBE_IOM_CDA2_CR_EN_I1 (1 << 4)
+#define DANUBE_IOM_CDA2_CR_EN_I0 (1 << 3)
+#define DANUBE_IOM_CDA2_CR_EN_O1 (1 << 2)
+#define DANUBE_IOM_CDA2_CR_EN_O0 (1 << 1)
+#define DANUBE_IOM_CDA2_CR_SWAP (1 << 0)
+
+/***Control Register B-Channel Data***/
+#define DANUBE_IOM_BCHA_CR ((volatile u32*)(DANUBE_IOM+ 0x0144))
+#define DANUBE_IOM_BCHA_CR_EN_BC2 (1 << 4)
+#define DANUBE_IOM_BCHA_CR_EN_BC1 (1 << 3)
+
+/***Control Register B-Channel Data***/
+#define DANUBE_IOM_BCHB_CR ((volatile u32*)(DANUBE_IOM+ 0x0148))
+#define DANUBE_IOM_BCHB_CR_EN_BC2 (1 << 4)
+#define DANUBE_IOM_BCHB_CR_EN_BC1 (1 << 3)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define DANUBE_IOM_DCI_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
+#define DANUBE_IOM_DCI_CR_DPS_CI1 (1 << 7)
+#define DANUBE_IOM_DCI_CR_EN_CI1 (1 << 6)
+#define DANUBE_IOM_DCI_CR_EN_D (1 << 5)
+
+/***Control Reg. for HDLC and CI1 Data***/
+#define DANUBE_IOM_DCIC_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
+#define DANUBE_IOM_DCIC_CR_DPS_CI0 (1 << 7)
+#define DANUBE_IOM_DCIC_CR_EN_CI0 (1 << 6)
+#define DANUBE_IOM_DCIC_CR_DPS_D (1 << 5)
+
+/***Control Reg. Serial Data Strobe x***/
+#define DANUBE_IOM_SDS_CR ((volatile u32*)(DANUBE_IOM+ 0x0154))
+#define DANUBE_IOM_SDS_CR_ENS_TSS (1 << 7)
+#define DANUBE_IOM_SDS_CR_ENS_TSS_1 (1 << 6)
+#define DANUBE_IOM_SDS_CR_ENS_TSS_3 (1 << 5)
+#define DANUBE_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
+
+/***Control Register IOM Data***/
+#define DANUBE_IOM_IOM_CR ((volatile u32*)(DANUBE_IOM+ 0x015C))
+#define DANUBE_IOM_IOM_CR_SPU (1 << 7)
+#define DANUBE_IOM_IOM_CR_CI_CS (1 << 5)
+#define DANUBE_IOM_IOM_CR_TIC_DIS (1 << 4)
+#define DANUBE_IOM_IOM_CR_EN_BCL (1 << 3)
+#define DANUBE_IOM_IOM_CR_CLKM (1 << 2)
+#define DANUBE_IOM_IOM_CR_Res (1 << 1)
+#define DANUBE_IOM_IOM_CR_DIS_IOM (1 << 0)
+
+/***Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_STI ((volatile u32*)(DANUBE_IOM+ 0x0160))
+#define DANUBE_IOM_STI_STOV21 (1 << 7)
+#define DANUBE_IOM_STI_STOV20 (1 << 6)
+#define DANUBE_IOM_STI_STOV11 (1 << 5)
+#define DANUBE_IOM_STI_STOV10 (1 << 4)
+#define DANUBE_IOM_STI_STI21 (1 << 3)
+#define DANUBE_IOM_STI_STI20 (1 << 2)
+#define DANUBE_IOM_STI_STI11 (1 << 1)
+#define DANUBE_IOM_STI_STI10 (1 << 0)
+
+/***Acknowledge Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_ASTI ((volatile u32*)(DANUBE_IOM+ 0x0160))
+#define DANUBE_IOM_ASTI_ACK21 (1 << 3)
+#define DANUBE_IOM_ASTI_ACK20 (1 << 2)
+#define DANUBE_IOM_ASTI_ACK11 (1 << 1)
+#define DANUBE_IOM_ASTI_ACK10 (1 << 0)
+
+/***Mask Synchronous Transfer Interrupt***/
+#define DANUBE_IOM_MSTI ((volatile u32*)(DANUBE_IOM+ 0x0164))
+#define DANUBE_IOM_MSTI_STOV21 (1 << 7)
+#define DANUBE_IOM_MSTI_STOV20 (1 << 6)
+#define DANUBE_IOM_MSTI_STOV11 (1 << 5)
+#define DANUBE_IOM_MSTI_STOV10 (1 << 4)
+#define DANUBE_IOM_MSTI_STI21 (1 << 3)
+#define DANUBE_IOM_MSTI_STI20 (1 << 2)
+#define DANUBE_IOM_MSTI_STI11 (1 << 1)
+#define DANUBE_IOM_MSTI_STI10 (1 << 0)
+
+/***Configuration Register for Serial Data Strobes***/
+#define DANUBE_IOM_SDS_CONF ((volatile u32*)(DANUBE_IOM+ 0x0168))
+#define DANUBE_IOM_SDS_CONF_SDS_BCL (1 << 0)
+
+/***Monitoring CDA Bits***/
+#define DANUBE_IOM_MCDA ((volatile u32*)(DANUBE_IOM+ 0x016C))
+#define DANUBE_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6)
+#define DANUBE_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4)
+#define DANUBE_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2)
+#define DANUBE_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : ASC0 register address and bits */
+/***********************************************************************/
+#define DANUBE_ASC0 (KSEG1+0x1E100400)
+/***********************************************************************/
+#define DANUBE_ASC0_TBUF ((volatile u32*)(DANUBE_ASC0 + 0x0020))
+#define DANUBE_ASC0_RBUF ((volatile u32*)(DANUBE_ASC0 + 0x0024))
+#define DANUBE_ASC0_FSTAT ((volatile u32*)(DANUBE_ASC0 + 0x0048))
+#define DANUBE_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
+#define DANUBE_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
+#define DANUBE_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
+#define DANUBE_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : ASC1 register address and bits */
+/***********************************************************************/
+
+#define DANUBE_ASC1 (KSEG1+0x1E100C00)
+/***********************************************************************/
+/***ASC Clock Control Register***/
+#define DANUBE_ASC1_CLC ((volatile u32*)(DANUBE_ASC1+ 0x0000))
+#define DANUBE_ASC1_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_ASC1_CLC_DISS (1 << 1)
+#define DANUBE_ASC1_CLC_DISR (1 << 0)
+
+/***ASC Port Input Select Register***/
+#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004))
+#define DANUBE_ASC1_PISEL ((volatile u32*)(DANUBE_ASC1+ 0x0004))
+#define DANUBE_ASC1_PISEL_RIS (1 << 0)
+
+/***ASC Control Register***/
+#define DANUBE_ASC1_CON ((volatile u32*)(DANUBE_ASC1+ 0x0010))
+#define DANUBE_ASC1_CON_BEN (1 << 20)
+#define DANUBE_ASC1_CON_TOEN (1 << 20)
+#define DANUBE_ASC1_CON_ROEN (1 << 19)
+#define DANUBE_ASC1_CON_RUEN (1 << 18)
+#define DANUBE_ASC1_CON_FEN (1 << 17)
+#define DANUBE_ASC1_CON_PAL (1 << 16)
+#define DANUBE_ASC1_CON_R (1 << 15)
+#define DANUBE_ASC1_CON_ACO (1 << 14)
+#define DANUBE_ASC1_CON_LB (1 << 13)
+#define DANUBE_ASC1_CON_ERCLK (1 << 10)
+#define DANUBE_ASC1_CON_FDE (1 << 9)
+#define DANUBE_ASC1_CON_BRS (1 << 8)
+#define DANUBE_ASC1_CON_STP (1 << 7)
+#define DANUBE_ASC1_CON_SP (1 << 6)
+#define DANUBE_ASC1_CON_ODD (1 << 5)
+#define DANUBE_ASC1_CON_PEN (1 << 4)
+#define DANUBE_ASC1_CON_M(value) (((( 1 << 3) - 1) & (value)) << 0)
+
+/***ASC Staus Register***/
+#define DANUBE_ASC1_STATE ((volatile u32*)(DANUBE_ASC1+ 0x0014))
+/***ASC Write Hardware Modified Control Register***/
+#define DANUBE_ASC1_WHBSTATE ((volatile u32*)(DANUBE_ASC1+ 0x0018))
+#define DANUBE_ASC1_WHBSTATE_SETBE (1 << 113)
+#define DANUBE_ASC1_WHBSTATE_SETTOE (1 << 12)
+#define DANUBE_ASC1_WHBSTATE_SETROE (1 << 11)
+#define DANUBE_ASC1_WHBSTATE_SETRUE (1 << 10)
+#define DANUBE_ASC1_WHBSTATE_SETFE (1 << 19)
+#define DANUBE_ASC1_WHBSTATE_SETPE (1 << 18)
+#define DANUBE_ASC1_WHBSTATE_CLRBE (1 << 17)
+#define DANUBE_ASC1_WHBSTATE_CLRTOE (1 << 6)
+#define DANUBE_ASC1_WHBSTATE_CLRROE (1 << 5)
+#define DANUBE_ASC1_WHBSTATE_CLRRUE (1 << 4)
+#define DANUBE_ASC1_WHBSTATE_CLRFE (1 << 3)
+#define DANUBE_ASC1_WHBSTATE_CLRPE (1 << 2)
+#define DANUBE_ASC1_WHBSTATE_SETREN (1 << 1)
+#define DANUBE_ASC1_WHBSTATE_CLRREN (1 << 0)
+
+/***ASC Baudrate Timer/Reload Register***/
+#define DANUBE_ASC1_BG ((volatile u32*)(DANUBE_ASC1+ 0x0050))
+#define DANUBE_ASC1_BG_BR_VALUE(value) (((( 1 << 13) - 1) & (value)) << 0)
+
+/***ASC Fractional Divider Register***/
+#define DANUBE_ASC1_FDV ((volatile u32*)(DANUBE_ASC1+ 0x0018))
+#define DANUBE_ASC1_FDV_FD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Transmit Buffer Register***/
+#define DANUBE_ASC1_TBUF ((volatile u32*)(DANUBE_ASC1+ 0x0020))
+#define DANUBE_ASC1_TBUF_TD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Receive Buffer Register***/
+#define DANUBE_ASC1_RBUF ((volatile u32*)(DANUBE_ASC1+ 0x0024))
+#define DANUBE_ASC1_RBUF_RD_VALUE(value) (((( 1 << 9) - 1) & (value)) << 0)
+
+/***ASC Autobaud Control Register***/
+#define DANUBE_ASC1_ABCON ((volatile u32*)(DANUBE_ASC1+ 0x0030))
+#define DANUBE_ASC1_ABCON_RXINV (1 << 11)
+#define DANUBE_ASC1_ABCON_TXINV (1 << 10)
+#define DANUBE_ASC1_ABCON_ABEM(value) (((( 1 << 2) - 1) & (value)) << 8)
+#define DANUBE_ASC1_ABCON_FCDETEN (1 << 4)
+#define DANUBE_ASC1_ABCON_ABDETEN (1 << 3)
+#define DANUBE_ASC1_ABCON_ABSTEN (1 << 2)
+#define DANUBE_ASC1_ABCON_AUREN (1 << 1)
+#define DANUBE_ASC1_ABCON_ABEN (1 << 0)
+
+/***Receive FIFO Control Register***/
+#define DANUBE_ASC1_RXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0040))
+#define DANUBE_ASC1_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC1_RXFCON_RXFFLU (1 << 1)
+#define DANUBE_ASC1_RXFCON_RXFEN (1 << 0)
+
+/***Transmit FIFO Control Register***/
+#define DANUBE_ASC1_TXFCON ((volatile u32*)(DANUBE_ASC1+ 0x0044))
+#define DANUBE_ASC1_TXFCON_TXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC1_TXFCON_TXFFLU (1 << 1)
+#define DANUBE_ASC1_TXFCON_TXFEN (1 << 0)
+
+/***FIFO Status Register***/
+#define DANUBE_ASC1_FSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0048))
+#define DANUBE_ASC1_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC1_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
+#define DANUBE_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
+#define DANUBE_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
+#define DANUBE_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
+#define DANUBE_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
+#define DANUBE_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
+
+/***ASC Autobaud Status Register***/
+#define DANUBE_ASC1_ABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x0034))
+#define DANUBE_ASC1_ABSTAT_DETWAIT (1 << 4)
+#define DANUBE_ASC1_ABSTAT_SCCDET (1 << 3)
+#define DANUBE_ASC1_ABSTAT_SCSDET (1 << 2)
+#define DANUBE_ASC1_ABSTAT_FCCDET (1 << 1)
+#define DANUBE_ASC1_ABSTAT_FCSDET (1 << 0)
+
+/***ASC Write HW Modified Autobaud Status Register***/
+#define DANUBE_ASC1_WHBABSTAT ((volatile u32*)(DANUBE_ASC1+ 0x003C))
+#define DANUBE_ASC1_WHBABSTAT_SETDETWAIT (1 << 9)
+#define DANUBE_ASC1_WHBABSTAT_CLRDETWAIT (1 << 8)
+#define DANUBE_ASC1_WHBABSTAT_SETSCCDET (1 << 7)
+#define DANUBE_ASC1_WHBABSTAT_CLRSCCDET (1 << 6)
+#define DANUBE_ASC1_WHBABSTAT_SETSCSDET (1 << 5)
+#define DANUBE_ASC1_WHBABSTAT_CLRSCSDET (1 << 4)
+#define DANUBE_ASC1_WHBABSTAT_SETFCCDET (1 << 3)
+#define DANUBE_ASC1_WHBABSTAT_CLRFCCDET (1 << 2)
+#define DANUBE_ASC1_WHBABSTAT_SETFCSDET (1 << 1)
+#define DANUBE_ASC1_WHBABSTAT_CLRFCSDET (1 << 0)
+
+/***ASC IRNCR0 **/
+#define DANUBE_ASC1_IRNREN ((volatile u32*)(DANUBE_ASC1+ 0x00F4))
+#define DANUBE_ASC1_IRNICR ((volatile u32*)(DANUBE_ASC1+ 0x00FC))
+/***ASC IRNCR1 **/
+#define DANUBE_ASC1_IRNCR ((volatile u32*)(DANUBE_ASC1+ 0x00F8))
+#define ASC_IRNCR_TIR 0x4
+#define ASC_IRNCR_RIR 0x2
+#define ASC_IRNCR_EIR 0x4
+
+/***********************************************************************/
+/* Module : DMA register address and bits */
+/***********************************************************************/
+
+#define DANUBE_DMA (0xBE104100)
+/***********************************************************************/
+
+#define DANUBE_DMA_BASE DANUBE_DMA
+#define DANUBE_DMA_CLC (volatile u32*)DANUBE_DMA_BASE
+#define DANUBE_DMA_ID (volatile u32*)(DANUBE_DMA_BASE+0x08)
+#define DANUBE_DMA_CTRL (volatile u32*)(DANUBE_DMA_BASE+0x10)
+#define DANUBE_DMA_CPOLL (volatile u32*)(DANUBE_DMA_BASE+0x14)
+#define DANUBE_DMA_CS (volatile u32*)(DANUBE_DMA_BASE+0x18)
+#define DANUBE_DMA_CCTRL (volatile u32*)(DANUBE_DMA_BASE+0x1C)
+#define DANUBE_DMA_CDBA (volatile u32*)(DANUBE_DMA_BASE+0x20)
+#define DANUBE_DMA_CDLEN (volatile u32*)(DANUBE_DMA_BASE+0x24)
+#define DANUBE_DMA_CIS (volatile u32*)(DANUBE_DMA_BASE+0x28)
+#define DANUBE_DMA_CIE (volatile u32*)(DANUBE_DMA_BASE+0x2C)
+
+#define DANUBE_DMA_PS (volatile u32*)(DANUBE_DMA_BASE+0x40)
+#define DANUBE_DMA_PCTRL (volatile u32*)(DANUBE_DMA_BASE+0x44)
+
+#define DANUBE_DMA_IRNEN (volatile u32*)(DANUBE_DMA_BASE+0xf4)
+#define DANUBE_DMA_IRNCR (volatile u32*)(DANUBE_DMA_BASE+0xf8)
+#define DANUBE_DMA_IRNICR (volatile u32*)(DANUBE_DMA_BASE+0xfc)
+/***********************************************************************/
+/* Module : Debug register address and bits */
+/***********************************************************************/
+
+#define DANUBE_Debug (0xBF106000)
+/***********************************************************************/
+
+/***MCD Break Bus Switch Register***/
+#define DANUBE_Debug_MCD_BBS ((volatile u32*)(DANUBE_Debug+ 0x0000))
+#define DANUBE_Debug_MCD_BBS_BTP1 (1 << 19)
+#define DANUBE_Debug_MCD_BBS_BTP0 (1 << 18)
+#define DANUBE_Debug_MCD_BBS_BSP1 (1 << 17)
+#define DANUBE_Debug_MCD_BBS_BSP0 (1 << 16)
+#define DANUBE_Debug_MCD_BBS_BT5EN (1 << 15)
+#define DANUBE_Debug_MCD_BBS_BT4EN (1 << 14)
+#define DANUBE_Debug_MCD_BBS_BT5 (1 << 13)
+#define DANUBE_Debug_MCD_BBS_BT4 (1 << 12)
+#define DANUBE_Debug_MCD_BBS_BS5EN (1 << 7)
+#define DANUBE_Debug_MCD_BBS_BS4EN (1 << 6)
+#define DANUBE_Debug_MCD_BBS_BS5 (1 << 5)
+#define DANUBE_Debug_MCD_BBS_BS4 (1 << 4)
+
+/***MCD Multiplexer Control Register***/
+#define DANUBE_Debug_MCD_MCR ((volatile u32*)(DANUBE_Debug+ 0x0008))
+#define DANUBE_Debug_MCD_MCR_MUX5 (1 << 4)
+#define DANUBE_Debug_MCD_MCR_MUX4 (1 << 3)
+#define DANUBE_Debug_MCD_MCR_MUX1 (1 << 0)
+
+/***********************************************************************/
+/* Module : SRAM register address and bits */
+/***********************************************************************/
+
+#define DANUBE_SRAM (0xBF980000)
+/***********************************************************************/
+
+/***SRAM Size Register***/
+#define DANUBE_SRAM_SRAM_SIZE ((volatile u32*)(DANUBE_SRAM+ 0x0800))
+#define DANUBE_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0)
+
+/***********************************************************************/
+/* Module : BIU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_BIU (0xBFA80000)
+/***********************************************************************/
+
+/***BIU Identification Register***/
+#define DANUBE_BIU_BIU_ID ((volatile u32*)(DANUBE_BIU+ 0x0000))
+#define DANUBE_BIU_BIU_ID_ARCH (1 << 16)
+#define DANUBE_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8)
+#define DANUBE_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0)
+
+/***BIU Access Error Cause Register***/
+#define DANUBE_BIU_BIU_ERRCAUSE ((volatile u32*)(DANUBE_BIU+ 0x0100))
+#define DANUBE_BIU_BIU_ERRCAUSE_ERR (1 << 31)
+#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
+#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
+
+/***BIU Access Error Address Register***/
+#define DANUBE_BIU_BIU_ERRADDR ((volatile u32*)(DANUBE_BIU+ 0x0108))
+#define DANUBE_BIU_BIU_ERRADDR_ADDR
+
+/***********************************************************************/
+/* Module : ICU register address and bits */
+/***********************************************************************/
+
+#define DANUBE_ICU (0xBF880200)
+/***********************************************************************/
+#define DANUBE_ICU_IM0_ISR ((volatile u32*)(DANUBE_ICU + 0x0000))
