target/linux/bcm63xx/dts/bcm6348-t-com-speedport-w-500v.dts

   1 #include "bcm6348.dtsi"
   2
   3 #include <dt-bindings/input/input.h>
   4
   5 / {
   6         model = "T-Com Speedport W 500V";
   7         compatible = "t-com,speedport-w-500v", "brcm,bcm6348";
   8
   9         aliases {
  10                 led-boot = &led_power_green;
  11                 led-failsafe = &led_power_green;
  12                 led-running = &led_power_green;
  13                 led-upgrade = &led_power_green;
  14         };
  15
  16         chosen {
  17                 bootargs = "rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  18                 stdout-path = "serial0:115200n8";
  19         };
  20
  21         keys {
  22                 compatible = "gpio-keys-polled";
  23                 #address-cells = <1>;
  24                 #size-cells = <0>;
  25                 poll-interval = <20>;
  26
  27                 reset {
  28                         label = "reset";
  29                         gpios = <&pinctrl 33 1>;
  30                         linux,code = <KEY_RESTART>;
  31                         debounce-interval = <60>;
  32                 };
  33         };
  34
  35         leds {
  36                 compatible = "gpio-leds";
  37
  38                 led_power_green: power_green {
  39                         label = "green:power";
  40                         gpios = <&pinctrl 0 1>;
  41                         default-state = "on";
  42                 };
  43                 power_red {
  44                         label = "red:power";
  45                         gpios = <&pinctrl 1 1>;
  46                 };
  47                 ppp_green {
  48                         label = "green:ppp";
  49                         gpios = <&pinctrl 3 1>;
  50                 };
  51                 pstn_green {
  52                         label = "green:pstn";
  53                         gpios = <&pinctrl 28 1>;
  54                 };
  55                 voip_green {
  56                         label = "green:voip";
  57                         gpios = <&pinctrl 32 1>;
  58                 };
  59         };
  60 };
  61
  62 &pflash {
  63         status = "okay";
  64
  65         partitions {
  66                 compatible = "fixed-partitions";
  67                 #address-cells = <1>;
  68                 #size-cells = <1>;
  69
  70                 cfe@0 {
  71                         label = "CFE";
  72                         reg = <0x000000 0x010000>;
  73                         read-only;
  74                 };
  75
  76                 linux@10000 {
  77                         label = "linux";
  78                         reg = <0x010000 0x3e0000>;
  79                         compatible = "brcm,bcm963xx-imagetag";
  80                 };
  81
  82                 nvram@3f0000 {
  83                         label = "nvram";
  84                         reg = <0x3f0000 0x010000>;
  85                 };
  86         };
  87 };
  88
  89 &pinctrl {
  90         pinctrl-names = "default";
  91         pinctrl-0 = <&pinctrl_pci>;
  92 };
  93
  94 &uart0 {
  95         status = "okay";
  96 };