target/linux/ath79/dts/qca9533_glinet_ar300m.dtsi

   1 /dts-v1/;
   2
   3 #include <dt-bindings/gpio/gpio.h>
   4 #include <dt-bindings/input/input.h>
   5
   6 #include "qca9533.dtsi"
   7
   8 / {
   9         compatible = "glinet,ar300m", "qca,qca9533";
  10         model = "GL.iNet GL-AR300M";
  11
  12         keys {
  13                 compatible = "gpio-keys-polled";
  14                 #address-cells = <1>;
  15                 #size-cells = <0>;
  16                 poll-interval = <20>;
  17                 pinctrl-names = "default";
  18                 pinctrl-0 = <&jtag_disable_pins>;
  19
  20                 button@0 {
  21                         label = "reset";
  22                         linux,code = <KEY_RESTART>;
  23                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  24                 };
  25
  26                 button@1 {
  27                         label = "button right";
  28                         linux,code = <BTN_0>;
  29                         gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
  30                 };
  31
  32                 button@3 {
  33                         label = "button left";
  34                         linux,code = <BTN_1>;
  35                         gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
  36                 };
  37         };
  38
  39         leds {
  40                 compatible = "gpio-leds";
  41
  42                 usb {
  43                         label = "gl-ar300m:green:usb";
  44                         gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
  45                         trigger-sources = <&hub_port>;
  46                         linux,default-trigger = "usbport";
  47                 };
  48
  49                 wlan {
  50                         label = "gl-ar300m:green:wlan";
  51                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  52                         linux,default-trigger = "phy0tpt";
  53                 };
  54
  55                 lan {
  56                         label = "gl-ar300m:green:lan";
  57                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  58                 };
  59
  60                 status {
  61                         label = "gl-ar300m:green:status";
  62                         gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
  63                 };
  64         };
  65 };
  66
  67 &pcie0 {
  68         status = "okay";
  69 };
  70
  71 &uart {
  72         status = "okay";
  73 };
  74
  75 &usb0 {
  76         status = "okay";
  77
  78         hub_port: port@1 {
  79                 reg = <1>;
  80                 #trigger-soruce-cells = <0>;
  81         };
  82 };
  83
  84 &usb_phy {
  85         status = "okay";
  86 };
  87
  88 &mdio0 {
  89         status = "okay";
  90
  91         phy4: ethernet-phy@4 {
  92                 reg = <4>;
  93                 phy-mode = "mii";
  94         };
  95 };
  96
  97 &mdio1 {
  98         status = "okay";
  99 };
 100
 101 &eth0 {
 102         status = "okay";
 103
 104         mtd-mac-address = <&art 0x0>;
 105         phy-handle = <&phy4>;
 106         phy-mode = "mii";
 107 };
 108
 109 &eth1 {
 110         status = "okay";
 111
 112         mtd-mac-address = <&art 0x6>;
 113         phy-mode = "gmii";
 114
 115         fixed-link {
 116                 speed = <1000>;
 117                 full-duplex;
 118         };
 119 };
 120
 121 &wmac {
 122         status = "okay";
 123         mtd-cal-data = <&art 0x1000>;
 124         mtd-mac-address = <&art 0x1002>;
 125 };