ipq806x: disable i2c device on gsbi4
authorJohn Crispin <john@openwrt.org>
Sat, 23 May 2015 15:27:45 +0000 (15:27 +0000)
committerJohn Crispin <john@openwrt.org>
Sat, 23 May 2015 15:27:45 +0000 (15:27 +0000)
Patch cherry-picked from the following location:
https://chromium-review.googlesource.com/#/c/269931/

Disable the i2c device on gsbi4 and mark gsbi4_h and gsbi4_qup clks as
unused. If they are enabled, clock framework will turn them off at end
of probe. On ipq806x by design gsbi4_qup, gsbi4_h clks and i2c on gsbi4
are meant for RPM usage. So turning them off in kernel is incorrect.

Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
SVN-Revision: 45728

target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch [new file with mode: 0644]
target/linux/ipq806x/patches-3.18/101-ARM-qcom-add-USB-nodes-to-ipq806x-ap148.patch
target/linux/ipq806x/patches-3.18/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
target/linux/ipq806x/patches-3.18/700-add-gmac-dts-suport.patch
target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch [new file with mode: 0644]
target/linux/ipq806x/patches-4.0/112-ARM-dts-qcom-add-pcie-nodes-to-ipq806x-platforms.patch
target/linux/ipq806x/patches-4.0/700-add-gmac-dts-suport.patch

diff --git a/target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-3.18/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
new file mode 100644 (file)
index 0000000..319859b
--- /dev/null
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -46,15 +46,12 @@
+                       serial@16340000 {
+                               status = "ok";
+                       };
+-
+-                      i2c4: i2c@16380000 {
+-                              status = "ok";
+-
+-                              clock-frequency = <200000>;
+-
+-                              pinctrl-0 = <&i2c4_pins>;
+-                              pinctrl-names = "default";
+-                      };
++                      /*
++                       * The i2c device on gsbi4 should not be enabled.
++                       * On ipq806x designs gsbi4 i2c is meant for exclusive
++                       * RPM usage. Turning this on in kernel manifests as
++                       * i2c failure for the RPM.
++                       */
+               };
+               gsbi5: gsbi@1a200000 {
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -794,7 +794,7 @@ static struct clk_rcg gsbi7_qup_src = {
+                       .parent_names = gcc_pxo_pll8,
+                       .num_parents = 2,
+                       .ops = &clk_rcg_ops,
+-                      .flags = CLK_SET_PARENT_GATE,
++                      .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
+@@ -810,7 +810,7 @@ static struct clk_branch gsbi7_qup_clk =
+                       .parent_names = (const char *[]){ "gsbi7_qup_src" },
+                       .num_parents = 1,
+                       .ops = &clk_branch_ops,
+-                      .flags = CLK_SET_RATE_PARENT,
++                      .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
+@@ -858,7 +858,7 @@ static struct clk_branch gsbi4_h_clk = {
+               .hw.init = &(struct clk_init_data){
+                       .name = "gsbi4_h_clk",
+                       .ops = &clk_branch_ops,
+-                      .flags = CLK_IS_ROOT,
++                      .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
index f1b41648a3d12226a73e47f2c95ae5573d364e01..8f17397380e4ccf4c3c851bce353ca8a5235f1e5 100644 (file)
@@ -1,6 +1,6 @@
 --- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
 +++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
-@@ -112,5 +112,29 @@
+@@ -109,5 +109,29 @@
                sata@29000000 {
                        status = "ok";
                };
index 2613dff4df5ebe6ea39af14a1fe5685b0dca2d66..3c1ae617fe473a927e4f2c81e2a248c9fc99ba6e 100644 (file)
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -136,5 +152,19 @@
+@@ -133,5 +149,19 @@
                usb30@1 {
                        status = "ok";
                };
index fe670cf99e52e686ff811a3e73df210385c13b82..4e8f8591f98d396ca992505a4b5e99e3848451bb 100644 (file)
@@ -42,7 +42,7 @@
                };
  
                gsbi@16300000 {
-@@ -92,6 +118,7 @@
+@@ -89,6 +115,7 @@
                                        #size-cells = <1>;
                                        spi-max-frequency = <50000000>;
                                        reg = <0>;
@@ -50,7 +50,7 @@
  
