more cleaning
authorFlorian Fainelli <florian@openwrt.org>
Fri, 26 Mar 2010 16:07:24 +0000 (16:07 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Fri, 26 Mar 2010 16:07:24 +0000 (16:07 +0000)
SVN-Revision: 20482

target/linux/ar7/patches/100-board_support.patch [deleted file]
target/linux/ar7/patches/110-flash.patch [deleted file]
target/linux/ar7/patches/120-gpio_chrdev.patch [deleted file]
target/linux/ar7/patches/130-vlynq.patch [deleted file]
target/linux/ar7/patches/150-cpmac_not_broken.patch [deleted file]
target/linux/ar7/patches/160-vlynq-bus_id_removal.patch [deleted file]
target/linux/ar7/patches/500-serial_kludge.patch [deleted file]
target/linux/ar7/patches/900-cpmac_multiqueue.patch [deleted file]

diff --git a/target/linux/ar7/patches/100-board_support.patch b/target/linux/ar7/patches/100-board_support.patch
deleted file mode 100644 (file)
index 01fe965..0000000
+++ /dev/null
@@ -1,86 +0,0 @@
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -19,6 +19,24 @@ choice
-       prompt "System type"
-       default SGI_IP22
-+config AR7
-+      bool "Texas Instruments AR7"
-+      select BOOT_ELF32
-+      select DMA_NONCOHERENT
-+      select CEVT_R4K
-+      select CSRC_R4K
-+      select IRQ_CPU
-+      select NO_EXCEPT_FILL
-+      select SWAP_IO_SPACE
-+      select SYS_HAS_CPU_MIPS32_R1
-+      select SYS_HAS_EARLY_PRINTK
-+      select SYS_SUPPORTS_32BIT_KERNEL
-+      select SYS_SUPPORTS_KGDB
-+      select SYS_SUPPORTS_LITTLE_ENDIAN
-+      select SYS_SUPPORTS_BIG_ENDIAN
-+      select GENERIC_GPIO
-+      select GENERIC_HARDIRQS_NO__DO_IRQ
-+
- config MACH_ALCHEMY
-       bool "Alchemy processor based machines"
---- a/arch/mips/kernel/traps.c
-+++ b/arch/mips/kernel/traps.c
-@@ -1256,9 +1256,22 @@ void *set_except_vector(int n, void *add
-       exception_handlers[n] = handler;
-       if (n == 0 && cpu_has_divec) {
--              *(u32 *)(ebase + 0x200) = 0x08000000 |
--                                        (0x03ffffff & (handler >> 2));
--              local_flush_icache_range(ebase + 0x200, ebase + 0x204);
-+              if ((handler ^ (ebase + 4)) & 0xfc000000) {
-+                      /* lui k0, 0x0000 */
-+                      *(u32 *)(ebase + 0x200) = 0x3c1a0000 | (handler >> 16);
-+                      /* ori k0, 0x0000 */
-+                      *(u32 *)(ebase + 0x204) =
-+                                      0x375a0000 | (handler & 0xffff);
-+                      /* jr k0 */
-+                      *(u32 *)(ebase + 0x208) = 0x03400008;
-+                      /* nop */
-+                      *(u32 *)(ebase + 0x20C) = 0x00000000;
-+                      flush_icache_range(ebase + 0x200, ebase + 0x210);
-+              } else {
-+                      *(u32 *)(ebase + 0x200) =
-+                              0x08000000 | (0x03ffffff & (handler >> 2));
-+                      flush_icache_range(ebase + 0x200, ebase + 0x204);
-+              }
-       }
-       return (void *)old_handler;
- }
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -181,6 +181,13 @@ libs-$(CONFIG_SIBYTE_CFE) += arch/mips/s
- #
- #
-+# Texas Instruments AR7
-+#
-+core-$(CONFIG_AR7)            += arch/mips/ar7/
-+cflags-$(CONFIG_AR7)          += -Iinclude/asm-mips/ar7
-+load-$(CONFIG_AR7)            += 0xffffffff94100000
-+
-+#
- # Acer PICA 61, Mips Magnum 4000 and Olivetti M700.
