uboot-oxnas: bump to U-Boot 2014.10
authorJohn Crispin <john@openwrt.org>
Tue, 2 Dec 2014 15:25:37 +0000 (15:25 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 2 Dec 2014 15:25:37 +0000 (15:25 +0000)
A few trivial changes were needed to adapt to upstream framework changes.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 43499

package/boot/uboot-oxnas/Makefile
package/boot/uboot-oxnas/files/board/ox820/Kconfig [new file with mode: 0644]
package/boot/uboot-oxnas/files/board/ox820/MAINTAINERS [new file with mode: 0644]
package/boot/uboot-oxnas/files/board/ox820/ox820.c
package/boot/uboot-oxnas/files/configs/ox820_defconfig [new file with mode: 0644]
package/boot/uboot-oxnas/files/include/configs/ox820.h
package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch [new file with mode: 0644]
package/boot/uboot-oxnas/patches/150-spl-block.patch
package/boot/uboot-oxnas/patches/300-oxnas-target.patch
package/boot/uboot-oxnas/patches/800-fix-bootm-assertion.patch

index aee7808c513b92f39e68148729046ab0dabf2323..e2339432fe6ff75afbb47e470385e749ba7855be 100644 (file)
@@ -9,7 +9,7 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=u-boot
-PKG_VERSION:=2014.04
+PKG_VERSION:=2014.10
 PKG_RELEASE:=1
 
 PKG_BUILD_DIR:=$(BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
@@ -18,7 +18,7 @@ PKG_SOURCE_URL:= \
        http://mirror2.openwrt.org/sources \
        ftp://ftp.denx.de/pub/u-boot
 
-PKG_MD5SUM:=6d2116d1385a66e9a59742caa9d62a54
+PKG_MD5SUM:=3ddcaee2f05b7c464778112ec83664b5
 
 PKG_LICENSE:=GPL-2.0 GPL-2.0+
 PKG_LICENSE_FILES:=Licenses/README
diff --git a/package/boot/uboot-oxnas/files/board/ox820/Kconfig b/package/boot/uboot-oxnas/files/board/ox820/Kconfig
new file mode 100644 (file)
index 0000000..8f631aa
--- /dev/null
@@ -0,0 +1,15 @@
+if TARGET_OX820
+
+config SYS_CPU
+       default "arm1136"
+
+config SYS_SOC
+       default "nas782x"
+
+config SYS_BOARD
+       default "ox820"
+
+config SYS_CONFIG_NAME
+       default "ox820"
+
+endif
diff --git a/package/boot/uboot-oxnas/files/board/ox820/MAINTAINERS b/package/boot/uboot-oxnas/files/board/ox820/MAINTAINERS
new file mode 100644 (file)
index 0000000..a86ba26
--- /dev/null
@@ -0,0 +1,6 @@
+SHEEVAPLUG BOARD
+M:     Daniel Golle <daniel@makrotopia.org>
+S:     Maintained
+F:     board/ox820/
+F:     include/configs/ox820.h
+F:     configs/ox820_defconfig
index 32c91f475975591d53b0ede2255180f258ac6610..f93cc9ca58e9b8b8d99ec37ffb17b463b0263d44 100644 (file)
@@ -279,6 +279,7 @@ int board_nand_init(struct nand_chip *chip)
 int board_init(void)
 {
        gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100;
+       gd->bd->bi_arch_number = MACH_TYPE_OXNAS;
 
        /* assume uart is already initialized by SPL */
 
diff --git a/package/boot/uboot-oxnas/files/configs/ox820_defconfig b/package/boot/uboot-oxnas/files/configs/ox820_defconfig
new file mode 100644 (file)
index 0000000..48a16d0
--- /dev/null
@@ -0,0 +1,3 @@
+CONFIG_ARM=y
+CONFIG_OX820=y
+CONFIG_TARGET_OX820=y
index 7ade1dc46ff31601ede2ebb90fdde7d2f7c1641d..e3c71e61e4f1270bfee42dcab06ad9acdefcf03b 100644 (file)
@@ -4,6 +4,8 @@
 /* High Level Configuration Options */
 #define CONFIG_ARM1136
 #define CONFIG_OX820
+#define CONFIG_SYS_GENERIC_BOARD
+#define CONFIG_BOARD_EARLY_INIT_F
 
