Changed pin selections in low-level mmc driver
authorHamish Guthrie <hcg@openwrt.org>
Sat, 17 Mar 2007 16:19:09 +0000 (16:19 +0000)
committerHamish Guthrie <hcg@openwrt.org>
Sat, 17 Mar 2007 16:19:09 +0000 (16:19 +0000)
SVN-Revision: 6596

target/linux/at91-2.6/patches/004-mmc-driver.patch [new file with mode: 0644]

diff --git a/target/linux/at91-2.6/patches/004-mmc-driver.patch b/target/linux/at91-2.6/patches/004-mmc-driver.patch
new file mode 100644 (file)
index 0000000..31e307b
--- /dev/null
@@ -0,0 +1,30 @@
+--- linux-2.6.19.2/arch/arm/mach-at91rm9200/board-vlink.c      2007-03-16 16:46:50.000000000 +0100
++++ linux-2.6.19.2.new/arch/arm/mach-at91rm9200/board-vlink.c  2007-03-17 11:27:00.000000000 +0100
+@@ -83,13 +83,13 @@
+       .pullup_pin     = AT91_PIN_PD5,
+ };
+-/*static struct at91_mmc_data __initdata ek_mmc_data = {
+-      .det_pin        = AT91_PIN_PB27,
+-      .is_b           = 0,
++static struct at91_mmc_data __initdata vlink_mmc_data = {
++//    .det_pin        = AT91_PIN_PB27,
++      .slot_b         = 0,
+       .wire4          = 1,
+-      .wp_pin         = AT91_PIN_PA17,
++//    .wp_pin         = AT91_PIN_PA17,
+ };
+-*/
++
+ static struct spi_board_info vlink_spi_devices[] = {
+       {       /* DataFlash chip */
+@@ -127,7 +127,7 @@
+ #else
+       /* MMC */
+ //    at91_set_gpio_output(AT91_PIN_PB22, 1); /* this MMC card slot can optionally use SPI signaling (CS3). */
+-//    at91_add_device_mmc(&vlink_mmc_data);
++      at91_add_device_mmc(&vlink_mmc_data);
+ #endif
+       /* VGA */
+ }