+#define DANUBE_ICU_IM0_IER ((volatile u32*)(DANUBE_ICU + 0x0008))
+#define DANUBE_ICU_IM0_IOSR ((volatile u32*)(DANUBE_ICU + 0x0010))
+#define DANUBE_ICU_IM0_IRSR ((volatile u32*)(DANUBE_ICU + 0x0018))
+#define DANUBE_ICU_IM0_IMR ((volatile u32*)(DANUBE_ICU + 0x0020))
+#define DANUBE_ICU_IM0_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM0_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM0_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM0_IR(value) (1 << (value))
+
+#define DANUBE_ICU_IM1_ISR ((volatile u32*)(DANUBE_ICU + 0x0028))
+#define DANUBE_ICU_IM1_IER ((volatile u32*)(DANUBE_ICU + 0x0030))
+#define DANUBE_ICU_IM1_IOSR ((volatile u32*)(DANUBE_ICU + 0x0038))
+#define DANUBE_ICU_IM1_IRSR ((volatile u32*)(DANUBE_ICU + 0x0040))
+#define DANUBE_ICU_IM1_IMR ((volatile u32*)(DANUBE_ICU + 0x0048))
+#define DANUBE_ICU_IM1_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM1_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM1_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM1_IR(value) (1 << (value))
+
+#define DANUBE_ICU_IM2_ISR ((volatile u32*)(DANUBE_ICU + 0x0050))
+#define DANUBE_ICU_IM2_IER ((volatile u32*)(DANUBE_ICU + 0x0058))
+#define DANUBE_ICU_IM2_IOSR ((volatile u32*)(DANUBE_ICU + 0x0060))
+#define DANUBE_ICU_IM2_IRSR ((volatile u32*)(DANUBE_ICU + 0x0068))
+#define DANUBE_ICU_IM2_IMR ((volatile u32*)(DANUBE_ICU + 0x0070))
+#define DANUBE_ICU_IM2_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM2_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM2_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM2_IR(value) (1 << (value))
+
+#define DANUBE_ICU_IM3_ISR ((volatile u32*)(DANUBE_ICU + 0x0078))
+#define DANUBE_ICU_IM3_IER ((volatile u32*)(DANUBE_ICU + 0x0080))
+#define DANUBE_ICU_IM3_IOSR ((volatile u32*)(DANUBE_ICU + 0x0088))
+#define DANUBE_ICU_IM3_IRSR ((volatile u32*)(DANUBE_ICU + 0x0090))
+#define DANUBE_ICU_IM3_IMR ((volatile u32*)(DANUBE_ICU + 0x0098))
+#define DANUBE_ICU_IM3_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM3_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM3_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM3_IR(value) (1 << (value))
+
+#define DANUBE_ICU_IM4_ISR ((volatile u32*)(DANUBE_ICU + 0x00A0))
+#define DANUBE_ICU_IM4_IER ((volatile u32*)(DANUBE_ICU + 0x00A8))
+#define DANUBE_ICU_IM4_IOSR ((volatile u32*)(DANUBE_ICU + 0x00B0))
+#define DANUBE_ICU_IM4_IRSR ((volatile u32*)(DANUBE_ICU + 0x00B8))
+#define DANUBE_ICU_IM4_IMR ((volatile u32*)(DANUBE_ICU + 0x00C0))
+#define DANUBE_ICU_IM4_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM4_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM4_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM4_IR(value) (1 << (value))
+
+#define DANUBE_ICU_IM5_ISR ((volatile u32*)(DANUBE_ICU + 0x00C8))
+#define DANUBE_ICU_IM5_IER ((volatile u32*)(DANUBE_ICU + 0x00D0))
+#define DANUBE_ICU_IM5_IOSR ((volatile u32*)(DANUBE_ICU + 0x00D8))
+#define DANUBE_ICU_IM5_IRSR ((volatile u32*)(DANUBE_ICU + 0x00E0))
+#define DANUBE_ICU_IM5_IMR ((volatile u32*)(DANUBE_ICU + 0x00E8))
+#define DANUBE_ICU_IM5_IMR_IID (1 << 31)
+#define DANUBE_ICU_IM5_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
+#define DANUBE_ICU_IM5_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
+#define DANUBE_ICU_IM5_IR(value) (1 << (value))
+
+/***Interrupt Vector Value Register***/
+//#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00f0))
+#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x00EC))
+
+/***Interrupt Vector Value Mask***/
+#define DANUBE_ICU_IM0_VEC_MASK 0x0000001f
+#define DANUBE_ICU_IM1_VEC_MASK 0x000003e0
+#define DANUBE_ICU_IM2_VEC_MASK 0x00007c00
+#define DANUBE_ICU_IM3_VEC_MASK 0x000f8000
+#define DANUBE_ICU_IM4_VEC_MASK 0x01f00000
+
+#define DANUBE_ICU_IM0_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM0_IER_IR(value) (1<<(value))
+#define DANUBE_ICU_IM1_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM1_IER_IR(value) (1<<(value))
+#define DANUBE_ICU_IM2_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM2_IER_IR(value) (1<<(value))
+#define DANUBE_ICU_IM3_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM3_IER_IR(value) (1<<(value))
+#define DANUBE_ICU_IM4_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM4_IER_IR(value) (1<<(value))
+#define DANUBE_ICU_IM5_ISR_IR(value) (1<<(value))
+#define DANUBE_ICU_IM5_IER_IR(value) (1<<(value))
+
+/***DMA Interrupt Mask Value***/
+#define DANUBE_DMA_H_MASK 0x00000fff
+
+/***External Interrupt Control Register***/
+#define DANUBE_ICU_EIU (KSEG1+0x1f101000)
+#define DANUBE_ICU_EIU_EXIN_C ((volatile u32*)(DANUBE_ICU_EIU+ 0x0000))
+#define DANUBE_ICU_EIU_INIC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0004))
+#define DANUBE_ICU_EIU_INC ((volatile u32*)(DANUBE_ICU_EIU+ 0x0008))
+#define DANUBE_ICU_EIU_INEN ((volatile u32*)(DANUBE_ICU_EIU+ 0x000c))
+
+/***********************************************************************/
+/* Module : MPS register address and bits */
+/***********************************************************************/
+
+#define DANUBE_MPS (KSEG1+0x1F107000)
+/***********************************************************************/
+
+#define DANUBE_MPS_CHIPID ((volatile u32*)(DANUBE_MPS + 0x0344))
+#define DANUBE_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
+#define DANUBE_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
+#define DANUBE_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
+#define DANUBE_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
+#define DANUBE_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
+#define DANUBE_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1)
+
+/* voice channel 0 ... 3 interrupt enable register */
+#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000))
+#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004))
+#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008))
+#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C))
+/* voice channel 0 ... 3 interrupt status read register */
+#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010))
+#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014))
+#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018))
+#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C))
+/* voice channel 0 ... 3 interrupt status set register */
+#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020))
+#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024))
+#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028))
+#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C))
+/* voice channel 0 ... 3 interrupt status clear register */
+#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030))
+#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034))
+#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038))
+#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C))
+/* common status 0 and 1 read register */
+#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040))
+#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044))
+/* common status 0 and 1 set register */
+#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048))
+#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C))
+/* common status 0 and 1 clear register */
+#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050))
+#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054))
+/* common status 0 and 1 enable register */
+#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058))
+#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C))
+/* notification enable register */
+#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060))
+#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064))
+/* CPU to CPU interrup request register */
+#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070))
+#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074))
+/* Global interrupt request and request enable register */
+#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078))
+#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C))
+
+#define DANUBE_MPS_SRAM ((volatile u32*)(KSEG1 + 0x1F200000))
+
+#define DANUBE_MPS_VCPU_FW_AD ((volatile u32*)(KSEG1 + 0x1F2001E0))
+
+#define DANUBE_FUSE_BASE_ADDR (KSEG1+0x1F107354)
+
+/************************************************************************/
+/* Module : DEU register address and bits */
+/************************************************************************/
+//#define DANUBE_DEU_BASE_ADDR (0xBE102000)
+#define DANUBE_DEU_BASE_ADDR (KSEG1 + 0x1E103100)
+/* DEU Control Register */
+#define DANUBE_DEU_CLK ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000))
+#define DANUBE_DEU_ID ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008))
+
+/* DEU control register */
+#define DANUBE_DES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010))
+#define DANUBE_DES_IHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014))
+#define DANUBE_DES_ILR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018))
+#define DANUBE_DES_K1HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C))
+#define DANUBE_DES_K1LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020))
+#define DANUBE_DES_K3HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024))
+#define DANUBE_DES_K3LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028))
+#define DANUBE_DES_IVHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C))
+#define DANUBE_DES_IVLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030))
+#define DANUBE_DES_OHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040))
+#define DANUBE_DES_OLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
+
+/* AES DEU register */
+#define DANUBE_AES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
+#define DANUBE_AES_ID3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054))
+#define DANUBE_AES_ID2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058))
+#define DANUBE_AES_ID1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C))
+#define DANUBE_AES_ID0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060))
+
+/* AES Key register */
+#define DANUBE_AES_K7R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064))
+#define DANUBE_AES_K6R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068))
+#define DANUBE_AES_K5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C))
+#define DANUBE_AES_K4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070))
+#define DANUBE_AES_K3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074))
+#define DANUBE_AES_K2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078))
+#define DANUBE_AES_K1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C))
+#define DANUBE_AES_K0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080))
+
+/* AES vector register */
+#define DANUBE_AES_IV3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084))
+#define DANUBE_AES_IV2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088))
+#define DANUBE_AES_IV1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C))
+#define DANUBE_AES_IV0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090))
+#define DANUBE_AES_0D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094))
+#define DANUBE_AES_0D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098))
+#define DANUBE_AES_OD1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C))
+#define DANUBE_AES_OD0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0))
+
+/* hash control registe */
+#define DANUBE_HASH_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0))
+#define DANUBE_HASH_MR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4))
+#define DANUBE_HASH_D1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 ))
+#define DANUBE_HASH_D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC ))
+#define DANUBE_HASH_D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 ))
+#define DANUBE_HASH_D4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4))
+#define DANUBE_HASH_D5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8))
+
+#define DANUBE_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC))
+
+#define DANUBE_DEU_IRNEN ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F4))
+#define DANUBE_DEU_IRNCR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00F8))
+#define DANUBE_DEU_IRNICR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00FC))
+
+/************************************************************************/
+/* Module : PPE register address and bits */
+/************************************************************************/
+#define DANUBE_PPE32_BASE 0xBE180000
+#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
+#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
+#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
+#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
+
+#define DANUBE_PPE32_SRST (DANUBE_PPE32_BASE + 0x10080)
+
+/*
+ * ETOP MDIO Registers
+ */
+#define DANUBE_PPE32_ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
+#define DANUBE_PPE32_ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
+#define DANUBE_PPE32_ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
+#define DANUBE_PPE32_ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
+#define DANUBE_PPE32_ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
+#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
+#define DANUBE_PPE32_ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
+#define DANUBE_PPE32_ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
+#define DANUBE_PPE32_ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
+
+/* ENET Register */
+#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+
+/* Sharebuff SB RAM2 control data */
+
+#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4)))
+#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4)))
+/************************************************************************/
+/* Module : PPE register address and bits */
+/************************************************************************/
+#define DANUBE_PPE32_BASE 0xBE180000
+#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
+#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
+#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
+#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
+#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
+
+/*
+ * ETOP MDIO Registers
+ */
+#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
+#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
