target/linux/ramips/dts/MZK-W300NH2.dts

   1 /dts-v1/;
   2
   3 #include "rt3050.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "planex,mzk-w300nh2", "ralink,rt3052-soc";
  10         model = "Planex MZK-W300NH2";
  11
  12         aliases {
  13                 led-boot = &led_power;
  14                 led-failsafe = &led_power;
  15                 led-running = &led_power;
  16                 led-upgrade = &led_power;
  17         };
  18
  19         cfi@1f000000 {
  20                 compatible = "cfi-flash";
  21                 reg = <0x1f000000 0x800000>;
  22                 bank-width = <2>;
  23                 device-width = <2>;
  24
  25                 partitions {
  26                         compatible = "fixed-partitions";
  27                         #address-cells = <1>;
  28                         #size-cells = <1>;
  29
  30                         partition@0 {
  31                                 label = "u-boot";
  32                                 reg = <0x0 0x30000>;
  33                                 read-only;
  34                         };
  35
  36                         partition@30000 {
  37                                 label = "u-boot-env";
  38                                 reg = <0x30000 0x10000>;
  39                                 read-only;
  40                         };
  41
  42                         factory: partition@40000 {
  43                                 label = "factory";
  44                                 reg = <0x40000 0x10000>;
  45                                 read-only;
  46                         };
  47
  48                         partition@3e0000 {
  49                                 label = "cimage";
  50                                 reg = <0x3e0000 0x20000>;
  51                                 read-only;
  52                         };
  53
  54                         partition@50000 {
  55                                 label = "firmware";
  56                                 reg = <0x50000 0x390000>;
  57                         };
  58                 };
  59         };
  60
  61         gpio-leds {
  62                 compatible = "gpio-leds";
  63
  64                 led_power: power {
  65                         label = "mzk-w300nh2:green:power";
  66                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  67                 };
  68
  69                 wlan {
  70                         label = "mzk-w300nh2:amber:wlan";
  71                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  72                 };
  73
  74                 wps {
  75                         label = "mzk-w300nh2:amber:wps";
  76                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  77                 };
  78         };
  79
  80         gpio-keys-polled {
  81                 compatible = "gpio-keys-polled";
  82                 poll-interval = <20>;
  83
  84                 wps {
  85                         label = "wps";
  86                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  87                         linux,code = <KEY_WPS_BUTTON>;
  88                 };
  89
  90                 reset {
  91                         label = "reset";
  92                         gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
  93                         linux,code = <KEY_RESTART>;
  94                 };
  95
  96                 rt {
  97                         label = "rt";
  98                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  99                         linux,code = <BTN_0>;
 100                 };
 101         };
 102 };
 103
 104 &pinctrl {
 105         state_default: pinctrl0 {
 106                 gpio {
 107                         ralink,group = "spi", "i2c", "jtag", "rgmii", "mdio", "uartf";
 108                         ralink,function = "gpio";
 109                 };
 110         };
 111 };
 112
 113 &ethernet {
 114         mtd-mac-address = <&factory 0x4>;
 115 };
 116
 117 &esw {
 118         mediatek,portmap = <0x2f>;
 119 };
 120
 121 &wmac {
 122         ralink,mtd-eeprom = <&factory 0>;
 123 };