target/linux/ramips/dts/X5.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "poray,x5", "ralink,rt5350-soc";
  10         model = "Poray X5";
  11
  12         gpio-leds {
  13                 compatible = "gpio-leds";
  14
  15                 power {
  16                         label = "x5:green:power";
  17                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  18                 };
  19
  20                 20 {
  21                         label = "x5:green:20";
  22                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  23                 };
  24
  25                 50 {
  26                         label = "x5:green:50";
  27                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  28                 };
  29
  30                 80 {
  31                         label = "x5:green:80";
  32                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  33                 };
  34         };
  35
  36         gpio-keys-polled {
  37                 compatible = "gpio-keys-polled";
  38                 #address-cells = <1>;
  39                 #size-cells = <0>;
  40                 poll-interval = <20>;
  41
  42                 bat {
  43                         label = "bat";
  44                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  45                         linux,code = <KEY_WPS_BUTTON>;
  46                 };
  47
  48                 reset {
  49                         label = "reset";
  50                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  51                         linux,code = <KEY_RESTART>;
  52                 };
  53
  54                 mode {
  55                         label = "mode";
  56                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  57                         linux,code = <BTN_0>;
  58                         linux,input-type = <EV_SW>;
  59                 };
  60         };
  61
  62         gpio_export {
  63                 compatible = "gpio-export";
  64                 #size-cells = <0>;
  65
  66                 usb-mode {
  67                         gpio-export,name = "usb-mode";
  68                         gpio-export,output = <0>;
  69                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  70                 };
  71         };
  72 };
  73
  74 &spi0 {
  75         status = "okay";
  76
  77         m25p80@0 {
  78                 #address-cells = <1>;
  79                 #size-cells = <1>;
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <10000000>;
  83
  84                 partition@0 {
  85                         label = "u-boot";
  86                         reg = <0x0 0x30000>;
  87                         read-only;
  88                 };
  89
  90                 partition@30000 {
  91                         label = "u-boot-env";
  92                         reg = <0x30000 0x10000>;
  93                         read-only;
  94                 };
  95
  96                 factory: partition@40000 {
  97                         label = "factory";
  98                         reg = <0x40000 0x10000>;
  99                         read-only;
 100                 };
 101
 102                 partition@50000 {
 103                         label = "firmware";
 104                         reg = <0x50000 0x7b0000>;
 105                 };
 106         };
 107 };
 108
 109 &pinctrl {
 110         state_default: pinctrl0 {
 111                 gpio {
 112                         ralink,group = "i2c", "jtag", "uartf";
 113                         ralink,function = "gpio";
 114                 };
 115         };
 116 };
 117
 118 &ethernet {
 119         mtd-mac-address = <&factory 0x4>;
 120 };
 121
 122 &esw {
 123         mediatek,portmap = <0x2f>;
 124         mediatek,led_polarity = <1>;
 125 };
 126
 127 &wmac {
 128         ralink,mtd-eeprom = <&factory 0>;
 129         ralink,led-polarity = <1>;
 130 };
 131
 132 &ehci {
 133         status = "okay";
 134 };
 135
 136 &ohci {
 137         status = "okay";
 138 };