target/linux/sunxi/base-files/lib/firmware/brcm/brcmfmac43430-sdio.txt

   1 #AP6212_NVRAM_V1.0_20140603
   2 # 2.4 GHz, 20 MHz BW mode
   3
   4 # The following parameter values are just placeholders, need to be updated.
   5 manfid=0x2d0
   6 prodid=0x0726
   7 vendid=0x14e4
   8 devid=0x43e2
   9 boardtype=0x0726
  10 boardrev=0x1101
  11 boardnum=22
  12 macaddr=00:90:4c:c5:12:38
  13 sromrev=11
  14 boardflags=0x00404201
  15 xtalfreq=26000
  16 nocrc=1
  17 ag0=255
  18 aa2g=1
  19 ccode=ALL
  20
  21 pa0itssit=0x20
  22 extpagain2g=0
  23
  24 #PA parameters for 2.4GHz, measured at CHIP OUTPUT
  25 pa2ga0=-168,7161,-820
  26 AvVmid_c0=0x0,0xc8
  27 cckpwroffset0=5
  28
  29 # PPR params
  30 maxp2ga0=90
  31 txpwrbckof=6
  32 cckbw202gpo=0x5555
  33 legofdmbw202gpo=0x77777777
  34 mcsbw202gpo=0xaaaaaaaa
  35
  36 # OFDM IIR :
  37 ofdmdigfilttype=7
  38 # PAPD mode:
  39 papdmode=2
  40
  41 il0macaddr=00:90:4c:c5:12:38
  42 wl0id=0x431b
  43
  44 #OOB parameters
  45 hostwake=0x40
  46 hostrdy=0x41
  47 usbrdy=0x03
  48 usbrdydelay=100
  49 deadman_to=0xffffffff
  50 # muxenab: 0x1 for UART enable, 0x10 for Host awake
  51 muxenab=0x10
  52 # CLDO PWM voltage settings - 0x4 - 1.1 volt
  53 #cldo_pwm=0x4