target/linux/ramips/dts/WMDR-143N.dts

   1 /dts-v1/;
   2
   3 #include "rt3883.dtsi"
   4
   5 / {
   6         compatible = "loewe,wmdr-143n", "ralink,rt3883-soc";
   7         model = "Loewe WMDR-143N";
   8 };
   9
  10 &spi0 {
  11         status = "okay";
  12
  13         m25p80@0 {
  14                 #address-cells = <1>;
  15                 #size-cells = <1>;
  16                 compatible = "jedec,spi-nor";
  17                 reg = <0>;
  18                 spi-max-frequency = <25000000>;
  19
  20                 partition@0 {
  21                         label = "u-boot";
  22                         reg = <0x0 0x30000>;
  23                         read-only;
  24                 };
  25
  26                 partition@30000 {
  27                         label = "u-boot-env";
  28                         reg = <0x30000 0x00010000>;
  29                         read-only;
  30                 };
  31
  32                 factory: partition@40000 {
  33                         label = "factory";
  34                         reg = <0x40000 0x10000>;
  35                         read-only;
  36                 };
  37
  38                 partition@50000 {
  39                         label = "firmware";
  40                         reg = <0x50000 0x7b0000>;
  41                 };
  42         };
  43 };
  44
  45 &ethernet {
  46         port@0 {
  47                 phy-handle = <&phy0>;
  48                 phy-mode = "mii";
  49         };
  50         mdio-bus {
  51                 status = "okay";
  52
  53                 phy0: ethernet-phy@0 {
  54                         reg = <0>;
  55                         phy-mode = "mii";
  56                 };
  57         };
  58 };
  59
  60 &wmac {
  61         status = "okay";
  62         ralink,mtd-eeprom = <&factory 0>;
  63         mtd-mac-address = <&factory 0x4>;
  64 };