target/linux/brcm63xx/dts/fast2604.dts

   1 /dts-v1/;
   2
   3 #include "bcm6348.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         model = "Sagem F@ST2604";
   9         compatible = "sagem,f@st2604", "brcm,bcm6348";
  10
  11         chosen {
  12                 bootargs = "root=/dev/mtdblock2 rootfstype=squashfs,jffs2 noinitrd console=ttyS0,115200";
  13                 stdout-path = "serial0:115200n8";
  14         };
  15
  16         gpio-keys-polled {
  17                 compatible = "gpio-keys-polled";
  18                 #address-cells = <1>;
  19                 #size-cells = <0>;
  20                 poll-interval = <20>;
  21                 debounce-interval = <60>;
  22
  23                 reset {
  24                         label = "reset";
  25                         gpios = <&pinctrl 33 1>;
  26                         linux,code = <KEY_RESTART>;
  27                 };
  28         };
  29
  30         gpio-leds {
  31                 compatible = "gpio-leds";
  32
  33                 power_green {
  34                         label = "F@ST2604:green:power";
  35                         gpios = <&pinctrl 0 1>;
  36                         default-state = "on";
  37                 };
  38                 power_red {
  39                         label = "F@ST2604:red:power";
  40                         gpios = <&pinctrl 1 1>;
  41                 };
  42                 inet_red {
  43                         label = "F@ST2604:red:inet";
  44                         gpios = <&pinctrl 4 1>;
  45                 };
  46                 wps_green {
  47                         label = "F@ST2604:green:wps";
  48                         gpios = <&pinctrl 5 1>;
  49                 };
  50         };
  51 };
  52
  53 &pflash {
  54         status = "ok";
  55
  56         linux,part-probe = "bcm63xxpart";
  57
  58         cfe@0 {
  59                 label = "CFE";
  60                 reg = <0x000000 0x010000>;
  61                 read-only;
  62         };
  63
  64         linux@10000 {
  65                 label = "linux";
  66                 reg = <0x010000 0x3e0000>;
  67         };
  68
  69         nvram@3f0000 {
  70                 label = "nvram";
  71                 reg = <0x3f0000 0x010000>;
  72         };
  73 };
  74
  75 &pinctrl {
  76         pinctrl-names = "default";
  77         pinctrl-0 = <&pinctrl_pci &pinctrl_ext_mii>;
  78 };
  79
  80 &uart0 {
  81         status = "ok";
  82 };