target/linux/ramips/dts/X5.dts

   1 /dts-v1/;
   2
   3 #include "rt5350.dtsi"
   4
   5 #include <dt-bindings/gpio/gpio.h>
   6 #include <dt-bindings/input/input.h>
   7
   8 / {
   9         compatible = "poray,x5", "ralink,rt5350-soc";
  10         model = "Poray X5";
  11
  12         aliases {
  13                 led-status = &led_power;
  14         };
  15
  16         gpio-leds {
  17                 compatible = "gpio-leds";
  18
  19                 led_power: power {
  20                         label = "x5:green:power";
  21                         gpios = <&gpio0 13 GPIO_ACTIVE_LOW>;
  22                 };
  23
  24                 20 {
  25                         label = "x5:green:20";
  26                         gpios = <&gpio0 12 GPIO_ACTIVE_LOW>;
  27                 };
  28
  29                 50 {
  30                         label = "x5:green:50";
  31                         gpios = <&gpio0 11 GPIO_ACTIVE_LOW>;
  32                 };
  33
  34                 80 {
  35                         label = "x5:green:80";
  36                         gpios = <&gpio0 7 GPIO_ACTIVE_LOW>;
  37                 };
  38         };
  39
  40         gpio-keys-polled {
  41                 compatible = "gpio-keys-polled";
  42                 poll-interval = <20>;
  43
  44                 bat {
  45                         label = "bat";
  46                         gpios = <&gpio0 9 GPIO_ACTIVE_LOW>;
  47                         linux,code = <KEY_WPS_BUTTON>;
  48                 };
  49
  50                 reset {
  51                         label = "reset";
  52                         gpios = <&gpio0 10 GPIO_ACTIVE_LOW>;
  53                         linux,code = <KEY_RESTART>;
  54                 };
  55
  56                 mode {
  57                         label = "mode";
  58                         gpios = <&gpio0 14 GPIO_ACTIVE_LOW>;
  59                         linux,code = <BTN_0>;
  60                         linux,input-type = <EV_SW>;
  61                 };
  62         };
  63
  64         gpio_export {
  65                 compatible = "gpio-export";
  66                 #size-cells = <0>;
  67
  68                 usb-mode {
  69                         gpio-export,name = "usb-mode";
  70                         gpio-export,output = <0>;
  71                         gpios = <&gpio0 18 GPIO_ACTIVE_LOW>;
  72                 };
  73         };
  74 };
  75
  76 &spi0 {
  77         status = "okay";
  78
  79         m25p80@0 {
  80                 compatible = "jedec,spi-nor";
  81                 reg = <0>;
  82                 spi-max-frequency = <10000000>;
  83
  84                 partitions {
  85                         compatible = "fixed-partitions";
  86                         #address-cells = <1>;
  87                         #size-cells = <1>;
  88
  89                         partition@0 {
  90                                 label = "u-boot";
  91                                 reg = <0x0 0x30000>;
  92                                 read-only;
  93                         };
  94
  95                         partition@30000 {
  96                                 label = "u-boot-env";
  97                                 reg = <0x30000 0x10000>;
  98                                 read-only;
  99                         };
 100
 101                         factory: partition@40000 {
 102                                 label = "factory";
 103                                 reg = <0x40000 0x10000>;
 104                                 read-only;
 105                         };
 106
 107                         partition@50000 {
 108                                 label = "firmware";
 109                                 reg = <0x50000 0x7b0000>;
 110                         };
 111                 };
 112         };
 113 };
 114
 115 &pinctrl {
 116         state_default: pinctrl0 {
 117                 gpio {
 118                         ralink,group = "i2c", "jtag", "uartf";
 119                         ralink,function = "gpio";
 120                 };
 121         };
 122 };
 123
 124 &ethernet {
 125         mtd-mac-address = <&factory 0x4>;
 126 };
 127
 128 &esw {
 129         mediatek,portmap = <0x2f>;
 130         mediatek,led_polarity = <1>;
 131 };
 132
 133 &wmac {
 134         ralink,mtd-eeprom = <&factory 0>;
 135         ralink,led-polarity = <1>;
 136 };
 137
 138 &ehci {
 139         status = "okay";
 140 };
 141
 142 &ohci {
 143         status = "okay";
 144 };