 #include <asm/arch/cpu.h>      /* get chip and board defs */
 
@@ -50,7 +52,7 @@
 #define CONFIG_SYS_ATA_REG_OFFSET      0
 #define CONFIG_SYS_ATA_ALT_OFFSET      0
 #define CONFIG_IDE_PLX
-#define CONFIG_SYS_IDE_MAXDEVICE       1
+#define CONFIG_SYS_IDE_MAXDEVICE       2
 #define CONFIG_SYS_IDE_MAXBUS          1
 #define CONFIG_IDE_PREINIT
 #define CONFIG_LBA48
 #define CONFIG_CMD_ZIP
 #define CONFIG_CMD_UNZIP
 #define CONFIG_CMD_TIME
-#define CONFIG_CMD_TERMINAL
 #define CONFIG_CMD_SETEXPR
 #define CONFIG_CMD_MD5SUM
 #define CONFIG_CMD_HASH
diff --git a/package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch b/package/boot/uboot-oxnas/patches/010-capacity-is-unsigned.patch
new file mode 100644 (file)
index 0000000..3990aa9
--- /dev/null
@@ -0,0 +1,42 @@
+From df9fb90120423c4c55b66a5dc09af23f605a406b Mon Sep 17 00:00:00 2001
+From: Daniel Golle <daniel@makrotopia.org>
+Date: Mon, 1 Dec 2014 21:37:25 +0100
+Subject: [PATCH] disk/part.c: use unsigned format when printing capacity
+To: u-boot@lists.denx.de
+
+Large disks otherwise produce highly unplausible output such as
+        Capacity: 1907729.0 MB = 1863.0 GB (-387938128 x 512)
+
+As supposedly all size-related decimals are unsigned, use unsigned
+format in printf statement, resulting in a correct capacity being
+displayed:
+        Capacity: 1907729.0 MB = 1863.0 GB (3907029168 x 512)
+
+Signed-off-by: Daniel Golle <daniel@makrotopia.org>
+---
+ disk/part.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/disk/part.c b/disk/part.c
+index 43485c9..7c67ea6 100644
+--- a/disk/part.c
++++ b/disk/part.c
+@@ -229,13 +229,13 @@ void dev_print (block_dev_desc_t *dev_desc)
+                       printf ("            Supports 48-bit addressing\n");
+ #endif
+ #if defined(CONFIG_SYS_64BIT_LBA)
+-              printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%Ld x %ld)\n",
++              printf ("            Capacity: %lu.%lu MB = %lu.%lu GB (%Lu x %lu)\n",
+                       mb_quot, mb_rem,
+                       gb_quot, gb_rem,
+                       lba,
+                       dev_desc->blksz);
+ #else
+-              printf ("            Capacity: %ld.%ld MB = %ld.%ld GB (%ld x %ld)\n",
++              printf ("            Capacity: %lu.%lu MB = %lu.%lu GB (%lu x %lu)\n",
+                       mb_quot, mb_rem,
+                       gb_quot, gb_rem,
+                       (ulong)lba,
+-- 
+2.1.3
+
index a258f3fe0cee828dd33dfddbea28437bbe3244ff..5d76084859dae7a51d58397fb257804544c88570 100644 (file)
@@ -25,7 +25,7 @@
  #ifdef CONFIG_SPL_ETH_DEVICE
 --- a/common/cmd_nvedit.c
 +++ b/common/cmd_nvedit.c
-@@ -47,6 +47,7 @@ DECLARE_GLOBAL_DATA_PTR;
+@@ -49,6 +49,7 @@ DECLARE_GLOBAL_DATA_PTR;
        !defined(CONFIG_ENV_IS_IN_SPI_FLASH)    && \
        !defined(CONFIG_ENV_IS_IN_REMOTE)       && \
        !defined(CONFIG_ENV_IS_IN_UBI)          && \
@@ -35,7 +35,7 @@
  SPI_FLASH|NVRAM|MMC|FAT|REMOTE|UBI} or CONFIG_ENV_IS_NOWHERE
 --- a/common/Makefile
 +++ b/common/Makefile
-@@ -45,6 +45,7 @@ obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_o
+@@ -63,6 +63,7 @@ obj-$(CONFIG_ENV_IS_IN_ONENAND) += env_o
  obj-$(CONFIG_ENV_IS_IN_SPI_FLASH) += env_sf.o
  obj-$(CONFIG_ENV_IS_IN_REMOTE) += env_remote.o
  obj-$(CONFIG_ENV_IS_IN_UBI) += env_ubi.o
@@ -43,7 +43,7 @@
  obj-$(CONFIG_ENV_IS_NOWHERE) += env_nowhere.o
  
