ipq806x: switch AP148 to using SMEM based MTD parser

*Enable SMEM MTD parser and its dependencies (SMEM & HW spinlocks) in
 the kernel config
*Replaces the MTD layout in DT by the dynamic layout provided by the
 SMEM parser for AP148

Using the OF based parser is still possible on platforms which have a
fixed MTD partition layout.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 46658

diff --git a/target/linux/ipq806x/config-3.18 b/target/linux/ipq806x/config-3.18
index 2a837f5282f6d2467827e479da0c57bbd2b658ad..3d4f8bb2c1f91b1485a661d919e3c2e81c61f4c0 100644 (file)
--- a/target/linux/ipq806x/config-3.18
+++ b/target/linux/ipq806x/config-3.18
@@ -206,6 +206,8 @@ CONFIG_HIGHMEM=y
 CONFIG_HIGHPTE=y
 CONFIG_HOTPLUG_CPU=y
 CONFIG_HWMON=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_MSM=y
 CONFIG_HZ_FIXED=0
@@ -259,6 +261,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_QCOM_SMEM_PARTS=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_FIT_FW=y
@@ -345,6 +348,7 @@ CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_WDT=y
 CONFIG_RAS=y
 # CONFIG_RCU_BOOST is not set

diff --git a/target/linux/ipq806x/config-4.1 b/target/linux/ipq806x/config-4.1
index f711dd5a126055c1dc8da3960f5bb2789183c0e8..d48943c11c69a31dda5564de181ac044fd122469 100644 (file)
--- a/target/linux/ipq806x/config-4.1
+++ b/target/linux/ipq806x/config-4.1
@@ -45,7 +45,6 @@ CONFIG_ARM_CCI400_PMU=y
 CONFIG_ARM_CPU_SUSPEND=y
 CONFIG_ARM_GIC=y
 CONFIG_ARM_HAS_SG_CHAIN=y
-# CONFIG_ARM_KIRKWOOD_CPUFREQ is not set
 CONFIG_ARM_L1_CACHE_SHIFT=6
 CONFIG_ARM_L1_CACHE_SHIFT_6=y
 # CONFIG_ARM_LPAE is not set
@@ -214,6 +213,8 @@ CONFIG_HIGHPTE=y
 CONFIG_HOTPLUG_CPU=y
 # CONFIG_HSU_DMA_PCI is not set
 CONFIG_HWMON=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_QCOM=y
 CONFIG_HW_RANDOM=y
 CONFIG_HW_RANDOM_MSM=y
 CONFIG_HZ_FIXED=0
@@ -240,7 +241,6 @@ CONFIG_KPSS_XCC=y
 CONFIG_KRAITCC=y
 CONFIG_KRAIT_CLOCKS=y
 CONFIG_KRAIT_L2_ACCESSORS=y
-# CONFIG_LEDS_REGULATOR is not set
 CONFIG_LIBFDT=y
 CONFIG_LOCKUP_DETECTOR=y
 CONFIG_LOCK_SPIN_ON_OWNER=y
@@ -268,6 +268,7 @@ CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_ECC=y
 CONFIG_MTD_NAND_QCOM=y
+CONFIG_MTD_QCOM_SMEM_PARTS=y
 CONFIG_MTD_SPI_NOR=y
 CONFIG_MTD_SPLIT_FIRMWARE=y
 CONFIG_MTD_SPLIT_FIT_FW=y
@@ -357,6 +358,7 @@ CONFIG_QCOM_BAM_DMA=y
 CONFIG_QCOM_GSBI=y
 CONFIG_QCOM_HFPLL=y
 CONFIG_QCOM_SCM=y
+CONFIG_QCOM_SMEM=y
 CONFIG_QCOM_WDT=y
 CONFIG_RAS=y
 # CONFIG_RCU_BOOST is not set
@@ -366,9 +368,7 @@ CONFIG_RD_GZIP=y
 CONFIG_REGMAP=y
 CONFIG_REGMAP_MMIO=y
 CONFIG_REGULATOR=y
-# CONFIG_REGULATOR_DEBUG is not set
 CONFIG_REGULATOR_QCOM_RPM=y
-# CONFIG_REGULATOR_USERSPACE_CONSUMER is not set
 CONFIG_RESET_CONTROLLER=y
 CONFIG_RFS_ACCEL=y
 CONFIG_RPS=y

diff --git a/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch b/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch
index 34eb9c0dfa0ef5fb3f76bb4e606c1b4431411dbc..bfdb30fe14a3f1c0e55da5972b20cb3625472279 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch
+++ b/target/linux/ipq806x/patches-3.18/021-add-ap148-partitions.patch
@@ -1,35 +1,19 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -78,13 +78,28 @@
+@@ -77,15 +77,7 @@
+                                       spi-max-frequency = <50000000>;
                                        reg = <0>;
  
-                                       partition@0 {
+-                                      partition@0 {
 -                                              label = "rootfs";
 -                                              reg = <0x0 0x1000000>;
-+                                              label = "lowlevel_init";
-+                                              reg = <0x0 0x1b0000>;
-                                       };
- 
-                                       partition@1 {
+-                                      };
+-
+-                                      partition@1 {
 -                                              label = "scratch";
 -                                              reg = <0x1000000 0x1000000>;
-+                                              label = "u-boot";
-+                                              reg = <0x1b0000 0x80000>;
-+                                      };
-+
-+                                      partition@2 {
-+                                              label = "u-boot-env";
-+                                              reg = <0x230000 0x40000>;
-+                                      };
-+
-+                                      partition@3 {
-+                                              label = "caldata";
-+                                              reg = <0x270000 0x40000>;
-+                                      };
-+
-+                                      partition@4 {
-+                                              label = "firmware";
-+                                              reg = <0x2b0000 0x1d50000>;
-                                       };
+-                                      };
++                                      linux,part-probe = "qcom-smem";
                                };
                        };
+               };

