Iomega iConnect Wireless platform support
authorLars-Peter Clausen <lars@metafoo.de>
Mon, 4 Oct 2010 09:19:52 +0000 (09:19 +0000)
committerLars-Peter Clausen <lars@metafoo.de>
Mon, 4 Oct 2010 09:19:52 +0000 (09:19 +0000)
This patch adds support for Iomega iConnect Wireless. Leds and wireless card
support are still missing.

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@neratec.com>
SVN-Revision: 23217

target/linux/kirkwood/config-default
target/linux/kirkwood/patches/200-iconnect.patch [new file with mode: 0644]
target/linux/kirkwood/profiles/300-Iconnect.mk [new file with mode: 0644]

index 7897f7cc3f7f77b3dfd37b9be4f0c5ea4dedc33f..0f33463978447530faf95a01a774068cc832f473 100644 (file)
@@ -90,6 +90,7 @@ CONFIG_LEGACY_PTY_COUNT=256
 CONFIG_MACH_DOCKSTAR=y
 # CONFIG_MACH_ESATA_SHEEVAPLUG is not set
 # CONFIG_MACH_GURUPLUG is not set
+CONFIG_MACH_ICONNECT=y
 # CONFIG_MACH_INETSPACE_V2 is not set
 # CONFIG_MACH_MV88F6281GTW_GE is not set
 # CONFIG_MACH_NET2BIG_V2 is not set
diff --git a/target/linux/kirkwood/patches/200-iconnect.patch b/target/linux/kirkwood/patches/200-iconnect.patch
new file mode 100644 (file)
index 0000000..fd1e486
--- /dev/null
@@ -0,0 +1,123 @@
+--- a/arch/arm/mach-kirkwood/Makefile
++++ b/arch/arm/mach-kirkwood/Makefile
+@@ -8,6 +8,7 @@
+ obj-$(CONFIG_MACH_DOCKSTAR)           += dockstar-setup.o
+ obj-$(CONFIG_MACH_ESATA_SHEEVAPLUG)   += sheevaplug-setup.o
+ obj-$(CONFIG_MACH_GURUPLUG)           += guruplug-setup.o
++obj-$(CONFIG_MACH_ICONNECT)           += iconnect-setup.o
+ obj-$(CONFIG_MACH_TS219)              += ts219-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_TS41X)              += ts41x-setup.o tsx1x-common.o
+ obj-$(CONFIG_MACH_OPENRD)             += openrd-setup.o
+--- a/arch/arm/mach-kirkwood/Kconfig
++++ b/arch/arm/mach-kirkwood/Kconfig 
+@@ -105,6 +105,12 @@
+         Say 'Y' here if you want your kernel to support the
+         Seagate FreeAgent DockStar.
++config MACH_ICONNECT
++      bool "Iomega iConnect Wireless"
++      help
++        Say 'Y' here if you want your kernel to support the
++        Iomega iConnect Wireless.
++
+ endmenu
+ endif
+--- /dev/null 
++++ b/arch/arm/mach-kirkwood/iconnect-setup.c 
+@@ -0,0 +1,95 @@
++/*
++ * arch/arm/mach-kirkwood/iconnect-setup.c
++ *
++ * Iomega iConnect Wireless
++ *
++ * This file is licensed under the terms of the GNU General Public
++ * License version 2.  This program is licensed "as is" without any
++ * warranty of any kind, whether express or implied.
++ */
++
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/platform_device.h>
++#include <linux/irq.h>
++#include <linux/mtd/partitions.h>
++#include <linux/mv643xx_eth.h>
++#include <linux/ethtool.h>
++#include <asm/mach-types.h>
++#include <asm/mach/arch.h>
++#include <mach/kirkwood.h>
++#include "common.h"
++#include "mpp.h"
++
++static struct mtd_partition iconnect_nand_parts[] = {
++      {
++              .name = "u-boot",
++              .offset = 0,
++              .size = SZ_1M
++      }, {
++              .name = "uImage",
++              .offset = MTDPART_OFS_NXTBLK,
++              .size = SZ_1M + SZ_2M
++      }, {
++              .name = "rootfs",
++              .offset = MTDPART_OFS_NXTBLK,
++              .size = SZ_32M,
++      }, {
++              .name = "data",
++              .offset = MTDPART_OFS_NXTBLK,
++              .size = MTDPART_SIZ_FULL
++      },
++};
++
++static struct mv643xx_eth_platform_data iconnect_ge00_data = {
++      .phy_addr       = MV643XX_ETH_PHY_ADDR(11),
++};
++
++static unsigned int iconnect_mpp_config[] __initdata = {
++      MPP8_TW_SDA,
++      MPP9_TW_SCK,
++      MPP10_UART0_TXD,
++      MPP11_UART0_RXD,
++      MPP28_GPIO,
++      0
++};
++
++static void __init iconnect_init(void)
++{
++      u32 dev, rev;
++
++      /*
++       * Basic setup. Needs to be called early.
++       */
++      kirkwood_init();
++      kirkwood_mpp_conf(iconnect_mpp_config);
++
++      kirkwood_nand_init(ARRAY_AND_SIZE(iconnect_nand_parts), 25);
++      kirkwood_ehci_init();
++
++      kirkwood_ge00_init(&iconnect_ge00_data);
++      kirkwood_pcie_id(&dev, &rev);
++
++      kirkwood_uart0_init();
++      kirkwood_i2c_init();
++}
++
++static int __init iconnect_pci_init(void)
++{
++      if (machine_is_iconnect())
++              kirkwood_pcie_init();
++
++      return 0;
++}
++subsys_initcall(iconnect_pci_init);
++
++
++MACHINE_START(ICONNECT, "Iomega iConnect Wireless")
++      .phys_io        = KIRKWOOD_REGS_PHYS_BASE,
++      .io_pg_offst    = ((KIRKWOOD_REGS_VIRT_BASE) >> 18) & 0xfffc,
++      .boot_params    = 0x00000100,
++      .init_machine   = iconnect_init,
++      .map_io         = kirkwood_map_io,
++      .init_irq       = kirkwood_init_irq,
++      .timer          = &kirkwood_timer,
++MACHINE_END
diff --git a/target/linux/kirkwood/profiles/300-Iconnect.mk b/target/linux/kirkwood/profiles/300-Iconnect.mk
new file mode 100644 (file)
index 0000000..230e419
--- /dev/null
@@ -0,0 +1,17 @@
+#
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+define Profile/Iconnect
+  NAME:=Iomega iConnect Wireless
+  PACKAGES:=kmod-i2c-mv64xxx kmod-hwmon-core kmod-hwmon-lm63
+endef
+
+define Profile/Iconnect/Description
+        Iomega iConnect Wireless
+endef
+
+$(eval $(call Profile,Iconnect))