--- /dev/null
+#
+# Copyright (C) 2008 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=u-boot
+PKG_VERSION:=2009.11
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(BUILD_VARIANT)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
+PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
+PKG_MD5SUM:=
+PKG_TARGETS:=bin
+
+include $(INCLUDE_DIR)/package.mk
+
+define uboot/Default
+ TITLE:=
+ CONFIG:=
+ IMAGE:=
+endef
+
+define uboot/qi_lb60
+ TITLE:=U-boot for the qi_lb60 board
+endef
+
+define uboot/avt2
+ TITLE:=U-boot for the avt2 board
+endef
+
+define uboot/sakc
+ TITLE:=U-boot for the sakc board
+endef
+
+define uboot/n516
+ TITLE:=U-boot for the N516 e-book reader
+ CONFIG:=n516_nand
+endef
+
+UBOOTS:=qi_lb60 n516 avt2 sakc
+
+define Package/uboot/template
+define Package/uboot-xburst-$(1)
+ SECTION:=boot
+ CATEGORY:=Boot Loaders
+ DEPENDS:=@TARGET_xburst
+ TITLE:=$(2)
+ URL:=http://www.denx.de/wiki/UBoot/WebHome
+ VARIANT:=$(1)
+endef
+endef
+
+define BuildUbootPackage
+ $(eval $(uboot/Default))
+ $(eval $(uboot/$(1)))
+ $(call Package/uboot/template,$(1),$(TITLE))
+endef
+
+
+ifdef BUILD_VARIANT
+$(eval $(call uboot/$(BUILD_VARIANT)))
+UBOOT_CONFIG:=$(if $(CONFIG),$(CONFIG),$(BUILD_VARIANT))
+UBOOT_IMAGE:=$(if $(IMAGE),$(IMAGE),openwrt-$(BOARD)-$(BUILD_BARIANT)-u-boot.bin)
+endif
+
+define Build/Prepare
+ $(call Build/Prepare/Default)
+ $(CP) ./files/* $(PKG_BUILD_DIR)
+ find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
+endef
+
+define Build/Configure
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ $(UBOOT_CONFIG)_config
+endef
+
+define Build/Compile
+ $(MAKE) -C $(PKG_BUILD_DIR) \
+ CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define Package/uboot/install/template
+define Package/uboot-xburst-$(1)/install
+ $(INSTALL_DIR) $$(1)
+ $(CP) $(PKG_BUILD_DIR)/u-boot-nand.bin $(BIN_DIR)/$(2)
+endef
+endef
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call Package/uboot/install/template,$(u),openwrt-$(BOARD)-$(u)-u-boot.bin)) \
+)
+
+$(foreach u,$(UBOOTS), \
+ $(eval $(call BuildUbootPackage,$(u))) \
+ $(eval $(call BuildPackage,uboot-xburst-$(u))) \
+)
--- /dev/null
+#
+# (C) Copyright 2006
+# Ingenic Semiconductor, <jlwei@ingenic.cn>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = $(obj)lib$(BOARD).a
+
+COBJS = $(BOARD).o flash.o
+
+OBJS = $(addprefix $(obj),$(COBJS))
+SOBJS =
+
+$(LIB): $(obj).depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+$(obj).depend: Makefile $(SOBJS:.o=.S) $(COBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(COBJS:.o=.c) > $@
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Ingenic Semiconductor, <jlwei@ingenic.cn>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Hanvon n516 e-book, MIPS32 core
+#
+
+sinclude $(OBJTREE)/board/$(BOARDDIR)/config.tmp
+
+ifndef TEXT_BASE
+# ROM version
+TEXT_BASE = 0x88000000
+
+# RAM version
+#TEXT_BASE = 0x80100000
+endif
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
+
+/*-----------------------------------------------------------------------
+ * flash_init()
+ *
+ * sets up flash_info and returns size of FLASH (bytes)
+ */
+unsigned long flash_init (void)
+{
+ return (0);
+}
+
+int flash_erase (flash_info_t * info, int s_first, int s_last)
+{
+ printf ("flash_erase not implemented\n");
+ return 0;
+}
+
+void flash_print_info (flash_info_t * info)
+{
+ printf ("flash_print_info not implemented\n");
+}
+
+int write_buff (flash_info_t * info, uchar * src, ulong addr, ulong cnt)
+{
+ printf ("write_buff not implemented\n");
+ return (-1);
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/mipsregs.h>
+#include <asm/jz4740.h>
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+
+void _machine_restart(void)
+{
+ __wdt_select_extalclk();
+ __wdt_select_clk_div64();
+ __wdt_set_data(100);
+ __wdt_set_count(0);
+ __tcu_start_wdt_clock();
+ __wdt_start();
+ while(1);
+
+}
+
+static void gpio_init(void)
+{
+
+ REG_GPIO_PXPES(0) = 0xffffffff;
+ REG_GPIO_PXPES(1) = 0xffffffff;
+ REG_GPIO_PXPES(2) = 0xffffffff;
+ REG_GPIO_PXPES(3) = 0xffffffff;
+
+ /*
+ * Initialize NAND Flash Pins
+ */
+ __gpio_as_nand();
+
+ /*
+ * Initialize SDRAM pins
+ */
+ __gpio_as_sdram_32bit();
+
+ /*
+ * Initialize UART0 pins
+ */
+ __gpio_as_uart0();
+
+ /*
+ * Initialize MSC pins
+ */
+ __gpio_as_msc();
+
+ /*
+ * Initialize LCD pins
+ */
+ __gpio_as_lcd_16bit();
+
+ /*
+ * Initialize Other pins
+ */
+ __gpio_as_output(GPIO_SD_VCC_EN_N);
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N);
+
+ __gpio_as_input(GPIO_SD_CD_N);
+ __gpio_disable_pull(GPIO_SD_CD_N);
+
+ __gpio_as_output(GPIO_DISP_OFF_N);
+
+ __gpio_as_output(GPIO_LED_EN);
+ __gpio_set_pin(GPIO_LED_EN);
+
+ __gpio_as_input(127);
+}
+
+static void cpm_init(void)
+{
+ __cpm_stop_ipu();
+ __cpm_stop_cim();
+ __cpm_stop_i2c();
+ __cpm_stop_ssi();
+ __cpm_stop_uart1();
+ __cpm_stop_sadc();
+ __cpm_stop_uhc();
+ __cpm_stop_udc();
+ __cpm_stop_aic1();
+ __cpm_stop_aic2();
+ __cpm_suspend_udcphy();
+ __cpm_suspend_usbphy();
+}
+
+//----------------------------------------------------------------------
+// board early init routine
+
+void board_early_init(void)
+{
+ gpio_init();
+ cpm_init();
+}
+
+//----------------------------------------------------------------------
+// U-Boot common routines
+
+int checkboard (void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ printf("Board: Hanvon n516 e-book (CPU Speed %d MHz)\n",
+ gd->cpu_clk/1000000);
+
+ return 0; /* success */
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+#
+# (C) Copyright 2006
+# Ingenic Semiconductor, <jlwei@ingenic.cn>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o
+SOBJS =
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006 Qi Hardware, Inc.
+# Author: Xiangfu Liu <xiangfu.z@gmail.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# Qi Hardware, Inc. Ben NanoNote (QI_LB60)
+#
+
+ifndef TEXT_BASE
+# ROM version
+# TEXT_BASE = 0x88000000
+
+# RAM version
+TEXT_BASE = 0x80100000
+endif
--- /dev/null
+/*
+ * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/mipsregs.h>
+#include <asm/jz4740.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void gpio_init(void)
+{
+ /*
+ * Initialize NAND Flash Pins
+ */
+ __gpio_as_nand();
+
+ /*
+ * Initialize SDRAM pins
+ */
+ __gpio_as_sdram_32bit();
+
+ /*
+ * Initialize LCD pins
+ */
+ __gpio_as_lcd_18bit();
+
+ /*
+ * Initialize MSC pins
+ */
+ __gpio_as_msc();
+
+ /*
+ * Initialize Other pins
+ */
+ unsigned int i;
+ for (i = 0; i < 7; i++){
+ __gpio_as_input(GPIO_KEYIN_BASE + i);
+ __gpio_enable_pull(GPIO_KEYIN_BASE + i);
+ }
+
+ for (i = 0; i < 8; i++) {
+ __gpio_as_output(GPIO_KEYOUT_BASE + i);
+ __gpio_clear_pin(GPIO_KEYOUT_BASE + i);
+ }
+
+ /*
+ * Initialize UART0 pins, in Ben NanoNote uart0 and keyin8 use the
+ * same gpio, init the gpio as uart0 cause a keyboard bug. so for
+ * end user we disable the uart0
+ */
+ if (__gpio_get_pin(GPIO_KEYIN_BASE + 2) == 0){
+ /* if pressed [S] */
+ printf("[S] pressed, enable UART0\n");
+ gd->boot_option = 5;
+ __gpio_as_uart0();
+ } else {
+ printf("[S] not pressed, disable UART0\n");
+ __gpio_as_input(GPIO_KEYIN_8);
+ __gpio_enable_pull(GPIO_KEYIN_8);
+ }
+
+ __gpio_as_output(GPIO_AUDIO_POP);
+ __gpio_set_pin(GPIO_AUDIO_POP);
+
+ __gpio_as_output(GPIO_LCD_CS);
+ __gpio_clear_pin(GPIO_LCD_CS);
+
+ __gpio_as_output(GPIO_AMP_EN);
+ __gpio_clear_pin(GPIO_AMP_EN);
+
+ __gpio_as_output(GPIO_SDPW_EN);
+ __gpio_disable_pull(GPIO_SDPW_EN);
+ __gpio_clear_pin(GPIO_SDPW_EN);
+
+ __gpio_as_input(GPIO_SD_DETECT);
+ __gpio_disable_pull(GPIO_SD_DETECT);
+
+ __gpio_as_input(GPIO_USB_DETECT);
+ __gpio_enable_pull(GPIO_USB_DETECT);
+
+ if (__gpio_get_pin(GPIO_KEYIN_BASE + 3) == 0) {
+ printf("[M] pressed, boot from sd card\n");
+ gd->boot_option = 1;
+ }
+}
+
+static void cpm_init(void)
+{
+ __cpm_stop_ipu();
+ __cpm_stop_cim();
+ __cpm_stop_i2c();
+ __cpm_stop_ssi();
+ __cpm_stop_uart1();
+ __cpm_stop_sadc();
+ __cpm_stop_uhc();
+ __cpm_stop_udc();
+ __cpm_stop_aic1();
+/* __cpm_stop_aic2();*/
+}
+
+void board_early_init(void)
+{
+ gpio_init();
+ cpm_init();
+}
+
+/* U-Boot common routines */
+
+int checkboard (void)
+{
+
+ printf("Board: Qi LB60 (Ingenic XBurst Jz4740 SoC, Speed %d MHz)\n",
+ gd->cpu_clk/1000000);
+
+ return 0; /* success */
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+#
+# (C) Copyright 2006
+# Ingenic Semiconductor, <jlwei@ingenic.cn>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+
+LIB = lib$(BOARD).a
+
+OBJS = $(BOARD).o
+SOBJS =
+
+$(LIB): .depend $(OBJS) $(SOBJS)
+ $(AR) crv $@ $(OBJS) $(SOBJS)
+
+#########################################################################
+
+.depend: Makefile $(SOBJS:.o=.S) $(OBJS:.o=.c)
+ $(CC) -M $(CFLAGS) $(SOBJS:.o=.S) $(OBJS:.o=.c) > $@
+
+sinclude .depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006 Qi Hardware, Inc.
+# Author: Xiangfu Liu <xiangfu.z@gmail.com>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+#
+# SAKC Board
+#
+
+ifndef TEXT_BASE
+# ROM version
+# TEXT_BASE = 0x88000000
+
+# RAM version
+TEXT_BASE = 0x80100000
+endif
--- /dev/null
+/*
+ * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+#include <common.h>
+#include <command.h>
+#include <asm/mipsregs.h>
+#include <asm/jz4740.h>
+
+DECLARE_GLOBAL_DATA_PTR;
+
+static void gpio_init(void)
+{
+ /*
+ * Initialize NAND Flash Pins
+ */
+ __gpio_as_nand();
+
+ /*
+ * Initialize SDRAM pins
+ */
+ __gpio_as_sdram_16bit_4725();
+
+ /*
+ * Initialize UART0 pins
+ */
+ __gpio_as_uart0();
+
+ /*
+ * Initialize LCD pins
+ */
+ __gpio_as_lcd_18bit();
+
+ /*
+ * Initialize MSC pins
+ */
+ __gpio_as_msc();
+
+ /*
+ * Initialize SSI pins
+ */
+ __gpio_as_ssi();
+
+ /*
+ * Initialize I2C pins
+ */
+ __gpio_as_i2c();
+
+ /*
+ * Initialize MSC pins
+ */
+ __gpio_as_msc();
+
+ /*
+ * Initialize Other pins
+ */
+ __gpio_as_input(GPIO_SD_DETECT);
+ __gpio_disable_pull(GPIO_SD_DETECT);
+}
+/* TODO SAKC
+static void cpm_init(void)
+{
+ __cpm_stop_ipu();
+ __cpm_stop_cim();
+ __cpm_stop_i2c();
+ __cpm_stop_ssi();
+ __cpm_stop_uart1();
+ __cpm_stop_sadc();
+ __cpm_stop_uhc();
+ __cpm_stop_aic1();
+ __cpm_stop_aic2();
+}*/
+
+void board_early_init(void)
+{
+ gpio_init();
+ //cpm_init(); //TODO SAKC
+}
+
+/* U-Boot common routines */
+
+int checkboard (void)
+{
+
+ printf("Board: SAKC (Ingenic XBurst Jz4725 SoC, Speed %d MHz)\n",
+ gd->cpu_clk/1000000);
+
+ return 0; /* success */
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+/*
+ * Jz4740 common routines
+ *
+ * Copyright (c) 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#ifdef CONFIG_JZ4740
+#include <common.h>
+#include <command.h>
+#include <asm/jz4740.h>
+
+extern void board_early_init(void);
+
+/* PLL output clock = EXTAL * NF / (NR * NO)
+ *
+ * NF = FD + 2, NR = RD + 2
+ * NO = 1 (if OD = 0), NO = 2 (if OD = 1 or 2), NO = 4 (if OD = 3)
+ */
+void pll_init(void)
+{
+ register unsigned int cfcr, plcr1;
+ int n2FR[33] = {
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
+ 9
+ };
+ int div[5] = {1, 3, 3, 3, 3}; /* divisors of I:S:P:L:M */
+ int nf, pllout2;
+
+ cfcr = CPM_CPCCR_CLKOEN |
+ CPM_CPCCR_PCS |
+ (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
+ (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
+ (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
+ (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
+ (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
+
+ pllout2 = (cfcr & CPM_CPCCR_PCS) ? CONFIG_SYS_CPU_SPEED : (CONFIG_SYS_CPU_SPEED / 2);
+
+ /* Init USB Host clock, pllout2 must be n*48MHz */
+ REG_CPM_UHCCDR = pllout2 / 48000000 - 1;
+
+ nf = CONFIG_SYS_CPU_SPEED * 2 / CONFIG_SYS_EXTAL;
+ plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
+ (0 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
+ (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
+ (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
+ CPM_CPPCR_PLLEN; /* enable PLL */
+
+ /* init PLL */
+ REG_CPM_CPCCR = cfcr;
+ REG_CPM_CPPCR = plcr1;
+}
+
+void pll_add_test(int new_freq)
+{
+ register unsigned int cfcr, plcr1;
+ int n2FR[33] = {
+ 0, 0, 1, 2, 3, 0, 4, 0, 5, 0, 0, 0, 6, 0, 0, 0,
+ 7, 0, 0, 0, 0, 0, 0, 0, 8, 0, 0, 0, 0, 0, 0, 0,
+ 9
+ };
+ int div[5] = {1, 4, 4, 4, 4}; /* divisors of I:S:P:M:L */
+ int nf, pllout2;
+
+ cfcr = CPM_CPCCR_CLKOEN |
+ (n2FR[div[0]] << CPM_CPCCR_CDIV_BIT) |
+ (n2FR[div[1]] << CPM_CPCCR_HDIV_BIT) |
+ (n2FR[div[2]] << CPM_CPCCR_PDIV_BIT) |
+ (n2FR[div[3]] << CPM_CPCCR_MDIV_BIT) |
+ (n2FR[div[4]] << CPM_CPCCR_LDIV_BIT);
+
+ pllout2 = (cfcr & CPM_CPCCR_PCS) ? new_freq : (new_freq / 2);
+
+ /* Init UHC clock */
+ REG_CPM_UHCCDR = pllout2 / 48000000 - 1;
+
+ /* nf = new_freq * 2 / CONFIG_SYS_EXTAL; */
+ nf = new_freq / 1000000; /* step length is 1M */
+ plcr1 = ((nf - 2) << CPM_CPPCR_PLLM_BIT) | /* FD */
+ (10 << CPM_CPPCR_PLLN_BIT) | /* RD=0, NR=2 */
+ (0 << CPM_CPPCR_PLLOD_BIT) | /* OD=0, NO=1 */
+ (0x20 << CPM_CPPCR_PLLST_BIT) | /* PLL stable time */
+ CPM_CPPCR_PLLEN; /* enable PLL */
+
+ /* init PLL */
+ REG_CPM_CPCCR = cfcr;
+ REG_CPM_CPPCR = plcr1;
+}
+
+void calc_clocks_add_test(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned int pllout;
+ unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ pllout = __cpm_get_pllout();
+
+ gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
+ gd->sys_clk = pllout / div[__cpm_get_hdiv()];
+ gd->per_clk = pllout / div[__cpm_get_pdiv()];
+ gd->mem_clk = pllout / div[__cpm_get_mdiv()];
+ gd->dev_clk = CONFIG_SYS_EXTAL;
+}
+
+void sdram_add_test(int new_freq)
+{
+ register unsigned int dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
+
+ unsigned int cas_latency_sdmr[2] = {
+ EMC_SDMR_CAS_2,
+ EMC_SDMR_CAS_3,
+ };
+
+ unsigned int cas_latency_dmcr[2] = {
+ 1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
+ 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
+ };
+
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ cpu_clk = new_freq;
+ mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
+
+ REG_EMC_RTCSR = EMC_RTCSR_CKS_DISABLE;
+ REG_EMC_RTCOR = 0;
+ REG_EMC_RTCNT = 0;
+
+ /* Basic DMCR register value. */
+ dmcr = ((SDRAM_ROW-11)<<EMC_DMCR_RA_BIT) |
+ ((SDRAM_COL-8)<<EMC_DMCR_CA_BIT) |
+ (SDRAM_BANK4<<EMC_DMCR_BA_BIT) |
+ (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
+ EMC_DMCR_EPIN |
+ cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* SDRAM timimg parameters */
+ ns = 1000000000 / mem_clk;
+
+#if 0
+ tmp = SDRAM_TRAS/ns;
+ if (tmp < 4) tmp = 4;
+ if (tmp > 11) tmp = 11;
+ dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
+
+ tmp = SDRAM_RCD/ns;
+ if (tmp > 3) tmp = 3;
+ dmcr |= (tmp << EMC_DMCR_RCD_BIT);
+
+ tmp = SDRAM_TPC/ns;
+ if (tmp > 7) tmp = 7;
+ dmcr |= (tmp << EMC_DMCR_TPC_BIT);
+
+ tmp = SDRAM_TRWL/ns;
+ if (tmp > 3) tmp = 3;
+ dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
+
+ tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
+ if (tmp > 14) tmp = 14;
+ dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
+#else
+ dmcr |= 0xfffc;
+#endif
+
+ /* First, precharge phase */
+ REG_EMC_DMCR = dmcr;
+
+ /* Set refresh registers */
+ tmp = SDRAM_TREF/ns;
+ tmp = tmp/64 + 1;
+ if (tmp > 0xff) tmp = 0xff;
+
+ REG_EMC_RTCOR = tmp;
+ REG_EMC_RTCSR = EMC_RTCSR_CKS_64; /* Divisor is 64, CKO/64 */
+
+ /* SDRAM mode values */
+ sdmode = EMC_SDMR_BT_SEQ |
+ EMC_SDMR_OM_NORMAL |
+ EMC_SDMR_BL_4 |
+ cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* precharge all chip-selects */
+ REG8(EMC_SDMR0|sdmode) = 0;
+
+ /* wait for precharge, > 200us */
+ tmp = (cpu_clk / 1000000) * 200;
+ while (tmp--);
+
+ /* enable refresh and set SDRAM mode */
+ REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
+
+ /* write sdram mode register for each chip-select */
+ REG8(EMC_SDMR0|sdmode) = 0;
+
+ /* everything is ok now */
+}
+
+void sdram_init(void)
+{
+ register unsigned int dmcr0, dmcr, sdmode, tmp, cpu_clk, mem_clk, ns;
+
+ unsigned int cas_latency_sdmr[2] = {
+ EMC_SDMR_CAS_2,
+ EMC_SDMR_CAS_3,
+ };
+
+ unsigned int cas_latency_dmcr[2] = {
+ 1 << EMC_DMCR_TCL_BIT, /* CAS latency is 2 */
+ 2 << EMC_DMCR_TCL_BIT /* CAS latency is 3 */
+ };
+
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ cpu_clk = CONFIG_SYS_CPU_SPEED;
+ mem_clk = cpu_clk * div[__cpm_get_cdiv()] / div[__cpm_get_mdiv()];
+
+ REG_EMC_BCR = 0; /* Disable bus release */
+ REG_EMC_RTCSR = 0; /* Disable clock for counting */
+
+ /* Fault DMCR value for mode register setting*/
+#define SDRAM_ROW0 11
+#define SDRAM_COL0 8
+#define SDRAM_BANK40 0
+
+ dmcr0 = ((SDRAM_ROW0-11)<<EMC_DMCR_RA_BIT) |
+ ((SDRAM_COL0-8)<<EMC_DMCR_CA_BIT) |
+ (SDRAM_BANK40<<EMC_DMCR_BA_BIT) |
+ (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
+ EMC_DMCR_EPIN |
+ cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* Basic DMCR value */
+ dmcr = ((SDRAM_ROW-11)<<EMC_DMCR_RA_BIT) |
+ ((SDRAM_COL-8)<<EMC_DMCR_CA_BIT) |
+ (SDRAM_BANK4<<EMC_DMCR_BA_BIT) |
+ (SDRAM_BW16<<EMC_DMCR_BW_BIT) |
+ EMC_DMCR_EPIN |
+ cas_latency_dmcr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* SDRAM timimg */
+ ns = 1000000000 / mem_clk;
+ tmp = SDRAM_TRAS/ns;
+ if (tmp < 4) tmp = 4;
+ if (tmp > 11) tmp = 11;
+ dmcr |= ((tmp-4) << EMC_DMCR_TRAS_BIT);
+ tmp = SDRAM_RCD/ns;
+ if (tmp > 3) tmp = 3;
+ dmcr |= (tmp << EMC_DMCR_RCD_BIT);
+ tmp = SDRAM_TPC/ns;
+ if (tmp > 7) tmp = 7;
+ dmcr |= (tmp << EMC_DMCR_TPC_BIT);
+ tmp = SDRAM_TRWL/ns;
+ if (tmp > 3) tmp = 3;
+ dmcr |= (tmp << EMC_DMCR_TRWL_BIT);
+ tmp = (SDRAM_TRAS + SDRAM_TPC)/ns;
+ if (tmp > 14) tmp = 14;
+ dmcr |= (((tmp + 1) >> 1) << EMC_DMCR_TRC_BIT);
+
+ /* SDRAM mode value */
+ sdmode = EMC_SDMR_BT_SEQ |
+ EMC_SDMR_OM_NORMAL |
+ EMC_SDMR_BL_4 |
+ cas_latency_sdmr[((SDRAM_CASL == 3) ? 1 : 0)];
+
+ /* Stage 1. Precharge all banks by writing SDMR with DMCR.MRSET=0 */
+ REG_EMC_DMCR = dmcr;
+ REG8(EMC_SDMR0|sdmode) = 0;
+
+ /* Wait for precharge, > 200us */
+ tmp = (cpu_clk / 1000000) * 1000;
+ while (tmp--);
+
+ /* Stage 2. Enable auto-refresh */
+ REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH;
+
+ tmp = SDRAM_TREF/ns;
+ tmp = tmp/64 + 1;
+ if (tmp > 0xff) tmp = 0xff;
+ REG_EMC_RTCOR = tmp;
+ REG_EMC_RTCNT = 0;
+ REG_EMC_RTCSR = EMC_RTCSR_CKS_64; /* Divisor is 64, CKO/64 */
+
+ /* Wait for number of auto-refresh cycles */
+ tmp = (cpu_clk / 1000000) * 1000;
+ while (tmp--);
+
+ /* Stage 3. Mode Register Set */
+ REG_EMC_DMCR = dmcr0 | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
+ REG8(EMC_SDMR0|sdmode) = 0;
+
+ /* Set back to basic DMCR value */
+ REG_EMC_DMCR = dmcr | EMC_DMCR_RFSH | EMC_DMCR_MRSET;
+
+ /* everything is ok now */
+}
+
+#ifndef CONFIG_NAND_SPL
+
+static void calc_clocks(void)
+{
+ DECLARE_GLOBAL_DATA_PTR;
+
+ unsigned int pllout;
+ unsigned int div[10] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ pllout = __cpm_get_pllout();
+
+ gd->cpu_clk = pllout / div[__cpm_get_cdiv()];
+ gd->sys_clk = pllout / div[__cpm_get_hdiv()];
+ gd->per_clk = pllout / div[__cpm_get_pdiv()];
+ gd->mem_clk = pllout / div[__cpm_get_mdiv()];
+ gd->dev_clk = CONFIG_SYS_EXTAL;
+}
+
+static void rtc_init(void)
+{
+ unsigned long rtcsta;
+
+ while ( !__rtc_write_ready()) ;
+ __rtc_enable_alarm(); /* enable alarm */
+
+ while ( !__rtc_write_ready())
+ ;
+ REG_RTC_RGR = 0x00007fff; /* type value */
+
+ while ( !__rtc_write_ready())
+ ;
+ REG_RTC_HWFCR = 0x0000ffe0; /* Power on delay 2s */
+
+ while ( !__rtc_write_ready())
+ ;
+ REG_RTC_HRCR = 0x00000fe0; /* reset delay 125ms */
+#if 0
+ while ( !__rtc_write_ready())
+ ;
+ rtcsta = REG_RTC_HWRSR;
+ while ( !__rtc_write_ready())
+ ;
+ if (rtcsta & 0x33) {
+ if (rtcsta & 0x10) {
+ while ( !__rtc_write_ready())
+ ;
+ REG_RTC_RSR = 0x0;
+ }
+ while ( !__rtc_write_ready())
+ ;
+ REG_RTC_HWRSR = 0x0;
+ }
+#endif
+}
+
+/*
+ * jz4740 board init routine
+ */
+int jz_board_init(void)
+{
+ board_early_init(); /* init gpio, pll etc. */
+#ifndef CONFIG_NAND_U_BOOT
+ pll_init(); /* init PLL */
+ sdram_init(); /* init sdram memory */
+#endif
+ calc_clocks(); /* calc the clocks */
+ rtc_init(); /* init rtc on any reset: */
+ return 0;
+}
+
+/* U-Boot common routines */
+phys_size_t initdram(int board_type)
+{
+ u32 dmcr;
+ u32 rows, cols, dw, banks;
+ ulong size;
+
+ dmcr = REG_EMC_DMCR;
+ rows = 11 + ((dmcr & EMC_DMCR_RA_MASK) >> EMC_DMCR_RA_BIT);
+ cols = 8 + ((dmcr & EMC_DMCR_CA_MASK) >> EMC_DMCR_CA_BIT);
+ dw = (dmcr & EMC_DMCR_BW) ? 2 : 4;
+ banks = (dmcr & EMC_DMCR_BA) ? 4 : 2;
+
+ size = (1 << (rows + cols)) * dw * banks;
+
+ return size;
+}
+
+/*
+ * Timer routines
+ */
+
+#define TIMER_CHAN 0
+#define TIMER_FDATA 0xffff /* Timer full data value */
+#define TIMER_HZ CONFIG_SYS_HZ
+
+#define READ_TIMER REG_TCU_TCNT(TIMER_CHAN) /* macro to read the 16 bit timer */
+
+static ulong timestamp;
+static ulong lastdec;
+
+void reset_timer_masked (void);
+ulong get_timer_masked (void);
+void udelay_masked (unsigned long usec);
+
+/*
+ * timer without interrupts
+ */
+
+int timer_init(void)
+{
+ REG_TCU_TCSR(TIMER_CHAN) = TCU_TCSR_PRESCALE256 | TCU_TCSR_EXT_EN;
+ REG_TCU_TCNT(TIMER_CHAN) = 0;
+ REG_TCU_TDHR(TIMER_CHAN) = 0;
+ REG_TCU_TDFR(TIMER_CHAN) = TIMER_FDATA;
+
+ REG_TCU_TMSR = (1 << TIMER_CHAN) | (1 << (TIMER_CHAN + 16)); /* mask irqs */
+ REG_TCU_TSCR = (1 << TIMER_CHAN); /* enable timer clock */
+ REG_TCU_TESR = (1 << TIMER_CHAN); /* start counting up */
+
+ lastdec = 0;
+ timestamp = 0;
+
+ return 0;
+}
+
+void reset_timer(void)
+{
+ reset_timer_masked ();
+}
+
+ulong get_timer(ulong base)
+{
+ return get_timer_masked () - base;
+}
+
+void set_timer(ulong t)
+{
+ timestamp = t;
+}
+
+void udelay (unsigned long usec)
+{
+ ulong tmo,tmp;
+
+ /* normalize */
+ if (usec >= 1000) {
+ tmo = usec / 1000;
+ tmo *= TIMER_HZ;
+ tmo /= 1000;
+ }
+ else {
+ if (usec >= 1) {
+ tmo = usec * TIMER_HZ;
+ tmo /= (1000*1000);
+ }
+ else
+ tmo = 1;
+ }
+
+ /* check for rollover during this delay */
+ tmp = get_timer (0);
+ if ((tmp + tmo) < tmp )
+ reset_timer_masked(); /* timer would roll over */
+ else
+ tmo += tmp;
+
+ while (get_timer_masked () < tmo);
+}
+
+void reset_timer_masked (void)
+{
+ /* reset time */
+ lastdec = READ_TIMER;
+ timestamp = 0;
+}
+
+ulong get_timer_masked (void)
+{
+ ulong now = READ_TIMER;
+
+ if (lastdec <= now) {
+ /* normal mode */
+ timestamp += (now - lastdec);
+ } else {
+ /* we have an overflow ... */
+ timestamp += TIMER_FDATA + now - lastdec;
+ }
+ lastdec = now;
+
+ return timestamp;
+}
+
+void udelay_masked (unsigned long usec)
+{
+ ulong tmo;
+ ulong endtime;
+ signed long diff;
+
+ /* normalize */
+ if (usec >= 1000) {
+ tmo = usec / 1000;
+ tmo *= TIMER_HZ;
+ tmo /= 1000;
+ } else {
+ if (usec > 1) {
+ tmo = usec * TIMER_HZ;
+ tmo /= (1000*1000);
+ } else {
+ tmo = 1;
+ }
+ }
+
+ endtime = get_timer_masked () + tmo;
+
+ do {
+ ulong now = get_timer_masked ();
+ diff = endtime - now;
+ } while (diff >= 0);
+}
+
+/*
+ * This function is derived from PowerPC code (read timebase as long long).
+ * On MIPS it just returns the timer value.
+ */
+unsigned long long get_ticks(void)
+{
+ return get_timer(0);
+}
+
+/*
+ * This function is derived from PowerPC code (timebase clock frequency).
+ * On MIPS it returns the number of timer ticks per second.
+ */
+ulong get_tbclk (void)
+{
+ return TIMER_HZ;
+}
+
+#endif /* CONFIG_NAND_SPL */
+
+/* End of timer routine. */
+
+#endif
--- /dev/null
+/*
+ * Platform independend driver for JZ4740.
+ *
+ * Copyright (c) 2007 Ingenic Semiconductor Inc.
+ * Author: <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ */
+#include <common.h>
+
+#if defined(CONFIG_CMD_NAND) && defined(CONFIG_JZ4740)
+
+#include <nand.h>
+#include <asm/jz4740.h>
+#include <asm/io.h>
+
+#define PAR_SIZE 9
+#define __nand_ecc_enable() (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST )
+#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
+
+#define __nand_select_rs_ecc() (REG_EMC_NFECR |= EMC_NFECR_RS)
+
+#define __nand_rs_ecc_encoding() (REG_EMC_NFECR |= EMC_NFECR_RS_ENCODING)
+#define __nand_rs_ecc_decoding() (REG_EMC_NFECR |= EMC_NFECR_RS_DECODING)
+#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
+#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
+
+static void jz_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *this = mtd->priv;
+ unsigned long nandaddr = (unsigned long)this->IO_ADDR_W;
+
+ if (ctrl & NAND_CTRL_CHANGE) {
+ /* Change this to use I/O accessors. */
+ if (ctrl & NAND_NCE)
+ REG_EMC_NFCSR |= EMC_NFCSR_NFCE1;
+ else
+ REG_EMC_NFCSR &= ~EMC_NFCSR_NFCE1;
+ }
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ nandaddr |= 0x00008000;
+ else /* must be ALE */
+ nandaddr |= 0x00010000;
+
+ writeb(cmd, (uint8_t *)nandaddr);
+}
+
+static int jz_device_ready(struct mtd_info *mtd)
+{
+ int ready;
+ udelay(20); /* FIXME: add 20us delay */
+ ready = (REG_GPIO_PXPIN(2) & 0x40000000) ? 1 : 0;
+ return ready;
+}
+
+/*
+ * EMC setup
+ */
+static void jz_device_setup(void)
+{
+ /* Set NFE bit */
+ REG_EMC_NFCSR |= EMC_NFCSR_NFE1;
+ REG_EMC_SMCR1 = 0x094c4400;
+ /* REG_EMC_SMCR3 = 0x04444400; */
+}
+
+void board_nand_select_device(struct nand_chip *nand, int chip)
+{
+ /*
+ * Don't use "chip" to address the NAND device,
+ * generate the cs from the address where it is encoded.
+ */
+}
+
+static int jzsoc_nand_calculate_rs_ecc(struct mtd_info* mtd, const u_char* dat,
+ u_char* ecc_code)
+{
+ volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
+ short i;
+
+ __nand_ecc_encode_sync()
+ __nand_ecc_disable();
+
+ for(i = 0; i < PAR_SIZE; i++)
+ ecc_code[i] = *paraddr++;
+
+ return 0;
+}
+
+static void jzsoc_nand_enable_rs_hwecc(struct mtd_info* mtd, int mode)
+{
+ __nand_ecc_enable();
+ __nand_select_rs_ecc();
+
+ REG_EMC_NFINTS = 0x0;
+ if (NAND_ECC_READ == mode){
+ __nand_rs_ecc_decoding();
+ }
+ if (NAND_ECC_WRITE == mode){
+ __nand_rs_ecc_encoding();
+ }
+}
+
+/* Correct 1~9-bit errors in 512-bytes data */
+static void jzsoc_rs_correct(unsigned char *dat, int idx, int mask)
+{
+ int i;
+
+ idx--;
+
+ i = idx + (idx >> 3);
+ if (i >= 512)
+ return;
+
+ mask <<= (idx & 0x7);
+
+ dat[i] ^= mask & 0xff;
+ if (i < 511)
+ dat[i+1] ^= (mask >> 8) & 0xff;
+}
+
+static int jzsoc_nand_rs_correct_data(struct mtd_info *mtd, u_char *dat,
+ u_char *read_ecc, u_char *calc_ecc)
+{
+ volatile u8 *paraddr = (volatile u8 *)EMC_NFPAR0;
+ short k;
+ u32 stat;
+ /* Set PAR values */
+
+ for (k = 0; k < PAR_SIZE; k++) {
+ *paraddr++ = read_ecc[k];
+ }
+
+ /* Set PRDY */
+ REG_EMC_NFECR |= EMC_NFECR_PRDY;
+
+ /* Wait for completion */
+ __nand_ecc_decode_sync();
+ __nand_ecc_disable();
+
+ /* Check decoding */
+ stat = REG_EMC_NFINTS;
+ if (stat & EMC_NFINTS_ERR) {
+ if (stat & EMC_NFINTS_UNCOR) {
+ printk("Uncorrectable error occurred\n");
+ return -1;
+ }
+ else {
+ u32 errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
+ switch (errcnt) {
+ case 4:
+ jzsoc_rs_correct(dat, (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
+ case 3:
+ jzsoc_rs_correct(dat, (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
+ case 2:
+ jzsoc_rs_correct(dat, (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
+ case 1:
+ jzsoc_rs_correct(dat, (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT, (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT);
+ return 0;
+ default:
+ break;
+ }
+ }
+ }
+ /* no error need to be correct */
+ return 0;
+}
+
+/*
+ * Main initialization routine
+ */
+int board_nand_init(struct nand_chip *nand)
+{
+ jz_device_setup();
+
+ nand->cmd_ctrl = jz_hwcontrol;
+ nand->dev_ready = jz_device_ready;
+
+ /* FIXME: should use NAND_ECC_SOFT */
+ nand->ecc.hwctl = jzsoc_nand_enable_rs_hwecc;
+ nand->ecc.correct = jzsoc_nand_rs_correct_data;
+ nand->ecc.calculate = jzsoc_nand_calculate_rs_ecc;
+ nand->ecc.mode = NAND_ECC_HW;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 9;
+
+ /* 20 us command delay time */
+ nand->chip_delay = 20;
+
+ return 0;
+}
+#endif /* (CONFIG_SYS_CMD_NAND) */
--- /dev/null
+/*
+ * JzRISC lcd controller
+ *
+ * xiangfu liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * Fallowing macro may be used:
+ * CONFIG_LCD : LCD support
+ * LCD_BPP : Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8
+ * CONFIG_LCD_LOGO : show logo
+ */
+
+#include <config.h>
+#include <common.h>
+#include <lcd.h>
+
+#include <asm/io.h> /* virt_to_phys() */
+
+#if defined(CONFIG_LCD) && !defined(CONFIG_SLCD)
+
+#if defined(CONFIG_JZ4740)
+#include <asm/jz4740.h>
+#endif
+
+#include "jz_lcd.h"
+
+
+struct jzfb_info {
+ unsigned int cfg; /* panel mode and pin usage etc. */
+ unsigned int w;
+ unsigned int h;
+ unsigned int bpp; /* bit per pixel */
+ unsigned int fclk; /* frame clk */
+ unsigned int hsw; /* hsync width, in pclk */
+ unsigned int vsw; /* vsync width, in line count */
+ unsigned int elw; /* end of line, in pclk */
+ unsigned int blw; /* begin of line, in pclk */
+ unsigned int efw; /* end of frame, in line count */
+ unsigned int bfw; /* begin of frame, in line count */
+};
+
+static struct jzfb_info jzfb = {
+ #if defined(CONFIG_NANONOTE)
+ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
+ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
+ #endif
+
+};
+
+/************************************************************************/
+
+vidinfo_t panel_info = {
+#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01)
+ 320, 240, LCD_BPP,
+#endif
+};
+
+/*----------------------------------------------------------------------*/
+
+int lcd_line_length;
+
+int lcd_color_fg;
+int lcd_color_bg;
+
+/*
+ * Frame buffer memory information
+ */
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+/*----------------------------------------------------------------------*/
+
+void lcd_ctrl_init (void *lcdbase);
+
+void lcd_enable (void);
+void lcd_disable (void);
+
+/*----------------------------------------------------------------------*/
+
+static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid);
+static void jz_lcd_desc_init(vidinfo_t *vid);
+static int jz_lcd_hw_init( vidinfo_t *vid );
+extern int flush_cache_all(void);
+
+#if LCD_BPP == LCD_COLOR8
+void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue);
+#endif
+#if LCD_BPP == LCD_MONOCHROME
+void lcd_initcolregs (void);
+#endif
+
+/*-----------------------------------------------------------------------*/
+
+void lcd_ctrl_init (void *lcdbase)
+{
+ __lcd_display_pin_init();
+
+ jz_lcd_init_mem(lcdbase, &panel_info);
+ jz_lcd_desc_init(&panel_info);
+ jz_lcd_hw_init(&panel_info);
+
+ __lcd_display_on() ;
+}
+
+/*----------------------------------------------------------------------*/
+#if LCD_BPP == LCD_COLOR8
+void
+lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+#endif
+/*----------------------------------------------------------------------*/
+
+#if LCD_BPP == LCD_MONOCHROME
+static
+void lcd_initcolregs (void)
+{
+}
+#endif
+
+/*
+ * Before enabled lcd controller, lcd registers should be configured correctly.
+ */
+
+void lcd_enable (void)
+{
+ REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */
+ REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/
+}
+
+void lcd_disable (void)
+{
+ REG_LCD_CTRL |= (1<<4); /* LCDCTRL.DIS, regular disable */
+ /* REG_LCD_CTRL |= (1<<3); */ /* LCDCTRL.DIS, quikly disable */
+}
+
+static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
+{
+ u_long palette_mem_size;
+ struct jz_fb_info *fbi = &vid->jz_fb;
+ int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
+
+ fbi->screen = (u_long)lcdbase;
+ fbi->palette_size = 256;
+ palette_mem_size = fbi->palette_size * sizeof(u16);
+
+ debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+ /* locate palette and descs at end of page following fb */
+ fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
+
+ return 0;
+}
+
+static void jz_lcd_desc_init(vidinfo_t *vid)
+{
+ struct jz_fb_info * fbi;
+ fbi = &vid->jz_fb;
+ fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
+ fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
+ fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
+
+ #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
+
+ /* populate descriptors */
+ fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
+ fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
+ fbi->dmadesc_fblow->fidr = 0;
+ fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
+
+ fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */
+
+ fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen);
+ fbi->dmadesc_fbhigh->fidr = 0;
+ fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */
+
+ fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
+ fbi->dmadesc_palette->fidr = 0;
+ fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);
+
+ if( NBITS(vid->vl_bpix) < 12)
+ {
+ /* assume any mode with <12 bpp is palette driven */
+ fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
+ /* flips back and forth between pal and fbhigh */
+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
+ } else {
+ /* palette shouldn't be loaded in true-color mode */
+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
+ }
+
+ flush_cache_all();
+}
+
+static int jz_lcd_hw_init(vidinfo_t *vid)
+{
+ struct jz_fb_info *fbi = &vid->jz_fb;
+ unsigned int val = 0;
+ unsigned int pclk;
+ unsigned int stnH;
+#if defined(CONFIG_MIPS_JZ4740)
+ int pll_div;
+#endif
+
+ /* Setting Control register */
+ switch (jzfb.bpp) {
+ case 1:
+ val |= LCD_CTRL_BPP_1;
+ break;
+ case 2:
+ val |= LCD_CTRL_BPP_2;
+ break;
+ case 4:
+ val |= LCD_CTRL_BPP_4;
+ break;
+ case 8:
+ val |= LCD_CTRL_BPP_8;
+ break;
+ case 15:
+ val |= LCD_CTRL_RGB555;
+ case 16:
+ val |= LCD_CTRL_BPP_16;
+ break;
+#if defined(CONFIG_MIPS_JZ4740)
+ case 17 ... 32:
+ val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */
+ break;
+#endif
+ default:
+ printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp);
+ val |= LCD_CTRL_BPP_16;
+ break;
+ }
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ switch (jzfb.bpp) {
+ case 1:
+ /* val |= LCD_CTRL_PEDN; */
+ case 2:
+ val |= LCD_CTRL_FRC_2;
+ break;
+ case 4:
+ val |= LCD_CTRL_FRC_4;
+ break;
+ case 8:
+ default:
+ val |= LCD_CTRL_FRC_16;
+ break;
+ }
+ break;
+ }
+
+ val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */
+ val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ switch (jzfb.cfg & STN_DAT_PINMASK) {
+#define align2(n) (n)=((((n)+1)>>1)<<1)
+#define align4(n) (n)=((((n)+3)>>2)<<2)
+#define align8(n) (n)=((((n)+7)>>3)<<3)
+ case STN_DAT_PIN1:
+ /* Do not adjust the hori-param value. */
+ break;
+ case STN_DAT_PIN2:
+ align2(jzfb.hsw);
+ align2(jzfb.elw);
+ align2(jzfb.blw);
+ break;
+ case STN_DAT_PIN4:
+ align4(jzfb.hsw);
+ align4(jzfb.elw);
+ align4(jzfb.blw);
+ break;
+ case STN_DAT_PIN8:
+ align8(jzfb.hsw);
+ align8(jzfb.elw);
+ align8(jzfb.blw);
+ break;
+ }
+ break;
+ }
+
+ REG_LCD_CTRL = val;
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
+ stnH = jzfb.h >> 1;
+ else
+ stnH = jzfb.h;
+
+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
+ REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw);
+
+ /* Screen setting */
+ REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw);
+ REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w);
+ REG_LCD_DAV = (0 << 16) | (stnH);
+
+ /* AC BIAs signal */
+ REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw);
+
+ break;
+
+ case MODE_TFT_GEN:
+ case MODE_TFT_SHARP:
+ case MODE_TFT_CASIO:
+ case MODE_TFT_SAMSUNG:
+ case MODE_8BIT_SERIAL_TFT:
+ case MODE_TFT_18BIT:
+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
+ REG_LCD_HSYNC = (0 << 16) | jzfb.hsw;
+#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)
+ REG_LCD_DAV = (0 << 16) | ( jzfb.h );
+#else
+ REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h);
+#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
+ REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w );
+ REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \
+ | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw);
+ break;
+ }
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_TFT_SAMSUNG:
+ {
+ unsigned int total, tp_s, tp_e, ckv_s, ckv_e;
+ unsigned int rev_s, rev_e, inv_s, inv_e;
+
+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+
+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
+ tp_s = jzfb.blw + jzfb.w + 1;
+ tp_e = tp_s + 1;
+ /* ckv_s = tp_s - jz_clocks.pixclk/(1000000000/4100); */
+ ckv_s = tp_s - pclk/(1000000000/4100);
+ ckv_e = tp_s + total;
+ rev_s = tp_s - 11; /* -11.5 clk */
+ rev_e = rev_s + total;
+ inv_s = tp_s;
+ inv_e = inv_s + total;
+ REG_LCD_CLS = (tp_s << 16) | tp_e;
+ REG_LCD_PS = (ckv_s << 16) | ckv_e;
+ REG_LCD_SPL = (rev_s << 16) | rev_e;
+ REG_LCD_REV = (inv_s << 16) | inv_e;
+ jzfb.cfg |= STFT_REVHI | STFT_SPLHI;
+ break;
+ }
+ case MODE_TFT_SHARP:
+ {
+ unsigned int total, cls_s, cls_e, ps_s, ps_e;
+ unsigned int spl_s, spl_e, rev_s, rev_e;
+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
+#if !defined(CONFIG_JZLCD_INNOLUX_AT080TN42)
+ spl_s = 1;
+ spl_e = spl_s + 1;
+ cls_s = 0;
+ cls_e = total - 60; /* > 4us (pclk = 80ns) */
+ ps_s = cls_s;
+ ps_e = cls_e;
+ rev_s = total - 40; /* > 3us (pclk = 80ns) */
+ rev_e = rev_s + total;
+ jzfb.cfg |= STFT_PSHI;
+#else /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
+ spl_s = total - 5; /* LD */
+ spl_e = total -3;
+ cls_s = 32; /* CKV */
+ cls_e = 145;
+ ps_s = 0; /* OEV */
+ ps_e = 45;
+ rev_s = 0; /* POL */
+ rev_e = 0;
+#endif /*#if defined(CONFIG_JZLCD_INNOLUX_AT080TN42)*/
+ REG_LCD_SPL = (spl_s << 16) | spl_e;
+ REG_LCD_CLS = (cls_s << 16) | cls_e;
+ REG_LCD_PS = (ps_s << 16) | ps_e;
+ REG_LCD_REV = (rev_s << 16) | rev_e;
+ break;
+ }
+ case MODE_TFT_CASIO:
+ break;
+ }
+
+ /* Configure the LCD panel */
+ REG_LCD_CFG = jzfb.cfg;
+
+ /* Timing setting */
+ __cpm_stop_lcd();
+
+ val = jzfb.fclk; /* frame clk */
+ if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) {
+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+ }
+ else {
+ /* serial mode: Hsync period = 3*Width_Pixel */
+ pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+ }
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
+ pclk = (pclk * 3);
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4);
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ pclk >>= 1;
+
+ pll_div = ( REG_CPM_CPCCR & CPM_CPCCR_PCS ); /* clock source,0:pllout/2 1: pllout */
+ pll_div = pll_div ? 1 : 2 ;
+ val = ( __cpm_get_pllout()/pll_div ) / pclk;
+ val--;
+ if ( val > 0x1ff ) {
+ printf("CPM_LPCDR too large, set it to 0x1ff\n");
+ val = 0x1ff;
+ }
+ __cpm_set_pixdiv(val);
+
+ val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */
+ if ( val > 150000000 ) {
+ printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val);
+ printf("Change LCDClock to 150MHz\n");
+ val = 150000000;
+ }
+ val = ( __cpm_get_pllout()/pll_div ) / val;
+ val--;
+ if ( val > 0x1f ) {
+ printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n");
+ val = 0x1f;
+ }
+ __cpm_set_ldiv( val );
+ REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */
+
+ __cpm_start_lcd();
+ udelay(1000);
+
+ REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/
+
+ return 0;
+}
+
--- /dev/null
+/*
+ * JzRISC lcd controller
+ *
+ * xiangfu liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __JZLCD_H__
+#define __JZLCD_H__
+
+#include <asm/io.h>
+/*
+ * change u-boot macro to celinux macro
+ */
+/* Chip type */
+#if defined(CONFIG_JZ4740)
+#define CONFIG_MIPS_JZ4740 1
+#endif
+
+/* board type */
+#if defined(CONFIG_NANONOTE)
+#define CONFIG_MIPS_JZ4740_PI 1
+#endif
+
+#define mdelay(n) udelay((n)*1000)
+
+/*
+ * change u-boot macro to celinux macro
+ */
+
+#define NR_PALETTE 256
+
+struct lcd_desc{
+ unsigned int next_desc; /* LCDDAx */
+ unsigned int databuf; /* LCDSAx */
+ unsigned int frame_id; /* LCDFIDx */
+ unsigned int cmd; /* LCDCMDx */
+};
+
+#define MODE_MASK 0x0f
+#define MODE_TFT_GEN 0x00
+#define MODE_TFT_SHARP 0x01
+#define MODE_TFT_CASIO 0x02
+#define MODE_TFT_SAMSUNG 0x03
+#define MODE_CCIR656_NONINT 0x04
+#define MODE_CCIR656_INT 0x05
+#define MODE_STN_COLOR_SINGLE 0x08
+#define MODE_STN_MONO_SINGLE 0x09
+#define MODE_STN_COLOR_DUAL 0x0a
+#define MODE_STN_MONO_DUAL 0x0b
+#define MODE_8BIT_SERIAL_TFT 0x0c
+
+#define MODE_TFT_18BIT (1<<7)
+
+#define STN_DAT_PIN1 (0x00 << 4)
+#define STN_DAT_PIN2 (0x01 << 4)
+#define STN_DAT_PIN4 (0x02 << 4)
+#define STN_DAT_PIN8 (0x03 << 4)
+#define STN_DAT_PINMASK STN_DAT_PIN8
+
+#define STFT_PSHI (1 << 15)
+#define STFT_CLSHI (1 << 14)
+#define STFT_SPLHI (1 << 13)
+#define STFT_REVHI (1 << 12)
+
+#define SYNC_MASTER (0 << 16)
+#define SYNC_SLAVE (1 << 16)
+
+#define DE_P (0 << 9)
+#define DE_N (1 << 9)
+
+#define PCLK_P (0 << 10)
+#define PCLK_N (1 << 10)
+
+#define HSYNC_P (0 << 11)
+#define HSYNC_N (1 << 11)
+
+#define VSYNC_P (0 << 8)
+#define VSYNC_N (1 << 8)
+
+#define DATA_NORMAL (0 << 17)
+#define DATA_INVERSE (1 << 17)
+
+
+/* Jz LCDFB supported I/O controls. */
+#define FBIOSETBACKLIGHT 0x4688
+#define FBIODISPON 0x4689
+#define FBIODISPOFF 0x468a
+#define FBIORESET 0x468b
+#define FBIOPRINT_REG 0x468c
+
+/*
+ * LCD panel specific definition
+ */
+
+#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) || defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
+
+#if defined(CONFIG_JZLCD_FOXCONN_PT035TN01) /* board pmp */
+#define MODE 0xcd /* 24bit parellel RGB */
+#endif
+#if defined(CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL)
+#define MODE 0xc9 /* 8bit serial RGB */
+#endif
+
+#if defined(CONFIG_MIPS_JZ4740_PI) /* board pavo */
+ #define SPEN (32*2+21) /*LCD_SPL */
+ #define SPCK (32*2+23) /*LCD_CLS */
+ #define SPDA (32*2+22) /*LCD_D12 */
+ #define LCD_RET (32*3+27)
+#else
+#error "cpu/misp/Jzlcd.h, please define SPI pins on your board."
