target/linux/ath79/dts/qca9531_glinet_ar300m-nand.dts

   1 /dts-v1/;
   2
   3 #include "qca9531_glinet_ar300m.dtsi"
   4
   5 / {
   6         compatible = "glinet,ar300m-nand", "qca,qca9531";
   7         model = "GL.iNet GL-AR300M (NAND)";
   8 };
   9
  10 &spi {
  11         status = "okay";
  12         num-cs = <1>;
  13
  14         flash@0 {
  15                 compatible = "winbond,w25q128", "jedec,spi-nor";
  16                 reg = <0>;
  17                 spi-max-frequency = <25000000>;
  18
  19                 partitions {
  20                         compatible = "fixed-partitions";
  21                         #address-cells = <1>;
  22                         #size-cells = <1>;
  23
  24                         partition@0 {
  25                                 label = "u-boot";
  26                                 reg = <0x000000 0x040000>;
  27                                 read-only;
  28                         };
  29
  30                         partition@1 {
  31                                 label = "u-boot-env";
  32                                 reg = <0x040000 0x010000>;
  33                         };
  34
  35                         partition@2 {
  36                                 label = "reserved";
  37                                 reg = <0x050000 0xfa0000>;
  38                         };
  39
  40                         art: partition@3 {
  41                                 label = "art";
  42                                 reg = <0xff0000 0x010000>;
  43                         };
  44                 };
  45         };
  46
  47         flash@1 {
  48                 compatible = "spinand,mt29f";
  49                 reg = <1>;
  50                 spi-max-frequency = <25000000>;
  51
  52                 partitions {
  53                         compatible = "fixed-partitions";
  54                         #address-cells = <1>;
  55                         #size-cells = <1>;
  56
  57                         partition@0 {
  58                                 label = "kernel";
  59                                 reg = <0x000000 0x0200000>;
  60                         };
  61
  62                         partition@1 {
  63                                 label = "ubi";
  64                                 reg = <0x200000 0x7e00000>;
  65                         };
  66                 };
  67         };
  68 };