+#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
+#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
+#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
+#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
+#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
+#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
+#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
+#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
+#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
+#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
+#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4)))
+#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4)))
+#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4)))
+#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4)))
+#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4)))
+#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4)))
+#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4)))
+#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4)))
+#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4)))
+
+#define ENETF_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4)))
+#define ENETF_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4)))
+#define ENETF_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4)))
+#define ENETF_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4)))
+#define ENETF_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4)))
+#define ENETF_HFCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4)))
+#define ENETF_TXCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4)))
+
+#define ENETF_VLCOS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4)))
+#define ENETF_VLCOS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4)))
+#define ENETF_VLCOS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4)))
+#define ENETF_VLCOS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4)))
+#define ENETF_EGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4)))
+#define ENETF_EGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4)))
+
+/* ENET Register */
+#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
+#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
+#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
+
+/* Sharebuff SB RAM2 control data */
+
+#define DANUBE_PPE32_SB2_DATABASE ((DANUBE_PPE32_BASE + (0x8C00 * 4)))
+#define DANUBE_PPE32_SB2_CTRLBASE ((DANUBE_PPE32_BASE + (0x92E0 * 4)))
+
+/***********************************************************************/
+/* Module : PCI register address and bits */
+/***********************************************************************/
+#define PCI_CR_PR_OFFSET (KSEG1+0x1E105400)
+#define PCI_CFG_BASE (KSEG1+0x17000000)
+#define PCI_MEM_BASE (KSEG1+0x18000000)
+#define PCI_CS_PR_OFFSET (KSEG1+0x17000000)
+
+/* PCI CONTROLLER REGISTER ADDRESS MAP */
+#define PCI_CR_CLK_CTRL_REG (PCI_CR_PR_OFFSET + 0x0000)
+#define PCI_CR_PCI_ID_REG (PCI_CR_PR_OFFSET + 0x0004)
+#define PCI_CR_SFT_RST_REG (PCI_CR_PR_OFFSET + 0x0010)
+#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014)
+#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018)
+#define PCI_CR_FPI_ERR_TAG_REG (PCI_CR_PR_OFFSET + 0x001C)
+#define PCI_CR_PCI_IRR_REG (PCI_CR_PR_OFFSET + 0x0020)
+#define PCI_CR_PCI_IRA_REG (PCI_CR_PR_OFFSET + 0x0024)
+#define PCI_CR_PCI_IRM_REG (PCI_CR_PR_OFFSET + 0x0028)
+#define PCI_CR_PCI_EOI_REG (PCI_CR_PR_OFFSET + 0x002C)
+#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030)
+#define PCI_CR_DV_ID_REG (PCI_CR_PR_OFFSET + 0x0034)
+#define PCI_CR_SUBSYS_ID_REG (PCI_CR_PR_OFFSET + 0x0038)
+#define PCI_CR_PCI_PM_REG (PCI_CR_PR_OFFSET + 0x003C)
+#define PCI_CR_CLASS_CODE1_REG (PCI_CR_PR_OFFSET + 0x0040)
+#define PCI_CR_BAR11MASK_REG (PCI_CR_PR_OFFSET + 0x0044)
+#define PCI_CR_BAR12MASK_REG (PCI_CR_PR_OFFSET + 0x0048)
+#define PCI_CR_BAR13MASK_REG (PCI_CR_PR_OFFSET + 0x004C)
+#define PCI_CR_BAR14MASK_REG (PCI_CR_PR_OFFSET + 0x0050)
+#define PCI_CR_BAR15MASK_REG (PCI_CR_PR_OFFSET + 0x0054)
+#define PCI_CR_BAR16MASK_REG (PCI_CR_PR_OFFSET + 0x0058)
+#define PCI_CR_CIS_PT1_REG (PCI_CR_PR_OFFSET + 0x005C)
+#define PCI_CR_SUBSYS_ID1_REG (PCI_CR_PR_OFFSET + 0x0060)
+#define PCI_CR_PCI_ADDR_MAP11_REG (PCI_CR_PR_OFFSET + 0x0064)
+#define PCI_CR_PCI_ADDR_MAP12_REG (PCI_CR_PR_OFFSET + 0x0068)
+#define PCI_CR_PCI_ADDR_MAP13_REG (PCI_CR_PR_OFFSET + 0x006C)
+#define PCI_CR_PCI_ADDR_MAP14_REG (PCI_CR_PR_OFFSET + 0x0070)
+#define PCI_CR_PCI_ADDR_MAP15_REG (PCI_CR_PR_OFFSET + 0x0074)
+#define PCI_CR_PCI_ADDR_MAP16_REG (PCI_CR_PR_OFFSET + 0x0078)
+#define PCI_CR_FPI_SEG_EN_REG (PCI_CR_PR_OFFSET + 0x007C)
+#define PCI_CR_PC_ARB_REG (PCI_CR_PR_OFFSET + 0x0080)
+#define PCI_CR_BAR21MASK_REG (PCI_CR_PR_OFFSET + 0x0084)
+#define PCI_CR_BAR22MASK_REG (PCI_CR_PR_OFFSET + 0x0088)
+#define PCI_CR_BAR23MASK_REG (PCI_CR_PR_OFFSET + 0x008C)
+#define PCI_CR_BAR24MASK_REG (PCI_CR_PR_OFFSET + 0x0090)
+#define PCI_CR_BAR25MASK_REG (PCI_CR_PR_OFFSET + 0x0094)
+#define PCI_CR_BAR26MASK_REG (PCI_CR_PR_OFFSET + 0x0098)
+#define PCI_CR_CIS_PT2_REG (PCI_CR_PR_OFFSET + 0x009C)
+#define PCI_CR_SUBSYS_ID2_REG (PCI_CR_PR_OFFSET + 0x00A0)
+#define PCI_CR_PCI_ADDR_MAP21_REG (PCI_CR_PR_OFFSET + 0x00A4)
+#define PCI_CR_PCI_ADDR_MAP22_REG (PCI_CR_PR_OFFSET + 0x00A8)
+#define PCI_CR_PCI_ADDR_MAP23_REG (PCI_CR_PR_OFFSET + 0x00AC)
+#define PCI_CR_PCI_ADDR_MAP24_REG (PCI_CR_PR_OFFSET + 0x00B0)
+#define PCI_CR_PCI_ADDR_MAP25_REG (PCI_CR_PR_OFFSET + 0x00B4)
+#define PCI_CR_PCI_ADDR_MAP26_REG (PCI_CR_PR_OFFSET + 0x00B8)
+#define PCI_CR_FPI_ADDR_MASK_REG (PCI_CR_PR_OFFSET + 0x00BC)
+#define PCI_CR_FCI_ADDR_MAP0_REG (PCI_CR_PR_OFFSET + 0x00C0)
+#define PCI_CR_FCI_ADDR_MAP1_REG (PCI_CR_PR_OFFSET + 0x00C4)
+#define PCI_CR_FCI_ADDR_MAP2_REG (PCI_CR_PR_OFFSET + 0x00C8)
+#define PCI_CR_FCI_ADDR_MAP3_REG (PCI_CR_PR_OFFSET + 0x00CC)
+#define PCI_CR_FCI_ADDR_MAP4_REG (PCI_CR_PR_OFFSET + 0x00D0)
+#define PCI_CR_FCI_ADDR_MAP5_REG (PCI_CR_PR_OFFSET + 0x00D4)
+#define PCI_CR_FCI_ADDR_MAP6_REG (PCI_CR_PR_OFFSET + 0x00D8)
+#define PCI_CR_FCI_ADDR_MAP7_REG (PCI_CR_PR_OFFSET + 0x00DC)
+#define PCI_CR_FCI_ADDR_MAP11lo_REG (PCI_CR_PR_OFFSET + 0x00E0)
+#define PCI_CR_FCI_ADDR_MAP11hg_REG (PCI_CR_PR_OFFSET + 0x00E4)
+#define PCI_CR_FCI_BURST_LENGTH_REG (PCI_CR_PR_OFFSET + 0x00E8)
+#define PCI_CR_PCI_SET_SERR_REG (PCI_CR_PR_OFFSET + 0x00EC)
+#define PCI_CR_DMA_FPI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F0)
+#define PCI_CR_DMA_PCI_ST_ADDR_REG (PCI_CR_PR_OFFSET + 0x00F4)
+#define PCI_CR_DMA_TRAN_CNT_REG (PCI_CR_PR_OFFSET + 0x00F8)
+#define PCI_CR_DMA_TRAN_CTL_REG (PCI_CR_PR_OFFSET + 0x00FC)
+
+/* PCI CONFIGURATION SPACE REGISTER Base Address */
+#define EXT_PCI1_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x0800
+#define EXT_PCI2_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1000
+#define EXT_PCI3_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x1800
+#define EXT_PCI4_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2000
+#define EXT_PCI5_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x2800
+#define EXT_PCI6_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3000
+#define EXT_PCI7_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x3800
+#define EXT_PCI8_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4000
+#define EXT_PCI9_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x4800
+#define EXT_PCI10_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5000
+#define EXT_PCI11_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x5800
+#define EXT_PCI12_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6000
+#define EXT_PCI13_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x6800
+#define EXT_PCI14_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7000
+#define EXT_PCI15_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0x7800
+#define EXT_CARDBUS_CONFIG_SPACE_BASE_ADDR PCI_CFG_BASE + 0XF000
+
+/* PCI CONFIGURATION SPACE REGISTER ADDRESS MAP */
+#define PCI_CS_DEV_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x0000)
+#define PCI_CS_STS_CMD_REG (PCI_CS_PR_OFFSET + 0x0004)
+#define PCI_CS_CL_CODE_REVIDG (PCI_CS_PR_OFFSET + 0x0008)
+#define PCI_CS_BST_HT_LT_CLS_REG (PCI_CS_PR_OFFSET + 0x000C)
+#define PCI_CS_BASE_ADDR1_REG (PCI_CS_PR_OFFSET + 0x0010)
+#define PCI_CS_BASE_ADDR2_REG (PCI_CS_PR_OFFSET + 0x0014)
+#define PCI_CS_BASE_ADDR3_REG (PCI_CS_PR_OFFSET + 0x0018)
+#define PCI_CS_BASE_ADDR4_REG (PCI_CS_PR_OFFSET + 0x001C)
+#define PCI_CS_BASE_ADDR5_REG (PCI_CS_PR_OFFSET + 0x0020)
+#define PCI_CS_BASE_ADDR6_REG (PCI_CS_PR_OFFSET + 0x0024)
+#define PCI_CS_CARDBUS_CIS_PT_REG (PCI_CS_PR_OFFSET + 0x0028)
+#define PCI_CS_SUBSYS_VEN_ID_REG (PCI_CS_PR_OFFSET + 0x002C)
+#define PCI_CS_EXROM_BAS_ADDR_REG (PCI_CS_PR_OFFSET + 0x0030)
+#define PCI_CS_RES1_REG (PCI_CS_PR_OFFSET + 0x0034)
+#define PCI_CS_RES2_REG (PCI_CS_PR_OFFSET + 0x0038)
+#define PCI_CS_LAT_GNT_INTR_REG (PCI_CS_PR_OFFSET + 0x003C)
+#define PCI_CS_PM_PT_CPID_REG (PCI_CS_PR_OFFSET + 0x0040)
+#define PCI_CS_DAT_PMCSR_PM_REG (PCI_CS_PR_OFFSET + 0x0044)
+#define PCI_CS_RES3_REG (PCI_CS_PR_OFFSET + 0x0048)
+#define PCI_CS_RES4_REG (PCI_CS_PR_OFFSET + 0x004C)
+#define PCI_CS_ERR_ADDR_PCI_FPI_REG (PCI_CS_PR_OFFSET + 0x0050)
+#define PCI_CS_ERR_ADDR_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0054)
+#define PCI_CS_ERR_TAG_FPI_PCI_REG (PCI_CS_PR_OFFSET + 0x0058)
+#define PCI_CS_PC_ARB_REG (PCI_CS_PR_OFFSET + 0x005C)
+#define PCI_CS_FPI_PCI_INT_STS_REG (PCI_CS_PR_OFFSET + 0x0060)
+#define PCI_CS_FPI_PCI_INT_ACK_REG (PCI_CS_PR_OFFSET + 0x0064)
+#define PCI_CS_FPI_PCI_INT_MASK_REG (PCI_CS_PR_OFFSET + 0x0068)
+#define PCI_CS_CARDBUS_CTL_STS_REG (PCI_CS_PR_OFFSET + 0x006C)
+
+// PCI CONTROLLER ADDRESS SPACE
+#define PCI_CA_PR_OFFSET 0xB8000000
+#define PCI_CA_PR_END 0xBBFFFFFF
+
+// PCI CONTROLLER REGISTER ADDRESS MASK
+#define PCI_CR_CLK_CTRL_MSK 0x82000000
+#define PCI_CR_PCI_ID_MSK 0x00000000
+#define PCI_CR_SFT_RST_MSK 0x00000002
+#define PCI_CR_PCI_FPI_ERR_ADDR_MSK 0x00000000
+#define PCI_CR_FCI_PCI_ERR_ADDR_MSK 0x00000000
+#define PCI_CR_FPI_ERR_TAG_MSK 0x00000000
+#define PCI_CR_PCI_IRR_MSK 0x07013B2F
+#define PCI_CR_PCI_IRA_MSK 0x07013B2F
+#define PCI_CR_PCI_IRM_MSK 0x07013B2F
+#define PCI_CR_PCI_EOI_MSK 0x07013B2F
+#define PCI_CR_PCI_MOD_MSK 0x1107070F
+#define PCI_CR_DV_ID_MSK 0x00000000
+#define PCI_CR_SUBSYS_ID_MSK 0x00000000
+#define PCI_CR_PCI_PM_MSK 0x0000001F
+#define PCI_CR_CLASS_CODE1_MSK 0x00000000
+#define PCI_CR_BAR11MASK_MSK 0x8FFFFFF8
+#define PCI_CR_BAR12MASK_MSK 0x80001F08
+#define PCI_CR_BAR13MASK_MSK 0x8FF00008
+#define PCI_CR_BAR14MASK_MSK 0x8FFFFF08
+#define PCI_CR_BAR15MASK_MSK 0x8FFFFF08
+#define PCI_CR_BAR16MASK_MSK 0x8FFFFFF9
+#define PCI_CR_CIS_PT1_MSK 0x03FFFFFF
+#define PCI_CR_SUBSYS_ID1_MSK 0x00000000
+#define PCI_CR_PCI_ADDR_MAP11_MSK 0x7FFF0001
+#define PCI_CR_PCI_ADDR_MAP12_MSK 0x7FFFFF01
+#define PCI_CR_PCI_ADDR_MAP13_MSK 0x7FF00001
+#define PCI_CR_PCI_ADDR_MAP14_MSK 0x7FFFFF01
+#define PCI_CR_PCI_ADDR_MAP15_MSK 0x7FF00001
+#define PCI_CR_PCI_ADDR_MAP16_MSK 0x7FF00001
+#define PCI_CR_FPI_SEG_EN_MSK 0x000003FF
+#define PCI_CR_CLASS_CODE2_MSK 0x00000000
+#define PCI_CR_BAR21MASK_MSK 0x800F0008
+#define PCI_CR_BAR22MASK_MSK 0x807F0008
+#define PCI_CR_BAR23MASK_MSK 0x8FF00008
+#define PCI_CR_BAR24MASK_MSK 0x8FFFFF08
+#define PCI_CR_BAR25MASK_MSK 0x8FFFFF08
+#define PCI_CR_BAR26MASK_MSK 0x8FFFFFF9
+#define PCI_CR_CIS_PT2_MSK 0x03FFFFFF
+#define PCI_CR_SUBSYS_ID2_MSK 0x00000000
+#define PCI_CR_PCI_ADDR_MAP21_MSK 0x7FFE0001
+#define PCI_CR_PCI_ADDR_MAP22_MSK 0x7FFF0001
+#define PCI_CR_PCI_ADDR_MAP23_MSK 0x7FF00001
+#define PCI_CR_PCI_ADDR_MAP24_MSK 0x7FFFFF01
+#define PCI_CR_PCI_ADDR_MAP25_MSK 0x7FFFFF01
+#define PCI_CR_PCI_ADDR_MAP26_MSK 0x7FF00001
+#define PCI_CR_FPI_ADDR_MASK_MSK 0x00070000
+#define PCI_CR_FCI_ADDR_MAP0_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP1_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP2_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP3_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP4_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP5_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP6_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP7_MSK 0xFFF00000
+#define PCI_CR_FCI_ADDR_MAP11lo_MSK 0xFFFF0000
+#define PCI_CR_FCI_ADDR_MAP11hg_MSK 0xFFF00000
+#define PCI_CR_FCI_BURST_LENGTH_MSK 0x00000303
+#define PCI_CR_PCI_SET_SERR_MSK 0x00000001
+#define PCI_CR_DMA_FPI_ST_ADDR_MSK 0xFFFFFFFF
+#define PCI_CR_DMA_PCI_ST_ADDR_MSK 0xFFFFFFFF
+#define PCI_CR_DMA_TRAN_CNT_MSK 0x000003FF
+#define PCI_CR_DMA_TRAN_CTL_MSK 0x00000003
+
+#define INTERNAL_ARB_ENABLE_BIT 0
+#define ARB_SCHEME_BIT 1
+#define PCI_MASTER0_PRIOR_2BITS 2
+#define PCI_MASTER1_PRIOR_2BITS 4
+#define PCI_MASTER2_PRIOR_2BITS 6
+#define PCI_MASTER0_REQ_MASK_2BITS 8
+#define PCI_MASTER1_REQ_MASK_2BITS 10
+#define PCI_MASTER2_REQ_MASK_2BITS 12
+
+#define IOPORT_RESOURCE_START 0x10000000
+#define IOPORT_RESOURCE_END 0xffffffff
+#define IOMEM_RESOURCE_START 0x10000000
+#define IOMEM_RESOURCE_END 0xffffffff
+
+/***********************************************************************/
+#define DANUBE_REG32(addr) *((volatile u32 *)(addr))
+/***********************************************************************/
+#endif //DANUBE_H
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+#ifndef _DANUBE_PMU_H__
+#define _DANUBE_PMU_H__
+
+#define DANUBE_PMU_PWDCR_DMA 0x20
+#define DANUBE_PMU_PWDCR_LED 0x800
+#define DANUBE_PMU_PWDCR_GPT 0x1000
+#define DANUBE_PMU_PWDCR_PPE 0x2000
+#define DANUBE_PMU_PWDCR_FPI 0x4000
+
+void danube_pmu_enable (unsigned int module);
+void danube_pmu_disable (unsigned int module);
+
+#endif
--- /dev/null
+/* incaAscSio.h - (DANUBE) ASC UART tty driver header */
+
+#ifndef __DANUBE_ASC_H
+#define __DANUBE_ASC_H
+
+/******************************************************************************
+**
+** FILE NAME : serial.c
+** PROJECT : Danube
+** MODULES : ASC/UART
+**
+** DATE : 27 MAR 2006
+** AUTHOR : Liu Peng
+** DESCRIPTION : Asynchronous Serial Channel (ASC/UART) Driver Header File
+** COPYRIGHT : Copyright (c) 2006
+** Infineon Technologies AG
+** Am Campeon 1-12, 85579 Neubiberg, Germany
+**
+** This program is free software; you can redistribute it and/or modify
+** it under the terms of the GNU General Public License as published by
+** the Free Software Foundation; either version 2 of the License, or
+** (at your option) any later version.
