brcm63xx: Fix HW553 support
[openwrt/staging/mkresin.git] / target / linux / brcm63xx / patches-3.10 / 526-board_CT6373-1.patch
1 --- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
2 +++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
3 @@ -45,6 +45,12 @@
4 #define NB4_SPI_GPIO_CLK 6
5 #define NB4_74HC64_GPIO(X) (NB4_74X164_GPIO_BASE + (X))
6
7 +#define CT6373_PID_OFFSET 0xff80
8 +#define CT6373_74X164_GPIO_BASE 64
9 +#define CT6373_SPI_GPIO_MOSI 7
10 +#define CT6373_SPI_GPIO_CLK 6
11 +#define CT6373_74HC64_GPIO(X) (CT6373_74X164_GPIO_BASE + (X))
12 +
13 /*
14 * known 3368 boards
15 */
16 @@ -2329,6 +2335,113 @@ static struct board_info __initdata boar
17 .num_spis = ARRAY_SIZE(nb4_spi_devices),
18 };
19
20 +
21 +struct spi_gpio_platform_data ct6373_spi_gpio_data = {
22 + .sck = CT6373_SPI_GPIO_CLK,
23 + .mosi = CT6373_SPI_GPIO_MOSI,
24 + .miso = SPI_GPIO_NO_MISO,
25 + .num_chipselect = 1,
26 +};
27 +
28 +static struct platform_device ct6373_spi_gpio = {
29 + .name = "spi_gpio",
30 + .id = 1,
31 + .dev = {
32 + .platform_data = &ct6373_spi_gpio_data,
33 + },
34 +};
35 +
36 +static struct platform_device * __initdata ct6373_devices[] = {
37 + &ct6373_spi_gpio,
38 +};
39 +
40 +const struct gen_74x164_chip_platform_data ct6373_74x164_platform_data = {
41 + .base = CT6373_74X164_GPIO_BASE
42 +};
43 +
44 +static struct spi_board_info ct6373_spi_devices[] = {
45 + {
46 + .modalias = "74x164",
47 + .max_speed_hz = 781000,
48 + .bus_num = 1,
49 + .controller_data = (void *) SPI_GPIO_NO_CHIPSELECT,
50 + .mode = SPI_MODE_0,
51 + .platform_data = &ct6373_74x164_platform_data
52 + }
53 +};
54 +
55 +static struct board_info __initdata board_ct6373_1 = {
56 + .name = "CT6373-1",
57 + .expected_cpu_id = 0x6358,
58 +
59 + .has_uart0 = 1,
60 + .has_pci = 1,
61 + .has_ohci0 = 1,
62 + .has_ehci0 = 1,
63 +
64 + .has_enet1 = 1,
65 + .enet1 = {
66 + .has_phy = 1,
67 + .phy_id = 0,
68 + .force_speed_100 = 1,
69 + .force_duplex_full = 1,
70 + },
71 +
72 + .leds = {
73 + {
74 + .name = "CT6373-1:green:power",
75 + .gpio = 0,
76 + .default_trigger = "default-on",
77 + },
78 + {
79 + .name = "CT6373-1:green:usb",
80 + .gpio = 3,
81 + .active_low = 1,
82 + },
83 + {
84 + .name = "CT6373-1:green:wlan",
85 + .gpio = 9,
86 + .active_low = 1,
87 + },
88 + {
89 + .name = "CT6373-1:green:adsl",
90 + .gpio = CT6373_74HC64_GPIO(0),
91 + .active_low = 1,
92 + },
93 + {
94 + .name = "CT6373-1:green:line",
95 + .gpio = CT6373_74HC64_GPIO(1),
96 + .active_low = 1,
97 + },
98 + {
99 + .name = "CT6373-1:green:fxs1",
100 + .gpio = CT6373_74HC64_GPIO(2),
101 + .active_low = 1,
102 + },
103 + {
104 + .name = "CT6373-1:green:fxs2",
105 + .gpio = CT6373_74HC64_GPIO(3),
106 + .active_low = 1,
107 + },
108 + },
109 +
110 + .buttons = {
111 + {
112 + .desc = "reset",
113 + .gpio = 35,
114 + .active_low = 1,
115 + .type = EV_KEY,
116 + .code = KEY_RESTART,
117 + .debounce_interval = BCM963XX_KEYS_DEBOUNCE_INTERVAL,
118 + },
119 + },
120 +
121 + .devs = ct6373_devices,
122 + .num_devs = ARRAY_SIZE(ct6373_devices),
123 + .spis = ct6373_spi_devices,
124 + .num_spis = ARRAY_SIZE(ct6373_spi_devices),
125 +};
126 +
127 static struct board_info __initdata board_HW553 = {
128 .name = "HW553",
129 .expected_cpu_id = 0x6358,
130 @@ -2666,6 +2779,7 @@ static const struct board_info __initcon
131 &board_nb4_ser_r2,
132 &board_nb4_fxc_r1,
133 &board_nb4_fxc_r2,
134 + &board_ct6373_1,
135 &board_HW553,
136 &board_spw303v,
137 #endif