diff --git a/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
index c32261657b81053bee63ebf91dba3df5b1a7d21a..e2d03d4ffd26e88db033921116687785c3312c66 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
+++ b/target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -114,5 +114,29 @@
+@@ -91,5 +91,29 @@
                sata@29000000 {
                        status = "ok";
                };

diff --git a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
index 4c185668b61e3cdd9667743f2981c6ec7b3c4849..d15f0ac05e7531de7fef097e74638d2e8356edf8 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
@@ -40,7 +40,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -138,5 +156,19 @@
+@@ -115,5 +133,19 @@
                usb30@1 {
                        status = "ok";
                };

diff --git a/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
index 77be8862e9b1925ef3456fc944f3db92f86a575f..d62564ce30e707ce8345b9ce15a35a67a8620fa2 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
+++ b/target/linux/ipq806x/patches-3.18/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
@@ -57,7 +57,7 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
                };
  
                gsbi@16300000 {
-@@ -170,5 +195,19 @@
+@@ -147,5 +172,19 @@
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
                };

diff --git a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
index da8286acc2491177e108de7f11e2a2a11a2110f1..a4a6a608acdcebb1af0ac272957dc38c703c5392 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ b/target/linux/ipq806x/patches-3.18/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -205,6 +215,34 @@
+@@ -182,6 +192,34 @@
                        nand-ecc-strength = <4>;
                        nand-bus-width = <8>;
                };

diff --git a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
index 8e66b8d1204d03227ededefed419a73620800f4d..fda1b86bf60c2f82a6109ac97e2c55a5ec4c50c5 100644 (file)
--- a/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-3.18/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -243,6 +253,27 @@
+@@ -220,6 +230,27 @@
                                reg = <4>;
                        };
                };

diff --git a/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch b/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch
index 34eb9c0dfa0ef5fb3f76bb4e606c1b4431411dbc..bfdb30fe14a3f1c0e55da5972b20cb3625472279 100644 (file)
--- a/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch
+++ b/target/linux/ipq806x/patches-4.1/021-add-ap148-partitions.patch
@@ -1,35 +1,19 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -78,13 +78,28 @@
+@@ -77,15 +77,7 @@
+                                       spi-max-frequency = <50000000>;
                                        reg = <0>;
  
-                                       partition@0 {
+-                                      partition@0 {
 -                                              label = "rootfs";
 -                                              reg = <0x0 0x1000000>;
-+                                              label = "lowlevel_init";
-+                                              reg = <0x0 0x1b0000>;
-                                       };
- 
-                                       partition@1 {
+-                                      };
+-
+-                                      partition@1 {
 -                                              label = "scratch";
 -                                              reg = <0x1000000 0x1000000>;
-+                                              label = "u-boot";
-+                                              reg = <0x1b0000 0x80000>;
-+                                      };
-+
-+                                      partition@2 {
-+                                              label = "u-boot-env";
-+                                              reg = <0x230000 0x40000>;
-+                                      };
-+
-+                                      partition@3 {
-+                                              label = "caldata";
-+                                              reg = <0x270000 0x40000>;
-+                                      };
-+
-+                                      partition@4 {
-+                                              label = "firmware";
-+                                              reg = <0x2b0000 0x1d50000>;
-                                       };
+-                                      };
++                                      linux,part-probe = "qcom-smem";
                                };
                        };
+               };

diff --git a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
index f53b23dfe84dab45fbae20e61164508c7328a0c3..77cf3c3beb24deb92045c1b458c244bb8e915321 100644 (file)
--- a/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.1/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
@@ -40,7 +40,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -114,5 +132,19 @@
+@@ -91,5 +109,19 @@
                sata@29000000 {
                        status = "ok";
                };

diff --git a/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch b/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
index 88327562165a535500050b75297cd8fa4f1aba5e..415bf301321ff97f8eb45d379c399c5cfdff5c45 100644 (file)
--- a/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
+++ b/target/linux/ipq806x/patches-4.1/165-arm-qcom-dts-Enable-NAND-node-on-IPQ8064-AP148-platform.patch
@@ -54,7 +54,7 @@ arch/arm/boot/dts/qcom-ipq8064-ap148.dts | 36 ++++++++++++++++++++++++++++++++
                };
  
                gsbi@16300000 {
-@@ -146,5 +168,19 @@
+@@ -123,5 +145,19 @@
                        pinctrl-0 = <&pcie1_pins>;
                        pinctrl-names = "default";
                };

diff --git a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
index 940f0317d91f572abe68eae5cf1cd6f653a273dd..394f378981f6361da3fbedd3592fcb252cdbfb4a 100644 (file)
--- a/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
+++ b/target/linux/ipq806x/patches-4.1/707-ARM-dts-qcom-add-mdio-nodes-to-ap148-db149.patch
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -178,6 +188,34 @@
+@@ -155,6 +165,34 @@
                        nand-ecc-strength = <4>;
                        nand-bus-width = <8>;
                };

diff --git a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
index 87a37288a8d58bb1fb6a6b9430903571c1a53b60..9b7eacbb4b980baa121ef36639f4afa8601dcc22 100644 (file)
--- a/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
+++ b/target/linux/ipq806x/patches-4.1/708-ARM-dts-qcom-add-gmac-nodes-to-ipq806x-platforms.patch
@@ -29,7 +29,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                };
  
                gsbi@16300000 {
-@@ -216,6 +226,27 @@
+@@ -193,6 +203,27 @@
                                reg = <4>;
                        };
                };