target/linux/lantiq/dts/FRITZ7320.dts

   1 /dts-v1/;
   2
   3 /include/ "ar9.dtsi"
   4
   5 / {
   6         model = "FRITZ7320 - 1&1 HomeServer";
   7
   8         chosen {
   9                 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
  10
  11                 leds {
  12                         boot = &power;
  13                         failsafe = &power;
  14                         running = &power;
  15
  16                         internet = &info_green;
  17                         dsl = &power;
  18                         wifi = &wlan;
  19                 };
  20         };
  21
  22         memory@0 {
  23                 reg = <0x0 0x4000000>;
  24         };
  25
  26         fpi@10000000 {
  27                 localbus@0 {
  28                         nor-boot@0 {
  29                                 compatible = "lantiq,nor";
  30                                 bank-width = <2>;
  31                                 reg = <0 0x0 0x1000000>;
  32                                 #address-cells = <1>;
  33                                 #size-cells = <1>;
  34
  35                                 partition@0 {
  36                                         label = "urlader";
  37                                         reg = <0x00000 0x20000>;
  38                                         read-only;
  39                                 };
  40
  41                                 partition@20000 {
  42                                         label = "firmware";
  43                                         reg = <0x20000 0xf60000>;
  44                                 };
  45
  46                                 partition@f80000 {
  47                                         label = "tffs (1)";
  48                                         reg = <0xf80000 0x40000>;
  49                                         read-only;
  50                                 };
  51
  52                                 partition@fc0000 {
  53                                         label = "tffs (2)";
  54                                         reg = <0xfc0000 0x40000>;
  55                                         read-only;
  56                                 };
  57                         };
  58                 };
  59
  60                 gpio: pinmux@E100B10 {
  61                         pinctrl-names = "default";
  62                         pinctrl-0 = <&state_default>;
  63
  64                         state_default: pinmux {
  65                                 pci {
  66                                         lantiq,groups = "gnt1", "req1", "req2", "req3", "req4", "gnt2", "gnt3", "gnt4";
  67                                         lantiq,function = "pci";
  68                                 };
  69                                 pci-in {
  70                                         lantiq,groups = "req1", "req2", "req3", "req4";
  71                                         lantiq,output = <0>;
  72                                         lantiq,open-drain = <1>;
  73                                         lantiq,pull = <2>;
  74                                 };
  75                                 pci-out {
  76                                         lantiq,groups = "gnt1", "gnt2", "gnt3", "gnt4";
  77                                         lantiq,output = <1>;
  78                                         lantiq,pull = <0>;
  79                                 };
  80                         };
  81                 };
  82
  83                 etop@E180000 {
  84                         phy-mode = "mii";
  85                         mac-address = [ 00 11 22 33 44 55 ];
  86                 };
  87
  88                 ifxhcd@E101000 {
  89                         status = "okay";
  90                 };
  91
  92                 pci@E105400 {
  93                         status = "okay";
  94                         req-mask = <0xf>;
  95                         lantiq,bus-clock = <33333333>;
  96                         interrupt-map-mask = <0xf800 0x0 0x0 0x7>;
  97                         interrupt-map = <0x7000 0 0 1 &icu0 30 1>;
  98                         gpio-reset = <&gpio 21 0>;
  99                         req-mask = <0xf>; /* GNT1 */
 100                 };
 101         };
 102
 103         gpio-keys-polled {
 104                 compatible = "gpio-keys-polled";
 105                 #address-cells = <1>;
 106                 #size-cells = <0>;
 107                 poll-interval = <100>;
 108
 109                 rfkill {
 110                         label = "rfkill";
 111                         gpios = <&gpio 1 1>;
 112                         linux,code = <0xf7>;
 113                 };
 114                 dect {
 115                         label = "dect";
 116                         gpios = <&gpio 2 1>;
 117                         linux,code = <0x102>;
 118                 };
 119         };
 120
 121         gpio-leds {
 122                 compatible = "gpio-leds";
 123                 power: power {
 124                         label = "fritz7320:green:power";
 125                         gpios = <&gpio 44 1>;
 126                         default-state = "keep";
 127                 };
 128                 voice {
 129                         label = "fritz7320:green:fon";
 130                         gpios = <&gpio 47 1>;
 131                 };
 132                 dect {
 133                         label = "fritz7320:green:dect";
 134                         gpios = <&gpio 38 1>;
 135                 };
 136                 wlan: wlan {
 137                         label = "fritz7320:green:wlan";
 138                         gpios = <&gpio 37 1>;
 139                 };
 140                 info_green: info_green {
 141                         label = "fritz7320:green:info";
 142                         gpios = <&gpio 35 1>;
 143                 };
 144                 info_red {
 145                         label = "fritz7320:red:info";
 146                         gpios = <&gpio 45 1>;
 147                 };
 148         };
 149 };