ramips: add support for indicating the boot state using multiple leds
[openwrt/staging/mkresin.git] / target / linux / ramips / dts / TEW-638APB-V2.dts
1 /dts-v1/;
2
3 #include "rt3050.dtsi"
4
5 #include <dt-bindings/gpio/gpio.h>
6 #include <dt-bindings/input/input.h>
7
8 / {
9 compatible = "trendnet,tew-638apb-v2", "ralink,rt3050-soc";
10 model = "TRENDnet TEW-638APB v2";
11
12 aliases {
13 led-boot = &led_wps_green;
14 led-failsafe = &led_wps_green;
15 led-running = &led_wps_green;
16 led-upgrade = &led_wps_green;
17 };
18
19 cfi@1f000000 {
20 compatible = "cfi-flash";
21 reg = <0x1f000000 0x400000>;
22 bank-width = <2>;
23 device-width = <2>;
24
25 partitions {
26 compatible = "fixed-partitions";
27 #address-cells = <1>;
28 #size-cells = <1>;
29
30 partition@0 {
31 label = "u-boot";
32 reg = <0x0 0x30000>;
33 read-only;
34 };
35
36 partition@30000 {
37 label = "u-boot-env";
38 reg = <0x30000 0x10000>;
39 read-only;
40 };
41
42 factory: partition@40000 {
43 label = "factory";
44 reg = <0x40000 0x10000>;
45 read-only;
46 };
47
48 partition@50000 {
49 label = "firmware";
50 reg = <0x50000 0x3b0000>;
51 };
52 };
53 };
54
55 gpio-keys-polled {
56 compatible = "gpio-keys-polled";
57 poll-interval = <20>;
58
59 reset {
60 label = "reset";
61 gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
62 linux,code = <KEY_RESTART>;
63 };
64
65 wps {
66 label = "wps";
67 gpios = <&gpio0 0 GPIO_ACTIVE_LOW>;
68 linux,code = <KEY_WPS_BUTTON>;
69 };
70 };
71
72 gpio-leds {
73 compatible = "gpio-leds";
74
75 wps {
76 label = "tew-638apb-v2:orange:wps";
77 gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
78 };
79
80 led_wps_green: wps2 {
81 label = "tew-638apb-v2:green:wps";
82 gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
83 };
84 };
85 };
86
87 &pinctrl {
88 state_default: pinctrl0 {
89 gpio {
90 ralink,group = "uartf";
91 ralink,function = "gpio";
92 };
93 };
94 };
95
96 &ethernet {
97 mtd-mac-address = <&factory 0x4>;
98 };
99
100 &esw {
101 mediatek,portmap = <0x2f>;
102 };
103
104 &wmac {
105 ralink,mtd-eeprom = <&factory 0>;
106 };