target/linux/bcm63xx/dts/bcm6318.dtsi

   1 /dts-v1/;
   2
   3 / {
   4         #address-cells = <1>;
   5         #size-cells = <1>;
   6         compatible = "brcm,bcm6318";
   7
   8         aliases {
   9                 pinctrl = &pinctrl;
  10                 serial0 = &uart0;
  11                 spi1 = &hsspi;
  12         };
  13
  14         cpus {
  15                 #address-cells = <1>;
  16                 #size-cells = <0>;
  17
  18                 cpu@0 {
  19                         compatible = "brcm,bmips3300", "mips,mips4Kc";
  20                         device_type = "cpu";
  21                         reg = <0>;
  22                 };
  23         };
  24
  25         cpu_intc: interrupt-controller {
  26                 #address-cells = <0>;
  27                 compatible = "mti,cpu-interrupt-controller";
  28
  29                 interrupt-controller;
  30                 #interrupt-cells = <1>;
  31         };
  32
  33         memory { device_type = "memory"; reg = <0 0>; };
  34
  35         ubus@10000000 {
  36                 #address-cells = <1>;
  37                 #size-cells = <1>;
  38                 ranges;
  39                 compatible = "simple-bus";
  40                 interrupt-parent = <&periph_intc>;
  41
  42                 ext_intc: interrupt-controller@10000018 {
  43                         compatible = "brcm,bcm6318-ext-intc";
  44                         reg = <0x10000018 0x4>;
  45
  46                         interrupt-controller;
  47                         #interrupt-cells = <2>;
  48
  49                         interrupts = <24>, <25>, <26>, <27>;
  50                 };
  51
  52                 periph_intc: interrupt-controller@10000020 {
  53                         compatible = "brcm,bcm6345-l1-intc";
  54                         reg = <0x10000020 0x20>;
  55
  56                         interrupt-controller;
  57                         #interrupt-cells = <1>;
  58
  59                         interrupt-parent = <&cpu_intc>;
  60                         interrupts = <2>;
  61                 };
  62
  63                 pinctrl: pin-controller@10000080 {
  64                         compatible = "brcm,bcm6318-pinctrl";
  65                         reg = <0x10000080 0x08>,
  66                               <0x10000088 0x08>,
  67                               <0x10000098 0x04>,
  68                               <0x1000009c 0x0c>,
  69                               <0x100000d4 0x18>;
  70                         reg-names = "dirout", "dat", "mode", "mux", "pad";
  71
  72                         gpio-controller;
  73                         #gpio-cells = <2>;
  74
  75                         interrupt-parent = <&ext_intc>;
  76                         interrupts = <0 0>, <1 0>;
  77                         interrupt-names = "gpio33", "gpio34";
  78
  79                         pinctrl_ephy0_spd_led: ephy0_spd_led {
  80                                 function = "ephy0_spd_led";
  81                                 pins = "gpio0";
  82                         };
  83
  84                         pinctrl_ephy1_spd_led: ephy1_spd_led {
  85                                 function = "ephy1_spd_led";
  86                                 pins = "gpio1";
  87                         };
  88
  89                         pinctrl_ephy2_spd_led: ephy2_spd_led {
  90                                 function = "ephy2_spd_led";
  91                                 pins = "gpio2";
  92                         };
  93
  94                         pinctrl_ephy3_spd_led: ephy3_spd_led {
  95                                 function = "ephy3_spd_led";
  96                                 pins = "gpio3";
  97                         };
  98
  99                         pinctrl_ephy0_act_led: ephy0_act_led {
 100                                 function = "ephy0_act_led";
 101                                 pins = "gpio4";
 102                         };
 103
 104                         pinctrl_ephy1_act_led: ephy1_act_led {
 105                                 function = "ephy1_act_led";
 106                                 pins = "gpio5";
 107                         };
 108
 109                         pinctrl_ephy2_act_led: ephy2_act_led {
 110                                 function = "ephy2_act_led";
 111                                 pins = "gpio6";
 112                         };
 113
 114                         pinctrl_ephy3_act_led: ephy3_act_led {
 115                                 function = "ephy3_act_led";
 116                                 pins = "gpio7";
 117                         };
 118
 119                         pinctrl_serial_led: serial_led {
 120                                 pinctrl_serial_led_data: serial_led_data {
 121                                         function = "serial_led_data";
 122                                         pins = "gpio6";
 123                                 };
 124
 125                                 pinctrl_serial_led_clk: serial_led_clk {
 126                                         function = "serial_led_clk";
 127                                         pins = "gpio7";
 128                                 };
 129                         };
 130
 131                         pinctrl_inet_act_led: inet_act_led {
 132                                 function = "inet_act_led";
 133                                 pins = "gpio8";
 134                         };
 135
 136                         pinctrl_inet_fail_led: inet_fail_led {
 137                                 function = "inet_fail_led";
 138                                 pins = "gpio9";
 139                         };
 140
 141                         pinctrl_dsl_led: dsl_led {
 142                                 function = "dsl_led";
 143                                 pins = "gpio10";
 144                         };
 145
 146                         pinctrl_post_fail_led: post_fail_led {
 147                                 function = "post_fail_led";
 148                                 pins = "gpio11";
 149                         };
 150
 151                         pinctrl_wlan_wps_led: wlan_wps_led {
 152                                 function = "wlan_wps_led";
 153                                 pins = "gpio12";
 154                         };
 155
 156                         pinctrl_usb_pwron: usb_pwron {
 157                                 function = "usb_pwron";
 158                                 pins = "gpio13";
 159                         };
 160
 161                         pinctrl_usb_device_led: usb_device_led {
 162                                 function = "usb_device_led";
 163                                 pins = "gpio13";
 164                         };
 165
 166                         pinctrl_usb_active: usb_active {
 167                                 function = "usb_active";
 168                                 pins = "gpio40";
 169                         };
 170                 };
 171
 172                 uart0: serial@10000100 {
 173                         compatible = "brcm,bcm6345-uart";
 174                         reg = <0x10000100 0x18>;
 175
 176                         interrupt-parent = <&periph_intc>;
 177                         interrupts = <28>;
 178
 179                         /* clocks = <&periph_clk>; */
 180                         /* clock-names = "refclk"; */
 181
 182                         status = "disabled";
 183                 };
 184
 185                 leds: led-controller@10000200 {
 186                         #address-cells = <1>;
 187                         #size-cells = <0>;
 188                         compatible = "brcm,bcm6328-leds";
 189                         reg = <0x10000200 0x24>;
 190                         status = "disabled";
 191                 };
 192
 193                 hsspi: spi@10003000 {
 194                         #address-cells = <1>;
 195                         #size-cells = <0>;
 196                         compatible = "brcm,bcm6328-hsspi";
 197                         reg = <0x10003000 0x600>;
 198                         interrupts = <29>;
 199                         /* clocks = <&clkctl 25>; */
 200                 };
 201         };
 202 };