target/linux/lantiq/files-4.14/arch/mips/boot/dts/VG3503J.dts

   1 /dts-v1/;
   2
   3 #include "vr9.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6
   7 / {
   8         compatible = "arcadyan,vg3503j", "lantiq,xway", "lantiq,vr9";
   9         model = "BT OpenReach VDSL Modem";
  10
  11         chosen {
  12                 bootargs = "console=ttyLTQ0,115200";
  13         };
  14
  15         aliases {
  16                 led-boot = &power_green;
  17                 led-failsafe = &power_red;
  18                 led-running = &power_green;
  19
  20                 led-dsl = &dsl;
  21         };
  22
  23         memory@0 {
  24                 reg = <0x0 0x2000000>;
  25         };
  26
  27         fpi@10000000 {
  28                 localbus@0 {
  29                         ranges = <0 0 0x0 0x3ffffff>;
  30                         nor-boot@0 {
  31                                 compatible = "lantiq,nor";
  32                                 bank-width = <2>;
  33                                 reg = <0 0x0 0x2000000>;
  34                                 #address-cells = <1>;
  35                                 #size-cells = <1>;
  36
  37                                 partitions {
  38                                         compatible = "fixed-partitions";
  39                                         #address-cells = <1>;
  40                                         #size-cells = <1>;
  41
  42                                         partition@0 {
  43                                                 label = "uboot";
  44                                                 reg = <0x00000 0x20000>;
  45                                         };
  46
  47                                         partition@20000 {
  48                                                 label = "firmware";
  49                                                 reg = <0x20000 0x7d0000>;
  50                                         };
  51
  52                                         partition@7f0000 {
  53                                                 label = "uboot-env";
  54                                                 reg = <0x7f0000 0x10000>;
  55                                         };
  56                                 };
  57                         };
  58                 };
  59
  60                 gpio: pinmux@E100B10 {
  61                         pinctrl-names = "default";
  62                         pinctrl-0 = <&state_default>;
  63
  64                         state_default: pinmux {
  65                                 mdio {
  66                                         lantiq,groups = "mdio";
  67                                         lantiq,function = "mdio";
  68                                 };
  69                                 gphy-leds {
  70                                         lantiq,groups = "gphy0 led0", "gphy0 led1",
  71                                                         "gphy0 led2", "gphy1 led0",
  72                                                         "gphy1 led1", "gphy1 led2";
  73                                         lantiq,function = "gphy";
  74                                         lantiq,pull = <2>;
  75                                         lantiq,open-drain = <0>;
  76                                         lantiq,output = <1>;
  77                                 };
  78                         };
  79                 };
  80         };
  81
  82         gphy-xrx200 {
  83                 compatible = "lantiq,phy-xrx200";
  84                 firmware1 = "lantiq/xrx200_phy11g_a14.bin";     /*VR9 1.1*/
  85                 firmware2 = "lantiq/xrx200_phy11g_a22.bin";     /*VR9 1.2*/
  86                 phys = [ 00 01 ];
  87         };
  88
  89         gpio-keys-polled {
  90                 compatible = "gpio-keys-polled";
  91                 #address-cells = <1>;
  92                 #size-cells = <0>;
  93                 poll-interval = <100>;
  94                 reset {
  95                         label = "reset";
  96                         gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
  97                         linux,code = <KEY_RESTART>;
  98                 };
  99         };
 100
 101         gpio-leds {
 102                 compatible = "gpio-leds";
 103
 104                 power_red: power2 {
 105                         label = "vg3503j:red:power";
 106                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
 107                 };
 108                 dsl: dsl {
 109                         label = "vg3503j:green:dsl";
 110                         gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
 111                 };
 112                 power_green: power {
 113                         label = "vg3503j:green:power";
 114                         gpios = <&gpio 28 GPIO_ACTIVE_LOW>;
 115                         default-state = "keep";
 116                 };
 117         };
 118 };
 119
 120 &eth0 {
 121         interface@0 {
 122                 compatible = "lantiq,xrx200-pdi";
 123                 #address-cells = <1>;
 124                 #size-cells = <0>;
 125                 reg = <0>;
 126
 127                 lantiq,switch;
 128                 ethernet@2 {
 129                         compatible = "lantiq,xrx200-pdi-port";
 130                         reg = <2>;
 131                         phy-mode = "mii";
 132                         phy-handle = <&phy11>;
 133                 };
 134                 ethernet@4 {
 135                         compatible = "lantiq,xrx200-pdi-port";
 136                         reg = <4>;
 137                         phy-mode = "mii";
 138                         phy-handle = <&phy13>;
 139                 };
 140         };
 141
 142         mdio@0 {
 143                 #address-cells = <1>;
 144                 #size-cells = <0>;
 145                 compatible = "lantiq,xrx200-mdio";
 146                 phy11: ethernet-phy@11 {
 147                         reg = <0x11>;
 148                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 149                         lantiq,led1h = <0x70>;
 150                         lantiq,led1l = <0x00>;
 151                         lantiq,led2h = <0x00>;
 152                         lantiq,led2l = <0x03>;
 153                 };
 154                 phy13: ethernet-phy@13 {
 155                         reg = <0x13>;
 156                         compatible = "lantiq,phy11g", "ethernet-phy-ieee802.3-c22";
 157                         lantiq,led1h = <0x70>;
 158                         lantiq,led1l = <0x00>;
 159                         lantiq,led2h = <0x00>;
 160                         lantiq,led2l = <0x03>;
 161                 };
 162         };
 163 };