- #
- core-$(CONFIG_MACH_JAZZ)      += arch/mips/jazz/
---- a/arch/mips/include/asm/page.h
-+++ b/arch/mips/include/asm/page.h
-@@ -185,8 +185,10 @@ typedef struct { unsigned long pgprot; }
- #define VM_DATA_DEFAULT_FLAGS (VM_READ | VM_WRITE | VM_EXEC | \
-                                VM_MAYREAD | VM_MAYWRITE | VM_MAYEXEC)
--#define UNCAC_ADDR(addr)      ((addr) - PAGE_OFFSET + UNCAC_BASE)
--#define CAC_ADDR(addr)                ((addr) - UNCAC_BASE + PAGE_OFFSET)
-+#define UNCAC_ADDR(addr)      ((addr) - PAGE_OFFSET + UNCAC_BASE +    \
-+                               PHYS_OFFSET)
-+#define CAC_ADDR(addr)                ((addr) - UNCAC_BASE + PAGE_OFFSET -    \
-+                               PHYS_OFFSET)
- #include <asm-generic/memory_model.h>
- #include <asm-generic/page.h>
diff --git a/target/linux/ar7/patches/110-flash.patch b/target/linux/ar7/patches/110-flash.patch
deleted file mode 100644 (file)
index 975eb83..0000000
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -196,6 +196,12 @@ config MTD_MYLOADER_PARTS
-         You will still need the parsing functions to be called by the driver
-         for your particular device. It won't happen automatically.
-+config MTD_AR7_PARTS
-+      tristate "TI AR7 partitioning support"
-+      depends on MTD_PARTITIONS
-+      ---help---
-+        TI AR7 partitioning support
-+
- comment "User Modules And Translation Layers"
- config MTD_CHAR
---- a/drivers/mtd/maps/physmap.c
-+++ b/drivers/mtd/maps/physmap.c
-@@ -80,7 +80,7 @@ static const char *rom_probe_types[] = {
-                                       "map_rom",
-                                       NULL };
- #ifdef CONFIG_MTD_PARTITIONS
--static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", NULL };
-+static const char *part_probe_types[] = { "cmdlinepart", "RedBoot", "ar7part", NULL };
- #endif
- static int physmap_flash_probe(struct platform_device *dev)
diff --git a/target/linux/ar7/patches/120-gpio_chrdev.patch b/target/linux/ar7/patches/120-gpio_chrdev.patch
deleted file mode 100644 (file)
index fa61e5c..0000000
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/char/Kconfig
-+++ b/drivers/char/Kconfig
-@@ -974,6 +974,15 @@ config MWAVE
-         To compile this driver as a module, choose M here: the
-         module will be called mwave.
-+config AR7_GPIO
-+      tristate "TI AR7 GPIO Support"
-+      depends on AR7
-+      help
-+        Give userspace access to the GPIO pins on the Texas Instruments AR7 
-+        processors.
-+
-+        If compiled as a module, it will be called ar7_gpio.
-+
- config SCx200_GPIO
-       tristate "NatSemi SCx200 GPIO Support"
-       depends on SCx200
---- a/drivers/char/Makefile
-+++ b/drivers/char/Makefile
-@@ -90,6 +90,7 @@ obj-$(CONFIG_HW_RANDOM)              += hw_random/
- obj-$(CONFIG_PPDEV)           += ppdev.o
- obj-$(CONFIG_NWBUTTON)                += nwbutton.o
- obj-$(CONFIG_NWFLASH)         += nwflash.o
-+obj-$(CONFIG_AR7_GPIO)                += ar7_gpio.o
- obj-$(CONFIG_SCx200_GPIO)     += scx200_gpio.o
- obj-$(CONFIG_PC8736x_GPIO)    += pc8736x_gpio.o
- obj-$(CONFIG_NSC_GPIO)                += nsc_gpio.o
diff --git a/target/linux/ar7/patches/130-vlynq.patch b/target/linux/ar7/patches/130-vlynq.patch
deleted file mode 100644 (file)
index 12eb538..0000000
+++ /dev/null
@@ -1,21 +0,0 @@
---- a/drivers/Kconfig
-+++ b/drivers/Kconfig
-@@ -104,6 +104,8 @@ source "drivers/auxdisplay/Kconfig"
- source "drivers/uio/Kconfig"
-+source "drivers/vlynq/Kconfig"
-+
- source "drivers/xen/Kconfig"
- source "drivers/staging/Kconfig"
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -103,6 +103,7 @@ obj-$(CONFIG_DCA)          += dca/
