lantiq: dts: drop falcon clock node
[openwrt/staging/mkresin.git] / target / linux / lantiq / files-4.14 / arch / mips / boot / dts / ARV4518PWR01.dtsi
1 #include "danube.dtsi"
2
3 #include <dt-bindings/input/input.h>
4
5 / {
6 chosen {
7 bootargs = "console=ttyLTQ0,115200";
8 };
9
10 aliases {
11 led-boot = &power;
12 led-failsafe = &power;
13 led-running = &power;
14 led-upgrade = &power;
15
16 led-dsl = &dsl;
17 led-internet = &online;
18 led-usb = &led_usb;
19 led-wifi = &wifi;
20 };
21
22 memory@0 {
23 device_type = "memory";
24 reg = <0x0 0x4000000>;
25 };
26
27 ath5k_eep {
28 compatible = "ath5k,eeprom";
29 ath,eep-flash = <&boardconfig 0x400>;
30 ath,mac-offset = <0x16>;
31 ath,mac-increment = <1>;
32 ath,eep-swap;
33 };
34
35 gpio-keys-polled {
36 compatible = "gpio-keys-polled";
37 poll-interval = <100>;
38
39 rfkill {
40 label = "rfkill";
41 gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
42 linux,code = <KEY_RFKILL>;
43 };
44 reset {
45 label = "reset";
46 gpios = <&gpio 30 GPIO_ACTIVE_LOW>;
47 linux,code = <KEY_RESTART>;
48 };
49 };
50
51 gpio-leds {
52 compatible = "gpio-leds";
53 power: power {
54 label = "power";
55 gpios = <&gpio 3 GPIO_ACTIVE_HIGH>;
56 default-state = "keep";
57 };
58 dsl: dsl {
59 label = "dsl";
60 gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
61 };
62 online: online {
63 label = "online";
64 gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
65 };
66 wifi: wifi {
67 label = "wifi";
68 gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
69 };
70 wps {
71 label = "wps";
72 gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
73 };
74 dsl2 {
75 label = "dsl2";
76 gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
77 };
78 led_usb: usb {
79 label = "usb";
80 gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
81 };
82 voice {
83 label = "voice";
84 gpios = <&gpiomm 0 GPIO_ACTIVE_LOW>;
85 };
86 fxs1 {
87 label = "fxs1";
88 gpios = <&gpiomm 1 GPIO_ACTIVE_LOW>;
89 };
90 fxs2 {
91 label = "fxs2";
92 gpios = <&gpiomm 2 GPIO_ACTIVE_LOW>;
93 };
94 fxo {
95 label = "fxo";
96 gpios = <&gpiomm 3 GPIO_ACTIVE_LOW>;
97 };
98 };
99
100 usb_vbus: regulator-usb-vbus {
101 compatible = "regulator-fixed";
102
103 regulator-name = "USB_VBUS";
104
105 regulator-min-microvolt = <5000000>;
106 regulator-max-microvolt = <5000000>;
107
108 gpio = <&gpio 14 GPIO_ACTIVE_HIGH>;
109 enable-active-high;
110 };
111 };
112
113 &gpio {
114 pinctrl-names = "default";
115 pinctrl-0 = <&state_default>;
116
117 state_default: pinmux {
118 ebu {
119 lantiq,groups = "ebu cs1";
120 lantiq,function = "ebu";
121 };
122 pci_in {
123 lantiq,groups = "req1", "req2";
124 lantiq,function = "pci";
125 lantiq,open-drain = <1>;
126 lantiq,pull = <2>;
127 lantiq,output = <0>;
128 };
129 pci_out {
130 lantiq,groups = "gnt1", "gnt2";
131 lantiq,function = "pci";
132 lantiq,pull = <0>;
133 lantiq,output = <1>;
134 };
135 };
136 };
137
138 &gsw {
139 phy-mode = "mii";
140 mtd-mac-address = <&boardconfig 0x16>;
141 };
142
143 &localbus {
144 nor@0 {
145 compatible = "lantiq,nor";
146 bank-width = <2>;
147 reg = <0 0x0 0x2000000>;
148
149 partitions {
150 compatible = "fixed-partitions";
151 #address-cells = <1>;
152 #size-cells = <1>;
153
154 partition@0 {
155 label = "uboot";
156 reg = <0x00000 0x10000>; /* 64 KB */
157 read-only;
158 };
159
160 partition@10000 {
161 label = "uboot_env";
162 reg = <0x10000 0x10000>; /* 64 KB */
163 read-only;
164 };
165
166 partition@20000 {
167 label = "firmware";
168 reg = <0x20000 0x3d0000>;
169 };
170
171 boardconfig: partition@400000 {
172 label = "boardconfig";
173 reg = <0x3f0000 0x10000>;
174 read-only;
175 };
176 };
177 };
178
179 gpiomm: gpiomm@1 {
180 compatible = "lantiq,gpio-mm";
181 reg = <1 0x0 0x10 >;
182 #address-cells = <1>;
183 #size-cells = <1>;
184 #gpio-cells = <2>;
185 gpio-controller;
186 lantiq,shadow = <0x0>;
187 };
188 };
189
190 &pci0 {
191 status = "okay";
192 gpio-reset = <&gpio 21 GPIO_ACTIVE_HIGH>;
193 req-mask = <0xf>;
194 };
195
196 &usb_phy {
197 status = "okay";
198 };
199
200 &usb {
201 status = "okay";
202 vbus-supply = <&usb_vbus>;
203 };
204
205 &vmmc {
206 status = "okay";
207 gpios = <&gpio 31 GPIO_ACTIVE_HIGH>;
208 };