openwrt/target/linux/package/base-files/files/brcm-2.6/etc/init.d/S05netconfig

   1 #!/bin/sh
   2 [ -e /etc/config/network ] && exit 0
   3
   4 (
   5         mkdir -p /etc/config
   6         if [ "$(/usr/bin/head -c4 /dev/mtdblock/1 | /usr/bin/tail -c3)" = "ELF" ]; then
   7                 # WGT634u
   8                 echo boardtype=wgt634u
   9         else
  10                 strings /dev/mtdblock/3
  11         fi
  12 ) | awk '
  13 function p(name) {
  14         if (c[name] != "") print name "=\"" c[name] "\""
  15 }
  16
  17 BEGIN {
  18         FS="="
  19         c["lan_ifname"]="br0"
  20         c["lan_ifnames"]="vlan0 eth1"
  21         c["wan_proto"]="none"
  22         c["wan_ifname"]="vlan1"
  23         c["vlan0ports"]="1 2 3 4 5*"
  24         c["vlan1ports"]="0 5"
  25 }
  26
  27 ($1 == "boardnum") || ($1 == "boardtype") || ($1 == "boardflags") {
  28         nvram[$1] = $2
  29 }
  30
  31 END {
  32         # v1 hardware
  33         if (nvram["boardtype"] == "bcm4710dev") {
  34                 # Linksys WRT54G v1.x
  35                 if (nvram["boardnum"] == "42") {
  36                         c["vlan0ports"]=""
  37                         c["vlan1ports"]=""
  38                         c["lan_ifnames"]="vlan2 eth2"
  39                 }
  40
  41                 # Asus WL-500g
  42                 if (nvram["boardnum"] == "asusX") {
  43                         c["lan_ifnames"]="eth0 eth1 eth2" # FIXME
  44                         # wan_ifname=eth1
  45                 }
  46         }
  47         if (nvram["boardtype"] == "wgt634u") {
  48                 c["vlan0ports"] = "0 1 2 3 5*"
  49                 c["vlan1ports"] = "4 5"
  50         }
  51         if (nvram["boardtype"] == "0x0467") {
  52                 c["vlan0ports"] = "0 1 2 3 5*"
  53                 c["vlan1ports"] = "4 5"
  54         }
  55
  56         # WAP54G
  57         if ((nvram["boardnum"] == "2") || \
  58                 (nvram["boardnum"] == "1024")) {
  59                 c["lan_ifnames"]="eth0 eth1"
  60                 c["wan_ifname"]=""
  61         }
  62
  63         print "#### VLAN configuration "
  64         print "vlan0hwname=et0"
  65         print "vlan1hwname=et0"
  66         p("vlan0ports")
  67         p("vlan1ports")
  68         print ""
  69         print ""
  70
  71         print "#### LAN configuration"
  72         print "lan_proto=\"static\""
  73         p("lan_ifname")
  74         p("lan_ifnames")
  75         print "lan_ipaddr=\"192.168.1.1\""
  76         print "# lan_dns=\"192.168.1.1\""
  77         print "# lan_gateway=\"192.168.1.1\""
  78
  79         print ""
  80         print ""
  81
  82         print "#### WAN configuration"
  83         print "# wan_proto: WAN protocol, available protocols:"
  84         print "#   none: disable"
  85         print "#   dhcp: DHCP"
  86         print "#   static: Static IP"
  87         print "#   pppoe: PPP over Ethernet"
  88         print "#   pptp: Point-to-Point tunneling Protocol"
  89         print "#     for pppoe and pptp you need to use wan_ifname=\"ppp0\""
  90         print "#     and {pppoe,pptp}ifname=\"" c["wan_ifname"] "\")"
  91         print ""
  92         print "wan_proto=dhcp"
  93         p("wan_ifname")
  94         print "# wan_ipaddr=\"192.168.0.2\""
  95         print "# wan_netmask=\"255.255.255.0\""
  96         print "# wan_gateway=\"192.168.0.1\""
  97         print "# wan_dns=\"192.168.0.1\""
  98         print ""
  99         print "## PPP over Ethernet and PPTP"
 100         print "# wan_ifname=\"ppp0\""
 101         print "# pppoe_ifname=\"" c["wan_ifname"] "\""
 102         print "# pptp_ifname=\"" c["wan_ifname"] "\""
 103         print "# pptp_server_ip=\"192.168.0.1\""
 104 }
 105 ' > /etc/config/network