lantiq: move partitions into partion table node
[openwrt/staging/mkresin.git] / target / linux / lantiq / dts / WBMR.dts
1 /dts-v1/;
2
3 /include/ "ar9.dtsi"
4
5 / {
6 model = "WBMR - Buffalo WBMR-HP-G300H";
7
8 chosen {
9 bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
10
11 leds {
12 boot = &power_green;
13 failsafe = &power_red;
14 running = &power_green;
15
16 dsl = &dsl;
17 internet = &online_green;
18 usb = &usb;
19 wifi = &wifi;
20 };
21 };
22
23 memory@0 {
24 reg = <0x0 0x4000000>;
25 };
26
27 fpi@10000000 {
28 localbus@0 {
29 nor-boot@0 {
30 compatible = "lantiq,nor";
31 bank-width = <2>;
32 reg = <0 0x0 0x2000000>;
33 #address-cells = <1>;
34 #size-cells = <1>;
35
36 partitions {
37 compatible = "fixed-partitions";
38 #address-cells = <1>;
39 #size-cells = <1>;
40
41 partition@0 {
42 label = "uboot";
43 reg = <0x00000 0x40000>;
44 read-only;
45 };
46
47 partition@40000 {
48 label = "uboot_env";
49 reg = <0x40000 0x20000>;
50 read-only;
51 };
52
53 partition@20000 {
54 label = "firmware";
55 reg = <0x60000 0x1f20000>;
56 };
57
58 partition@0x1fc0000 {
59 label = "board";
60 reg = <0x1fc0000 0x20000>;
61 read-only;
62 };
63
64 partition@0x1fe0000 {
65 label = "calibration";
66 reg = <0x1fe0000 0x20000>;
67 read-only;
68 };
69 };
70 };
71
72 mac_addr {
73 compatible = "lantiq,eth-mac";
74 reg = <0 0x1fd0024 0x6>;
75 };
76 };
77
78 gpio: pinmux@E100B10 {
79 pinctrl-names = "default";
80 pinctrl-0 = <&state_default>;
81
82 state_default: pinmux {
83 pci-in {
84 lantiq,groups = "req1";
85 lantiq,output = <0>;
86 lantiq,open-drain = <1>;
87 lantiq,pull = <2>;
88 };
89 pci-out {
90 lantiq,groups = "gnt1";
91 lantiq,output = <1>;
92 lantiq,pull = <0>;
93 };
94 pci_rst {
95 lantiq,pins = "io21";
96 lantiq,pull = <0>;
97 lantiq,output = <1>;
98 };
99 };
100 };
101
102 etop@E180000 {
103 phy-mode = "rgmii";
104 };
105
106 ifxhcd@E101000 {
107 status = "okay";
108 gpios = <&gpio 36 0>;
109 };
110
111 pci@E105400 {
112 status = "okay";
113 };
114 };
115
116 gpio-keys-polled {
117 compatible = "gpio-keys-polled";
118 #address-cells = <1>;
119 #size-cells = <0>;
120 poll-interval = <100>;
121
122 wps {
123 label = "wps";
124 gpios = <&gpio 0 1>;
125 linux,code = <0x211>;
126 };
127 reset {
128 label = "reset";
129 gpios = <&gpio 37 1>;
130 linux,code = <0x198>;
131 };
132 eject {
133 label = "eject";
134 gpios = <&gpio 34 1>;
135 linux,code = <0xf7>;
136 };
137 movie {
138 label = "movie";
139 gpios = <&gpio 22 1>;
140 linux,code = <0x109>;
141 };
142 };
143
144 gpio-leds {
145 compatible = "gpio-leds";
146
147 power_green: power {
148 label = "wbmr:green:power";
149 gpios = <&gpio 1 1>;
150 default-state = "keep";
151 };
152 power_red: power2 {
153 label = "wbmr:red:power";
154 gpios = <&gpio 5 1>;
155 };
156 security {
157 label = "wbmr:yellow:security";
158 gpios = <&gpio 14 1>;
159 };
160 wifi: wifi {
161 label = "wbmr:green:wireless";
162 gpios = <&gpio 15 1>;
163 };
164 dsl: dsl {
165 label = "wbmr:green:dsl";
166 gpios = <&gpio 16 1>;
167 };
168 online_green: online {
169 label = "wbmr:green:internet";
170 gpios = <&gpio 17 1>;
171 };
172 online2 {
173 label = "wbmr:red:internet";
174 gpios = <&gpio 18 1>;
175 };
176 movie {
177 label = "wbmr:blue:movie";
178 gpios = <&gpio 20 1>;
179 };
180 usb: usb {
181 label = "wbmr:green:usb";
182 gpios = <&gpio 28 1>;
183 default-state = "on";
184 };
185 };
186 };