+#endif
+
+ #define __spi_write_reg1(reg, val) \
+ do { \
+ unsigned char no;\
+ unsigned short value;\
+ unsigned char a=0;\
+ unsigned char b=0;\
+ a=reg;\
+ b=val;\
+ __gpio_set_pin(SPEN);\
+ __gpio_set_pin(SPCK);\
+ __gpio_clear_pin(SPDA);\
+ __gpio_clear_pin(SPEN);\
+ udelay(25);\
+ value=((a<<8)|(b&0xFF));\
+ for(no=0;no<16;no++)\
+ {\
+ __gpio_clear_pin(SPCK);\
+ if((value&0x8000)==0x8000)\
+ __gpio_set_pin(SPDA);\
+ else\
+ __gpio_clear_pin(SPDA);\
+ udelay(25);\
+ __gpio_set_pin(SPCK);\
+ value=(value<<1); \
+ udelay(25);\
+ }\
+ __gpio_set_pin(SPEN);\
+ udelay(100);\
+ } while (0)
+
+ #define __spi_write_reg(reg, val) \
+ do {\
+ __spi_write_reg1((reg<<2|2), val);\
+ udelay(100); \
+ }while(0)
+
+
+ #define __lcd_special_pin_init() \
+ do { \
+ __gpio_as_output(SPEN); /* use SPDA */\
+ __gpio_as_output(SPCK); /* use SPCK */\
+ __gpio_as_output(SPDA); /* use SPDA */\
+ __gpio_as_output(LCD_RET);\
+ } while (0)
+
+#if defined(CONFIG_NANONOTE)
+ #define __lcd_special_on() \
+ do { \
+ udelay(50);\
+ __spi_write_reg1(0x05, 0x16); \
+ __spi_write_reg1(0x04, 0x0b); \
+ __spi_write_reg1(0x07, 0x8d); \
+ __spi_write_reg1(0x01, 0x95); \
+ __spi_write_reg1(0x08, 0xc0); \
+ __spi_write_reg1(0x03, 0x40); \
+ __spi_write_reg1(0x06, 0x15); \
+ __spi_write_reg1(0x05, 0xd7); \
+ } while (0) /* reg 0x0a is control the display direction:DB0->horizontal level DB1->vertical level */
+
+ #define __lcd_special_off() \
+ do { \
+ __spi_write_reg1(0x05, 0x5e); \
+ } while (0)
+#endif /* CONFIG_NANONOTE */
+#endif /* CONFIG_JZLCD_FOXCONN_PT035TN01 or CONFIG_JZLCD_INNOLUX_PT035TN01_SERIAL */
+
+#ifndef __lcd_special_pin_init
+#define __lcd_special_pin_init()
+#endif
+#ifndef __lcd_special_on
+#define __lcd_special_on()
+#endif
+#ifndef __lcd_special_off
+#define __lcd_special_off()
+#endif
+
+
+/*
+ * Platform specific definition
+ */
+
+#if defined(CONFIG_MIPS_JZ4740_PI)
+
+ /* 100 level: 0,1,...,100 */
+ #define __lcd_set_backlight_level(n)\
+ do { \
+ __gpio_as_output(32*3+27); \
+ __gpio_set_pin(32*3+27); \
+ } while (0)
+
+ #define __lcd_close_backlight() \
+ do { \
+ __gpio_as_output(GPIO_PWM); \
+ __gpio_clear_pin(GPIO_PWM); \
+ } while (0)
+
+ #define __lcd_display_pin_init() \
+ do { \
+ __gpio_as_output(GPIO_DISP_OFF_N); \
+ __cpm_start_tcu(); \
+ __lcd_special_pin_init(); \
+ } while (0)
+ /* __lcd_set_backlight_level(100); \*/
+ #define __lcd_display_on() \
+ do { \
+ __gpio_set_pin(GPIO_DISP_OFF_N); \
+ __lcd_special_on(); \
+ } while (0)
+
+ #define __lcd_display_off() \
+ do { \
+ __lcd_special_off(); \
+ __gpio_clear_pin(GPIO_DISP_OFF_N); \
+ } while (0)
+
+#endif /* CONFIG_MIPS_JZ4740_PI) */
+
+/*****************************************************************************
+ * LCD display pin dummy macros
+ *****************************************************************************/
+#ifndef __lcd_display_pin_init
+#define __lcd_display_pin_init()
+#endif
+#ifndef __lcd_display_on
+#define __lcd_display_on()
+#endif
+#ifndef __lcd_display_off
+#define __lcd_display_off()
+#endif
+#ifndef __lcd_set_backlight_level
+#define __lcd_set_backlight_level(n)
+#endif
+
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+
+#if defined CONFIG_JZ4740
+#include <asm-mips/jz4740.h>
+
+#include "jz_mmc.h"
+
+#define CFG_MMC_BASE 0x80600000
+static int sd2_0 = 0;
+
+/*
+ * GPIO definition
+ */
+#if defined(CONFIG_SAKC)
+
+#define __msc_init_io() \
+do { \
+ __gpio_as_input(GPIO_SD_CD_N); \
+} while (0)
+
+#else
+#define __msc_init_io() \
+do { \
+ __gpio_as_output(GPIO_SD_VCC_EN_N); \
+ __gpio_as_input(GPIO_SD_CD_N); \
+} while (0)
+
+#define __msc_enable_power() \
+do { \
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#define __msc_disable_power() \
+do { \
+ __gpio_set_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#endif /* CONFIG_SAKE */
+
+#define __msc_card_detected() \
+({ \
+ int detected = 1; \
+ __gpio_as_input(GPIO_SD_CD_N); \
+ __gpio_disable_pull(GPIO_SD_CD_N); \
+ if (!__gpio_get_pin(GPIO_SD_CD_N)) \
+ detected = 0; \
+ detected; \
+})
+
+/*
+ * Local functions
+ */
+
+#ifdef CONFIG_MMC
+extern int
+fat_register_device(block_dev_desc_t *dev_desc, int part_no);
+
+static block_dev_desc_t mmc_dev;
+
+block_dev_desc_t * mmc_get_dev(int dev)
+{
+ return ((block_dev_desc_t *)&mmc_dev);
+}
+
+/*
+ * FIXME needs to read cid and csd info to determine block size
+ * and other parameters
+ */
+static uchar mmc_buf[MMC_BLOCK_SIZE];
+static int mmc_ready = 0;
+static mmc_csd_t mmc_csd;
+static int use_4bit; /* Use 4-bit data bus */
+/*
+ * MMC Events
+ */
+#define MMC_EVENT_NONE 0x00 /* No events */
+#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */
+#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */
+#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */
+
+
+#define MMC_IRQ_MASK() \
+do { \
+ REG_MSC_IMASK = 0xffff; \
+ REG_MSC_IREG = 0xffff; \
+} while (0)
+
+/* Stop the MMC clock and wait while it happens */
+static inline int jz_mmc_stop_clock(void)
+{
+ int timeout = 1000;
+
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
+
+ while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
+ timeout--;
+ if (timeout == 0) {
+ return MMC_ERROR_TIMEOUT;
+ }
+ udelay(1);
+ }
+ return MMC_NO_ERROR;
+}
+
+/* Start the MMC clock and operation */
+static inline int jz_mmc_start_clock(void)
+{
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
+ return MMC_NO_ERROR;
+}
+
+static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
+{
+ u32 clkrt;
+ u32 clk_src = is_sd ? 24000000: 16000000;
+
+ clkrt = 0;
+ while (rate < clk_src)
+ {
+ clkrt ++;
+ clk_src >>= 1;
+ }
+ return clkrt;
+}
+
+/* Set the MMC clock frequency */
+void jz_mmc_set_clock(int sd, u32 rate)
+{
+ jz_mmc_stop_clock();
+
+ /* Select clock source of MSC */
+ __cpm_select_msc_clk(sd);
+
+ /* Set clock dividor of MSC */
+ REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
+}
+
+static int jz_mmc_check_status(struct mmc_request *request)
+{
+ u32 status = REG_MSC_STAT;
+
+ /* Checking for response or data timeout */
+ if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
+ printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
+ return MMC_ERROR_TIMEOUT;
+ }
+
+ /* Checking for CRC error */
+ if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
+ printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
+ return MMC_ERROR_CRC;
+ }
+
+ return MMC_NO_ERROR;
+}
+
+/* Obtain response to the command and store it to response buffer */
+static void jz_mmc_get_response(struct mmc_request *request)
+{
+ int i;
+ u8 *buf;
+ u32 data;
+
+ DEBUG(3, "fetch response for request %d, cmd %d\n", request->rtype, request->cmd);
+
+ buf = request->response;
+ request->result = MMC_NO_ERROR;
+
+ switch (request->rtype) {
+ case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
+ case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
+ {
+ data = REG_MSC_RES;
+ buf[0] = (data >> 8) & 0xff;
+ buf[1] = data & 0xff;
+ data = REG_MSC_RES;
+ buf[2] = (data >> 8) & 0xff;
+ buf[3] = data & 0xff;
+ data = REG_MSC_RES;
+ buf[4] = data & 0xff;
+
+ DEBUG(3, "request %d, response [%02x %02x %02x %02x %02x]\n",
+ request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
+ break;
+ }
+ case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
+ {
+ for (i = 0; i < 16; i += 2) {
+ data = REG_MSC_RES;
+ buf[i] = (data >> 8) & 0xff;
+ buf[i+1] = data & 0xff;
+ }
+ DEBUG(3, "request %d, response [", request->rtype);
+#if CONFIG_MMC_DEBUG_VERBOSE > 2
+ if (g_mmc_debug >= 3) {
+ int n;
+ for (n = 0; n < 17; n++)
+ printk("%02x ", buf[n]);
+ printk("]\n");
+ }
+#endif
+ break;
+ }
+ case RESPONSE_NONE:
+ DEBUG(3, "No response\n");
+ break;
+
+ default:
+ DEBUG(3, "unhandled response type for request %d\n", request->rtype);
+ break;
+ }
+}
+
+static int jz_mmc_receive_data(struct mmc_request *req)
+{
+ u32 stat, timeout, data, cnt;
+ u8 *buf = req->buffer;
+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+
+ timeout = 0x3ffffff;
+
+ while (timeout) {
+ timeout--;
+ stat = REG_MSC_STAT;
+
+ if (stat & MSC_STAT_TIME_OUT_READ)
+ return MMC_ERROR_TIMEOUT;
+ else if (stat & MSC_STAT_CRC_READ_ERROR)
+ return MMC_ERROR_CRC;
+ else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
+ || (stat & MSC_STAT_DATA_FIFO_AFULL)) {
+ /* Ready to read data */
+ break;
+ }
+ udelay(1);
+ }
+ if (!timeout)
+ return MMC_ERROR_TIMEOUT;
+
+ /* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
+ cnt = wblocklen;
+ while (cnt) {
+ data = REG_MSC_RXFIFO;
+ {
+ *buf++ = (u8)(data >> 0);
+ *buf++ = (u8)(data >> 8);
+ *buf++ = (u8)(data >> 16);
+ *buf++ = (u8)(data >> 24);
+ }
+ cnt --;
+ while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
+ ;
+ }
+ return MMC_NO_ERROR;
+}
+
+static int jz_mmc_transmit_data(struct mmc_request *req)
+{
+#if 0
+ u32 nob = req->nob;
+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+ u8 *buf = req->buffer;
+ u32 *wbuf = (u32 *)buf;
+ u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
+ u32 stat, timeout, data, cnt;
+
+ for (nob; nob >= 1; nob--) {
+ timeout = 0x3FFFFFF;
+
+ while (timeout) {
+ timeout--;
+ stat = REG_MSC_STAT;
+
+ if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
+ return MMC_ERROR_CRC;
+ else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
+ /* Ready to write data */
+ break;
+ }
+
+ udelay(1);
+ }
+
+ if (!timeout)
+ return MMC_ERROR_TIMEOUT;
+
+ /* Write data to TXFIFO */
+ cnt = wblocklen;
+ while (cnt) {
+ while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
+ ;
+
+ if (waligned) {
+ REG_MSC_TXFIFO = *wbuf++;
+ }
+ else {
+ data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
+ REG_MSC_TXFIFO = data;
+ }
+
+ cnt--;
+ }
+ }
+#endif
+ return MMC_NO_ERROR;
+}
+
+
+/*
+ * Name: int jz_mmc_exec_cmd()
+ * Function: send command to the card, and get a response
+ * Input: struct mmc_request *req : MMC/SD request
+ * Output: 0: right >0: error code
+ */
+int jz_mmc_exec_cmd(struct mmc_request *request)
+{
+ u32 cmdat = 0, events = 0;
+ int retval, timeout = 0x3fffff;
+
+ /* Indicate we have no result yet */
+ request->result = MMC_NO_RESPONSE;
+ if (request->cmd == MMC_CIM_RESET) {
+ /* On reset, 1-bit bus width */
+ use_4bit = 0;
+
+ /* Reset MMC/SD controller */
+ __msc_reset();
+
+ /* On reset, drop MMC clock down */
+ jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
+
+ /* On reset, stop MMC clock */
+ jz_mmc_stop_clock();
+ }
+ if (request->cmd == MMC_SEND_OP_COND) {
+ DEBUG(3, "Have an MMC card\n");
+ /* always use 1bit for MMC */
+ use_4bit = 0;
+ }
+ if (request->cmd == SET_BUS_WIDTH) {
+ if (request->arg == 0x2) {
+ printf("Use 4-bit bus width\n");
+ use_4bit = 1;
+ }
+ else {
+ printf("Use 1-bit bus width\n");
+ use_4bit = 0;
+ }
+ }
+
+ /* stop clock */
+ jz_mmc_stop_clock();
+
+ /* mask all interrupts */
+ REG_MSC_IMASK = 0xffff;
+
+ /* clear status */
+ REG_MSC_IREG = 0xffff;
+
+ /* use 4-bit bus width when possible */
+ if (use_4bit)
+ cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
+
+ /* Set command type and events */
+ switch (request->cmd) {
+ /* MMC core extra command */
+ case MMC_CIM_RESET:
+ cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
+ break;
+
+ /* bc - broadcast - no response */
+ case MMC_GO_IDLE_STATE:
+ case MMC_SET_DSR:
+ break;
+
+ /* bcr - broadcast with response */
+ case MMC_SEND_OP_COND:
+ case MMC_ALL_SEND_CID:
+ case MMC_GO_IRQ_STATE:
+ break;
+
+ /* adtc - addressed with data transfer */
+ case MMC_READ_DAT_UNTIL_STOP:
+ case MMC_READ_SINGLE_BLOCK:
+ case MMC_READ_MULTIPLE_BLOCK:
+ case SEND_SCR:
+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
+ events = MMC_EVENT_RX_DATA_DONE;
+ break;
+
+ case MMC_WRITE_DAT_UNTIL_STOP:
+ case MMC_WRITE_BLOCK:
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ case MMC_PROGRAM_CID:
+ case MMC_PROGRAM_CSD:
+ case MMC_SEND_WRITE_PROT:
+ case MMC_GEN_CMD:
+ case MMC_LOCK_UNLOCK:
+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
+ events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
+
+ break;
+
+ case MMC_STOP_TRANSMISSION:
+ events = MMC_EVENT_PROG_DONE;
+ break;
+
+ /* ac - no data transfer */
+ default:
+ break;
+ }
+
+ /* Set response type */
+ switch (request->rtype) {
+ case RESPONSE_NONE:
+ break;
+
+ case RESPONSE_R1B:
+ cmdat |= MSC_CMDAT_BUSY;
+ /*FALLTHRU*/
+ case RESPONSE_R1:
+ cmdat |= MSC_CMDAT_RESPONSE_R1;
+ break;
+ case RESPONSE_R2_CID:
+ case RESPONSE_R2_CSD:
+ cmdat |= MSC_CMDAT_RESPONSE_R2;
+ break;
+ case RESPONSE_R3:
+ cmdat |= MSC_CMDAT_RESPONSE_R3;
+ break;
+ case RESPONSE_R4:
+ cmdat |= MSC_CMDAT_RESPONSE_R4;
+ break;
+ case RESPONSE_R5:
+ cmdat |= MSC_CMDAT_RESPONSE_R5;
+ break;
+ case RESPONSE_R6:
+ cmdat |= MSC_CMDAT_RESPONSE_R6;
+ break;
+ default:
+ break;
+ }
+
+ /* Set command index */
+ if (request->cmd == MMC_CIM_RESET) {
+ REG_MSC_CMD = MMC_GO_IDLE_STATE;
+ } else {
+ REG_MSC_CMD = request->cmd;
+ }
+
+ /* Set argument */
+ REG_MSC_ARG = request->arg;
+
+ /* Set block length and nob */
+ if (request->cmd == SEND_SCR) { /* get SCR from DataFIFO */
+ REG_MSC_BLKLEN = 8;
+ REG_MSC_NOB = 1;
+ } else {
+ REG_MSC_BLKLEN = request->block_len;
+ REG_MSC_NOB = request->nob;
+ }
+
+ /* Set command */
+ REG_MSC_CMDAT = cmdat;
+
+ DEBUG(1, "Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
+ cmdat, request->arg, request->rtype);
+
+ /* Start MMC/SD clock and send command to card */
+ jz_mmc_start_clock();
+
+ /* Wait for command completion */
+ while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
+ ;
+
+ if (timeout == 0)
+ return MMC_ERROR_TIMEOUT;
+
+ REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
+
+ /* Check for status */
+ retval = jz_mmc_check_status(request);
+ if (retval) {
+ return retval;
+ }
+
+ /* Complete command with no response */
+ if (request->rtype == RESPONSE_NONE) {
+ return MMC_NO_ERROR;
+ }
+
+ /* Get response */
+ jz_mmc_get_response(request);
+
+ /* Start data operation */
+ if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
+ if (events & MMC_EVENT_RX_DATA_DONE) {
+ if (request->cmd == SEND_SCR) {
+ /* SD card returns SCR register as data.
+ MMC core expect it in the response buffer,
+ after normal response. */
+ request->buffer = (u8 *)((u32)request->response + 5);
+ }
+ jz_mmc_receive_data(request);
+ }
+
+ if (events & MMC_EVENT_TX_DATA_DONE) {
+ jz_mmc_transmit_data(request);
+ }
+
+ /* Wait for Data Done */
+ while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
+ ;
+ REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
+ }
+
+ /* Wait for Prog Done event */
+ if (events & MMC_EVENT_PROG_DONE) {
+ while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
+ ;
+ REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
+ }
+
+ /* Command completed */
+
+ return MMC_NO_ERROR; /* return successfully */
+}
+
+int mmc_block_read(u8 *dst, ulong src, ulong len)
+{
+
+ struct mmc_request request;
+ struct mmc_response_r1 r1;
+ int retval;
+
+ if (len == 0) {
+ return 0;
+ }
+ mmc_simple_cmd(&request, MMC_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
+ retval = mmc_unpack_r1(&request, &r1, 0);
+ if (retval && (retval != MMC_ERROR_STATE_MISMATCH)) {
+ return retval;
+ }
+
+ mmc_simple_cmd(&request, MMC_SET_BLOCKLEN, len, RESPONSE_R1);
+ if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
+ return retval;
+ }
+
+ if (sd2_0)
+ src /= len;
+
+ mmc_send_cmd(&request, MMC_READ_SINGLE_BLOCK, src, 1,len, RESPONSE_R1, dst);
+ if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
+ return retval;
+ }
+ return retval;
+}
+
+int mmc_block_write(ulong dst, uchar *src, int len)
+{
+ return 0;
+}
+
+int mmc_read(ulong src, uchar *dst, int size)
+{
+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
+ ulong mmc_block_size, mmc_block_address;
+
+ if (size == 0) {
+ return 0;
+ }
+
+ if (!mmc_ready) {
+ printf("MMC card is not ready\n");
+ return -1;
+ }
+
+ mmc_block_size = MMC_BLOCK_SIZE;
+ mmc_block_address = ~(mmc_block_size - 1);
+
+ src -= CFG_MMC_BASE;
+ end = src + size;
+ part_start = ~mmc_block_address & src;
+ part_end = ~mmc_block_address & end;
+ aligned_start = mmc_block_address & src;
+ aligned_end = mmc_block_address & end;
+ /* all block aligned accesses */
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_start) {
+ part_len = mmc_block_size - part_start;
+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(dst, mmc_buf+part_start, part_len);
+ dst += part_len;
+ src += part_len;
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+
+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+
+ if (part_end && src < end) {
+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(dst, mmc_buf, part_end);
+ }
+ return 0;
+
+}
+
+int mmc_write(uchar *src, ulong dst, int size)
+{
+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
+ ulong mmc_block_size, mmc_block_address;
+
+ if (size == 0) {
+ return 0;
+ }
+
+ if (!mmc_ready) {
+ printf("MMC card is not ready\n");
+ return -1;
+ }
+
+ mmc_block_size = MMC_BLOCK_SIZE;
+ mmc_block_address = ~(mmc_block_size - 1);
+
+ dst -= CFG_MMC_BASE;
+ end = dst + size;
+ part_start = ~mmc_block_address & dst;
+ part_end = ~mmc_block_address & end;
+ aligned_start = mmc_block_address & dst;
+ aligned_end = mmc_block_address & end;
+
+ /* all block aligned accesses */
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_start) {
+ part_len = mmc_block_size - part_start;
+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(mmc_buf+part_start, src, part_len);
+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
+ return -1;
+ }
+ dst += part_len;
+ src += part_len;
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_end && dst < end) {
+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(mmc_buf, src, part_end);
+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
+{
+ ulong src;
+ int mmc_block_size = MMC_BLOCK_SIZE;
+
+ src = blknr * mmc_block_size + CFG_MMC_BASE;
+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
+ return blkcnt;
+}
+
+int mmc_select_card(void)
+{
+ struct mmc_request request;
+ struct mmc_response_r1 r1;
+ int retval;
+
+ mmc_simple_cmd(&request, MMC_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
+ retval = mmc_unpack_r1(&request, &r1, 0);
+ if (retval) {
+ return retval;
+ }
+
+ if (mmcinfo.sd) {
+ mmc_simple_cmd(&request, MMC_APP_CMD, mmcinfo.rca, RESPONSE_R1);
+ retval = mmc_unpack_r1(&request,&r1,0);
+ if (retval) {
+ return retval;
+ }
+#if defined(MMC_BUS_WIDTH_1BIT)
+ mmc_simple_cmd(&request, SET_BUS_WIDTH, 1, RESPONSE_R1);
+#else
+ mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
+#endif
+ retval = mmc_unpack_r1(&request,&r1,0);
+ if (retval) {
+ return retval;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Configure card
+ */
+static void mmc_configure_card(void)
+{
+ u32 rate;
+
+ /* Get card info */
+ if (sd2_0)
+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
+ else
+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
+
+ mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
+
+ /* Fix the clock rate */
+ rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
+ if (rate < MMC_CLOCK_SLOW)
+ rate = MMC_CLOCK_SLOW;
+ if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
+ rate = MMC_CLOCK_FAST;
+ if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
+ rate = SD_CLOCK_FAST;
+
+ DEBUG(2,"mmc_configure_card: block_len=%d block_num=%d rate=%d\n", mmcinfo.block_len, mmcinfo.block_num, rate);
+
+ jz_mmc_set_clock(mmcinfo.sd, rate);
+}
+
+/*
+ * State machine routines to initialize card(s)
+ */
+
+/*
+ CIM_SINGLE_CARD_ACQ (frequency at 400 kHz)
+ --- Must enter from GO_IDLE_STATE ---
+ 1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
+ 2. SEND_OP_COND (Full Range) [CMD1] {optional}
+ 3. SEND_OP_COND (Set Range ) [CMD1]
+ If busy, delay and repeat step 2
+ 4. ALL_SEND_CID [CMD2]
+ If timeout, set an error (no cards found)
+ 5. SET_RELATIVE_ADDR [CMD3]
+ 6. SEND_CSD [CMD9]
+ 7. SET_DSR [CMD4] Only call this if (csd.dsr_imp).
+ 8. Set clock frequency (check available in csd.tran_speed)
+ */
+
+#define MMC_INIT_DOING 0
+#define MMC_INIT_PASSED 1
+#define MMC_INIT_FAILED 2
+
+static int mmc_init_card_state(struct mmc_request *request)
+{
+ struct mmc_response_r1 r1;
+ struct mmc_response_r3 r3;
+ int retval;
+ int ocr = 0x40300000;
+ int limit_41 = 0;
+
+ DEBUG(2,"mmc_init_card_state\n");
+
+ switch (request->cmd) {
+ case MMC_GO_IDLE_STATE: /* No response to parse */
+ if (mmcinfo.sd)
+ mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
+ else
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ break;
+
+ case 8:
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
+ break;
+
+ case MMC_APP_CMD:
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ if (retval & (limit_41 < 100)) {
+ DEBUG(0, "mmc_init_card_state: unable to MMC_APP_CMD error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ limit_41++;
+ mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
+ } else if (limit_41 < 100) {
+ limit_41++;
+ mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
+ } else{
+ /* reset the card to idle*/
+ mmc_simple_cmd(request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
+ mmcinfo.sd = 0;
+ }
+ break;
+
+ case SD_SEND_OP_COND:
+ retval = mmc_unpack_r3(request, &r3);
+ if (retval) {
+ /* Try MMC card */
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ break;
+ }
+
+ DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
+
+ if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
+ udelay(10000);
+ mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
+ }
+ else {
+ /* Set the data bus width to 4 bits */
+ mmcinfo.sd = 1; /* SD Card ready */
+ mmcinfo.state = CARD_STATE_READY;
+ mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+ }
+ break;
+
+ case MMC_SEND_OP_COND:
+ retval = mmc_unpack_r3(request, &r3);
+ if (retval) {
+ DEBUG(0,"mmc_init_card_state: failed SEND_OP_COND error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+
+ DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
+ if (!(r3.ocr & MMC_CARD_BUSY)) {
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ }
+ else {
+ mmcinfo.sd = 0; /* MMC Card ready */
+ mmcinfo.state = CARD_STATE_READY;
+ mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+ }
+ break;
+
+ case MMC_ALL_SEND_CID:
+ retval = mmc_unpack_cid( request, &mmcinfo.cid );
+ mmc_dev.if_type = IF_TYPE_MMC;
+ mmc_dev.part_type = PART_TYPE_DOS;
+ mmc_dev.dev = 0;
+ mmc_dev.lun = 0;
+ mmc_dev.type = 0;
+ /* FIXME fill in the correct size (is set to 32MByte) */
+ mmc_dev.blksz = 512;
+ mmc_dev.lba = 0x10000;
+ mmc_dev.removable = 0;
+
+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+ if ( retval && (retval != MMC_ERROR_CRC)) {
+ DEBUG(0,"mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+ mmcinfo.state = CARD_STATE_IDENT;
+ if(mmcinfo.sd)
+ mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
+ else
+ mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
+ break;
+
+ case MMC_SET_RELATIVE_ADDR:
+ if (mmcinfo.sd) {
+ retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
+ mmcinfo.rca = mmcinfo.rca << 16;
+ DEBUG(2, "mmc_init_card_state: Get RCA from SD: 0x%04x Status: %x\n", mmcinfo.rca, r1.status);
+ } else {
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
+ }
+ if (retval) {
+ DEBUG(0, "mmc_init_card_state: unable to SET_RELATIVE_ADDR error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+
+ mmcinfo.state = CARD_STATE_STBY;
+ mmc_simple_cmd(request, MMC_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
+
+ break;
+
+ case MMC_SEND_CSD:
+ retval = mmc_unpack_csd(request, &mmcinfo.csd);
+ mmc_csd_t *csd = (mmc_csd_t *)retval;
+ memcpy(&mmc_csd, csd, sizeof(csd));
+ mmc_ready = 1;
+
+ printf("MMC card is ready\n");
+ /* FIXME add verbose printout for csd */
+
+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+ if (retval && (retval != MMC_ERROR_CRC)) {
+ DEBUG(0, "mmc_init_card_state: unable to SEND_CSD error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+ if (mmcinfo.csd.dsr_imp) {
+ DEBUG(0, "mmc_init_card_state: driver doesn't support setting DSR\n");
+ }
+ mmc_configure_card();
+ return MMC_INIT_PASSED;
+
+ default:
+ DEBUG(0, "mmc_init_card_state: error! Illegal last cmd %d\n", request->cmd);
+ return MMC_INIT_FAILED;
+ }
+
+ return MMC_INIT_DOING;
+}
+
+int mmc_init_card(void)
+{
+ struct mmc_request request;
+ int retval;
+
+ mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
+ mmc_simple_cmd(&request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
+ mmcinfo.sd = 1; /* assuming a SD card */
+
+ while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
+ ;
+
+ if (retval == MMC_INIT_PASSED)
+ return MMC_NO_ERROR;
+ else
+ return MMC_NO_RESPONSE;
+}
+
+int mmc_legacy_init(int verbose)
+{
+ if (!__msc_card_detected())
+ return 1;
+
+ printf("MMC card found\n");
+
+ /* Step-1: init GPIO */
+ __gpio_as_msc();
+
+ __msc_init_io();
+
+ /* Step-2: turn on power of card */
+#if !defined(CONFIG_SAKC)
+ __msc_enable_power();
+#endif
+
+ /* Step-3: Reset MSC Controller. */
+ __msc_reset();
+
+ /* Step-3: mask all IRQs. */
+ MMC_IRQ_MASK();
+
+ /* Step-4: stop MMC/SD clock */
+ jz_mmc_stop_clock();
+ mmc_init_card();
+ mmc_select_card();
+
+ mmc_dev.block_read = mmc_bread;
+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
+
+ return 0;
+}
+
+int mmc_ident(block_dev_desc_t *dev)
+{
+ return 0;
+}
+
+int mmc2info(ulong addr)
+{
+ /* FIXME hard codes to 32 MB device */
+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
+ return 1;
+ }
+ return 0;
+}
+/*
+ * Debugging functions
+ */
+
+static char * mmc_result_strings[] = {
+ "NO_RESPONSE",
+ "NO_ERROR",
+ "ERROR_OUT_OF_RANGE",
+ "ERROR_ADDRESS",
+ "ERROR_BLOCK_LEN",
+ "ERROR_ERASE_SEQ",
+ "ERROR_ERASE_PARAM",
+ "ERROR_WP_VIOLATION",
+ "ERROR_CARD_IS_LOCKED",
+ "ERROR_LOCK_UNLOCK_FAILED",
+ "ERROR_COM_CRC",
+ "ERROR_ILLEGAL_COMMAND",
+ "ERROR_CARD_ECC_FAILED",
+ "ERROR_CC",
+ "ERROR_GENERAL",
+ "ERROR_UNDERRUN",
+ "ERROR_OVERRUN",
+ "ERROR_CID_CSD_OVERWRITE",
+ "ERROR_STATE_MISMATCH",
+ "ERROR_HEADER_MISMATCH",
+ "ERROR_TIMEOUT",
+ "ERROR_CRC",
+ "ERROR_DRIVER_FAILURE",
+};
+
+char * mmc_result_to_string(int i)
+{
+ return mmc_result_strings[i+1];
+}
+
+static char * card_state_strings[] = {
+ "empty",
+ "idle",
+ "ready",
+ "ident",
+ "stby",
+ "tran",
+ "data",
+ "rcv",
+ "prg",
+ "dis",
+};
+
+static inline char * card_state_to_string(int i)
+{
+ return card_state_strings[i+1];
+}
+
+/*
+ * Utility functions
+ */
+
+#define PARSE_U32(_buf,_index) \
+ (((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
+ (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
+
+#define PARSE_U16(_buf,_index) \
+ (((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
+
+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
+{
+ u8 *buf = request->response;
+ int num = 0;
+
+ if (request->result)
+ return request->result;
+
+ csd->csd_structure = (buf[1] & 0xc0) >> 6;
+ if (csd->csd_structure)
+ sd2_0 = 1;
+ else
+ sd2_0 = 0;
+
+ switch (csd->csd_structure) {
+ case 0 :
+ csd->taac = buf[2];
+ csd->nsac = buf[3];
+ csd->tran_speed = buf[4];
+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+ csd->read_bl_len = buf[6] & 0x0f;
+ /* for support 2GB card*/
+ if (csd->read_bl_len >= 10)
+ {
+ num = csd->read_bl_len - 9;
+ csd->read_bl_len = 9;
+ }
+
+ csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0;
+ csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
+ csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0;
+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
+ csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
+
+ if (num)
+ csd->c_size = csd->c_size << num;
+
+
+ csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3;
+ csd->vdd_r_curr_max = buf[9] & 0x07;
+ csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5;
+ csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2;
+ csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ csd->erase.v22.sector_size = (buf[11] & 0x7c) >> 2;
+ csd->erase.v22.erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
+
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ csd->erase.v31.erase_grp_size = (buf[11] & 0x7c) >> 2;
+ csd->erase.v31.erase_grp_mult = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
+ break;
+ }
+ csd->wp_grp_size = buf[12] & 0x1f;
+ csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0;
+ csd->default_ecc = (buf[13] & 0x60) >> 5;
+ csd->r2w_factor = (buf[13] & 0x1c) >> 2;
+ csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
+ if (csd->write_bl_len >= 10)
+ csd->write_bl_len = 9;
+
+ csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0;
+ csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0;
+ csd->copy = (buf[15] & 0x40) ? 1 : 0;
+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
+ csd->file_format = (buf[15] & 0x0c) >> 2;
+ csd->ecc = buf[15] & 0x03;
+
+ DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
+ " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
+ " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
+ " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
+ " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
+ " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
+ " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
+ csd->csd_structure, csd->spec_vers,
+ csd->taac, csd->nsac, csd->tran_speed,
+ csd->ccc, csd->read_bl_len,
+ csd->read_bl_partial, csd->write_blk_misalign,
+ csd->read_blk_misalign, csd->dsr_imp,
+ csd->c_size, csd->vdd_r_curr_min,
+ csd->vdd_r_curr_max, csd->vdd_w_curr_min,
+ csd->vdd_w_curr_max, csd->c_size_mult,
+ csd->wp_grp_size, csd->wp_grp_enable,
+ csd->default_ecc, csd->r2w_factor,
+ csd->write_bl_len, csd->write_bl_partial,
+ csd->file_format_grp, csd->copy,
+ csd->perm_write_protect, csd->tmp_write_protect,
+ csd->file_format, csd->ecc);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
+ csd->erase.v22.sector_size,
+ csd->erase.v22.erase_grp_size);
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
+ csd->erase.v31.erase_grp_size,
+ csd->erase.v31.erase_grp_mult);
+ break;
+
+ }
+ break;
+
+ case 1 :
+ csd->taac = 0;
+ csd->nsac = 0;
+ csd->tran_speed = buf[4];
+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+
+ csd->read_bl_len = 9;
+ csd->read_bl_partial = 0;
+ csd->write_blk_misalign = 0;
+ csd->read_blk_misalign = 0;
+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
+ csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ csd->erase.v22.sector_size = 0x7f;
+ csd->erase.v22.erase_grp_size = 0;
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ csd->erase.v31.erase_grp_size = 0x7f;
+ csd->erase.v31.erase_grp_mult = 0;
+ break;
+ }
+ csd->wp_grp_size = 0;
+ csd->wp_grp_enable = 0;
+ csd->default_ecc = (buf[13] & 0x60) >> 5;
+ csd->r2w_factor = 4;/* Unused */
+ csd->write_bl_len = 9;
+
+ csd->write_bl_partial = 0;
+ csd->file_format_grp = 0;
+ csd->copy = (buf[15] & 0x40) ? 1 : 0;
+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
+ csd->file_format = 0;
+ csd->ecc = buf[15] & 0x03;
+
+ DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
+ " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
+ " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
+ " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
+ " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
+ " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
+ " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
+ csd->csd_structure, csd->spec_vers,
+ csd->taac, csd->nsac, csd->tran_speed,
+ csd->ccc, csd->read_bl_len,
+ csd->read_bl_partial, csd->write_blk_misalign,
+ csd->read_blk_misalign, csd->dsr_imp,
+ csd->c_size, csd->vdd_r_curr_min,
+ csd->vdd_r_curr_max, csd->vdd_w_curr_min,
+ csd->vdd_w_curr_max, csd->c_size_mult,
+ csd->wp_grp_size, csd->wp_grp_enable,
+ csd->default_ecc, csd->r2w_factor,
+ csd->write_bl_len, csd->write_bl_partial,
+ csd->file_format_grp, csd->copy,
+ csd->perm_write_protect, csd->tmp_write_protect,
+ csd->file_format, csd->ecc);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
+ csd->erase.v22.sector_size,
+ csd->erase.v22.erase_grp_size);
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
+ csd->erase.v31.erase_grp_size,
+ csd->erase.v31.erase_grp_mult);
+ break;
+ }
+ }
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+
+ return 0;
+}
+
+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ r1->cmd = buf[0];
+ r1->status = PARSE_U32(buf,1);
+
+ DEBUG(2, "mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
+
+ if (R1_STATUS(r1->status)) {
+ if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE;
+ if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS;
+ if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN;
+ if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ;
+ if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM;
+ if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION;
+ /*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */
+ if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
+ if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC;
+ if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND;
+ if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED;
+ if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC;
+ if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL;
+ if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN;
+ if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN;
+ if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE;
+ }
+
+ if (buf[0] != request->cmd) return MMC_ERROR_HEADER_MISMATCH;
+
+ /* This should be last - it's the least dangerous error */
+
+ return 0;
+}
+
+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
+{
+ u8 *buf = request->response;
+ if (request->result) return request->result;
+
+ *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
+ return mmc_unpack_r1(request, r1, state);
+
+}
+
+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ *rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */
+
+ *(buf+1) = 0;
+ *(buf+2) = 0;
+
+ return mmc_unpack_r1(request, r1, state);
+}
+
+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
+{
+ u8 *buf = request->response;
+ int i;
+
+ if (request->result) return request->result;
+
+ cid->mid = buf[1];
+ cid->oid = PARSE_U16(buf,2);
+ for (i = 0 ; i < 6 ; i++)
+ cid->pnm[i] = buf[4+i];
+ cid->pnm[6] = 0;
+ cid->prv = buf[10];
+ cid->psn = PARSE_U32(buf,11);
+ cid->mdt = buf[15];
+
+ DEBUG(2,"mmc_unpack_cid: mid=%d oid=%d pnm=%s prv=%d.%d psn=%08x mdt=%d/%d\n",
+ cid->mid, cid->oid, cid->pnm,
+ (cid->prv>>4), (cid->prv&0xf),
+ cid->psn, (cid->mdt>>4), (cid->mdt&0xf)+1997);
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+ return 0;
+}
+
+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ r3->ocr = PARSE_U32(buf,1);
+ DEBUG(2,"mmc_unpack_r3: ocr=%08x\n", r3->ocr);
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+ return 0;
+}
+
+#define KBPS 1
+#define MBPS 1000
+
+static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
+static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000,
+ 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
+
+u32 mmc_tran_speed(u8 ts)
+{
+ u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
+
+ if (rate <= 0) {
+ DEBUG(0, "mmc_tran_speed: error - unrecognized speed 0x%02x\n", ts);
+ return 1;
+ }
+
+ return rate;
+}
+
+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
+ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
+{
+ request->cmd = cmd;
+ request->arg = arg;
+ request->rtype = rtype;
+ request->nob = nob;
+ request->block_len = block_len;
+ request->buffer = buffer;
+ request->cnt = nob * block_len;
+
+ jz_mmc_exec_cmd(request);
+}
+
+#endif /* CONFIG_MMC */
+#endif /* CONFIG_JZ4740 */
--- /dev/null
+/*
+ * (C) Copyright 2003
+ * Kyle Harris, Nexus Technologies, Inc. kharris@nexus-tech.net
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <part.h>
+
+#if defined CONFIG_JZ4740
+#include <asm-mips/jz4740.h>
+
+#include "jz_mmc.h"
+
+#define CFG_MMC_BASE 0x80600000
+static int sd2_0 = 0;
+
+/*
+ * GPIO definition
+ */
+#define __msc_init_io() \
+do { \
+ __gpio_as_output(GPIO_SD_VCC_EN_N); \
+ __gpio_as_input(GPIO_SD_CD_N); \
+} while (0)
+
+#define __msc_enable_power() \
+do { \
+ __gpio_clear_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#define __msc_disable_power() \
+do { \
+ __gpio_set_pin(GPIO_SD_VCC_EN_N); \
+} while (0)
+
+#define __msc_card_detected() \
+({ \
+ int detected = 1; \
+ __gpio_as_input(GPIO_SD_CD_N); \
+ if (!__gpio_get_pin(GPIO_SD_CD_N)) \
+ detected = 0; \
+ detected; \
+})
+
+/*
+ * Local functions
+ */
+
+#ifdef CONFIG_MMC
+extern int
+fat_register_device(block_dev_desc_t *dev_desc, int part_no);
+
+static block_dev_desc_t mmc_dev;
+
+block_dev_desc_t * mmc_get_dev(int dev)
+{
+ return ((block_dev_desc_t *)&mmc_dev);
+}
+
+/*
+ * FIXME needs to read cid and csd info to determine block size
+ * and other parameters
+ */
+static uchar mmc_buf[MMC_BLOCK_SIZE];
+static int mmc_ready = 0;
+static mmc_csd_t mmc_csd;
+static int use_4bit; /* Use 4-bit data bus */
+/*
+ * MMC Events
+ */
+#define MMC_EVENT_NONE 0x00 /* No events */
+#define MMC_EVENT_RX_DATA_DONE 0x01 /* Rx data done */
+#define MMC_EVENT_TX_DATA_DONE 0x02 /* Tx data done */
+#define MMC_EVENT_PROG_DONE 0x04 /* Programming is done */
+
+
+#define MMC_IRQ_MASK() \
+do { \
+ REG_MSC_IMASK = 0xffff; \
+ REG_MSC_IREG = 0xffff; \
+} while (0)
+
+/* Stop the MMC clock and wait while it happens */
+static inline int jz_mmc_stop_clock(void)
+{
+ int timeout = 1000;
+
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP;
+
+ while (timeout && (REG_MSC_STAT & MSC_STAT_CLK_EN)) {
+ timeout--;
+ if (timeout == 0) {
+ return MMC_ERROR_TIMEOUT;
+ }
+ udelay(1);
+ }
+ return MMC_NO_ERROR;
+}
+
+/* Start the MMC clock and operation */
+static inline int jz_mmc_start_clock(void)
+{
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START | MSC_STRPCL_START_OP;
+ return MMC_NO_ERROR;
+}
+
+static inline u32 jz_mmc_calc_clkrt(int is_sd, u32 rate)
+{
+ u32 clkrt;
+ u32 clk_src = is_sd ? 24000000: 16000000;
+
+ clkrt = 0;
+ while (rate < clk_src)
+ {
+ clkrt ++;
+ clk_src >>= 1;
+ }
+ return clkrt;
+}
+
+/* Set the MMC clock frequency */
+void jz_mmc_set_clock(int sd, u32 rate)
+{
+ jz_mmc_stop_clock();
+
+ /* Select clock source of MSC */
+ __cpm_select_msc_clk(sd);
+
+ /* Set clock dividor of MSC */
+ REG_MSC_CLKRT = jz_mmc_calc_clkrt(sd, rate);
+}
+
+static int jz_mmc_check_status(struct mmc_request *request)
+{
+ u32 status = REG_MSC_STAT;
+
+ /* Checking for response or data timeout */
+ if (status & (MSC_STAT_TIME_OUT_RES | MSC_STAT_TIME_OUT_READ)) {
+ printf("MMC/SD timeout, MMC_STAT 0x%x CMD %d\n", status, request->cmd);
+ return MMC_ERROR_TIMEOUT;
+ }
+
+ /* Checking for CRC error */
+ if (status & (MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_RES_ERR)) {
+ printf("MMC/CD CRC error, MMC_STAT 0x%x\n", status);
+ return MMC_ERROR_CRC;
+ }
+
+ return MMC_NO_ERROR;
+}
+
+/* Obtain response to the command and store it to response buffer */
+static void jz_mmc_get_response(struct mmc_request *request)
+{
+ int i;
+ u8 *buf;
+ u32 data;
+
+ DEBUG(3, "fetch response for request %d, cmd %d\n", request->rtype, request->cmd);
+
+ buf = request->response;
+ request->result = MMC_NO_ERROR;
+
+ switch (request->rtype) {
+ case RESPONSE_R1: case RESPONSE_R1B: case RESPONSE_R6:
+ case RESPONSE_R3: case RESPONSE_R4: case RESPONSE_R5:
+ {
+ data = REG_MSC_RES;
+ buf[0] = (data >> 8) & 0xff;
+ buf[1] = data & 0xff;
+ data = REG_MSC_RES;
+ buf[2] = (data >> 8) & 0xff;
+ buf[3] = data & 0xff;
+ data = REG_MSC_RES;
+ buf[4] = data & 0xff;
+
+ DEBUG(3, "request %d, response [%02x %02x %02x %02x %02x]\n",
+ request->rtype, buf[0], buf[1], buf[2], buf[3], buf[4]);
+ break;
+ }
+ case RESPONSE_R2_CID: case RESPONSE_R2_CSD:
+ {
+ for (i = 0; i < 16; i += 2) {
+ data = REG_MSC_RES;
+ buf[i] = (data >> 8) & 0xff;
+ buf[i+1] = data & 0xff;
+ }
+ DEBUG(3, "request %d, response [", request->rtype);
+#if CONFIG_MMC_DEBUG_VERBOSE > 2
+ if (g_mmc_debug >= 3) {
+ int n;
+ for (n = 0; n < 17; n++)
+ printk("%02x ", buf[n]);
+ printk("]\n");
+ }
+#endif
+ break;
+ }
+ case RESPONSE_NONE:
+ DEBUG(3, "No response\n");
+ break;
+
+ default:
+ DEBUG(3, "unhandled response type for request %d\n", request->rtype);
+ break;
+ }
+}
+
+static int jz_mmc_receive_data(struct mmc_request *req)
+{
+ u32 stat, timeout, data, cnt;
+ u8 *buf = req->buffer;
+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+
+ timeout = 0x3ffffff;
+
+ while (timeout) {
+ timeout--;
+ stat = REG_MSC_STAT;
+
+ if (stat & MSC_STAT_TIME_OUT_READ)
+ return MMC_ERROR_TIMEOUT;
+ else if (stat & MSC_STAT_CRC_READ_ERROR)
+ return MMC_ERROR_CRC;
+ else if (!(stat & MSC_STAT_DATA_FIFO_EMPTY)
+ || (stat & MSC_STAT_DATA_FIFO_AFULL)) {
+ /* Ready to read data */
+ break;
+ }
+ udelay(1);
+ }
+ if (!timeout)
+ return MMC_ERROR_TIMEOUT;
+
+ /* Read data from RXFIFO. It could be FULL or PARTIAL FULL */
+ cnt = wblocklen;
+ while (cnt) {
+ data = REG_MSC_RXFIFO;
+ {
+ *buf++ = (u8)(data >> 0);
+ *buf++ = (u8)(data >> 8);
+ *buf++ = (u8)(data >> 16);
+ *buf++ = (u8)(data >> 24);
+ }
+ cnt --;
+ while (cnt && (REG_MSC_STAT & MSC_STAT_DATA_FIFO_EMPTY))
+ ;
+ }
+ return MMC_NO_ERROR;
+}
+
+static int jz_mmc_transmit_data(struct mmc_request *req)
+{
+#if 0
+ u32 nob = req->nob;
+ u32 wblocklen = (u32)(req->block_len + 3) >> 2; /* length in word */
+ u8 *buf = req->buffer;
+ u32 *wbuf = (u32 *)buf;
+ u32 waligned = (((u32)buf & 0x3) == 0); /* word aligned ? */
+ u32 stat, timeout, data, cnt;
+
+ for (nob; nob >= 1; nob--) {
+ timeout = 0x3FFFFFF;
+
+ while (timeout) {
+ timeout--;
+ stat = REG_MSC_STAT;
+
+ if (stat & (MSC_STAT_CRC_WRITE_ERROR | MSC_STAT_CRC_WRITE_ERROR_NOSTS))
+ return MMC_ERROR_CRC;
+ else if (!(stat & MSC_STAT_DATA_FIFO_FULL)) {
+ /* Ready to write data */
+ break;
+ }
+
+ udelay(1);
+ }
+
+ if (!timeout)
+ return MMC_ERROR_TIMEOUT;
+
+ /* Write data to TXFIFO */
+ cnt = wblocklen;
+ while (cnt) {
+ while (REG_MSC_STAT & MSC_STAT_DATA_FIFO_FULL)
+ ;
+
+ if (waligned) {
+ REG_MSC_TXFIFO = *wbuf++;
+ }
+ else {
+ data = *buf++ | (*buf++ << 8) | (*buf++ << 16) | (*buf++ << 24);
+ REG_MSC_TXFIFO = data;
+ }
+
+ cnt--;
+ }
+ }
+#endif
+ return MMC_NO_ERROR;
+}
+
+
+/*
+ * Name: int jz_mmc_exec_cmd()
+ * Function: send command to the card, and get a response
+ * Input: struct mmc_request *req : MMC/SD request
+ * Output: 0: right >0: error code
+ */
+int jz_mmc_exec_cmd(struct mmc_request *request)
+{
+ u32 cmdat = 0, events = 0;
+ int retval, timeout = 0x3fffff;
+
+ /* Indicate we have no result yet */
+ request->result = MMC_NO_RESPONSE;
+ if (request->cmd == MMC_CIM_RESET) {
+ /* On reset, 1-bit bus width */
+ use_4bit = 0;
+
+ /* Reset MMC/SD controller */
+ __msc_reset();
+
+ /* On reset, drop MMC clock down */
+ jz_mmc_set_clock(0, MMC_CLOCK_SLOW);
+
+ /* On reset, stop MMC clock */
+ jz_mmc_stop_clock();
+ }
+ if (request->cmd == MMC_SEND_OP_COND) {
+ DEBUG(3, "Have an MMC card\n");
+ /* always use 1bit for MMC */
+ use_4bit = 0;
+ }
+ if (request->cmd == SET_BUS_WIDTH) {
+ if (request->arg == 0x2) {
+ DEBUG(2, "Use 4-bit bus width\n");
+ use_4bit = 1;
+ }
+ else {
+ DEBUG(2, "Use 1-bit bus width\n");
+ use_4bit = 0;
+ }
+ }
+
+ /* stop clock */
+ jz_mmc_stop_clock();
+
+ /* mask all interrupts */
+ REG_MSC_IMASK = 0xffff;
+
+ /* clear status */
+ REG_MSC_IREG = 0xffff;
+
+ /* use 4-bit bus width when possible */
+ if (use_4bit)
+ cmdat |= MSC_CMDAT_BUS_WIDTH_4BIT;
+
+ /* Set command type and events */
+ switch (request->cmd) {
+ /* MMC core extra command */
+ case MMC_CIM_RESET:
+ cmdat |= MSC_CMDAT_INIT; /* Initialization sequence sent prior to command */
+ break;
+
+ /* bc - broadcast - no response */
+ case MMC_GO_IDLE_STATE:
+ case MMC_SET_DSR:
+ break;
+
+ /* bcr - broadcast with response */
+ case MMC_SEND_OP_COND:
+ case MMC_ALL_SEND_CID:
+ case MMC_GO_IRQ_STATE:
+ break;
+
+ /* adtc - addressed with data transfer */
+ case MMC_READ_DAT_UNTIL_STOP:
+ case MMC_READ_SINGLE_BLOCK:
+ case MMC_READ_MULTIPLE_BLOCK:
+ case SEND_SCR:
+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_READ;
+ events = MMC_EVENT_RX_DATA_DONE;
+ break;
+
+ case MMC_WRITE_DAT_UNTIL_STOP:
+ case MMC_WRITE_BLOCK:
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ case MMC_PROGRAM_CID:
+ case MMC_PROGRAM_CSD:
+ case MMC_SEND_WRITE_PROT:
+ case MMC_GEN_CMD:
+ case MMC_LOCK_UNLOCK:
+ cmdat |= MSC_CMDAT_DATA_EN | MSC_CMDAT_WRITE;
+ events = MMC_EVENT_TX_DATA_DONE | MMC_EVENT_PROG_DONE;
+
+ break;
+
+ case MMC_STOP_TRANSMISSION:
+ events = MMC_EVENT_PROG_DONE;
+ break;
+
+ /* ac - no data transfer */
+ default:
+ break;
+ }
+
+ /* Set response type */
+ switch (request->rtype) {
+ case RESPONSE_NONE:
+ break;
+
+ case RESPONSE_R1B:
+ cmdat |= MSC_CMDAT_BUSY;
+ /*FALLTHRU*/
+ case RESPONSE_R1:
+ cmdat |= MSC_CMDAT_RESPONSE_R1;
+ break;
+ case RESPONSE_R2_CID:
+ case RESPONSE_R2_CSD:
+ cmdat |= MSC_CMDAT_RESPONSE_R2;
+ break;
+ case RESPONSE_R3:
+ cmdat |= MSC_CMDAT_RESPONSE_R3;
+ break;
+ case RESPONSE_R4:
+ cmdat |= MSC_CMDAT_RESPONSE_R4;
+ break;
+ case RESPONSE_R5:
+ cmdat |= MSC_CMDAT_RESPONSE_R5;
+ break;
+ case RESPONSE_R6:
+ cmdat |= MSC_CMDAT_RESPONSE_R6;
+ break;
+ default:
+ break;
+ }
+
+ /* Set command index */
+ if (request->cmd == MMC_CIM_RESET) {
+ REG_MSC_CMD = MMC_GO_IDLE_STATE;
+ } else {
+ REG_MSC_CMD = request->cmd;
+ }
+
+ /* Set argument */
+ REG_MSC_ARG = request->arg;
+
+ /* Set block length and nob */
+ if (request->cmd == SEND_SCR) { /* get SCR from DataFIFO */
+ REG_MSC_BLKLEN = 8;
+ REG_MSC_NOB = 1;
+ } else {
+ REG_MSC_BLKLEN = request->block_len;
+ REG_MSC_NOB = request->nob;
+ }
+
+ /* Set command */
+ REG_MSC_CMDAT = cmdat;
+
+ DEBUG(1, "Send cmd %d cmdat: %x arg: %x resp %d\n", request->cmd,
+ cmdat, request->arg, request->rtype);
+
+ /* Start MMC/SD clock and send command to card */
+ jz_mmc_start_clock();
+
+ /* Wait for command completion */
+ while (timeout-- && !(REG_MSC_STAT & MSC_STAT_END_CMD_RES))
+ ;
+
+ if (timeout == 0)
+ return MMC_ERROR_TIMEOUT;
+
+ REG_MSC_IREG = MSC_IREG_END_CMD_RES; /* clear flag */
+
+ /* Check for status */
+ retval = jz_mmc_check_status(request);
+ if (retval) {
+ return retval;
+ }
+
+ /* Complete command with no response */
+ if (request->rtype == RESPONSE_NONE) {
+ return MMC_NO_ERROR;
+ }
+
+ /* Get response */
+ jz_mmc_get_response(request);
+
+ /* Start data operation */
+ if (events & (MMC_EVENT_RX_DATA_DONE | MMC_EVENT_TX_DATA_DONE)) {
+ if (events & MMC_EVENT_RX_DATA_DONE) {
+ if (request->cmd == SEND_SCR) {
+ /* SD card returns SCR register as data.
+ MMC core expect it in the response buffer,
+ after normal response. */
+ request->buffer = (u8 *)((u32)request->response + 5);
+ }
+ jz_mmc_receive_data(request);
+ }
+
+ if (events & MMC_EVENT_TX_DATA_DONE) {
+ jz_mmc_transmit_data(request);
+ }
+
+ /* Wait for Data Done */
+ while (!(REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE))
+ ;
+ REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE; /* clear status */
+ }
+
+ /* Wait for Prog Done event */
+ if (events & MMC_EVENT_PROG_DONE) {
+ while (!(REG_MSC_IREG & MSC_IREG_PRG_DONE))
+ ;
+ REG_MSC_IREG = MSC_IREG_PRG_DONE; /* clear status */
+ }
+
+ /* Command completed */
+
+ return MMC_NO_ERROR; /* return successfully */
+}
+
+int mmc_block_read(u8 *dst, ulong src, ulong len)
+{
+
+ struct mmc_request request;
+ struct mmc_response_r1 r1;
+ int retval;
+
+ if (len == 0) {
+ return 0;
+ }
+ mmc_simple_cmd(&request, MMC_SEND_STATUS, mmcinfo.rca, RESPONSE_R1);
+ retval = mmc_unpack_r1(&request, &r1, 0);
+ if (retval && (retval != MMC_ERROR_STATE_MISMATCH)) {
+ return retval;
+ }
+
+ mmc_simple_cmd(&request, MMC_SET_BLOCKLEN, len, RESPONSE_R1);
+ if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
+ return retval;
+ }
+
+ if (sd2_0)
+ src /= len;
+
+ mmc_send_cmd(&request, MMC_READ_SINGLE_BLOCK, src, 1,len, RESPONSE_R1, dst);
+ if ((retval = mmc_unpack_r1(&request, &r1, 0))) {
+ return retval;
+ }
+ return retval;
+}
+
+int mmc_block_write(ulong dst, uchar *src, int len)
+{
+ return 0;
+}
+
+int mmc_read(ulong src, uchar *dst, int size)
+{
+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
+ ulong mmc_block_size, mmc_block_address;
+
+ if (size == 0) {
+ return 0;
+ }
+
+ if (!mmc_ready) {
+ printf("MMC card is not ready\n");
+ return -1;
+ }
+
+ mmc_block_size = MMC_BLOCK_SIZE;
+ mmc_block_address = ~(mmc_block_size - 1);
+
+ src -= CFG_MMC_BASE;
+ end = src + size;
+ part_start = ~mmc_block_address & src;
+ part_end = ~mmc_block_address & end;
+ aligned_start = mmc_block_address & src;
+ aligned_end = mmc_block_address & end;
+ /* all block aligned accesses */
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_start) {
+ part_len = mmc_block_size - part_start;
+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(dst, mmc_buf+part_start, part_len);
+ dst += part_len;
+ src += part_len;
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ for (; src < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+
+ if ((mmc_block_read((uchar *)(dst), src, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+
+ if (part_end && src < end) {
+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(dst, mmc_buf, part_end);
+ }
+ return 0;
+
+}
+
+int mmc_write(uchar *src, ulong dst, int size)
+{
+ ulong end, part_start, part_end, part_len, aligned_start, aligned_end;
+ ulong mmc_block_size, mmc_block_address;
+
+ if (size == 0) {
+ return 0;
+ }
+
+ if (!mmc_ready) {
+ printf("MMC card is not ready\n");
+ return -1;
+ }
+
+ mmc_block_size = MMC_BLOCK_SIZE;
+ mmc_block_address = ~(mmc_block_size - 1);
+
+ dst -= CFG_MMC_BASE;
+ end = dst + size;
+ part_start = ~mmc_block_address & dst;
+ part_end = ~mmc_block_address & end;
+ aligned_start = mmc_block_address & dst;
+ aligned_end = mmc_block_address & end;
+
+ /* all block aligned accesses */
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_start) {
+ part_len = mmc_block_size - part_start;
+ debug("ps src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ (ulong)src, dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_start, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(mmc_buf+part_start, src, part_len);
+ if ((mmc_block_write(aligned_start, mmc_buf, mmc_block_size)) < 0) {
+ return -1;
+ }
+ dst += part_len;
+ src += part_len;
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ for (; dst < aligned_end; src += mmc_block_size, dst += mmc_block_size) {
+ debug("al src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_write(dst, (uchar *)src, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ debug("src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if (part_end && dst < end) {
+ debug("pe src %lx dst %lx end %lx pstart %lx pend %lx astart %lx aend %lx\n",
+ src, (ulong)dst, end, part_start, part_end, aligned_start, aligned_end);
+ if ((mmc_block_read(mmc_buf, aligned_end, mmc_block_size)) < 0) {
+ return -1;
+ }
+ memcpy(mmc_buf, src, part_end);
+ if ((mmc_block_write(aligned_end, mmc_buf, mmc_block_size)) < 0) {
+ return -1;
+ }
+ }
+ return 0;
+}
+
+ulong mmc_bread(int dev_num, ulong blknr, ulong blkcnt, ulong *dst)
+{
+ ulong src;
+ int mmc_block_size = MMC_BLOCK_SIZE;
+
+ src = blknr * mmc_block_size + CFG_MMC_BASE;
+ mmc_read(src, (uchar *)dst, blkcnt*mmc_block_size);
+ return blkcnt;
+}
+
+int mmc_select_card(void)
+{
+ struct mmc_request request;
+ struct mmc_response_r1 r1;
+ int retval;
+
+ mmc_simple_cmd(&request, MMC_SELECT_CARD, mmcinfo.rca, RESPONSE_R1B);
+ retval = mmc_unpack_r1(&request, &r1, 0);
+ if (retval) {
+ return retval;
+ }
+
+ if (mmcinfo.sd) {
+ mmc_simple_cmd(&request, MMC_APP_CMD, mmcinfo.rca, RESPONSE_R1);
+ retval = mmc_unpack_r1(&request,&r1,0);
+ if (retval) {
+ return retval;
+ }
+ mmc_simple_cmd(&request, SET_BUS_WIDTH, 2, RESPONSE_R1);
+ retval = mmc_unpack_r1(&request,&r1,0);
+ if (retval) {
+ return retval;
+ }
+ }
+ return 0;
+}
+
+/*
+ * Configure card
+ */
+static void mmc_configure_card(void)
+{
+ u32 rate;
+
+ /* Get card info */
+ if (sd2_0)
+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) << 10;
+ else
+ mmcinfo.block_num = (mmcinfo.csd.c_size + 1) * (1 << (mmcinfo.csd.c_size_mult + 2));
+
+ mmcinfo.block_len = 1 << mmcinfo.csd.read_bl_len;
+
+ /* Fix the clock rate */
+ rate = mmc_tran_speed(mmcinfo.csd.tran_speed);
+ if (rate < MMC_CLOCK_SLOW)
+ rate = MMC_CLOCK_SLOW;
+ if ((mmcinfo.sd == 0) && (rate > MMC_CLOCK_FAST))
+ rate = MMC_CLOCK_FAST;
+ if ((mmcinfo.sd) && (rate > SD_CLOCK_FAST))
+ rate = SD_CLOCK_FAST;
+
+ DEBUG(2,"mmc_configure_card: block_len=%d block_num=%d rate=%d\n", mmcinfo.block_len, mmcinfo.block_num, rate);
+
+ jz_mmc_set_clock(mmcinfo.sd, rate);
+}
+
+/*
+ * State machine routines to initialize card(s)
+ */
+
+/*
+ CIM_SINGLE_CARD_ACQ (frequency at 400 kHz)
+ --- Must enter from GO_IDLE_STATE ---
+ 1. SD_SEND_OP_COND (SD Card) [CMD55] + [CMD41]
+ 2. SEND_OP_COND (Full Range) [CMD1] {optional}
+ 3. SEND_OP_COND (Set Range ) [CMD1]
+ If busy, delay and repeat step 2
+ 4. ALL_SEND_CID [CMD2]
+ If timeout, set an error (no cards found)
+ 5. SET_RELATIVE_ADDR [CMD3]
+ 6. SEND_CSD [CMD9]
+ 7. SET_DSR [CMD4] Only call this if (csd.dsr_imp).