- obj-$(CONFIG_HID)             += hid/
- obj-$(CONFIG_PPC_PS3)         += ps3/
- obj-$(CONFIG_OF)              += of/
-+obj-$(CONFIG_VLYNQ)           += vlynq/
- obj-$(CONFIG_SSB)             += ssb/
- obj-$(CONFIG_VIRTIO)          += virtio/
- obj-$(CONFIG_STAGING)         += staging/
diff --git a/target/linux/ar7/patches/150-cpmac_not_broken.patch b/target/linux/ar7/patches/150-cpmac_not_broken.patch
deleted file mode 100644 (file)
index 0c8a20d..0000000
+++ /dev/null
@@ -1,11 +0,0 @@
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -1883,7 +1883,7 @@ config SC92031
- config CPMAC
-       tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
--      depends on NET_ETHERNET && EXPERIMENTAL && AR7 && BROKEN
-+      depends on NET_ETHERNET && EXPERIMENTAL && AR7
-       select PHYLIB
-       help
-         TI AR7 CPMAC Ethernet support
diff --git a/target/linux/ar7/patches/160-vlynq-bus_id_removal.patch b/target/linux/ar7/patches/160-vlynq-bus_id_removal.patch
deleted file mode 100644 (file)
index c408370..0000000
+++ /dev/null
@@ -1,148 +0,0 @@
---- a/drivers/vlynq/vlynq.c    2009-05-31 20:41:57.000000000 +0200
-+++ b/drivers/vlynq/vlynq.c    2009-05-31 22:06:36.000000000 +0200
-@@ -82,6 +82,7 @@
- static void vlynq_dump_regs(struct vlynq_device *dev)
- {
-       int i;
-+
-       printk(KERN_DEBUG "VLYNQ local=%p remote=%p\n",
-                       dev->local, dev->remote);
-       for (i = 0; i < 32; i++) {
-@@ -95,6 +96,7 @@
- static void vlynq_dump_mem(u32 *base, int count)
- {
-       int i;
-+
-       for (i = 0; i < (count + 3) / 4; i++) {
-               if (i % 4 == 0) printk(KERN_DEBUG "\nMEM[0x%04x]:", i * 4);
-               printk(KERN_DEBUG " 0x%08x", *(base + i));
-@@ -194,20 +196,24 @@
- static void vlynq_local_ack(unsigned int irq)
- {
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-+
-       u32 status = vlynq_reg_read(dev->local->status);
-+
-       if (printk_ratelimit())
-               printk(KERN_DEBUG "%s: local status: 0x%08x\n",
--                     dev->dev.bus_id, status);
-+                     dev_name(&dev->dev), status);
-       vlynq_reg_write(dev->local->status, status);
- }
- static void vlynq_remote_ack(unsigned int irq)
- {
-       struct vlynq_device *dev = get_irq_chip_data(irq);
-+
-       u32 status = vlynq_reg_read(dev->remote->status);
-+
-       if (printk_ratelimit())
-               printk(KERN_DEBUG "%s: remote status: 0x%08x\n",
--                     dev->dev.bus_id, status);
-+                     dev_name(&dev->dev), status);
-       vlynq_reg_write(dev->remote->status, status);
- }
-@@ -262,7 +268,7 @@
-       if (dev->local_irq == dev->remote_irq) {
-               printk(KERN_ERR
-                      "%s: local vlynq irq should be different from remote\n",
--                     dev->dev.bus_id);
-+                     dev_name(&dev->dev));
-               return -EINVAL;
-       }
-@@ -304,7 +310,7 @@
-       }
-       if (request_irq(dev->irq, vlynq_irq, IRQF_SHARED, "vlynq", dev)) {
--              printk(KERN_ERR "%s: request_irq failed\n", dev->dev.bus_id);
-+              printk(KERN_ERR "%s: request_irq failed\n", dev_name(&dev->dev));
-               return -EAGAIN;
-       }
-@@ -403,7 +409,7 @@
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                               "%s: using remote clock divisor %d\n",
--                              dev->dev.bus_id, i - vlynq_rdiv1 + 1);
-+                              dev_name(&dev->dev), i - vlynq_rdiv1 + 1);
-                       dev->divisor = i;
-                       return 0;
-               } else {
-@@ -433,7 +439,7 @@
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                               "%s: using local clock divisor %d\n",