  # command
-@@ -191,6 +192,8 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o
+@@ -213,6 +214,8 @@ obj-$(CONFIG_UPDATE_TFTP) += update.o
  obj-$(CONFIG_USB_KEYBOARD) += usb_kbd.o
  obj-$(CONFIG_CMD_DFU) += cmd_dfu.o
  obj-$(CONFIG_CMD_GPT) += cmd_gpt.o
index cfe918d5e68c55b5fe6e983d0634e6cff0eb00e6..44e584204544437fce41e106e0ec1be13d0094a6 100644 (file)
@@ -8,20 +8,6 @@
  #define MACH_TYPE_MICRO9M              1169
  #define MACH_TYPE_BUG                  1179
  #define MACH_TYPE_AT91SAM9263EK        1202
---- a/boards.cfg
-+++ b/boards.cfg
-@@ -57,6 +57,11 @@ Active  arm         arm1136        mx35
- Active  arm         arm1136        mx35        -               woodburn            woodburn_sd                          woodburn_sd:IMX_CONFIG=board/woodburn/imximage.cfg                                                                                -
- Active  arm         arm1136        mx35        CarMediaLab     -                   flea3                                -                                                                                                                                 Stefano Babic <sbabic@denx.de>
- Active  arm         arm1136        mx35        freescale       -                   mx35pdk                              -                                                                                                                                 Stefano Babic <sbabic@denx.de>
-+Active  arm         arm1136        nas782x     -               -                   ox820                                -                                                                                                                                 -
-+Active  arm         arm1136        nas782x     -               nas782x             ox820_sata                           ox820:BOOT_FROM_SATA                                                                                                              -
-+Active  arm         arm1136        nas782x     -               nas782x             ox820_fat                            ox820:BOOT_FROM_SATA,BOOT_FROM_FAT
-+Active  arm         arm1136        nas782x     -               nas782x             ox820_ext4                           ox820:BOOT_FROM_SATA,BOOT_FROM_EXT4                                                                                               -
-+Active  arm         arm1136        nas782x     -               nas782x             ox820_nand                           ox820:BOOT_FROM_NAND                                                                                                              -
- Active  arm         arm1176        bcm2835     raspberrypi     rpi_b               rpi_b                                -                                                                                                                                 Stephen Warren <swarren@wwwdotorg.org>
- Active  arm         arm1176        tnetv107x   ti              tnetv107xevm        tnetv107x_evm                        -                                                                                                                                 Chan-Taek Park <c-park@ti.com>
- Active  arm         arm720t        -           armltd          integrator          integratorap_cm720t                  integratorap:CM720T                                                                                                               Linus Walleij <linus.walleij@linaro.org>
 --- a/drivers/block/Makefile
 +++ b/drivers/block/Makefile
 @@ -21,3 +21,4 @@ obj-$(CONFIG_IDE_SIL680) += sil680.o
  obj-$(CONFIG_SCSI_SYM53C8XX) += sym53c8xx.o
  obj-$(CONFIG_SYSTEMACE) += systemace.o
 +obj-$(CONFIG_IDE_PLX) += plxsata_ide.o
---- a/drivers/serial/serial_ns16550.c
-+++ b/drivers/serial/serial_ns16550.c
-@@ -135,6 +135,14 @@ static int calc_divisor (NS16550_t port)
-       }
- #endif
-+#ifdef CONFIG_OX820
-+      {
-+              /* with additional 3 bit fractional */
-+              u32 div = (CONFIG_SYS_NS16550_CLK + gd->baudrate) / (gd->baudrate * 2);
-+              port->reg9 = (div & 7) << 5;
-+              return (div >> 3);
-+      }
-+#endif
- #define MODE_X_DIV 16
-       /* Compute divisor value. Normally, we should simply return:
-        *   CONFIG_SYS_NS16550_CLK) / MODE_X_DIV / gd->baudrate
 --- a/drivers/usb/host/Makefile
 +++ b/drivers/usb/host/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
+@@ -33,6 +33,7 @@ obj-$(CONFIG_USB_EHCI_MX6) += ehci-mx6.o
  obj-$(CONFIG_USB_EHCI_OMAP) += ehci-omap.o
  obj-$(CONFIG_USB_EHCI_PPC4XX) += ehci-ppc4xx.o
  obj-$(CONFIG_USB_EHCI_MARVELL) += ehci-marvell.o
 +obj-$(CONFIG_USB_EHCI_OXNAS) += ehci-oxnas.o
  obj-$(CONFIG_USB_EHCI_PCI) += ehci-pci.o
  obj-$(CONFIG_USB_EHCI_SPEAR) += ehci-spear.o
- obj-$(CONFIG_USB_EHCI_TEGRA) += ehci-tegra.o
---- a/spl/Makefile
-+++ b/spl/Makefile
-@@ -207,8 +207,13 @@ cmd_objcopy = $(OBJCOPY) $(OBJCOPYFLAGS)
- OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJCFLAGS) -O binary
-+ifdef CONFIG_OX820
- $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
-       $(call if_changed,objcopy)
-+      $(OBJTREE)/tools/mkox820crc $@
-+else
-+      $(call if_changed,objcopy)
-+endef
- LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
- ifneq ($(CONFIG_SPL_TEXT_BASE),)
+ obj-$(CONFIG_USB_EHCI_SUNXI) += ehci-sunxi.o
 --- a/tools/.gitignore
 +++ b/tools/.gitignore
-@@ -7,6 +7,7 @@
+@@ -9,6 +9,7 @@
  /mkenvimage
  /mkimage
  /mkexynosspl
 +/mkox820crc
  /mpc86x_clk
  /mxsboot
- /ncb
+ /mksunxiboot
 --- a/tools/Makefile
 +++ b/tools/Makefile
-@@ -131,6 +131,12 @@ hostprogs-$(CONFIG_KIRKWOOD) += kwboot$(
- hostprogs-y += proftool$(SFX)
- hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela$(SFX)
+@@ -143,6 +143,12 @@ hostprogs-$(CONFIG_KIRKWOOD) += kwboot
+ hostprogs-y += proftool
+ hostprogs-$(CONFIG_STATIC_RELA) += relocate-rela
  