+ 8. Set clock frequency (check available in csd.tran_speed)
+ */
+
+#define MMC_INIT_DOING 0
+#define MMC_INIT_PASSED 1
+#define MMC_INIT_FAILED 2
+
+static int mmc_init_card_state(struct mmc_request *request)
+{
+ struct mmc_response_r1 r1;
+ struct mmc_response_r3 r3;
+ int retval;
+ int ocr = 0x40300000;
+ int limit_41 = 0;
+
+ DEBUG(2,"mmc_init_card_state\n");
+
+ switch (request->cmd) {
+ case MMC_GO_IDLE_STATE: /* No response to parse */
+ if (mmcinfo.sd)
+ mmc_simple_cmd(request, 8, 0x1aa, RESPONSE_R1);
+ else
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ break;
+
+ case 8:
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
+ break;
+
+ case MMC_APP_CMD:
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ if (retval & (limit_41 < 100)) {
+ DEBUG(0, "mmc_init_card_state: unable to MMC_APP_CMD error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ limit_41++;
+ mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
+ } else if (limit_41 < 100) {
+ limit_41++;
+ mmc_simple_cmd(request, SD_SEND_OP_COND, ocr, RESPONSE_R3);
+ } else{
+ /* reset the card to idle*/
+ mmc_simple_cmd(request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
+ mmcinfo.sd = 0;
+ }
+ break;
+
+ case SD_SEND_OP_COND:
+ retval = mmc_unpack_r3(request, &r3);
+ if (retval) {
+ /* Try MMC card */
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ break;
+ }
+
+ DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
+
+ if(!(r3.ocr & MMC_CARD_BUSY || ocr == 0)){
+ udelay(10000);
+ mmc_simple_cmd(request, MMC_APP_CMD, 0, RESPONSE_R1);
+ }
+ else {
+ /* Set the data bus width to 4 bits */
+ mmcinfo.sd = 1; /* SD Card ready */
+ mmcinfo.state = CARD_STATE_READY;
+ mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+ }
+ break;
+
+ case MMC_SEND_OP_COND:
+ retval = mmc_unpack_r3(request, &r3);
+ if (retval) {
+ DEBUG(0,"mmc_init_card_state: failed SEND_OP_COND error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+
+ DEBUG(2,"mmc_init_card_state: read ocr value = 0x%08x\n", r3.ocr);
+ if (!(r3.ocr & MMC_CARD_BUSY)) {
+ mmc_simple_cmd(request, MMC_SEND_OP_COND, MMC_OCR_ARG, RESPONSE_R3);
+ }
+ else {
+ mmcinfo.sd = 0; /* MMC Card ready */
+ mmcinfo.state = CARD_STATE_READY;
+ mmc_simple_cmd(request, MMC_ALL_SEND_CID, 0, RESPONSE_R2_CID);
+ }
+ break;
+
+ case MMC_ALL_SEND_CID:
+ retval = mmc_unpack_cid( request, &mmcinfo.cid );
+ mmc_dev.if_type = IF_TYPE_MMC;
+ mmc_dev.part_type = PART_TYPE_DOS;
+ mmc_dev.dev = 0;
+ mmc_dev.lun = 0;
+ mmc_dev.type = 0;
+ /* FIXME fill in the correct size (is set to 32MByte) */
+ mmc_dev.blksz = 512;
+ mmc_dev.lba = 0x10000;
+ mmc_dev.removable = 0;
+
+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+ if ( retval && (retval != MMC_ERROR_CRC)) {
+ DEBUG(0,"mmc_init_card_state: unable to ALL_SEND_CID error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+ mmcinfo.state = CARD_STATE_IDENT;
+ if(mmcinfo.sd)
+ mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, 0, RESPONSE_R6);
+ else
+ mmc_simple_cmd(request, MMC_SET_RELATIVE_ADDR, ID_TO_RCA(mmcinfo.id) << 16, RESPONSE_R1);
+ break;
+
+ case MMC_SET_RELATIVE_ADDR:
+ if (mmcinfo.sd) {
+ retval = mmc_unpack_r6(request, &r1, mmcinfo.state, &mmcinfo.rca);
+ mmcinfo.rca = mmcinfo.rca << 16;
+ DEBUG(2, "mmc_init_card_state: Get RCA from SD: 0x%04x Status: %x\n", mmcinfo.rca, r1.status);
+ } else {
+ retval = mmc_unpack_r1(request,&r1,mmcinfo.state);
+ mmcinfo.rca = ID_TO_RCA(mmcinfo.id) << 16;
+ }
+ if (retval) {
+ DEBUG(0, "mmc_init_card_state: unable to SET_RELATIVE_ADDR error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+
+ mmcinfo.state = CARD_STATE_STBY;
+ mmc_simple_cmd(request, MMC_SEND_CSD, mmcinfo.rca, RESPONSE_R2_CSD);
+
+ break;
+
+ case MMC_SEND_CSD:
+ retval = mmc_unpack_csd(request, &mmcinfo.csd);
+ mmc_csd_t *csd = (mmc_csd_t *)retval;
+ memcpy(&mmc_csd, csd, sizeof(csd));
+ mmc_ready = 1;
+
+ printf("MMC card is ready\n");
+ /* FIXME add verbose printout for csd */
+
+ /*FIXME:ignore CRC error for CMD2/CMD9/CMD10 */
+ if (retval && (retval != MMC_ERROR_CRC)) {
+ DEBUG(0, "mmc_init_card_state: unable to SEND_CSD error=%d (%s)\n",
+ retval, mmc_result_to_string(retval));
+ return MMC_INIT_FAILED;
+ }
+ if (mmcinfo.csd.dsr_imp) {
+ DEBUG(0, "mmc_init_card_state: driver doesn't support setting DSR\n");
+ }
+ mmc_configure_card();
+ return MMC_INIT_PASSED;
+
+ default:
+ DEBUG(0, "mmc_init_card_state: error! Illegal last cmd %d\n", request->cmd);
+ return MMC_INIT_FAILED;
+ }
+
+ return MMC_INIT_DOING;
+}
+
+int mmc_init_card(void)
+{
+ struct mmc_request request;
+ int retval;
+
+ mmc_simple_cmd(&request, MMC_CIM_RESET, 0, RESPONSE_NONE); /* reset card */
+ mmc_simple_cmd(&request, MMC_GO_IDLE_STATE, 0, RESPONSE_NONE);
+ mmcinfo.sd = 1; /* assuming a SD card */
+
+ while ((retval = mmc_init_card_state(&request)) == MMC_INIT_DOING)
+ ;
+
+ if (retval == MMC_INIT_PASSED)
+ return MMC_NO_ERROR;
+ else
+ return MMC_NO_RESPONSE;
+}
+
+int mmc_legacy_init(int verbose)
+{
+ if (!__msc_card_detected())
+ return 1;
+
+ printf("MMC card found\n");
+
+ /* Step-1: init GPIO */
+ __gpio_as_msc();
+
+ __msc_init_io();
+
+ /* Step-2: turn on power of card */
+ __msc_enable_power();
+
+ /* Step-3: Reset MSC Controller. */
+ __msc_reset();
+
+ /* Step-3: mask all IRQs. */
+ MMC_IRQ_MASK();
+
+ /* Step-4: stop MMC/SD clock */
+ jz_mmc_stop_clock();
+ mmc_init_card();
+ mmc_select_card();
+
+ mmc_dev.block_read = mmc_bread;
+ fat_register_device(&mmc_dev,1); /* partitions start counting with 1 */
+
+ return 0;
+}
+
+int mmc_ident(block_dev_desc_t *dev)
+{
+ return 0;
+}
+
+int mmc2info(ulong addr)
+{
+ /* FIXME hard codes to 32 MB device */
+ if (addr >= CFG_MMC_BASE && addr < CFG_MMC_BASE + 0x02000000) {
+ return 1;
+ }
+ return 0;
+}
+/*
+ * Debugging functions
+ */
+
+static char * mmc_result_strings[] = {
+ "NO_RESPONSE",
+ "NO_ERROR",
+ "ERROR_OUT_OF_RANGE",
+ "ERROR_ADDRESS",
+ "ERROR_BLOCK_LEN",
+ "ERROR_ERASE_SEQ",
+ "ERROR_ERASE_PARAM",
+ "ERROR_WP_VIOLATION",
+ "ERROR_CARD_IS_LOCKED",
+ "ERROR_LOCK_UNLOCK_FAILED",
+ "ERROR_COM_CRC",
+ "ERROR_ILLEGAL_COMMAND",
+ "ERROR_CARD_ECC_FAILED",
+ "ERROR_CC",
+ "ERROR_GENERAL",
+ "ERROR_UNDERRUN",
+ "ERROR_OVERRUN",
+ "ERROR_CID_CSD_OVERWRITE",
+ "ERROR_STATE_MISMATCH",
+ "ERROR_HEADER_MISMATCH",
+ "ERROR_TIMEOUT",
+ "ERROR_CRC",
+ "ERROR_DRIVER_FAILURE",
+};
+
+char * mmc_result_to_string(int i)
+{
+ return mmc_result_strings[i+1];
+}
+
+static char * card_state_strings[] = {
+ "empty",
+ "idle",
+ "ready",
+ "ident",
+ "stby",
+ "tran",
+ "data",
+ "rcv",
+ "prg",
+ "dis",
+};
+
+static inline char * card_state_to_string(int i)
+{
+ return card_state_strings[i+1];
+}
+
+/*
+ * Utility functions
+ */
+
+#define PARSE_U32(_buf,_index) \
+ (((u32)_buf[_index]) << 24) | (((u32)_buf[_index+1]) << 16) | \
+ (((u32)_buf[_index+2]) << 8) | ((u32)_buf[_index+3]);
+
+#define PARSE_U16(_buf,_index) \
+ (((u16)_buf[_index]) << 8) | ((u16)_buf[_index+1]);
+
+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd)
+{
+ u8 *buf = request->response;
+ int num = 0;
+
+ if (request->result)
+ return request->result;
+
+ csd->csd_structure = (buf[1] & 0xc0) >> 6;
+ if (csd->csd_structure)
+ sd2_0 = 1;
+ else
+ sd2_0 = 0;
+
+ switch (csd->csd_structure) {
+ case 0 :
+ csd->taac = buf[2];
+ csd->nsac = buf[3];
+ csd->tran_speed = buf[4];
+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+ csd->read_bl_len = buf[6] & 0x0f;
+ /* for support 2GB card*/
+ if (csd->read_bl_len >= 10)
+ {
+ num = csd->read_bl_len - 9;
+ csd->read_bl_len = 9;
+ }
+
+ csd->read_bl_partial = (buf[7] & 0x80) ? 1 : 0;
+ csd->write_blk_misalign = (buf[7] & 0x40) ? 1 : 0;
+ csd->read_blk_misalign = (buf[7] & 0x20) ? 1 : 0;
+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
+ csd->c_size = ((((u16)buf[7]) & 0x03) << 10) | (((u16)buf[8]) << 2) | (((u16)buf[9]) & 0xc0) >> 6;
+
+ if (num)
+ csd->c_size = csd->c_size << num;
+
+
+ csd->vdd_r_curr_min = (buf[9] & 0x38) >> 3;
+ csd->vdd_r_curr_max = buf[9] & 0x07;
+ csd->vdd_w_curr_min = (buf[10] & 0xe0) >> 5;
+ csd->vdd_w_curr_max = (buf[10] & 0x1c) >> 2;
+ csd->c_size_mult = ((buf[10] & 0x03) << 1) | ((buf[11] & 0x80) >> 7);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ csd->erase.v22.sector_size = (buf[11] & 0x7c) >> 2;
+ csd->erase.v22.erase_grp_size = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
+
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ csd->erase.v31.erase_grp_size = (buf[11] & 0x7c) >> 2;
+ csd->erase.v31.erase_grp_mult = ((buf[11] & 0x03) << 3) | ((buf[12] & 0xe0) >> 5);
+ break;
+ }
+ csd->wp_grp_size = buf[12] & 0x1f;
+ csd->wp_grp_enable = (buf[13] & 0x80) ? 1 : 0;
+ csd->default_ecc = (buf[13] & 0x60) >> 5;
+ csd->r2w_factor = (buf[13] & 0x1c) >> 2;
+ csd->write_bl_len = ((buf[13] & 0x03) << 2) | ((buf[14] & 0xc0) >> 6);
+ if (csd->write_bl_len >= 10)
+ csd->write_bl_len = 9;
+
+ csd->write_bl_partial = (buf[14] & 0x20) ? 1 : 0;
+ csd->file_format_grp = (buf[15] & 0x80) ? 1 : 0;
+ csd->copy = (buf[15] & 0x40) ? 1 : 0;
+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
+ csd->file_format = (buf[15] & 0x0c) >> 2;
+ csd->ecc = buf[15] & 0x03;
+
+ DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
+ " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
+ " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
+ " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
+ " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
+ " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
+ " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
+ csd->csd_structure, csd->spec_vers,
+ csd->taac, csd->nsac, csd->tran_speed,
+ csd->ccc, csd->read_bl_len,
+ csd->read_bl_partial, csd->write_blk_misalign,
+ csd->read_blk_misalign, csd->dsr_imp,
+ csd->c_size, csd->vdd_r_curr_min,
+ csd->vdd_r_curr_max, csd->vdd_w_curr_min,
+ csd->vdd_w_curr_max, csd->c_size_mult,
+ csd->wp_grp_size, csd->wp_grp_enable,
+ csd->default_ecc, csd->r2w_factor,
+ csd->write_bl_len, csd->write_bl_partial,
+ csd->file_format_grp, csd->copy,
+ csd->perm_write_protect, csd->tmp_write_protect,
+ csd->file_format, csd->ecc);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
+ csd->erase.v22.sector_size,
+ csd->erase.v22.erase_grp_size);
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
+ csd->erase.v31.erase_grp_size,
+ csd->erase.v31.erase_grp_mult);
+ break;
+
+ }
+ break;
+
+ case 1 :
+ csd->taac = 0;
+ csd->nsac = 0;
+ csd->tran_speed = buf[4];
+ csd->ccc = (((u16)buf[5]) << 4) | ((buf[6] & 0xf0) >> 4);
+
+ csd->read_bl_len = 9;
+ csd->read_bl_partial = 0;
+ csd->write_blk_misalign = 0;
+ csd->read_blk_misalign = 0;
+ csd->dsr_imp = (buf[7] & 0x10) ? 1 : 0;
+ csd->c_size = ((((u16)buf[8]) & 0x3f) << 16) | (((u16)buf[9]) << 8) | ((u16)buf[10]) ;
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ csd->erase.v22.sector_size = 0x7f;
+ csd->erase.v22.erase_grp_size = 0;
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ csd->erase.v31.erase_grp_size = 0x7f;
+ csd->erase.v31.erase_grp_mult = 0;
+ break;
+ }
+ csd->wp_grp_size = 0;
+ csd->wp_grp_enable = 0;
+ csd->default_ecc = (buf[13] & 0x60) >> 5;
+ csd->r2w_factor = 4;/* Unused */
+ csd->write_bl_len = 9;
+
+ csd->write_bl_partial = 0;
+ csd->file_format_grp = 0;
+ csd->copy = (buf[15] & 0x40) ? 1 : 0;
+ csd->perm_write_protect = (buf[15] & 0x20) ? 1 : 0;
+ csd->tmp_write_protect = (buf[15] & 0x10) ? 1 : 0;
+ csd->file_format = 0;
+ csd->ecc = buf[15] & 0x03;
+
+ DEBUG(2," csd_structure=%d spec_vers=%d taac=%02x nsac=%02x tran_speed=%02x\n"
+ " ccc=%04x read_bl_len=%d read_bl_partial=%d write_blk_misalign=%d\n"
+ " read_blk_misalign=%d dsr_imp=%d c_size=%d vdd_r_curr_min=%d\n"
+ " vdd_r_curr_max=%d vdd_w_curr_min=%d vdd_w_curr_max=%d c_size_mult=%d\n"
+ " wp_grp_size=%d wp_grp_enable=%d default_ecc=%d r2w_factor=%d\n"
+ " write_bl_len=%d write_bl_partial=%d file_format_grp=%d copy=%d\n"
+ " perm_write_protect=%d tmp_write_protect=%d file_format=%d ecc=%d\n",
+ csd->csd_structure, csd->spec_vers,
+ csd->taac, csd->nsac, csd->tran_speed,
+ csd->ccc, csd->read_bl_len,
+ csd->read_bl_partial, csd->write_blk_misalign,
+ csd->read_blk_misalign, csd->dsr_imp,
+ csd->c_size, csd->vdd_r_curr_min,
+ csd->vdd_r_curr_max, csd->vdd_w_curr_min,
+ csd->vdd_w_curr_max, csd->c_size_mult,
+ csd->wp_grp_size, csd->wp_grp_enable,
+ csd->default_ecc, csd->r2w_factor,
+ csd->write_bl_len, csd->write_bl_partial,
+ csd->file_format_grp, csd->copy,
+ csd->perm_write_protect, csd->tmp_write_protect,
+ csd->file_format, csd->ecc);
+ switch (csd->csd_structure) {
+ case CSD_STRUCT_VER_1_0:
+ case CSD_STRUCT_VER_1_1:
+ DEBUG(2," V22 sector_size=%d erase_grp_size=%d\n",
+ csd->erase.v22.sector_size,
+ csd->erase.v22.erase_grp_size);
+ break;
+ case CSD_STRUCT_VER_1_2:
+ default:
+ DEBUG(2," V31 erase_grp_size=%d erase_grp_mult=%d\n",
+ csd->erase.v31.erase_grp_size,
+ csd->erase.v31.erase_grp_mult);
+ break;
+ }
+ }
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+
+ return 0;
+}
+
+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ r1->cmd = buf[0];
+ r1->status = PARSE_U32(buf,1);
+
+ DEBUG(2, "mmc_unpack_r1: cmd=%d status=%08x\n", r1->cmd, r1->status);
+
+ if (R1_STATUS(r1->status)) {
+ if (r1->status & R1_OUT_OF_RANGE) return MMC_ERROR_OUT_OF_RANGE;
+ if (r1->status & R1_ADDRESS_ERROR) return MMC_ERROR_ADDRESS;
+ if (r1->status & R1_BLOCK_LEN_ERROR) return MMC_ERROR_BLOCK_LEN;
+ if (r1->status & R1_ERASE_SEQ_ERROR) return MMC_ERROR_ERASE_SEQ;
+ if (r1->status & R1_ERASE_PARAM) return MMC_ERROR_ERASE_PARAM;
+ if (r1->status & R1_WP_VIOLATION) return MMC_ERROR_WP_VIOLATION;
+ /*if (r1->status & R1_CARD_IS_LOCKED) return MMC_ERROR_CARD_IS_LOCKED; */
+ if (r1->status & R1_LOCK_UNLOCK_FAILED) return MMC_ERROR_LOCK_UNLOCK_FAILED;
+ if (r1->status & R1_COM_CRC_ERROR) return MMC_ERROR_COM_CRC;
+ if (r1->status & R1_ILLEGAL_COMMAND) return MMC_ERROR_ILLEGAL_COMMAND;
+ if (r1->status & R1_CARD_ECC_FAILED) return MMC_ERROR_CARD_ECC_FAILED;
+ if (r1->status & R1_CC_ERROR) return MMC_ERROR_CC;
+ if (r1->status & R1_ERROR) return MMC_ERROR_GENERAL;
+ if (r1->status & R1_UNDERRUN) return MMC_ERROR_UNDERRUN;
+ if (r1->status & R1_OVERRUN) return MMC_ERROR_OVERRUN;
+ if (r1->status & R1_CID_CSD_OVERWRITE) return MMC_ERROR_CID_CSD_OVERWRITE;
+ }
+
+ if (buf[0] != request->cmd) return MMC_ERROR_HEADER_MISMATCH;
+
+ /* This should be last - it's the least dangerous error */
+
+ return 0;
+}
+
+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr)
+{
+ u8 *buf = request->response;
+ if (request->result) return request->result;
+
+ *scr = PARSE_U32(buf, 5); /* Save SCR returned by the SD Card */
+ return mmc_unpack_r1(request, r1, state);
+
+}
+
+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ *rca = PARSE_U16(buf,1); /* Save RCA returned by the SD Card */
+
+ *(buf+1) = 0;
+ *(buf+2) = 0;
+
+ return mmc_unpack_r1(request, r1, state);
+}
+
+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid)
+{
+ u8 *buf = request->response;
+ int i;
+
+ if (request->result) return request->result;
+
+ cid->mid = buf[1];
+ cid->oid = PARSE_U16(buf,2);
+ for (i = 0 ; i < 6 ; i++)
+ cid->pnm[i] = buf[4+i];
+ cid->pnm[6] = 0;
+ cid->prv = buf[10];
+ cid->psn = PARSE_U32(buf,11);
+ cid->mdt = buf[15];
+
+ DEBUG(2,"mmc_unpack_cid: mid=%d oid=%d pnm=%s prv=%d.%d psn=%08x mdt=%d/%d\n",
+ cid->mid, cid->oid, cid->pnm,
+ (cid->prv>>4), (cid->prv&0xf),
+ cid->psn, (cid->mdt>>4), (cid->mdt&0xf)+1997);
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+ return 0;
+}
+
+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3)
+{
+ u8 *buf = request->response;
+
+ if (request->result) return request->result;
+
+ r3->ocr = PARSE_U32(buf,1);
+ DEBUG(2,"mmc_unpack_r3: ocr=%08x\n", r3->ocr);
+
+ if (buf[0] != 0x3f) return MMC_ERROR_HEADER_MISMATCH;
+ return 0;
+}
+
+#define KBPS 1
+#define MBPS 1000
+
+static u32 ts_exp[] = { 100*KBPS, 1*MBPS, 10*MBPS, 100*MBPS, 0, 0, 0, 0 };
+static u32 ts_mul[] = { 0, 1000, 1200, 1300, 1500, 2000, 2500, 3000,
+ 3500, 4000, 4500, 5000, 5500, 6000, 7000, 8000 };
+
+u32 mmc_tran_speed(u8 ts)
+{
+ u32 rate = ts_exp[(ts & 0x7)] * ts_mul[(ts & 0x78) >> 3];
+
+ if (rate <= 0) {
+ DEBUG(0, "mmc_tran_speed: error - unrecognized speed 0x%02x\n", ts);
+ return 1;
+ }
+
+ return rate;
+}
+
+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
+ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer)
+{
+ request->cmd = cmd;
+ request->arg = arg;
+ request->rtype = rtype;
+ request->nob = nob;
+ request->block_len = block_len;
+ request->buffer = buffer;
+ request->cnt = nob * block_len;
+
+ jz_mmc_exec_cmd(request);
+}
+
+#endif /* CONFIG_MMC */
+#endif /* CONFIG_JZ4740 */
--- /dev/null
+/*
+ * linux/drivers/mmc/jz_mmc.h
+ *
+ * Author: Vladimir Shebordaev, Igor Oblakov
+ * Copyright: MontaVista Software Inc.
+ *
+ * $Id: jz_mmc.h,v 1.3 2007-06-15 08:04:20 jlwei Exp $
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#ifndef __MMC_JZMMC_H__
+#define __MMC_JZMMC_H__
+
+#include "mmc_protocol.h"
+
+#define MMC_DEBUG_LEVEL 0 /* Enable Debug: 0 - no debug */
+
+#define MMC_BLOCK_SIZE 512 /* MMC/SD Block Size */
+
+#define ID_TO_RCA(x) ((x)+1)
+
+#define MMC_OCR_ARG 0x00ff8000 /* Argument of OCR */
+
+enum mmc_result_t {
+ MMC_NO_RESPONSE = -1,
+ MMC_NO_ERROR = 0,
+ MMC_ERROR_OUT_OF_RANGE,
+ MMC_ERROR_ADDRESS,
+ MMC_ERROR_BLOCK_LEN,
+ MMC_ERROR_ERASE_SEQ,
+ MMC_ERROR_ERASE_PARAM,
+ MMC_ERROR_WP_VIOLATION,
+ MMC_ERROR_CARD_IS_LOCKED,
+ MMC_ERROR_LOCK_UNLOCK_FAILED,
+ MMC_ERROR_COM_CRC,
+ MMC_ERROR_ILLEGAL_COMMAND,
+ MMC_ERROR_CARD_ECC_FAILED,
+ MMC_ERROR_CC,
+ MMC_ERROR_GENERAL,
+ MMC_ERROR_UNDERRUN,
+ MMC_ERROR_OVERRUN,
+ MMC_ERROR_CID_CSD_OVERWRITE,
+ MMC_ERROR_STATE_MISMATCH,
+ MMC_ERROR_HEADER_MISMATCH,
+ MMC_ERROR_TIMEOUT,
+ MMC_ERROR_CRC,
+ MMC_ERROR_DRIVER_FAILURE,
+};
+
+/* the information structure of MMC/SD Card */
+typedef struct MMC_INFO
+{
+ int id; /* Card index */
+ int sd; /* MMC or SD card */
+ int rca; /* RCA */
+ u32 scr; /* SCR 63:32*/
+ int flags; /* Ejected, inserted */
+ enum card_state state; /* empty, ident, ready, whatever */
+
+ /* Card specific information */
+ struct mmc_cid cid;
+ struct mmc_csd csd;
+ u32 block_num;
+ u32 block_len;
+ u32 erase_unit;
+} mmc_info;
+
+mmc_info mmcinfo;
+
+struct mmc_request {
+ int index; /* Slot index - used for CS lines */
+ int cmd; /* Command to send */
+ u32 arg; /* Argument to send */
+ enum mmc_rsp_t rtype; /* Response type expected */
+
+ /* Data transfer (these may be modified at the low level) */
+ u16 nob; /* Number of blocks to transfer*/
+ u16 block_len; /* Block length */
+ u8 *buffer; /* Data buffer */
+ u32 cnt; /* Data length, for PIO */
+
+ /* Results */
+ u8 response[18]; /* Buffer to store response - CRC is optional */
+ enum mmc_result_t result;
+};
+
+char * mmc_result_to_string(int);
+int mmc_unpack_csd(struct mmc_request *request, struct mmc_csd *csd);
+int mmc_unpack_r1(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state);
+int mmc_unpack_r6(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, int *rca);
+int mmc_unpack_scr(struct mmc_request *request, struct mmc_response_r1 *r1, enum card_state state, u32 *scr);
+int mmc_unpack_cid(struct mmc_request *request, struct mmc_cid *cid);
+int mmc_unpack_r3(struct mmc_request *request, struct mmc_response_r3 *r3);
+
+void mmc_send_cmd(struct mmc_request *request, int cmd, u32 arg,
+ u16 nob, u16 block_len, enum mmc_rsp_t rtype, u8 *buffer);
+u32 mmc_tran_speed(u8 ts);
+void jz_mmc_set_clock(int sd, u32 rate);
+void jz_mmc_hardware_init(void);
+
+static inline void mmc_simple_cmd(struct mmc_request *request, int cmd, u32 arg, enum mmc_rsp_t rtype)
+{
+ mmc_send_cmd( request, cmd, arg, 0, 0, rtype, 0);
+}
+
+int mmc_legacy_init(int verbose);
+int mmc_read(ulong src, uchar *dst, int size);
+int mmc_write(uchar *src, ulong dst, int size);
+int mmc2info(ulong addr);
+
+#endif /* __MMC_JZMMC_H__ */
--- /dev/null
+/*
+ * Jz47xx UART support
+ *
+ * Hardcoded to UART 0 for now
+ * Options also hardcoded to 8N1
+ *
+ * Copyright (c) 2005
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+
+#if defined(CONFIG_JZ4740)
+
+#include <common.h>
+
+#include <asm/jz4740.h>
+
+#undef UART_BASE
+#ifndef CONFIG_SYS_UART_BASE
+#define UART_BASE UART0_BASE
+#else
+#define UART_BASE CONFIG_SYS_UART_BASE
+#endif
+
+/******************************************************************************
+*
+* serial_init - initialize a channel
+*
+* This routine initializes the number of data bits, parity
+* and set the selected baud rate. Interrupts are disabled.
+* Set the modem control signals if the option is selected.
+*
+* RETURNS: N/A
+*/
+
+int serial_init (void)
+{
+#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
+ volatile u8 *uart_fcr = (volatile u8 *)(UART_BASE + OFF_FCR);
+ volatile u8 *uart_lcr = (volatile u8 *)(UART_BASE + OFF_LCR);
+ volatile u8 *uart_ier = (volatile u8 *)(UART_BASE + OFF_IER);
+ volatile u8 *uart_sircr = (volatile u8 *)(UART_BASE + OFF_SIRCR);
+
+ /* Disable port interrupts while changing hardware */
+ *uart_ier = 0;
+
+ /* Disable UART unit function */
+ *uart_fcr = ~UART_FCR_UUE;
+
+ /* Set both receiver and transmitter in UART mode (not SIR) */
+ *uart_sircr = ~(SIRCR_RSIRE | SIRCR_TSIRE);
+
+ /* Set databits, stopbits and parity. (8-bit data, 1 stopbit, no parity) */
+ *uart_lcr = UART_LCR_WLEN_8 | UART_LCR_STOP_1;
+
+ /* Set baud rate */
+ serial_setbrg();
+
+ /* Enable UART unit, enable and clear FIFO */
+ *uart_fcr = UART_FCR_UUE | UART_FCR_FE | UART_FCR_TFLS | UART_FCR_RFLS;
+#endif
+ return 0;
+}
+
+void serial_setbrg (void)
+{
+ volatile u8 *uart_lcr = (volatile u8 *)(UART_BASE + OFF_LCR);
+ volatile u8 *uart_dlhr = (volatile u8 *)(UART_BASE + OFF_DLHR);
+ volatile u8 *uart_dllr = (volatile u8 *)(UART_BASE + OFF_DLLR);
+ u32 baud_div, tmp;
+
+ baud_div = CONFIG_SYS_EXTAL / 16 / CONFIG_BAUDRATE;
+
+ tmp = *uart_lcr;
+ tmp |= UART_LCR_DLAB;
+ *uart_lcr = tmp;
+
+ *uart_dlhr = (baud_div >> 8) & 0xff;
+ *uart_dllr = baud_div & 0xff;
+
+ tmp &= ~UART_LCR_DLAB;
+ *uart_lcr = tmp;
+}
+
+void serial_putc (const char c)
+{
+ volatile u8 *uart_lsr = (volatile u8 *)(UART_BASE + OFF_LSR);
+ volatile u8 *uart_tdr = (volatile u8 *)(UART_BASE + OFF_TDR);
+
+ if (c == '\n') serial_putc ('\r');
+
+ /* Wait for fifo to shift out some bytes */
+ while ( !((*uart_lsr & (UART_LSR_TDRQ | UART_LSR_TEMT)) == 0x60) );
+
+ *uart_tdr = (u8)c;
+}
+
+void serial_puts (const char *s)
+{
+ while (*s) {
+ serial_putc (*s++);
+ }
+}
+
+int serial_getc (void)
+{
+ volatile u8 *uart_rdr = (volatile u8 *)(UART_BASE + OFF_RDR);
+
+ while (!serial_tstc());
+
+ return *uart_rdr;
+}
+
+int serial_tstc (void)
+{
+ volatile u8 *uart_lsr = (volatile u8 *)(UART_BASE + OFF_LSR);
+
+ if (*uart_lsr & UART_LSR_DR) {
+ /* Data in rfifo */
+ return (1);
+ }
+ return 0;
+}
+
+#endif
--- /dev/null
+/*
+**********************************************************************
+*
+* uC/MMC
+*
+* (c) Copyright 2005 - 2007, Ingenic Semiconductor, Inc
+* All rights reserved.
+*
+***********************************************************************
+
+----------------------------------------------------------------------
+File : mmc_protocol.h
+Purpose : MMC protocol definitions.
+
+----------------------------------------------------------------------
+Version-Date-----Author-Explanation
+----------------------------------------------------------------------
+1.00.00 20060831 WeiJianli First release
+
+----------------------------------------------------------------------
+Known problems or limitations with current version
+----------------------------------------------------------------------
+(none)
+---------------------------END-OF-HEADER------------------------------
+*/
+
+#ifndef __MMC_PROTOCOL__
+#define __MMC_PROTOCOL__
+
+/* Standard MMC/SD clock speeds */
+#define MMC_CLOCK_SLOW 400000 /* 400 kHz for initial setup */
+#define MMC_CLOCK_FAST 20000000 /* 20 MHz for maximum for normal operation */
+#define SD_CLOCK_FAST 24000000 /* 24 MHz for SD Cards */
+
+/* Extra MMC commands for state control */
+/* Use negative numbers to disambiguate */
+#define MMC_CIM_RESET -1
+
+/* Standard MMC commands (3.1) type argument response */
+ /* class 1 */
+#define MMC_GO_IDLE_STATE 0 /* bc */
+#define MMC_SEND_OP_COND 1 /* bcr [31:0] OCR R3 */
+#define MMC_ALL_SEND_CID 2 /* bcr R2 */
+#define MMC_SET_RELATIVE_ADDR 3 /* ac [31:16] RCA R1 */
+#define MMC_SET_DSR 4 /* bc [31:16] RCA */
+#define MMC_SELECT_CARD 7 /* ac [31:16] RCA R1 */
+#define MMC_SEND_CSD 9 /* ac [31:16] RCA R2 */
+#define MMC_SEND_CID 10 /* ac [31:16] RCA R2 */
+#define MMC_READ_DAT_UNTIL_STOP 11 /* adtc [31:0] dadr R1 */
+#define MMC_STOP_TRANSMISSION 12 /* ac R1b */
+#define MMC_SEND_STATUS 13 /* ac [31:16] RCA R1 */
+#define MMC_GO_INACTIVE_STATE 15 /* ac [31:16] RCA */
+
+ /* class 2 */
+#define MMC_SET_BLOCKLEN 16 /* ac [31:0] block len R1 */
+#define MMC_READ_SINGLE_BLOCK 17 /* adtc [31:0] data addr R1 */
+#define MMC_READ_MULTIPLE_BLOCK 18 /* adtc [31:0] data addr R1 */
+
+ /* class 3 */
+#define MMC_WRITE_DAT_UNTIL_STOP 20 /* adtc [31:0] data addr R1 */
+
+ /* class 4 */
+#define MMC_SET_BLOCK_COUNT 23 /* adtc [31:0] data addr R1 */
+#define MMC_WRITE_BLOCK 24 /* adtc [31:0] data addr R1 */
+#define MMC_WRITE_MULTIPLE_BLOCK 25 /* adtc R1 */
+#define MMC_PROGRAM_CID 26 /* adtc R1 */
+#define MMC_PROGRAM_CSD 27 /* adtc R1 */
+
+ /* class 6 */
+#define MMC_SET_WRITE_PROT 28 /* ac [31:0] data addr R1b */
+#define MMC_CLR_WRITE_PROT 29 /* ac [31:0] data addr R1b */
+#define MMC_SEND_WRITE_PROT 30 /* adtc [31:0] wpdata addr R1 */
+
+ /* class 5 */
+#define MMC_ERASE_GROUP_START 35 /* ac [31:0] data addr R1 */
+#define MMC_ERASE_GROUP_END 36 /* ac [31:0] data addr R1 */
+#define MMC_ERASE 37 /* ac R1b */
+
+ /* class 9 */
+#define MMC_FAST_IO 39 /* ac <Complex> R4 */
+#define MMC_GO_IRQ_STATE 40 /* bcr R5 */
+
+ /* class 7 */
+#define MMC_LOCK_UNLOCK 42 /* adtc R1b */
+
+ /* class 8 */
+#define MMC_APP_CMD 55 /* ac [31:16] RCA R1 */
+#define MMC_GEN_CMD 56 /* adtc [0] RD/WR R1b */
+
+ /* SD class */
+#define SD_SEND_OP_COND 41 /* bcr [31:0] OCR R3 */
+#define SET_BUS_WIDTH 6 /* ac [1:0] bus width R1 */
+#define SEND_SCR 51 /* adtc [31:0] staff R1 */
+
+/* Don't change the order of these; they are used in dispatch tables */
+enum mmc_rsp_t {
+ RESPONSE_NONE = 0,
+ RESPONSE_R1 = 1,
+ RESPONSE_R1B = 2,
+ RESPONSE_R2_CID = 3,
+ RESPONSE_R2_CSD = 4,
+ RESPONSE_R3 = 5,
+ RESPONSE_R4 = 6,
+ RESPONSE_R5 = 7,
+ RESPONSE_R6 = 8,
+};
+
+
+/*
+ MMC status in R1
+ Type
+ e : error bit
+ s : status bit
+ r : detected and set for the actual command response
+ x : detected and set during command execution. the host must poll
+ the card by sending status command in order to read these bits.
+ Clear condition
+ a : according to the card state
+ b : always related to the previous command. Reception of
+ a valid command will clear it (with a delay of one command)
+ c : clear by read
+ */
+
+#define R1_OUT_OF_RANGE (1 << 31) /* er, c */
+#define R1_ADDRESS_ERROR (1 << 30) /* erx, c */
+#define R1_BLOCK_LEN_ERROR (1 << 29) /* er, c */
+#define R1_ERASE_SEQ_ERROR (1 << 28) /* er, c */
+#define R1_ERASE_PARAM (1 << 27) /* ex, c */
+#define R1_WP_VIOLATION (1 << 26) /* erx, c */
+#define R1_CARD_IS_LOCKED (1 << 25) /* sx, a */
+#define R1_LOCK_UNLOCK_FAILED (1 << 24) /* erx, c */
+#define R1_COM_CRC_ERROR (1 << 23) /* er, b */
+#define R1_ILLEGAL_COMMAND (1 << 22) /* er, b */
+#define R1_CARD_ECC_FAILED (1 << 21) /* ex, c */
+#define R1_CC_ERROR (1 << 20) /* erx, c */
+#define R1_ERROR (1 << 19) /* erx, c */
+#define R1_UNDERRUN (1 << 18) /* ex, c */
+#define R1_OVERRUN (1 << 17) /* ex, c */
+#define R1_CID_CSD_OVERWRITE (1 << 16) /* erx, c, CID/CSD overwrite */
+#define R1_WP_ERASE_SKIP (1 << 15) /* sx, c */
+#define R1_CARD_ECC_DISABLED (1 << 14) /* sx, a */
+#define R1_ERASE_RESET (1 << 13) /* sr, c */
+#define R1_STATUS(x) (x & 0xFFFFE000)
+#define R1_CURRENT_STATE(x) ((x & 0x00001E00) >> 9) /* sx, b (4 bits) */
+#define R1_READY_FOR_DATA (1 << 8) /* sx, a */
+#define R1_APP_CMD (1 << 7) /* sr, c */
+
+enum card_state {
+ CARD_STATE_EMPTY = -1,
+ CARD_STATE_IDLE = 0,
+ CARD_STATE_READY = 1,
+ CARD_STATE_IDENT = 2,
+ CARD_STATE_STBY = 3,
+ CARD_STATE_TRAN = 4,
+ CARD_STATE_DATA = 5,
+ CARD_STATE_RCV = 6,
+ CARD_STATE_PRG = 7,
+ CARD_STATE_DIS = 8,
+};
+
+/* These are unpacked versions of the actual responses */
+
+ struct mmc_response_r1 {
+ u8 cmd;
+ u32 status;
+};
+
+typedef struct mmc_cid {
+ u8 mid;
+ u16 oid;
+ u8 pnm[7]; /* Product name (we null-terminate) */
+ u8 prv;
+ u32 psn;
+ u8 mdt;
+}mmc_cid_t;
+
+typedef struct mmc_csd {
+ u8 csd_structure;
+ u8 spec_vers;
+ u8 taac;
+ u8 nsac;
+ u8 tran_speed;
+ u16 ccc;
+ u8 read_bl_len;
+ u8 read_bl_partial;
+ u8 write_blk_misalign;
+ u8 read_blk_misalign;
+ u8 dsr_imp;
+ u16 c_size;
+ u8 vdd_r_curr_min;
+ u8 vdd_r_curr_max;
+ u8 vdd_w_curr_min;
+ u8 vdd_w_curr_max;
+ u8 c_size_mult;
+ union {
+ struct { /* MMC system specification version 3.1 */
+ u8 erase_grp_size;
+ u8 erase_grp_mult;
+ } v31;
+ struct { /* MMC system specification version 2.2 */
+ u8 sector_size;
+ u8 erase_grp_size;
+ } v22;
+ } erase;
+ u8 wp_grp_size;
+ u8 wp_grp_enable;
+ u8 default_ecc;
+ u8 r2w_factor;
+ u8 write_bl_len;
+ u8 write_bl_partial;
+ u8 file_format_grp;
+ u8 copy;
+ u8 perm_write_protect;
+ u8 tmp_write_protect;
+ u8 file_format;
+ u8 ecc;
+}mmc_csd_t;;
+
+struct mmc_response_r3 {
+ u32 ocr;
+};
+
+#define MMC_VDD_145_150 0x00000001 /* VDD voltage 1.45 - 1.50 */
+#define MMC_VDD_150_155 0x00000002 /* VDD voltage 1.50 - 1.55 */
+#define MMC_VDD_155_160 0x00000004 /* VDD voltage 1.55 - 1.60 */
+#define MMC_VDD_160_165 0x00000008 /* VDD voltage 1.60 - 1.65 */
+#define MMC_VDD_165_170 0x00000010 /* VDD voltage 1.65 - 1.70 */
+#define MMC_VDD_17_18 0x00000020 /* VDD voltage 1.7 - 1.8 */
+#define MMC_VDD_18_19 0x00000040 /* VDD voltage 1.8 - 1.9 */
+#define MMC_VDD_19_20 0x00000080 /* VDD voltage 1.9 - 2.0 */
+#define MMC_VDD_20_21 0x00000100 /* VDD voltage 2.0 ~ 2.1 */
+#define MMC_VDD_21_22 0x00000200 /* VDD voltage 2.1 ~ 2.2 */
+#define MMC_VDD_22_23 0x00000400 /* VDD voltage 2.2 ~ 2.3 */
+#define MMC_VDD_23_24 0x00000800 /* VDD voltage 2.3 ~ 2.4 */
+#define MMC_VDD_24_25 0x00001000 /* VDD voltage 2.4 ~ 2.5 */
+#define MMC_VDD_25_26 0x00002000 /* VDD voltage 2.5 ~ 2.6 */
+#define MMC_VDD_26_27 0x00004000 /* VDD voltage 2.6 ~ 2.7 */
+#define MMC_VDD_27_28 0x00008000 /* VDD voltage 2.7 ~ 2.8 */
+#define MMC_VDD_28_29 0x00010000 /* VDD voltage 2.8 ~ 2.9 */
+#define MMC_VDD_29_30 0x00020000 /* VDD voltage 2.9 ~ 3.0 */
+#define MMC_VDD_30_31 0x00040000 /* VDD voltage 3.0 ~ 3.1 */
+#define MMC_VDD_31_32 0x00080000 /* VDD voltage 3.1 ~ 3.2 */
+#define MMC_VDD_32_33 0x00100000 /* VDD voltage 3.2 ~ 3.3 */
+#define MMC_VDD_33_34 0x00200000 /* VDD voltage 3.3 ~ 3.4 */
+#define MMC_VDD_34_35 0x00400000 /* VDD voltage 3.4 ~ 3.5 */
+#define MMC_VDD_35_36 0x00800000 /* VDD voltage 3.5 ~ 3.6 */
+#define MMC_CARD_BUSY 0x80000000 /* Card Power up status bit */
+
+
+/* CSD field definitions */
+
+#define CSD_STRUCT_VER_1_0 0 /* Valid for system specification 1.0 - 1.2 */
+#define CSD_STRUCT_VER_1_1 1 /* Valid for system specification 1.4 - 2.2 */
+#define CSD_STRUCT_VER_1_2 2 /* Valid for system specification 3.1 */
+
+#define CSD_SPEC_VER_0 0 /* Implements system specification 1.0 - 1.2 */
+#define CSD_SPEC_VER_1 1 /* Implements system specification 1.4 */
+#define CSD_SPEC_VER_2 2 /* Implements system specification 2.0 - 2.2 */
+#define CSD_SPEC_VER_3 3 /* Implements system specification 3.1 */
+
+#if MMC_DEBUG_LEVEL
+
+#define DEBUG(n, args...) \
+ do { \
+ if (n <= MMC_DEBUG_LEVEL) { \
+ printf(args); \
+ } \
+ } while(0)
+#else
+#define DEBUG(n, args...)
+#endif /* MMC_DEBUG_EN */
+
+#endif /* __MMC_PROTOCOL__ */
--- /dev/null
+/*
+ * JzRISC lcd controller
+ *
+ * xiangfu liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <config.h>
+#include <common.h>
+#include <lcd.h>
+
+#include <asm/io.h> /* virt_to_phys() */
+
+#include <asm/jz4740.h>
+#include "nanonote_gpm940b0.h"
+
+#define align2(n) (n)=((((n)+1)>>1)<<1)
+#define align4(n) (n)=((((n)+3)>>2)<<2)
+#define align8(n) (n)=((((n)+7)>>3)<<3)
+
+struct jzfb_info {
+ unsigned int cfg; /* panel mode and pin usage etc. */
+ unsigned int w;
+ unsigned int h;
+ unsigned int bpp; /* bit per pixel */
+ unsigned int fclk; /* frame clk */
+ unsigned int hsw; /* hsync width, in pclk */
+ unsigned int vsw; /* vsync width, in line count */
+ unsigned int elw; /* end of line, in pclk */
+ unsigned int blw; /* begin of line, in pclk */
+ unsigned int efw; /* end of frame, in line count */
+ unsigned int bfw; /* begin of frame, in line count */
+};
+
+static struct jzfb_info jzfb = {
+ MODE_8BIT_SERIAL_TFT | PCLK_N | HSYNC_N | VSYNC_N,
+ 320, 240, 32, 70, 1, 1, 273, 140, 1, 20
+};
+
+vidinfo_t panel_info = {
+ 320, 240, LCD_BPP,
+};
+
+int lcd_line_length;
+
+int lcd_color_fg;
+int lcd_color_bg;
+/*
+ * Frame buffer memory information
+ */
+void *lcd_base; /* Start of framebuffer memory */
+void *lcd_console_address; /* Start of console buffer */
+
+short console_col;
+short console_row;
+
+void lcd_ctrl_init (void *lcdbase);
+void lcd_enable (void);
+void lcd_disable (void);
+
+static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid);
+static void jz_lcd_desc_init(vidinfo_t *vid);
+static int jz_lcd_hw_init( vidinfo_t *vid );
+extern int flush_cache_all(void);
+
+void lcd_ctrl_init (void *lcdbase)
+{
+ __lcd_display_pin_init();
+
+ jz_lcd_init_mem(lcdbase, &panel_info);
+ jz_lcd_desc_init(&panel_info);
+ jz_lcd_hw_init(&panel_info);
+
+ __lcd_display_on() ;
+}
+
+/*
+ * Before enabled lcd controller, lcd registers should be configured correctly.
+ */
+
+void lcd_enable (void)
+{
+ REG_LCD_CTRL &= ~(1<<4); /* LCDCTRL.DIS */
+ REG_LCD_CTRL |= 1<<3; /* LCDCTRL.ENA*/
+}
+
+void lcd_disable (void)
+{
+ REG_LCD_CTRL |= (1<<4); /* LCDCTRL.DIS, regular disable */
+ /* REG_LCD_CTRL |= (1<<3); */ /* LCDCTRL.DIS, quikly disable */
+}
+
+static int jz_lcd_init_mem(void *lcdbase, vidinfo_t *vid)
+{
+ u_long palette_mem_size;
+ struct jz_fb_info *fbi = &vid->jz_fb;
+ int fb_size = vid->vl_row * (vid->vl_col * NBITS (vid->vl_bpix)) / 8;
+
+ fbi->screen = (u_long)lcdbase;
+ fbi->palette_size = 256;
+ palette_mem_size = fbi->palette_size * sizeof(u16);
+
+ debug("jz_lcd.c palette_mem_size = 0x%08lx\n", (u_long) palette_mem_size);
+ /* locate palette and descs at end of page following fb */
+ fbi->palette = (u_long)lcdbase + fb_size + PAGE_SIZE - palette_mem_size;
+
+ return 0;
+}
+
+static void jz_lcd_desc_init(vidinfo_t *vid)
+{
+ struct jz_fb_info * fbi;
+ fbi = &vid->jz_fb;
+ fbi->dmadesc_fblow = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 3*16);
+ fbi->dmadesc_fbhigh = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 2*16);
+ fbi->dmadesc_palette = (struct jz_fb_dma_descriptor *)((unsigned int)fbi->palette - 1*16);
+
+ #define BYTES_PER_PANEL (vid->vl_col * vid->vl_row * NBITS(vid->vl_bpix) / 8)
+
+ /* populate descriptors */
+ fbi->dmadesc_fblow->fdadr = virt_to_phys(fbi->dmadesc_fblow);
+ fbi->dmadesc_fblow->fsadr = virt_to_phys((void *)(fbi->screen + BYTES_PER_PANEL));
+ fbi->dmadesc_fblow->fidr = 0;
+ fbi->dmadesc_fblow->ldcmd = BYTES_PER_PANEL / 4 ;
+
+ fbi->fdadr1 = virt_to_phys(fbi->dmadesc_fblow); /* only used in dual-panel mode */
+
+ fbi->dmadesc_fbhigh->fsadr = virt_to_phys((void *)fbi->screen);
+ fbi->dmadesc_fbhigh->fidr = 0;
+ fbi->dmadesc_fbhigh->ldcmd = BYTES_PER_PANEL / 4; /* length in word */
+
+ fbi->dmadesc_palette->fsadr = virt_to_phys((void *)fbi->palette);
+ fbi->dmadesc_palette->fidr = 0;
+ fbi->dmadesc_palette->ldcmd = (fbi->palette_size * 2)/4 | (1<<28);
+
+ if(NBITS(vid->vl_bpix) < 12)
+ {
+ /* assume any mode with <12 bpp is palette driven */
+ fbi->dmadesc_palette->fdadr = virt_to_phys(fbi->dmadesc_fbhigh);
+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys(fbi->dmadesc_palette);
+ /* flips back and forth between pal and fbhigh */
+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_palette);
+ } else {
+ /* palette shouldn't be loaded in true-color mode */
+ fbi->dmadesc_fbhigh->fdadr = virt_to_phys((void *)fbi->dmadesc_fbhigh);
+ fbi->fdadr0 = virt_to_phys(fbi->dmadesc_fbhigh); /* no pal just fbhigh */
+ }
+
+ flush_cache_all();
+}
+
+static int jz_lcd_hw_init(vidinfo_t *vid)
+{
+ struct jz_fb_info *fbi = &vid->jz_fb;
+ unsigned int val = 0;
+ unsigned int pclk;
+ unsigned int stnH;
+ int pll_div;
+
+ /* Setting Control register */
+ switch (jzfb.bpp) {
+ case 1:
+ val |= LCD_CTRL_BPP_1;
+ break;
+ case 2:
+ val |= LCD_CTRL_BPP_2;
+ break;
+ case 4:
+ val |= LCD_CTRL_BPP_4;
+ break;
+ case 8:
+ val |= LCD_CTRL_BPP_8;
+ break;
+ case 15:
+ val |= LCD_CTRL_RGB555;
+ case 16:
+ val |= LCD_CTRL_BPP_16;
+ break;
+ case 17 ... 32:
+ val |= LCD_CTRL_BPP_18_24; /* target is 4bytes/pixel */
+ break;
+
+ default:
+ printf("jz_lcd.c The BPP %d is not supported\n", jzfb.bpp);
+ val |= LCD_CTRL_BPP_16;
+ break;
+ }
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ switch (jzfb.bpp) {
+ case 1:
+ /* val |= LCD_CTRL_PEDN; */
+ case 2:
+ val |= LCD_CTRL_FRC_2;
+ break;
+ case 4:
+ val |= LCD_CTRL_FRC_4;
+ break;
+ case 8:
+ default:
+ val |= LCD_CTRL_FRC_16;
+ break;
+ }
+ break;
+ }
+
+ val |= LCD_CTRL_BST_16; /* Burst Length is 16WORD=64Byte */
+ val |= LCD_CTRL_OFUP; /* OutFIFO underrun protect */
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ switch (jzfb.cfg & STN_DAT_PINMASK) {
+ case STN_DAT_PIN1:
+ /* Do not adjust the hori-param value. */
+ break;
+ case STN_DAT_PIN2:
+ align2(jzfb.hsw);
+ align2(jzfb.elw);
+ align2(jzfb.blw);
+ break;
+ case STN_DAT_PIN4:
+ align4(jzfb.hsw);
+ align4(jzfb.elw);
+ align4(jzfb.blw);
+ break;
+ case STN_DAT_PIN8:
+ align8(jzfb.hsw);
+ align8(jzfb.elw);
+ align8(jzfb.blw);
+ break;
+ }
+ break;
+ }
+
+ REG_LCD_CTRL = val;
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_STN_MONO_DUAL:
+ case MODE_STN_COLOR_DUAL:
+ case MODE_STN_MONO_SINGLE:
+ case MODE_STN_COLOR_SINGLE:
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
+ stnH = jzfb.h >> 1;
+ else
+ stnH = jzfb.h;
+
+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
+ REG_LCD_HSYNC = ((jzfb.blw+jzfb.w) << 16) | (jzfb.blw+jzfb.w+jzfb.hsw);
+
+ /* Screen setting */
+ REG_LCD_VAT = ((jzfb.blw + jzfb.w + jzfb.hsw + jzfb.elw) << 16) | (stnH + jzfb.vsw + jzfb.bfw + jzfb.efw);
+ REG_LCD_DAH = (jzfb.blw << 16) | (jzfb.blw + jzfb.w);
+ REG_LCD_DAV = (0 << 16) | (stnH);
+
+ /* AC BIAs signal */
+ REG_LCD_PS = (0 << 16) | (stnH+jzfb.vsw+jzfb.efw+jzfb.bfw);
+
+ break;
+
+ case MODE_TFT_GEN:
+ case MODE_TFT_SHARP:
+ case MODE_TFT_CASIO:
+ case MODE_TFT_SAMSUNG:
+ case MODE_8BIT_SERIAL_TFT:
+ case MODE_TFT_18BIT:
+ REG_LCD_VSYNC = (0 << 16) | jzfb.vsw;
+ REG_LCD_HSYNC = (0 << 16) | jzfb.hsw;
+ REG_LCD_DAV =((jzfb.vsw+jzfb.bfw) << 16) | (jzfb.vsw +jzfb.bfw+jzfb.h);
+ REG_LCD_DAH = ((jzfb.hsw + jzfb.blw) << 16) | (jzfb.hsw + jzfb.blw + jzfb.w );
+ REG_LCD_VAT = (((jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw)) << 16) \
+ | (jzfb.vsw + jzfb.bfw + jzfb.h + jzfb.efw);
+ break;
+ }
+
+ switch (jzfb.cfg & MODE_MASK) {
+ case MODE_TFT_SAMSUNG:
+ {
+ unsigned int total, tp_s, tp_e, ckv_s, ckv_e;
+ unsigned int rev_s, rev_e, inv_s, inv_e;
+
+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+
+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
+ tp_s = jzfb.blw + jzfb.w + 1;
+ tp_e = tp_s + 1;
+ /* ckv_s = tp_s - jz_clocks.pixclk/(1000000000/4100); */
+ ckv_s = tp_s - pclk/(1000000000/4100);
+ ckv_e = tp_s + total;
+ rev_s = tp_s - 11; /* -11.5 clk */
+ rev_e = rev_s + total;
+ inv_s = tp_s;
+ inv_e = inv_s + total;
+ REG_LCD_CLS = (tp_s << 16) | tp_e;
+ REG_LCD_PS = (ckv_s << 16) | ckv_e;
+ REG_LCD_SPL = (rev_s << 16) | rev_e;
+ REG_LCD_REV = (inv_s << 16) | inv_e;
+ jzfb.cfg |= STFT_REVHI | STFT_SPLHI;
+ break;
+ }
+ case MODE_TFT_SHARP:
+ {
+ unsigned int total, cls_s, cls_e, ps_s, ps_e;
+ unsigned int spl_s, spl_e, rev_s, rev_e;
+ total = jzfb.blw + jzfb.w + jzfb.elw + jzfb.hsw;
+ spl_s = 1;
+ spl_e = spl_s + 1;
+ cls_s = 0;
+ cls_e = total - 60; /* > 4us (pclk = 80ns) */
+ ps_s = cls_s;
+ ps_e = cls_e;
+ rev_s = total - 40; /* > 3us (pclk = 80ns) */
+ rev_e = rev_s + total;
+ jzfb.cfg |= STFT_PSHI;
+ REG_LCD_SPL = (spl_s << 16) | spl_e;
+ REG_LCD_CLS = (cls_s << 16) | cls_e;
+ REG_LCD_PS = (ps_s << 16) | ps_e;
+ REG_LCD_REV = (rev_s << 16) | rev_e;
+ break;
+ }
+ case MODE_TFT_CASIO:
+ break;
+ }
+
+ /* Configure the LCD panel */
+ REG_LCD_CFG = jzfb.cfg;
+
+ /* Timing setting */
+ __cpm_stop_lcd();
+
+ val = jzfb.fclk; /* frame clk */
+ if ( (jzfb.cfg & MODE_MASK) != MODE_8BIT_SERIAL_TFT) {
+ pclk = val * (jzfb.w + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+ } else {
+ /* serial mode: Hsync period = 3*Width_Pixel */
+ pclk = val * (jzfb.w*3 + jzfb.hsw + jzfb.elw + jzfb.blw) *
+ (jzfb.h + jzfb.vsw + jzfb.efw + jzfb.bfw); /* Pixclk */
+ }
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL))
+ pclk = (pclk * 3);
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_SINGLE) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ pclk = pclk >> ((jzfb.cfg & STN_DAT_PINMASK) >> 4);
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ pclk >>= 1;
+
+ pll_div = ( REG_CPM_CPCCR & CPM_CPCCR_PCS ); /* clock source,0:pllout/2 1: pllout */
+ pll_div = pll_div ? 1 : 2 ;
+ val = ( __cpm_get_pllout()/pll_div ) / pclk;
+ val--;
+ if ( val > 0x1ff ) {
+ printf("CPM_LPCDR too large, set it to 0x1ff\n");
+ val = 0x1ff;
+ }
+ __cpm_set_pixdiv(val);
+
+ val = pclk * 3 ; /* LCDClock > 2.5*Pixclock */
+ if ( val > 150000000 ) {
+ printf("Warning: LCDClock=%d\n, LCDClock must less or equal to 150MHz.\n", val);
+ printf("Change LCDClock to 150MHz\n");
+ val = 150000000;
+ }
+ val = ( __cpm_get_pllout()/pll_div ) / val;
+ val--;
+ if ( val > 0x1f ) {
+ printf("CPM_CPCCR.LDIV too large, set it to 0x1f\n");
+ val = 0x1f;
+ }
+ __cpm_set_ldiv( val );
+ REG_CPM_CPCCR |= CPM_CPCCR_CE ; /* update divide */
+
+ __cpm_start_lcd();
+ udelay(1000);
+
+ REG_LCD_DA0 = fbi->fdadr0; /* frame descripter*/
+
+ if (((jzfb.cfg & MODE_MASK) == MODE_STN_COLOR_DUAL) ||
+ ((jzfb.cfg & MODE_MASK) == MODE_STN_MONO_DUAL))
+ REG_LCD_DA1 = fbi->fdadr1; /* frame descripter*/
+
+ return 0;
+}
+
+void lcd_setcolreg (ushort regno, ushort red, ushort green, ushort blue)
+{
+}
+
+void lcd_initcolregs (void)
+{
+}
--- /dev/null
+/*
+ * JzRISC lcd controller
+ *
+ * xiangfu liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#ifndef __QI_LB60_GPM940B0_H__
+#define __QI_LB60_GPM940B0_H__
+
+#include <asm/io.h>
+
+#define mdelay(n) udelay((n)*1000)
+
+#define NR_PALETTE 256
+
+struct lcd_desc{
+ unsigned int next_desc; /* LCDDAx */
+ unsigned int databuf; /* LCDSAx */
+ unsigned int frame_id; /* LCDFIDx */
+ unsigned int cmd; /* LCDCMDx */
+};
+
+#define MODE_MASK 0x0f
+#define MODE_TFT_GEN 0x00
+#define MODE_TFT_SHARP 0x01
+#define MODE_TFT_CASIO 0x02
+#define MODE_TFT_SAMSUNG 0x03
+#define MODE_CCIR656_NONINT 0x04
+#define MODE_CCIR656_INT 0x05
+#define MODE_STN_COLOR_SINGLE 0x08
+#define MODE_STN_MONO_SINGLE 0x09
+#define MODE_STN_COLOR_DUAL 0x0a
+#define MODE_STN_MONO_DUAL 0x0b
+#define MODE_8BIT_SERIAL_TFT 0x0c
+
+#define MODE_TFT_18BIT (1<<7)
+
+#define STN_DAT_PIN1 (0x00 << 4)
+#define STN_DAT_PIN2 (0x01 << 4)
+#define STN_DAT_PIN4 (0x02 << 4)
+#define STN_DAT_PIN8 (0x03 << 4)
+#define STN_DAT_PINMASK STN_DAT_PIN8
+
+#define STFT_PSHI (1 << 15)
+#define STFT_CLSHI (1 << 14)
+#define STFT_SPLHI (1 << 13)
+#define STFT_REVHI (1 << 12)
+
+#define SYNC_MASTER (0 << 16)
+#define SYNC_SLAVE (1 << 16)
+
+#define DE_P (0 << 9)
+#define DE_N (1 << 9)
+
+#define PCLK_P (0 << 10)
+#define PCLK_N (1 << 10)
+
+#define HSYNC_P (0 << 11)
+#define HSYNC_N (1 << 11)
+
+#define VSYNC_P (0 << 8)
+#define VSYNC_N (1 << 8)
+
+#define DATA_NORMAL (0 << 17)
+#define DATA_INVERSE (1 << 17)
+
+
+/* Jz LCDFB supported I/O controls. */
+#define FBIOSETBACKLIGHT 0x4688
+#define FBIODISPON 0x4689
+#define FBIODISPOFF 0x468a
+#define FBIORESET 0x468b
+#define FBIOPRINT_REG 0x468c
+
+/*
+ * LCD panel specific definition
+ */
+#define MODE 0xc9 /* 8bit serial RGB */
+#define SPEN (32*2+21) /*LCD_SPL */
+#define SPCK (32*2+23) /*LCD_CLS */
+#define SPDA (32*2+22) /*LCD_D12 */
+#define LCD_RET (32*3+27)
+
+#define __spi_write_reg1(reg, val) \
+do { \
+ unsigned char no;\
+ unsigned short value;\
+ unsigned char a=0;\
+ unsigned char b=0;\
+ a=reg;\
+ b=val;\
+ __gpio_set_pin(SPEN);\
+ __gpio_set_pin(SPCK);\
+ __gpio_clear_pin(SPDA);\
+ __gpio_clear_pin(SPEN);\
+ udelay(25);\
+ value=((a<<8)|(b&0xFF));\
+ for(no=0;no<16;no++)\
+ {\
+ __gpio_clear_pin(SPCK);\
+ if((value&0x8000)==0x8000)\
+ __gpio_set_pin(SPDA);\
+ else\
+ __gpio_clear_pin(SPDA);\
+ udelay(25);\
+ __gpio_set_pin(SPCK);\
+ value=(value<<1); \
+ udelay(25);\
+ }\
+ __gpio_set_pin(SPEN);\
+ udelay(100);\
+} while (0)
+
+#define __spi_write_reg(reg, val) \
+do {\
+ __spi_write_reg1((reg<<2|2), val);\
+ udelay(100); \
+}while(0)
+
+#define __lcd_special_pin_init() \
+do { \
+ __gpio_as_output(SPEN); /* use SPDA */\
+ __gpio_as_output(SPCK); /* use SPCK */\
+ __gpio_as_output(SPDA); /* use SPDA */\
+ __gpio_as_output(LCD_RET);\
+} while (0)
+
+#define __lcd_special_on() \
+do { \
+ udelay(50);\
+ __spi_write_reg1(0x05, 0x16); \
+ __spi_write_reg1(0x04, 0x0b); \
+ __spi_write_reg1(0x07, 0x8d); \
+ __spi_write_reg1(0x01, 0x95); \
+ __spi_write_reg1(0x08, 0xc0); \
+ __spi_write_reg1(0x03, 0x40); \
+ __spi_write_reg1(0x06, 0x75); \
+ __spi_write_reg1(0x13, 0x01); \
+ __spi_write_reg1(0x05, 0x57); \
+} while (0)
+
+#define __lcd_special_off() \
+do { \
+ __spi_write_reg1(0x05, 0x5e); \
+} while (0)
+
+#define __lcd_display_pin_init() \
+do { \
+ __lcd_special_pin_init();\
+ __gpio_as_pwm();\
+ __lcd_set_backlight_level(8);\
+} while (0)
+
+#define __lcd_display_on() \
+do { \
+ __lcd_set_backlight_level(8); \
+ __lcd_special_on();\
+} while (0)
+
+#define __lcd_display_off() \
+do { \
+ __lcd_set_backlight_level(0); \
+ __lcd_special_off();\
+} while (0)
+
+#define __lcd_set_backlight_level(n)\
+do { \
+ __gpio_as_output(LCD_RET); \
+ __gpio_set_pin(LCD_RET); \
+} while (0)
+
+#if defined(CONFIG_SAKC)
+#define __lcd_close_backlight() \
+do { \
+ __gpio_as_output(GPIO_PWM); \
+ __gpio_clear_pin(GPIO_PWM); \
+} while (0)
+#endif
+
+#if defined(CONFIG_SAKC)
+#define __lcd_display_pin_init() \
+do { \
+ __cpm_start_tcu(); \
+ __lcd_special_pin_init(); \
+} while (0)
+
+#define __lcd_display_on() \
+do { \
+ __lcd_special_on(); \
+} while (0)
+
+#define __lcd_display_off() \
+do { \
+ __lcd_special_off(); \
+} while (0)
+#else
+#define __lcd_display_pin_init() \
+do { \
+ __cpm_start_tcu(); \
+ __lcd_special_pin_init(); \
+} while (0)
+
+#define __lcd_display_on() \
+do { \
+ __gpio_set_pin(GPIO_DISP_OFF_N); \
+ __lcd_special_on(); \
+} while (0)
+
+#define __lcd_display_off() \
+do { \
+ __lcd_special_off(); \
+ __gpio_clear_pin(GPIO_DISP_OFF_N); \
+} while (0)
+#endif
+
+#endif /* __QI_LB60_GPM940B0_H__ */
--- /dev/null
+/*
+ * for jz4740 usb boot
+ *
+ * Copyright (c) 2009 Xiangfu Liu <xiangfu.z@gmail.com>
+ *
+ * See file CREDITS for list of people who contributed to this
+ * project.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+ .set noreorder
+ .globl usb_boot
+ .text
+
+//----------------------------------------------------------------------
+// Both NAND and USB boot load data to D-Cache first, then transfer
+// data from D-Cache to I-Cache, and jump to execute the code in I-Cache.