+**
+** HISTORY
+** $Date $Author $Comment
+** 27 MAR 2006 Liu Peng Initiate Version (rev 1.7)
+** 23 OCT 2006 Xu Liang Add GPL header.
+*******************************************************************************/
+
+/* channel operating modes */
+/*#define ASCOPT_CSIZE 0x00000003
+#define ASCOPT_CS7 0x00000001
+#define ASCOPT_CS8 0x00000002
+#define ASCOPT_PARENB 0x00000004
+#define ASCOPT_STOPB 0x00000008
+#define ASCOPT_PARODD 0x00000010
+#define ASCOPT_CREAD 0x00000020
+*/
+#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
+
+/* ASC input select (0 or 1) */
+#define CONSOLE_TTY 0
+
+#define DANUBEASC_TXFIFO_FL 1
+#define DANUBEASC_RXFIFO_FL 1
+#define DANUBEASC_TXFIFO_FULL 16
+
+/* interrupt lines masks for the ASC device interrupts*/
+/* change these macroses if it's necessary */
+#define DANUBEASC_IRQ_LINE_ALL 0x0000007f /* all IRQs */
+
+#define DANUBEASC_IRQ_LINE_TIR 0x00000001 /* Tx Int */
+#define DANUBEASC_IRQ_LINE_TBIR 0x00000002 /* Tx Buffer Int */
+#define DANUBEASC_IRQ_LINE_RIR 0x00000004 /* Rx Int */
+#define DANUBEASC_IRQ_LINE_EIR 0x00000008 /* Error Int */
+#define DANUBEASC_IRQ_LINE_ABSTIR 0x00000010 /* Autobaud Start Int */
+#define DANUBEASC_IRQ_LINE_ABDETIP 0x00000020 /* Autobaud Detection Int */
+#define DANUBEASC_IRQ_LINE_SFCIR 0x00000040 /* Software Flow Control Int */
+
+/* interrupt controller access macros */
+#define ASC_INTERRUPTS_ENABLE(X) \
+*((volatile unsigned int*) DANUBE_ICU_IM0_IER) |= X;
+#define ASC_INTERRUPTS_DISABLE(X) \
+*((volatile unsigned int*) DANUBE_ICU_IM0_IER) &= ~X;
+#define ASC_INTERRUPTS_CLEAR(X) \
+*((volatile unsigned int*) DANUBE_ICU_IM0_ISR) = X;
+
+/* CLC register's bits and bitfields */
+#define ASCCLC_DISR 0x00000001
+#define ASCCLC_DISS 0x00000002
+#define ASCCLC_RMCMASK 0x0000FF00
+#define ASCCLC_RMCOFFSET 8
+
+/* CON register's bits and bitfields */
+#define ASCCON_MODEMASK 0x0000000f
+#define ASCCON_M_8ASYNC 0x0
+#define ASCCON_M_8IRDA 0x1
+#define ASCCON_M_7ASYNC 0x2
+#define ASCCON_M_7IRDA 0x3
+#define ASCCON_WLSMASK 0x0000000c
+#define ASCCON_WLSOFFSET 2
+#define ASCCON_WLS_8BIT 0x0
+#define ASCCON_WLS_7BIT 0x1
+#define ASCCON_PEN 0x00000010
+#define ASCCON_ODD 0x00000020
+#define ASCCON_SP 0x00000040
+#define ASCCON_STP 0x00000080
+#define ASCCON_BRS 0x00000100
+#define ASCCON_FDE 0x00000200
+#define ASCCON_ERRCLK 0x00000400
+#define ASCCON_EMMASK 0x00001800
+#define ASCCON_EMOFFSET 11
+#define ASCCON_EM_ECHO_OFF 0x0
+#define ASCCON_EM_ECHO_AB 0x1
+#define ASCCON_EM_ECHO_ON 0x2
+#define ASCCON_LB 0x00002000
+#define ASCCON_ACO 0x00004000
+#define ASCCON_R 0x00008000
+#define ASCCON_PAL 0x00010000
+#define ASCCON_FEN 0x00020000
+#define ASCCON_RUEN 0x00040000
+#define ASCCON_ROEN 0x00080000
+#define ASCCON_TOEN 0x00100000
+#define ASCCON_BEN 0x00200000
+#define ASCCON_TXINV 0x01000000
+#define ASCCON_RXINV 0x02000000
+#define ASCCON_TXMSB 0x04000000
+#define ASCCON_RXMSB 0x08000000
+
+/* STATE register's bits and bitfields */
+#define ASCSTATE_REN 0x00000001
+#define ASCSTATE_PE 0x00010000
+#define ASCSTATE_FE 0x00020000
+#define ASCSTATE_RUE 0x00040000
+#define ASCSTATE_ROE 0x00080000
+#define ASCSTATE_TOE 0x00100000
+#define ASCSTATE_BE 0x00200000
+#define ASCSTATE_TXBVMASK 0x07000000
+#define ASCSTATE_TXBVOFFSET 24
+#define ASCSTATE_TXEOM 0x08000000
+#define ASCSTATE_RXBVMASK 0x70000000
+#define ASCSTATE_RXBVOFFSET 28
+#define ASCSTATE_RXEOM 0x80000000
+#define ASCSTATE_ANY (ASCSTATE_ROE|ASCSTATE_PE|ASCSTATE_FE)
+
+/* WHBSTATE register's bits and bitfields */
+#define ASCWHBSTATE_CLRREN 0x00000001
+#define ASCWHBSTATE_SETREN 0x00000002
+#define ASCWHBSTATE_CLRPE 0x00000004
+#define ASCWHBSTATE_CLRFE 0x00000008
+#define ASCWHBSTATE_CLRRUE 0x00000010
+#define ASCWHBSTATE_CLRROE 0x00000020
+#define ASCWHBSTATE_CLRTOE 0x00000040
+#define ASCWHBSTATE_CLRBE 0x00000080
+#define ASCWHBSTATE_SETPE 0x00000100
+#define ASCWHBSTATE_SETFE 0x00000200
+#define ASCWHBSTATE_SETRUE 0x00000400
+#define ASCWHBSTATE_SETROE 0x00000800
+#define ASCWHBSTATE_SETTOE 0x00001000
+#define ASCWHBSTATE_SETBE 0x00002000
+
+/* ABCON register's bits and bitfields */
+#define ASCABCON_ABEN 0x0001
+#define ASCABCON_AUREN 0x0002
+#define ASCABCON_ABSTEN 0x0004
+#define ASCABCON_ABDETEN 0x0008
+#define ASCABCON_FCDETEN 0x0010
+
+/* FDV register mask, offset and bitfields*/
+#define ASCFDV_VALUE_MASK 0x000001FF
+
+/* WHBABCON register's bits and bitfields */
+#define ASCWHBABCON_CLRABEN 0x0001
+#define ASCWHBABCON_SETABEN 0x0002
+
+/* ABSTAT register's bits and bitfields */
+#define ASCABSTAT_FCSDET 0x0001
+#define ASCABSTAT_FCCDET 0x0002
+#define ASCABSTAT_SCSDET 0x0004
+#define ASCABSTAT_SCCDET 0x0008
+#define ASCABSTAT_DETWAIT 0x0010
+
+/* WHBABSTAT register's bits and bitfields */
+#define ASCWHBABSTAT_CLRFCSDET 0x0001
+#define ASCWHBABSTAT_SETFCSDET 0x0002
+#define ASCWHBABSTAT_CLRFCCDET 0x0004
+#define ASCWHBABSTAT_SETFCCDET 0x0008
+#define ASCWHBABSTAT_CLRSCSDET 0x0010
+#define ASCWHBABSTAT_SETSCSDET 0x0020
+#define ASCWHBABSTAT_CLRSCCDET 0x0040
+#define ASCWHBABSTAT_SETSCCDET 0x0080
+#define ASCWHBABSTAT_CLRDETWAIT 0x0100
+#define ASCWHBABSTAT_SETDETWAIT 0x0200
+
+/* TXFCON register's bits and bitfields */
+#define ASCTXFCON_TXFIFO1 0x00000400
+#define ASCTXFCON_TXFEN 0x0001
+#define ASCTXFCON_TXFFLU 0x0002
+#define ASCTXFCON_TXFITLMASK 0x3F00
+#define ASCTXFCON_TXFITLOFF 8
+
+/* RXFCON register's bits and bitfields */
+#define ASCRXFCON_RXFIFO1 0x00000400
+#define ASCRXFCON_RXFEN 0x0001
+#define ASCRXFCON_RXFFLU 0x0002
+#define ASCRXFCON_RXFITLMASK 0x3F00
+#define ASCRXFCON_RXFITLOFF 8
+
+/* FSTAT register's bits and bitfields */
+#define ASCFSTAT_RXFFLMASK 0x003F
+#define ASCFSTAT_TXFFLMASK 0x3F00
+#define ASCFSTAT_TXFFLOFF 8
+
+#endif /* __DANUBE_ASC_H */
--- /dev/null
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA.
+ *
+ * Copyright (C) 2005 infineon
+ * Copyright (C) 2007 John Crispin <blogic@openwrt.org>
+ *
+ */
+
+#ifndef DANUBE_WDT_H
+#define DANUBE_WDT_H
+
+/* Danube wdt ioctl control */
+#define DANUBE_WDT_IOC_MAGIC 0xc0
+#define DANUBE_WDT_IOC_START _IOW(DANUBE_WDT_IOC_MAGIC, 0, int)
+#define DANUBE_WDT_IOC_STOP _IO(DANUBE_WDT_IOC_MAGIC, 1)
+#define DANUBE_WDT_IOC_PING _IO(DANUBE_WDT_IOC_MAGIC, 2)
+#define DANUBE_WDT_IOC_SET_PWL _IOW(DANUBE_WDT_IOC_MAGIC, 3, int)
+#define DANUBE_WDT_IOC_SET_DSEN _IOW(DANUBE_WDT_IOC_MAGIC, 4, int)
+#define DANUBE_WDT_IOC_SET_LPEN _IOW(DANUBE_WDT_IOC_MAGIC, 5, int)
+#define DANUBE_WDT_IOC_GET_STATUS _IOR(DANUBE_WDT_IOC_MAGIC, 6, int)
+#define DANUBE_WDT_IOC_SET_CLKDIV _IOW(DANUBE_WDT_IOC_MAGIC, 7, int)
+
+/* password 1 and 2 */
+#define DANUBE_WDT_PW1 0x000000BE
+#define DANUBE_WDT_PW2 0x000000DC
+
+#define DANUBE_WDT_CLKDIV0_VAL 1
+#define DANUBE_WDT_CLKDIV1_VAL 64
+#define DANUBE_WDT_CLKDIV2_VAL 4096
+#define DANUBE_WDT_CLKDIV3_VAL 262144
+#define DANUBE_WDT_CLKDIV0 0
+#define DANUBE_WDT_CLKDIV1 1
+#define DANUBE_WDT_CLKDIV2 2
+#define DANUBE_WDT_CLKDIV3 3
+
+#endif
--- /dev/null
+//*************************************************************************
+//* Summary of definitions which are used in each peripheral *
+//*************************************************************************
+
+#ifndef peripheral_definitions_h
+#define peripheral_definitions_h
+
+////#include "cpu.h"
+//
+///* These files have to be included by each peripheral */
+//#include <sysdefs.h>
+//#include <excep.h>
+//#include <cpusubsys.h>
+//#include <sys_api.h>
+//#include <mips.h>
+//#include "SRAM_address_map.h"
+//
+///* common header files for all CPU's */
+//#include "iiu.h"
+//#include "bcu.h"
+//#include "FPI_address_map.h"
+//#include "direct_interrupts.h"
+
+/////////////////////////////////////////////////////////////////////////
+
+//extern int _clz();
+//extern void _nop();
+//extern void _sleep();
+//extern void sys_enable_int();
+
+typedef unsigned char UINT8;
+typedef signed char INT8;
+typedef unsigned short UINT16;
+typedef signed short INT16;
+typedef unsigned int UINT32;
+typedef signed int INT32;
+typedef unsigned long long UINT64;
+typedef signed long long INT64;
+
+#define REG8( addr ) (*(volatile UINT8 *) (addr))
+#define REG16( addr ) (*(volatile UINT16 *)(addr))
+#define REG32( addr ) (*(volatile UINT32 *)(addr))
+#define REG64( addr ) (*(volatile UINT64 *)(addr))
+
+/* define routine to set FPI access in Supervisor Mode */
+#define IFX_SUPERVISOR_ON() REG32(FB0_CFG) = 0x01
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_OFF() REG32(FB0_CFG) = 0x00
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_MODE() REG32(FB0_CFG)
+/* Supervisor mode ends, following functions will be done in User mode */
+#define IFX_SUPERVISOR_SET(svm) REG32(FB0_CFG) = svm
+/* enable all Interrupts in IIU */
+//#define IFX_ENABLE_IRQ(irq_mask, im_base) REG32(im_base | IIU_MASK) = irq_mask
+///* get all high priority interrupt bits in IIU */
+//#define IFX_GET_IRQ_MASKED(im_base) REG32(im_base | IIU_IRMASKED)
+///* signal ends of interrupt to IIU */
+//#define IFX_CLEAR_DIRECT_IRQ(irq_bit, im_base) REG32(im_base | IIU_IR) = irq_bit
+///* force IIU interrupt register */
+//#define IFX_FORCE_IIU_REGISTER(data, im_base) REG32(im_base | IIU_IRDEBUG) = data
+///* get all bits of interrupt register */
+//#define IFX_GET_IRQ_UNMASKED(im_base) REG32(im_base | IIU_IR)
+/* insert a NOP instruction */
+#define NOP _nop()
+/* CPU goes to power down mode until interrupt occurs */
+#define IFX_CPU_SLEEP _sleep()
+/* enable all interrupts to CPU */
+#define IFX_CPU_ENABLE_ALL_INTERRUPT sys_enable_int()
+/* get all low priority interrupt bits in peripheral */
+#define IFX_GET_LOW_PRIO_IRQ(int_reg) REG32(int_reg)
+/* clear low priority interrupt bit in peripheral */
+#define IFX_CLEAR_LOW_PRIO_IRQ(irq_bit, int_reg) REG32(int_reg) = irq_bit
+/* write FPI bus */
+#define WRITE_FPI_BYTE(data, addr) REG8(addr) = data
+#define WRITE_FPI_16BIT(data, addr) REG16(addr) = data
+#define WRITE_FPI_32BIT(data, addr) REG32(addr) = data
+/* read FPI bus */
+#define READ_FPI_BYTE(addr) REG8(addr)
+#define READ_FPI_16BIT(addr) REG16(addr)
+#define READ_FPI_32BIT(addr) REG32(addr)
+/* write peripheral register */
+#define WRITE_PERIPHERAL_REGISTER(data, addr) REG32(addr) = data
+
+#ifdef CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr) = data
+#else //not CONFIG_CPU_LITTLE_ENDIAN
+#define WRITE_PERIPHERAL_REGISTER_16(data, addr) REG16(addr+2) = data
+#define WRITE_PERIPHERAL_REGISTER_8(data, addr) REG8(addr+3) = data
+#endif //CONFIG_CPU_LITTLE_ENDIAN
+
+/* read peripheral register */
+#define READ_PERIPHERAL_REGISTER(addr) REG32(addr)
+
+/* read/modify(or)/write peripheral register */
+#define RMW_OR_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) | data
+/* read/modify(and)/write peripheral register */
+#define RMW_AND_PERIPHERAL_REGISTER(data, addr) REG32(addr) = REG32(addr) & (UINT32)data
+
+/* CPU-independent mnemonic constants */
+/* CLC register bits */
+#define IFX_CLC_ENABLE 0x00000000
+#define IFX_CLC_DISABLE 0x00000001
+#define IFX_CLC_DISABLE_STATUS 0x00000002
+#define IFX_CLC_SUSPEND_ENABLE 0x00000004
+#define IFX_CLC_CLOCK_OFF_DISABLE 0x00000008
+#define IFX_CLC_OVERWRITE_SPEN_FSOE 0x00000010
+#define IFX_CLC_FAST_CLOCK_SWITCH_OFF 0x00000020