--                              dev->dev.bus_id, i - vlynq_ldiv1 + 1);
-+                              dev_name(&dev->dev), i - vlynq_ldiv1 + 1);
-                       dev->divisor = i;
-                       return 0;
-               } else {
-@@ -460,7 +466,7 @@
-       if (vlynq_linked(dev)) {
-               printk(KERN_DEBUG "%s: using external clock\n",
--                      dev->dev.bus_id);
-+                      dev_name(&dev->dev));
-                       dev->divisor = vlynq_div_external;
-               return 0;
-       }
-@@ -507,7 +513,7 @@
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                              "%s: using local clock divisor %d\n",
--                             dev->dev.bus_id, dev->divisor - vlynq_ldiv1 + 1);
-+                             dev_name(&dev->dev), dev->divisor - vlynq_ldiv1 + 1);
-                       return 0;
-               }
-               break;
-@@ -521,7 +527,7 @@
-               if (vlynq_linked(dev)) {
-                       printk(KERN_DEBUG
-                              "%s: using remote clock divisor %d\n",
--                             dev->dev.bus_id, dev->divisor - vlynq_rdiv1 + 1);
-+                             dev_name(&dev->dev), dev->divisor - vlynq_rdiv1 + 1);
-                       return 0;
-               }
-               break;
-@@ -662,8 +668,7 @@
-       dev->id = pdev->id;
-       dev->dev.bus = &vlynq_bus_type;
-       dev->dev.parent = &pdev->dev;
--      snprintf(dev->dev.bus_id, BUS_ID_SIZE, "vlynq%d", dev->id);
--      dev->dev.bus_id[BUS_ID_SIZE - 1] = 0;
-+      dev_set_name(&dev->dev, "vlynq%d", dev->id);
-       dev->dev.platform_data = pdev->dev.platform_data;
-       dev->dev.release = vlynq_device_release;
-@@ -673,9 +678,9 @@
-       dev->mem_end = mem_res->end;
-       len = regs_res->end - regs_res->start;
--      if (!request_mem_region(regs_res->start, len, dev->dev.bus_id)) {
-+      if (!request_mem_region(regs_res->start, len, dev_name(&dev->dev))) {
-               printk(KERN_ERR "%s: Can't request vlynq registers\n",
--                     dev->dev.bus_id);
-+                     dev_name(&dev->dev));
-               result = -ENXIO;
-               goto fail_request;
-       }
-@@ -683,7 +688,7 @@
-       dev->local = ioremap(regs_res->start, len);
-       if (!dev->local) {
-               printk(KERN_ERR "%s: Can't remap vlynq registers\n",
--                     dev->dev.bus_id);
-+                     dev_name(&dev->dev));
-               result = -ENXIO;
-               goto fail_remap;
-       }
-@@ -702,7 +707,7 @@
-       platform_set_drvdata(pdev, dev);
-       printk(KERN_INFO "%s: regs 0x%p, irq %d, mem 0x%p\n",
--             dev->dev.bus_id, (void *)dev->regs_start, dev->irq,
-+             dev_name(&dev->dev), (void *)dev->regs_start, dev->irq,
-              (void *)dev->mem_start);
-       dev->dev_id = 0;
diff --git a/target/linux/ar7/patches/500-serial_kludge.patch b/target/linux/ar7/patches/500-serial_kludge.patch
deleted file mode 100644 (file)
index cc4e424..0000000
+++ /dev/null
@@ -1,40 +0,0 @@
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -286,6 +286,13 @@ static const struct serial8250_config ua
-               .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_10,
-               .flags          = UART_CAP_FIFO,
-       },
-+      [PORT_AR7] = {
-+              .name           = "TI-AR7",
-+              .fifo_size      = 16,
-+              .tx_loadsz      = 16,
-+              .fcr            = UART_FCR_ENABLE_FIFO | UART_FCR_R_TRIG_00,
-+              .flags          = UART_CAP_FIFO | UART_CAP_AFE,