 +
 +hostprogs-$(CONFIG_OX820) += mkox820crc$(SFX)
 +
-+mkox820crc$(SFX)-objs := mkox820crc.o crc32.o
++mkox820crc$(SFX)-objs := mkox820crc.o lib/crc32.o
 +
 +
  # We build some files with extra pedantic flags to try to minimize things
  # that won't build on some weird host compiler -- though there are lots of
  # exceptions for files that aren't complaint.
+--- a/drivers/serial/ns16550.c
++++ b/drivers/serial/ns16550.c
+@@ -118,6 +118,14 @@ int ns16550_calc_divisor(NS16550_t port,
+       }
+       port->osc_12m_sel = 0;                  /* clear if previsouly set */
+ #endif
++#ifdef CONFIG_OX820
++      {
++              /* with additional 3 bit fractional */
++              u32 div = (CONFIG_SYS_NS16550_CLK + baudrate) / (baudrate * 2);
++              port->reg9 = (div & 7) << 5;
++              return (div >> 3);
++      }
++#endif
+       return DIV_ROUND_CLOSEST(clock, mode_x_div * baudrate);
+ }
+--- a/scripts/Makefile.spl
++++ b/scripts/Makefile.spl
+@@ -202,6 +202,9 @@ OBJCOPYFLAGS_$(SPL_BIN).bin = $(SPL_OBJC
+ $(obj)/$(SPL_BIN).bin: $(obj)/$(SPL_BIN) FORCE
+       $(call if_changed,objcopy)
++ifdef CONFIG_OX820
++      $(OBJTREE)/tools/mkox820crc $@
++endef
+ LDFLAGS_$(SPL_BIN) += -T u-boot-spl.lds $(LDFLAGS_FINAL)
+ ifneq ($(CONFIG_SPL_TEXT_BASE),)
+--- a/arch/arm/Kconfig
++++ b/arch/arm/Kconfig
+@@ -488,6 +488,9 @@ config TARGET_BALLOON3
+ config TARGET_H2200
+       bool "Support h2200"
++config TARGET_OX820
++      bool "Support ox820"
++
+ config TARGET_PALMLD
+       bool "Support palmld"
+@@ -650,6 +653,7 @@ source "board/logicpd/imx27lite/Kconfig"
+ source "board/logicpd/imx31_litekit/Kconfig"
+ source "board/mpl/vcma9/Kconfig"
+ source "board/olimex/mx23_olinuxino/Kconfig"
++source "board/ox820/Kconfig"
+ source "board/palmld/Kconfig"
+ source "board/palmtc/Kconfig"
+ source "board/palmtreo680/Kconfig"
index 3abeb3215c5a73b25fd48edfdc5b75429c1e6c94..957c492917df127dbf40255ff2afdf789ff0b107 100644 (file)
@@ -1,8 +1,6 @@
-diff --git a/common/cmd_bootm.c b/common/cmd_bootm.c
-index 166b901..9af3fd3 100644
 --- a/common/cmd_bootm.c
 +++ b/common/cmd_bootm.c
-@@ -745,7 +745,7 @@ static int do_bootm_subcommand(cmd_tbl_t *cmdtp, int flag, int argc,
+@@ -77,7 +77,7 @@ static int do_bootm_subcommand(cmd_tbl_t
                return CMD_RET_USAGE;
        }