+#define IFX_CLC_RUN_DIVIDER_MASK 0x0000FF00
+#define IFX_CLC_RUN_DIVIDER_OFFSET 8
+#define IFX_CLC_SLEEP_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SLEEP_DIVIDER_OFFSET 16
+#define IFX_CLC_SPECIFIC_DIVIDER_MASK 0x00FF0000
+#define IFX_CLC_SPECIFIC_DIVIDER_OFFSET 24
+
+/* number of cycles to wait for interrupt service routine to be called */
+#define WAIT_CYCLES 50
+
+#endif /* PERIPHERAL_DEFINITIONS_H not yet defined */
--- /dev/null
+/*
+ * ifx_ssc.h defines some data sructures used in ifx_ssc.c
+ *
+ * Copyright (C) 2004 Michael Schoenenborn (IFX COM TI BT)
+ *
+ *
+ */
+
+#ifndef __IFX_SSC_H
+#define __IFX_SSC_H
+#ifdef __KERNEL__
+#include <asm/danube/ifx_ssc_defines.h>
+#endif //__KERNEL__
+
+#define PORT_CNT 1 // assume default value
+
+/* symbolic constants to be used in SSC routines */
+
+// ### TO DO: bad performance
+#define IFX_SSC_TXFIFO_ITL 1
+#define IFX_SSC_RXFIFO_ITL 1
+
+struct ifx_ssc_statistics {
+ unsigned int abortErr; /* abort error */
+ unsigned int modeErr; /* master/slave mode error */
+ unsigned int txOvErr; /* TX Overflow error */
+ unsigned int txUnErr; /* TX Underrun error */
+ unsigned int rxOvErr; /* RX Overflow error */
+ unsigned int rxUnErr; /* RX Underrun error */
+ unsigned int rxBytes;
+ unsigned int txBytes;
+};
+
+struct ifx_ssc_hwopts {
+ unsigned int AbortErrDetect:1; /* Abort Error detection (in slave mode) */
+ unsigned int rxOvErrDetect:1; /* Receive Overflow Error detection */
+ unsigned int rxUndErrDetect:1; /* Receive Underflow Error detection */
+ unsigned int txOvErrDetect:1; /* Transmit Overflow Error detection */
+ unsigned int txUndErrDetect:1; /* Transmit Underflow Error detection */
+ unsigned int echoMode:1; /* Echo mode */
+ unsigned int loopBack:1; /* Loopback mode */
+ unsigned int idleValue:1; /* Idle value */
+ unsigned int clockPolarity:1; /* Idle clock is high or low */
+ unsigned int clockPhase:1; /* Tx on trailing or leading edge */
+ unsigned int headingControl:1; /* LSB first or MSB first */
+ unsigned int dataWidth:6; /* from 2 up to 32 bits */
+ unsigned int masterSelect:1; /* Master or Slave mode */
+ unsigned int modeRxTx:2; /* rx/tx mode */
+ unsigned int gpoCs:8; /* choose outputs to use for chip select */
+ unsigned int gpoInv:8; /* invert GPO outputs */
+};
+
+struct ifx_ssc_frm_opts {
+ bool FrameEnable; // SFCON.SFEN
+ unsigned int DataLength; // SFCON.DLEN
+ unsigned int PauseLength; // SFCON.PLEN
+ unsigned int IdleData; // SFCON.IDAT
+ unsigned int IdleClock; // SFCON.ICLK
+ bool StopAfterPause; // SFCON.STOP
+};
+
+struct ifx_ssc_frm_status {
+ bool DataBusy; // SFSTAT.DBSY
+ bool PauseBusy; // SFSTAT.PBSY
+ unsigned int DataCount; // SFSTAT.DCNT
+ unsigned int PauseCount; // SFSTAT.PCNT
+ bool EnIntAfterData; // SFCON.IBEN
+ bool EnIntAfterPause; // SFCON.IAEN
+};
+
+typedef struct {
+ char *buf;
+ size_t len;
+} ifx_ssc_buf_item_t;
+
+// data structures for batch execution
+typedef union {
+ struct {
+ bool save_options;
+ } init;
+ ifx_ssc_buf_item_t read;
+ ifx_ssc_buf_item_t write;
+ ifx_ssc_buf_item_t rd_wr;
+ unsigned int set_baudrate;
+ struct ifx_ssc_frm_opts set_frm;
+ unsigned int set_gpo;
+ struct ifx_ssc_hwopts set_hwopts;
+} ifx_ssc_batch_cmd_param;
+
+struct ifx_ssc_batch_list {
+ unsigned int cmd;
+ ifx_ssc_batch_cmd_param cmd_param;
+ struct ifx_ssc_batch_list *next;
+};
+
+#ifdef __KERNEL__
+#define IFX_SSC_IS_MASTER(p) ((p)->opts.masterSelect == SSC_MASTER_MODE)
+
+struct ifx_ssc_port {
+ unsigned long mapbase;
+ struct ifx_ssc_hwopts opts;
+ struct ifx_ssc_statistics stats;
+ struct ifx_ssc_frm_status frm_status;
+ struct ifx_ssc_frm_opts frm_opts;
+ /* wait queue for ifx_ssc_read() */
+ wait_queue_head_t rwait, pwait;
+ int port_nr;
+ char port_is_open; /* exclusive open - boolean */
+// int no_of_bits; /* number of _valid_ bits */
+// int elem_size; /* shift for element (no of bytes)*/
+ /* buffer and pointers to the read/write position */
+ char *rxbuf; /* buffer for RX */
+ char *rxbuf_end; /* buffer end pointer for RX */
+ volatile char *rxbuf_ptr; /* buffer write pointer for RX */
+ char *txbuf; /* buffer for TX */
+ char *txbuf_end; /* buffer end pointer for TX */
+ volatile char *txbuf_ptr; /* buffer read pointer for TX */
+ unsigned int baud;
+ /* each channel has its own interrupts */
+ /* (transmit/receive/error/frame) */
+ unsigned int txirq, rxirq, errirq, frmirq;
+};
+/* default values for SSC configuration */
+// values of CON
+#define IFX_SSC_DEF_IDLE_DATA 1 /* enable */
+#define IFX_SSC_DEF_BYTE_VALID_CTL 1 /* enable */
+#define IFX_SSC_DEF_DATA_WIDTH 32 /* bits */
+#define IFX_SSC_DEF_ABRT_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_RO_ERR_DETECT 1 /* enable */
+#define IFX_SSC_DEF_RU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TO_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_TU_ERR_DETECT 0 /* disable */
+#define IFX_SSC_DEF_LOOP_BACK 0 /* disable */
+#define IFX_SSC_DEF_ECHO_MODE 0 /* disable */
+#define IFX_SSC_DEF_CLOCK_POLARITY 0 /* low */
+#define IFX_SSC_DEF_CLOCK_PHASE 1 /* 0: shift on leading edge, latch on trailling edge, 1, otherwise */
+#define IFX_SSC_DEF_HEADING_CONTROL IFX_SSC_MSB_FIRST
+#define IFX_SSC_DEF_MODE_RXTX IFX_SSC_MODE_RXTX
+// other values
+#define IFX_SSC_DEF_MASTERSLAVE IFX_SSC_MASTER_MODE /* master */
+#ifdef CONFIG_USE_EMULATOR
+#define IFX_SSC_DEF_BAUDRATE 10000
+#else
+#define IFX_SSC_DEF_BAUDRATE 2000000
+#endif
+#define IFX_SSC_DEF_RMC 0x10
+
+#define IFX_SSC_DEF_TXFIFO_FL 8
+#define IFX_SSC_DEF_RXFIFO_FL 1
+
+#if 1 //TODO
+#define IFX_SSC_DEF_GPO_CS 0x3 /* no chip select */
+#define IFX_SSC_DEF_GPO_INV 0 /* no chip select */
+#else
+#error "what is ur Chip Select???"
+#endif
+#define IFX_SSC_DEF_SFCON 0 /* no serial framing */
+#if 0
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT | IFX_SSC_F_BIT
+#endif
+#define IFX_SSC_DEF_IRNEN IFX_SSC_T_BIT | /* enable all int's */\
+ IFX_SSC_R_BIT | IFX_SSC_E_BIT
+#endif /* __KERNEL__ */
+
+// batch execution commands
+#define IFX_SSC_BATCH_CMD_INIT 1
+#define IFX_SSC_BATCH_CMD_READ 2
+#define IFX_SSC_BATCH_CMD_WRITE 3
+#define IFX_SSC_BATCH_CMD_RD_WR 4
+#define IFX_SSC_BATCH_CMD_SET_BAUDRATE 5
+#define IFX_SSC_BATCH_CMD_SET_HWOPTS 6
+#define IFX_SSC_BATCH_CMD_SET_FRM 7
+#define IFX_SSC_BATCH_CMD_SET_GPO 8
+#define IFX_SSC_BATCH_CMD_FIFO_FLUSH 9
+//#define IFX_SSC_BATCH_CMD_
+//#define IFX_SSC_BATCH_CMD_
+#define IFX_SSC_BATCH_CMD_END_EXEC 0
+
+/* Macros to configure SSC hardware */
+/* headingControl: */
+#define IFX_SSC_LSB_FIRST 0
+#define IFX_SSC_MSB_FIRST 1
+/* dataWidth: */
+#define IFX_SSC_MIN_DATA_WIDTH 2
+#define IFX_SSC_MAX_DATA_WIDTH 32
+/* master/slave mode select */
+#define IFX_SSC_MASTER_MODE 1
+#define IFX_SSC_SLAVE_MODE 0
+/* rx/tx mode */
+// ### TO DO: !!! ATTENTION! Hardware dependency => move to ifx_ssc_defines.h
+#define IFX_SSC_MODE_RXTX 0
+#define IFX_SSC_MODE_RX 1
+#define IFX_SSC_MODE_TX 2
+#define IFX_SSC_MODE_OFF 3
+#define IFX_SSC_MODE_MASK IFX_SSC_MODE_RX | IFX_SSC_MODE_TX
+
+/* GPO values */
+#define IFX_SSC_MAX_GPO_OUT 7
+
+#define IFX_SSC_RXREQ_BLOCK_SIZE 32768
+
+/***********************/
+/* defines for ioctl's */
+/***********************/
+#define IFX_SSC_IOCTL_MAGIC 'S'
+/* read out the statistics */
+#define IFX_SSC_STATS_READ _IOR(IFX_SSC_IOCTL_MAGIC, 1, struct ifx_ssc_statistics)
+/* clear the statistics */
+#define IFX_SSC_STATS_RESET _IO(IFX_SSC_IOCTL_MAGIC, 2)
+/* set the baudrate */
+#define IFX_SSC_BAUD_SET _IOW(IFX_SSC_IOCTL_MAGIC, 3, unsigned int)
+/* get the current baudrate */
+#define IFX_SSC_BAUD_GET _IOR(IFX_SSC_IOCTL_MAGIC, 4, unsigned int)
+/* set hardware options */
+#define IFX_SSC_HWOPTS_SET _IOW(IFX_SSC_IOCTL_MAGIC, 5, struct ifx_ssc_hwopts)
+/* get the current hardware options */
+#define IFX_SSC_HWOPTS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 6, struct ifx_ssc_hwopts)
+/* set transmission mode */
+#define IFX_SSC_RXTX_MODE_SET _IOW(IFX_SSC_IOCTL_MAGIC, 7, unsigned int)
+/* get the current transmission mode */
+#define IFX_SSC_RXTX_MODE_GET _IOR(IFX_SSC_IOCTL_MAGIC, 8, unsigned int)
+/* abort transmission */
+#define IFX_SSC_ABORT _IO(IFX_SSC_IOCTL_MAGIC, 9)
+#define IFX_SSC_FIFO_FLUSH _IO(IFX_SSC_IOCTL_MAGIC, 9)
+
+/* set general purpose outputs */
+#define IFX_SSC_GPO_OUT_SET _IOW(IFX_SSC_IOCTL_MAGIC, 32, unsigned int)
+/* clear general purpose outputs */
+#define IFX_SSC_GPO_OUT_CLR _IOW(IFX_SSC_IOCTL_MAGIC, 33, unsigned int)
+/* get general purpose outputs */
+#define IFX_SSC_GPO_OUT_GET _IOR(IFX_SSC_IOCTL_MAGIC, 34, unsigned int)
+
+/*** serial framing ***/
+/* get status of serial framing */
+#define IFX_SSC_FRM_STATUS_GET _IOR(IFX_SSC_IOCTL_MAGIC, 48, struct ifx_ssc_frm_status)
+/* get counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_GET _IOR(IFX_SSC_IOCTL_MAGIC, 49, struct ifx_ssc_frm_opts)
+/* set counter reload values and control bits */
+#define IFX_SSC_FRM_CONTROL_SET _IOW(IFX_SSC_IOCTL_MAGIC, 50, struct ifx_ssc_frm_opts)
+
+/*** batch execution ***/
+/* do batch execution */
+#define IFX_SSC_BATCH_EXEC _IOW(IFX_SSC_IOCTL_MAGIC, 64, struct ifx_ssc_batch_list)
+
+#ifdef __KERNEL__
+// routines from ifx_ssc.c
+// ### TO DO
+/* kernel interface for read and write */
+ssize_t ifx_ssc_kread (int, char *, size_t);
+ssize_t ifx_ssc_kwrite (int, const char *, size_t);
+
+#ifdef CONFIG_IFX_VP_KERNEL_TEST
+void ifx_ssc_tc (void);
+#endif // CONFIG_IFX_VP_KERNEL_TEST
+
+#endif //__KERNEL__
+#endif // __IFX_SSC_H
--- /dev/null
+#ifndef IFX_SSC_DEFINES_H
+#define IFX_SSC_DEFINES_H
+
+#include "ifx_peripheral_definitions.h"
+
+/* maximum SSC FIFO size */
+#define IFX_SSC_MAX_FIFO_SIZE 32
+
+/* register map of SSC */
+
+/* address of the Clock Control Register of the SSC */
+#define IFX_SSC_CLC 0x00000000
+/* IFX_SSC_CLC register is significant in bits 23 downto 8 and in bits 5, 3, 2, 0
+ bit 1 is hardware modified*/
+#define IFX_SSC_CLC_readmask 0x00FFFFEF
+#define IFX_SSC_CLC_writemask 0x00FFFF3D
+#define IFX_SSC_CLC_hwmask 0x00000002
+#define IFX_SSC_CLC_dontcare (IFX_SSC_CLC_readmask & IFX_SSC_CLC_writemask & ~IFX_SSC_CLC_hwmask)
+
+/* address of Port Input Select Register of the SSC */
+#define IFX_SSC_PISEL 0x00000004
+/* IFX_SSC_PISEL register is significant in lowest three bits only */
+#define IFX_SSC_PISEL_readmask 0x00000007
+#define IFX_SSC_PISEL_writemask 0x00000007
+#define IFX_SSC_PISEL_hwmask 0x00000000
+#define IFX_SSC_PISEL_dontcare (IFX_SSC_PISEL_readmask & IFX_SSC_PISEL_writemask & ~IFX_SSC_PISEL_hwmask)
+
+/* address of Identification Register of the SSC */
+#define IFX_SSC_ID 0x00000008
+/* IFX_SSC_ID register is significant in no bit */
+#define IFX_SSC_ID_readmask 0x0000FF3F
+#define IFX_SSC_ID_writemask 0x00000000
+#define IFX_SSC_ID_hwmask 0x00000000
+#define IFX_SSC_ID_dontcare (IFX_SSC_ID_readmask & IFX_SSC_ID_writemask & ~IFX_SSC_ID_hwmask)
+
+/* address of the Control Register of the SSC */
+#define IFX_SSC_CON 0x00000010
+/* IFX_SSC_CON register is significant in bits 23:22, 20:16 and 12:0 */
+#define IFX_SSC_CON_readmask 0x01DF1FFF
+#define IFX_SSC_CON_writemask 0x01DF1FFF
+#define IFX_SSC_CON_hwmask 0x00000000
+#define IFX_SSC_CON_dontcare (IFX_SSC_CON_readmask & IFX_SSC_CON_writemask & ~IFX_SSC_CON_hwmask)
+
