target/linux/ramips/dts/ArcherC20v4.dts

   1 /dts-v1/;
   2
   3 #include "TPLINK-8M.dtsi"
   4
   5 #include <dt-bindings/input/input.h>
   6 #include <dt-bindings/gpio/gpio.h>
   7
   8 / {
   9         compatible = "tplink,c20-v4", "mediatek,mt7628an-soc";
  10         model = "TP-Link Archer C20 v4";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 lan {
  16                         label = "c20-v4:green:lan";
  17                         gpios = <&gpio1 10 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 power {
  21                         label = "c20-v4:green:power";
  22                         gpios = <&gpio0 2 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 wan {
  26                         label = "c20-v4:green:wan";
  27                         gpios = <&gpio1 11 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 wan_orange {
  31                         label = "c20-v4:orange:wan";
  32                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  33                 };
  34
  35                 wlan5g {
  36                         label = "c20-v4:green:wlan5g";
  37                         gpios = <&gpio1 8 GPIO_ACTIVE_LOW>;
  38                 };
  39
  40                 wlan2g {
  41                         label = "c20-v4:green:wlan2g";
  42                         gpios = <&gpio1 7 GPIO_ACTIVE_LOW>;
  43                 };
  44
  45                 wps {
  46                         label = "c20-v4:green:wps";
  47                         gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
  48                 };
  49         };
  50
  51         gpio-keys-polled {
  52                 compatible = "gpio-keys-polled";
  53                 #address-cells = <1>;
  54                 #size-cells = <0>;
  55                 poll-interval = <20>;
  56
  57                 reset {
  58                         label = "reset";
  59                         gpios = <&gpio1 6 GPIO_ACTIVE_LOW>;
  60                         linux,code = <KEY_RESTART>;
  61                 };
  62
  63                 rfkill {
  64                         label = "rfkill";
  65                         gpios = <&gpio1 5 GPIO_ACTIVE_LOW>;
  66                         linux,code = <KEY_RFKILL>;
  67                 };
  68         };
  69 };
  70
  71 &wmac {
  72         mtd-mac-address-increment = <(-2)>;
  73 };
  74
  75 &ethernet {
  76         mediatek,portmap = "wllll";
  77 };
  78
  79 &pinctrl {
  80         state_default: pinctrl0 {
  81                 gpio {
  82                         ralink,group = "i2s", "refclk", "p0led_an", "p1led_an", "p2led_an", "p3led_an", "p4led_an", "wdt";
  83                         ralink,function = "gpio";
  84                 };
  85         };
  86 };
  87
  88 &pcie {
  89         status = "okay";
  90
  91         pcie-bridge {
  92                 mt76@0,0 {
  93                         reg = <0x0000 0 0 0 0>;
  94                         device_type = "pci";
  95                         mediatek,mtd-eeprom = <&factory 0x28000>;
  96                         ieee80211-freq-limit = <5000000 6000000>;
  97                         mtd-mac-address = <&factory 0xf100>;
  98                         mtd-mac-address-increment = <(-1)>;
  99                 };
 100         };
 101 };