                                        partition@0 {
                                                label = "lowlevel_init";
-@@ -166,5 +193,66 @@
+@@ -163,5 +190,66 @@
                        pinctrl-0 = <&pcie2_pins>;
                        pinctrl-names = "default";
                };
diff --git a/target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch b/target/linux/ipq806x/patches-4.0/023-ARM-dts-ipq806x-Disable-i2c-device-on-gsbi4.patch
new file mode 100644 (file)
index 0000000..75595ca
--- /dev/null
@@ -0,0 +1,53 @@
+--- a/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
++++ b/arch/arm/boot/dts/qcom-ipq8064-ap148.dts
+@@ -46,15 +46,12 @@
+                       serial@16340000 {
+                               status = "ok";
+                       };
+-
+-                      i2c4: i2c@16380000 {
+-                              status = "ok";
+-
+-                              clock-frequency = <200000>;
+-
+-                              pinctrl-0 = <&i2c4_pins>;
+-                              pinctrl-names = "default";
+-                      };
++                      /*
++                       * The i2c device on gsbi4 should not be enabled.
++                       * On ipq806x designs gsbi4 i2c is meant for exclusive
++                       * RPM usage. Turning this on in kernel manifests as
++                       * i2c failure for the RPM.
++                       */
+               };
+               gsbi5: gsbi@1a200000 {
+--- a/drivers/clk/qcom/gcc-ipq806x.c
++++ b/drivers/clk/qcom/gcc-ipq806x.c
+@@ -805,7 +805,7 @@ static struct clk_rcg gsbi7_qup_src = {
+                       .parent_names = gcc_pxo_pll8,
+                       .num_parents = 2,
+                       .ops = &clk_rcg_ops,
+-                      .flags = CLK_SET_PARENT_GATE,
++                      .flags = CLK_SET_PARENT_GATE | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
+@@ -821,7 +821,7 @@ static struct clk_branch gsbi7_qup_clk =
+                       .parent_names = (const char *[]){ "gsbi7_qup_src" },
+                       .num_parents = 1,
+                       .ops = &clk_branch_ops,
+-                      .flags = CLK_SET_RATE_PARENT,
++                      .flags = CLK_SET_RATE_PARENT | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
+@@ -869,7 +869,7 @@ static struct clk_branch gsbi4_h_clk = {
+               .hw.init = &(struct clk_init_data){
+                       .name = "gsbi4_h_clk",
+                       .ops = &clk_branch_ops,
+-                      .flags = CLK_IS_ROOT,
++                      .flags = CLK_IS_ROOT | CLK_IGNORE_UNUSED,
+               },
+       },
+ };
index 593bc327907ddbda62dfa8811597966380ade9a3..90095758f219e9817c39f9db5de5a1d74fb23d88 100644 (file)
@@ -38,7 +38,7 @@ Signed-off-by: Mathieu Olivari <mathieu@codeaurora.org>
                        spi_pins: spi_pins {
                                mux {
                                        pins = "gpio18", "gpio19", "gpio21";
-@@ -112,5 +128,19 @@
+@@ -109,5 +125,19 @@
                sata@29000000 {
                        status = "ok";
                };
index 16defd135d9c4a714bed46d574d3a503ac3d63dd..b5643dfd17ffb3a18f30f9326f492bfb587d9698 100644 (file)
@@ -42,7 +42,7 @@
                };
  
                gsbi@16300000 {
-@@ -92,6 +118,7 @@
+@@ -89,6 +115,7 @@
                                        #size-cells = <1>;
                                        spi-max-frequency = <50000000>;
                                        reg = <0>;
@@ -50,7 +50,7 @@
  
                                        partition@0 {
                                                label = "lowlevel_init";
-@@ -142,5 +169,66 @@
+@@ -139,5 +166,66 @@
                        pinctrl-0 = <&pcie2_pins>;
                        pinctrl-names = "default";
                };