+/* address of the Status Register of the SSC */
+#define IFX_SSC_STATE 0x00000014
+/* IFX_SSC_STATE register is readable in bits 30:28, 26:24, 20:16, 12:7 and 2:0
+ all bits except 1:0 are hardware modified */
+#define IFX_SSC_STATE_readmask 0x771F3F87
+#define IFX_SSC_STATE_writemask 0x00000000
+#define IFX_SSC_STATE_hwmask 0x771F3F84
+#define IFX_SSC_STATE_dontcare (IFX_SSC_STATE_readmask & IFX_SSC_STATE_writemask & ~IFX_SSC_STATE_hwmask)
+
+/* address of the Write Hardware Modified Control Register Bits of the SSC */
+#define IFX_SSC_WHBSTATE 0x00000018
+/* IFX_SSC_WHBSTATE register is write only */
+#define IFX_SSC_WHBSTATE_readmask 0x00000000
+#define IFX_SSC_WHBSTATE_writemask 0x0000FFFF
+#define IFX_SSC_WHBSTATE_hwmask 0x00000000
+#define IFX_SSC_WHBSTATE_dontcare (IFX_SSC_WHBSTATE_readmask & IFX_SSC_WHBSTATE_writemask & ~IFX_SSC_WHBSTATE_hwmask)
+
+/* address of the Baudrate Timer Reload Register of the SSC */
+#define IFX_SSC_BR 0x00000040
+/* IFX_SSC_BR register is significant in bit 15 downto 0*/
+#define IFX_SSC_BR_readmask 0x0000FFFF
+#define IFX_SSC_BR_writemask 0x0000FFFF
+#define IFX_SSC_BR_hwmask 0x00000000
+#define IFX_SSC_BR_dontcare (IFX_SSC_BR_readmask & IFX_SSC_BR_writemask & ~IFX_SSC_BR_hwmask)
+
+/* address of the Baudrate Timer Status Register of the SSC */
+#define IFX_SSC_BRSTAT 0x00000044
+/* IFX_SSC_BRSTAT register is significant in bit 15 downto 0*/
+#define IFX_SSC_BRSTAT_readmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_writemask 0x00000000
+#define IFX_SSC_BRSTAT_hwmask 0x0000FFFF
+#define IFX_SSC_BRSTAT_dontcare (IFX_SSC_BRSTAT_readmask & IFX_SSC_BRSTAT_writemask & ~IFX_SSC_BRSTAT_hwmask)
+
+/* address of the Transmitter Buffer Register of the SSC */
+#define IFX_SSC_TB 0x00000020
+/* IFX_SSC_TB register is significant in bit 31 downto 0*/
+#define IFX_SSC_TB_readmask 0xFFFFFFFF
+#define IFX_SSC_TB_writemask 0xFFFFFFFF
+#define IFX_SSC_TB_hwmask 0x00000000
+#define IFX_SSC_TB_dontcare (IFX_SSC_TB_readmask & IFX_SSC_TB_writemask & ~IFX_SSC_TB_hwmask)
+
+/* address of the Reciver Buffer Register of the SSC */
+#define IFX_SSC_RB 0x00000024
+/* IFX_SSC_RB register is significant in no bits*/
+#define IFX_SSC_RB_readmask 0xFFFFFFFF
+#define IFX_SSC_RB_writemask 0x00000000
+#define IFX_SSC_RB_hwmask 0xFFFFFFFF
+#define IFX_SSC_RB_dontcare (IFX_SSC_RB_readmask & IFX_SSC_RB_writemask & ~IFX_SSC_RB_hwmask)
+
+/* address of the Receive FIFO Control Register of the SSC */
+#define IFX_SSC_RXFCON 0x00000030
+/* IFX_SSC_RXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_RXFCON_readmask 0x00003F03
+#define IFX_SSC_RXFCON_writemask 0x00003F03
+#define IFX_SSC_RXFCON_hwmask 0x00000000
+#define IFX_SSC_RXFCON_dontcare (IFX_SSC_RXFCON_readmask & IFX_SSC_RXFCON_writemask & ~IFX_SSC_RXFCON_hwmask)
+
+/* address of the Transmit FIFO Control Register of the SSC */
+#define IFX_SSC_TXFCON 0x00000034
+/* IFX_SSC_TXFCON register is significant in bit 13 downto 8 and bit 1 downto 0 */
+#define IFX_SSC_TXFCON_readmask 0x00003F03
+#define IFX_SSC_TXFCON_writemask 0x00003F03
+#define IFX_SSC_TXFCON_hwmask 0x00000000
+#define IFX_SSC_TXFCON_dontcare (IFX_SSC_TXFCON_readmask & IFX_SSC_TXFCON_writemask & ~IFX_SSC_TXFCON_hwmask)
+
+/* address of the FIFO Status Register of the SSC */
+#define IFX_SSC_FSTAT 0x00000038
+/* IFX_SSC_FSTAT register is significant in no bit*/
+#define IFX_SSC_FSTAT_readmask 0x00003F3F
+#define IFX_SSC_FSTAT_writemask 0x00000000
+#define IFX_SSC_FSTAT_hwmask 0x00003F3F
+#define IFX_SSC_FSTAT_dontcare (IFX_SSC_FSTAT_readmask & IFX_SSC_FSTAT_writemask & ~IFX_SSC_FSTAT_hwmask)
+
+/* address of the Data Frame Control register of the SSC */
+#define IFX_SSC_SFCON 0x00000060
+#define IFX_SSC_SFCON_readmask 0xFFDFFFFD
+#define IFX_SSC_SFCON_writemask 0xFFDFFFFD
+#define IFX_SSC_SFCON_hwmask 0x00000000
+#define IFX_SSC_SFCON_dontcare (IFX_SSC_SFCON_readmask & IFX_SSC_SFCON_writemask & ~IFX_SSC_SFCON_hwmask)
+
+/* address of the Data Frame Status register of the SSC */
+#define IFX_SSC_SFSTAT 0x00000064
+#define IFX_SSC_SFSTAT_readmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_writemask 0x00000000
+#define IFX_SSC_SFSTAT_hwmask 0xFFC0FFF3
+#define IFX_SSC_SFSTAT_dontcare (IFX_SSC_SFSTAT_readmask & IFX_SSC_SFSTAT_writemask & ~IFX_SSC_SFSTAT_hwmask)
+
+/* address of the General Purpose Output Control register of the SSC */
+#define IFX_SSC_GPOCON 0x00000070
+#define IFX_SSC_GPOCON_readmask 0x0000FFFF
+#define IFX_SSC_GPOCON_writemask 0x0000FFFF
+#define IFX_SSC_GPOCON_hwmask 0x00000000
+#define IFX_SSC_GPOCON_dontcare (IFX_SSC_GPOCON_readmask & IFX_SSC_GPOCON_writemask & ~IFX_SSC_GPOCON_hwmask)
+
+/* address of the General Purpose Output Status register of the SSC */
+#define IFX_SSC_GPOSTAT 0x00000074
+#define IFX_SSC_GPOSTAT_readmask 0x000000FF
+#define IFX_SSC_GPOSTAT_writemask 0x00000000
+#define IFX_SSC_GPOSTAT_hwmask 0x00000000
+#define IFX_SSC_GPOSTAT_dontcare (IFX_SSC_GPOSTAT_readmask & IFX_SSC_GPOSTAT_writemask & ~IFX_SSC_GPOSTAT_hwmask)
+
+/* address of the Force GPO Status register of the SSC */
+#define IFX_SSC_WHBGPOSTAT 0x00000078
+#define IFX_SSC_WHBGPOSTAT_readmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_writemask 0x0000FFFF
+#define IFX_SSC_WHBGPOSTAT_hwmask 0x00000000
+#define IFX_SSC_WHBGPOSTAT_dontcare (IFX_SSC_WHBGPOSTAT_readmask & IFX_SSC_WHBGPOSTAT_writemask & ~IFX_SSC_WHBGPOSTAT_hwmask)
+
+/* address of the Receive Request Register of the SSC */
+#define IFX_SSC_RXREQ 0x00000080
+#define IFX_SSC_RXREQ_readmask 0x0000FFFF
+#define IFX_SSC_RXREQ_writemask 0x0000FFFF
+#define IFX_SSC_RXREQ_hwmask 0x00000000
+#define IFX_SSC_RXREQ_dontcare (IFX_SSC_RXREQ_readmask & IFX_SSC_RXREQ_writemask & ~IFX_SSC_RXREQ_hwmask)
+
+/* address of the Receive Count Register of the SSC */
+#define IFX_SSC_RXCNT 0x00000084
+#define IFX_SSC_RXCNT_readmask 0x0000FFFF
+#define IFX_SSC_RXCNT_writemask 0x00000000
+#define IFX_SSC_RXCNT_hwmask 0x0000FFFF
+#define IFX_SSC_RXCNT_dontcare (IFX_SSC_RXCNT_readmask & IFX_SSC_RXCNT_writemask & ~IFX_SSC_RXCNT_hwmask)
+
+/* address of the DMA Configuration Register of the SSC */
+#define IFX_SSC_DMACON 0x000000EC
+#define IFX_SSC_DMACON_readmask 0x0000FFFF
+#define IFX_SSC_DMACON_writemask 0x00000000
+#define IFX_SSC_DMACON_hwmask 0x0000FFFF
+#define IFX_SSC_DMACON_dontcare (IFX_SSC_DMACON_readmask & IFX_SSC_DMACON_writemask & ~IFX_SSC_DMACON_hwmask)
+
+//------------------------------------------------------
+// interrupt register for enabling interrupts, mask register of irq_reg
+#define IFX_SSC_IRN_EN 0xF4
+// read/write
+#define IFX_SSC_IRN_EN_readmask 0x0000000F
+#define IFX_SSC_IRN_EN_writemask 0x0000000F
+#define IFX_SSC_IRN_EN_hwmask 0x00000000
+#define IFX_SSC_IRN_EN_dontcare (IFX_SSC_IRN_EN_readmask & IFX_SSC_IRN_EN_writemask & ~IFX_SSC_IRN_EN_hwmask)
+
+// interrupt register for accessing interrupts
+#define IFX_SSC_IRN_CR 0xF8
+// read/write
+#define IFX_SSC_IRN_CR_readmask 0x0000000F
+#define IFX_SSC_IRN_CR_writemask 0x0000000F
+#define IFX_SSC_IRN_CR_hwmask 0x0000000F
+#define IFX_SSC_IRN_CR_dontcare (IFX_SSC_IRN_CR_readmask & IFX_SSC_IRN_CR_writemask & ~IFX_SSC_IRN_CR_hwmask)
+
+// interrupt register for stimulating interrupts
+#define IFX_SSC_IRN_ICR 0xFC
+// read/write
+#define IFX_SSC_IRN_ICR_readmask 0x0000000F
+#define IFX_SSC_IRN_ICR_writemask 0x0000000F
+#define IFX_SSC_IRN_ICR_hwmask 0x00000000
+#define IFX_SSC_IRN_ICR_dontcare (IFX_SSC_IRN_ICR_readmask & IFX_SSC_IRN_ICR_writemask & ~IFX_SSC_IRN_ICR_hwmask)
+
+//---------------------------------------------------------------------
+// Number of IRQs and bitposition of IRQ
+#define IFX_SSC_NUM_IRQ 4
+#define IFX_SSC_T_BIT 0x00000001
+#define IFX_SSC_R_BIT 0x00000002
+#define IFX_SSC_E_BIT 0x00000004
+#define IFX_SSC_F_BIT 0x00000008
+
+/* bit masks for SSC registers */
+
+/* ID register */
+#define IFX_SSC_PERID_REV_MASK 0x0000001F
+#define IFX_SSC_PERID_CFG_MASK 0x00000020
+#define IFX_SSC_PERID_ID_MASK 0x0000FF00
+#define IFX_SSC_PERID_REV_OFFSET 0
+#define IFX_SSC_PERID_CFG_OFFSET 5
+#define IFX_SSC_PERID_ID_OFFSET 8
+#define IFX_SSC_PERID_ID 0x45
+#define IFX_SSC_PERID_DMA_ON 0x00000020
+#define IFX_SSC_PERID_RXFS_MASK 0x003F0000
+#define IFX_SSC_PERID_RXFS_OFFSET 16
+#define IFX_SSC_PERID_TXFS_MASK 0x3F000000
+#define IFX_SSC_PERID_TXFS_OFFSET 24
+
+/* PISEL register */
+#define IFX_SSC_PISEL_MASTER_IN_A 0x0000
+#define IFX_SSC_PISEL_MASTER_IN_B 0x0001
+#define IFX_SSC_PISEL_SLAVE_IN_A 0x0000
+#define IFX_SSC_PISEL_SLAVE_IN_B 0x0002
+#define IFX_SSC_PISEL_CLOCK_IN_A 0x0000
+#define IFX_SSC_PISEL_CLOCK_IN_B 0x0004
+
+/* IFX_SSC_CON register */
+#define IFX_SSC_CON_ECHO_MODE_ON 0x01000000
+#define IFX_SSC_CON_ECHO_MODE_OFF 0x00000000
+#define IFX_SSC_CON_IDLE_HIGH 0x00800000
+#define IFX_SSC_CON_IDLE_LOW 0x00000000
+#define IFX_SSC_CON_ENABLE_BYTE_VALID 0x00400000
+#define IFX_SSC_CON_DISABLE_BYTE_VALID 0x00000000
+#define IFX_SSC_CON_DATA_WIDTH_OFFSET 16
+#define IFX_SSC_CON_DATA_WIDTH_MASK 0x001F0000
+#define IFX_SSC_ENCODE_DATA_WIDTH(width) (((width - 1) << IFX_SSC_CON_DATA_WIDTH_OFFSET) & IFX_SSC_CON_DATA_WIDTH_MASK)
+
+#define IFX_SSC_CON_RESET_ON_BAUDERR 0x00002000
+#define IFX_SSC_CON_GO_ON_ON_BAUDERR 0x00000000
+
+#define IFX_SSC_CON_RX_UFL_CHECK 0x00001000
+#define IFX_SSC_CON_RX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_UFL_CHECK 0x00000800
+#define IFX_SSC_CON_TX_UFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ABORT_ERR_CHECK 0x00000400
+#define IFX_SSC_CON_ABORT_ERR_IGNORE 0x00000000
+#define IFX_SSC_CON_RX_OFL_CHECK 0x00000200
+#define IFX_SSC_CON_RX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_TX_OFL_CHECK 0x00000100
+#define IFX_SSC_CON_TX_OFL_IGNORE 0x00000000
+#define IFX_SSC_CON_ALL_ERR_CHECK 0x00001F00
+#define IFX_SSC_CON_ALL_ERR_IGNORE 0x00000000
+
+#define IFX_SSC_CON_LOOPBACK_MODE 0x00000080
+#define IFX_SSC_CON_NO_LOOPBACK 0x00000000
+#define IFX_SSC_CON_HALF_DUPLEX 0x00000080
+#define IFX_SSC_CON_FULL_DUPLEX 0x00000000
+#define IFX_SSC_CON_CLOCK_FALL 0x00000040
+#define IFX_SSC_CON_CLOCK_RISE 0x00000000
+#define IFX_SSC_CON_SHIFT_THEN_LATCH 0x00000000
+#define IFX_SSC_CON_LATCH_THEN_SHIFT 0x00000020
+#define IFX_SSC_CON_MSB_FIRST 0x00000010
+#define IFX_SSC_CON_LSB_FIRST 0x00000000
+#define IFX_SSC_CON_ENABLE_CSB 0x00000008
+#define IFX_SSC_CON_DISABLE_CSB 0x00000000
+#define IFX_SSC_CON_INVERT_CSB 0x00000004
+#define IFX_SSC_CON_TRUE_CSB 0x00000000
+#define IFX_SSC_CON_RX_OFF 0x00000002
+#define IFX_SSC_CON_RX_ON 0x00000000
+#define IFX_SSC_CON_TX_OFF 0x00000001
+#define IFX_SSC_CON_TX_ON 0x00000000
+
+/* IFX_SSC_STATE register */
+#define IFX_SSC_STATE_RX_BYTE_VALID_OFFSET 28
+#define IFX_SSC_STATE_RX_BYTE_VALID_MASK 0x70000000
+#define IFX_SSC_DECODE_RX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_RX_BYTE_VALID_MASK) >> IFX_SSC_STATE_RX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_TX_BYTE_VALID_OFFSET 24
+#define IFX_SSC_STATE_TX_BYTE_VALID_MASK 0x07000000
+#define IFX_SSC_DECODE_TX_BYTE_VALID(con_state) ((con_state & IFX_SSC_STATE_TX_BYTE_VALID_MASK) >> IFX_SSC_STATE_TX_BYTE_VALID_OFFSET)
+#define IFX_SSC_STATE_BIT_COUNT_OFFSET 16
+#define IFX_SSC_STATE_BIT_COUNT_MASK 0x001F0000
