target/linux/lantiq/files/arch/mips/boot/dts/P2812HNUF1.dts

   1 /dts-v1/;
   2
   3 #include "P2812HNUFX.dtsi"
   4
   5 / {
   6         compatible = "zyxel,p-2812hnu-f1", "zyxel,p-2812hnu", "lantiq,xway", "lantiq,vr9";
   7         model = "ZyXEL P-2812HNU-F1";
   8
   9         aliases {
  10                 led-usb = &led_usb1;
  11                 led-usb2 = &led_usb2;
  12         };
  13
  14         leds {
  15                 led_usb1: usb1 {
  16                         label = "p2812hnuf1:green:usb1";
  17                         gpios = <&gpio 38 GPIO_ACTIVE_LOW>;
  18                 };
  19                 led_usb2: usb2 {
  20                         label = "p2812hnuf1:green:usb2";
  21                         gpios = <&gpio 44 GPIO_ACTIVE_LOW>;
  22                 };
  23         };
  24 };
  25
  26 &localbus {
  27         flash@0 {
  28                 compatible = "lantiq,nand-xway";
  29                 lantiq,cs = <1>;
  30                 bank-width = <2>;
  31                 reg = <0 0x0 0x2000000>;
  32
  33                 partitions {
  34                         compatible = "fixed-partitions";
  35                         #address-cells = <1>;
  36                         #size-cells = <1>;
  37
  38                         partition@0 {
  39                                 label = "uboot";
  40                                 reg = <0x00000 0x40000>;
  41                         };
  42                         partition@40000 {
  43                                 label = "uboot-env";
  44                                 reg = <0x40000 0x20000>;
  45                         };
  46                         partition@60000 {
  47                                 label = "kernel";
  48                                 reg = <0x60000 0x300000>;
  49                         };
  50                         partition@360000 {
  51                                 label = "ubi";
  52                                 reg = <0x360000 0x7ca0000>;
  53                         };
  54                 };
  55         };
  56 };
  57
  58 &pci0 {
  59         wifi@1814,3062 {
  60                 compatible = "pci1814,3062";
  61                 reg = <0x7000 0 0 0 0>;
  62                 ralink,eeprom = "RT3062.eeprom";
  63         };
  64 };
  65
  66 &pcie0 {
  67         status = "disabled";
  68 };