-+      },
- };
- #if defined (CONFIG_SERIAL_8250_AU1X00)
-@@ -2687,7 +2694,11 @@ static void serial8250_console_putchar(s
- {
-       struct uart_8250_port *up = (struct uart_8250_port *)port;
-+#ifdef CONFIG_AR7
-+      wait_for_xmitr(up, BOTH_EMPTY);
-+#else
-       wait_for_xmitr(up, UART_LSR_THRE);
-+#endif
-       serial_out(up, UART_TX, ch);
- }
---- a/include/linux/serial_core.h
-+++ b/include/linux/serial_core.h
-@@ -41,7 +41,8 @@
- #define PORT_XSCALE   15
- #define PORT_RM9000   16      /* PMC-Sierra RM9xxx internal UART */
- #define PORT_OCTEON   17      /* Cavium OCTEON internal UART */
--#define PORT_MAX_8250 17      /* max port ID */
-+#define PORT_AR7      18      /* TI AR7 internal UART */
-+#define PORT_MAX_8250 18      /* max port ID */
- /*
-  * ARM specific type numbers.  These are not currently guaranteed
diff --git a/target/linux/ar7/patches/900-cpmac_multiqueue.patch b/target/linux/ar7/patches/900-cpmac_multiqueue.patch
deleted file mode 100644 (file)
index 3df3d68..0000000
+++ /dev/null
@@ -1,70 +0,0 @@
-This patch fixes the network driver cpmac.c for compilation with
-configuration option CONFIG_NETDEVICES_MULTIQUEUE.
-
-These compiler warnings are fixed by the patch:
-drivers/net/cpmac.c: In function 'cpmac_end_xmit':
-drivers/net/cpmac.c:630: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
-drivers/net/cpmac.c:641: warning: passing argument 2 of 'netif_subqueue_stopped' makes pointer from integer without a cast
-drivers/net/cpmac.c: In function 'cpmac_probe':
-drivers/net/cpmac.c:1128: warning: unused variable 'i'
-
-During runtime, the unpatched driver raises a fatal runtime exception.
-This is fixed by calling __netif_subqueue_stopped instead
-of netif_subqueue_stopped, too.
-
-Two additional code parts were modified for CONFIG_NETDEVICES_MULTIQUEUE
-because other drivers do it in the same way.
-
-        Signed-off-by: Stefan Weil <weil@mail.berlios.de>
-
---- a/drivers/net/cpmac.c
-+++ b/drivers/net/cpmac.c
-@@ -615,13 +615,13 @@ static void cpmac_end_xmit(struct net_de
-               dev_kfree_skb_irq(desc->skb);
-               desc->skb = NULL;
--              if (netif_subqueue_stopped(dev, queue))
-+              if (__netif_subqueue_stopped(dev, queue))
-                       netif_wake_subqueue(dev, queue);
-       } else {
-               if (netif_msg_tx_err(priv) && net_ratelimit())
-                       printk(KERN_WARNING
-                              "%s: end_xmit: spurious interrupt\n", dev->name);
--              if (netif_subqueue_stopped(dev, queue))
-+              if (__netif_subqueue_stopped(dev, queue))
-                       netif_wake_subqueue(dev, queue);
-       }
- }
-@@ -731,7 +731,6 @@ static void cpmac_clear_tx(struct net_de
- static void cpmac_hw_error(struct work_struct *work)
- {
--      int i;
-       struct cpmac_priv *priv =
-               container_of(work, struct cpmac_priv, reset_work);
-@@ -818,7 +817,6 @@ static irqreturn_t cpmac_irq(int irq, vo
- static void cpmac_tx_timeout(struct net_device *dev)
- {
--      int i;
-       struct cpmac_priv *priv = netdev_priv(dev);
-       spin_lock(&priv->lock);
-@@ -1097,7 +1095,7 @@ static int external_switch;
- static int __devinit cpmac_probe(struct platform_device *pdev)
- {
--      int rc, phy_id, i;
-+      int rc, phy_id;
-       char *mdio_bus_id = "0";
-       struct resource *mem;
-       struct cpmac_priv *priv;
-@@ -1125,6 +1123,7 @@ static int __devinit cpmac_probe(struct 
-       }
-       dev = alloc_etherdev_mq(sizeof(*priv), CPMAC_QUEUES);
-+      //~ dev = alloc_etherdev(sizeof(*priv));
-       if (!dev) {
-               printk(KERN_ERR "cpmac: Unable to allocate net_device\n");