+#define IFX_SSC_DECODE_DATA_WIDTH(con_state) (((con_state & IFX_SSC_STATE_BIT_COUNT_MASK) >> IFX_SSC_STATE_BIT_COUNT_OFFSET) + 1)
+#define IFX_SSC_STATE_BUSY 0x00002000
+#define IFX_SSC_STATE_RX_UFL 0x00001000
+#define IFX_SSC_STATE_TX_UFL 0x00000800
+#define IFX_SSC_STATE_ABORT_ERR 0x00000400
+#define IFX_SSC_STATE_RX_OFL 0x00000200
+#define IFX_SSC_STATE_TX_OFL 0x00000100
+#define IFX_SSC_STATE_MODE_ERR 0x00000080
+#define IFX_SSC_STATE_SLAVE_IS_SELECTED 0x00000004
+#define IFX_SSC_STATE_IS_MASTER 0x00000002
+#define IFX_SSC_STATE_IS_ENABLED 0x00000001
+
+/* WHBSTATE register */
+#define IFX_SSC_WHBSTATE_DISABLE_SSC 0x0001
+#define IFX_SSC_WHBSTATE_CONFIGURATION_MODE 0x0001
+#define IFX_SSC_WHBSTATE_CLR_ENABLE 0x0001
+
+#define IFX_SSC_WHBSTATE_ENABLE_SSC 0x0002
+#define IFX_SSC_WHBSTATE_RUN_MODE 0x0002
+#define IFX_SSC_WHBSTATE_SET_ENABLE 0x0002
+
+#define IFX_SSC_WHBSTATE_SLAVE_MODE 0x0004
+#define IFX_SSC_WHBSTATE_CLR_MASTER_SELECT 0x0004
+
+#define IFX_SSC_WHBSTATE_MASTER_MODE 0x0008
+#define IFX_SSC_WHBSTATE_SET_MASTER_SELECT 0x0008
+
+#define IFX_SSC_WHBSTATE_CLR_RX_UFL_ERROR 0x0010
+#define IFX_SSC_WHBSTATE_SET_RX_UFL_ERROR 0x0020
+
+#define IFX_SSC_WHBSTATE_CLR_MODE_ERROR 0x0040
+#define IFX_SSC_WHBSTATE_SET_MODE_ERROR 0x0080
+
+#define IFX_SSC_WHBSTATE_CLR_TX_OFL_ERROR 0x0100
+#define IFX_SSC_WHBSTATE_CLR_RX_OFL_ERROR 0x0200
+#define IFX_SSC_WHBSTATE_CLR_ABORT_ERROR 0x0400
+#define IFX_SSC_WHBSTATE_CLR_TX_UFL_ERROR 0x0800
+#define IFX_SSC_WHBSTATE_SET_TX_OFL_ERROR 0x1000
+#define IFX_SSC_WHBSTATE_SET_RX_OFL_ERROR 0x2000
+#define IFX_SSC_WHBSTATE_SET_ABORT_ERROR 0x4000
+#define IFX_SSC_WHBSTATE_SET_TX_UFL_ERROR 0x8000
+#define IFX_SSC_WHBSTATE_CLR_ALL_ERROR 0x0F50
+#define IFX_SSC_WHBSTATE_SET_ALL_ERROR 0xF0A0
+
+/* BR register */
+#define IFX_SSC_BR_BAUDRATE_OFFSET 0
+#define IFX_SSC_BR_BAUDRATE_MASK 0xFFFF
+
+/* BR_STAT register */
+#define IFX_SSC_BRSTAT_BAUDTIMER_OFFSET 0
+#define IFX_SSC_BRSTAT_BAUDTIMER_MASK 0xFFFF
+
+/* TB register */
+#define IFX_SSC_TB_DATA_OFFSET 0
+#define IFX_SSC_TB_DATA_MASK 0xFFFFFFFF
+
+/* RB register */
+#define IFX_SSC_RB_DATA_OFFSET 0
+#define IFX_SSC_RB_DATA_MASK 0xFFFFFFFF
+
+/* RXFCON and TXFCON registers */
+#define IFX_SSC_XFCON_FIFO_DISABLE 0x0000
+#define IFX_SSC_XFCON_FIFO_ENABLE 0x0001
+#define IFX_SSC_XFCON_FIFO_FLUSH 0x0002
+#define IFX_SSC_XFCON_ITL_MASK 0x00003F00
+#define IFX_SSC_XFCON_ITL_OFFSET 8
+
+/* FSTAT register */
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_OFFSET 0
+#define IFX_SSC_FSTAT_RECEIVED_WORDS_MASK 0x003F
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_OFFSET 8
+#define IFX_SSC_FSTAT_TRANSMIT_WORDS_MASK 0x3F00
+
+/* GPOCON register */
+#define IFX_SSC_GPOCON_INVOUT0_POS 0
+#define IFX_SSC_GPOCON_INV_OUT0 0x00000001
+#define IFX_SSC_GPOCON_TRUE_OUT0 0x00000000
+#define IFX_SSC_GPOCON_INVOUT1_POS 1
+#define IFX_SSC_GPOCON_INV_OUT1 0x00000002
+#define IFX_SSC_GPOCON_TRUE_OUT1 0x00000000
+#define IFX_SSC_GPOCON_INVOUT2_POS 2
+#define IFX_SSC_GPOCON_INV_OUT2 0x00000003
+#define IFX_SSC_GPOCON_TRUE_OUT2 0x00000000
+#define IFX_SSC_GPOCON_INVOUT3_POS 3
+#define IFX_SSC_GPOCON_INV_OUT3 0x00000008
+#define IFX_SSC_GPOCON_TRUE_OUT3 0x00000000
+#define IFX_SSC_GPOCON_INVOUT4_POS 4
+#define IFX_SSC_GPOCON_INV_OUT4 0x00000010
+#define IFX_SSC_GPOCON_TRUE_OUT4 0x00000000
+#define IFX_SSC_GPOCON_INVOUT5_POS 5
+#define IFX_SSC_GPOCON_INV_OUT5 0x00000020
+#define IFX_SSC_GPOCON_TRUE_OUT5 0x00000000
+#define IFX_SSC_GPOCON_INVOUT6_POS 6
+#define IFX_SSC_GPOCON_INV_OUT6 0x00000040
+#define IFX_SSC_GPOCON_TRUE_OUT6 0x00000000
+#define IFX_SSC_GPOCON_INVOUT7_POS 7
+#define IFX_SSC_GPOCON_INV_OUT7 0x00000080
+#define IFX_SSC_GPOCON_TRUE_OUT7 0x00000000
+#define IFX_SSC_GPOCON_INV_OUT_ALL 0x000000FF
+#define IFX_SSC_GPOCON_TRUE_OUT_ALL 0x00000000
+
+#define IFX_SSC_GPOCON_ISCSB0_POS 8
+#define IFX_SSC_GPOCON_IS_CSB0 0x00000100
+#define IFX_SSC_GPOCON_IS_GPO0 0x00000000
+#define IFX_SSC_GPOCON_ISCSB1_POS 9
+#define IFX_SSC_GPOCON_IS_CSB1 0x00000200
+#define IFX_SSC_GPOCON_IS_GPO1 0x00000000
+#define IFX_SSC_GPOCON_ISCSB2_POS 10
+#define IFX_SSC_GPOCON_IS_CSB2 0x00000400
+#define IFX_SSC_GPOCON_IS_GPO2 0x00000000
+#define IFX_SSC_GPOCON_ISCSB3_POS 11
+#define IFX_SSC_GPOCON_IS_CSB3 0x00000800
+#define IFX_SSC_GPOCON_IS_GPO3 0x00000000
+#define IFX_SSC_GPOCON_ISCSB4_POS 12
+#define IFX_SSC_GPOCON_IS_CSB4 0x00001000
+#define IFX_SSC_GPOCON_IS_GPO4 0x00000000
+#define IFX_SSC_GPOCON_ISCSB5_POS 13
+#define IFX_SSC_GPOCON_IS_CSB5 0x00002000
+#define IFX_SSC_GPOCON_IS_GPO5 0x00000000
+#define IFX_SSC_GPOCON_ISCSB6_POS 14
+#define IFX_SSC_GPOCON_IS_CSB6 0x00004000
+#define IFX_SSC_GPOCON_IS_GPO6 0x00000000
+#define IFX_SSC_GPOCON_ISCSB7_POS 15
+#define IFX_SSC_GPOCON_IS_CSB7 0x00008000
+#define IFX_SSC_GPOCON_IS_GPO7 0x00000000
+#define IFX_SSC_GPOCON_IS_CSB_ALL 0x0000FF00
+#define IFX_SSC_GPOCON_IS_GPO_ALL 0x00000000
+
+/* GPOSTAT register */
+#define IFX_SSC_GPOSTAT_OUT0 0x00000001
+#define IFX_SSC_GPOSTAT_OUT1 0x00000002
+#define IFX_SSC_GPOSTAT_OUT2 0x00000004
+#define IFX_SSC_GPOSTAT_OUT3 0x00000008
+#define IFX_SSC_GPOSTAT_OUT4 0x00000010
+#define IFX_SSC_GPOSTAT_OUT5 0x00000020
+#define IFX_SSC_GPOSTAT_OUT6 0x00000040
+#define IFX_SSC_GPOSTAT_OUT7 0x00000080
+#define IFX_SSC_GPOSTAT_OUT_ALL 0x000000FF
+
+/* WHBGPOSTAT register */
+#define IFX_SSC_WHBGPOSTAT_CLROUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT0 0x00000001
+#define IFX_SSC_WHBGPOSTAT_CLROUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT1 0x00000002
+#define IFX_SSC_WHBGPOSTAT_CLROUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT2 0x00000004
+#define IFX_SSC_WHBGPOSTAT_CLROUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT3 0x00000008
+#define IFX_SSC_WHBGPOSTAT_CLROUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT4 0x00000010
+#define IFX_SSC_WHBGPOSTAT_CLROUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT5 0x00000020
+#define IFX_SSC_WHBGPOSTAT_CLROUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT6 0x00000040
+#define IFX_SSC_WHBGPOSTAT_CLROUT7_POS 7
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT7 0x00000080
+#define IFX_SSC_WHBGPOSTAT_CLR_OUT_ALL 0x000000FF
+
+#define IFX_SSC_WHBGPOSTAT_OUT0_POS 0
+#define IFX_SSC_WHBGPOSTAT_OUT1_POS 1
+#define IFX_SSC_WHBGPOSTAT_OUT2_POS 2
+#define IFX_SSC_WHBGPOSTAT_OUT3_POS 3
+#define IFX_SSC_WHBGPOSTAT_OUT4_POS 4
+#define IFX_SSC_WHBGPOSTAT_OUT5_POS 5
+#define IFX_SSC_WHBGPOSTAT_OUT6_POS 6
+#define IFX_SSC_WHBGPOSTAT_OUT7_POS 7
+
+#define IFX_SSC_WHBGPOSTAT_SETOUT0_POS 8
+#define IFX_SSC_WHBGPOSTAT_SET_OUT0 0x00000100
+#define IFX_SSC_WHBGPOSTAT_SETOUT1_POS 9
+#define IFX_SSC_WHBGPOSTAT_SET_OUT1 0x00000200
+#define IFX_SSC_WHBGPOSTAT_SETOUT2_POS 10
+#define IFX_SSC_WHBGPOSTAT_SET_OUT2 0x00000400
+#define IFX_SSC_WHBGPOSTAT_SETOUT3_POS 11
+#define IFX_SSC_WHBGPOSTAT_SET_OUT3 0x00000800
+#define IFX_SSC_WHBGPOSTAT_SETOUT4_POS 12
+#define IFX_SSC_WHBGPOSTAT_SET_OUT4 0x00001000
+#define IFX_SSC_WHBGPOSTAT_SETOUT5_POS 13
+#define IFX_SSC_WHBGPOSTAT_SET_OUT5 0x00002000
+#define IFX_SSC_WHBGPOSTAT_SETOUT6_POS 14
+#define IFX_SSC_WHBGPOSTAT_SET_OUT6 0x00004000
+#define IFX_SSC_WHBGPOSTAT_SETOUT7_POS 15
+#define IFX_SSC_WHBGPOSTAT_SET_OUT7 0x00008000
+#define IFX_SSC_WHBGPOSTAT_SET_OUT_ALL 0x0000FF00
+
+/* SFCON register */
+#define IFX_SSC_SFCON_SF_ENABLE 0x00000001
+#define IFX_SSC_SFCON_SF_DISABLE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_BEFORE_PAUSE 0x00000004
+#define IFX_SSC_SFCON_FIR_DISABLE_BEFORE_PAUSE 0x00000000
+#define IFX_SSC_SFCON_FIR_ENABLE_AFTER_PAUSE 0x00000008
+#define IFX_SSC_SFCON_FIR_DISABLE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_DATA_LENGTH_MASK 0x0000FFF0
+#define IFX_SSC_SFCON_DATA_LENGTH_OFFSET 4
+#define IFX_SSC_SFCON_PAUSE_DATA_MASK 0x00030000
+#define IFX_SSC_SFCON_PAUSE_DATA_OFFSET 16
+#define IFX_SSC_SFCON_PAUSE_DATA_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_DATA_1 0x00010000
+#define IFX_SSC_SFCON_PAUSE_DATA_IDLE 0x00020000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_MASK 0x000C0000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_OFFSET 18
+#define IFX_SSC_SFCON_PAUSE_CLOCK_0 0x00000000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_1 0x00040000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_IDLE 0x00080000
+#define IFX_SSC_SFCON_PAUSE_CLOCK_RUN 0x000C0000
+#define IFX_SSC_SFCON_STOP_AFTER_PAUSE 0x00100000
+#define IFX_SSC_SFCON_CONTINUE_AFTER_PAUSE 0x00000000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MASK 0xFFC00000
+#define IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET 22
+#define IFX_SSC_SFCON_DATA_LENGTH_MAX 4096
+#define IFX_SSC_SFCON_PAUSE_LENGTH_MAX 1024
+
+#define IFX_SSC_SFCON_EXTRACT_DATA_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_DATA_LENGTH_MASK) >> IFX_SSC_SFCON_DATA_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_EXTRACT_PAUSE_LENGTH(sfcon) ((sfcon & IFX_SSC_SFCON_PAUSE_LENGTH_MASK) >> IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET)
+#define IFX_SSC_SFCON_SET_DATA_LENGTH(value) ((value << IFX_SSC_SFCON_DATA_LENGTH_OFFSET) & IFX_SSC_SFCON_DATA_LENGTH_MASK)
+#define IFX_SSC_SFCON_SET_PAUSE_LENGTH(value) ((value << IFX_SSC_SFCON_PAUSE_LENGTH_OFFSET) & IFX_SSC_SFCON_PAUSE_LENGTH_MASK)
+
+/* SFSTAT register */
+#define IFX_SSC_SFSTAT_IN_DATA 0x00000001
+#define IFX_SSC_SFSTAT_IN_PAUSE 0x00000002
+#define IFX_SSC_SFSTAT_DATA_COUNT_MASK 0x0000FFF0
+#define IFX_SSC_SFSTAT_DATA_COUNT_OFFSET 4
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_MASK 0xFFF00000
+#define IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET 20
+
+#define IFX_SSC_SFSTAT_EXTRACT_DATA_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_DATA_COUNT_MASK) >> IFX_SSC_SFSTAT_DATA_COUNT_OFFSET)
+#define IFX_SSC_SFSTAT_EXTRACT_PAUSE_COUNT(sfstat) ((sfstat & IFX_SSC_SFSTAT_PAUSE_COUNT_MASK) >> IFX_SSC_SFSTAT_PAUSE_COUNT_OFFSET)
+
+/* RXREQ register */
+#define IFX_SSC_RXREQ_RXCOUNT_MASK 0x0000FFFF
+#define IFX_SSC_RXREQ_RXCOUNT_OFFSET 0
+
+/* RXCNT register */
+#define IFX_SSC_RXCNT_TODO_MASK 0x0000FFFF
+#define IFX_SSC_RXCNT_TODO_OFFSET 0
+
+/* DMACON register */
+#define IFX_SSC_DMACON_RXON 0x00000001
+#define IFX_SSC_DMACON_RXOFF 0x00000000
+#define IFX_SSC_DMACON_TXON 0x00000002
+#define IFX_SSC_DMACON_TXOFF 0x00000000
+#define IFX_SSC_DMACON_DMAON 0x00000003
+#define IFX_SSC_DMACON_DMAOFF 0x00000000
+#define IFX_SSC_DMACON_CLASS_MASK 0x0000000C
+#define IFX_SSC_DMACON_CLASS_OFFSET 2
+
+/* register access macros */
+#define ifx_ssc_fstat_received_words(status) (status & 0x003F)
+#define ifx_ssc_fstat_words_to_transmit(status) ((status & 0x3F00) >> 8)
+
+#define ifx_ssc_change_status(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_WHBSTATE))
+#define ifx_ssc_set_config(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_config(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_CON))
+#define ifx_ssc_get_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_STATE))
+#define ifx_ssc_receive(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_RB))
+#define ifx_ssc_transmit(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_TB))
+#define ifx_ssc_fifo_status(addr) READ_PERIPHERAL_REGISTER((PHYS_OFFSET + addr + IFX_SSC_FSTAT))
