target/linux/ath79/dts/qca9531_engenius_ews511ap.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca953x.dtsi"
   8
   9 / {
  10         compatible = "engenius,ews511ap", "qca,qca9531";
  11         model = "EnGenius EWS511AP";
  12
  13         keys {
  14                 compatible = "gpio-keys-polled";
  15
  16                 poll-interval = <20>;
  17                 pinctrl-names = "default";
  18                 pinctrl-0 = <&jtag_disable_pins>;
  19
  20                 reset {
  21                         label = "reset";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
  24                 };
  25         };
  26
  27         aliases {
  28                 led-boot = &power_led;
  29                 led-failsafe = &power_led;
  30                 led-running = &power_led;
  31                 led-upgrade = &power_led;
  32         };
  33
  34         leds {
  35                 compatible = "gpio-leds";
  36
  37                 power_led: power {
  38                         label = "ews511ap:amber:power";
  39                         gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
  40                         default-state = "on";
  41                 };
  42
  43                 lan1 {
  44                         label = "ews511ap:blue:lan1";
  45                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  46                 };
  47
  48                 lan2 {
  49                         label = "ews511ap:blue:lan2";
  50                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  51                 };
  52
  53                 wlan2g {
  54                         label = "ews511ap:green:wlan2g";
  55                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  56                         linux,default-trigger = "phy0tpt";
  57                 };
  58
  59                 wlan5g {
  60                         label = "ews511ap:green:wlan5g";
  61                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  62                         linux,default-trigger = "phy1tpt";
  63                 };
  64         };
  65
  66         watchdog {
  67                 compatible = "linux,wdt-gpio";
  68
  69                 gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
  70                 hw_algo = "toggle";
  71                 /* hw_margin_ms is actually 300s but driver limits it to 60s */
  72                 hw_margin_ms = <60000>;
  73                 always-running;
  74         };
  75 };
  76
  77 &wdt {
  78         status = "okay";
  79 };
  80
  81 &rst {
  82         status = "okay";
  83 };
  84
  85 &pcie0 {
  86         status = "okay";
  87 };
  88
  89 &uart {
  90         status = "okay";
  91 };
  92
  93 &spi {
  94         status = "okay";
  95         num-cs = <0>;
  96
  97         flash@0 {
  98                 compatible = "jedec,spi-nor";
  99                 reg = <0>;
 100                 spi-max-frequency = <25000000>;
 101
 102                 partitions {
 103                         compatible = "fixed-partitions";
 104                         #address-cells = <1>;
 105                         #size-cells = <1>;
 106
 107                         partition@0 {
 108                                 label = "u-boot";
 109                                 reg = <0x000000 0x040000>;
 110                                 read-only;
 111                         };
 112
 113                         ubootenv: partition@40000 {
 114                                 label = "u-boot-env";
 115                                 reg = <0x040000 0x010000>;
 116                         };
 117
 118                         art: partition@50000 {
 119                                 label = "art";
 120                                 reg = <0x050000 0x010000>;
 121                         };
 122
 123                         partition@60000 {
 124                                 compatible = "denx,uimage";
 125                                 label = "firmware";
 126                                 reg = <0x060000 0xfa0000>;
 127                         };
 128                 };
 129         };
 130 };
 131
 132 &eth0 {
 133         status = "okay";
 134         phy-handle = <&swphy4>;
 135 };
 136
 137 &eth1 {
 138         status = "okay";
 139 };
 140
 141 &wmac {
 142         status = "okay";
 143         mtd-cal-data = <&art 0x1000>;
 144 };