target/linux/brcm63xx/dts/bcm96318ref.dts

   1 /dts-v1/;
   2
   3 #include "bcm6318.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Broadcom BCM96318REF reference board";
   9         compatible = "brcm,bcm96318ref", "brcm,bcm6318";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13         };
  14
  15         gpio-keys-polled {
  16                 compatible = "gpio-keys-polled";
  17                 #address-cells = <1>;
  18                 #size-cells = <0>;
  19                 poll-interval = <20>;
  20                 debounce-interval = <60>;
  21
  22                 wps {
  23                         label = "wps";
  24                         gpios = <&pinctrl 33 1>;
  25                         linux,code = <KEY_WPS_BUTTON>;
  26                 };
  27
  28                 reset {
  29                         label = "reset";
  30                         gpios = <&pinctrl 34 1>;
  31                         linux,code = <KEY_RESTART>;
  32                 };
  33         };
  34
  35         gpio-leds {
  36                 compatible = "gpio-leds";
  37
  38                 inet {
  39                         label = "96318REF:green:inet";
  40                         gpios = <&pinctrl 8 1>;
  41                 };
  42
  43                 inet_fail {
  44                         label = "96318REF:red:inet-fail";
  45                         gpios = <&pinctrl 9 1>;
  46                 };
  47
  48                 post_failed {
  49                         label = "96318REF:red:post-failed";
  50                         gpios = <&pinctrl 11 1>;
  51                 };
  52         };
  53 };
  54
  55 &hsspi {
  56         status = "ok";
  57
  58         flash@0 {
  59                 compatible = "jedec,spi-nor";
  60                 spi-max-frequency = <62500000>;
  61                 spi-tx-bus-width = <2>;
  62                 spi-rx-bus-width = <2>;
  63                 reg = <0>;
  64
  65                 #address-cells = <1>;
  66                 #size-cells = <1>;
  67
  68                 linux,part-probe = "bcm63xxpart";
  69         };
  70 };
  71
  72 &pinctrl {
  73         pinctrl-names = "default";
  74         pinctrl-0 = <&pinctrl_usb_pwron>;
  75 };