+// So init caches first and then dispatch to a proper boot routine.
+//----------------------------------------------------------------------
+
+.macro load_addr reg addr
+ li \reg, 0x80000000
+ addiu \reg, \reg, \addr
+ la $2, usbboot_begin
+ subu \reg, \reg, $2
+.endm
+
+usb_boot:
+ //--------------------------------------------------------------
+ // Initialize PLL: set ICLK to 84MHz and HCLK to 42MHz.
+ //--------------------------------------------------------------
+ la $9, 0xB0000000 // CPCCR: Clock Control Register
+ la $8, 0x42041110 // I:S:M:P=1:2:2:2
+ sw $8, 0($9)
+
+ la $9, 0xB0000010 // CPPCR: PLL Control Register
+ la $8, 0x06000120 // M=12 N=0 D=0 CLK=12*(M+2)/(N+2)
+ sw $8, 0($9)
+
+ mtc0 $0, $26 // CP0_ERRCTL, restore WST reset state
+ nop
+
+ mtc0 $0, $16 // CP0_CONFIG
+ nop
+
+ // Relocate code to beginning of the ram
+
+ la $2, usbboot_begin
+ la $3, usbboot_end
+ li $4, 0x80000000
+
+1:
+ lw $5, 0($2)
+ sw $5, 0($4)
+ addiu $2, $2, 4
+ bne $2, $3, 1b
+ addiu $4, $4, 4
+
+ li $2, 0x80000000
+ ori $3, $2, 0
+ addiu $3, $3, usbboot_end
+ la $4, usbboot_begin
+ subu $3, $3, $4
+
+
+2:
+ cache 0x0, 0($2) // Index_Invalidate_I
+ cache 0x1, 0($2) // Index_Writeback_Inv_D
+ addiu $2, $2, 32
+ subu $4, $3, $2
+ bgtz $4, 2b
+ nop
+
+ load_addr $3, usb_boot_return
+
+ jr $3
+
+usbboot_begin:
+
+init_caches:
+ li $2, 3 // cacheable for kseg0 access
+ mtc0 $2, $16 // CP0_CONFIG
+ nop
+
+ li $2, 0x20000000 // enable idx-store-data cache insn
+ mtc0 $2, $26 // CP0_ERRCTL
+
+ ori $2, $28, 0 // start address
+ ori $3, $2, 0x3fe0 // end address, total 16KB
+ mtc0 $0, $28, 0 // CP0_TAGLO
+ mtc0 $0, $28, 1 // CP0_DATALO
+cache_clear_a_line:
+ cache 0x8, 0($2) // Index_Store_Tag_I
+ cache 0x9, 0($2) // Index_Store_Tag_D
+ bne $2, $3, cache_clear_a_line
+ addiu $2, $2, 32 // increment CACHE_LINE_SIZE
+
+ ori $2, $28, 0 // start address
+ ori $3, $2, 0x3fe0 // end address, total 16KB
+ la $4, 0x1ffff000 // physical address and 4KB page mask
+cache_alloc_a_line:
+ and $5, $2, $4
+ ori $5, $5, 1 // V bit of the physical tag
+ mtc0 $5, $28, 0 // CP0_TAGLO
+ cache 0x8, 0($2) // Index_Store_Tag_I
+ cache 0x9, 0($2) // Index_Store_Tag_D
+ bne $2, $3, cache_alloc_a_line
+ addiu $2, $2, 32 // increment CACHE_LINE_SIZE
+
+ nop
+ nop
+ nop
+ //--------------------------------------------------------------
+ // Transfer data from dcache to icache, then jump to icache.
+ //
+ // Input parameters:
+ //
+ // $19: data length in bytes
+ // $20: jump target address
+ //--------------------------------------------------------------
+xfer_d2i:
+
+ ori $8, $20, 0
+ addu $9, $8, $19 // total 16KB
+
+1:
+ cache 0x0, 0($8) // Index_Invalidate_I
+ cache 0x1, 0($8) // Index_Writeback_Inv_D
+ bne $8, $9, 1b
+ addiu $8, $8, 32
+
+ // flush write-buffer
+ sync
+
+ // Invalidate BTB
+ mfc0 $8, $16, 7 // CP0_CONFIG
+ nop
+ ori $8, 2
+ mtc0 $8, $16, 7
+ nop
+
+ // Overwrite config to disable ram initalisation
+ li $2, 0xff
+ sb $2, 20($20)
+
+ jalr $20
+ nop
+
+icache_return:
+ //--------------------------------------------------------------
+ // User code can return to here after executing itself in
+ // icache, by jumping to $31.
+ //--------------------------------------------------------------
+ b usb_boot_return
+ nop
+
+
+usb_boot_return:
+ //--------------------------------------------------------------
+ // Enable the USB PHY
+ //--------------------------------------------------------------
+ la $9, 0xB0000024 // CPM_SCR
+ lw $8, 0($9)
+ ori $8, 0x40 // USBPHY_ENABLE
+ sw $8, 0($9)
+
+ //--------------------------------------------------------------
+ // Initialize USB registers
+ //--------------------------------------------------------------
+ la $27, 0xb3040000 // USB registers base address
+
+ sb $0, 0x0b($27) // INTRUSBE: disable common USB interrupts
+ sh $0, 0x06($27) // INTRINE: disable EPIN interrutps
+ sh $0, 0x08($27) // INTROUTE: disable EPOUT interrutps
+
+ li $9, 0x61
+ sb $9, 0x01($27) // POWER: HSENAB | SUSPENDM | SOFTCONN
+
+ //--------------------------------------------------------------
+ // Initialize USB states
+ //--------------------------------------------------------------
+ li $22, 0 // set EP0 to IDLE state
+ li $23, 1 // no data stage
+
+ //--------------------------------------------------------------
+ // Main loop of polling the usb commands
+ //--------------------------------------------------------------
+usb_command_loop:
+ lbu $9, 0x0a($27) // read INTRUSB
+ andi $9, 0x04 // check USB_INTR_RESET
+ beqz $9, check_intr_ep0in
+ nop
+
+ //--------------------------------------------------------------
+ // 1. Handle USB reset interrupt
+ //--------------------------------------------------------------
+handle_reset_intr:
+ lbu $9, 0x01($27) // read POWER
+ andi $9, 0x10 // test HS_MODE
+ bnez $9, _usb_set_maxpktsize
+ li $9, 512 // max packet size of HS mode
+ li $9, 64 // max packet size of FS mode
+
+_usb_set_maxpktsize:
+ li $8, 1
+ sb $8, 0x0e($27) // set INDEX 1
+
+ sh $9, 0x10($27) // INMAXP
+ sb $0, 0x13($27) // INCSRH
+ sh $9, 0x14($27) // OUTMAXP
+ sb $0, 0x17($27) // OUTCSRH
+
+_usb_flush_fifo:
+ li $8, 0x48 // INCSR_CDT && INCSR_FF
+ sb $8, 0x12($27) // INCSR
+ li $8, 0x90 // OUTCSR_CDT && OUTCSR_FF
+ sb $8, 0x16($27) // OUTCSR
+
+ li $22, 0 // set EP0 to IDLE state
+ li $23, 1 // no data stage
+
+ //--------------------------------------------------------------
+ // 2. Check and handle EP0 interrupt
+ //--------------------------------------------------------------
+check_intr_ep0in:
+ lhu $10, 0x02($27) // read INTRIN
+ andi $9, $10, 0x1 // check EP0 interrupt
+ beqz $9, check_intr_ep1in
+ nop
+
+handle_ep0_intr:
+ sb $0, 0x0e($27) // set INDEX 0
+ lbu $11, 0x12($27) // read CSR0
+
+ andi $9, $11, 0x04 // check SENTSTALL
+ beqz $9, _ep0_setupend
+ nop
+
+_ep0_sentstall:
+ andi $9, $11, 0xdb
+ sb $9, 0x12($27) // clear SENDSTALL and SENTSTALL
+ li $22, 0 // set EP0 to IDLE state
+
+_ep0_setupend:
+ andi $9, $11, 0x10 // check SETUPEND
+ beqz $9, ep0_idle_state
+ nop
+
+ ori $9, $11, 0x80
+ sb $9, 0x12($27) // set SVDSETUPEND
+ li $22, 0 // set EP0 to IDLE state
+
+ep0_idle_state:
+ bnez $22, ep0_tx_state
+ nop
+
+ //--------------------------------------------------------------
+ // 2.1 Handle EP0 IDLE state interrupt
+ //--------------------------------------------------------------
+ andi $9, $11, 0x01 // check OUTPKTRDY
+ beqz $9, check_intr_ep1in
+ nop
+
+ //--------------------------------------------------------------
+ // Read 8-bytes setup packet from the FIFO
+ //--------------------------------------------------------------
+ lw $25, 0x20($27) // first word of setup packet
+ lw $26, 0x20($27) // second word of setup packet
+
+ andi $9, $25, 0x60 // bRequestType & USB_TYPE_MASK
+ beqz $9, _ep0_std_req
+ nop
+
+ //--------------------------------------------------------------
+ // 2.1.1 Vendor-specific setup request
+ //--------------------------------------------------------------
+_ep0_vend_req:
+ li $22, 0 // set EP0 to IDLE state
+ li $23, 1 // NoData = 1
+
+ andi $9, $25, 0xff00 // check bRequest
+ srl $9, $9, 8
+ beqz $9, __ep0_get_cpu_info
+ sub $8, $9, 0x1
+ beqz $8, __ep0_set_data_address
+ sub $8, $9, 0x2
+ beqz $8, __ep0_set_data_length
+ sub $8, $9, 0x3
+ beqz $8, __ep0_flush_caches
+ sub $8, $9, 0x4
+ beqz $8, __ep0_prog_start1
+ sub $8, $9, 0x5
+ beqz $8, __ep0_prog_start2
+ nop
+ b _ep0_idle_state_fini // invalid request
+ nop
+
+__ep0_get_cpu_info:
+ load_addr $20, cpu_info_data // data pointer to transfer
+ li $21, 8 // bytes left to transfer
+ li $22, 1 // set EP0 to TX state
+ li $23, 0 // NoData = 0
+
+ b _ep0_idle_state_fini
+ nop
+
+__ep0_set_data_address:
+ li $9, 0xffff0000
+ and $9, $25, $9
+ andi $8, $26, 0xffff
+ or $20, $9, $8 // data address of next transfer
+
+ b _ep0_idle_state_fini
+ nop
+
+__ep0_set_data_length:
+ li $9, 0xffff0000
+ and $9, $25, $9
+ andi $8, $26, 0xffff
+ or $21, $9, $8 // data length of next transfer
+
+ li $9, 0x48 // SVDOUTPKTRDY and DATAEND
+ sb $9, 0x12($27) // CSR0
+
+ // We must write packet to FIFO before EP1-IN interrupt here.
+ b handle_epin1_intr
+ nop
+
+__ep0_flush_caches:
+ // Flush dcache and invalidate icache.
+ li $8, 0x80000000
+ addi $9, $8, 0x3fe0 // total 16KB
+
+1:
+ cache 0x0, 0($8) // Index_Invalidate_I
+ cache 0x1, 0($8) // Index_Writeback_Inv_D
+ bne $8, $9, 1b
+ addiu $8, $8, 32
+
+ // flush write-buffer
+ sync
+
+ // Invalidate BTB
+ mfc0 $8, $16, 7 // CP0_CONFIG
+ nop
+ ori $8, 2
+ mtc0 $8, $16, 7
+ nop
+
+ b _ep0_idle_state_fini
+ nop
+
+__ep0_prog_start1:
+ li $9, 0x48 // SVDOUTPKTRDY and DATAEND
+ sb $9, 0x12($27) // CSR0
+
+ li $9, 0xffff0000
+ and $9, $25, $9
+ andi $8, $26, 0xffff
+ or $20, $9, $8 // target address
+
+ b xfer_d2i
+ li $19, 0x2000 // 16KB data length
+
+__ep0_prog_start2:
+ li $9, 0x48 // SVDOUTPKTRDY and DATAEND
+ sb $9, 0x12($27) // CSR0
+
+ li $9, 0xffff0000
+ and $9, $25, $9
+ andi $8, $26, 0xffff
+ or $20, $9, $8 // target address
+
+ jalr $20 // jump, and place the return address in $31
+ nop
+
+__ep0_prog_start2_return:
+ // User code can return to here after executing itself, by jumping to $31.
+ b usb_boot_return
+ nop
+
+ //--------------------------------------------------------------
+ // 2.1.2 Standard setup request
+ //--------------------------------------------------------------
+_ep0_std_req:
+ andi $12, $25, 0xff00 // check bRequest
+ srl $12, $12, 8
+ sub $9, $12, 0x05 // check USB_REQ_SET_ADDRESS
+ bnez $9, __ep0_req_set_config
+ nop
+
+ //--------------------------------------------------------------
+ // Handle USB_REQ_SET_ADDRESS
+ //--------------------------------------------------------------
+__ep0_req_set_addr:
+ srl $9, $25, 16 // get wValue
+ sb $9, 0x0($27) // set FADDR
+ li $23, 1 // NoData = 1
+ b _ep0_idle_state_fini
+ nop
+
+__ep0_req_set_config:
+ sub $9, $12, 0x09 // check USB_REQ_SET_CONFIGURATION
+ bnez $9, __ep0_req_get_desc
+ nop
+
+ //--------------------------------------------------------------
+ // Handle USB_REQ_SET_CONFIGURATION
+ //--------------------------------------------------------------
+ li $23, 1 // NoData = 1
+ b _ep0_idle_state_fini
+ nop
+
+__ep0_req_get_desc:
+ sub $9, $12, 0x06 // check USB_REQ_GET_DESCRIPTOR
+ bnez $9, _ep0_idle_state_fini
+ li $23, 1 // NoData = 1
+
+ //--------------------------------------------------------------
+ // Handle USB_REQ_GET_DESCRIPTOR
+ //--------------------------------------------------------------
+ li $23, 0 // NoData = 0
+
+ srl $9, $25, 24 // wValue >> 8
+ sub $8, $9, 0x01 // check USB_DT_DEVICE
+ beqz $8, ___ep0_get_dev_desc
+ srl $21, $26, 16 // get wLength
+ sub $8, $9, 0x02 // check USB_DT_CONFIG
+ beqz $8, ___ep0_get_conf_desc
+ sub $8, $9, 0x03 // check USB_DT_STRING
+ beqz $8, ___ep0_get_string_desc
+ sub $8, $9, 0x06 // check USB_DT_DEVICE_QUALIFIER
+ beqz $8, ___ep0_get_dev_qualifier
+ nop
+ b _ep0_idle_state_fini
+ nop
+
+___ep0_get_dev_desc:
+ load_addr $20, device_desc // data pointer
+ li $22, 1 // set EP0 to TX state
+ sub $8, $21, 18
+ blez $8, _ep0_idle_state_fini // wLength <= 18
+ nop
+ li $21, 18 // max length of device_desc
+ b _ep0_idle_state_fini
+ nop
+
+___ep0_get_dev_qualifier:
+ load_addr $20, dev_qualifier // data pointer
+ li $22, 1 // set EP0 to TX state
+ sub $8, $21, 10
+ blez $8, _ep0_idle_state_fini // wLength <= 10
+ nop
+ li $21, 10 // max length of dev_qualifier
+ b _ep0_idle_state_fini
+ nop
+
+___ep0_get_conf_desc:
+ load_addr $20, config_desc_fs // data pointer of FS mode
+ lbu $8, 0x01($27) // read POWER
+ andi $8, 0x10 // test HS_MODE
+ beqz $8, ___ep0_get_conf_desc2
+ nop
+ load_addr $20, config_desc_hs // data pointer of HS mode
+
+___ep0_get_conf_desc2:
+ li $22, 1 // set EP0 to TX state
+ sub $8, $21, 32
+ blez $8, _ep0_idle_state_fini // wLength <= 32
+ nop
+ li $21, 32 // max length of config_desc
+ b _ep0_idle_state_fini
+ nop
+
+___ep0_get_string_desc:
+ li $22, 1 // set EP0 to TX state
+
+ srl $9, $25, 16 // wValue & 0xff
+ andi $9, 0xff
+
+ sub $8, $9, 1
+ beqz $8, ___ep0_get_string_manufacture
+ sub $8, $9, 2
+ beqz $8, ___ep0_get_string_product
+ nop
+
+___ep0_get_string_lang_ids:
+ load_addr $20, string_lang_ids // data pointer
+ b _ep0_idle_state_fini
+ li $21, 4 // data length
+
+___ep0_get_string_manufacture:
+ load_addr $20, string_manufacture // data pointer
+ b _ep0_idle_state_fini
+ li $21, 16 // data length
+
+___ep0_get_string_product:
+ load_addr $20, string_product // data pointer
+ b _ep0_idle_state_fini
+ li $21, 46 // data length
+
+_ep0_idle_state_fini:
+ li $9, 0x40 // SVDOUTPKTRDY
+ beqz $23, _ep0_idle_state_fini2
+ nop
+ ori $9, $9, 0x08 // DATAEND
+_ep0_idle_state_fini2:
+ sb $9, 0x12($27) // CSR0
+ beqz $22, check_intr_ep1in
+ nop
+
+ //--------------------------------------------------------------
+ // 2.2 Handle EP0 TX state interrupt
+ //--------------------------------------------------------------
+ep0_tx_state:
+ sub $9, $22, 1
+ bnez $9, check_intr_ep1in
+ nop
+
+ sub $9, $21, 64 // max packetsize
+ blez $9, _ep0_tx_state2 // data count <= 64
+ ori $19, $21, 0
+ li $19, 64
+
+_ep0_tx_state2:
+ beqz $19, _ep0_tx_state3 // send ZLP
+ ori $18, $19, 0 // record bytes to be transferred
+ sub $21, $21, $19 // decrement data count
+
+_ep0_fifo_write_loop:
+ lbu $9, 0($20) // read data
+ sb $9, 0x20($27) // load FIFO
+ sub $19, $19, 1 // decrement counter
+ bnez $19, _ep0_fifo_write_loop
+ addi $20, $20, 1 // increment data pointer
+
+ sub $9, $18, 64 // max packetsize
+ beqz $9, _ep0_tx_state4
+ nop
+
+_ep0_tx_state3:
+ // transferred bytes < max packetsize
+ li $9, 0x0a // set INPKTRDY and DATAEND
+ sb $9, 0x12($27) // CSR0
+ li $22, 0 // set EP0 to IDLE state
+ b check_intr_ep1in
+ nop
+
+_ep0_tx_state4:
+ // transferred bytes == max packetsize
+ li $9, 0x02 // set INPKTRDY
+ sb $9, 0x12($27) // CSR0
+ b check_intr_ep1in
+ nop
+
+ //--------------------------------------------------------------
+ // 3. Check and handle EP1 BULK-IN interrupt
+ //--------------------------------------------------------------
+check_intr_ep1in:
+ andi $9, $10, 0x2 // check EP1 IN interrupt
+ beqz $9, check_intr_ep1out
+ nop
+
+handle_epin1_intr:
+ li $9, 1
+ sb $9, 0x0e($27) // set INDEX 1
+ lbu $9, 0x12($27) // read INCSR
+
+ andi $8, $9, 0x2 // check INCSR_FFNOTEMPT
+ bnez $8, _epin1_tx_state4
+ nop
+
+_epin1_write_fifo:
+ lhu $9, 0x10($27) // get INMAXP
+ sub $8, $21, $9
+ blez $8, _epin1_tx_state1 // bytes left <= INMAXP
+ ori $19, $21, 0
+ ori $19, $9, 0
+
+_epin1_tx_state1:
+ beqz $19, _epin1_tx_state4 // No data
+ nop
+
+ sub $21, $21, $19 // decrement data count
+
+ srl $5, $19, 2 // # of word
+ andi $6, $19, 0x3 // # of byte
+ beqz $5, _epin1_tx_state2
+ nop
+
+_epin1_fifo_write_word:
+ lw $9, 0($20) // read data from source address
+ sw $9, 0x24($27) // write FIFO
+ sub $5, $5, 1 // decrement counter
+ bnez $5, _epin1_fifo_write_word
+ addiu $20, $20, 4 // increment dest address
+
+_epin1_tx_state2:
+ beqz $6, _epin1_tx_state3
+ nop
+
+_epin1_fifo_write_byte:
+ lbu $9, 0($20) // read data from source address
+ sb $9, 0x24($27) // write FIFO
+ sub $6, $6, 1 // decrement counter
+ bnez $6, _epin1_fifo_write_byte
+ addiu $20, $20, 1 // increment dest address
+
+_epin1_tx_state3:
+ li $9, 0x1
+ sb $9, 0x12($27) // INCSR, set INPKTRDY
+
+_epin1_tx_state4:
+ // nop
+
+ //--------------------------------------------------------------
+ // 4. Check and handle EP1 BULK-OUT interrupt
+ //--------------------------------------------------------------
+check_intr_ep1out:
+ lhu $9, 0x04($27) // read INTROUT
+ andi $9, 0x2
+ beqz $9, check_status_next
+ nop
+
+handle_epout1_intr:
+ li $9, 1
+ sb $9, 0x0e($27) // set INDEX 1
+
+ lbu $9, 0x16($27) // read OUTCSR
+ andi $9, 0x1 // check OUTPKTRDY
+ beqz $9, check_status_next
+ nop
+
+_epout1_read_fifo:
+ lhu $19, 0x18($27) // read OUTCOUNT
+ srl $5, $19, 2 // # of word
+ andi $6, $19, 0x3 // # of byte
+ beqz $5, _epout1_rx_state1
+ nop
+
+_epout1_fifo_read_word:
+ lw $9, 0x24($27) // read FIFO
+ sw $9, 0($20) // store to dest address
+ sub $5, $5, 1 // decrement counter
+ bnez $5, _epout1_fifo_read_word
+ addiu $20, $20, 4 // increment dest address
+
+_epout1_rx_state1:
+ beqz $6, _epout1_rx_state2
+ nop
+
+_epout1_fifo_read_byte:
+ lbu $9, 0x24($27) // read FIFO
+ sb $9, 0($20) // store to dest address
+ sub $6, $6, 1 // decrement counter
+ bnez $6, _epout1_fifo_read_byte
+ addiu $20, $20, 1 // increment dest address
+
+_epout1_rx_state2:
+ sb $0, 0x16($27) // clear OUTPKTRDY
+
+check_status_next:
+ b usb_command_loop
+ nop
+
+//--------------------------------------------------------------
+// Device/Configuration/Interface/Endpoint/String Descriptors
+//--------------------------------------------------------------
+
+ .align 2
+device_desc:
+ .byte 0x12 // bLength
+ .byte 0x01 // bDescriptorType
+ .byte 0x00 // bcdUSB
+ .byte 0x02 // bcdUSB
+ .byte 0x00 // bDeviceClass
+ .byte 0x00 // bDeviceSubClass
+ .byte 0x00 // bDeviceProtocol
+ .byte 0x40 // bMaxPacketSize0
+ .byte 0x1a // idVendor
+ .byte 0x60 // idVendor
+ .byte 0x40 // idProduct
+ .byte 0x47 // idProduct
+ .byte 0x00 // bcdDevice
+ .byte 0x01 // bcdDevice
+ .byte 0x01 // iManufacturer
+ .byte 0x02 // iProduct
+ .byte 0x00 // iSerialNumber
+ .byte 0x01 // bNumConfigurations
+
+ .align 2
+dev_qualifier:
+ .byte 0x0a // bLength
+ .byte 0x06 // bDescriptorType
+ .byte 0x00 // bcdUSB
+ .byte 0x02 // bcdUSB
+ .byte 0x00 // bDeviceClass
+ .byte 0x00 // bDeviceSubClass
+ .byte 0x00 // bDeviceProtocol
+ .byte 0x40 // bMaxPacketSize0
+ .byte 0x01 // bNumConfigurations
+ .byte 0x00 // bRESERVED
+
+ .align 2
+config_desc_hs:
+ .byte 0x09 // bLength
+ .byte 0x02 // bDescriptorType
+ .byte 0x20 // wTotalLength
+ .byte 0x00 // wTotalLength
+ .byte 0x01 // bNumInterfaces
+ .byte 0x01 // bConfigurationValue
+ .byte 0x00 // iConfiguration
+ .byte 0xc0 // bmAttributes
+ .byte 0x01 // MaxPower
+intf_desc_hs:
+ .byte 0x09 // bLength
+ .byte 0x04 // bDescriptorType
+ .byte 0x00 // bInterfaceNumber
+ .byte 0x00 // bAlternateSetting
+ .byte 0x02 // bNumEndpoints
+ .byte 0xff // bInterfaceClass
+ .byte 0x00 // bInterfaceSubClass
+ .byte 0x50 // bInterfaceProtocol
+ .byte 0x00 // iInterface
+ep1_desc_hs:
+ .byte 0x07 // bLength
+ .byte 0x05 // bDescriptorType
+ .byte 0x01 // bEndpointAddress
+ .byte 0x02 // bmAttributes
+ .byte 0x00 // wMaxPacketSize
+ .byte 0x02 // wMaxPacketSize
+ .byte 0x00 // bInterval
+ep2_desc_hs:
+ .byte 0x07 // bLength
+ .byte 0x05 // bDescriptorType
+ .byte 0x81 // bEndpointAddress
+ .byte 0x02 // bmAttributes
+ .byte 0x00 // wMaxPacketSize
+ .byte 0x02 // wMaxPacketSize
+ .byte 0x00 // bInterval
+
+ .align 2
+config_desc_fs:
+ .byte 0x09 // bLength
+ .byte 0x02 // bDescriptorType
+ .byte 0x20 // wTotalLength
+ .byte 0x00 // wTotalLength
+ .byte 0x01 // bNumInterfaces
+ .byte 0x01 // bConfigurationValue
+ .byte 0x00 // iConfiguration
+ .byte 0xc0 // bmAttributes
+ .byte 0x01 // MaxPower
+intf_desc_fs:
+ .byte 0x09 // bLength
+ .byte 0x04 // bDescriptorType
+ .byte 0x00 // bInterfaceNumber
+ .byte 0x00 // bAlternateSetting
+ .byte 0x02 // bNumEndpoints
+ .byte 0xff // bInterfaceClass
+ .byte 0x00 // bInterfaceSubClass
+ .byte 0x50 // bInterfaceProtocol
+ .byte 0x00 // iInterface
+ep1_desc_fs:
+ .byte 0x07 // bLength
+ .byte 0x05 // bDescriptorType
+ .byte 0x01 // bEndpointAddress
+ .byte 0x02 // bmAttributes
+ .byte 0x40 // wMaxPacketSize
+ .byte 0x00 // wMaxPacketSize
+ .byte 0x00 // bInterval
+ep2_desc_fs:
+ .byte 0x07 // bLength
+ .byte 0x05 // bDescriptorType
+ .byte 0x81 // bEndpointAddress
+ .byte 0x02 // bmAttributes
+ .byte 0x40 // wMaxPacketSize
+ .byte 0x00 // wMaxPacketSize
+ .byte 0x00 // bInterval
+
+ .align 2
+string_lang_ids:
+ .byte 0x04
+ .byte 0x03
+ .byte 0x09
+ .byte 0x04
+
+ .align 2
+string_manufacture:
+ .byte 0x10
+ .byte 0x03
+ .byte 0x49
+ .byte 0x00
+ .byte 0x6e
+ .byte 0x00
+ .byte 0x67
+ .byte 0x00
+ .byte 0x65
+ .byte 0x00
+ .byte 0x6e
+ .byte 0x00
+ .byte 0x69
+ .byte 0x00
+ .byte 0x63
+ .byte 0x00
+
+ .align 2
+string_product:
+ .byte 0x2e
+ .byte 0x03
+ .byte 0x4a
+ .byte 0x00
+ .byte 0x5a
+ .byte 0x00
+ .byte 0x34
+ .byte 0x00
+ .byte 0x37
+ .byte 0x00
+ .byte 0x34
+ .byte 0x00
+ .byte 0x30
+ .byte 0x00
+ .byte 0x20
+ .byte 0x00
+ .byte 0x55
+ .byte 0x00
+ .byte 0x53
+ .byte 0x00
+ .byte 0x42
+ .byte 0x00
+ .byte 0x20
+ .byte 0x00
+ .byte 0x42
+ .byte 0x00
+ .byte 0x6f
+ .byte 0x00
+ .byte 0x6f
+ .byte 0x00
+ .byte 0x74
+ .byte 0x00
+ .byte 0x20
+ .byte 0x00
+ .byte 0x44
+ .byte 0x00
+ .byte 0x65
+ .byte 0x00
+ .byte 0x76
+ .byte 0x00
+ .byte 0x69
+ .byte 0x00
+ .byte 0x63
+ .byte 0x00
+ .byte 0x65
+ .byte 0x00
+
+ .align 2
+cpu_info_data:
+ .byte 0x4a
+ .byte 0x5a
+ .byte 0x34
+ .byte 0x37
+ .byte 0x34
+ .byte 0x30
+ .byte 0x56
+ .byte 0x31
+usbboot_end:
+
+ .set reorder
--- /dev/null
+/*
+ * Include file for Ingenic Semiconductor's JZ4740 CPU.
+ */
+#ifndef __JZ4740_H__
+#define __JZ4740_H__
+
+#ifndef __ASSEMBLY__
+#define UCOS_CSP 0
+
+#if UCOS_CSP
+#define __KERNEL__
+#include <bsp.h>
+#include <types.h>
+
+#include <sysdefs.h>
+#include <cacheops.h>
+#define KSEG0 KSEG0BASE
+#else
+#include <asm/addrspace.h>
+#include <asm/cacheops.h>
+#endif
+
+#define cache_unroll(base,op) \
+ __asm__ __volatile__(" \
+ .set noreorder; \
+ .set mips3; \
+ cache %1, (%0); \
+ .set mips0; \
+ .set reorder" \
+ : \
+ : "r" (base), \
+ "i" (op));
+
+static inline void jz_flush_dcache(void)
+{
+ unsigned long start;
+ unsigned long end;
+
+ start = KSEG0;
+ end = start + CONFIG_SYS_DCACHE_SIZE;
+ while (start < end) {
+ cache_unroll(start,Index_Writeback_Inv_D);
+ start += CONFIG_SYS_CACHELINE_SIZE;
+ }
+}
+
+static inline void jz_flush_icache(void)
+{
+ unsigned long start;
+ unsigned long end;
+
+ start = KSEG0;
+ end = start + CONFIG_SYS_ICACHE_SIZE;
+ while(start < end) {
+ cache_unroll(start,Index_Invalidate_I);
+ start += CONFIG_SYS_CACHELINE_SIZE;
+ }
+}
+
+/* cpu pipeline flush */
+static inline void jz_sync(void)
+{
+ __asm__ volatile ("sync");
+}
+
+static inline void jz_writeb(u32 address, u8 value)
+{
+ *((volatile u8 *)address) = value;
+}
+
+static inline void jz_writew(u32 address, u16 value)
+{
+ *((volatile u16 *)address) = value;
+}
+
+static inline void jz_writel(u32 address, u32 value)
+{
+ *((volatile u32 *)address) = value;
+}
+
+static inline u8 jz_readb(u32 address)
+{
+ return *((volatile u8 *)address);
+}
+
+static inline u16 jz_readw(u32 address)
+{
+ return *((volatile u16 *)address);
+}
+
+static inline u32 jz_readl(u32 address)
+{
+ return *((volatile u32 *)address);
+}
+
+#define REG8(addr) *((volatile u8 *)(addr))
+#define REG16(addr) *((volatile u16 *)(addr))
+#define REG32(addr) *((volatile u32 *)(addr))
+
+#else
+
+#define REG8(addr) (addr)
+#define REG16(addr) (addr)
+#define REG32(addr) (addr)
+
+#endif /* !ASSEMBLY */
+
+/* Boot ROM Specification */
+/* NOR Boot config */
+#define JZ4740_NORBOOT_8BIT 0x00000000 /* 8-bit data bus flash */
+#define JZ4740_NORBOOT_16BIT 0x10101010 /* 16-bit data bus flash */
+#define JZ4740_NORBOOT_32BIT 0x20202020 /* 32-bit data bus flash */
+
+/* NAND Boot config */
+#define JZ4740_NANDBOOT_B8R3 0xffffffff /* 8-bit bus & 3 row cycles */
+#define JZ4740_NANDBOOT_B8R2 0xf0f0f0f0 /* 8-bit bus & 2 row cycles */
+#define JZ4740_NANDBOOT_B16R3 0x0f0f0f0f /* 16-bit bus & 3 row cycles */
+#define JZ4740_NANDBOOT_B16R2 0x00000000 /* 16-bit bus & 2 row cycles */
+
+
+/* Register Definitions */
+#define CPM_BASE 0xB0000000
+#define INTC_BASE 0xB0001000
+#define TCU_BASE 0xB0002000
+#define WDT_BASE 0xB0002000
+#define RTC_BASE 0xB0003000
+#define GPIO_BASE 0xB0010000
+#define AIC_BASE 0xB0020000
+#define ICDC_BASE 0xB0020000
+#define MSC_BASE 0xB0021000
+#define UART0_BASE 0xB0030000
+#define I2C_BASE 0xB0042000
+#define SSI_BASE 0xB0043000
+#define SADC_BASE 0xB0070000
+#define EMC_BASE 0xB3010000
+#define DMAC_BASE 0xB3020000
+#define UHC_BASE 0xB3030000
+#define UDC_BASE 0xB3040000
+#define LCD_BASE 0xB3050000
+#define SLCD_BASE 0xB3050000
+#define CIM_BASE 0xB3060000
+#define ETH_BASE 0xB3100000
+
+
+/*
+ * INTC (Interrupt Controller)
+ */
+#define INTC_ISR (INTC_BASE + 0x00)
+#define INTC_IMR (INTC_BASE + 0x04)
+#define INTC_IMSR (INTC_BASE + 0x08)
+#define INTC_IMCR (INTC_BASE + 0x0c)
+#define INTC_IPR (INTC_BASE + 0x10)
+
+#define REG_INTC_ISR REG32(INTC_ISR)
+#define REG_INTC_IMR REG32(INTC_IMR)
+#define REG_INTC_IMSR REG32(INTC_IMSR)
+#define REG_INTC_IMCR REG32(INTC_IMCR)
+#define REG_INTC_IPR REG32(INTC_IPR)
+
+/* 1st-level interrupts */
+#define IRQ_I2C 1
+#define IRQ_UHC 3
+#define IRQ_UART0 9
+#define IRQ_SADC 12
+#define IRQ_MSC 14
+#define IRQ_RTC 15
+#define IRQ_SSI 16
+#define IRQ_CIM 17
+#define IRQ_AIC 18
+#define IRQ_ETH 19
+#define IRQ_DMAC 20
+#define IRQ_TCU2 21
+#define IRQ_TCU1 22
+#define IRQ_TCU0 23
+#define IRQ_UDC 24
+#define IRQ_GPIO3 25
+#define IRQ_GPIO2 26
+#define IRQ_GPIO1 27
+#define IRQ_GPIO0 28
+#define IRQ_IPU 29
+#define IRQ_LCD 30
+
+/* 2nd-level interrupts */
+#define IRQ_DMA_0 32 /* 32 to 37 for DMAC channel 0 to 5 */
+#define IRQ_GPIO_0 48 /* 48 to 175 for GPIO pin 0 to 127 */
+
+
+/*
+ * RTC
+ */
+#define RTC_RCR (RTC_BASE + 0x00) /* RTC Control Register */
+#define RTC_RSR (RTC_BASE + 0x04) /* RTC Second Register */
+#define RTC_RSAR (RTC_BASE + 0x08) /* RTC Second Alarm Register */
+#define RTC_RGR (RTC_BASE + 0x0c) /* RTC Regulator Register */
+
+#define RTC_HCR (RTC_BASE + 0x20) /* Hibernate Control Register */
+#define RTC_HWFCR (RTC_BASE + 0x24) /* Hibernate Wakeup Filter Counter Reg */
+#define RTC_HRCR (RTC_BASE + 0x28) /* Hibernate Reset Counter Register */
+#define RTC_HWCR (RTC_BASE + 0x2c) /* Hibernate Wakeup Control Register */
+#define RTC_HWRSR (RTC_BASE + 0x30) /* Hibernate Wakeup Status Register */
+#define RTC_HSPR (RTC_BASE + 0x34) /* Hibernate Scratch Pattern Register */
+
+#define REG_RTC_RCR REG32(RTC_RCR)
+#define REG_RTC_RSR REG32(RTC_RSR)
+#define REG_RTC_RSAR REG32(RTC_RSAR)
+#define REG_RTC_RGR REG32(RTC_RGR)
+#define REG_RTC_HCR REG32(RTC_HCR)
+#define REG_RTC_HWFCR REG32(RTC_HWFCR)
+#define REG_RTC_HRCR REG32(RTC_HRCR)
+#define REG_RTC_HWCR REG32(RTC_HWCR)
+#define REG_RTC_HWRSR REG32(RTC_HWRSR)
+#define REG_RTC_HSPR REG32(RTC_HSPR)
+
+/* RTC Control Register */
+#define RTC_RCR_WRDY (1 << 7) /* Write Ready Flag */
+#define RTC_RCR_HZ (1 << 6) /* 1Hz Flag */
+#define RTC_RCR_HZIE (1 << 5) /* 1Hz Interrupt Enable */
+#define RTC_RCR_AF (1 << 4) /* Alarm Flag */
+#define RTC_RCR_AIE (1 << 3) /* Alarm Interrupt Enable */
+#define RTC_RCR_AE (1 << 2) /* Alarm Enable */
+#define RTC_RCR_RTCE (1 << 0) /* RTC Enable */
+
+/* RTC Regulator Register */
+#define RTC_RGR_LOCK (1 << 31) /* Lock Bit */
+#define RTC_RGR_ADJC_BIT 16
+#define RTC_RGR_ADJC_MASK (0x3ff << RTC_RGR_ADJC_BIT)
+#define RTC_RGR_NC1HZ_BIT 0
+#define RTC_RGR_NC1HZ_MASK (0xffff << RTC_RGR_NC1HZ_BIT)
+
+/* Hibernate Control Register */
+#define RTC_HCR_PD (1 << 0) /* Power Down */
+
+/* Hibernate Wakeup Filter Counter Register */
+#define RTC_HWFCR_BIT 5
+#define RTC_HWFCR_MASK (0x7ff << RTC_HWFCR_BIT)
+
+/* Hibernate Reset Counter Register */
+#define RTC_HRCR_BIT 5
+#define RTC_HRCR_MASK (0x7f << RTC_HRCR_BIT)
+
+/* Hibernate Wakeup Control Register */
+#define RTC_HWCR_EALM (1 << 0) /* RTC alarm wakeup enable */
+
+/* Hibernate Wakeup Status Register */
+#define RTC_HWRSR_HR (1 << 5) /* Hibernate reset */
+#define RTC_HWRSR_PPR (1 << 4) /* PPR reset */
+#define RTC_HWRSR_PIN (1 << 1) /* Wakeup pin status bit */
+#define RTC_HWRSR_ALM (1 << 0) /* RTC alarm status bit */
+
+
+/*************************************************************************
+ * CPM (Clock reset and Power control Management)
+ *************************************************************************/
+#define CPM_CPCCR (CPM_BASE+0x00)
+#define CPM_CPPCR (CPM_BASE+0x10)
+#define CPM_I2SCDR (CPM_BASE+0x60)
+#define CPM_LPCDR (CPM_BASE+0x64)
+#define CPM_MSCCDR (CPM_BASE+0x68)
+#define CPM_UHCCDR (CPM_BASE+0x6C)
+
+#define CPM_LCR (CPM_BASE+0x04)
+#define CPM_CLKGR (CPM_BASE+0x20)
+#define CPM_SCR (CPM_BASE+0x24)
+
+#define CPM_HCR (CPM_BASE+0x30)
+#define CPM_HWFCR (CPM_BASE+0x34)
+#define CPM_HRCR (CPM_BASE+0x38)
+#define CPM_HWCR (CPM_BASE+0x3c)
+#define CPM_HWSR (CPM_BASE+0x40)
+#define CPM_HSPR (CPM_BASE+0x44)
+
+#define CPM_RSR (CPM_BASE+0x08)
+
+
+#define REG_CPM_CPCCR REG32(CPM_CPCCR)
+#define REG_CPM_CPPCR REG32(CPM_CPPCR)
+#define REG_CPM_I2SCDR REG32(CPM_I2SCDR)
+#define REG_CPM_LPCDR REG32(CPM_LPCDR)
+#define REG_CPM_MSCCDR REG32(CPM_MSCCDR)
+#define REG_CPM_UHCCDR REG32(CPM_UHCCDR)
+
+#define REG_CPM_LCR REG32(CPM_LCR)
+#define REG_CPM_CLKGR REG32(CPM_CLKGR)
+#define REG_CPM_SCR REG32(CPM_SCR)
+#define REG_CPM_HCR REG32(CPM_HCR)
+#define REG_CPM_HWFCR REG32(CPM_HWFCR)
+#define REG_CPM_HRCR REG32(CPM_HRCR)
+#define REG_CPM_HWCR REG32(CPM_HWCR)
+#define REG_CPM_HWSR REG32(CPM_HWSR)
+#define REG_CPM_HSPR REG32(CPM_HSPR)
+
+#define REG_CPM_RSR REG32(CPM_RSR)
+
+
+/* Clock Control Register */
+#define CPM_CPCCR_I2CS (1 << 31)
+#define CPM_CPCCR_CLKOEN (1 << 30)
+#define CPM_CPCCR_UCS (1 << 29)
+#define CPM_CPCCR_UDIV_BIT 23
+#define CPM_CPCCR_UDIV_MASK (0x3f << CPM_CPCCR_UDIV_BIT)
+#define CPM_CPCCR_CE (1 << 22)
+#define CPM_CPCCR_PCS (1 << 21)
+#define CPM_CPCCR_LDIV_BIT 16
+#define CPM_CPCCR_LDIV_MASK (0x1f << CPM_CPCCR_LDIV_BIT)
+#define CPM_CPCCR_MDIV_BIT 12
+#define CPM_CPCCR_MDIV_MASK (0x0f << CPM_CPCCR_MDIV_BIT)
+#define CPM_CPCCR_PDIV_BIT 8
+#define CPM_CPCCR_PDIV_MASK (0x0f << CPM_CPCCR_PDIV_BIT)
+#define CPM_CPCCR_HDIV_BIT 4
+#define CPM_CPCCR_HDIV_MASK (0x0f << CPM_CPCCR_HDIV_BIT)
+#define CPM_CPCCR_CDIV_BIT 0
+#define CPM_CPCCR_CDIV_MASK (0x0f << CPM_CPCCR_CDIV_BIT)
+
+/* I2S Clock Divider Register */
+#define CPM_I2SCDR_I2SDIV_BIT 0
+#define CPM_I2SCDR_I2SDIV_MASK (0x1ff << CPM_I2SCDR_I2SDIV_BIT)
+
+/* LCD Pixel Clock Divider Register */
+#define CPM_LPCDR_PIXDIV_BIT 0
+#define CPM_LPCDR_PIXDIV_MASK (0x1ff << CPM_LPCDR_PIXDIV_BIT)
+
+/* MSC Clock Divider Register */
+#define CPM_MSCCDR_MSCDIV_BIT 0
+#define CPM_MSCCDR_MSCDIV_MASK (0x1f << CPM_MSCCDR_MSCDIV_BIT)
+
+/* PLL Control Register */
+#define CPM_CPPCR_PLLM_BIT 23
+#define CPM_CPPCR_PLLM_MASK (0x1ff << CPM_CPPCR_PLLM_BIT)
+#define CPM_CPPCR_PLLN_BIT 18
+#define CPM_CPPCR_PLLN_MASK (0x1f << CPM_CPPCR_PLLN_BIT)
+#define CPM_CPPCR_PLLOD_BIT 16
+#define CPM_CPPCR_PLLOD_MASK (0x03 << CPM_CPPCR_PLLOD_BIT)
+#define CPM_CPPCR_PLLS (1 << 10)
+#define CPM_CPPCR_PLLBP (1 << 9)
+#define CPM_CPPCR_PLLEN (1 << 8)
+#define CPM_CPPCR_PLLST_BIT 0
+#define CPM_CPPCR_PLLST_MASK (0xff << CPM_CPPCR_PLLST_BIT)
+
+/* Low Power Control Register */
+#define CPM_LCR_DOZE_DUTY_BIT 3
+#define CPM_LCR_DOZE_DUTY_MASK (0x1f << CPM_LCR_DOZE_DUTY_BIT)
+#define CPM_LCR_DOZE_ON (1 << 2)
+#define CPM_LCR_LPM_BIT 0
+#define CPM_LCR_LPM_MASK (0x3 << CPM_LCR_LPM_BIT)
+ #define CPM_LCR_LPM_IDLE (0x0 << CPM_LCR_LPM_BIT)
+ #define CPM_LCR_LPM_SLEEP (0x1 << CPM_LCR_LPM_BIT)
+
+/* Clock Gate Register */
+#define CPM_CLKGR_UART1 (1 << 15)
+#define CPM_CLKGR_UHC (1 << 14)
+#define CPM_CLKGR_IPU (1 << 13)
+#define CPM_CLKGR_DMAC (1 << 12)
+#define CPM_CLKGR_UDC (1 << 11)
+#define CPM_CLKGR_LCD (1 << 10)
+#define CPM_CLKGR_CIM (1 << 9)
+#define CPM_CLKGR_SADC (1 << 8)
+#define CPM_CLKGR_MSC (1 << 7)
+#define CPM_CLKGR_AIC1 (1 << 6)
+#define CPM_CLKGR_AIC2 (1 << 5)
+#define CPM_CLKGR_SSI (1 << 4)
+#define CPM_CLKGR_I2C (1 << 3)
+#define CPM_CLKGR_RTC (1 << 2)
+#define CPM_CLKGR_TCU (1 << 1)
+#define CPM_CLKGR_UART0 (1 << 0)
+
+/* Sleep Control Register */
+#define CPM_SCR_O1ST_BIT 8
+#define CPM_SCR_O1ST_MASK (0xff << CPM_SCR_O1ST_BIT)
+#define CPM_SCR_UDCPHY_ENABLE (1 << 6)
+#define CPM_SCR_USBPHY_DISABLE (1 << 7)
+#define CPM_SCR_OSC_ENABLE (1 << 4)
+
+/* Hibernate Control Register */
+#define CPM_HCR_PD (1 << 0)
+
+/* Wakeup Filter Counter Register in Hibernate Mode */
+#define CPM_HWFCR_TIME_BIT 0
+#define CPM_HWFCR_TIME_MASK (0x3ff << CPM_HWFCR_TIME_BIT)
+
+/* Reset Counter Register in Hibernate Mode */
+#define CPM_HRCR_TIME_BIT 0
+#define CPM_HRCR_TIME_MASK (0x7f << CPM_HRCR_TIME_BIT)
+
+/* Wakeup Control Register in Hibernate Mode */
+#define CPM_HWCR_WLE_LOW (0 << 2)
+#define CPM_HWCR_WLE_HIGH (1 << 2)
+#define CPM_HWCR_PIN_WAKEUP (1 << 1)
+#define CPM_HWCR_RTC_WAKEUP (1 << 0)
+
+/* Wakeup Status Register in Hibernate Mode */
+#define CPM_HWSR_WSR_PIN (1 << 1)
+#define CPM_HWSR_WSR_RTC (1 << 0)
+
+/* Reset Status Register */
+#define CPM_RSR_HR (1 << 2)
+#define CPM_RSR_WR (1 << 1)
+#define CPM_RSR_PR (1 << 0)
+
+
+/*************************************************************************
+ * TCU (Timer Counter Unit)
+ *************************************************************************/
+#define TCU_TSR (TCU_BASE + 0x1C) /* Timer Stop Register */
+#define TCU_TSSR (TCU_BASE + 0x2C) /* Timer Stop Set Register */
+#define TCU_TSCR (TCU_BASE + 0x3C) /* Timer Stop Clear Register */
+#define TCU_TER (TCU_BASE + 0x10) /* Timer Counter Enable Register */
+#define TCU_TESR (TCU_BASE + 0x14) /* Timer Counter Enable Set Register */
+#define TCU_TECR (TCU_BASE + 0x18) /* Timer Counter Enable Clear Register */
+#define TCU_TFR (TCU_BASE + 0x20) /* Timer Flag Register */
+#define TCU_TFSR (TCU_BASE + 0x24) /* Timer Flag Set Register */
+#define TCU_TFCR (TCU_BASE + 0x28) /* Timer Flag Clear Register */
+#define TCU_TMR (TCU_BASE + 0x30) /* Timer Mask Register */
+#define TCU_TMSR (TCU_BASE + 0x34) /* Timer Mask Set Register */
+#define TCU_TMCR (TCU_BASE + 0x38) /* Timer Mask Clear Register */
+#define TCU_TDFR0 (TCU_BASE + 0x40) /* Timer Data Full Register */
+#define TCU_TDHR0 (TCU_BASE + 0x44) /* Timer Data Half Register */
+#define TCU_TCNT0 (TCU_BASE + 0x48) /* Timer Counter Register */
+#define TCU_TCSR0 (TCU_BASE + 0x4C) /* Timer Control Register */
+#define TCU_TDFR1 (TCU_BASE + 0x50)
+#define TCU_TDHR1 (TCU_BASE + 0x54)
+#define TCU_TCNT1 (TCU_BASE + 0x58)
+#define TCU_TCSR1 (TCU_BASE + 0x5C)
+#define TCU_TDFR2 (TCU_BASE + 0x60)
+#define TCU_TDHR2 (TCU_BASE + 0x64)
+#define TCU_TCNT2 (TCU_BASE + 0x68)
+#define TCU_TCSR2 (TCU_BASE + 0x6C)
+#define TCU_TDFR3 (TCU_BASE + 0x70)
+#define TCU_TDHR3 (TCU_BASE + 0x74)
+#define TCU_TCNT3 (TCU_BASE + 0x78)
+#define TCU_TCSR3 (TCU_BASE + 0x7C)
+#define TCU_TDFR4 (TCU_BASE + 0x80)
+#define TCU_TDHR4 (TCU_BASE + 0x84)
+#define TCU_TCNT4 (TCU_BASE + 0x88)
+#define TCU_TCSR4 (TCU_BASE + 0x8C)
+#define TCU_TDFR5 (TCU_BASE + 0x90)
+#define TCU_TDHR5 (TCU_BASE + 0x94)
+#define TCU_TCNT5 (TCU_BASE + 0x98)
+#define TCU_TCSR5 (TCU_BASE + 0x9C)
+
+#define REG_TCU_TSR REG32(TCU_TSR)
+#define REG_TCU_TSSR REG32(TCU_TSSR)
+#define REG_TCU_TSCR REG32(TCU_TSCR)
+#define REG_TCU_TER REG8(TCU_TER)
+#define REG_TCU_TESR REG8(TCU_TESR)
+#define REG_TCU_TECR REG8(TCU_TECR)
+#define REG_TCU_TFR REG32(TCU_TFR)
+#define REG_TCU_TFSR REG32(TCU_TFSR)
+#define REG_TCU_TFCR REG32(TCU_TFCR)
+#define REG_TCU_TMR REG32(TCU_TMR)
+#define REG_TCU_TMSR REG32(TCU_TMSR)
+#define REG_TCU_TMCR REG32(TCU_TMCR)
+#define REG_TCU_TDFR0 REG16(TCU_TDFR0)
+#define REG_TCU_TDHR0 REG16(TCU_TDHR0)
+#define REG_TCU_TCNT0 REG16(TCU_TCNT0)
+#define REG_TCU_TCSR0 REG16(TCU_TCSR0)
+#define REG_TCU_TDFR1 REG16(TCU_TDFR1)
+#define REG_TCU_TDHR1 REG16(TCU_TDHR1)
+#define REG_TCU_TCNT1 REG16(TCU_TCNT1)
+#define REG_TCU_TCSR1 REG16(TCU_TCSR1)
+#define REG_TCU_TDFR2 REG16(TCU_TDFR2)
+#define REG_TCU_TDHR2 REG16(TCU_TDHR2)
+#define REG_TCU_TCNT2 REG16(TCU_TCNT2)
+#define REG_TCU_TCSR2 REG16(TCU_TCSR2)
+#define REG_TCU_TDFR3 REG16(TCU_TDFR3)
+#define REG_TCU_TDHR3 REG16(TCU_TDHR3)
+#define REG_TCU_TCNT3 REG16(TCU_TCNT3)
+#define REG_TCU_TCSR3 REG16(TCU_TCSR3)
+#define REG_TCU_TDFR4 REG16(TCU_TDFR4)
+#define REG_TCU_TDHR4 REG16(TCU_TDHR4)
+#define REG_TCU_TCNT4 REG16(TCU_TCNT4)
+#define REG_TCU_TCSR4 REG16(TCU_TCSR4)
+
+/* n = 0,1,2,3,4,5 */
+#define TCU_TDFR(n) (TCU_BASE + (0x40 + (n)*0x10)) /* Timer Data Full Reg */
+#define TCU_TDHR(n) (TCU_BASE + (0x44 + (n)*0x10)) /* Timer Data Half Reg */
+#define TCU_TCNT(n) (TCU_BASE + (0x48 + (n)*0x10)) /* Timer Counter Reg */
+#define TCU_TCSR(n) (TCU_BASE + (0x4C + (n)*0x10)) /* Timer Control Reg */
+
+#define REG_TCU_TDFR(n) REG16(TCU_TDFR((n)))
+#define REG_TCU_TDHR(n) REG16(TCU_TDHR((n)))
+#define REG_TCU_TCNT(n) REG16(TCU_TCNT((n)))
+#define REG_TCU_TCSR(n) REG16(TCU_TCSR((n)))
+
+/* Register definitions */
+#define TCU_TCSR_PWM_SD (1 << 9)
+#define TCU_TCSR_PWM_INITL_HIGH (1 << 8)
+#define TCU_TCSR_PWM_EN (1 << 7)
+#define TCU_TCSR_PRESCALE_BIT 3
+#define TCU_TCSR_PRESCALE_MASK (0x7 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE1 (0x0 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE4 (0x1 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE16 (0x2 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE64 (0x3 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE256 (0x4 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_PRESCALE1024 (0x5 << TCU_TCSR_PRESCALE_BIT)
+#define TCU_TCSR_EXT_EN (1 << 2)
+#define TCU_TCSR_RTC_EN (1 << 1)
+#define TCU_TCSR_PCK_EN (1 << 0)
+
+#define TCU_TER_TCEN5 (1 << 5)
+#define TCU_TER_TCEN4 (1 << 4)
+#define TCU_TER_TCEN3 (1 << 3)
+#define TCU_TER_TCEN2 (1 << 2)
+#define TCU_TER_TCEN1 (1 << 1)
+#define TCU_TER_TCEN0 (1 << 0)
+
+#define TCU_TESR_TCST5 (1 << 5)
+#define TCU_TESR_TCST4 (1 << 4)
+#define TCU_TESR_TCST3 (1 << 3)
+#define TCU_TESR_TCST2 (1 << 2)
+#define TCU_TESR_TCST1 (1 << 1)
+#define TCU_TESR_TCST0 (1 << 0)
+
+#define TCU_TECR_TCCL5 (1 << 5)
+#define TCU_TECR_TCCL4 (1 << 4)
+#define TCU_TECR_TCCL3 (1 << 3)
+#define TCU_TECR_TCCL2 (1 << 2)
+#define TCU_TECR_TCCL1 (1 << 1)
+#define TCU_TECR_TCCL0 (1 << 0)
+
+#define TCU_TFR_HFLAG5 (1 << 21)
+#define TCU_TFR_HFLAG4 (1 << 20)
+#define TCU_TFR_HFLAG3 (1 << 19)
+#define TCU_TFR_HFLAG2 (1 << 18)
+#define TCU_TFR_HFLAG1 (1 << 17)
+#define TCU_TFR_HFLAG0 (1 << 16)
+#define TCU_TFR_FFLAG5 (1 << 5)
+#define TCU_TFR_FFLAG4 (1 << 4)
+#define TCU_TFR_FFLAG3 (1 << 3)
+#define TCU_TFR_FFLAG2 (1 << 2)
+#define TCU_TFR_FFLAG1 (1 << 1)
+#define TCU_TFR_FFLAG0 (1 << 0)
+
+#define TCU_TFSR_HFLAG5 (1 << 21)
+#define TCU_TFSR_HFLAG4 (1 << 20)
+#define TCU_TFSR_HFLAG3 (1 << 19)
+#define TCU_TFSR_HFLAG2 (1 << 18)
+#define TCU_TFSR_HFLAG1 (1 << 17)
+#define TCU_TFSR_HFLAG0 (1 << 16)
+#define TCU_TFSR_FFLAG5 (1 << 5)
+#define TCU_TFSR_FFLAG4 (1 << 4)
+#define TCU_TFSR_FFLAG3 (1 << 3)
+#define TCU_TFSR_FFLAG2 (1 << 2)
+#define TCU_TFSR_FFLAG1 (1 << 1)
+#define TCU_TFSR_FFLAG0 (1 << 0)
+
+#define TCU_TFCR_HFLAG5 (1 << 21)
+#define TCU_TFCR_HFLAG4 (1 << 20)
+#define TCU_TFCR_HFLAG3 (1 << 19)