+#define ifx_ssc_set_baudrate(data, addr) WRITE_PERIPHERAL_REGISTER(data, (PHYS_OFFSET + addr + IFX_SSC_BR))
+
+#define ifx_ssc_extract_rx_fifo_size(id) ((id & IFX_SSC_PERID_RXFS_MASK) >> IFX_SSC_PERID_RXFS_OFFSET)
+#define ifx_ssc_extract_tx_fifo_size(id) ((id & IFX_SSC_PERID_TXFS_MASK) >> IFX_SSC_PERID_TXFS_OFFSET)
+
+#endif
--- /dev/null
+#ifndef __DANUBE_IRQ_H
+#define __DANUBE_IRQ_H
+
+#define NR_IRQS 256
+#include_next <irq.h>
+
+#endif
+
--- /dev/null
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/image.mk
+
+define Image/BuildKernel
+ $(STAGING_DIR_HOST)/bin/lzma e $(KDIR)/vmlinux $(KDIR)/vmlinux.lzma
+ mkimage -A mips -O linux -T kernel -a 0x80002000 -C lzma -e \
+ 0x80002000 \
+ -n 'MIPS OpenWrt Linux-$(LINUX_VERSION)' \
+ -d $(KDIR)/vmlinux.lzma $(KDIR)/uImage
+
+ cp $(KDIR)/uImage $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-uImage
+endef
+
+define Image/Build/squashfs
+ cat $(KDIR)/uImage $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
+ $(call prepare_generic_squashfs,$(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image)
+endef
+
+define Image/Build/jffs2-64k
+ dd if=$(KDIR)/uImage of=$(KDIR)/uImage.$(1) bs=64k conv=sync
+ cat $(KDIR)/uImage.$(1) $(KDIR)/root.$(1) > $(BIN_DIR)/openwrt-$(BOARD)-$(KERNEL)-$(1).image
+endef
+
+define Image/Build
+ $(call Image/Build/$(1),$(1))
+endef
+
+$(eval $(call BuildImage))
--- /dev/null
+Index: linux-2.6.23/arch/mips/Kconfig
+===================================================================
+--- linux-2.6.23.orig/arch/mips/Kconfig 2007-10-16 22:12:19.000000000 +0200
++++ linux-2.6.23/arch/mips/Kconfig 2007-10-16 22:12:21.000000000 +0200
+@@ -58,6 +58,17 @@
+ select SYS_SUPPORTS_LITTLE_ENDIAN
+ select GENERIC_HARDIRQS_NO__DO_IRQ
+
++config DANUBE
++ bool "Danube support"
++ select DMA_NONCOHERENT
++ select IRQ_CPU
++ select SYS_HAS_CPU_MIPS32_R1
++ select HAVE_STD_PC_SERIAL_PORT
++ select SYS_SUPPORTS_BIG_ENDIAN
++ select SYS_SUPPORTS_32BIT_KERNEL
++ select SYS_HAS_EARLY_PRINTK
++ select HW_HAS_PCI
++
+ config MACH_DECSTATION
+ bool "DECstations"
+ select BOOT_ELF32
+@@ -605,6 +615,7 @@
+ source "arch/mips/tx4927/Kconfig"
+ source "arch/mips/tx4938/Kconfig"
+ source "arch/mips/vr41xx/Kconfig"
++source "arch/mips/danube/Kconfig"
+
+ endmenu
+
+Index: linux-2.6.23/arch/mips/Makefile
+===================================================================
+--- linux-2.6.23.orig/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
++++ linux-2.6.23/arch/mips/Makefile 2007-10-16 22:12:21.000000000 +0200
+@@ -276,6 +276,13 @@
+ cflags-$(CONFIG_MIPS_COBALT) += -Iinclude/asm-mips/mach-cobalt
+ load-$(CONFIG_MIPS_COBALT) += 0xffffffff80080000
+
++#
++# Infineon DANUBE
++#
++core-$(CONFIG_DANUBE) += arch/mips/danube/
++cflags-$(CONFIG_DANUBE) += -Iinclude/asm-mips/mach-danube
++load-$(CONFIG_DANUBE) += 0xffffffff80002000
++
+ #
+ # DECstation family
+ #
+Index: linux-2.6.23/include/asm-mips/bootinfo.h
+===================================================================
+--- linux-2.6.23.orig/include/asm-mips/bootinfo.h 2007-10-16 22:12:19.000000000 +0200
++++ linux-2.6.23/include/asm-mips/bootinfo.h 2007-10-16 22:12:21.000000000 +0200
+@@ -208,6 +208,13 @@
+ #define MACH_GROUP_WINDRIVER 28 /* Windriver boards */
+ #define MACH_WRPPMC 1
+
++/*
++ * Valid machtype for group ATHEROS
++ */
++#define MACH_GROUP_DANUBE 29
++#define MACH_INFINEON_DANUBE 0
++
++
+ #define CL_SIZE COMMAND_LINE_SIZE
+
+ const char *get_system_type(void);
--- /dev/null
+Index: linux-2.6.23/drivers/serial/Kconfig
+===================================================================
+--- linux-2.6.23.orig/drivers/serial/Kconfig 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/serial/Kconfig 2007-12-13 20:41:57.000000000 +0100
+@@ -1259,4 +1259,10 @@
+ Currently, only 8250 compatible ports are supported, but
+ others can easily be added.
+
++config SERIAL_DANUBE
++ bool "Danube serial driver"
++ depends on DANUBE
++ help
++ Driver for the danubes built in ASC hardware
++
+ endmenu
+Index: linux-2.6.23/drivers/serial/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/serial/Makefile 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/serial/Makefile 2007-12-13 20:41:57.000000000 +0100
+@@ -64,3 +64,4 @@
+ obj-$(CONFIG_SERIAL_NETX) += netx-serial.o
+ obj-$(CONFIG_SERIAL_OF_PLATFORM) += of_serial.o
+ obj-$(CONFIG_SERIAL_KS8695) += serial_ks8695.o
++obj-$(CONFIG_SERIAL_DANUBE) += danube_asc.o
+Index: linux-2.6.23/drivers/mtd/maps/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/mtd/maps/Makefile 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/mtd/maps/Makefile 2007-12-13 20:41:57.000000000 +0100
+@@ -71,3 +71,4 @@
+ obj-$(CONFIG_MTD_OMAP_NOR) += omap_nor.o
+ obj-$(CONFIG_MTD_MTX1) += mtx-1_flash.o
+ obj-$(CONFIG_MTD_TQM834x) += tqm834x.o
++obj-$(CONFIG_MTD_DANUBE) += danube.o
+Index: linux-2.6.23/drivers/net/Kconfig
+===================================================================
+--- linux-2.6.23.orig/drivers/net/Kconfig 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/net/Kconfig 2007-12-13 20:41:57.000000000 +0100
+@@ -339,6 +339,18 @@
+
+ source "drivers/net/arm/Kconfig"
+
++config DANUBE_MII0
++ tristate "Infineon Danube eth0 driver"
++ depends on DANUBE
++ help
++ Support for the MII0 inside the Danube SOC
++
++config DANUBE_MII1
++ tristate "Infineon Danube eth1 driver"
++ depends on DANUBE
++ help
++ Support for the MII1 inside the Danube SOC
++
+ config AX88796
+ tristate "ASIX AX88796 NE2000 clone support"
+ depends on ARM || MIPS
+Index: linux-2.6.23/drivers/net/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/net/Makefile 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/net/Makefile 2007-12-13 20:41:57.000000000 +0100
+@@ -208,6 +208,7 @@
+ obj-$(CONFIG_FEC_8XX) += fec_8xx/
+ obj-$(CONFIG_PASEMI_MAC) += pasemi_mac.o
+ obj-$(CONFIG_MLX4_CORE) += mlx4/
++obj-$(CONFIG_DANUBE_MII0) += danube_mii0.o
+
+ obj-$(CONFIG_MACB) += macb.o
+
+Index: linux-2.6.23/drivers/char/watchdog/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/char/watchdog/Makefile 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/char/watchdog/Makefile 2007-12-13 20:41:57.000000000 +0100
+@@ -90,6 +90,7 @@
+ obj-$(CONFIG_INDYDOG) += indydog.o
+ obj-$(CONFIG_WDT_MTX1) += mtx-1_wdt.o
+ obj-$(CONFIG_WDT_RM9K_GPI) += rm9k_wdt.o
++obj-$(CONFIG_DANUBE_WDT) += danube_wdt.o
+
+ # PARISC Architecture
+
+Index: linux-2.6.23/drivers/char/Makefile
+===================================================================
+--- linux-2.6.23.orig/drivers/char/Makefile 2007-12-13 20:41:42.000000000 +0100
++++ linux-2.6.23/drivers/char/Makefile 2007-12-14 22:41:07.000000000 +0100
+@@ -135,3 +135,8 @@
+ rm $@.tmp
+
+ endif
++
++obj-$(CONFIG_DANUBE_LED) += danube_led.o
++obj-$(CONFIG_DANUBE_GPIO) += danube_gpio.o
++obj-$(CONFIG_DANUBE_SSC) += danube_ssc.o
++obj-$(CONFIG_DANUBE_EEPROM) += danube_eeprom.o
--- /dev/null
+Index: linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c
+===================================================================
+--- linux-2.6.23.orig/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:02:29.000000000 +0100
++++ linux-2.6.23/drivers/mtd/chips/cfi_cmdset_0002.c 2007-11-02 23:07:15.000000000 +0100
+@@ -1007,7 +1007,9 @@
+ int ret = 0;
+ map_word oldd;
+ int retry_cnt = 0;
+-
++#ifdef CONFIG_DANUBE
++ adr ^= 2;
++#endif
+ adr += chip->start;
+
+ spin_lock(chip->mutex);
--- /dev/null
+Makefile
+base-files/etc/config/network
+config-2.6.23
+files/arch/mips/danube/Kconfig
+files/arch/mips/danube/Makefile
+files/arch/mips/danube/built-in.o
+files/arch/mips/danube/dma-core.c
+files/arch/mips/danube/dma-core.h
+files/arch/mips/danube/dma-core.o
+files/arch/mips/danube/interrupt.c
+files/arch/mips/danube/interrupt.o
+files/arch/mips/danube/kgdb_serial.c
+files/arch/mips/danube/pci.c
+files/arch/mips/danube/prom.c
+files/arch/mips/danube/prom.o
+files/arch/mips/danube/reset.c
+files/arch/mips/danube/reset.o
+files/arch/mips/danube/setup.c
+files/arch/mips/danube/setup.o
+files/drivers/mtd/maps/danube.c
+files/drivers/serial/danube_asc.c
+files/drivers/serial/danube_asc.c~
+files/drivers/serial/danube_asc.o
+files/include/asm-mips/danube/adm6996.h
+files/include/asm-mips/danube/atm_mib.h
+files/include/asm-mips/danube/danube.h
+files/include/asm-mips/danube/danube_bcu.h
+files/include/asm-mips/danube/danube_cgu.h
+files/include/asm-mips/danube/danube_deu.h
+files/include/asm-mips/danube/danube_deu_structs.h
+files/include/asm-mips/danube/danube_dma.h
+files/include/asm-mips/danube/danube_eth2.h
+files/include/asm-mips/danube/danube_eth2_fw.h
+files/include/asm-mips/danube/danube_eth2_fw_with_dplus.h
+files/include/asm-mips/danube/danube_eth2_fw_with_dplus_sb.h
+files/include/asm-mips/danube/danube_eth_d2.h
+files/include/asm-mips/danube/danube_eth_fw_d2.h
+files/include/asm-mips/danube/danube_gpio.h
+files/include/asm-mips/danube/danube_gptu.h
+files/include/asm-mips/danube/danube_icu.h
+files/include/asm-mips/danube/danube_led.h
+files/include/asm-mips/danube/danube_mei.h
+files/include/asm-mips/danube/danube_mei_app.h
+files/include/asm-mips/danube/danube_mei_app_ioctl.h
+files/include/asm-mips/danube/danube_mei_bsp.h
+files/include/asm-mips/danube/danube_mei_ioctl.h
+files/include/asm-mips/danube/danube_mei_linux.h
+files/include/asm-mips/danube/danube_misc.h
+files/include/asm-mips/danube/danube_pmu.h
+files/include/asm-mips/danube/danube_ppa_api.h
+files/include/asm-mips/danube/danube_ppa_eth_fw_d2.h
+files/include/asm-mips/danube/danube_ppa_eth_fw_d3.h
+files/include/asm-mips/danube/danube_ppa_hook.h
+files/include/asm-mips/danube/danube_ppa_ppe_d3_hal.h
+files/include/asm-mips/danube/danube_ppa_ppe_hal.h
+files/include/asm-mips/danube/danube_ppa_stack_al.h
+files/include/asm-mips/danube/danube_ppe.h
+files/include/asm-mips/danube/danube_ppe_fw.h
+files/include/asm-mips/danube/danube_ppe_fw_fix_for_pci.h
+files/include/asm-mips/danube/danube_rcu.h
+files/include/asm-mips/danube/danube_sdio_controller.h
+files/include/asm-mips/danube/danube_sdio_controller_registers.h
+files/include/asm-mips/danube/danube_ssc.h
+files/include/asm-mips/danube/danube_sw.h
+files/include/asm-mips/danube/danube_wdt.h
+files/include/asm-mips/danube/danube_ws.h
+files/include/asm-mips/danube/emulation.h
+files/include/asm-mips/danube/ifx_mps.h
+files/include/asm-mips/danube/ifx_peripheral_definitions.h
+files/include/asm-mips/danube/ifx_sd_card.h
+files/include/asm-mips/danube/ifx_serial.h
+files/include/asm-mips/danube/ifx_ssc.h
+files/include/asm-mips/danube/ifx_ssc_defines.h
+files/include/asm-mips/danube/ifx_types.h
+files/include/asm-mips/danube/infineon_sdio.h
+files/include/asm-mips/danube/infineon_sdio_card.h
+files/include/asm-mips/danube/infineon_sdio_cmds.h
+files/include/asm-mips/danube/infineon_sdio_controller.h
+files/include/asm-mips/danube/irq.h
+files/include/asm-mips/danube/memcopy.h
+files/include/asm-mips/danube/mps.h
+files/include/asm-mips/danube/port.h
+files/include/asm-mips/danube/ppe.h
+files/include/asm-mips/danube/serial.h
+files/include/asm-mips/mach-danube/irq.h
+image/Makefile
+patches/100-board.patch
+patches/110-drivers.patch
projects / openwrt / staging / florian.git / commitdiff