target/linux/ramips/dts/WIZARD8800.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 / {
   6         compatible = "easyacc,wizard8800", "ralink,rt5350-soc";
   7         model = "EASYACC WI-STOR WIZARD 8800";
   8 };
   9
  10 &gpio0 {
  11         status = "okay";
  12 };
  13
  14 &gpio1 {
  15         status = "okay";
  16 };
  17
  18 &spi0 {
  19         status = "okay";
  20
  21         m25p80@0 {
  22                 #address-cells = <1>;
  23                 #size-cells = <1>;
  24                 compatible = "jedec,spi-nor";
  25                 reg = <0>;
  26                 spi-max-frequency = <10000000>;
  27
  28                 partition@0 {
  29                         label = "u-boot";
  30                         reg = <0x0 0x30000>;
  31                         read-only;
  32                 };
  33
  34                 partition@30000 {
  35                         label = "u-boot-env";
  36                         reg = <0x30000 0x10000>;
  37                         read-only;
  38                 };
  39
  40                 factory: partition@40000 {
  41                         label = "factory";
  42                         reg = <0x40000 0x10000>;
  43                         read-only;
  44                 };
  45
  46                 partition@50000 {
  47                         label = "firmware";
  48                         reg = <0x50000 0x7b0000>;
  49                 };
  50         };
  51 };
  52
  53 &pinctrl {
  54         state_default: pinctrl0 {
  55                 gpio {
  56                         ralink,group = "i2c", "jtag", "rgmii", "mdio", "uartf";
  57                         ralink,function = "gpio";
  58                 };
  59         };
  60 };
  61
  62 &ethernet {
  63         mtd-mac-address = <&factory 0x4>;
  64 };
  65
  66 &esw {
  67         mediatek,portmap = <0x2f>;
  68 };
  69
  70 &ehci {
  71         status = "okay";
  72 };
  73
  74 &ohci {
  75         status = "okay";
  76 };
  77
  78 &wmac {
  79         ralink,mtd-eeprom = <&factory 0>;
  80 };