+#define TCU_TFCR_HFLAG2 (1 << 18)
+#define TCU_TFCR_HFLAG1 (1 << 17)
+#define TCU_TFCR_HFLAG0 (1 << 16)
+#define TCU_TFCR_FFLAG5 (1 << 5)
+#define TCU_TFCR_FFLAG4 (1 << 4)
+#define TCU_TFCR_FFLAG3 (1 << 3)
+#define TCU_TFCR_FFLAG2 (1 << 2)
+#define TCU_TFCR_FFLAG1 (1 << 1)
+#define TCU_TFCR_FFLAG0 (1 << 0)
+
+#define TCU_TMR_HMASK5 (1 << 21)
+#define TCU_TMR_HMASK4 (1 << 20)
+#define TCU_TMR_HMASK3 (1 << 19)
+#define TCU_TMR_HMASK2 (1 << 18)
+#define TCU_TMR_HMASK1 (1 << 17)
+#define TCU_TMR_HMASK0 (1 << 16)
+#define TCU_TMR_FMASK5 (1 << 5)
+#define TCU_TMR_FMASK4 (1 << 4)
+#define TCU_TMR_FMASK3 (1 << 3)
+#define TCU_TMR_FMASK2 (1 << 2)
+#define TCU_TMR_FMASK1 (1 << 1)
+#define TCU_TMR_FMASK0 (1 << 0)
+
+#define TCU_TMSR_HMST5 (1 << 21)
+#define TCU_TMSR_HMST4 (1 << 20)
+#define TCU_TMSR_HMST3 (1 << 19)
+#define TCU_TMSR_HMST2 (1 << 18)
+#define TCU_TMSR_HMST1 (1 << 17)
+#define TCU_TMSR_HMST0 (1 << 16)
+#define TCU_TMSR_FMST5 (1 << 5)
+#define TCU_TMSR_FMST4 (1 << 4)
+#define TCU_TMSR_FMST3 (1 << 3)
+#define TCU_TMSR_FMST2 (1 << 2)
+#define TCU_TMSR_FMST1 (1 << 1)
+#define TCU_TMSR_FMST0 (1 << 0)
+
+#define TCU_TMCR_HMCL5 (1 << 21)
+#define TCU_TMCR_HMCL4 (1 << 20)
+#define TCU_TMCR_HMCL3 (1 << 19)
+#define TCU_TMCR_HMCL2 (1 << 18)
+#define TCU_TMCR_HMCL1 (1 << 17)
+#define TCU_TMCR_HMCL0 (1 << 16)
+#define TCU_TMCR_FMCL5 (1 << 5)
+#define TCU_TMCR_FMCL4 (1 << 4)
+#define TCU_TMCR_FMCL3 (1 << 3)
+#define TCU_TMCR_FMCL2 (1 << 2)
+#define TCU_TMCR_FMCL1 (1 << 1)
+#define TCU_TMCR_FMCL0 (1 << 0)
+
+#define TCU_TSR_WDTS (1 << 16)
+#define TCU_TSR_STOP5 (1 << 5)
+#define TCU_TSR_STOP4 (1 << 4)
+#define TCU_TSR_STOP3 (1 << 3)
+#define TCU_TSR_STOP2 (1 << 2)
+#define TCU_TSR_STOP1 (1 << 1)
+#define TCU_TSR_STOP0 (1 << 0)
+
+#define TCU_TSSR_WDTSS (1 << 16)
+#define TCU_TSSR_STPS5 (1 << 5)
+#define TCU_TSSR_STPS4 (1 << 4)
+#define TCU_TSSR_STPS3 (1 << 3)
+#define TCU_TSSR_STPS2 (1 << 2)
+#define TCU_TSSR_STPS1 (1 << 1)
+#define TCU_TSSR_STPS0 (1 << 0)
+
+#define TCU_TSSR_WDTSC (1 << 16)
+#define TCU_TSSR_STPC5 (1 << 5)
+#define TCU_TSSR_STPC4 (1 << 4)
+#define TCU_TSSR_STPC3 (1 << 3)
+#define TCU_TSSR_STPC2 (1 << 2)
+#define TCU_TSSR_STPC1 (1 << 1)
+#define TCU_TSSR_STPC0 (1 << 0)
+
+
+/*
+ * WDT (WatchDog Timer)
+ */
+#define WDT_TDR (WDT_BASE + 0x00)
+#define WDT_TCER (WDT_BASE + 0x04)
+#define WDT_TCNT (WDT_BASE + 0x08)
+#define WDT_TCSR (WDT_BASE + 0x0C)
+
+#define REG_WDT_TDR REG16(WDT_TDR)
+#define REG_WDT_TCER REG8(WDT_TCER)
+#define REG_WDT_TCNT REG16(WDT_TCNT)
+#define REG_WDT_TCSR REG16(WDT_TCSR)
+
+/* Register definition */
+#define WDT_TCSR_PRESCALE_BIT 3
+#define WDT_TCSR_PRESCALE_MASK (0x7 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE1 (0x0 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE4 (0x1 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE16 (0x2 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE64 (0x3 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE256 (0x4 << WDT_TCSR_PRESCALE_BIT)
+ #define WDT_TCSR_PRESCALE1024 (0x5 << WDT_TCSR_PRESCALE_BIT)
+#define WDT_TCSR_EXT_EN (1 << 2)
+#define WDT_TCSR_RTC_EN (1 << 1)
+#define WDT_TCSR_PCK_EN (1 << 0)
+
+#define WDT_TCER_TCEN (1 << 0)
+
+
+/*
+ * DMAC (DMA Controller)
+ */
+
+#define MAX_DMA_NUM 6 /* max 6 channels */
+
+#define DMAC_DSAR(n) (DMAC_BASE + (0x00 + (n) * 0x20)) /* DMA source address */
+#define DMAC_DTAR(n) (DMAC_BASE + (0x04 + (n) * 0x20)) /* DMA target address */
+#define DMAC_DTCR(n) (DMAC_BASE + (0x08 + (n) * 0x20)) /* DMA transfer count */
+#define DMAC_DRSR(n) (DMAC_BASE + (0x0c + (n) * 0x20)) /* DMA request source */
+#define DMAC_DCCSR(n) (DMAC_BASE + (0x10 + (n) * 0x20)) /* DMA control/status */
+#define DMAC_DCMD(n) (DMAC_BASE + (0x14 + (n) * 0x20)) /* DMA command */
+#define DMAC_DDA(n) (DMAC_BASE + (0x18 + (n) * 0x20)) /* DMA descriptor address */
+#define DMAC_DMACR (DMAC_BASE + 0x0300) /* DMA control register */
+#define DMAC_DMAIPR (DMAC_BASE + 0x0304) /* DMA interrupt pending */
+#define DMAC_DMADBR (DMAC_BASE + 0x0308) /* DMA doorbell */
+#define DMAC_DMADBSR (DMAC_BASE + 0x030C) /* DMA doorbell set */
+
+/* channel 0 */
+#define DMAC_DSAR0 DMAC_DSAR(0)
+#define DMAC_DTAR0 DMAC_DTAR(0)
+#define DMAC_DTCR0 DMAC_DTCR(0)
+#define DMAC_DRSR0 DMAC_DRSR(0)
+#define DMAC_DCCSR0 DMAC_DCCSR(0)
+#define DMAC_DCMD0 DMAC_DCMD(0)
+#define DMAC_DDA0 DMAC_DDA(0)
+
+/* channel 1 */
+#define DMAC_DSAR1 DMAC_DSAR(1)
+#define DMAC_DTAR1 DMAC_DTAR(1)
+#define DMAC_DTCR1 DMAC_DTCR(1)
+#define DMAC_DRSR1 DMAC_DRSR(1)
+#define DMAC_DCCSR1 DMAC_DCCSR(1)
+#define DMAC_DCMD1 DMAC_DCMD(1)
+#define DMAC_DDA1 DMAC_DDA(1)
+
+/* channel 2 */
+#define DMAC_DSAR2 DMAC_DSAR(2)
+#define DMAC_DTAR2 DMAC_DTAR(2)
+#define DMAC_DTCR2 DMAC_DTCR(2)
+#define DMAC_DRSR2 DMAC_DRSR(2)
+#define DMAC_DCCSR2 DMAC_DCCSR(2)
+#define DMAC_DCMD2 DMAC_DCMD(2)
+#define DMAC_DDA2 DMAC_DDA(2)
+
+/* channel 3 */
+#define DMAC_DSAR3 DMAC_DSAR(3)
+#define DMAC_DTAR3 DMAC_DTAR(3)
+#define DMAC_DTCR3 DMAC_DTCR(3)
+#define DMAC_DRSR3 DMAC_DRSR(3)
+#define DMAC_DCCSR3 DMAC_DCCSR(3)
+#define DMAC_DCMD3 DMAC_DCMD(3)
+#define DMAC_DDA3 DMAC_DDA(3)
+
+/* channel 4 */
+#define DMAC_DSAR4 DMAC_DSAR(4)
+#define DMAC_DTAR4 DMAC_DTAR(4)
+#define DMAC_DTCR4 DMAC_DTCR(4)
+#define DMAC_DRSR4 DMAC_DRSR(4)
+#define DMAC_DCCSR4 DMAC_DCCSR(4)
+#define DMAC_DCMD4 DMAC_DCMD(4)
+#define DMAC_DDA4 DMAC_DDA(4)
+
+/* channel 5 */
+#define DMAC_DSAR5 DMAC_DSAR(5)
+#define DMAC_DTAR5 DMAC_DTAR(5)
+#define DMAC_DTCR5 DMAC_DTCR(5)
+#define DMAC_DRSR5 DMAC_DRSR(5)
+#define DMAC_DCCSR5 DMAC_DCCSR(5)
+#define DMAC_DCMD5 DMAC_DCMD(5)
+#define DMAC_DDA5 DMAC_DDA(5)
+
+#define REG_DMAC_DSAR(n) REG32(DMAC_DSAR((n)))
+#define REG_DMAC_DTAR(n) REG32(DMAC_DTAR((n)))
+#define REG_DMAC_DTCR(n) REG32(DMAC_DTCR((n)))
+#define REG_DMAC_DRSR(n) REG32(DMAC_DRSR((n)))
+#define REG_DMAC_DCCSR(n) REG32(DMAC_DCCSR((n)))
+#define REG_DMAC_DCMD(n) REG32(DMAC_DCMD((n)))
+#define REG_DMAC_DDA(n) REG32(DMAC_DDA((n)))
+#define REG_DMAC_DMACR REG32(DMAC_DMACR)
+#define REG_DMAC_DMAIPR REG32(DMAC_DMAIPR)
+#define REG_DMAC_DMADBR REG32(DMAC_DMADBR)
+#define REG_DMAC_DMADBSR REG32(DMAC_DMADBSR)
+
+/* DMA request source register */
+#define DMAC_DRSR_RS_BIT 0
+#define DMAC_DRSR_RS_MASK (0x1f << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_AUTO (8 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_UART0OUT (20 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_UART0IN (21 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_SSIOUT (22 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_SSIIN (23 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_AICOUT (24 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_AICIN (25 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_MSCOUT (26 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_MSCIN (27 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_TCU (28 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_SADC (29 << DMAC_DRSR_RS_BIT)
+#define DMAC_DRSR_RS_SLCD (30 << DMAC_DRSR_RS_BIT)
+
+/* DMA channel control/status register */
+#define DMAC_DCCSR_NDES (1 << 31) /* descriptor (0) or not (1) ? */
+#define DMAC_DCCSR_CDOA_BIT 16 /* copy of DMA offset address */
+#define DMAC_DCCSR_CDOA_MASK (0xff << DMAC_DCCSR_CDOA_BIT)
+#define DMAC_DCCSR_INV (1 << 6) /* descriptor invalid */
+#define DMAC_DCCSR_AR (1 << 4) /* address error */
+#define DMAC_DCCSR_TT (1 << 3) /* transfer terminated */
+#define DMAC_DCCSR_HLT (1 << 2) /* DMA halted */
+#define DMAC_DCCSR_CT (1 << 1) /* count terminated */
+#define DMAC_DCCSR_EN (1 << 0) /* channel enable bit */
+
+/* DMA channel command register */
+#define DMAC_DCMD_SAI (1 << 23) /* source address increment */
+#define DMAC_DCMD_DAI (1 << 22) /* dest address increment */
+#define DMAC_DCMD_RDIL_BIT 16 /* request detection interval length */
+#define DMAC_DCMD_RDIL_MASK (0x0f << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_IGN (0 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_2 (1 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_4 (2 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_8 (3 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_12 (4 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_16 (5 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_20 (6 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_24 (7 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_28 (8 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_32 (9 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_48 (10 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_60 (11 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_64 (12 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_124 (13 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_128 (14 << DMAC_DCMD_RDIL_BIT)
+ #define DMAC_DCMD_RDIL_200 (15 << DMAC_DCMD_RDIL_BIT)
+#define DMAC_DCMD_SWDH_BIT 14 /* source port width */
+#define DMAC_DCMD_SWDH_MASK (0x03 << DMAC_DCMD_SWDH_BIT)
+ #define DMAC_DCMD_SWDH_32 (0 << DMAC_DCMD_SWDH_BIT)
+ #define DMAC_DCMD_SWDH_8 (1 << DMAC_DCMD_SWDH_BIT)
+ #define DMAC_DCMD_SWDH_16 (2 << DMAC_DCMD_SWDH_BIT)
+#define DMAC_DCMD_DWDH_BIT 12 /* dest port width */
+#define DMAC_DCMD_DWDH_MASK (0x03 << DMAC_DCMD_DWDH_BIT)
+ #define DMAC_DCMD_DWDH_32 (0 << DMAC_DCMD_DWDH_BIT)
+ #define DMAC_DCMD_DWDH_8 (1 << DMAC_DCMD_DWDH_BIT)
+ #define DMAC_DCMD_DWDH_16 (2 << DMAC_DCMD_DWDH_BIT)
+#define DMAC_DCMD_DS_BIT 8 /* transfer data size of a data unit */
+#define DMAC_DCMD_DS_MASK (0x07 << DMAC_DCMD_DS_BIT)
+ #define DMAC_DCMD_DS_32BIT (0 << DMAC_DCMD_DS_BIT)
+ #define DMAC_DCMD_DS_8BIT (1 << DMAC_DCMD_DS_BIT)
+ #define DMAC_DCMD_DS_16BIT (2 << DMAC_DCMD_DS_BIT)
+ #define DMAC_DCMD_DS_16BYTE (3 << DMAC_DCMD_DS_BIT)
+ #define DMAC_DCMD_DS_32BYTE (4 << DMAC_DCMD_DS_BIT)
+#define DMAC_DCMD_TM (1 << 7) /* transfer mode: 0-single 1-block */
+#define DMAC_DCMD_DES_V (1 << 4) /* descriptor valid flag */
+#define DMAC_DCMD_DES_VM (1 << 3) /* descriptor valid mask: 1:support V-bit */
+#define DMAC_DCMD_DES_VIE (1 << 2) /* DMA valid error interrupt enable */
+#define DMAC_DCMD_TIE (1 << 1) /* DMA transfer interrupt enable */
+#define DMAC_DCMD_LINK (1 << 0) /* descriptor link enable */
+
+/* DMA descriptor address register */
+#define DMAC_DDA_BASE_BIT 12 /* descriptor base address */
+#define DMAC_DDA_BASE_MASK (0x0fffff << DMAC_DDA_BASE_BIT)
+#define DMAC_DDA_OFFSET_BIT 4 /* descriptor offset address */
+#define DMAC_DDA_OFFSET_MASK (0x0ff << DMAC_DDA_OFFSET_BIT)
+
+/* DMA control register */
+#define DMAC_DMACR_PR_BIT 8 /* channel priority mode */
+#define DMAC_DMACR_PR_MASK (0x03 << DMAC_DMACR_PR_BIT)
+ #define DMAC_DMACR_PR_012345 (0 << DMAC_DMACR_PR_BIT)
+ #define DMAC_DMACR_PR_023145 (1 << DMAC_DMACR_PR_BIT)
+ #define DMAC_DMACR_PR_201345 (2 << DMAC_DMACR_PR_BIT)
+ #define DMAC_DMACR_PR_RR (3 << DMAC_DMACR_PR_BIT) /* round robin */
+#define DMAC_DMACR_HLT (1 << 3) /* DMA halt flag */
+#define DMAC_DMACR_AR (1 << 2) /* address error flag */
+#define DMAC_DMACR_DMAE (1 << 0) /* DMA enable bit */
+
+/* DMA doorbell register */
+#define DMAC_DMADBR_DB5 (1 << 5) /* doorbell for channel 5 */
+#define DMAC_DMADBR_DB4 (1 << 5) /* doorbell for channel 4 */
+#define DMAC_DMADBR_DB3 (1 << 5) /* doorbell for channel 3 */
+#define DMAC_DMADBR_DB2 (1 << 5) /* doorbell for channel 2 */
+#define DMAC_DMADBR_DB1 (1 << 5) /* doorbell for channel 1 */
+#define DMAC_DMADBR_DB0 (1 << 5) /* doorbell for channel 0 */
+
+/* DMA doorbell set register */
+#define DMAC_DMADBSR_DBS5 (1 << 5) /* enable doorbell for channel 5 */
+#define DMAC_DMADBSR_DBS4 (1 << 5) /* enable doorbell for channel 4 */
+#define DMAC_DMADBSR_DBS3 (1 << 5) /* enable doorbell for channel 3 */
+#define DMAC_DMADBSR_DBS2 (1 << 5) /* enable doorbell for channel 2 */
+#define DMAC_DMADBSR_DBS1 (1 << 5) /* enable doorbell for channel 1 */
+#define DMAC_DMADBSR_DBS0 (1 << 5) /* enable doorbell for channel 0 */
+
+/* DMA interrupt pending register */
+#define DMAC_DMAIPR_CIRQ5 (1 << 5) /* irq pending status for channel 5 */
+#define DMAC_DMAIPR_CIRQ4 (1 << 4) /* irq pending status for channel 4 */
+#define DMAC_DMAIPR_CIRQ3 (1 << 3) /* irq pending status for channel 3 */
+#define DMAC_DMAIPR_CIRQ2 (1 << 2) /* irq pending status for channel 2 */
+#define DMAC_DMAIPR_CIRQ1 (1 << 1) /* irq pending status for channel 1 */
+#define DMAC_DMAIPR_CIRQ0 (1 << 0) /* irq pending status for channel 0 */
+
+
+/*************************************************************************
+ * GPIO (General-Purpose I/O Ports)
+ *************************************************************************/
+#define MAX_GPIO_NUM 128
+
+/* = 0,1,2,3 */
+#define GPIO_PXPIN(n) (GPIO_BASE + (0x00 + (n)*0x100)) /* PIN Level Register */
+#define GPIO_PXDAT(n) (GPIO_BASE + (0x10 + (n)*0x100)) /* Port Data Register */
+#define GPIO_PXDATS(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Data Set Register */
+#define GPIO_PXDATC(n) (GPIO_BASE + (0x18 + (n)*0x100)) /* Port Data Clear Register */
+#define GPIO_PXIM(n) (GPIO_BASE + (0x20 + (n)*0x100)) /* Interrupt Mask Register */
+#define GPIO_PXIMS(n) (GPIO_BASE + (0x24 + (n)*0x100)) /* Interrupt Mask Set Reg */
+#define GPIO_PXIMC(n) (GPIO_BASE + (0x28 + (n)*0x100)) /* Interrupt Mask Clear Reg */
+#define GPIO_PXPE(n) (GPIO_BASE + (0x30 + (n)*0x100)) /* Pull Enable Register */
+#define GPIO_PXPES(n) (GPIO_BASE + (0x34 + (n)*0x100)) /* Pull Enable Set Reg. */
+#define GPIO_PXPEC(n) (GPIO_BASE + (0x38 + (n)*0x100)) /* Pull Enable Clear Reg. */
+#define GPIO_PXFUN(n) (GPIO_BASE + (0x40 + (n)*0x100)) /* Function Register */
+#define GPIO_PXFUNS(n) (GPIO_BASE + (0x44 + (n)*0x100)) /* Function Set Register */
+#define GPIO_PXFUNC(n) (GPIO_BASE + (0x48 + (n)*0x100)) /* Function Clear Register */
+#define GPIO_PXSEL(n) (GPIO_BASE + (0x50 + (n)*0x100)) /* Select Register */
+#define GPIO_PXSELS(n) (GPIO_BASE + (0x54 + (n)*0x100)) /* Select Set Register */
+#define GPIO_PXSELC(n) (GPIO_BASE + (0x58 + (n)*0x100)) /* Select Clear Register */
+#define GPIO_PXDIR(n) (GPIO_BASE + (0x60 + (n)*0x100)) /* Direction Register */
+#define GPIO_PXDIRS(n) (GPIO_BASE + (0x64 + (n)*0x100)) /* Direction Set Register */
+#define GPIO_PXDIRC(n) (GPIO_BASE + (0x68 + (n)*0x100)) /* Direction Clear Register */
+#define GPIO_PXTRG(n) (GPIO_BASE + (0x70 + (n)*0x100)) /* Trigger Register */
+#define GPIO_PXTRGS(n) (GPIO_BASE + (0x74 + (n)*0x100)) /* Trigger Set Register */
+#define GPIO_PXTRGC(n) (GPIO_BASE + (0x78 + (n)*0x100)) /* Trigger Set Register */
+#define GPIO_PXFLG(n) (GPIO_BASE + (0x80 + (n)*0x100)) /* Port Flag Register */
+#define GPIO_PXFLGC(n) (GPIO_BASE + (0x14 + (n)*0x100)) /* Port Flag clear Register */
+
+#define REG_GPIO_PXPIN(n) REG32(GPIO_PXPIN((n))) /* PIN level */
+#define REG_GPIO_PXDAT(n) REG32(GPIO_PXDAT((n))) /* 1: interrupt pending */
+#define REG_GPIO_PXDATS(n) REG32(GPIO_PXDATS((n)))
+#define REG_GPIO_PXDATC(n) REG32(GPIO_PXDATC((n)))
+#define REG_GPIO_PXIM(n) REG32(GPIO_PXIM((n))) /* 1: mask pin interrupt */
+#define REG_GPIO_PXIMS(n) REG32(GPIO_PXIMS((n)))
+#define REG_GPIO_PXIMC(n) REG32(GPIO_PXIMC((n)))
+#define REG_GPIO_PXPE(n) REG32(GPIO_PXPE((n))) /* 1: disable pull up/down */
+#define REG_GPIO_PXPES(n) REG32(GPIO_PXPES((n)))
+#define REG_GPIO_PXPEC(n) REG32(GPIO_PXPEC((n)))
+#define REG_GPIO_PXFUN(n) REG32(GPIO_PXFUN((n))) /* 0:GPIO or intr, 1:FUNC */
+#define REG_GPIO_PXFUNS(n) REG32(GPIO_PXFUNS((n)))
+#define REG_GPIO_PXFUNC(n) REG32(GPIO_PXFUNC((n)))
+#define REG_GPIO_PXSEL(n) REG32(GPIO_PXSEL((n))) /* 0:GPIO/Fun0,1:intr/fun1*/
+#define REG_GPIO_PXSELS(n) REG32(GPIO_PXSELS((n)))
+#define REG_GPIO_PXSELC(n) REG32(GPIO_PXSELC((n)))
+#define REG_GPIO_PXDIR(n) REG32(GPIO_PXDIR((n))) /* 0:input/low-level-trig/falling-edge-trig, 1:output/high-level-trig/rising-edge-trig */
+#define REG_GPIO_PXDIRS(n) REG32(GPIO_PXDIRS((n)))
+#define REG_GPIO_PXDIRC(n) REG32(GPIO_PXDIRC((n)))
+#define REG_GPIO_PXTRG(n) REG32(GPIO_PXTRG((n))) /* 0:level-trigger, 1:edge-trigger */
+#define REG_GPIO_PXTRGS(n) REG32(GPIO_PXTRGS((n)))
+#define REG_GPIO_PXTRGC(n) REG32(GPIO_PXTRGC((n)))
+#define REG_GPIO_PXFLG(n) REG32(GPIO_PXFLG((n))) /* interrupt flag */
+#define REG_GPIO_PXFLGC(n) REG32(GPIO_PXFLGC((n))) /* interrupt flag */
+
+
+/*************************************************************************
+ * UART
+ *************************************************************************/
+
+#define IRDA_BASE UART0_BASE
+#define UART_BASE UART0_BASE
+#define UART_OFF 0x1000
+
+/* Register Offset */
+#define OFF_RDR (0x00) /* R 8b H'xx */
+#define OFF_TDR (0x00) /* W 8b H'xx */
+#define OFF_DLLR (0x00) /* RW 8b H'00 */
+#define OFF_DLHR (0x04) /* RW 8b H'00 */
+#define OFF_IER (0x04) /* RW 8b H'00 */
+#define OFF_ISR (0x08) /* R 8b H'01 */
+#define OFF_FCR (0x08) /* W 8b H'00 */
+#define OFF_LCR (0x0C) /* RW 8b H'00 */
+#define OFF_MCR (0x10) /* RW 8b H'00 */
+#define OFF_LSR (0x14) /* R 8b H'00 */
+#define OFF_MSR (0x18) /* R 8b H'00 */
+#define OFF_SPR (0x1C) /* RW 8b H'00 */
+#define OFF_SIRCR (0x20) /* RW 8b H'00, UART0 */
+#define OFF_UMR (0x24) /* RW 8b H'00, UART M Register */
+#define OFF_UACR (0x28) /* RW 8b H'00, UART Add Cycle Register */
+
+/* Register Address */
+#define UART0_RDR (UART0_BASE + OFF_RDR)
+#define UART0_TDR (UART0_BASE + OFF_TDR)
+#define UART0_DLLR (UART0_BASE + OFF_DLLR)
+#define UART0_DLHR (UART0_BASE + OFF_DLHR)
+#define UART0_IER (UART0_BASE + OFF_IER)
+#define UART0_ISR (UART0_BASE + OFF_ISR)
+#define UART0_FCR (UART0_BASE + OFF_FCR)
+#define UART0_LCR (UART0_BASE + OFF_LCR)
+#define UART0_MCR (UART0_BASE + OFF_MCR)
+#define UART0_LSR (UART0_BASE + OFF_LSR)
+#define UART0_MSR (UART0_BASE + OFF_MSR)
+#define UART0_SPR (UART0_BASE + OFF_SPR)
+#define UART0_SIRCR (UART0_BASE + OFF_SIRCR)
+#define UART0_UMR (UART0_BASE + OFF_UMR)
+#define UART0_UACR (UART0_BASE + OFF_UACR)
+
+/*
+ * Define macros for UART_IER
+ * UART Interrupt Enable Register
+ */
+#define UART_IER_RIE (1 << 0) /* 0: receive fifo "full" interrupt disable */
+#define UART_IER_TIE (1 << 1) /* 0: transmit fifo "empty" interrupt disable */
+#define UART_IER_RLIE (1 << 2) /* 0: receive line status interrupt disable */
+#define UART_IER_MIE (1 << 3) /* 0: modem status interrupt disable */
+#define UART_IER_RTIE (1 << 4) /* 0: receive timeout interrupt disable */
+
+/*
+ * Define macros for UART_ISR
+ * UART Interrupt Status Register
+ */
+#define UART_ISR_IP (1 << 0) /* 0: interrupt is pending 1: no interrupt */
+#define UART_ISR_IID (7 << 1) /* Source of Interrupt */
+#define UART_ISR_IID_MSI (0 << 1) /* Modem status interrupt */
+#define UART_ISR_IID_THRI (1 << 1) /* Transmitter holding register empty */
+#define UART_ISR_IID_RDI (2 << 1) /* Receiver data interrupt */
+#define UART_ISR_IID_RLSI (3 << 1) /* Receiver line status interrupt */
+#define UART_ISR_FFMS (3 << 6) /* FIFO mode select, set when UART_FCR.FE is set to 1 */
+#define UART_ISR_FFMS_NO_FIFO (0 << 6)
+#define UART_ISR_FFMS_FIFO_MODE (3 << 6)
+
+/*
+ * Define macros for UART_FCR
+ * UART FIFO Control Register
+ */
+#define UART_FCR_FE (1 << 0) /* 0: non-FIFO mode 1: FIFO mode */
+#define UART_FCR_RFLS (1 << 1) /* write 1 to flush receive FIFO */
+#define UART_FCR_TFLS (1 << 2) /* write 1 to flush transmit FIFO */
+#define UART_FCR_DMS (1 << 3) /* 0: disable DMA mode */
+#define UART_FCR_UUE (1 << 4) /* 0: disable UART */
+#define UART_FCR_RTRG (3 << 6) /* Receive FIFO Data Trigger */
+#define UART_FCR_RTRG_1 (0 << 6)
+#define UART_FCR_RTRG_4 (1 << 6)
+#define UART_FCR_RTRG_8 (2 << 6)
+#define UART_FCR_RTRG_15 (3 << 6)
+
+/*
+ * Define macros for UART_LCR
+ * UART Line Control Register
+ */
+#define UART_LCR_WLEN (3 << 0) /* word length */
+#define UART_LCR_WLEN_5 (0 << 0)
+#define UART_LCR_WLEN_6 (1 << 0)
+#define UART_LCR_WLEN_7 (2 << 0)
+#define UART_LCR_WLEN_8 (3 << 0)
+#define UART_LCR_STOP (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
+ 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
+#define UART_LCR_STOP_1 (0 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
+ 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
+#define UART_LCR_STOP_2 (1 << 2) /* 0: 1 stop bit when word length is 5,6,7,8
+ 1: 1.5 stop bits when 5; 2 stop bits when 6,7,8 */
+
+#define UART_LCR_PE (1 << 3) /* 0: parity disable */
+#define UART_LCR_PROE (1 << 4) /* 0: even parity 1: odd parity */
+#define UART_LCR_SPAR (1 << 5) /* 0: sticky parity disable */
+#define UART_LCR_SBRK (1 << 6) /* write 0 normal, write 1 send break */
+#define UART_LCR_DLAB (1 << 7) /* 0: access UART_RDR/TDR/IER 1: access UART_DLLR/DLHR */
+
+/*
+ * Define macros for UART_LSR
+ * UART Line Status Register
+ */
+#define UART_LSR_DR (1 << 0) /* 0: receive FIFO is empty 1: receive data is ready */
+#define UART_LSR_ORER (1 << 1) /* 0: no overrun error */
+#define UART_LSR_PER (1 << 2) /* 0: no parity error */
+#define UART_LSR_FER (1 << 3) /* 0; no framing error */
+#define UART_LSR_BRK (1 << 4) /* 0: no break detected 1: receive a break signal */
+#define UART_LSR_TDRQ (1 << 5) /* 1: transmit FIFO half "empty" */
+#define UART_LSR_TEMT (1 << 6) /* 1: transmit FIFO and shift registers empty */
+#define UART_LSR_RFER (1 << 7) /* 0: no receive error 1: receive error in FIFO mode */
+
+/*
+ * Define macros for UART_MCR
+ * UART Modem Control Register
+ */
+#define UART_MCR_DTR (1 << 0) /* 0: DTR_ ouput high */
+#define UART_MCR_RTS (1 << 1) /* 0: RTS_ output high */
+#define UART_MCR_OUT1 (1 << 2) /* 0: UART_MSR.RI is set to 0 and RI_ input high */
+#define UART_MCR_OUT2 (1 << 3) /* 0: UART_MSR.DCD is set to 0 and DCD_ input high */
+#define UART_MCR_LOOP (1 << 4) /* 0: normal 1: loopback mode */
+#define UART_MCR_MCE (1 << 7) /* 0: modem function is disable */
+
+/*
+ * Define macros for UART_MSR
+ * UART Modem Status Register
+ */
+#define UART_MSR_DCTS (1 << 0) /* 0: no change on CTS_ pin since last read of UART_MSR */
+#define UART_MSR_DDSR (1 << 1) /* 0: no change on DSR_ pin since last read of UART_MSR */
+#define UART_MSR_DRI (1 << 2) /* 0: no change on RI_ pin since last read of UART_MSR */
+#define UART_MSR_DDCD (1 << 3) /* 0: no change on DCD_ pin since last read of UART_MSR */
+#define UART_MSR_CTS (1 << 4) /* 0: CTS_ pin is high */
+#define UART_MSR_DSR (1 << 5) /* 0: DSR_ pin is high */
+#define UART_MSR_RI (1 << 6) /* 0: RI_ pin is high */
+#define UART_MSR_DCD (1 << 7) /* 0: DCD_ pin is high */
+
+/*
+ * Define macros for SIRCR
+ * Slow IrDA Control Register
+ */
+#define SIRCR_TSIRE (1 << 0) /* 0: transmitter is in UART mode 1: IrDA mode */
+#define SIRCR_RSIRE (1 << 1) /* 0: receiver is in UART mode 1: IrDA mode */
+#define SIRCR_TPWS (1 << 2) /* 0: transmit 0 pulse width is 3/16 of bit length
+ 1: 0 pulse width is 1.6us for 115.2Kbps */
+#define SIRCR_TXPL (1 << 3) /* 0: encoder generates a positive pulse for 0 */
+#define SIRCR_RXPL (1 << 4) /* 0: decoder interprets positive pulse as 0 */
+
+
+/*************************************************************************
+ * AIC (AC97/I2S Controller)
+ *************************************************************************/
+#define AIC_FR (AIC_BASE + 0x000)
+#define AIC_CR (AIC_BASE + 0x004)
+#define AIC_ACCR1 (AIC_BASE + 0x008)
+#define AIC_ACCR2 (AIC_BASE + 0x00C)
+#define AIC_I2SCR (AIC_BASE + 0x010)
+#define AIC_SR (AIC_BASE + 0x014)
+#define AIC_ACSR (AIC_BASE + 0x018)
+#define AIC_I2SSR (AIC_BASE + 0x01C)
+#define AIC_ACCAR (AIC_BASE + 0x020)
+#define AIC_ACCDR (AIC_BASE + 0x024)
+#define AIC_ACSAR (AIC_BASE + 0x028)
+#define AIC_ACSDR (AIC_BASE + 0x02C)
+#define AIC_I2SDIV (AIC_BASE + 0x030)
+#define AIC_DR (AIC_BASE + 0x034)
+
+#define REG_AIC_FR REG32(AIC_FR)
+#define REG_AIC_CR REG32(AIC_CR)
+#define REG_AIC_ACCR1 REG32(AIC_ACCR1)
+#define REG_AIC_ACCR2 REG32(AIC_ACCR2)
+#define REG_AIC_I2SCR REG32(AIC_I2SCR)
+#define REG_AIC_SR REG32(AIC_SR)
+#define REG_AIC_ACSR REG32(AIC_ACSR)
+#define REG_AIC_I2SSR REG32(AIC_I2SSR)
+#define REG_AIC_ACCAR REG32(AIC_ACCAR)
+#define REG_AIC_ACCDR REG32(AIC_ACCDR)
+#define REG_AIC_ACSAR REG32(AIC_ACSAR)
+#define REG_AIC_ACSDR REG32(AIC_ACSDR)
+#define REG_AIC_I2SDIV REG32(AIC_I2SDIV)
+#define REG_AIC_DR REG32(AIC_DR)
+
+/* AIC Controller Configuration Register (AIC_FR) */
+
+#define AIC_FR_RFTH_BIT 12 /* Receive FIFO Threshold */
+#define AIC_FR_RFTH_MASK (0xf << AIC_FR_RFTH_BIT)
+#define AIC_FR_TFTH_BIT 8 /* Transmit FIFO Threshold */
+#define AIC_FR_TFTH_MASK (0xf << AIC_FR_TFTH_BIT)
+#define AIC_FR_ICDC (1 << 5) /* External(0) or Internal CODEC(1) */
+#define AIC_FR_AUSEL (1 << 4) /* AC97(0) or I2S/MSB-justified(1) */
+#define AIC_FR_RST (1 << 3) /* AIC registers reset */
+#define AIC_FR_BCKD (1 << 2) /* I2S BIT_CLK direction, 0:input,1:output */
+#define AIC_FR_SYNCD (1 << 1) /* I2S SYNC direction, 0:input,1:output */
+#define AIC_FR_ENB (1 << 0) /* AIC enable bit */
+
+/* AIC Controller Common Control Register (AIC_CR) */
+
+#define AIC_CR_OSS_BIT 19 /* Output Sample Size from memory (AIC V2 only) */
+#define AIC_CR_OSS_MASK (0x7 << AIC_CR_OSS_BIT)
+ #define AIC_CR_OSS_8BIT (0x0 << AIC_CR_OSS_BIT)
+ #define AIC_CR_OSS_16BIT (0x1 << AIC_CR_OSS_BIT)
+ #define AIC_CR_OSS_18BIT (0x2 << AIC_CR_OSS_BIT)
+ #define AIC_CR_OSS_20BIT (0x3 << AIC_CR_OSS_BIT)
+ #define AIC_CR_OSS_24BIT (0x4 << AIC_CR_OSS_BIT)
+#define AIC_CR_ISS_BIT 16 /* Input Sample Size from memory (AIC V2 only) */
+#define AIC_CR_ISS_MASK (0x7 << AIC_CR_ISS_BIT)
+ #define AIC_CR_ISS_8BIT (0x0 << AIC_CR_ISS_BIT)
+ #define AIC_CR_ISS_16BIT (0x1 << AIC_CR_ISS_BIT)
+ #define AIC_CR_ISS_18BIT (0x2 << AIC_CR_ISS_BIT)
+ #define AIC_CR_ISS_20BIT (0x3 << AIC_CR_ISS_BIT)
+ #define AIC_CR_ISS_24BIT (0x4 << AIC_CR_ISS_BIT)
+#define AIC_CR_RDMS (1 << 15) /* Receive DMA enable */
+#define AIC_CR_TDMS (1 << 14) /* Transmit DMA enable */
+#define AIC_CR_M2S (1 << 11) /* Mono to Stereo enable */
+#define AIC_CR_ENDSW (1 << 10) /* Endian switch enable */
+#define AIC_CR_AVSTSU (1 << 9) /* Signed <-> Unsigned toggle enable */
+#define AIC_CR_FLUSH (1 << 8) /* Flush FIFO */
+#define AIC_CR_EROR (1 << 6) /* Enable ROR interrupt */
+#define AIC_CR_ETUR (1 << 5) /* Enable TUR interrupt */
+#define AIC_CR_ERFS (1 << 4) /* Enable RFS interrupt */
+#define AIC_CR_ETFS (1 << 3) /* Enable TFS interrupt */
+#define AIC_CR_ENLBF (1 << 2) /* Enable Loopback Function */
+#define AIC_CR_ERPL (1 << 1) /* Enable Playback Function */
+#define AIC_CR_EREC (1 << 0) /* Enable Record Function */
+
+/* AIC Controller AC-link Control Register 1 (AIC_ACCR1) */
+
+#define AIC_ACCR1_RS_BIT 16 /* Receive Valid Slots */
+#define AIC_ACCR1_RS_MASK (0x3ff << AIC_ACCR1_RS_BIT)
+ #define AIC_ACCR1_RS_SLOT12 (1 << 25) /* Slot 12 valid bit */
+ #define AIC_ACCR1_RS_SLOT11 (1 << 24) /* Slot 11 valid bit */
+ #define AIC_ACCR1_RS_SLOT10 (1 << 23) /* Slot 10 valid bit */
+ #define AIC_ACCR1_RS_SLOT9 (1 << 22) /* Slot 9 valid bit, LFE */
+ #define AIC_ACCR1_RS_SLOT8 (1 << 21) /* Slot 8 valid bit, Surround Right */
+ #define AIC_ACCR1_RS_SLOT7 (1 << 20) /* Slot 7 valid bit, Surround Left */
+ #define AIC_ACCR1_RS_SLOT6 (1 << 19) /* Slot 6 valid bit, PCM Center */
+ #define AIC_ACCR1_RS_SLOT5 (1 << 18) /* Slot 5 valid bit */
+ #define AIC_ACCR1_RS_SLOT4 (1 << 17) /* Slot 4 valid bit, PCM Right */
+ #define AIC_ACCR1_RS_SLOT3 (1 << 16) /* Slot 3 valid bit, PCM Left */
+#define AIC_ACCR1_XS_BIT 0 /* Transmit Valid Slots */
+#define AIC_ACCR1_XS_MASK (0x3ff << AIC_ACCR1_XS_BIT)
+ #define AIC_ACCR1_XS_SLOT12 (1 << 9) /* Slot 12 valid bit */
+ #define AIC_ACCR1_XS_SLOT11 (1 << 8) /* Slot 11 valid bit */
+ #define AIC_ACCR1_XS_SLOT10 (1 << 7) /* Slot 10 valid bit */
+ #define AIC_ACCR1_XS_SLOT9 (1 << 6) /* Slot 9 valid bit, LFE */
+ #define AIC_ACCR1_XS_SLOT8 (1 << 5) /* Slot 8 valid bit, Surround Right */
+ #define AIC_ACCR1_XS_SLOT7 (1 << 4) /* Slot 7 valid bit, Surround Left */
+ #define AIC_ACCR1_XS_SLOT6 (1 << 3) /* Slot 6 valid bit, PCM Center */
+ #define AIC_ACCR1_XS_SLOT5 (1 << 2) /* Slot 5 valid bit */
+ #define AIC_ACCR1_XS_SLOT4 (1 << 1) /* Slot 4 valid bit, PCM Right */
+ #define AIC_ACCR1_XS_SLOT3 (1 << 0) /* Slot 3 valid bit, PCM Left */
+
+/* AIC Controller AC-link Control Register 2 (AIC_ACCR2) */
+
+#define AIC_ACCR2_ERSTO (1 << 18) /* Enable RSTO interrupt */
+#define AIC_ACCR2_ESADR (1 << 17) /* Enable SADR interrupt */
+#define AIC_ACCR2_ECADT (1 << 16) /* Enable CADT interrupt */
+#define AIC_ACCR2_OASS_BIT 8 /* Output Sample Size for AC-link */
+#define AIC_ACCR2_OASS_MASK (0x3 << AIC_ACCR2_OASS_BIT)
+ #define AIC_ACCR2_OASS_20BIT (0 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 20-bit */
+ #define AIC_ACCR2_OASS_18BIT (1 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 18-bit */
+ #define AIC_ACCR2_OASS_16BIT (2 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 16-bit */
+ #define AIC_ACCR2_OASS_8BIT (3 << AIC_ACCR2_OASS_BIT) /* Output Audio Sample Size is 8-bit */
+#define AIC_ACCR2_IASS_BIT 6 /* Output Sample Size for AC-link */
+#define AIC_ACCR2_IASS_MASK (0x3 << AIC_ACCR2_IASS_BIT)
+ #define AIC_ACCR2_IASS_20BIT (0 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 20-bit */
+ #define AIC_ACCR2_IASS_18BIT (1 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 18-bit */
+ #define AIC_ACCR2_IASS_16BIT (2 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 16-bit */
+ #define AIC_ACCR2_IASS_8BIT (3 << AIC_ACCR2_IASS_BIT) /* Input Audio Sample Size is 8-bit */
+#define AIC_ACCR2_SO (1 << 3) /* SDATA_OUT output value */
+#define AIC_ACCR2_SR (1 << 2) /* RESET# pin level */
+#define AIC_ACCR2_SS (1 << 1) /* SYNC pin level */
+#define AIC_ACCR2_SA (1 << 0) /* SYNC and SDATA_OUT alternation */
+
+/* AIC Controller I2S/MSB-justified Control Register (AIC_I2SCR) */
+
+#define AIC_I2SCR_STPBK (1 << 12) /* Stop BIT_CLK for I2S/MSB-justified */
+#define AIC_I2SCR_WL_BIT 1 /* Input/Output Sample Size for I2S/MSB-justified */
+#define AIC_I2SCR_WL_MASK (0x7 << AIC_I2SCR_WL_BIT)
+ #define AIC_I2SCR_WL_24BIT (0 << AIC_I2SCR_WL_BIT) /* Word Length is 24 bit */
+ #define AIC_I2SCR_WL_20BIT (1 << AIC_I2SCR_WL_BIT) /* Word Length is 20 bit */
+ #define AIC_I2SCR_WL_18BIT (2 << AIC_I2SCR_WL_BIT) /* Word Length is 18 bit */
+ #define AIC_I2SCR_WL_16BIT (3 << AIC_I2SCR_WL_BIT) /* Word Length is 16 bit */
+ #define AIC_I2SCR_WL_8BIT (4 << AIC_I2SCR_WL_BIT) /* Word Length is 8 bit */
+#define AIC_I2SCR_AMSL (1 << 0) /* 0:I2S, 1:MSB-justified */
+
+/* AIC Controller FIFO Status Register (AIC_SR) */
+
+#define AIC_SR_RFL_BIT 24 /* Receive FIFO Level */
+#define AIC_SR_RFL_MASK (0x3f << AIC_SR_RFL_BIT)
+#define AIC_SR_TFL_BIT 8 /* Transmit FIFO level */
+#define AIC_SR_TFL_MASK (0x3f << AIC_SR_TFL_BIT)
+#define AIC_SR_ROR (1 << 6) /* Receive FIFO Overrun */
+#define AIC_SR_TUR (1 << 5) /* Transmit FIFO Underrun */
+#define AIC_SR_RFS (1 << 4) /* Receive FIFO Service Request */
+#define AIC_SR_TFS (1 << 3) /* Transmit FIFO Service Request */
+
+/* AIC Controller AC-link Status Register (AIC_ACSR) */
+
+#define AIC_ACSR_SLTERR (1 << 21) /* Slot Error Flag */
+#define AIC_ACSR_CRDY (1 << 20) /* External CODEC Ready Flag */
+#define AIC_ACSR_CLPM (1 << 19) /* External CODEC low power mode flag */
+#define AIC_ACSR_RSTO (1 << 18) /* External CODEC regs read status timeout */
+#define AIC_ACSR_SADR (1 << 17) /* External CODEC regs status addr and data received */
+#define AIC_ACSR_CADT (1 << 16) /* Command Address and Data Transmitted */
+
+/* AIC Controller I2S/MSB-justified Status Register (AIC_I2SSR) */
+
+#define AIC_I2SSR_BSY (1 << 2) /* AIC Busy in I2S/MSB-justified format */
+
+/* AIC Controller AC97 codec Command Address Register (AIC_ACCAR) */
+
+#define AIC_ACCAR_CAR_BIT 0
+#define AIC_ACCAR_CAR_MASK (0xfffff << AIC_ACCAR_CAR_BIT)
+
+/* AIC Controller AC97 codec Command Data Register (AIC_ACCDR) */
+
+#define AIC_ACCDR_CDR_BIT 0
+#define AIC_ACCDR_CDR_MASK (0xfffff << AIC_ACCDR_CDR_BIT)
+
+/* AIC Controller AC97 codec Status Address Register (AIC_ACSAR) */
+
+#define AIC_ACSAR_SAR_BIT 0
+#define AIC_ACSAR_SAR_MASK (0xfffff << AIC_ACSAR_SAR_BIT)
+
+/* AIC Controller AC97 codec Status Data Register (AIC_ACSDR) */
+
+#define AIC_ACSDR_SDR_BIT 0
+#define AIC_ACSDR_SDR_MASK (0xfffff << AIC_ACSDR_SDR_BIT)
+
+/* AIC Controller I2S/MSB-justified Clock Divider Register (AIC_I2SDIV) */
+
+#define AIC_I2SDIV_DIV_BIT 0
+#define AIC_I2SDIV_DIV_MASK (0x7f << AIC_I2SDIV_DIV_BIT)
+ #define AIC_I2SDIV_BITCLK_3072KHZ (0x0C << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 3.072MHz */
+ #define AIC_I2SDIV_BITCLK_2836KHZ (0x0D << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 2.836MHz */
+ #define AIC_I2SDIV_BITCLK_1418KHZ (0x1A << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.418MHz */
+ #define AIC_I2SDIV_BITCLK_1024KHZ (0x24 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 1.024MHz */
+ #define AIC_I2SDIV_BITCLK_7089KHZ (0x34 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 708.92KHz */
+ #define AIC_I2SDIV_BITCLK_512KHZ (0x48 << AIC_I2SDIV_DIV_BIT) /* BIT_CLK of 512.00KHz */
+
+
+/*************************************************************************
+ * ICDC (Internal CODEC)
+ *************************************************************************/
+#define ICDC_CR (ICDC_BASE + 0x0400) /* ICDC Control Register */
+#define ICDC_APWAIT (ICDC_BASE + 0x0404) /* Anti-Pop WAIT Stage Timing Control Register */
+#define ICDC_APPRE (ICDC_BASE + 0x0408) /* Anti-Pop HPEN-PRE Stage Timing Control Register */
+#define ICDC_APHPEN (ICDC_BASE + 0x040C) /* Anti-Pop HPEN Stage Timing Control Register */
+#define ICDC_APSR (ICDC_BASE + 0x0410) /* Anti-Pop Status Register */
+#define ICDC_CDCCR1 (ICDC_BASE + 0x0080)
+#define ICDC_CDCCR2 (ICDC_BASE + 0x0084)
+
+#define REG_ICDC_CR REG32(ICDC_CR)
+#define REG_ICDC_APWAIT REG32(ICDC_APWAIT)
+#define REG_ICDC_APPRE REG32(ICDC_APPRE)
+#define REG_ICDC_APHPEN REG32(ICDC_APHPEN)
+#define REG_ICDC_APSR REG32(ICDC_APSR)
+#define REG_ICDC_CDCCR1 REG32(ICDC_CDCCR1)
+#define REG_ICDC_CDCCR2 REG32(ICDC_CDCCR2)
+
+/* ICDC Control Register */
+#define ICDC_CR_LINVOL_BIT 24 /* LINE Input Volume Gain: GAIN=LINVOL*1.5-34.5 */
+#define ICDC_CR_LINVOL_MASK (0x1f << ICDC_CR_LINVOL_BIT)
+#define ICDC_CR_ASRATE_BIT 20 /* Audio Sample Rate */
+#define ICDC_CR_ASRATE_MASK (0x0f << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_8000 (0x0 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_11025 (0x1 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_12000 (0x2 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_16000 (0x3 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_22050 (0x4 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_24000 (0x5 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_32000 (0x6 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_44100 (0x7 << ICDC_CR_ASRATE_BIT)
+ #define ICDC_CR_ASRATE_48000 (0x8 << ICDC_CR_ASRATE_BIT)
+#define ICDC_CR_MICBG_BIT 18 /* MIC Boost Gain */
+#define ICDC_CR_MICBG_MASK (0x3 << ICDC_CR_MICBG_BIT)
+ #define ICDC_CR_MICBG_0DB (0x0 << ICDC_CR_MICBG_BIT)
+ #define ICDC_CR_MICBG_6DB (0x1 << ICDC_CR_MICBG_BIT)
+ #define ICDC_CR_MICBG_12DB (0x2 << ICDC_CR_MICBG_BIT)
+ #define ICDC_CR_MICBG_20DB (0x3 << ICDC_CR_MICBG_BIT)
+#define ICDC_CR_HPVOL_BIT 16 /* Headphone Volume Gain */
+#define ICDC_CR_HPVOL_MASK (0x3 << ICDC_CR_HPVOL_BIT)
+ #define ICDC_CR_HPVOL_0DB (0x0 << ICDC_CR_HPVOL_BIT)
+ #define ICDC_CR_HPVOL_2DB (0x1 << ICDC_CR_HPVOL_BIT)
+ #define ICDC_CR_HPVOL_4DB (0x2 << ICDC_CR_HPVOL_BIT)
+ #define ICDC_CR_HPVOL_6DB (0x3 << ICDC_CR_HPVOL_BIT)
+#define ICDC_CR_ELINEIN (1 << 13) /* Enable LINE Input */
+#define ICDC_CR_EMIC (1 << 12) /* Enable MIC Input */
+#define ICDC_CR_SW1ON (1 << 11) /* Switch 1 in CODEC is on */
+#define ICDC_CR_EADC (1 << 10) /* Enable ADC */
+#define ICDC_CR_SW2ON (1 << 9) /* Switch 2 in CODEC is on */
+#define ICDC_CR_EDAC (1 << 8) /* Enable DAC */
+#define ICDC_CR_HPMUTE (1 << 5) /* Headphone Mute */
+#define ICDC_CR_HPTON (1 << 4) /* Headphone Amplifier Trun On */
+#define ICDC_CR_HPTOFF (1 << 3) /* Headphone Amplifier Trun Off */
+#define ICDC_CR_TAAP (1 << 2) /* Turn Around of the Anti-Pop Procedure */
+#define ICDC_CR_EAP (1 << 1) /* Enable Anti-Pop Procedure */
+#define ICDC_CR_SUSPD (1 << 0) /* CODEC Suspend */
+
+/* Anti-Pop WAIT Stage Timing Control Register */
+#define ICDC_APWAIT_WAITSN_BIT 0
+#define ICDC_APWAIT_WAITSN_MASK (0x7ff << ICDC_APWAIT_WAITSN_BIT)
+
+/* Anti-Pop HPEN-PRE Stage Timing Control Register */
+#define ICDC_APPRE_PRESN_BIT 0
+#define ICDC_APPRE_PRESN_MASK (0x1ff << ICDC_APPRE_PRESN_BIT)
+
+/* Anti-Pop HPEN Stage Timing Control Register */
+#define ICDC_APHPEN_HPENSN_BIT 0
+#define ICDC_APHPEN_HPENSN_MASK (0x3fff << ICDC_APHPEN_HPENSN_BIT)
+
+/* Anti-Pop Status Register */
+#define ICDC_SR_HPST_BIT 14 /* Headphone Amplifier State */
+#define ICDC_SR_HPST_MASK (0x7 << ICDC_SR_HPST_BIT)
+#define ICDC_SR_HPST_HP_OFF (0x0 << ICDC_SR_HPST_BIT) /* HP amplifier is off */
+#define ICDC_SR_HPST_TON_WAIT (0x1 << ICDC_SR_HPST_BIT) /* wait state in turn-on */
+ #define ICDC_SR_HPST_TON_PRE (0x2 << ICDC_SR_HPST_BIT) /* pre-enable state in turn-on */
+#define ICDC_SR_HPST_TON_HPEN (0x3 << ICDC_SR_HPST_BIT) /* HP enable state in turn-on */
+ #define ICDC_SR_HPST_TOFF_HPEN (0x4 << ICDC_SR_HPST_BIT) /* HP enable state in turn-off */
+ #define ICDC_SR_HPST_TOFF_PRE (0x5 << ICDC_SR_HPST_BIT) /* pre-enable state in turn-off */
+ #define ICDC_SR_HPST_TOFF_WAIT (0x6 << ICDC_SR_HPST_BIT) /* wait state in turn-off */
+ #define ICDC_SR_HPST_HP_ON (0x7 << ICDC_SR_HPST_BIT) /* HP amplifier is on */
+#define ICDC_SR_SNCNT_BIT 0 /* Sample Number Counter */
+#define ICDC_SR_SNCNT_MASK (0x3fff << ICDC_SR_SNCNT_BIT)
+
+
+/*************************************************************************
+ * I2C
+ *************************************************************************/
+#define I2C_DR (I2C_BASE + 0x000)
+#define I2C_CR (I2C_BASE + 0x004)
+#define I2C_SR (I2C_BASE + 0x008)
+#define I2C_GR (I2C_BASE + 0x00C)
+
+#define REG_I2C_DR REG8(I2C_DR)
+#define REG_I2C_CR REG8(I2C_CR)
+#define REG_I2C_SR REG8(I2C_SR)
+#define REG_I2C_GR REG16(I2C_GR)
+
+/* I2C Control Register (I2C_CR) */
+
+#define I2C_CR_IEN (1 << 4)
+#define I2C_CR_STA (1 << 3)
+#define I2C_CR_STO (1 << 2)
+#define I2C_CR_AC (1 << 1)
+#define I2C_CR_I2CE (1 << 0)
+
+/* I2C Status Register (I2C_SR) */
+
+#define I2C_SR_STX (1 << 4)
+#define I2C_SR_BUSY (1 << 3)
+#define I2C_SR_TEND (1 << 2)
+#define I2C_SR_DRF (1 << 1)
+#define I2C_SR_ACKF (1 << 0)
+
+
+/*************************************************************************
+ * SSI
+ *************************************************************************/
+#define SSI_DR (SSI_BASE + 0x000)
+#define SSI_CR0 (SSI_BASE + 0x004)
+#define SSI_CR1 (SSI_BASE + 0x008)
+#define SSI_SR (SSI_BASE + 0x00C)
+#define SSI_ITR (SSI_BASE + 0x010)
+#define SSI_ICR (SSI_BASE + 0x014)
+#define SSI_GR (SSI_BASE + 0x018)
+
+#define REG_SSI_DR REG32(SSI_DR)
+#define REG_SSI_CR0 REG16(SSI_CR0)
+#define REG_SSI_CR1 REG32(SSI_CR1)
+#define REG_SSI_SR REG32(SSI_SR)
+#define REG_SSI_ITR REG16(SSI_ITR)
+#define REG_SSI_ICR REG8(SSI_ICR)
+#define REG_SSI_GR REG16(SSI_GR)
+
+/* SSI Data Register (SSI_DR) */
+
+#define SSI_DR_GPC_BIT 0
+#define SSI_DR_GPC_MASK (0x1ff << SSI_DR_GPC_BIT)
+
+/* SSI Control Register 0 (SSI_CR0) */
+
+#define SSI_CR0_SSIE (1 << 15)
+#define SSI_CR0_TIE (1 << 14)
+#define SSI_CR0_RIE (1 << 13)
+#define SSI_CR0_TEIE (1 << 12)
+#define SSI_CR0_REIE (1 << 11)
+#define SSI_CR0_LOOP (1 << 10)
+#define SSI_CR0_RFINE (1 << 9)
+#define SSI_CR0_RFINC (1 << 8)
+#define SSI_CR0_FSEL (1 << 6)
+#define SSI_CR0_TFLUSH (1 << 2)
+#define SSI_CR0_RFLUSH (1 << 1)
+#define SSI_CR0_DISREV (1 << 0)
+
+/* SSI Control Register 1 (SSI_CR1) */
+
+#define SSI_CR1_FRMHL_BIT 30
+#define SSI_CR1_FRMHL_MASK (0x3 << SSI_CR1_FRMHL_BIT)
+ #define SSI_CR1_FRMHL_CELOW_CE2LOW (0 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is low valid */
+ #define SSI_CR1_FRMHL_CEHIGH_CE2LOW (1 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is low valid */
+ #define SSI_CR1_FRMHL_CELOW_CE2HIGH (2 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is low valid and SSI_CE2_ is high valid */
+ #define SSI_CR1_FRMHL_CEHIGH_CE2HIGH (3 << SSI_CR1_FRMHL_BIT) /* SSI_CE_ is high valid and SSI_CE2_ is high valid */
+#define SSI_CR1_TFVCK_BIT 28
+#define SSI_CR1_TFVCK_MASK (0x3 << SSI_CR1_TFVCK_BIT)
+ #define SSI_CR1_TFVCK_0 (0 << SSI_CR1_TFVCK_BIT)
+ #define SSI_CR1_TFVCK_1 (1 << SSI_CR1_TFVCK_BIT)
+ #define SSI_CR1_TFVCK_2 (2 << SSI_CR1_TFVCK_BIT)
+ #define SSI_CR1_TFVCK_3 (3 << SSI_CR1_TFVCK_BIT)
+#define SSI_CR1_TCKFI_BIT 26
+#define SSI_CR1_TCKFI_MASK (0x3 << SSI_CR1_TCKFI_BIT)
+ #define SSI_CR1_TCKFI_0 (0 << SSI_CR1_TCKFI_BIT)
+ #define SSI_CR1_TCKFI_1 (1 << SSI_CR1_TCKFI_BIT)
+ #define SSI_CR1_TCKFI_2 (2 << SSI_CR1_TCKFI_BIT)
+ #define SSI_CR1_TCKFI_3 (3 << SSI_CR1_TCKFI_BIT)
+#define SSI_CR1_LFST (1 << 25)
+#define SSI_CR1_ITFRM (1 << 24)
+#define SSI_CR1_UNFIN (1 << 23)
+#define SSI_CR1_MULTS (1 << 22)
+#define SSI_CR1_FMAT_BIT 20
+#define SSI_CR1_FMAT_MASK (0x3 << SSI_CR1_FMAT_BIT)
+ #define SSI_CR1_FMAT_SPI (0 << SSI_CR1_FMAT_BIT) /* Motorola¡¯s SPI format */
+ #define SSI_CR1_FMAT_SSP (1 << SSI_CR1_FMAT_BIT) /* TI's SSP format */
+ #define SSI_CR1_FMAT_MW1 (2 << SSI_CR1_FMAT_BIT) /* National Microwire 1 format */
+ #define SSI_CR1_FMAT_MW2 (3 << SSI_CR1_FMAT_BIT) /* National Microwire 2 format */
+#define SSI_CR1_TTRG_BIT 16
+#define SSI_CR1_TTRG_MASK (0xf << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_1 (0 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_8 (1 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_16 (2 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_24 (3 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_32 (4 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_40 (5 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_48 (6 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_56 (7 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_64 (8 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_72 (9 << SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_80 (10<< SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_88 (11<< SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_96 (12<< SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_104 (13<< SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_112 (14<< SSI_CR1_TTRG_BIT)
+ #define SSI_CR1_TTRG_120 (15<< SSI_CR1_TTRG_BIT)
+#define SSI_CR1_MCOM_BIT 12
+#define SSI_CR1_MCOM_MASK (0xf << SSI_CR1_MCOM_BIT)
+ #define SSI_CR1_MCOM_1BIT (0x0 << SSI_CR1_MCOM_BIT) /* 1-bit command selected */
+ #define SSI_CR1_MCOM_2BIT (0x1 << SSI_CR1_MCOM_BIT) /* 2-bit command selected */
+ #define SSI_CR1_MCOM_3BIT (0x2 << SSI_CR1_MCOM_BIT) /* 3-bit command selected */
+ #define SSI_CR1_MCOM_4BIT (0x3 << SSI_CR1_MCOM_BIT) /* 4-bit command selected */
+ #define SSI_CR1_MCOM_5BIT (0x4 << SSI_CR1_MCOM_BIT) /* 5-bit command selected */
+ #define SSI_CR1_MCOM_6BIT (0x5 << SSI_CR1_MCOM_BIT) /* 6-bit command selected */
+ #define SSI_CR1_MCOM_7BIT (0x6 << SSI_CR1_MCOM_BIT) /* 7-bit command selected */
+ #define SSI_CR1_MCOM_8BIT (0x7 << SSI_CR1_MCOM_BIT) /* 8-bit command selected */
+ #define SSI_CR1_MCOM_9BIT (0x8 << SSI_CR1_MCOM_BIT) /* 9-bit command selected */
+ #define SSI_CR1_MCOM_10BIT (0x9 << SSI_CR1_MCOM_BIT) /* 10-bit command selected */
+ #define SSI_CR1_MCOM_11BIT (0xA << SSI_CR1_MCOM_BIT) /* 11-bit command selected */
+ #define SSI_CR1_MCOM_12BIT (0xB << SSI_CR1_MCOM_BIT) /* 12-bit command selected */
+ #define SSI_CR1_MCOM_13BIT (0xC << SSI_CR1_MCOM_BIT) /* 13-bit command selected */
+ #define SSI_CR1_MCOM_14BIT (0xD << SSI_CR1_MCOM_BIT) /* 14-bit command selected */
+ #define SSI_CR1_MCOM_15BIT (0xE << SSI_CR1_MCOM_BIT) /* 15-bit command selected */
+ #define SSI_CR1_MCOM_16BIT (0xF << SSI_CR1_MCOM_BIT) /* 16-bit command selected */
+#define SSI_CR1_RTRG_BIT 8
+#define SSI_CR1_RTRG_MASK (0xf << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_1 (0 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_8 (1 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_16 (2 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_24 (3 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_32 (4 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_40 (5 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_48 (6 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_56 (7 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_64 (8 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_72 (9 << SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_80 (10<< SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_88 (11<< SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_96 (12<< SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_104 (13<< SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_112 (14<< SSI_CR1_RTRG_BIT)
+ #define SSI_CR1_RTRG_120 (15<< SSI_CR1_RTRG_BIT)
+#define SSI_CR1_FLEN_BIT 4
+#define SSI_CR1_FLEN_MASK (0xf << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_2BIT (0x0 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_3BIT (0x1 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_4BIT (0x2 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_5BIT (0x3 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_6BIT (0x4 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_7BIT (0x5 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_8BIT (0x6 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_9BIT (0x7 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_10BIT (0x8 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_11BIT (0x9 << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_12BIT (0xA << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_13BIT (0xB << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_14BIT (0xC << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_15BIT (0xD << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_16BIT (0xE << SSI_CR1_FLEN_BIT)
+ #define SSI_CR1_FLEN_17BIT (0xF << SSI_CR1_FLEN_BIT)
+#define SSI_CR1_PHA (1 << 1)
+#define SSI_CR1_POL (1 << 0)
+
+/* SSI Status Register (SSI_SR) */
+
+#define SSI_SR_TFIFONUM_BIT 16
+#define SSI_SR_TFIFONUM_MASK (0xff << SSI_SR_TFIFONUM_BIT)
+#define SSI_SR_RFIFONUM_BIT 8
+#define SSI_SR_RFIFONUM_MASK (0xff << SSI_SR_RFIFONUM_BIT)
+#define SSI_SR_END (1 << 7)
+#define SSI_SR_BUSY (1 << 6)
+#define SSI_SR_TFF (1 << 5)
+#define SSI_SR_RFE (1 << 4)
+#define SSI_SR_TFHE (1 << 3)
+#define SSI_SR_RFHF (1 << 2)
+#define SSI_SR_UNDR (1 << 1)
+#define SSI_SR_OVER (1 << 0)
+
+/* SSI Interval Time Control Register (SSI_ITR) */
+
+#define SSI_ITR_CNTCLK (1 << 15)
+#define SSI_ITR_IVLTM_BIT 0
+#define SSI_ITR_IVLTM_MASK (0x7fff << SSI_ITR_IVLTM_BIT)
+
+
+/*************************************************************************
+ * MSC
+ *************************************************************************/
+#define MSC_STRPCL (MSC_BASE + 0x000)
+#define MSC_STAT (MSC_BASE + 0x004)
+#define MSC_CLKRT (MSC_BASE + 0x008)
+#define MSC_CMDAT (MSC_BASE + 0x00C)
+#define MSC_RESTO (MSC_BASE + 0x010)
+#define MSC_RDTO (MSC_BASE + 0x014)
+#define MSC_BLKLEN (MSC_BASE + 0x018)
+#define MSC_NOB (MSC_BASE + 0x01C)
+#define MSC_SNOB (MSC_BASE + 0x020)
+#define MSC_IMASK (MSC_BASE + 0x024)
+#define MSC_IREG (MSC_BASE + 0x028)
+#define MSC_CMD (MSC_BASE + 0x02C)
+#define MSC_ARG (MSC_BASE + 0x030)
+#define MSC_RES (MSC_BASE + 0x034)
+#define MSC_RXFIFO (MSC_BASE + 0x038)
+#define MSC_TXFIFO (MSC_BASE + 0x03C)
+
+#define REG_MSC_STRPCL REG16(MSC_STRPCL)
+#define REG_MSC_STAT REG32(MSC_STAT)
+#define REG_MSC_CLKRT REG16(MSC_CLKRT)
+#define REG_MSC_CMDAT REG32(MSC_CMDAT)
+#define REG_MSC_RESTO REG16(MSC_RESTO)
+#define REG_MSC_RDTO REG16(MSC_RDTO)
+#define REG_MSC_BLKLEN REG16(MSC_BLKLEN)
+#define REG_MSC_NOB REG16(MSC_NOB)
+#define REG_MSC_SNOB REG16(MSC_SNOB)
+#define REG_MSC_IMASK REG16(MSC_IMASK)
+#define REG_MSC_IREG REG16(MSC_IREG)
+#define REG_MSC_CMD REG8(MSC_CMD)
+#define REG_MSC_ARG REG32(MSC_ARG)
+#define REG_MSC_RES REG16(MSC_RES)
+#define REG_MSC_RXFIFO REG32(MSC_RXFIFO)
+#define REG_MSC_TXFIFO REG32(MSC_TXFIFO)
+
+/* MSC Clock and Control Register (MSC_STRPCL) */
+
+#define MSC_STRPCL_EXIT_MULTIPLE (1 << 7)
+#define MSC_STRPCL_EXIT_TRANSFER (1 << 6)
+#define MSC_STRPCL_START_READWAIT (1 << 5)
+#define MSC_STRPCL_STOP_READWAIT (1 << 4)
+#define MSC_STRPCL_RESET (1 << 3)
+#define MSC_STRPCL_START_OP (1 << 2)
+#define MSC_STRPCL_CLOCK_CONTROL_BIT 0
+#define MSC_STRPCL_CLOCK_CONTROL_MASK (0x3 << MSC_STRPCL_CLOCK_CONTROL_BIT)
+ #define MSC_STRPCL_CLOCK_CONTROL_STOP (0x1 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Stop MMC/SD clock */
+ #define MSC_STRPCL_CLOCK_CONTROL_START (0x2 << MSC_STRPCL_CLOCK_CONTROL_BIT) /* Start MMC/SD clock */
+
+/* MSC Status Register (MSC_STAT) */
+
+#define MSC_STAT_IS_RESETTING (1 << 15)
+#define MSC_STAT_SDIO_INT_ACTIVE (1 << 14)
+#define MSC_STAT_PRG_DONE (1 << 13)
+#define MSC_STAT_DATA_TRAN_DONE (1 << 12)
+#define MSC_STAT_END_CMD_RES (1 << 11)
+#define MSC_STAT_DATA_FIFO_AFULL (1 << 10)
+#define MSC_STAT_IS_READWAIT (1 << 9)
+#define MSC_STAT_CLK_EN (1 << 8)
+#define MSC_STAT_DATA_FIFO_FULL (1 << 7)
+#define MSC_STAT_DATA_FIFO_EMPTY (1 << 6)
+#define MSC_STAT_CRC_RES_ERR (1 << 5)
+#define MSC_STAT_CRC_READ_ERROR (1 << 4)
+#define MSC_STAT_CRC_WRITE_ERROR_BIT 2
+#define MSC_STAT_CRC_WRITE_ERROR_MASK (0x3 << MSC_STAT_CRC_WRITE_ERROR_BIT)
+ #define MSC_STAT_CRC_WRITE_ERROR_NO (0 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No error on transmission of data */
+ #define MSC_STAT_CRC_WRITE_ERROR (1 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* Card observed erroneous transmission of data */
+ #define MSC_STAT_CRC_WRITE_ERROR_NOSTS (2 << MSC_STAT_CRC_WRITE_ERROR_BIT) /* No CRC status is sent back */
+#define MSC_STAT_TIME_OUT_RES (1 << 1)
+#define MSC_STAT_TIME_OUT_READ (1 << 0)
+
+/* MSC Bus Clock Control Register (MSC_CLKRT) */
+
+#define MSC_CLKRT_CLK_RATE_BIT 0
+#define MSC_CLKRT_CLK_RATE_MASK (0x7 << MSC_CLKRT_CLK_RATE_BIT)
+ #define MSC_CLKRT_CLK_RATE_DIV_1 (0x0 << MSC_CLKRT_CLK_RATE_BIT) /* CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_2 (0x1 << MSC_CLKRT_CLK_RATE_BIT) /* 1/2 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_4 (0x2 << MSC_CLKRT_CLK_RATE_BIT) /* 1/4 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_8 (0x3 << MSC_CLKRT_CLK_RATE_BIT) /* 1/8 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_16 (0x4 << MSC_CLKRT_CLK_RATE_BIT) /* 1/16 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_32 (0x5 << MSC_CLKRT_CLK_RATE_BIT) /* 1/32 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_64 (0x6 << MSC_CLKRT_CLK_RATE_BIT) /* 1/64 of CLK_SRC */
+ #define MSC_CLKRT_CLK_RATE_DIV_128 (0x7 << MSC_CLKRT_CLK_RATE_BIT) /* 1/128 of CLK_SRC */
+
+/* MSC Command Sequence Control Register (MSC_CMDAT) */
+
+#define MSC_CMDAT_IO_ABORT (1 << 11)
+#define MSC_CMDAT_BUS_WIDTH_BIT 9
+#define MSC_CMDAT_BUS_WIDTH_MASK (0x3 << MSC_CMDAT_BUS_WIDTH_BIT)
+ #define MSC_CMDAT_BUS_WIDTH_1BIT (0x0 << MSC_CMDAT_BUS_WIDTH_BIT) /* 1-bit data bus */
+ #define MSC_CMDAT_BUS_WIDTH_4BIT (0x2 << MSC_CMDAT_BUS_WIDTH_BIT) /* 4-bit data bus */
+ #define CMDAT_BUS_WIDTH1 (0x0 << MSC_CMDAT_BUS_WIDTH_BIT)
+ #define CMDAT_BUS_WIDTH4 (0x2 << MSC_CMDAT_BUS_WIDTH_BIT)
+#define MSC_CMDAT_DMA_EN (1 << 8)
+#define MSC_CMDAT_INIT (1 << 7)
+#define MSC_CMDAT_BUSY (1 << 6)
+#define MSC_CMDAT_STREAM_BLOCK (1 << 5)
+#define MSC_CMDAT_WRITE (1 << 4)
+#define MSC_CMDAT_READ (0 << 4)
+#define MSC_CMDAT_DATA_EN (1 << 3)
+#define MSC_CMDAT_RESPONSE_BIT 0
+#define MSC_CMDAT_RESPONSE_MASK (0x7 << MSC_CMDAT_RESPONSE_BIT)
+ #define MSC_CMDAT_RESPONSE_NONE (0x0 << MSC_CMDAT_RESPONSE_BIT) /* No response */
+ #define MSC_CMDAT_RESPONSE_R1 (0x1 << MSC_CMDAT_RESPONSE_BIT) /* Format R1 and R1b */
+ #define MSC_CMDAT_RESPONSE_R2 (0x2 << MSC_CMDAT_RESPONSE_BIT) /* Format R2 */
+ #define MSC_CMDAT_RESPONSE_R3 (0x3 << MSC_CMDAT_RESPONSE_BIT) /* Format R3 */
+ #define MSC_CMDAT_RESPONSE_R4 (0x4 << MSC_CMDAT_RESPONSE_BIT) /* Format R4 */
+ #define MSC_CMDAT_RESPONSE_R5 (0x5 << MSC_CMDAT_RESPONSE_BIT) /* Format R5 */
+ #define MSC_CMDAT_RESPONSE_R6 (0x6 << MSC_CMDAT_RESPONSE_BIT) /* Format R6 */
+
+#define CMDAT_DMA_EN (1 << 8)
+#define CMDAT_INIT (1 << 7)
+#define CMDAT_BUSY (1 << 6)
+#define CMDAT_STREAM (1 << 5)
+#define CMDAT_WRITE (1 << 4)
+#define CMDAT_DATA_EN (1 << 3)
+
+/* MSC Interrupts Mask Register (MSC_IMASK) */
+
+#define MSC_IMASK_SDIO (1 << 7)
+#define MSC_IMASK_TXFIFO_WR_REQ (1 << 6)
+#define MSC_IMASK_RXFIFO_RD_REQ (1 << 5)
+#define MSC_IMASK_END_CMD_RES (1 << 2)
+#define MSC_IMASK_PRG_DONE (1 << 1)
+#define MSC_IMASK_DATA_TRAN_DONE (1 << 0)
+
+
+/* MSC Interrupts Status Register (MSC_IREG) */
+
+#define MSC_IREG_SDIO (1 << 7)
+#define MSC_IREG_TXFIFO_WR_REQ (1 << 6)
+#define MSC_IREG_RXFIFO_RD_REQ (1 << 5)
+#define MSC_IREG_END_CMD_RES (1 << 2)
+#define MSC_IREG_PRG_DONE (1 << 1)
+#define MSC_IREG_DATA_TRAN_DONE (1 << 0)
+
+
+/*************************************************************************
+ * EMC (External Memory Controller)
+ *************************************************************************/
+#define EMC_BCR (EMC_BASE + 0x0) /* BCR */
+
+#define EMC_SMCR0 (EMC_BASE + 0x10) /* Static Memory Control Register 0 */
+#define EMC_SMCR1 (EMC_BASE + 0x14) /* Static Memory Control Register 1 */
+#define EMC_SMCR2 (EMC_BASE + 0x18) /* Static Memory Control Register 2 */
+#define EMC_SMCR3 (EMC_BASE + 0x1c) /* Static Memory Control Register 3 */
+#define EMC_SMCR4 (EMC_BASE + 0x20) /* Static Memory Control Register 4 */
+#define EMC_SACR0 (EMC_BASE + 0x30) /* Static Memory Bank 0 Addr Config Reg */
+#define EMC_SACR1 (EMC_BASE + 0x34) /* Static Memory Bank 1 Addr Config Reg */
+#define EMC_SACR2 (EMC_BASE + 0x38) /* Static Memory Bank 2 Addr Config Reg */
+#define EMC_SACR3 (EMC_BASE + 0x3c) /* Static Memory Bank 3 Addr Config Reg */
+#define EMC_SACR4 (EMC_BASE + 0x40) /* Static Memory Bank 4 Addr Config Reg */
+
+#define EMC_NFCSR (EMC_BASE + 0x050) /* NAND Flash Control/Status Register */
+#define EMC_NFECR (EMC_BASE + 0x100) /* NAND Flash ECC Control Register */
+#define EMC_NFECC (EMC_BASE + 0x104) /* NAND Flash ECC Data Register */
+#define EMC_NFPAR0 (EMC_BASE + 0x108) /* NAND Flash RS Parity 0 Register */
+#define EMC_NFPAR1 (EMC_BASE + 0x10c) /* NAND Flash RS Parity 1 Register */
+#define EMC_NFPAR2 (EMC_BASE + 0x110) /* NAND Flash RS Parity 2 Register */
+#define EMC_NFINTS (EMC_BASE + 0x114) /* NAND Flash Interrupt Status Register */
+#define EMC_NFINTE (EMC_BASE + 0x118) /* NAND Flash Interrupt Enable Register */
+#define EMC_NFERR0 (EMC_BASE + 0x11c) /* NAND Flash RS Error Report 0 Register */
+#define EMC_NFERR1 (EMC_BASE + 0x120) /* NAND Flash RS Error Report 1 Register */
+#define EMC_NFERR2 (EMC_BASE + 0x124) /* NAND Flash RS Error Report 2 Register */
+#define EMC_NFERR3 (EMC_BASE + 0x128) /* NAND Flash RS Error Report 3 Register */
+
+#define EMC_DMCR (EMC_BASE + 0x80) /* DRAM Control Register */
+#define EMC_RTCSR (EMC_BASE + 0x84) /* Refresh Time Control/Status Register */
+#define EMC_RTCNT (EMC_BASE + 0x88) /* Refresh Timer Counter */
+#define EMC_RTCOR (EMC_BASE + 0x8c) /* Refresh Time Constant Register */
+#define EMC_DMAR0 (EMC_BASE + 0x90) /* SDRAM Bank 0 Addr Config Register */
+#define EMC_SDMR0 (EMC_BASE + 0xa000) /* Mode Register of SDRAM bank 0 */
+
+#define REG_EMC_BCR REG32(EMC_BCR)
+
+#define REG_EMC_SMCR0 REG32(EMC_SMCR0)
+#define REG_EMC_SMCR1 REG32(EMC_SMCR1)
+#define REG_EMC_SMCR2 REG32(EMC_SMCR2)
+#define REG_EMC_SMCR3 REG32(EMC_SMCR3)
+#define REG_EMC_SMCR4 REG32(EMC_SMCR4)
+#define REG_EMC_SACR0 REG32(EMC_SACR0)
+#define REG_EMC_SACR1 REG32(EMC_SACR1)
+#define REG_EMC_SACR2 REG32(EMC_SACR2)
+#define REG_EMC_SACR3 REG32(EMC_SACR3)
+#define REG_EMC_SACR4 REG32(EMC_SACR4)
+
+#define REG_EMC_NFCSR REG32(EMC_NFCSR)
+#define REG_EMC_NFECR REG32(EMC_NFECR)
+#define REG_EMC_NFECC REG32(EMC_NFECC)
+#define REG_EMC_NFPAR0 REG32(EMC_NFPAR0)
+#define REG_EMC_NFPAR1 REG32(EMC_NFPAR1)
+#define REG_EMC_NFPAR2 REG32(EMC_NFPAR2)
+#define REG_EMC_NFINTS REG32(EMC_NFINTS)
+#define REG_EMC_NFINTE REG32(EMC_NFINTE)
+#define REG_EMC_NFERR0 REG32(EMC_NFERR0)
+#define REG_EMC_NFERR1 REG32(EMC_NFERR1)
+#define REG_EMC_NFERR2 REG32(EMC_NFERR2)
+#define REG_EMC_NFERR3 REG32(EMC_NFERR3)
+
+#define REG_EMC_DMCR REG32(EMC_DMCR)
+#define REG_EMC_RTCSR REG16(EMC_RTCSR)
+#define REG_EMC_RTCNT REG16(EMC_RTCNT)
+#define REG_EMC_RTCOR REG16(EMC_RTCOR)
+#define REG_EMC_DMAR0 REG32(EMC_DMAR0)
+
+/* Static Memory Control Register */
+#define EMC_SMCR_STRV_BIT 24
+#define EMC_SMCR_STRV_MASK (0x0f << EMC_SMCR_STRV_BIT)
+#define EMC_SMCR_TAW_BIT 20
+#define EMC_SMCR_TAW_MASK (0x0f << EMC_SMCR_TAW_BIT)
+#define EMC_SMCR_TBP_BIT 16
+#define EMC_SMCR_TBP_MASK (0x0f << EMC_SMCR_TBP_BIT)
+#define EMC_SMCR_TAH_BIT 12
+#define EMC_SMCR_TAH_MASK (0x07 << EMC_SMCR_TAH_BIT)
+#define EMC_SMCR_TAS_BIT 8
+#define EMC_SMCR_TAS_MASK (0x07 << EMC_SMCR_TAS_BIT)
+#define EMC_SMCR_BW_BIT 6
+#define EMC_SMCR_BW_MASK (0x03 << EMC_SMCR_BW_BIT)
+ #define EMC_SMCR_BW_8BIT (0 << EMC_SMCR_BW_BIT)
+ #define EMC_SMCR_BW_16BIT (1 << EMC_SMCR_BW_BIT)
+ #define EMC_SMCR_BW_32BIT (2 << EMC_SMCR_BW_BIT)
+#define EMC_SMCR_BCM (1 << 3)
+#define EMC_SMCR_BL_BIT 1
+#define EMC_SMCR_BL_MASK (0x03 << EMC_SMCR_BL_BIT)
+ #define EMC_SMCR_BL_4 (0 << EMC_SMCR_BL_BIT)
+ #define EMC_SMCR_BL_8 (1 << EMC_SMCR_BL_BIT)
+ #define EMC_SMCR_BL_16 (2 << EMC_SMCR_BL_BIT)
+ #define EMC_SMCR_BL_32 (3 << EMC_SMCR_BL_BIT)
+#define EMC_SMCR_SMT (1 << 0)
+
+/* Static Memory Bank Addr Config Reg */
+#define EMC_SACR_BASE_BIT 8
+#define EMC_SACR_BASE_MASK (0xff << EMC_SACR_BASE_BIT)
+#define EMC_SACR_MASK_BIT 0
+#define EMC_SACR_MASK_MASK (0xff << EMC_SACR_MASK_BIT)
+
+/* NAND Flash Control/Status Register */
+#define EMC_NFCSR_NFCE4 (1 << 7) /* NAND Flash Enable */
+#define EMC_NFCSR_NFE4 (1 << 6) /* NAND Flash FCE# Assertion Enable */
+#define EMC_NFCSR_NFCE3 (1 << 5)
+#define EMC_NFCSR_NFE3 (1 << 4)
+#define EMC_NFCSR_NFCE2 (1 << 3)
+#define EMC_NFCSR_NFE2 (1 << 2)
+#define EMC_NFCSR_NFCE1 (1 << 1)
+#define EMC_NFCSR_NFE1 (1 << 0)
+
+/* NAND Flash ECC Control Register */
+#define EMC_NFECR_PRDY (1 << 4) /* Parity Ready */
+#define EMC_NFECR_RS_DECODING (0 << 3) /* RS is in decoding phase */
+#define EMC_NFECR_RS_ENCODING (1 << 3) /* RS is in encoding phase */
+#define EMC_NFECR_HAMMING (0 << 2) /* Select HAMMING Correction Algorithm */
+#define EMC_NFECR_RS (1 << 2) /* Select RS Correction Algorithm */
+#define EMC_NFECR_ERST (1 << 1) /* ECC Reset */
+#define EMC_NFECR_ECCE (1 << 0) /* ECC Enable */
+
+/* NAND Flash ECC Data Register */
+#define EMC_NFECC_ECC2_BIT 16
+#define EMC_NFECC_ECC2_MASK (0xff << EMC_NFECC_ECC2_BIT)
+#define EMC_NFECC_ECC1_BIT 8
+#define EMC_NFECC_ECC1_MASK (0xff << EMC_NFECC_ECC1_BIT)
+#define EMC_NFECC_ECC0_BIT 0
+#define EMC_NFECC_ECC0_MASK (0xff << EMC_NFECC_ECC0_BIT)
+
+/* NAND Flash Interrupt Status Register */
+#define EMC_NFINTS_ERRCNT_BIT 29 /* Error Count */
+#define EMC_NFINTS_ERRCNT_MASK (0x7 << EMC_NFINTS_ERRCNT_BIT)
+#define EMC_NFINTS_PADF (1 << 4) /* Padding Finished */
+#define EMC_NFINTS_DECF (1 << 3) /* Decoding Finished */
+#define EMC_NFINTS_ENCF (1 << 2) /* Encoding Finished */
+#define EMC_NFINTS_UNCOR (1 << 1) /* Uncorrectable Error Occurred */
+#define EMC_NFINTS_ERR (1 << 0) /* Error Occurred */
+
+/* NAND Flash Interrupt Enable Register */
+#define EMC_NFINTE_PADFE (1 << 4) /* Padding Finished Interrupt Enable */
+#define EMC_NFINTE_DECFE (1 << 3) /* Decoding Finished Interrupt Enable */
+#define EMC_NFINTE_ENCFE (1 << 2) /* Encoding Finished Interrupt Enable */
+#define EMC_NFINTE_UNCORE (1 << 1) /* Uncorrectable Error Occurred Intr Enable */
+#define EMC_NFINTE_ERRE (1 << 0) /* Error Occurred Interrupt */
+
+/* NAND Flash RS Error Report Register */
+#define EMC_NFERR_INDEX_BIT 16 /* Error Symbol Index */
+#define EMC_NFERR_INDEX_MASK (0x1ff << EMC_NFERR_INDEX_BIT)
+#define EMC_NFERR_MASK_BIT 0 /* Error Symbol Value */
+#define EMC_NFERR_MASK_MASK (0x1ff << EMC_NFERR_MASK_BIT)
+
+
+/* DRAM Control Register */
+#define EMC_DMCR_BW_BIT 31
+#define EMC_DMCR_BW (1 << EMC_DMCR_BW_BIT)
+#define EMC_DMCR_CA_BIT 26
+#define EMC_DMCR_CA_MASK (0x07 << EMC_DMCR_CA_BIT)
+ #define EMC_DMCR_CA_8 (0 << EMC_DMCR_CA_BIT)
+ #define EMC_DMCR_CA_9 (1 << EMC_DMCR_CA_BIT)
+ #define EMC_DMCR_CA_10 (2 << EMC_DMCR_CA_BIT)
+ #define EMC_DMCR_CA_11 (3 << EMC_DMCR_CA_BIT)
+ #define EMC_DMCR_CA_12 (4 << EMC_DMCR_CA_BIT)
+#define EMC_DMCR_RMODE (1 << 25)
+#define EMC_DMCR_RFSH (1 << 24)
+#define EMC_DMCR_MRSET (1 << 23)
+#define EMC_DMCR_RA_BIT 20
+#define EMC_DMCR_RA_MASK (0x03 << EMC_DMCR_RA_BIT)
+ #define EMC_DMCR_RA_11 (0 << EMC_DMCR_RA_BIT)
+ #define EMC_DMCR_RA_12 (1 << EMC_DMCR_RA_BIT)
+ #define EMC_DMCR_RA_13 (2 << EMC_DMCR_RA_BIT)
+#define EMC_DMCR_BA_BIT 19
+#define EMC_DMCR_BA (1 << EMC_DMCR_BA_BIT)
+#define EMC_DMCR_PDM (1 << 18)
+#define EMC_DMCR_EPIN (1 << 17)
+#define EMC_DMCR_TRAS_BIT 13
+#define EMC_DMCR_TRAS_MASK (0x07 << EMC_DMCR_TRAS_BIT)
+#define EMC_DMCR_RCD_BIT 11
+#define EMC_DMCR_RCD_MASK (0x03 << EMC_DMCR_RCD_BIT)
+#define EMC_DMCR_TPC_BIT 8
+#define EMC_DMCR_TPC_MASK (0x07 << EMC_DMCR_TPC_BIT)
+#define EMC_DMCR_TRWL_BIT 5
+#define EMC_DMCR_TRWL_MASK (0x03 << EMC_DMCR_TRWL_BIT)
+#define EMC_DMCR_TRC_BIT 2
+#define EMC_DMCR_TRC_MASK (0x07 << EMC_DMCR_TRC_BIT)
+#define EMC_DMCR_TCL_BIT 0
+#define EMC_DMCR_TCL_MASK (0x03 << EMC_DMCR_TCL_BIT)
+
+/* Refresh Time Control/Status Register */
+#define EMC_RTCSR_CMF (1 << 7)
+#define EMC_RTCSR_CKS_BIT 0
+#define EMC_RTCSR_CKS_MASK (0x07 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_DISABLE (0 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_4 (1 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_16 (2 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_64 (3 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_256 (4 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_1024 (5 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_2048 (6 << EMC_RTCSR_CKS_BIT)
+ #define EMC_RTCSR_CKS_4096 (7 << EMC_RTCSR_CKS_BIT)
+
+/* SDRAM Bank Address Configuration Register */
+#define EMC_DMAR_BASE_BIT 8
+#define EMC_DMAR_BASE_MASK (0xff << EMC_DMAR_BASE_BIT)
+#define EMC_DMAR_MASK_BIT 0
+#define EMC_DMAR_MASK_MASK (0xff << EMC_DMAR_MASK_BIT)
+
+/* Mode Register of SDRAM bank 0 */
+#define EMC_SDMR_BM (1 << 9) /* Write Burst Mode */
+#define EMC_SDMR_OM_BIT 7 /* Operating Mode */
+#define EMC_SDMR_OM_MASK (3 << EMC_SDMR_OM_BIT)
+ #define EMC_SDMR_OM_NORMAL (0 << EMC_SDMR_OM_BIT)
+#define EMC_SDMR_CAS_BIT 4 /* CAS Latency */
+#define EMC_SDMR_CAS_MASK (7 << EMC_SDMR_CAS_BIT)
+ #define EMC_SDMR_CAS_1 (1 << EMC_SDMR_CAS_BIT)
+ #define EMC_SDMR_CAS_2 (2 << EMC_SDMR_CAS_BIT)
+ #define EMC_SDMR_CAS_3 (3 << EMC_SDMR_CAS_BIT)
+#define EMC_SDMR_BT_BIT 3 /* Burst Type */
+#define EMC_SDMR_BT_MASK (1 << EMC_SDMR_BT_BIT)
+ #define EMC_SDMR_BT_SEQ (0 << EMC_SDMR_BT_BIT) /* Sequential */
+ #define EMC_SDMR_BT_INT (1 << EMC_SDMR_BT_BIT) /* Interleave */
+#define EMC_SDMR_BL_BIT 0 /* Burst Length */
+#define EMC_SDMR_BL_MASK (7 << EMC_SDMR_BL_BIT)
+ #define EMC_SDMR_BL_1 (0 << EMC_SDMR_BL_BIT)
+ #define EMC_SDMR_BL_2 (1 << EMC_SDMR_BL_BIT)
+ #define EMC_SDMR_BL_4 (2 << EMC_SDMR_BL_BIT)
+ #define EMC_SDMR_BL_8 (3 << EMC_SDMR_BL_BIT)
+
+#define EMC_SDMR_CAS2_16BIT \
+ (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
+#define EMC_SDMR_CAS2_32BIT \
+ (EMC_SDMR_CAS_2 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
+#define EMC_SDMR_CAS3_16BIT \
+ (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_2)
+#define EMC_SDMR_CAS3_32BIT \
+ (EMC_SDMR_CAS_3 | EMC_SDMR_BT_SEQ | EMC_SDMR_BL_4)
+
+/*************************************************************************
+ * CIM
+ *************************************************************************/
+#define CIM_CFG (CIM_BASE + 0x0000)
+#define CIM_CTRL (CIM_BASE + 0x0004)
+#define CIM_STATE (CIM_BASE + 0x0008)
+#define CIM_IID (CIM_BASE + 0x000C)
+#define CIM_RXFIFO (CIM_BASE + 0x0010)
+#define CIM_DA (CIM_BASE + 0x0020)
+#define CIM_FA (CIM_BASE + 0x0024)
+#define CIM_FID (CIM_BASE + 0x0028)
+#define CIM_CMD (CIM_BASE + 0x002C)
+
+#define REG_CIM_CFG REG32(CIM_CFG)
+#define REG_CIM_CTRL REG32(CIM_CTRL)
+#define REG_CIM_STATE REG32(CIM_STATE)
+#define REG_CIM_IID REG32(CIM_IID)
+#define REG_CIM_RXFIFO REG32(CIM_RXFIFO)
+#define REG_CIM_DA REG32(CIM_DA)
+#define REG_CIM_FA REG32(CIM_FA)
+#define REG_CIM_FID REG32(CIM_FID)
+#define REG_CIM_CMD REG32(CIM_CMD)
+
+/* CIM Configuration Register (CIM_CFG) */
+
+#define CIM_CFG_INV_DAT (1 << 15)
+#define CIM_CFG_VSP (1 << 14)
+#define CIM_CFG_HSP (1 << 13)
+#define CIM_CFG_PCP (1 << 12)
+#define CIM_CFG_DUMMY_ZERO (1 << 9)
+#define CIM_CFG_EXT_VSYNC (1 << 8)
+#define CIM_CFG_PACK_BIT 4
+#define CIM_CFG_PACK_MASK (0x7 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_0 (0 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_1 (1 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_2 (2 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_3 (3 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_4 (4 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_5 (5 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_6 (6 << CIM_CFG_PACK_BIT)
+ #define CIM_CFG_PACK_7 (7 << CIM_CFG_PACK_BIT)
+#define CIM_CFG_DSM_BIT 0
+#define CIM_CFG_DSM_MASK (0x3 << CIM_CFG_DSM_BIT)
+ #define CIM_CFG_DSM_CPM (0 << CIM_CFG_DSM_BIT) /* CCIR656 Progressive Mode */
+ #define CIM_CFG_DSM_CIM (1 << CIM_CFG_DSM_BIT) /* CCIR656 Interlace Mode */
+ #define CIM_CFG_DSM_GCM (2 << CIM_CFG_DSM_BIT) /* Gated Clock Mode */
+ #define CIM_CFG_DSM_NGCM (3 << CIM_CFG_DSM_BIT) /* Non-Gated Clock Mode */
+
+/* CIM Control Register (CIM_CTRL) */
+
+#define CIM_CTRL_MCLKDIV_BIT 24
+#define CIM_CTRL_MCLKDIV_MASK (0xff << CIM_CTRL_MCLKDIV_BIT)
+#define CIM_CTRL_FRC_BIT 16
+#define CIM_CTRL_FRC_MASK (0xf << CIM_CTRL_FRC_BIT)
+ #define CIM_CTRL_FRC_1 (0x0 << CIM_CTRL_FRC_BIT) /* Sample every frame */
+ #define CIM_CTRL_FRC_2 (0x1 << CIM_CTRL_FRC_BIT) /* Sample 1/2 frame */
+ #define CIM_CTRL_FRC_3 (0x2 << CIM_CTRL_FRC_BIT) /* Sample 1/3 frame */
+ #define CIM_CTRL_FRC_4 (0x3 << CIM_CTRL_FRC_BIT) /* Sample 1/4 frame */
+ #define CIM_CTRL_FRC_5 (0x4 << CIM_CTRL_FRC_BIT) /* Sample 1/5 frame */
+ #define CIM_CTRL_FRC_6 (0x5 << CIM_CTRL_FRC_BIT) /* Sample 1/6 frame */
+ #define CIM_CTRL_FRC_7 (0x6 << CIM_CTRL_FRC_BIT) /* Sample 1/7 frame */
+ #define CIM_CTRL_FRC_8 (0x7 << CIM_CTRL_FRC_BIT) /* Sample 1/8 frame */
+ #define CIM_CTRL_FRC_9 (0x8 << CIM_CTRL_FRC_BIT) /* Sample 1/9 frame */
+ #define CIM_CTRL_FRC_10 (0x9 << CIM_CTRL_FRC_BIT) /* Sample 1/10 frame */
+ #define CIM_CTRL_FRC_11 (0xA << CIM_CTRL_FRC_BIT) /* Sample 1/11 frame */
+ #define CIM_CTRL_FRC_12 (0xB << CIM_CTRL_FRC_BIT) /* Sample 1/12 frame */
+ #define CIM_CTRL_FRC_13 (0xC << CIM_CTRL_FRC_BIT) /* Sample 1/13 frame */
+ #define CIM_CTRL_FRC_14 (0xD << CIM_CTRL_FRC_BIT) /* Sample 1/14 frame */
+ #define CIM_CTRL_FRC_15 (0xE << CIM_CTRL_FRC_BIT) /* Sample 1/15 frame */
+ #define CIM_CTRL_FRC_16 (0xF << CIM_CTRL_FRC_BIT) /* Sample 1/16 frame */
+#define CIM_CTRL_VDDM (1 << 13)
+#define CIM_CTRL_DMA_SOFM (1 << 12)
+#define CIM_CTRL_DMA_EOFM (1 << 11)
+#define CIM_CTRL_DMA_STOPM (1 << 10)
+#define CIM_CTRL_RXF_TRIGM (1 << 9)
+#define CIM_CTRL_RXF_OFM (1 << 8)
+#define CIM_CTRL_RXF_TRIG_BIT 4
+#define CIM_CTRL_RXF_TRIG_MASK (0x7 << CIM_CTRL_RXF_TRIG_BIT)
+ #define CIM_CTRL_RXF_TRIG_4 (0 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 4 */
+ #define CIM_CTRL_RXF_TRIG_8 (1 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 8 */
+ #define CIM_CTRL_RXF_TRIG_12 (2 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 12 */
+ #define CIM_CTRL_RXF_TRIG_16 (3 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 16 */
+ #define CIM_CTRL_RXF_TRIG_20 (4 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 20 */
+ #define CIM_CTRL_RXF_TRIG_24 (5 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 24 */
+ #define CIM_CTRL_RXF_TRIG_28 (6 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 28 */
+ #define CIM_CTRL_RXF_TRIG_32 (7 << CIM_CTRL_RXF_TRIG_BIT) /* RXFIFO Trigger Value is 32 */
+#define CIM_CTRL_DMA_EN (1 << 2)
+#define CIM_CTRL_RXF_RST (1 << 1)
+#define CIM_CTRL_ENA (1 << 0)
+
+/* CIM State Register (CIM_STATE) */
+
+#define CIM_STATE_DMA_SOF (1 << 6)
+#define CIM_STATE_DMA_EOF (1 << 5)
+#define CIM_STATE_DMA_STOP (1 << 4)
+#define CIM_STATE_RXF_OF (1 << 3)
+#define CIM_STATE_RXF_TRIG (1 << 2)
+#define CIM_STATE_RXF_EMPTY (1 << 1)
+#define CIM_STATE_VDD (1 << 0)
+
+/* CIM DMA Command Register (CIM_CMD) */
+
+#define CIM_CMD_SOFINT (1 << 31)
+#define CIM_CMD_EOFINT (1 << 30)
+#define CIM_CMD_STOP (1 << 28)
+#define CIM_CMD_LEN_BIT 0
+#define CIM_CMD_LEN_MASK (0xffffff << CIM_CMD_LEN_BIT)
+
+
+/*************************************************************************
+ * SADC (Smart A/D Controller)
+ *************************************************************************/
+
+#define SADC_ENA (SADC_BASE + 0x00) /* ADC Enable Register */
+#define SADC_CFG (SADC_BASE + 0x04) /* ADC Configure Register */
+#define SADC_CTRL (SADC_BASE + 0x08) /* ADC Control Register */
+#define SADC_STATE (SADC_BASE + 0x0C) /* ADC Status Register*/
+#define SADC_SAMETIME (SADC_BASE + 0x10) /* ADC Same Point Time Register */
+#define SADC_WAITTIME (SADC_BASE + 0x14) /* ADC Wait Time Register */
+#define SADC_TSDAT (SADC_BASE + 0x18) /* ADC Touch Screen Data Register */
+#define SADC_BATDAT (SADC_BASE + 0x1C) /* ADC PBAT Data Register */
+#define SADC_SADDAT (SADC_BASE + 0x20) /* ADC SADCIN Data Register */
+
+#define REG_SADC_ENA REG8(SADC_ENA)
+#define REG_SADC_CFG REG32(SADC_CFG)
+#define REG_SADC_CTRL REG8(SADC_CTRL)
+#define REG_SADC_STATE REG8(SADC_STATE)
+#define REG_SADC_SAMETIME REG16(SADC_SAMETIME)
+#define REG_SADC_WAITTIME REG16(SADC_WAITTIME)
+#define REG_SADC_TSDAT REG32(SADC_TSDAT)
+#define REG_SADC_BATDAT REG16(SADC_BATDAT)
+#define REG_SADC_SADDAT REG16(SADC_SADDAT)
+
+/* ADC Enable Register */
+#define SADC_ENA_ADEN (1 << 7) /* Touch Screen Enable */
+#define SADC_ENA_TSEN (1 << 2) /* Touch Screen Enable */
+#define SADC_ENA_PBATEN (1 << 1) /* PBAT Enable */
+#define SADC_ENA_SADCINEN (1 << 0) /* SADCIN Enable */
+
+/* ADC Configure Register */
+#define SADC_CFG_CLKOUT_NUM_BIT 16
+#define SADC_CFG_CLKOUT_NUM_MASK (0x7 << SADC_CFG_CLKOUT_NUM_BIT)
+#define SADC_CFG_TS_DMA (1 << 15) /* Touch Screen DMA Enable */
+#define SADC_CFG_XYZ_BIT 13 /* XYZ selection */
+#define SADC_CFG_XYZ_MASK (0x3 << SADC_CFG_XYZ_BIT)
+ #define SADC_CFG_XY (0 << SADC_CFG_XYZ_BIT)
+ #define SADC_CFG_XYZ (1 << SADC_CFG_XYZ_BIT)
+ #define SADC_CFG_XYZ1Z2 (2 << SADC_CFG_XYZ_BIT)
+#define SADC_CFG_SNUM_BIT 10 /* Sample Number */
+#define SADC_CFG_SNUM_MASK (0x7 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_1 (0x0 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_2 (0x1 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_3 (0x2 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_4 (0x3 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_5 (0x4 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_6 (0x5 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_8 (0x6 << SADC_CFG_SNUM_BIT)
+ #define SADC_CFG_SNUM_9 (0x7 << SADC_CFG_SNUM_BIT)
+#define SADC_CFG_CLKDIV_BIT 5 /* AD Converter frequency clock divider */
+#define SADC_CFG_CLKDIV_MASK (0x1f << SADC_CFG_CLKDIV_BIT)
+#define SADC_CFG_PBAT_HIGH (0 << 4) /* PBAT >= 2.5V */
+#define SADC_CFG_PBAT_LOW (1 << 4) /* PBAT < 2.5V */
+#define SADC_CFG_CMD_BIT 0 /* ADC Command */
+#define SADC_CFG_CMD_MASK (0xf << SADC_CFG_CMD_BIT)
+ #define SADC_CFG_CMD_X_SE (0x0 << SADC_CFG_CMD_BIT) /* X Single-End */
+ #define SADC_CFG_CMD_Y_SE (0x1 << SADC_CFG_CMD_BIT) /* Y Single-End */
+ #define SADC_CFG_CMD_X_DIFF (0x2 << SADC_CFG_CMD_BIT) /* X Differential */
+ #define SADC_CFG_CMD_Y_DIFF (0x3 << SADC_CFG_CMD_BIT) /* Y Differential */
+ #define SADC_CFG_CMD_Z1_DIFF (0x4 << SADC_CFG_CMD_BIT) /* Z1 Differential */
+ #define SADC_CFG_CMD_Z2_DIFF (0x5 << SADC_CFG_CMD_BIT) /* Z2 Differential */
+ #define SADC_CFG_CMD_Z3_DIFF (0x6 << SADC_CFG_CMD_BIT) /* Z3 Differential */
+ #define SADC_CFG_CMD_Z4_DIFF (0x7 << SADC_CFG_CMD_BIT) /* Z4 Differential */
+ #define SADC_CFG_CMD_TP_SE (0x8 << SADC_CFG_CMD_BIT) /* Touch Pressure */
+ #define SADC_CFG_CMD_PBATH_SE (0x9 << SADC_CFG_CMD_BIT) /* PBAT >= 2.5V */
+ #define SADC_CFG_CMD_PBATL_SE (0xa << SADC_CFG_CMD_BIT) /* PBAT < 2.5V */
+ #define SADC_CFG_CMD_SADCIN_SE (0xb << SADC_CFG_CMD_BIT) /* Measure SADCIN */
+ #define SADC_CFG_CMD_INT_PEN (0xc << SADC_CFG_CMD_BIT) /* INT_PEN Enable */
+
+/* ADC Control Register */
+#define SADC_CTRL_PENDM (1 << 4) /* Pen Down Interrupt Mask */
+#define SADC_CTRL_PENUM (1 << 3) /* Pen Up Interrupt Mask */
+#define SADC_CTRL_TSRDYM (1 << 2) /* Touch Screen Data Ready Interrupt Mask */
+#define SADC_CTRL_PBATRDYM (1 << 1) /* PBAT Data Ready Interrupt Mask */
+#define SADC_CTRL_SRDYM (1 << 0) /* SADCIN Data Ready Interrupt Mask */
+
+/* ADC Status Register */
+#define SADC_STATE_TSBUSY (1 << 7) /* TS A/D is working */
+#define SADC_STATE_PBATBUSY (1 << 6) /* PBAT A/D is working */
+#define SADC_STATE_SBUSY (1 << 5) /* SADCIN A/D is working */
+#define SADC_STATE_PEND (1 << 4) /* Pen Down Interrupt Flag */
+#define SADC_STATE_PENU (1 << 3) /* Pen Up Interrupt Flag */
+#define SADC_STATE_TSRDY (1 << 2) /* Touch Screen Data Ready Interrupt Flag */
+#define SADC_STATE_PBATRDY (1 << 1) /* PBAT Data Ready Interrupt Flag */
+#define SADC_STATE_SRDY (1 << 0) /* SADCIN Data Ready Interrupt Flag */
+
+/* ADC Touch Screen Data Register */
+#define SADC_TSDAT_DATA0_BIT 0
+#define SADC_TSDAT_DATA0_MASK (0xfff << SADC_TSDAT_DATA0_BIT)
+#define SADC_TSDAT_TYPE0 (1 << 15)
+#define SADC_TSDAT_DATA1_BIT 16
+#define SADC_TSDAT_DATA1_MASK (0xfff << SADC_TSDAT_DATA1_BIT)
+#define SADC_TSDAT_TYPE1 (1 << 31)
+
+
+/*************************************************************************
+ * SLCD (Smart LCD Controller)
+ *************************************************************************/
+
+#define SLCD_CFG (SLCD_BASE + 0xA0) /* SLCD Configure Register */
+#define SLCD_CTRL (SLCD_BASE + 0xA4) /* SLCD Control Register */
+#define SLCD_STATE (SLCD_BASE + 0xA8) /* SLCD Status Register */
+#define SLCD_DATA (SLCD_BASE + 0xAC) /* SLCD Data Register */
+#define SLCD_FIFO (SLCD_BASE + 0xB0) /* SLCD FIFO Register */
+
+#define REG_SLCD_CFG REG32(SLCD_CFG)
+#define REG_SLCD_CTRL REG8(SLCD_CTRL)
+#define REG_SLCD_STATE REG8(SLCD_STATE)
+#define REG_SLCD_DATA REG32(SLCD_DATA)
+#define REG_SLCD_FIFO REG32(SLCD_FIFO)
+
+/* SLCD Configure Register */
+#define SLCD_CFG_BURST_BIT 14
+#define SLCD_CFG_BURST_MASK (0x3 << SLCD_CFG_BURST_BIT)
+ #define SLCD_CFG_BURST_4_WORD (0 << SLCD_CFG_BURST_BIT)
+ #define SLCD_CFG_BURST_8_WORD (1 << SLCD_CFG_BURST_BIT)
+#define SLCD_CFG_DWIDTH_BIT 10
+#define SLCD_CFG_DWIDTH_MASK (0x7 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_18 (0 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_16 (1 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_8_x3 (2 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_8_x2 (3 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_8_x1 (4 << SLCD_CFG_DWIDTH_BIT)
+ #define SLCD_CFG_DWIDTH_9_x2 (4 << SLCD_CFG_DWIDTH_BIT)
+#define SLCD_CFG_CWIDTH_16BIT (0 << 8)
+#define SLCD_CFG_CWIDTH_8BIT (1 << 8)
+#define SLCD_CFG_CWIDTH_18BIT (2 << 8)
+#define SLCD_CFG_CS_ACTIVE_LOW (0 << 4)
+#define SLCD_CFG_CS_ACTIVE_HIGH (1 << 4)
+#define SLCD_CFG_RS_CMD_LOW (0 << 3)
+#define SLCD_CFG_RS_CMD_HIGH (1 << 3)
+#define SLCD_CFG_CLK_ACTIVE_FALLING (0 << 1)
+#define SLCD_CFG_CLK_ACTIVE_RISING (1 << 1)
+#define SLCD_CFG_TYPE_PARALLEL (0 << 0)
+#define SLCD_CFG_TYPE_SERIAL (1 << 0)
+
+/* SLCD Control Register */
+#define SLCD_CTRL_DMA_EN (1 << 0)
+
+/* SLCD Status Register */
+#define SLCD_STATE_BUSY (1 << 0)
+
+/* SLCD Data Register */
+#define SLCD_DATA_RS_DATA (0 << 31)
+#define SLCD_DATA_RS_COMMAND (1 << 31)
+
+/* SLCD FIFO Register */
+#define SLCD_FIFO_RS_DATA (0 << 31)
+#define SLCD_FIFO_RS_COMMAND (1 << 31)
+
+
+/*************************************************************************
+ * LCD (LCD Controller)
+ *************************************************************************/
+#define LCD_CFG (LCD_BASE + 0x00) /* LCD Configure Register */
+#define LCD_VSYNC (LCD_BASE + 0x04) /* Vertical Synchronize Register */
+#define LCD_HSYNC (LCD_BASE + 0x08) /* Horizontal Synchronize Register */
+#define LCD_VAT (LCD_BASE + 0x0c) /* Virtual Area Setting Register */
+#define LCD_DAH (LCD_BASE + 0x10) /* Display Area Horizontal Start/End Point */
+#define LCD_DAV (LCD_BASE + 0x14) /* Display Area Vertical Start/End Point */
+#define LCD_PS (LCD_BASE + 0x18) /* PS Signal Setting */
+#define LCD_CLS (LCD_BASE + 0x1c) /* CLS Signal Setting */
+#define LCD_SPL (LCD_BASE + 0x20) /* SPL Signal Setting */
+#define LCD_REV (LCD_BASE + 0x24) /* REV Signal Setting */
+#define LCD_CTRL (LCD_BASE + 0x30) /* LCD Control Register */
+#define LCD_STATE (LCD_BASE + 0x34) /* LCD Status Register */
+#define LCD_IID (LCD_BASE + 0x38) /* Interrupt ID Register */
+#define LCD_DA0 (LCD_BASE + 0x40) /* Descriptor Address Register 0 */
+#define LCD_SA0 (LCD_BASE + 0x44) /* Source Address Register 0 */
+#define LCD_FID0 (LCD_BASE + 0x48) /* Frame ID Register 0 */
+#define LCD_CMD0 (LCD_BASE + 0x4c) /* DMA Command Register 0 */
+#define LCD_DA1 (LCD_BASE + 0x50) /* Descriptor Address Register 1 */
+#define LCD_SA1 (LCD_BASE + 0x54) /* Source Address Register 1 */
+#define LCD_FID1 (LCD_BASE + 0x58) /* Frame ID Register 1 */
+#define LCD_CMD1 (LCD_BASE + 0x5c) /* DMA Command Register 1 */
+
+#define REG_LCD_CFG REG32(LCD_CFG)
+#define REG_LCD_VSYNC REG32(LCD_VSYNC)
+#define REG_LCD_HSYNC REG32(LCD_HSYNC)
+#define REG_LCD_VAT REG32(LCD_VAT)
+#define REG_LCD_DAH REG32(LCD_DAH)
+#define REG_LCD_DAV REG32(LCD_DAV)
+#define REG_LCD_PS REG32(LCD_PS)
+#define REG_LCD_CLS REG32(LCD_CLS)
+#define REG_LCD_SPL REG32(LCD_SPL)
+#define REG_LCD_REV REG32(LCD_REV)
+#define REG_LCD_CTRL REG32(LCD_CTRL)
+#define REG_LCD_STATE REG32(LCD_STATE)
+#define REG_LCD_IID REG32(LCD_IID)
+#define REG_LCD_DA0 REG32(LCD_DA0)
+#define REG_LCD_SA0 REG32(LCD_SA0)
+#define REG_LCD_FID0 REG32(LCD_FID0)
+#define REG_LCD_CMD0 REG32(LCD_CMD0)
+#define REG_LCD_DA1 REG32(LCD_DA1)
+#define REG_LCD_SA1 REG32(LCD_SA1)
+#define REG_LCD_FID1 REG32(LCD_FID1)
+#define REG_LCD_CMD1 REG32(LCD_CMD1)
+
+/* LCD Configure Register */
+#define LCD_CFG_LCDPIN_BIT 31 /* LCD pins selection */
+#define LCD_CFG_LCDPIN_MASK (0x1 << LCD_CFG_LCDPIN_BIT)
+ #define LCD_CFG_LCDPIN_LCD (0x0 << LCD_CFG_LCDPIN_BIT)
+ #define LCD_CFG_LCDPIN_SLCD (0x1 << LCD_CFG_LCDPIN_BIT)
+#define LCD_CFG_PSM (1 << 23) /* PS signal mode */
+#define LCD_CFG_CLSM (1 << 22) /* CLS signal mode */
+#define LCD_CFG_SPLM (1 << 21) /* SPL signal mode */
+#define LCD_CFG_REVM (1 << 20) /* REV signal mode */
+#define LCD_CFG_HSYNM (1 << 19) /* HSYNC signal mode */
+#define LCD_CFG_PCLKM (1 << 18) /* PCLK signal mode */
+#define LCD_CFG_INVDAT (1 << 17) /* Inverse output data */
+#define LCD_CFG_SYNDIR_IN (1 << 16) /* VSYNC&HSYNC direction */
+#define LCD_CFG_PSP (1 << 15) /* PS pin reset state */
+#define LCD_CFG_CLSP (1 << 14) /* CLS pin reset state */
+#define LCD_CFG_SPLP (1 << 13) /* SPL pin reset state */
+#define LCD_CFG_REVP (1 << 12) /* REV pin reset state */
+#define LCD_CFG_HSP (1 << 11) /* HSYNC pority:0-active high,1-active low */
+#define LCD_CFG_PCP (1 << 10) /* PCLK pority:0-rising,1-falling */
+#define LCD_CFG_DEP (1 << 9) /* DE pority:0-active high,1-active low */
+#define LCD_CFG_VSP (1 << 8) /* VSYNC pority:0-rising,1-falling */
+#define LCD_CFG_PDW_BIT 4 /* STN pins utilization */
+#define LCD_CFG_PDW_MASK (0x3 << LCD_DEV_PDW_BIT)
+#define LCD_CFG_PDW_1 (0 << LCD_CFG_PDW_BIT) /* LCD_D[0] */
+ #define LCD_CFG_PDW_2 (1 << LCD_CFG_PDW_BIT) /* LCD_D[0:1] */
+ #define LCD_CFG_PDW_4 (2 << LCD_CFG_PDW_BIT) /* LCD_D[0:3]/LCD_D[8:11] */
+ #define LCD_CFG_PDW_8 (3 << LCD_CFG_PDW_BIT) /* LCD_D[0:7]/LCD_D[8:15] */
+#define LCD_CFG_MODE_BIT 0 /* Display Device Mode Select */
+#define LCD_CFG_MODE_MASK (0x0f << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_GENERIC_TFT (0 << LCD_CFG_MODE_BIT) /* 16,18 bit TFT */
+ #define LCD_CFG_MODE_SPECIAL_TFT_1 (1 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SPECIAL_TFT_2 (2 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SPECIAL_TFT_3 (3 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_NONINTER_CCIR656 (4 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_INTER_CCIR656 (5 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SINGLE_CSTN (8 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SINGLE_MSTN (9 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_DUAL_CSTN (10 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_DUAL_MSTN (11 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SERIAL_TFT (12 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_GENERIC_18BIT_TFT (13 << LCD_CFG_MODE_BIT)
+ /* JZ47XX defines */
+ #define LCD_CFG_MODE_SHARP_HR (1 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_CASIO_TFT (2 << LCD_CFG_MODE_BIT)
+ #define LCD_CFG_MODE_SAMSUNG_ALPHA (3 << LCD_CFG_MODE_BIT)
+
+
+
+/* Vertical Synchronize Register */
+#define LCD_VSYNC_VPS_BIT 16 /* VSYNC pulse start in line clock, fixed to 0 */
+#define LCD_VSYNC_VPS_MASK (0xffff << LCD_VSYNC_VPS_BIT)
+#define LCD_VSYNC_VPE_BIT 0 /* VSYNC pulse end in line clock */
+#define LCD_VSYNC_VPE_MASK (0xffff << LCD_VSYNC_VPS_BIT)
+
+/* Horizontal Synchronize Register */
+#define LCD_HSYNC_HPS_BIT 16 /* HSYNC pulse start position in dot clock */
+#define LCD_HSYNC_HPS_MASK (0xffff << LCD_HSYNC_HPS_BIT)
+#define LCD_HSYNC_HPE_BIT 0 /* HSYNC pulse end position in dot clock */
+#define LCD_HSYNC_HPE_MASK (0xffff << LCD_HSYNC_HPE_BIT)
+
+/* Virtual Area Setting Register */
+#define LCD_VAT_HT_BIT 16 /* Horizontal Total size in dot clock */
+#define LCD_VAT_HT_MASK (0xffff << LCD_VAT_HT_BIT)
+#define LCD_VAT_VT_BIT 0 /* Vertical Total size in dot clock */
+#define LCD_VAT_VT_MASK (0xffff << LCD_VAT_VT_BIT)
+
+/* Display Area Horizontal Start/End Point Register */
+#define LCD_DAH_HDS_BIT 16 /* Horizontal display area start in dot clock */
+#define LCD_DAH_HDS_MASK (0xffff << LCD_DAH_HDS_BIT)
+#define LCD_DAH_HDE_BIT 0 /* Horizontal display area end in dot clock */
+#define LCD_DAH_HDE_MASK (0xffff << LCD_DAH_HDE_BIT)
+
+/* Display Area Vertical Start/End Point Register */
+#define LCD_DAV_VDS_BIT 16 /* Vertical display area start in line clock */
+#define LCD_DAV_VDS_MASK (0xffff << LCD_DAV_VDS_BIT)
+#define LCD_DAV_VDE_BIT 0 /* Vertical display area end in line clock */
+#define LCD_DAV_VDE_MASK (0xffff << LCD_DAV_VDE_BIT)
+
+/* PS Signal Setting */
+#define LCD_PS_PSS_BIT 16 /* PS signal start position in dot clock */
+#define LCD_PS_PSS_MASK (0xffff << LCD_PS_PSS_BIT)
+#define LCD_PS_PSE_BIT 0 /* PS signal end position in dot clock */
+#define LCD_PS_PSE_MASK (0xffff << LCD_PS_PSE_BIT)
+
+/* CLS Signal Setting */
+#define LCD_CLS_CLSS_BIT 16 /* CLS signal start position in dot clock */
+#define LCD_CLS_CLSS_MASK (0xffff << LCD_CLS_CLSS_BIT)
+#define LCD_CLS_CLSE_BIT 0 /* CLS signal end position in dot clock */
+#define LCD_CLS_CLSE_MASK (0xffff << LCD_CLS_CLSE_BIT)
+
+/* SPL Signal Setting */
+#define LCD_SPL_SPLS_BIT 16 /* SPL signal start position in dot clock */
+#define LCD_SPL_SPLS_MASK (0xffff << LCD_SPL_SPLS_BIT)
+#define LCD_SPL_SPLE_BIT 0 /* SPL signal end position in dot clock */
+#define LCD_SPL_SPLE_MASK (0xffff << LCD_SPL_SPLE_BIT)
+
+/* REV Signal Setting */
+#define LCD_REV_REVS_BIT 16 /* REV signal start position in dot clock */
+#define LCD_REV_REVS_MASK (0xffff << LCD_REV_REVS_BIT)
+
+/* LCD Control Register */
+#define LCD_CTRL_BST_BIT 28 /* Burst Length Selection */
+#define LCD_CTRL_BST_MASK (0x03 << LCD_CTRL_BST_BIT)
+ #define LCD_CTRL_BST_4 (0 << LCD_CTRL_BST_BIT) /* 4-word */
+ #define LCD_CTRL_BST_8 (1 << LCD_CTRL_BST_BIT) /* 8-word */
+ #define LCD_CTRL_BST_16 (2 << LCD_CTRL_BST_BIT) /* 16-word */
+#define LCD_CTRL_RGB565 (0 << 27) /* RGB565 mode */
+#define LCD_CTRL_RGB555 (1 << 27) /* RGB555 mode */
+#define LCD_CTRL_OFUP (1 << 26) /* Output FIFO underrun protection enable */
+#define LCD_CTRL_FRC_BIT 24 /* STN FRC Algorithm Selection */
+#define LCD_CTRL_FRC_MASK (0x03 << LCD_CTRL_FRC_BIT)
+ #define LCD_CTRL_FRC_16 (0 << LCD_CTRL_FRC_BIT) /* 16 grayscale */
+ #define LCD_CTRL_FRC_4 (1 << LCD_CTRL_FRC_BIT) /* 4 grayscale */
+ #define LCD_CTRL_FRC_2 (2 << LCD_CTRL_FRC_BIT) /* 2 grayscale */
+#define LCD_CTRL_PDD_BIT 16 /* Load Palette Delay Counter */
+#define LCD_CTRL_PDD_MASK (0xff << LCD_CTRL_PDD_BIT)
+#define LCD_CTRL_EOFM (1 << 13) /* EOF interrupt mask */
+#define LCD_CTRL_SOFM (1 << 12) /* SOF interrupt mask */
+#define LCD_CTRL_OFUM (1 << 11) /* Output FIFO underrun interrupt mask */
+#define LCD_CTRL_IFUM0 (1 << 10) /* Input FIFO 0 underrun interrupt mask */
+#define LCD_CTRL_IFUM1 (1 << 9) /* Input FIFO 1 underrun interrupt mask */
+#define LCD_CTRL_LDDM (1 << 8) /* LCD disable done interrupt mask */
+#define LCD_CTRL_QDM (1 << 7) /* LCD quick disable done interrupt mask */
+#define LCD_CTRL_BEDN (1 << 6) /* Endian selection */
+#define LCD_CTRL_PEDN (1 << 5) /* Endian in byte:0-msb first, 1-lsb first */
+#define LCD_CTRL_DIS (1 << 4) /* Disable indicate bit */
+#define LCD_CTRL_ENA (1 << 3) /* LCD enable bit */
+#define LCD_CTRL_BPP_BIT 0 /* Bits Per Pixel */
+#define LCD_CTRL_BPP_MASK (0x07 << LCD_CTRL_BPP_BIT)
+ #define LCD_CTRL_BPP_1 (0 << LCD_CTRL_BPP_BIT) /* 1 bpp */
+ #define LCD_CTRL_BPP_2 (1 << LCD_CTRL_BPP_BIT) /* 2 bpp */
+ #define LCD_CTRL_BPP_4 (2 << LCD_CTRL_BPP_BIT) /* 4 bpp */
+ #define LCD_CTRL_BPP_8 (3 << LCD_CTRL_BPP_BIT) /* 8 bpp */
+ #define LCD_CTRL_BPP_16 (4 << LCD_CTRL_BPP_BIT) /* 15/16 bpp */
+ #define LCD_CTRL_BPP_18_24 (5 << LCD_CTRL_BPP_BIT) /* 18/24/32 bpp */
+
+/* LCD Status Register */
+#define LCD_STATE_QD (1 << 7) /* Quick Disable Done */
+#define LCD_STATE_EOF (1 << 5) /* EOF Flag */
+#define LCD_STATE_SOF (1 << 4) /* SOF Flag */
+#define LCD_STATE_OFU (1 << 3) /* Output FIFO Underrun */
+#define LCD_STATE_IFU0 (1 << 2) /* Input FIFO 0 Underrun */
+#define LCD_STATE_IFU1 (1 << 1) /* Input FIFO 1 Underrun */
+#define LCD_STATE_LDD (1 << 0) /* LCD Disabled */
+
+/* DMA Command Register */
+#define LCD_CMD_SOFINT (1 << 31)
+#define LCD_CMD_EOFINT (1 << 30)
+#define LCD_CMD_PAL (1 << 28)
+#define LCD_CMD_LEN_BIT 0
+#define LCD_CMD_LEN_MASK (0xffffff << LCD_CMD_LEN_BIT)
+
+
+/*************************************************************************
+ * USB Device
+ *************************************************************************/
+#define USB_BASE UDC_BASE
+
+#define USB_REG_FADDR (USB_BASE + 0x00) /* Function Address 8-bit */
+#define USB_REG_POWER (USB_BASE + 0x01) /* Power Managemetn 8-bit */
+#define USB_REG_INTRIN (USB_BASE + 0x02) /* Interrupt IN 16-bit */
+#define USB_REG_INTROUT (USB_BASE + 0x04) /* Interrupt OUT 16-bit */
+#define USB_REG_INTRINE (USB_BASE + 0x06) /* Intr IN enable 16-bit */
+#define USB_REG_INTROUTE (USB_BASE + 0x08) /* Intr OUT enable 16-bit */
+#define USB_REG_INTRUSB (USB_BASE + 0x0a) /* Interrupt USB 8-bit */
+#define USB_REG_INTRUSBE (USB_BASE + 0x0b) /* Interrupt USB Enable 8-bit */
+#define USB_REG_FRAME (USB_BASE + 0x0c) /* Frame number 16-bit */
+#define USB_REG_INDEX (USB_BASE + 0x0e) /* Index register 8-bit */
+#define USB_REG_TESTMODE (USB_BASE + 0x0f) /* USB test mode 8-bit */
+
+#define USB_REG_CSR0 (USB_BASE + 0x12) /* EP0 CSR 8-bit */
+#define USB_REG_INMAXP (USB_BASE + 0x10) /* EP1-2 IN Max Pkt Size 16-bit */
+#define USB_REG_INCSR (USB_BASE + 0x12) /* EP1-2 IN CSR LSB 8/16bit */
+#define USB_REG_INCSRH (USB_BASE + 0x13) /* EP1-2 IN CSR MSB 8-bit */
+#define USB_REG_OUTMAXP (USB_BASE + 0x14) /* EP1 OUT Max Pkt Size 16-bit */
+#define USB_REG_OUTCSR (USB_BASE + 0x16) /* EP1 OUT CSR LSB 8/16bit */
+#define USB_REG_OUTCSRH (USB_BASE + 0x17) /* EP1 OUT CSR MSB 8-bit */
+#define USB_REG_OUTCOUNT (USB_BASE + 0x18) /* bytes in EP0/1 OUT FIFO 16-bit */
+
+#define USB_FIFO_EP0 (USB_BASE + 0x20)
+#define USB_FIFO_EP1 (USB_BASE + 0x24)
+#define USB_FIFO_EP2 (USB_BASE + 0x28)
+
+#define USB_REG_EPINFO (USB_BASE + 0x78) /* Endpoint information */
+#define USB_REG_RAMINFO (USB_BASE + 0x79) /* RAM information */
+
+#define USB_REG_INTR (USB_BASE + 0x200) /* DMA pending interrupts */
+#define USB_REG_CNTL1 (USB_BASE + 0x204) /* DMA channel 1 control */
+#define USB_REG_ADDR1 (USB_BASE + 0x208) /* DMA channel 1 AHB memory addr */
+#define USB_REG_COUNT1 (USB_BASE + 0x20c) /* DMA channel 1 byte count */
+#define USB_REG_CNTL2 (USB_BASE + 0x214) /* DMA channel 2 control */
+#define USB_REG_ADDR2 (USB_BASE + 0x218) /* DMA channel 2 AHB memory addr */
+#define USB_REG_COUNT2 (USB_BASE + 0x21c) /* DMA channel 2 byte count */
+
+
+/* Power register bit masks */
+#define USB_POWER_SUSPENDM 0x01
+#define USB_POWER_RESUME 0x04
+#define USB_POWER_HSMODE 0x10
+#define USB_POWER_HSENAB 0x20
+#define USB_POWER_SOFTCONN 0x40
+
+/* Interrupt register bit masks */
+#define USB_INTR_SUSPEND 0x01
+#define USB_INTR_RESUME 0x02
+#define USB_INTR_RESET 0x04
+
+#define USB_INTR_EP0 0x0001
+#define USB_INTR_INEP1 0x0002
+#define USB_INTR_INEP2 0x0004
+#define USB_INTR_OUTEP1 0x0002
+
+/* CSR0 bit masks */
+#define USB_CSR0_OUTPKTRDY 0x01
+#define USB_CSR0_INPKTRDY 0x02
+#define USB_CSR0_SENTSTALL 0x04
+#define USB_CSR0_DATAEND 0x08
+#define USB_CSR0_SETUPEND 0x10
+#define USB_CSR0_SENDSTALL 0x20
+#define USB_CSR0_SVDOUTPKTRDY 0x40
+#define USB_CSR0_SVDSETUPEND 0x80
+
+/* Endpoint CSR register bits */
+#define USB_INCSRH_AUTOSET 0x80
+#define USB_INCSRH_ISO 0x40
+#define USB_INCSRH_MODE 0x20
+#define USB_INCSRH_DMAREQENAB 0x10
+#define USB_INCSRH_DMAREQMODE 0x04
+#define USB_INCSR_CDT 0x40
+#define USB_INCSR_SENTSTALL 0x20
+#define USB_INCSR_SENDSTALL 0x10
+#define USB_INCSR_FF 0x08
+#define USB_INCSR_UNDERRUN 0x04
+#define USB_INCSR_FFNOTEMPT 0x02
+#define USB_INCSR_INPKTRDY 0x01
+#define USB_OUTCSRH_AUTOCLR 0x80
+#define USB_OUTCSRH_ISO 0x40
+#define USB_OUTCSRH_DMAREQENAB 0x20
+#define USB_OUTCSRH_DNYT 0x10
+#define USB_OUTCSRH_DMAREQMODE 0x08
+#define USB_OUTCSR_CDT 0x80
+#define USB_OUTCSR_SENTSTALL 0x40
+#define USB_OUTCSR_SENDSTALL 0x20
+#define USB_OUTCSR_FF 0x10
+#define USB_OUTCSR_DATAERR 0x08
+#define USB_OUTCSR_OVERRUN 0x04
+#define USB_OUTCSR_FFFULL 0x02
+#define USB_OUTCSR_OUTPKTRDY 0x01
+
+/* Testmode register bits */
+#define USB_TEST_SE0NAK 0x01
+#define USB_TEST_J 0x02
+#define USB_TEST_K 0x04
+#define USB_TEST_PACKET 0x08
+
+/* DMA control bits */
+#define USB_CNTL_ENA 0x01
+#define USB_CNTL_DIR_IN 0x02
+#define USB_CNTL_MODE_1 0x04
+#define USB_CNTL_INTR_EN 0x08
+#define USB_CNTL_EP(n) ((n) << 4)
+#define USB_CNTL_BURST_0 (0 << 9)
+#define USB_CNTL_BURST_4 (1 << 9)
+#define USB_CNTL_BURST_8 (2 << 9)
+#define USB_CNTL_BURST_16 (3 << 9)
+
+
+
+/* Module Operation Definitions */
+#ifndef __ASSEMBLY__
+
+
+/* GPIO Pins Description */
+/* PORT 0: */
+/* PIN/BIT N FUNC0 FUNC1 */
+/* 0 D0 - */
+/* 1 D1 - */
+/* 2 D2 - */
+/* 3 D3 - */
+/* 4 D4 - */
+/* 5 D5 - */
+/* 6 D6 - */
+/* 7 D7 - */
+/* 8 D8 - */
+/* 9 D9 - */
+/* 10 D10 - */
+/* 11 D11 - */
+/* 12 D12 - */
+/* 13 D13 - */
+/* 14 D14 - */
+/* 15 D15 - */
+/* 16 D16 - */
+/* 17 D17 - */
+/* 18 D18 - */
+/* 19 D19 - */
+/* 20 D20 - */
+/* 21 D21 - */
+/* 22 D22 - */
+/* 23 D23 - */
+/* 24 D24 - */
+/* 25 D25 - */
+/* 26 D26 - */
+/* 27 D27 - */
+/* 28 D28 - */
+/* 29 D29 - */
+/* 30 D30 - */
+/* 31 D31 - */
+/*------------------------------------------------------ */
+/* PORT 1: */
+/* */
+/* PIN/BIT N FUNC0 FUNC1 */
+/* 0 A0 - */
+/* 1 A1 - */
+/* 2 A2 - */
+/* 3 A3 - */
+/* 4 A4 - */
+/* 5 A5 - */
+/* 6 A6 - */
+/* 7 A7 - */
+/* 8 A8 - */
+/* 9 A9 - */
+/* 10 A10 - */
+/* 11 A11 - */
+/* 12 A12 - */
+/* 13 A13 - */
+/* 14 A14 - */
+/* 15 A15/CL - */
+/* 16 A16/AL - */
+/* 17 LCD_CLS A21 */
+/* 18 LCD_SPL A22 */
+/* 19 DCS# - */
+/* 20 RAS# - */
+/* 21 CAS# - */
+/* 22 RDWE#/BUFD# - */
+/* 23 CKE - */
+/* 24 CKO - */
+/* 25 CS1# - */
+/* 26 CS2# - */
+/* 27 CS3# - */
+/* 28 CS4# - */
+/* 29 RD# - */
+/* 30 WR# - */
+/* 31 WE0# - */
+/* Note: PIN15&16 are CL&AL when connecting to NAND flash. */
+/*------------------------------------------------------ */
+/* PORT 2: */
+/* */
+/* PIN/BIT N FUNC0 FUNC1 */
+/* 0 LCD_D0 - */
+/* 1 LCD_D1 - */
+/* 2 LCD_D2 - */
+/* 3 LCD_D3 - */
+/* 4 LCD_D4 - */
+/* 5 LCD_D5 - */
+/* 6 LCD_D6 - */
+/* 7 LCD_D7 - */
+/* 8 LCD_D8 - */
+/* 9 LCD_D9 - */
+/* 10 LCD_D10 - */
+/* 11 LCD_D11 - */
+/* 12 LCD_D12 - */
+/* 13 LCD_D13 - */
+/* 14 LCD_D14 - */
+/* 15 LCD_D15 - */
+/* 16 LCD_D16 - */
+/* 17 LCD_D17 - */
+/* 18 LCD_PCLK - */
+/* 19 LCD_HSYNC - */
+/* 20 LCD_VSYNC - */
+/* 21 LCD_DE - */
+/* 22 LCD_PS A19 */
+/* 23 LCD_REV A20 */
+/* 24 WE1# - */
+/* 25 WE2# - */
+/* 26 WE3# - */
+/* 27 WAIT# - */
+/* 28 FRE# - */
+/* 29 FWE# - */
+/* 30(NOTE:FRB#) - - */
+/* 31 - - */
+/* NOTE(1): PIN30 is used for FRB# when connecting to NAND flash. */
+/*------------------------------------------------------ */
+/* PORT 3: */
+/* */
+/* PIN/BIT N FUNC0 FUNC1 */
+/* 0 CIM_D0 - */
+/* 1 CIM_D1 - */
+/* 2 CIM_D2 - */
+/* 3 CIM_D3 - */
+/* 4 CIM_D4 - */
+/* 5 CIM_D5 - */
+/* 6 CIM_D6 - */
+/* 7 CIM_D7 - */
+/* 8 MSC_CMD - */
+/* 9 MSC_CLK - */
+/* 10 MSC_D0 - */
+/* 11 MSC_D1 - */
+/* 12 MSC_D2 - */
+/* 13 MSC_D3 - */
+/* 14 CIM_MCLK - */
+/* 15 CIM_PCLK - */
+/* 16 CIM_VSYNC - */
+/* 17 CIM_HSYNC - */
+/* 18 SSI_CLK SCLK_RSTN */
+/* 19 SSI_CE0# BIT_CLK(AIC) */
+/* 20 SSI_DT SDATA_OUT(AIC) */
+/* 21 SSI_DR SDATA_IN(AIC) */
+/* 22 SSI_CE1#&GPC SYNC(AIC) */
+/* 23 PWM0 I2C_SDA */
+/* 24 PWM1 I2C_SCK */
+/* 25 PWM2 UART0_TxD */
+/* 26 PWM3 UART0_RxD */
+/* 27 PWM4 A17 */
+/* 28 PWM5 A18 */
+/* 29 - - */
+/* 30 PWM6 UART0_CTS/UART1_RxD */
+/* 31 PWM7 UART0_RTS/UART1_TxD */
+/*
+ * p is the port number (0,1,2,3)
+ * o is the pin offset (0-31) inside the port
+ * n is the absolute number of a pin (0-127), regardless of the port
+ */
+
+/* Function Pins Mode */
+
+#define __gpio_as_func0(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXFUNS(p) = (1 << o); \
+ REG_GPIO_PXSELC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_as_func1(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXFUNS(p) = (1 << o); \
+ REG_GPIO_PXSELS(p) = (1 << o); \
+} while (0)
+
+/*
+ * D0 ~ D31, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
+ * RDWE#, CKO#, WE0#, WE1#, WE2#, WE3#
+ */
+#define __gpio_as_sdram_32bit() \
+do { \
+ REG_GPIO_PXFUNS(0) = 0xffffffff; \
+ REG_GPIO_PXSELC(0) = 0xffffffff; \
+ REG_GPIO_PXPES(0) = 0xffffffff; \
+ REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
+ REG_GPIO_PXSELC(1) = 0x81f9ffff; \
+ REG_GPIO_PXPES(1) = 0x81f9ffff; \
+ REG_GPIO_PXFUNS(2) = 0x07000000; \
+ REG_GPIO_PXSELC(2) = 0x07000000; \
+ REG_GPIO_PXPES(2) = 0x07000000; \
+} while (0)
+
+/*
+ * D0 ~ D15, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
+ * RDWE#, CKO#, WE0#, WE1#
+ */
+#define __gpio_as_sdram_16bit_4720() \
+do { \
+ REG_GPIO_PXFUNS(0) = 0x5442bfaa; \
+ REG_GPIO_PXSELC(0) = 0x5442bfaa; \
+ REG_GPIO_PXPES(0) = 0x5442bfaa; \
+ REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
+ REG_GPIO_PXSELC(1) = 0x81f9ffff; \
+ REG_GPIO_PXPES(1) = 0x81f9ffff; \
+ REG_GPIO_PXFUNS(2) = 0x01000000; \
+ REG_GPIO_PXSELC(2) = 0x01000000; \
+ REG_GPIO_PXPES(2) = 0x01000000; \
+} while (0)
+
+/*
+ * D0 ~ D15, A0 ~ A16, DCS#, RAS#, CAS#, CKE#,
+ * RDWE#, CKO#, WE0#, WE1#
+ */
+#define __gpio_as_sdram_16bit_4725() \
+do { \
+ REG_GPIO_PXFUNS(0) = 0x0000ffff; \
+ REG_GPIO_PXSELC(0) = 0x0000ffff; \
+ REG_GPIO_PXPES(0) = 0x0000ffff; \
+ REG_GPIO_PXFUNS(1) = 0x81f9ffff; \
+ REG_GPIO_PXSELC(1) = 0x81f9ffff; \
+ REG_GPIO_PXPES(1) = 0x81f9ffff; \
+ REG_GPIO_PXFUNS(2) = 0x01000000; \
+ REG_GPIO_PXSELC(2) = 0x01000000; \
+ REG_GPIO_PXPES(2) = 0x01000000; \
+} while (0)
+
+
+/*
+ * CS1#, CLE, ALE, FRE#, FWE#, FRB#, RDWE#/BUFD#
+ */
+#define __gpio_as_nand() \
+do { \
+ REG_GPIO_PXFUNS(1) = 0x02018000; \
+ REG_GPIO_PXSELC(1) = 0x02018000; \
+ REG_GPIO_PXPES(1) = 0x02018000; \
+ REG_GPIO_PXFUNS(2) = 0x30000000; \
+ REG_GPIO_PXSELC(2) = 0x30000000; \
+ REG_GPIO_PXPES(2) = 0x30000000; \
+ REG_GPIO_PXFUNC(2) = 0x40000000; \
+ REG_GPIO_PXSELC(2) = 0x40000000; \
+ REG_GPIO_PXDIRC(2) = 0x40000000; \
+ REG_GPIO_PXPES(2) = 0x40000000; \
+ REG_GPIO_PXFUNS(1) = 0x00400000; \
+ REG_GPIO_PXSELC(1) = 0x00400000; \
+} while (0)
+
+/*
+ * CS4#, RD#, WR#, WAIT#, A0 ~ A22, D0 ~ D7
+ */
+#define __gpio_as_nor_8bit() \
+do { \
+ REG_GPIO_PXFUNS(0) = 0x000000ff; \
+ REG_GPIO_PXSELC(0) = 0x000000ff; \
+ REG_GPIO_PXPES(0) = 0x000000ff; \
+ REG_GPIO_PXFUNS(1) = 0x7041ffff; \
+ REG_GPIO_PXSELC(1) = 0x7041ffff; \
+ REG_GPIO_PXPES(1) = 0x7041ffff; \
+ REG_GPIO_PXFUNS(1) = 0x00060000; \
+ REG_GPIO_PXSELS(1) = 0x00060000; \
+ REG_GPIO_PXPES(1) = 0x00060000; \
+ REG_GPIO_PXFUNS(2) = 0x08000000; \
+ REG_GPIO_PXSELC(2) = 0x08000000; \
+ REG_GPIO_PXPES(2) = 0x08000000; \
+ REG_GPIO_PXFUNS(2) = 0x00c00000; \
+ REG_GPIO_PXSELS(2) = 0x00c00000; \
+ REG_GPIO_PXPES(2) = 0x00c00000; \
+ REG_GPIO_PXFUNS(3) = 0x18000000; \
+ REG_GPIO_PXSELS(3) = 0x18000000; \
+ REG_GPIO_PXPES(3) = 0x18000000; \
+} while (0)
+
+/*
+ * CS4#, RD#, WR#, WAIT#, A0 ~ A22, D0 ~ D15
+ */
+#define __gpio_as_nor_16bit() \
+do { \
+ REG_GPIO_PXFUNS(0) = 0x0000ffff; \
+ REG_GPIO_PXSELC(0) = 0x0000ffff; \
+ REG_GPIO_PXPES(0) = 0x0000ffff; \
+ REG_GPIO_PXFUNS(1) = 0x7041ffff; \
+ REG_GPIO_PXSELC(1) = 0x7041ffff; \
+ REG_GPIO_PXPES(1) = 0x7041ffff; \
+ REG_GPIO_PXFUNS(1) = 0x00060000; \
+ REG_GPIO_PXSELS(1) = 0x00060000; \
+ REG_GPIO_PXPES(1) = 0x00060000; \
+ REG_GPIO_PXFUNS(2) = 0x08000000; \
+ REG_GPIO_PXSELC(2) = 0x08000000; \
+ REG_GPIO_PXPES(2) = 0x08000000; \
+ REG_GPIO_PXFUNS(2) = 0x00c00000; \
+ REG_GPIO_PXSELS(2) = 0x00c00000; \
+ REG_GPIO_PXPES(2) = 0x00c00000; \
+ REG_GPIO_PXFUNS(3) = 0x18000000; \
+ REG_GPIO_PXSELS(3) = 0x18000000; \
+ REG_GPIO_PXPES(3) = 0x18000000; \
+} while (0)
+
+/*
+ * UART0_TxD, UART_RxD0
+ */
+#define __gpio_as_uart0() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x06000000; \
+ REG_GPIO_PXSELS(3) = 0x06000000; \
+ REG_GPIO_PXPES(3) = 0x06000000; \
+} while (0)
+
+#define __gpio_jtag_to_uart0() \
+do { \
+ REG_GPIO_PXSELS(2) = 0x80000000; \
+} while (0)
+
+/*
+ * UART0_CTS, UART0_RTS
+ */
+#define __gpio_as_ctsrts() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0xc0000000; \
+ REG_GPIO_PXSELS(3) = 0xc0000000; \
+ REG_GPIO_PXTRGC(3) = 0xc0000000; \
+ REG_GPIO_PXPES(3) = 0xc0000000; \
+} while (0)
+
+/*
+ * UART1_TxD, UART1_RxD1
+ */
+#define __gpio_as_uart1() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0xc0000000; \
+ REG_GPIO_PXSELC(3) = 0xc0000000; \
+ REG_GPIO_PXTRGS(3) = 0xc0000000; \
+ REG_GPIO_PXPES(3) = 0xc0000000; \
+} while (0)
+
+/*
+ * LCD_D0~LCD_D15, LCD_PCLK, LCD_HSYNC, LCD_VSYNC, LCD_DE
+ */
+#define __gpio_as_lcd_16bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x003cffff; \
+ REG_GPIO_PXSELC(2) = 0x003cffff; \
+ REG_GPIO_PXPES(2) = 0x003cffff; \
+} while (0)
+
+/*
+ * LCD_D0~LCD_D17, LCD_PCLK, LCD_HSYNC, LCD_VSYNC, LCD_DE
+ */
+#define __gpio_as_lcd_18bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x003fffff; \
+ REG_GPIO_PXSELC(2) = 0x003fffff; \
+ REG_GPIO_PXPES(2) = 0x003fffff; \
+} while (0)
+
+
+/* LCD_D0~LCD_D7, SLCD_RS, SLCD_CS */
+#define __gpio_as_slcd_8bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x001800ff; \
+ REG_GPIO_PXSELC(2) = 0x001800ff; \
+} while (0)
+
+/* LCD_D0~LCD_D7, SLCD_RS, SLCD_CS */
+#define __gpio_as_slcd_9bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x001801ff; \
+ REG_GPIO_PXSELC(2) = 0x001801ff; \
+} while (0)
+
+/* LCD_D0~LCD_D15, SLCD_RS, SLCD_CS */
+#define __gpio_as_slcd_16bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x0018ffff; \
+ REG_GPIO_PXSELC(2) = 0x0018ffff; \
+} while (0)
+
+/* LCD_D0~LCD_D17, SLCD_RS, SLCD_CS */
+#define __gpio_as_slcd_18bit() \
+do { \
+ REG_GPIO_PXFUNS(2) = 0x001bffff; \
+ REG_GPIO_PXSELC(2) = 0x001bffff; \
+} while (0)
+/*
+ * CIM_D0~CIM_D7, CIM_MCLK, CIM_PCLK, CIM_VSYNC, CIM_HSYNC
+ */
+#define __gpio_as_cim() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x0003c0ff; \
+ REG_GPIO_PXSELC(3) = 0x0003c0ff; \
+ REG_GPIO_PXPES(3) = 0x0003c0ff; \
+} while (0)
+
+/*
+ * SDATA_OUT, SDATA_IN, BIT_CLK, SYNC, SCLK_RESET
+ */
+#define __gpio_as_aic() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x007c0000; \
+ REG_GPIO_PXSELS(3) = 0x007c0000; \
+ REG_GPIO_PXPES(3) = 0x007c0000; \
+} while (0)
+
+/*
+ * MSC_CMD, MSC_CLK, MSC_D0 ~ MSC_D3
+ */
+#define __gpio_as_msc() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x00003f00; \
+ REG_GPIO_PXSELC(3) = 0x00003f00; \
+ REG_GPIO_PXPES(3) = 0x00003f00; \
+} while (0)
+
+/*
+ * SSI_CS0, SSI_CLK, SSI_DT, SSI_DR
+ */
+#define __gpio_as_ssi() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x003c0000; \
+ REG_GPIO_PXSELC(3) = 0x003c0000; \
+ REG_GPIO_PXPES(3) = 0x003c0000; \
+} while (0)
+
+/*
+ * I2C_SCK, I2C_SDA
+ */
+#define __gpio_as_i2c() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x01800000; \
+ REG_GPIO_PXSELS(3) = 0x01800000; \
+ REG_GPIO_PXPES(3) = 0x01800000; \
+} while (0)
+
+/*
+ * PWM0
+ */
+#define __gpio_as_pwm0() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x00800000; \
+ REG_GPIO_PXSELC(3) = 0x00800000; \
+ REG_GPIO_PXPES(3) = 0x00800000; \
+} while (0)
+
+/*
+ * PWM1
+ */
+#define __gpio_as_pwm1() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x01000000; \
+ REG_GPIO_PXSELC(3) = 0x01000000; \
+ REG_GPIO_PXPES(3) = 0x01000000; \
+} while (0)
+
+/*
+ * PWM2
+ */
+#define __gpio_as_pwm2() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x02000000; \
+ REG_GPIO_PXSELC(3) = 0x02000000; \
+ REG_GPIO_PXPES(3) = 0x02000000; \
+} while (0)
+
+/*
+ * PWM3
+ */
+#define __gpio_as_pwm3() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x04000000; \
+ REG_GPIO_PXSELC(3) = 0x04000000; \
+ REG_GPIO_PXPES(3) = 0x04000000; \
+} while (0)
+
+/*
+ * PWM4
+ */
+#define __gpio_as_pwm4() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x08000000; \
+ REG_GPIO_PXSELC(3) = 0x08000000; \
+ REG_GPIO_PXPES(3) = 0x08000000; \
+} while (0)
+
+/*
+ * PWM5
+ */
+#define __gpio_as_pwm5() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x10000000; \
+ REG_GPIO_PXSELC(3) = 0x10000000; \
+ REG_GPIO_PXPES(3) = 0x10000000; \
+} while (0)
+
+/*
+ * PWM6
+ */
+#define __gpio_as_pwm6() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x40000000; \
+ REG_GPIO_PXSELC(3) = 0x40000000; \
+ REG_GPIO_PXPES(3) = 0x40000000; \
+} while (0)
+
+/*
+ * PWM7
+ */
+#define __gpio_as_pwm7() \
+do { \
+ REG_GPIO_PXFUNS(3) = 0x80000000; \
+ REG_GPIO_PXSELC(3) = 0x80000000; \
+ REG_GPIO_PXPES(3) = 0x80000000; \
+} while (0)
+
+/*
+ * n = 0 ~ 7
+ */
+#define __gpio_as_pwm(n) __gpio_as_pwm##n()
+
+/* GPIO or Interrupt Mode */
+
+#define __gpio_get_port(p) (REG_GPIO_PXPIN(p))
+
+#define __gpio_port_as_output(p, o) \
+do { \
+ REG_GPIO_PXFUNC(p) = (1 << (o)); \
+ REG_GPIO_PXSELC(p) = (1 << (o)); \
+ REG_GPIO_PXDIRS(p) = (1 << (o)); \
+} while (0)
+
+#define __gpio_port_as_input(p, o) \
+do { \
+ REG_GPIO_PXFUNC(p) = (1 << (o)); \
+ REG_GPIO_PXSELC(p) = (1 << (o)); \
+ REG_GPIO_PXDIRC(p) = (1 << (o)); \
+} while (0)
+
+#define __gpio_as_output(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ __gpio_port_as_output(p, o); \
+} while (0)
+
+#define __gpio_as_input(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ __gpio_port_as_input(p, o); \
+} while (0)
+
+#define __gpio_set_pin(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXDATS(p) = (1 << o); \
+} while (0)
+
+#define __gpio_clear_pin(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXDATC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_get_pin(n) \
+({ \
+ unsigned int p, o, v; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ if (__gpio_get_port(p) & (1 << o)) \
+ v = 1; \
+ else \
+ v = 0; \
+ v; \
+})
+
+#define __gpio_as_irq_high_level(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMS(p) = (1 << o); \
+ REG_GPIO_PXTRGC(p) = (1 << o); \
+ REG_GPIO_PXFUNC(p) = (1 << o); \
+ REG_GPIO_PXSELS(p) = (1 << o); \
+ REG_GPIO_PXDIRS(p) = (1 << o); \
+ REG_GPIO_PXFLGC(p) = (1 << o); \
+ REG_GPIO_PXIMC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_as_irq_low_level(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMS(p) = (1 << o); \
+ REG_GPIO_PXTRGC(p) = (1 << o); \
+ REG_GPIO_PXFUNC(p) = (1 << o); \
+ REG_GPIO_PXSELS(p) = (1 << o); \
+ REG_GPIO_PXDIRC(p) = (1 << o); \
+ REG_GPIO_PXFLGC(p) = (1 << o); \
+ REG_GPIO_PXIMC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_as_irq_rise_edge(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMS(p) = (1 << o); \
+ REG_GPIO_PXTRGS(p) = (1 << o); \
+ REG_GPIO_PXFUNC(p) = (1 << o); \
+ REG_GPIO_PXSELS(p) = (1 << o); \
+ REG_GPIO_PXDIRS(p) = (1 << o); \
+ REG_GPIO_PXFLGC(p) = (1 << o); \
+ REG_GPIO_PXIMC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_as_irq_fall_edge(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMS(p) = (1 << o); \
+ REG_GPIO_PXTRGS(p) = (1 << o); \
+ REG_GPIO_PXFUNC(p) = (1 << o); \
+ REG_GPIO_PXSELS(p) = (1 << o); \
+ REG_GPIO_PXDIRC(p) = (1 << o); \
+ REG_GPIO_PXFLGC(p) = (1 << o); \
+ REG_GPIO_PXIMC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_mask_irq(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMS(p) = (1 << o); \
+} while (0)
+
+#define __gpio_unmask_irq(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXIMC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_ack_irq(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXFLGC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_get_irq() \
+({ \
+ unsigned int p, i, tmp, v = 0; \
+ for (p = 3; p >= 0; p--) { \
+ tmp = REG_GPIO_PXFLG(p); \
+ for (i = 0; i < 32; i++) \
+ if (tmp & (1 << i)) \
+ v = (32*p + i); \
+ } \
+ v; \
+})
+
+#define __gpio_group_irq(n) \
+({ \
+ register int tmp, i; \
+ tmp = REG_GPIO_PXFLG((n)); \
+ for (i=31;i>=0;i--) \
+ if (tmp & (1 << i)) \
+ break; \
+ i; \
+})
+
+#define __gpio_enable_pull(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXPEC(p) = (1 << o); \
+} while (0)
+
+#define __gpio_disable_pull(n) \
+do { \
+ unsigned int p, o; \
+ p = (n) / 32; \
+ o = (n) % 32; \
+ REG_GPIO_PXPES(p) = (1 << o); \
+} while (0)
+
+
+/***************************************************************************
+ * CPM
+ ***************************************************************************/
+#define __cpm_get_pllm() \
+ ((REG_CPM_CPPCR & CPM_CPPCR_PLLM_MASK) >> CPM_CPPCR_PLLM_BIT)
+#define __cpm_get_plln() \
+ ((REG_CPM_CPPCR & CPM_CPPCR_PLLN_MASK) >> CPM_CPPCR_PLLN_BIT)
+#define __cpm_get_pllod() \
+ ((REG_CPM_CPPCR & CPM_CPPCR_PLLOD_MASK) >> CPM_CPPCR_PLLOD_BIT)
+
+#define __cpm_get_cdiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_CDIV_MASK) >> CPM_CPCCR_CDIV_BIT)
+#define __cpm_get_hdiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_HDIV_MASK) >> CPM_CPCCR_HDIV_BIT)
+#define __cpm_get_pdiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_PDIV_MASK) >> CPM_CPCCR_PDIV_BIT)
+#define __cpm_get_mdiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_MDIV_MASK) >> CPM_CPCCR_MDIV_BIT)
+#define __cpm_get_ldiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_LDIV_MASK) >> CPM_CPCCR_LDIV_BIT)
+#define __cpm_get_udiv() \
+ ((REG_CPM_CPCCR & CPM_CPCCR_UDIV_MASK) >> CPM_CPCCR_UDIV_BIT)
+#define __cpm_get_i2sdiv() \
+ ((REG_CPM_I2SCDR & CPM_I2SCDR_I2SDIV_MASK) >> CPM_I2SCDR_I2SDIV_BIT)
+#define __cpm_get_pixdiv() \
+ ((REG_CPM_LPCDR & CPM_LPCDR_PIXDIV_MASK) >> CPM_LPCDR_PIXDIV_BIT)
+#define __cpm_get_mscdiv() \
+ ((REG_CPM_MSCCDR & CPM_MSCCDR_MSCDIV_MASK) >> CPM_MSCCDR_MSCDIV_BIT)
+
+#define __cpm_set_cdiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_CDIV_MASK) | ((v) << (CPM_CPCCR_CDIV_BIT)))
+#define __cpm_set_hdiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_HDIV_MASK) | ((v) << (CPM_CPCCR_HDIV_BIT)))
+#define __cpm_set_pdiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_PDIV_MASK) | ((v) << (CPM_CPCCR_PDIV_BIT)))
+#define __cpm_set_mdiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_MDIV_MASK) | ((v) << (CPM_CPCCR_MDIV_BIT)))
+#define __cpm_set_ldiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_LDIV_MASK) | ((v) << (CPM_CPCCR_LDIV_BIT)))
+#define __cpm_set_udiv(v) \
+ (REG_CPM_CPCCR = (REG_CPM_CPCCR & ~CPM_CPCCR_UDIV_MASK) | ((v) << (CPM_CPCCR_UDIV_BIT)))
+#define __cpm_set_i2sdiv(v) \
+ (REG_CPM_I2SCDR = (REG_CPM_I2SCDR & ~CPM_I2SCDR_I2SDIV_MASK) | ((v) << (CPM_I2SCDR_I2SDIV_BIT)))
+#define __cpm_set_pixdiv(v) \
+ (REG_CPM_LPCDR = (REG_CPM_LPCDR & ~CPM_LPCDR_PIXDIV_MASK) | ((v) << (CPM_LPCDR_PIXDIV_BIT)))
+#define __cpm_set_mscdiv(v) \
+ (REG_CPM_MSCCDR = (REG_CPM_MSCCDR & ~CPM_MSCCDR_MSCDIV_MASK) | ((v) << (CPM_MSCCDR_MSCDIV_BIT)))
+
+#define __cpm_select_i2sclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_I2CS)
+#define __cpm_select_i2sclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_I2CS)
+#define __cpm_enable_cko() (REG_CPM_CPCCR |= CPM_CPCCR_CLKOEN)
+#define __cpm_select_usbclk_exclk() (REG_CPM_CPCCR &= ~CPM_CPCCR_UCS)
+#define __cpm_select_usbclk_pll() (REG_CPM_CPCCR |= CPM_CPCCR_UCS)
+#define __cpm_enable_pll_change() (REG_CPM_CPCCR |= CPM_CPCCR_CE)
+#define __cpm_pllout_direct() (REG_CPM_CPCCR |= CPM_CPCCR_PCS)
+#define __cpm_pllout_div2() (REG_CPM_CPCCR &= ~CPM_CPCCR_PCS)
+
+#define __cpm_pll_is_on() (REG_CPM_CPPCR & CPM_CPPCR_PLLS)
+#define __cpm_pll_bypass() (REG_CPM_CPPCR |= CPM_CPPCR_PLLBP)
+#define __cpm_pll_enable() (REG_CPM_CPPCR |= CPM_CPPCR_PLLEN)
+
+#define __cpm_get_cclk_doze_duty() \
+ ((REG_CPM_LCR & CPM_LCR_DOZE_DUTY_MASK) >> CPM_LCR_DOZE_DUTY_BIT)
+#define __cpm_set_cclk_doze_duty(v) \
+ (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_DOZE_DUTY_MASK) | ((v) << (CPM_LCR_DOZE_DUTY_BIT)))
+
+#define __cpm_doze_mode() (REG_CPM_LCR |= CPM_LCR_DOZE_ON)
+#define __cpm_idle_mode() \
+ (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_IDLE)
+#define __cpm_sleep_mode() \
+ (REG_CPM_LCR = (REG_CPM_LCR & ~CPM_LCR_LPM_MASK) | CPM_LCR_LPM_SLEEP)
+
+#define __cpm_stop_all() (REG_CPM_CLKGR = 0x7fff)
+#define __cpm_stop_uart1() (REG_CPM_CLKGR |= CPM_CLKGR_UART1)
+#define __cpm_stop_uhc() (REG_CPM_CLKGR |= CPM_CLKGR_UHC)
+#define __cpm_stop_ipu() (REG_CPM_CLKGR |= CPM_CLKGR_IPU)
+#define __cpm_stop_dmac() (REG_CPM_CLKGR |= CPM_CLKGR_DMAC)
+#define __cpm_stop_udc() (REG_CPM_CLKGR |= CPM_CLKGR_UDC)
+#define __cpm_stop_lcd() (REG_CPM_CLKGR |= CPM_CLKGR_LCD)
+#define __cpm_stop_cim() (REG_CPM_CLKGR |= CPM_CLKGR_CIM)
+#define __cpm_stop_sadc() (REG_CPM_CLKGR |= CPM_CLKGR_SADC)
+#define __cpm_stop_msc() (REG_CPM_CLKGR |= CPM_CLKGR_MSC)
+#define __cpm_stop_aic1() (REG_CPM_CLKGR |= CPM_CLKGR_AIC1)
+#define __cpm_stop_aic2() (REG_CPM_CLKGR |= CPM_CLKGR_AIC2)
+#define __cpm_stop_ssi() (REG_CPM_CLKGR |= CPM_CLKGR_SSI)
+#define __cpm_stop_i2c() (REG_CPM_CLKGR |= CPM_CLKGR_I2C)
+#define __cpm_stop_rtc() (REG_CPM_CLKGR |= CPM_CLKGR_RTC)
+#define __cpm_stop_tcu() (REG_CPM_CLKGR |= CPM_CLKGR_TCU)
+#define __cpm_stop_uart0() (REG_CPM_CLKGR |= CPM_CLKGR_UART0)
+
+#define __cpm_start_all() (REG_CPM_CLKGR = 0x0)
+#define __cpm_start_uart1() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART1)
+#define __cpm_start_uhc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UHC)
+#define __cpm_start_ipu() (REG_CPM_CLKGR &= ~CPM_CLKGR_IPU)
+#define __cpm_start_dmac() (REG_CPM_CLKGR &= ~CPM_CLKGR_DMAC)
+#define __cpm_start_udc() (REG_CPM_CLKGR &= ~CPM_CLKGR_UDC)
+#define __cpm_start_lcd() (REG_CPM_CLKGR &= ~CPM_CLKGR_LCD)
+#define __cpm_start_cim() (REG_CPM_CLKGR &= ~CPM_CLKGR_CIM)
+#define __cpm_start_sadc() (REG_CPM_CLKGR &= ~CPM_CLKGR_SADC)
+#define __cpm_start_msc() (REG_CPM_CLKGR &= ~CPM_CLKGR_MSC)
+#define __cpm_start_aic1() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC1)
+#define __cpm_start_aic2() (REG_CPM_CLKGR &= ~CPM_CLKGR_AIC2)
+#define __cpm_start_ssi() (REG_CPM_CLKGR &= ~CPM_CLKGR_SSI)
+#define __cpm_start_i2c() (REG_CPM_CLKGR &= ~CPM_CLKGR_I2C)
+#define __cpm_start_rtc() (REG_CPM_CLKGR &= ~CPM_CLKGR_RTC)
+#define __cpm_start_tcu() (REG_CPM_CLKGR &= ~CPM_CLKGR_TCU)
+#define __cpm_start_uart0() (REG_CPM_CLKGR &= ~CPM_CLKGR_UART0)
+
+#define __cpm_get_o1st() \
+ ((REG_CPM_SCR & CPM_SCR_O1ST_MASK) >> CPM_SCR_O1ST_BIT)
+#define __cpm_set_o1st(v) \
+ (REG_CPM_SCR = (REG_CPM_SCR & ~CPM_SCR_O1ST_MASK) | ((v) << (CPM_SCR_O1ST_BIT)))
+#define __cpm_suspend_udcphy() (REG_CPM_SCR &= ~CPM_SCR_UDCPHY_ENABLE)
+#define __cpm_suspend_usbphy() (REG_CPM_SCR |= CPM_SCR_USBPHY_DISABLE)
+#define __cpm_enable_osc_in_sleep() (REG_CPM_SCR |= CPM_SCR_OSC_ENABLE)
+
+
+#ifdef CONFIG_SYS_EXTAL
+#define JZ_EXTAL CONFIG_SYS_EXTAL
+#else
+#define JZ_EXTAL 3686400
+#endif
+#define JZ_EXTAL2 32768 /* RTC clock */
+
+/* PLL output frequency */
+static __inline__ unsigned int __cpm_get_pllout(void)
+{
+ unsigned long m, n, no, pllout;
+ unsigned long cppcr = REG_CPM_CPPCR;
+ unsigned long od[4] = {1, 2, 2, 4};
+ if ((cppcr & CPM_CPPCR_PLLEN) && !(cppcr & CPM_CPPCR_PLLBP)) {
+ m = __cpm_get_pllm() + 2;
+ n = __cpm_get_plln() + 2;
+ no = od[__cpm_get_pllod()];
+ pllout = ((JZ_EXTAL) / (n * no)) * m;
+ } else
+ pllout = JZ_EXTAL;
+ return pllout;
+}
+
+/* PLL output frequency for MSC/I2S/LCD/USB */
+static __inline__ unsigned int __cpm_get_pllout2(void)
+{
+ if (REG_CPM_CPCCR & CPM_CPCCR_PCS)
+ return __cpm_get_pllout();
+ else
+ return __cpm_get_pllout()/2;
+}
+
+/* CPU core clock */
+static __inline__ unsigned int __cpm_get_cclk(void)
+{
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ return __cpm_get_pllout() / div[__cpm_get_cdiv()];
+}
+
+/* AHB system bus clock */
+static __inline__ unsigned int __cpm_get_hclk(void)
+{
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ return __cpm_get_pllout() / div[__cpm_get_hdiv()];
+}
+
+/* Memory bus clock */
+static __inline__ unsigned int __cpm_get_mclk(void)
+{
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ return __cpm_get_pllout() / div[__cpm_get_mdiv()];
+}
+
+/* APB peripheral bus clock */
+static __inline__ unsigned int __cpm_get_pclk(void)
+{
+ int div[] = {1, 2, 3, 4, 6, 8, 12, 16, 24, 32};
+
+ return __cpm_get_pllout() / div[__cpm_get_pdiv()];
+}
+
+/* LCDC module clock */
+static __inline__ unsigned int __cpm_get_lcdclk(void)
+{
+ return __cpm_get_pllout2() / (__cpm_get_ldiv() + 1);
+}
+
+/* LCD pixel clock */
+static __inline__ unsigned int __cpm_get_pixclk(void)
+{
+ return __cpm_get_pllout2() / (__cpm_get_pixdiv() + 1);
+}
+
+/* I2S clock */
+static __inline__ unsigned int __cpm_get_i2sclk(void)
+{
+ if (REG_CPM_CPCCR & CPM_CPCCR_I2CS) {
+ return __cpm_get_pllout2() / (__cpm_get_i2sdiv() + 1);
+ }
+ else {
+ return JZ_EXTAL;
+ }
+}
+
+/* USB clock */
+static __inline__ unsigned int __cpm_get_usbclk(void)
+{
+ if (REG_CPM_CPCCR & CPM_CPCCR_UCS) {
+ return __cpm_get_pllout2() / (__cpm_get_udiv() + 1);
+ }
+ else {
+ return JZ_EXTAL;
+ }
+}
+
+/* MSC clock */
+static __inline__ unsigned int __cpm_get_mscclk(void)
+{
+ return __cpm_get_pllout2() / (__cpm_get_mscdiv() + 1);
+}
+
+/* EXTAL clock for UART,I2C,SSI,TCU,USB-PHY */
+static __inline__ unsigned int __cpm_get_extalclk(void)
+{
+ return JZ_EXTAL;
+}
+
+/* RTC clock for CPM,INTC,RTC,TCU,WDT */
+static __inline__ unsigned int __cpm_get_rtcclk(void)
+{
+ return JZ_EXTAL2;
+}
+
+/*
+ * Output 24MHz for SD and 16MHz for MMC.
+ */
+static inline void __cpm_select_msc_clk(int sd)
+{
+ unsigned int pllout2 = __cpm_get_pllout2();
+ unsigned int div = 0;
+
+ if (sd) {
+ div = pllout2 / 24000000;
+ }
+ else {
+ div = pllout2 / 16000000;
+ }
+
+ REG_CPM_MSCCDR = div - 1;
+}
+
+/*
+ * TCU
+ */
+/* where 'n' is the TCU channel */
+#define __tcu_select_extalclk(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_EXT_EN)
+#define __tcu_select_rtcclk(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_RTC_EN)
+#define __tcu_select_pclk(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~(TCU_TCSR_EXT_EN | TCU_TCSR_RTC_EN | TCU_TCSR_PCK_EN)) | TCU_TCSR_PCK_EN)
+
+#define __tcu_select_clk_div1(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE1)
+#define __tcu_select_clk_div4(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE4)
+#define __tcu_select_clk_div16(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE16)
+#define __tcu_select_clk_div64(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE64)
+#define __tcu_select_clk_div256(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE256)
+#define __tcu_select_clk_div1024(n) \
+ (REG_TCU_TCSR((n)) = (REG_TCU_TCSR((n)) & ~TCU_TCSR_PRESCALE_MASK) | TCU_TCSR_PRESCALE1024)
+
+#define __tcu_enable_pwm_output(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_EN )
+#define __tcu_disable_pwm_output(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_EN )
+
+#define __tcu_init_pwm_output_high(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_INITL_HIGH )
+#define __tcu_init_pwm_output_low(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_INITL_HIGH )
+
+#define __tcu_set_pwm_output_shutdown_graceful(n) ( REG_TCU_TCSR((n)) &= ~TCU_TCSR_PWM_SD )
+#define __tcu_set_pwm_output_shutdown_abrupt(n) ( REG_TCU_TCSR((n)) |= TCU_TCSR_PWM_SD )
+
+#define __tcu_start_counter(n) ( REG_TCU_TESR |= (1 << (n)) )
+#define __tcu_stop_counter(n) ( REG_TCU_TECR |= (1 << (n)) )
+
+#define __tcu_half_match_flag(n) ( REG_TCU_TFR & (1 << ((n) + 16)) )
+#define __tcu_full_match_flag(n) ( REG_TCU_TFR & (1 << (n)) )
+#define __tcu_set_half_match_flag(n) ( REG_TCU_TFSR = (1 << ((n) + 16)) )
+#define __tcu_set_full_match_flag(n) ( REG_TCU_TFSR = (1 << (n)) )
+#define __tcu_clear_half_match_flag(n) ( REG_TCU_TFCR = (1 << ((n) + 16)) )
+#define __tcu_clear_full_match_flag(n) ( REG_TCU_TFCR = (1 << (n)) )
+#define __tcu_mask_half_match_irq(n) ( REG_TCU_TMSR = (1 << ((n) + 16)) )
+#define __tcu_mask_full_match_irq(n) ( REG_TCU_TMSR = (1 << (n)) )
+#define __tcu_unmask_half_match_irq(n) ( REG_TCU_TMCR = (1 << ((n) + 16)) )
+#define __tcu_unmask_full_match_irq(n) ( REG_TCU_TMCR = (1 << (n)) )
+
+#define __tcu_wdt_clock_stopped() ( REG_TCU_TSR & TCU_TSSR_WDTSC )
+#define __tcu_timer_clock_stopped(n) ( REG_TCU_TSR & (1 << (n)) )
+
+#define __tcu_start_wdt_clock() ( REG_TCU_TSCR = TCU_TSSR_WDTSC )
+#define __tcu_start_timer_clock(n) ( REG_TCU_TSCR = (1 << (n)) )
+
+#define __tcu_stop_wdt_clock() ( REG_TCU_TSSR = TCU_TSSR_WDTSC )
+#define __tcu_stop_timer_clock(n) ( REG_TCU_TSSR = (1 << (n)) )
+
+#define __tcu_get_count(n) ( REG_TCU_TCNT((n)) )
+#define __tcu_set_count(n,v) ( REG_TCU_TCNT((n)) = (v) )
+#define __tcu_set_full_data(n,v) ( REG_TCU_TDFR((n)) = (v) )
+#define __tcu_set_half_data(n,v) ( REG_TCU_TDHR((n)) = (v) )
+
+
+/***************************************************************************
+ * WDT
+ ***************************************************************************/
+#define __wdt_start() ( REG_WDT_TCER |= WDT_TCER_TCEN )
+#define __wdt_stop() ( REG_WDT_TCER &= ~WDT_TCER_TCEN )
+#define __wdt_set_count(v) ( REG_WDT_TCNT = (v) )
+#define __wdt_set_data(v) ( REG_WDT_TDR = (v) )
+
+#define __wdt_select_extalclk() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_EXT_EN)
+#define __wdt_select_rtcclk() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_RTC_EN)
+#define __wdt_select_pclk() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~(WDT_TCSR_EXT_EN | WDT_TCSR_RTC_EN | WDT_TCSR_PCK_EN)) | WDT_TCSR_PCK_EN)
+
+#define __wdt_select_clk_div1() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE1)
+#define __wdt_select_clk_div4() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE4)
+#define __wdt_select_clk_div16() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE16)
+#define __wdt_select_clk_div64() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE64)
+#define __wdt_select_clk_div256() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE256)
+#define __wdt_select_clk_div1024() \
+ (REG_WDT_TCSR = (REG_WDT_TCSR & ~WDT_TCSR_PRESCALE_MASK) | WDT_TCSR_PRESCALE1024)
+
+
+/***************************************************************************
+ * UART
+ ***************************************************************************/
+
+#define __uart_enable() ( REG8(UART0_FCR) |= UARTFCR_UUE | UARTFCR_FE )
+#define __uart_disable() ( REG8(UART0_FCR) = ~UARTFCR_UUE )
+
+#define __uart_enable_transmit_irq() ( REG8(UART0_IER) |= UARTIER_TIE )
+#define __uart_disable_transmit_irq() ( REG8(UART0_IER) &= ~UARTIER_TIE )
+
+#define __uart_enable_receive_irq() \
+ ( REG8(UART0_IER) |= UARTIER_RIE | UARTIER_RLIE | UARTIER_RTIE )
+#define __uart_disable_receive_irq() \
+ ( REG8(UART0_IER) &= ~(UARTIER_RIE | UARTIER_RLIE | UARTIER_RTIE) )
+
+#define __uart_enable_loopback() ( REG8(UART0_MCR) |= UARTMCR_LOOP )
+#define __uart_disable_loopback() ( REG8(UART0_MCR) &= ~UARTMCR_LOOP )
+
+#define __uart_set_8n1() ( REG8(UART0_LCR) = UARTLCR_WLEN_8 )
+
+#define __uart_set_baud(devclk, baud) \
+ do { \
+ REG8(UART0_LCR) |= UARTLCR_DLAB; \
+ REG8(UART0_DLLR) = (devclk / 16 / baud) & 0xff; \
+ REG8(UART0_DLHR) = ((devclk / 16 / baud) >> 8) & 0xff; \
+ REG8(UART0_LCR) &= ~UARTLCR_DLAB; \
+ } while (0)
+
+#define __uart_parity_error() ( (REG8(UART0_LSR) & UARTLSR_PER) != 0 )
+#define __uart_clear_errors() \
+ ( REG8(UART0_LSR) &= ~(UARTLSR_ORER | UARTLSR_BRK | UARTLSR_FER | UARTLSR_PER | UARTLSR_RFER) )
+
+#define __uart_transmit_fifo_empty() ( (REG8(UART0_LSR) & UARTLSR_TDRQ) != 0 )
+#define __uart_transmit_end() ( (REG8(UART0_LSR) & UARTLSR_TEMT) != 0 )
+#define __uart_transmit_char(ch) ( REG8(UART0_TDR) = (ch) )
+#define __uart_receive_fifo_full() ( (REG8(UART0_LSR) & UARTLSR_DR) != 0 )
+#define __uart_receive_ready() ( (REG8(UART0_LSR) & UARTLSR_DR) != 0 )
+#define __uart_receive_char() REG8(UART0_RDR)
+#define __uart_disable_irda() ( REG8(UART0_SIRCR) &= ~(SIRCR_TSIRE | SIRCR_RSIRE) )
+#define __uart_enable_irda() \
+ /* Tx high pulse as 0, Rx low pulse as 0 */ \
+ ( REG8(UART0_SIRCR) = SIRCR_TSIRE | SIRCR_RSIRE | SIRCR_RXPL | SIRCR_TPWS )
+
+
+/***************************************************************************
+ * DMAC
+ ***************************************************************************/
+
+/* n is the DMA channel (0 - 5) */
+
+#define __dmac_enable_module() \
+ ( REG_DMAC_DMACR |= DMAC_DMACR_DMAE | DMAC_DMACR_PR_RR )
+#define __dmac_disable_module() \
+ ( REG_DMAC_DMACR &= ~DMAC_DMACR_DMAE )
+
+/* p=0,1,2,3 */
+#define __dmac_set_priority(p) \
+do { \
+ REG_DMAC_DMACR &= ~DMAC_DMACR_PR_MASK; \
+ REG_DMAC_DMACR |= ((p) << DMAC_DMACR_PR_BIT); \
+} while (0)
+
+#define __dmac_test_halt_error() ( REG_DMAC_DMACR & DMAC_DMACR_HLT )
+#define __dmac_test_addr_error() ( REG_DMAC_DMACR & DMAC_DMACR_AR )
+
+#define __dmac_enable_descriptor(n) \
+ ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_NDES )
+#define __dmac_disable_descriptor(n) \
+ ( REG_DMAC_DCCSR((n)) |= DMAC_DCCSR_NDES )
+
+#define __dmac_enable_channel(n) \
+ ( REG_DMAC_DCCSR((n)) |= DMAC_DCCSR_EN )
+#define __dmac_disable_channel(n) \
+ ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_EN )
+#define __dmac_channel_enabled(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_EN )
+
+#define __dmac_channel_enable_irq(n) \
+ ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_TIE )
+#define __dmac_channel_disable_irq(n) \
+ ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_TIE )
+
+#define __dmac_channel_transmit_halt_detected(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_HLT )
+#define __dmac_channel_transmit_end_detected(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_TT )
+#define __dmac_channel_address_error_detected(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_AR )
+#define __dmac_channel_count_terminated_detected(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_CT )
+#define __dmac_channel_descriptor_invalid_detected(n) \
+ ( REG_DMAC_DCCSR((n)) & DMAC_DCCSR_INV )
+
+#define __dmac_channel_clear_transmit_halt(n) \
+ ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_HLT )
+#define __dmac_channel_clear_transmit_end(n) \
+ ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_TT )
+#define __dmac_channel_clear_address_error(n) \
+ ( REG_DMAC_DCCSR(n) &= ~DMAC_DCCSR_AR )
+#define __dmac_channel_clear_count_terminated(n) \
+ ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_CT )
+#define __dmac_channel_clear_descriptor_invalid(n) \
+ ( REG_DMAC_DCCSR((n)) &= ~DMAC_DCCSR_INV )
+
+#define __dmac_channel_set_single_mode(n) \
+ ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_TM )
+#define __dmac_channel_set_block_mode(n) \
+ ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_TM )
+
+#define __dmac_channel_set_transfer_unit_32bit(n) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_32BIT; \
+} while (0)
+
+#define __dmac_channel_set_transfer_unit_16bit(n) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_16BIT; \
+} while (0)
+
+#define __dmac_channel_set_transfer_unit_8bit(n) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_8BIT; \
+} while (0)
+
+#define __dmac_channel_set_transfer_unit_16byte(n) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_16BYTE; \
+} while (0)
+
+#define __dmac_channel_set_transfer_unit_32byte(n) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DS_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DS_32BYTE; \
+} while (0)
+
+/* w=8,16,32 */
+#define __dmac_channel_set_dest_port_width(n,w) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DWDH_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_DWDH_##w; \
+} while (0)
+
+/* w=8,16,32 */
+#define __dmac_channel_set_src_port_width(n,w) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_SWDH_MASK; \
+ REG_DMAC_DCMD((n)) |= DMAC_DCMD_SWDH_##w; \
+} while (0)
+
+/* v=0-15 */
+#define __dmac_channel_set_rdil(n,v) \
+do { \
+ REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_RDIL_MASK; \
+ REG_DMAC_DCMD((n) |= ((v) << DMAC_DCMD_RDIL_BIT); \
+} while (0)
+
+#define __dmac_channel_dest_addr_fixed(n) \
+ ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_DAI )
+#define __dmac_channel_dest_addr_increment(n) \
+ ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_DAI )
+
+#define __dmac_channel_src_addr_fixed(n) \
+ ( REG_DMAC_DCMD((n)) &= ~DMAC_DCMD_SAI )
+#define __dmac_channel_src_addr_increment(n) \
+ ( REG_DMAC_DCMD((n)) |= DMAC_DCMD_SAI )
+
+#define __dmac_channel_set_doorbell(n) \
+ ( REG_DMAC_DMADBSR = (1 << (n)) )
+
+#define __dmac_channel_irq_detected(n) ( REG_DMAC_DMAIPR & (1 << (n)) )
+#define __dmac_channel_ack_irq(n) ( REG_DMAC_DMAIPR &= ~(1 << (n)) )
+
+static __inline__ int __dmac_get_irq(void)
+{
+ int i;
+ for (i = 0; i < MAX_DMA_NUM; i++)
+ if (__dmac_channel_irq_detected(i))
+ return i;
+ return -1;
+}
+
+
+/***************************************************************************
+ * AIC (AC'97 & I2S Controller)
+ ***************************************************************************/
+
+#define __aic_enable() ( REG_AIC_FR |= AIC_FR_ENB )
+#define __aic_disable() ( REG_AIC_FR &= ~AIC_FR_ENB )
+
+#define __aic_select_ac97() ( REG_AIC_FR &= ~AIC_FR_AUSEL )
+#define __aic_select_i2s() ( REG_AIC_FR |= AIC_FR_AUSEL )
+
+#define __i2s_as_master() ( REG_AIC_FR |= AIC_FR_BCKD | AIC_FR_SYNCD )
+#define __i2s_as_slave() ( REG_AIC_FR &= ~(AIC_FR_BCKD | AIC_FR_SYNCD) )
+#define __aic_reset_status() ( REG_AIC_FR & AIC_FR_RST )
+
+#define __aic_reset() \
+do { \
+ REG_AIC_FR |= AIC_FR_RST; \
+} while(0)
+
+
+#define __aic_set_transmit_trigger(n) \
+do { \
+ REG_AIC_FR &= ~AIC_FR_TFTH_MASK; \
+ REG_AIC_FR |= ((n) << AIC_FR_TFTH_BIT); \
+} while(0)
+
+#define __aic_set_receive_trigger(n) \
+do { \
+ REG_AIC_FR &= ~AIC_FR_RFTH_MASK; \
+ REG_AIC_FR |= ((n) << AIC_FR_RFTH_BIT); \
+} while(0)
+
+#define __aic_enable_record() ( REG_AIC_CR |= AIC_CR_EREC )
+#define __aic_disable_record() ( REG_AIC_CR &= ~AIC_CR_EREC )
+#define __aic_enable_replay() ( REG_AIC_CR |= AIC_CR_ERPL )
+#define __aic_disable_replay() ( REG_AIC_CR &= ~AIC_CR_ERPL )
+#define __aic_enable_loopback() ( REG_AIC_CR |= AIC_CR_ENLBF )
+#define __aic_disable_loopback() ( REG_AIC_CR &= ~AIC_CR_ENLBF )
+
+#define __aic_flush_fifo() ( REG_AIC_CR |= AIC_CR_FLUSH )
+#define __aic_unflush_fifo() ( REG_AIC_CR &= ~AIC_CR_FLUSH )
+
+#define __aic_enable_transmit_intr() \
+ ( REG_AIC_CR |= (AIC_CR_ETFS | AIC_CR_ETUR) )
+#define __aic_disable_transmit_intr() \
+ ( REG_AIC_CR &= ~(AIC_CR_ETFS | AIC_CR_ETUR) )
+#define __aic_enable_receive_intr() \
+ ( REG_AIC_CR |= (AIC_CR_ERFS | AIC_CR_EROR) )
+#define __aic_disable_receive_intr() \
+ ( REG_AIC_CR &= ~(AIC_CR_ERFS | AIC_CR_EROR) )
+
+#define __aic_enable_transmit_dma() ( REG_AIC_CR |= AIC_CR_TDMS )
+#define __aic_disable_transmit_dma() ( REG_AIC_CR &= ~AIC_CR_TDMS )
+#define __aic_enable_receive_dma() ( REG_AIC_CR |= AIC_CR_RDMS )
+#define __aic_disable_receive_dma() ( REG_AIC_CR &= ~AIC_CR_RDMS )
+
+#define __aic_enable_mono2stereo() ( REG_AIC_CR |= AIC_CR_M2S )
+#define __aic_disable_mono2stereo() ( REG_AIC_CR &= ~AIC_CR_M2S )
+#define __aic_enable_byteswap() ( REG_AIC_CR |= AIC_CR_ENDSW )
+#define __aic_disable_byteswap() ( REG_AIC_CR &= ~AIC_CR_ENDSW )
+#define __aic_enable_unsignadj() ( REG_AIC_CR |= AIC_CR_AVSTSU )
+#define __aic_disable_unsignadj() ( REG_AIC_CR &= ~AIC_CR_AVSTSU )
+
+#define AC97_PCM_XS_L_FRONT AIC_ACCR1_XS_SLOT3
+#define AC97_PCM_XS_R_FRONT AIC_ACCR1_XS_SLOT4
+#define AC97_PCM_XS_CENTER AIC_ACCR1_XS_SLOT6
+#define AC97_PCM_XS_L_SURR AIC_ACCR1_XS_SLOT7
+#define AC97_PCM_XS_R_SURR AIC_ACCR1_XS_SLOT8
+#define AC97_PCM_XS_LFE AIC_ACCR1_XS_SLOT9
+
+#define AC97_PCM_RS_L_FRONT AIC_ACCR1_RS_SLOT3
+#define AC97_PCM_RS_R_FRONT AIC_ACCR1_RS_SLOT4
+#define AC97_PCM_RS_CENTER AIC_ACCR1_RS_SLOT6
+#define AC97_PCM_RS_L_SURR AIC_ACCR1_RS_SLOT7
+#define AC97_PCM_RS_R_SURR AIC_ACCR1_RS_SLOT8
+#define AC97_PCM_RS_LFE AIC_ACCR1_RS_SLOT9
+
+#define __ac97_set_xs_none() ( REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK )
+#define __ac97_set_xs_mono() \
+do { \
+ REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK; \
+ REG_AIC_ACCR1 |= AC97_PCM_XS_R_FRONT; \
+} while(0)
+#define __ac97_set_xs_stereo() \
+do { \
+ REG_AIC_ACCR1 &= ~AIC_ACCR1_XS_MASK; \
+ REG_AIC_ACCR1 |= AC97_PCM_XS_L_FRONT | AC97_PCM_XS_R_FRONT; \
+} while(0)
+
+/* In fact, only stereo is support now. */
+#define __ac97_set_rs_none() ( REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK )
+#define __ac97_set_rs_mono() \
+do { \
+ REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK; \
+ REG_AIC_ACCR1 |= AC97_PCM_RS_R_FRONT; \
+} while(0)
+#define __ac97_set_rs_stereo() \
+do { \
+ REG_AIC_ACCR1 &= ~AIC_ACCR1_RS_MASK; \
+ REG_AIC_ACCR1 |= AC97_PCM_RS_L_FRONT | AC97_PCM_RS_R_FRONT; \
+} while(0)
+
+#define __ac97_warm_reset_codec() \
+ do { \
+ REG_AIC_ACCR2 |= AIC_ACCR2_SA; \
+ REG_AIC_ACCR2 |= AIC_ACCR2_SS; \
+ udelay(2); \
+ REG_AIC_ACCR2 &= ~AIC_ACCR2_SS; \
+ REG_AIC_ACCR2 &= ~AIC_ACCR2_SA; \
+ } while (0)
+
+#define __ac97_cold_reset_codec() \
+ do { \
+ REG_AIC_ACCR2 |= AIC_ACCR2_SR; \
+ udelay(2); \
+ REG_AIC_ACCR2 &= ~AIC_ACCR2_SR; \
+ } while (0)
+
+/* n=8,16,18,20 */
+#define __ac97_set_iass(n) \
+ ( REG_AIC_ACCR2 = (REG_AIC_ACCR2 & ~AIC_ACCR2_IASS_MASK) | AIC_ACCR2_IASS_##n##BIT )
+#define __ac97_set_oass(n) \
+ ( REG_AIC_ACCR2 = (REG_AIC_ACCR2 & ~AIC_ACCR2_OASS_MASK) | AIC_ACCR2_OASS_##n##BIT )
+
+#define __i2s_select_i2s() ( REG_AIC_I2SCR &= ~AIC_I2SCR_AMSL )
+#define __i2s_select_msbjustified() ( REG_AIC_I2SCR |= AIC_I2SCR_AMSL )
+
+/* n=8,16,18,20,24 */
+/*#define __i2s_set_sample_size(n) \
+ ( REG_AIC_I2SCR |= (REG_AIC_I2SCR & ~AIC_I2SCR_WL_MASK) | AIC_I2SCR_WL_##n##BIT )*/
+
+#define __i2s_set_oss_sample_size(n) \
+ ( REG_AIC_CR = (REG_AIC_CR & ~AIC_CR_OSS_MASK) | AIC_CR_OSS_##n##BIT )
+#define __i2s_set_iss_sample_size(n) \
+ ( REG_AIC_CR = (REG_AIC_CR & ~AIC_CR_ISS_MASK) | AIC_CR_ISS_##n##BIT )
+
+#define __i2s_stop_bitclk() ( REG_AIC_I2SCR |= AIC_I2SCR_STPBK )
+#define __i2s_start_bitclk() ( REG_AIC_I2SCR &= ~AIC_I2SCR_STPBK )
+
+#define __aic_transmit_request() ( REG_AIC_SR & AIC_SR_TFS )
+#define __aic_receive_request() ( REG_AIC_SR & AIC_SR_RFS )
+#define __aic_transmit_underrun() ( REG_AIC_SR & AIC_SR_TUR )
+#define __aic_receive_overrun() ( REG_AIC_SR & AIC_SR_ROR )
+
+#define __aic_clear_errors() ( REG_AIC_SR &= ~(AIC_SR_TUR | AIC_SR_ROR) )
+
+#define __aic_get_transmit_resident() \
+ ( (REG_AIC_SR & AIC_SR_TFL_MASK) >> AIC_SR_TFL_BIT )
+#define __aic_get_receive_count() \
+ ( (REG_AIC_SR & AIC_SR_RFL_MASK) >> AIC_SR_RFL_BIT )
+
+#define __ac97_command_transmitted() ( REG_AIC_ACSR & AIC_ACSR_CADT )
+#define __ac97_status_received() ( REG_AIC_ACSR & AIC_ACSR_SADR )
+#define __ac97_status_receive_timeout() ( REG_AIC_ACSR & AIC_ACSR_RSTO )
+#define __ac97_codec_is_low_power_mode() ( REG_AIC_ACSR & AIC_ACSR_CLPM )
+#define __ac97_codec_is_ready() ( REG_AIC_ACSR & AIC_ACSR_CRDY )
+#define __ac97_slot_error_detected() ( REG_AIC_ACSR & AIC_ACSR_SLTERR )
+#define __ac97_clear_slot_error() ( REG_AIC_ACSR &= ~AIC_ACSR_SLTERR )
+
+#define __i2s_is_busy() ( REG_AIC_I2SSR & AIC_I2SSR_BSY )
+
+#define CODEC_READ_CMD (1 << 19)
+#define CODEC_WRITE_CMD (0 << 19)
+#define CODEC_REG_INDEX_BIT 12
+#define CODEC_REG_INDEX_MASK (0x7f << CODEC_REG_INDEX_BIT) /* 18:12 */
+#define CODEC_REG_DATA_BIT 4
+#define CODEC_REG_DATA_MASK (0x0ffff << 4) /* 19:4 */
+
+#define __ac97_out_rcmd_addr(reg) \
+do { \
+ REG_AIC_ACCAR = CODEC_READ_CMD | ((reg) << CODEC_REG_INDEX_BIT); \
+} while (0)
+
+#define __ac97_out_wcmd_addr(reg) \
+do { \
+ REG_AIC_ACCAR = CODEC_WRITE_CMD | ((reg) << CODEC_REG_INDEX_BIT); \
+} while (0)
+
+#define __ac97_out_data(value) \
+do { \
+ REG_AIC_ACCDR = ((value) << CODEC_REG_DATA_BIT); \
+} while (0)
+
+#define __ac97_in_data() \
+ ( (REG_AIC_ACSDR & CODEC_REG_DATA_MASK) >> CODEC_REG_DATA_BIT )
+
+#define __ac97_in_status_addr() \
+ ( (REG_AIC_ACSAR & CODEC_REG_INDEX_MASK) >> CODEC_REG_INDEX_BIT )
+
+#define __i2s_set_sample_rate(i2sclk, sync) \
+ ( REG_AIC_I2SDIV = ((i2sclk) / (4*64)) / (sync) )
+
+#define __aic_write_tfifo(v) ( REG_AIC_DR = (v) )
+#define __aic_read_rfifo() ( REG_AIC_DR )
+
+#define __aic_internal_codec() ( REG_AIC_FR |= AIC_FR_ICDC )
+#define __aic_external_codec() ( REG_AIC_FR &= ~AIC_FR_ICDC )
+
+/* Define next ops for AC97 compatible */
+
+#define AC97_ACSR AIC_ACSR
+
+#define __ac97_enable() __aic_enable(); __aic_select_ac97()
+#define __ac97_disable() __aic_disable()
+#define __ac97_reset() __aic_reset()
+
+#define __ac97_set_transmit_trigger(n) __aic_set_transmit_trigger(n)
+#define __ac97_set_receive_trigger(n) __aic_set_receive_trigger(n)
+
+#define __ac97_enable_record() __aic_enable_record()
+#define __ac97_disable_record() __aic_disable_record()
+#define __ac97_enable_replay() __aic_enable_replay()
+#define __ac97_disable_replay() __aic_disable_replay()
+#define __ac97_enable_loopback() __aic_enable_loopback()
+#define __ac97_disable_loopback() __aic_disable_loopback()
+
+#define __ac97_enable_transmit_dma() __aic_enable_transmit_dma()
+#define __ac97_disable_transmit_dma() __aic_disable_transmit_dma()
+#define __ac97_enable_receive_dma() __aic_enable_receive_dma()
+#define __ac97_disable_receive_dma() __aic_disable_receive_dma()
+
+#define __ac97_transmit_request() __aic_transmit_request()
+#define __ac97_receive_request() __aic_receive_request()
+#define __ac97_transmit_underrun() __aic_transmit_underrun()
+#define __ac97_receive_overrun() __aic_receive_overrun()
+
+#define __ac97_clear_errors() __aic_clear_errors()
+
+#define __ac97_get_transmit_resident() __aic_get_transmit_resident()
+#define __ac97_get_receive_count() __aic_get_receive_count()
+
+#define __ac97_enable_transmit_intr() __aic_enable_transmit_intr()
+#define __ac97_disable_transmit_intr() __aic_disable_transmit_intr()
+#define __ac97_enable_receive_intr() __aic_enable_receive_intr()
+#define __ac97_disable_receive_intr() __aic_disable_receive_intr()
+
+#define __ac97_write_tfifo(v) __aic_write_tfifo(v)
+#define __ac97_read_rfifo() __aic_read_rfifo()
+
+/* Define next ops for I2S compatible */
+
+#define I2S_ACSR AIC_I2SSR
+
+#define __i2s_enable() __aic_enable(); __aic_select_i2s()
+#define __i2s_disable() __aic_disable()
+#define __i2s_reset() __aic_reset()
+
+#define __i2s_set_transmit_trigger(n) __aic_set_transmit_trigger(n)
+#define __i2s_set_receive_trigger(n) __aic_set_receive_trigger(n)
+
+#define __i2s_enable_record() __aic_enable_record()
+#define __i2s_disable_record() __aic_disable_record()
+#define __i2s_enable_replay() __aic_enable_replay()
+#define __i2s_disable_replay() __aic_disable_replay()
+#define __i2s_enable_loopback() __aic_enable_loopback()
+#define __i2s_disable_loopback() __aic_disable_loopback()
+
+#define __i2s_enable_transmit_dma() __aic_enable_transmit_dma()
+#define __i2s_disable_transmit_dma() __aic_disable_transmit_dma()
+#define __i2s_enable_receive_dma() __aic_enable_receive_dma()
+#define __i2s_disable_receive_dma() __aic_disable_receive_dma()
+
+#define __i2s_transmit_request() __aic_transmit_request()
+#define __i2s_receive_request() __aic_receive_request()
+#define __i2s_transmit_underrun() __aic_transmit_underrun()
+#define __i2s_receive_overrun() __aic_receive_overrun()
+
+#define __i2s_clear_errors() __aic_clear_errors()
+
+#define __i2s_get_transmit_resident() __aic_get_transmit_resident()
+#define __i2s_get_receive_count() __aic_get_receive_count()
+
+#define __i2s_enable_transmit_intr() __aic_enable_transmit_intr()
+#define __i2s_disable_transmit_intr() __aic_disable_transmit_intr()
+#define __i2s_enable_receive_intr() __aic_enable_receive_intr()
+#define __i2s_disable_receive_intr() __aic_disable_receive_intr()
+
+#define __i2s_write_tfifo(v) __aic_write_tfifo(v)
+#define __i2s_read_rfifo() __aic_read_rfifo()
+
+#define __i2s_reset_codec() \
+ do { \
+ } while (0)
+
+
+/***************************************************************************
+ * ICDC
+ ***************************************************************************/
+#define __i2s_internal_codec() __aic_internal_codec()
+#define __i2s_external_codec() __aic_external_codec()
+
+/***************************************************************************
+ * INTC
+ ***************************************************************************/
+#define __intc_unmask_irq(n) ( REG_INTC_IMCR = (1 << (n)) )
+#define __intc_mask_irq(n) ( REG_INTC_IMSR = (1 << (n)) )
+#define __intc_ack_irq(n) ( REG_INTC_IPR = (1 << (n)) )
+
+
+/***************************************************************************
+ * I2C
+ ***************************************************************************/
+
+#define __i2c_enable() ( REG_I2C_CR |= I2C_CR_I2CE )
+#define __i2c_disable() ( REG_I2C_CR &= ~I2C_CR_I2CE )
+
+#define __i2c_send_start() ( REG_I2C_CR |= I2C_CR_STA )
+#define __i2c_send_stop() ( REG_I2C_CR |= I2C_CR_STO )
+#define __i2c_send_ack() ( REG_I2C_CR &= ~I2C_CR_AC )
+#define __i2c_send_nack() ( REG_I2C_CR |= I2C_CR_AC )
+
+#define __i2c_set_drf() ( REG_I2C_SR |= I2C_SR_DRF )
+#define __i2c_clear_drf() ( REG_I2C_SR &= ~I2C_SR_DRF )
+#define __i2c_check_drf() ( REG_I2C_SR & I2C_SR_DRF )
+
+#define __i2c_received_ack() ( !(REG_I2C_SR & I2C_SR_ACKF) )
+#define __i2c_is_busy() ( REG_I2C_SR & I2C_SR_BUSY )
+#define __i2c_transmit_ended() ( REG_I2C_SR & I2C_SR_TEND )
+
+#define __i2c_set_clk(dev_clk, i2c_clk) \
+ ( REG_I2C_GR = (dev_clk) / (16*(i2c_clk)) - 1 )
+
+#define __i2c_read() ( REG_I2C_DR )
+#define __i2c_write(val) ( REG_I2C_DR = (val) )
+
+
+/***************************************************************************
+ * MSC
+ ***************************************************************************/
+
+#define __msc_start_op() \
+ ( REG_MSC_STRPCL = MSC_STRPCL_START_OP | MSC_STRPCL_CLOCK_CONTROL_START )
+
+#define __msc_set_resto(to) ( REG_MSC_RESTO = to )
+#define __msc_set_rdto(to) ( REG_MSC_RDTO = to )
+#define __msc_set_cmd(cmd) ( REG_MSC_CMD = cmd )
+#define __msc_set_arg(arg) ( REG_MSC_ARG = arg )
+#define __msc_set_nob(nob) ( REG_MSC_NOB = nob )
+#define __msc_get_nob() ( REG_MSC_NOB )
+#define __msc_set_blklen(len) ( REG_MSC_BLKLEN = len )
+#define __msc_set_cmdat(cmdat) ( REG_MSC_CMDAT = cmdat )
+#define __msc_set_cmdat_ioabort() ( REG_MSC_CMDAT |= MSC_CMDAT_IO_ABORT )
+#define __msc_clear_cmdat_ioabort() ( REG_MSC_CMDAT &= ~MSC_CMDAT_IO_ABORT )
+
+#define __msc_set_cmdat_bus_width1() \
+do { \
+ REG_MSC_CMDAT &= ~MSC_CMDAT_BUS_WIDTH_MASK; \
+ REG_MSC_CMDAT |= MSC_CMDAT_BUS_WIDTH_1BIT; \
+} while(0)
+
+#define __msc_set_cmdat_bus_width4() \
+do { \
+ REG_MSC_CMDAT &= ~MSC_CMDAT_BUS_WIDTH_MASK; \
+ REG_MSC_CMDAT |= MSC_CMDAT_BUS_WIDTH_4BIT; \
+} while(0)
+
+#define __msc_set_cmdat_dma_en() ( REG_MSC_CMDAT |= MSC_CMDAT_DMA_EN )
+#define __msc_set_cmdat_init() ( REG_MSC_CMDAT |= MSC_CMDAT_INIT )
+#define __msc_set_cmdat_busy() ( REG_MSC_CMDAT |= MSC_CMDAT_BUSY )
+#define __msc_set_cmdat_stream() ( REG_MSC_CMDAT |= MSC_CMDAT_STREAM_BLOCK )
+#define __msc_set_cmdat_block() ( REG_MSC_CMDAT &= ~MSC_CMDAT_STREAM_BLOCK )
+#define __msc_set_cmdat_read() ( REG_MSC_CMDAT &= ~MSC_CMDAT_WRITE_READ )
+#define __msc_set_cmdat_write() ( REG_MSC_CMDAT |= MSC_CMDAT_WRITE_READ )
+#define __msc_set_cmdat_data_en() ( REG_MSC_CMDAT |= MSC_CMDAT_DATA_EN )
+
+/* r is MSC_CMDAT_RESPONSE_FORMAT_Rx or MSC_CMDAT_RESPONSE_FORMAT_NONE */
+#define __msc_set_cmdat_res_format(r) \
+do { \
+ REG_MSC_CMDAT &= ~MSC_CMDAT_RESPONSE_FORMAT_MASK; \
+ REG_MSC_CMDAT |= (r); \
+} while(0)
+
+#define __msc_clear_cmdat() \
+ REG_MSC_CMDAT &= ~( MSC_CMDAT_IO_ABORT | MSC_CMDAT_DMA_EN | MSC_CMDAT_INIT| \
+ MSC_CMDAT_BUSY | MSC_CMDAT_STREAM_BLOCK | MSC_CMDAT_WRITE_READ | \
+ MSC_CMDAT_DATA_EN | MSC_CMDAT_RESPONSE_FORMAT_MASK )
+
+#define __msc_get_imask() ( REG_MSC_IMASK )
+#define __msc_mask_all_intrs() ( REG_MSC_IMASK = 0xff )
+#define __msc_unmask_all_intrs() ( REG_MSC_IMASK = 0x00 )
+#define __msc_mask_rd() ( REG_MSC_IMASK |= MSC_IMASK_RXFIFO_RD_REQ )
+#define __msc_unmask_rd() ( REG_MSC_IMASK &= ~MSC_IMASK_RXFIFO_RD_REQ )
+#define __msc_mask_wr() ( REG_MSC_IMASK |= MSC_IMASK_TXFIFO_WR_REQ )
+#define __msc_unmask_wr() ( REG_MSC_IMASK &= ~MSC_IMASK_TXFIFO_WR_REQ )
+#define __msc_mask_endcmdres() ( REG_MSC_IMASK |= MSC_IMASK_END_CMD_RES )
+#define __msc_unmask_endcmdres() ( REG_MSC_IMASK &= ~MSC_IMASK_END_CMD_RES )
+#define __msc_mask_datatrandone() ( REG_MSC_IMASK |= MSC_IMASK_DATA_TRAN_DONE )
+#define __msc_unmask_datatrandone() ( REG_MSC_IMASK &= ~MSC_IMASK_DATA_TRAN_DONE )
+#define __msc_mask_prgdone() ( REG_MSC_IMASK |= MSC_IMASK_PRG_DONE )
+#define __msc_unmask_prgdone() ( REG_MSC_IMASK &= ~MSC_IMASK_PRG_DONE )
+
+/* n=0,1,2,3,4,5,6,7 */
+#define __msc_set_clkrt(n) \
+do { \
+ REG_MSC_CLKRT = n; \
+} while(0)
+
+#define __msc_get_ireg() ( REG_MSC_IREG )
+#define __msc_ireg_rd() ( REG_MSC_IREG & MSC_IREG_RXFIFO_RD_REQ )
+#define __msc_ireg_wr() ( REG_MSC_IREG & MSC_IREG_TXFIFO_WR_REQ )
+#define __msc_ireg_end_cmd_res() ( REG_MSC_IREG & MSC_IREG_END_CMD_RES )
+#define __msc_ireg_data_tran_done() ( REG_MSC_IREG & MSC_IREG_DATA_TRAN_DONE )
+#define __msc_ireg_prg_done() ( REG_MSC_IREG & MSC_IREG_PRG_DONE )
+#define __msc_ireg_clear_end_cmd_res() ( REG_MSC_IREG = MSC_IREG_END_CMD_RES )
+#define __msc_ireg_clear_data_tran_done() ( REG_MSC_IREG = MSC_IREG_DATA_TRAN_DONE )
+#define __msc_ireg_clear_prg_done() ( REG_MSC_IREG = MSC_IREG_PRG_DONE )
+
+#define __msc_get_stat() ( REG_MSC_STAT )
+#define __msc_stat_not_end_cmd_res() ( (REG_MSC_STAT & MSC_STAT_END_CMD_RES) == 0)
+#define __msc_stat_crc_err() \
+ ( REG_MSC_STAT & (MSC_STAT_CRC_RES_ERR | MSC_STAT_CRC_READ_ERROR | MSC_STAT_CRC_WRITE_ERROR_YES) )
+#define __msc_stat_res_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_RES_ERR )
+#define __msc_stat_rd_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_READ_ERROR )
+#define __msc_stat_wr_crc_err() ( REG_MSC_STAT & MSC_STAT_CRC_WRITE_ERROR_YES )
+#define __msc_stat_resto_err() ( REG_MSC_STAT & MSC_STAT_TIME_OUT_RES )
+#define __msc_stat_rdto_err() ( REG_MSC_STAT & MSC_STAT_TIME_OUT_READ )
+
+#define __msc_rd_resfifo() ( REG_MSC_RES )
+#define __msc_rd_rxfifo() ( REG_MSC_RXFIFO )
+#define __msc_wr_txfifo(v) ( REG_MSC_TXFIFO = v )
+
+#define __msc_reset() \
+do { \
+ REG_MSC_STRPCL = MSC_STRPCL_RESET; \
+ while (REG_MSC_STAT & MSC_STAT_IS_RESETTING); \
+} while (0)
+
+#define __msc_start_clk() \
+do { \
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_START; \
+} while (0)
+
+#define __msc_stop_clk() \
+do { \
+ REG_MSC_STRPCL = MSC_STRPCL_CLOCK_CONTROL_STOP; \
+} while (0)
+
+#define MMC_CLK 19169200
+#define SD_CLK 24576000
+
+/* msc_clk should little than pclk and little than clk retrieve from card */
+#define __msc_calc_clk_divisor(type,dev_clk,msc_clk,lv) \
+do { \
+ unsigned int rate, pclk, i; \
+ pclk = dev_clk; \
+ rate = type?SD_CLK:MMC_CLK; \
+ if (msc_clk && msc_clk < pclk) \
+ pclk = msc_clk; \
+ i = 0; \
+ while (pclk < rate) \
+ { \
+ i ++; \
+ rate >>= 1; \
+ } \
+ lv = i; \
+} while(0)
+
+/* divide rate to little than or equal to 400kHz */
+#define __msc_calc_slow_clk_divisor(type, lv) \
+do { \
+ unsigned int rate, i; \
+ rate = (type?SD_CLK:MMC_CLK)/1000/400; \
+ i = 0; \
+ while (rate > 0) \
+ { \
+ rate >>= 1; \
+ i ++; \
+ } \
+ lv = i; \
+} while(0)
+
+
+/***************************************************************************
+ * SSI
+ ***************************************************************************/
+
+#define __ssi_enable() ( REG_SSI_CR0 |= SSI_CR0_SSIE )
+#define __ssi_disable() ( REG_SSI_CR0 &= ~SSI_CR0_SSIE )
+#define __ssi_select_ce() ( REG_SSI_CR0 &= ~SSI_CR0_FSEL )
+
+#define __ssi_normal_mode() ( REG_SSI_ITR &= ~SSI_ITR_IVLTM_MASK )
+
+#define __ssi_select_ce2() \
+do { \
+ REG_SSI_CR0 |= SSI_CR0_FSEL; \
+ REG_SSI_CR1 &= ~SSI_CR1_MULTS; \
+} while (0)
+
+#define __ssi_select_gpc() \
+do { \
+ REG_SSI_CR0 &= ~SSI_CR0_FSEL; \
+ REG_SSI_CR1 |= SSI_CR1_MULTS; \
+} while (0)
+
+#define __ssi_enable_tx_intr() \
+ ( REG_SSI_CR0 |= SSI_CR0_TIE | SSI_CR0_TEIE )
+
+#define __ssi_disable_tx_intr() \
+ ( REG_SSI_CR0 &= ~(SSI_CR0_TIE | SSI_CR0_TEIE) )
+
+#define __ssi_enable_rx_intr() \
+ ( REG_SSI_CR0 |= SSI_CR0_RIE | SSI_CR0_REIE )
+
+#define __ssi_disable_rx_intr() \
+ ( REG_SSI_CR0 &= ~(SSI_CR0_RIE | SSI_CR0_REIE) )
+
+#define __ssi_enable_loopback() ( REG_SSI_CR0 |= SSI_CR0_LOOP )
+#define __ssi_disable_loopback() ( REG_SSI_CR0 &= ~SSI_CR0_LOOP )
+
+#define __ssi_enable_receive() ( REG_SSI_CR0 &= ~SSI_CR0_DISREV )
+#define __ssi_disable_receive() ( REG_SSI_CR0 |= SSI_CR0_DISREV )
+
+#define __ssi_finish_receive() \
+ ( REG_SSI_CR0 |= (SSI_CR0_RFINE | SSI_CR0_RFINC) )
+
+#define __ssi_disable_recvfinish() \
+ ( REG_SSI_CR0 &= ~(SSI_CR0_RFINE | SSI_CR0_RFINC) )
+
+#define __ssi_flush_txfifo() ( REG_SSI_CR0 |= SSI_CR0_TFLUSH )
+#define __ssi_flush_rxfifo() ( REG_SSI_CR0 |= SSI_CR0_RFLUSH )
+
+#define __ssi_flush_fifo() \
+ ( REG_SSI_CR0 |= SSI_CR0_TFLUSH | SSI_CR0_RFLUSH )
+
+#define __ssi_finish_transmit() ( REG_SSI_CR1 &= ~SSI_CR1_UNFIN )
+
+#define __ssi_spi_format() \
+do { \
+ REG_SSI_CR1 &= ~SSI_CR1_FMAT_MASK; \
+ REG_SSI_CR1 |= SSI_CR1_FMAT_SPI; \
+ REG_SSI_CR1 &= ~(SSI_CR1_TFVCK_MASK|SSI_CR1_TCKFI_MASK);\
+ REG_SSI_CR1 |= (SSI_CR1_TFVCK_1 | SSI_CR1_TCKFI_1); \
+} while (0)
+
+/* TI's SSP format, must clear SSI_CR1.UNFIN */
+#define __ssi_ssp_format() \
+do { \
+ REG_SSI_CR1 &= ~(SSI_CR1_FMAT_MASK | SSI_CR1_UNFIN); \
+ REG_SSI_CR1 |= SSI_CR1_FMAT_SSP; \
+} while (0)
+
+/* National's Microwire format, must clear SSI_CR0.RFINE, and set max delay */
+#define __ssi_microwire_format() \
+do { \
+ REG_SSI_CR1 &= ~SSI_CR1_FMAT_MASK; \
+ REG_SSI_CR1 |= SSI_CR1_FMAT_MW1; \
+ REG_SSI_CR1 &= ~(SSI_CR1_TFVCK_MASK|SSI_CR1_TCKFI_MASK);\
+ REG_SSI_CR1 |= (SSI_CR1_TFVCK_3 | SSI_CR1_TCKFI_3); \
+ REG_SSI_CR0 &= ~SSI_CR0_RFINE; \
+} while (0)
+
+/* CE# level (FRMHL), CE# in interval time (ITFRM),
+ clock phase and polarity (PHA POL),
+ interval time (SSIITR), interval characters/frame (SSIICR) */
+
+ /* frmhl,endian,mcom,flen,pha,pol MASK */
+#define SSICR1_MISC_MASK \
+ ( SSI_CR1_FRMHL_MASK | SSI_CR1_LFST | SSI_CR1_MCOM_MASK \
+ | SSI_CR1_FLEN_MASK | SSI_CR1_PHA | SSI_CR1_POL ) \
+
+#define __ssi_spi_set_misc(frmhl,endian,flen,mcom,pha,pol) \
+do { \
+ REG_SSI_CR1 &= ~SSICR1_MISC_MASK; \
+ REG_SSI_CR1 |= ((frmhl) << 30) | ((endian) << 25) | \
+ (((mcom) - 1) << 12) | (((flen) - 2) << 4) | \
+ ((pha) << 1) | (pol); \
+} while(0)
+
+/* Transfer with MSB or LSB first */
+#define __ssi_set_msb() ( REG_SSI_CR1 &= ~SSI_CR1_LFST )
+#define __ssi_set_lsb() ( REG_SSI_CR1 |= SSI_CR1_LFST )
+
+#define __ssi_set_frame_length(n) \
+ REG_SSI_CR1 = (REG_SSI_CR1 & ~SSI_CR1_FLEN_MASK) | (((n) - 2) << 4)
+
+/* n = 1 - 16 */
+#define __ssi_set_microwire_command_length(n) \
+ ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_MCOM_MASK) | SSI_CR1_MCOM_##n##BIT) )
+
+/* Set the clock phase for SPI */
+#define __ssi_set_spi_clock_phase(n) \
+ ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_PHA) | (n&0x1)) )
+
+/* Set the clock polarity for SPI */
+#define __ssi_set_spi_clock_polarity(n) \
+ ( REG_SSI_CR1 = ((REG_SSI_CR1 & ~SSI_CR1_POL) | (n&0x1)) )
+
+/* n = ix8 */
+#define __ssi_set_tx_trigger(n) \
+do { \
+ REG_SSI_CR1 &= ~SSI_CR1_TTRG_MASK; \
+ REG_SSI_CR1 |= SSI_CR1_TTRG_##n; \
+} while (0)
+
+/* n = ix8 */
+#define __ssi_set_rx_trigger(n) \
+do { \
+ REG_SSI_CR1 &= ~SSI_CR1_RTRG_MASK; \
+ REG_SSI_CR1 |= SSI_CR1_RTRG_##n; \
+} while (0)
+
+#define __ssi_get_txfifo_count() \
+ ( (REG_SSI_SR & SSI_SR_TFIFONUM_MASK) >> SSI_SR_TFIFONUM_BIT )
+
+#define __ssi_get_rxfifo_count() \
+ ( (REG_SSI_SR & SSI_SR_RFIFONUM_MASK) >> SSI_SR_RFIFONUM_BIT )
+
+#define __ssi_clear_errors() \
+ ( REG_SSI_SR &= ~(SSI_SR_UNDR | SSI_SR_OVER) )
+
+#define __ssi_transfer_end() ( REG_SSI_SR & SSI_SR_END )
+#define __ssi_is_busy() ( REG_SSI_SR & SSI_SR_BUSY )
+
+#define __ssi_txfifo_full() ( REG_SSI_SR & SSI_SR_TFF )
+#define __ssi_rxfifo_empty() ( REG_SSI_SR & SSI_SR_RFE )
+#define __ssi_rxfifo_noempty() ( REG_SSI_SR & SSI_SR_RFHF )
+
+#define __ssi_set_clk(dev_clk, ssi_clk) \
+ ( REG_SSI_GR = (dev_clk) / (2*(ssi_clk)) - 1 )
+
+#define __ssi_receive_data() REG_SSI_DR
+#define __ssi_transmit_data(v) ( REG_SSI_DR = (v) )
+
+
+/***************************************************************************
+ * CIM
+ ***************************************************************************/
+
+#define __cim_enable() ( REG_CIM_CTRL |= CIM_CTRL_ENA )
+#define __cim_disable() ( REG_CIM_CTRL &= ~CIM_CTRL_ENA )
+
+#define __cim_input_data_inverse() ( REG_CIM_CFG |= CIM_CFG_INV_DAT )
+#define __cim_input_data_normal() ( REG_CIM_CFG &= ~CIM_CFG_INV_DAT )
+
+#define __cim_vsync_active_low() ( REG_CIM_CFG |= CIM_CFG_VSP )
+#define __cim_vsync_active_high() ( REG_CIM_CFG &= ~CIM_CFG_VSP )
+
+#define __cim_hsync_active_low() ( REG_CIM_CFG |= CIM_CFG_HSP )
+#define __cim_hsync_active_high() ( REG_CIM_CFG &= ~CIM_CFG_HSP )
+
+#define __cim_sample_data_at_pclk_falling_edge() \
+ ( REG_CIM_CFG |= CIM_CFG_PCP )
+#define __cim_sample_data_at_pclk_rising_edge() \
+ ( REG_CIM_CFG &= ~CIM_CFG_PCP )
+
+#define __cim_enable_dummy_zero() ( REG_CIM_CFG |= CIM_CFG_DUMMY_ZERO )
+#define __cim_disable_dummy_zero() ( REG_CIM_CFG &= ~CIM_CFG_DUMMY_ZERO )
+
+#define __cim_select_external_vsync() ( REG_CIM_CFG |= CIM_CFG_EXT_VSYNC )
+#define __cim_select_internal_vsync() ( REG_CIM_CFG &= ~CIM_CFG_EXT_VSYNC )
+
+/* n=0-7 */
+#define __cim_set_data_packing_mode(n) \
+do { \
+ REG_CIM_CFG &= ~CIM_CFG_PACK_MASK; \
+ REG_CIM_CFG |= (CIM_CFG_PACK_##n); \
+} while (0)
+
+#define __cim_enable_ccir656_progressive_mode() \
+do { \
+ REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
+ REG_CIM_CFG |= CIM_CFG_DSM_CPM; \
+} while (0)
+
+#define __cim_enable_ccir656_interlace_mode() \
+do { \
+ REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
+ REG_CIM_CFG |= CIM_CFG_DSM_CIM; \
+} while (0)
+
+#define __cim_enable_gated_clock_mode() \
+do { \
+ REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
+ REG_CIM_CFG |= CIM_CFG_DSM_GCM; \
+} while (0)
+
+#define __cim_enable_nongated_clock_mode() \
+do { \
+ REG_CIM_CFG &= ~CIM_CFG_DSM_MASK; \
+ REG_CIM_CFG |= CIM_CFG_DSM_NGCM; \
+} while (0)
+
+/* sclk:system bus clock
+ * mclk: CIM master clock
+ */
+#define __cim_set_master_clk(sclk, mclk) \
+do { \
+ REG_CIM_CTRL &= ~CIM_CTRL_MCLKDIV_MASK; \
+ REG_CIM_CTRL |= (((sclk)/(mclk) - 1) << CIM_CTRL_MCLKDIV_BIT); \
+} while (0)
+
+#define __cim_enable_sof_intr() \
+ ( REG_CIM_CTRL |= CIM_CTRL_DMA_SOFM )
+#define __cim_disable_sof_intr() \
+ ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_SOFM )
+
+#define __cim_enable_eof_intr() \
+ ( REG_CIM_CTRL |= CIM_CTRL_DMA_EOFM )
+#define __cim_disable_eof_intr() \
+ ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_EOFM )
+
+#define __cim_enable_stop_intr() \
+ ( REG_CIM_CTRL |= CIM_CTRL_DMA_STOPM )
+#define __cim_disable_stop_intr() \
+ ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_STOPM )
+
+#define __cim_enable_trig_intr() \
+ ( REG_CIM_CTRL |= CIM_CTRL_RXF_TRIGM )
+#define __cim_disable_trig_intr() \
+ ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_TRIGM )
+
+#define __cim_enable_rxfifo_overflow_intr() \
+ ( REG_CIM_CTRL |= CIM_CTRL_RXF_OFM )
+#define __cim_disable_rxfifo_overflow_intr() \
+ ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_OFM )
+
+/* n=1-16 */
+#define __cim_set_frame_rate(n) \
+do { \
+ REG_CIM_CTRL &= ~CIM_CTRL_FRC_MASK; \
+ REG_CIM_CTRL |= CIM_CTRL_FRC_##n; \
+} while (0)
+
+#define __cim_enable_dma() ( REG_CIM_CTRL |= CIM_CTRL_DMA_EN )
+#define __cim_disable_dma() ( REG_CIM_CTRL &= ~CIM_CTRL_DMA_EN )
+
+#define __cim_reset_rxfifo() ( REG_CIM_CTRL |= CIM_CTRL_RXF_RST )
+#define __cim_unreset_rxfifo() ( REG_CIM_CTRL &= ~CIM_CTRL_RXF_RST )
+
+/* n=4,8,12,16,20,24,28,32 */
+#define __cim_set_rxfifo_trigger(n) \
+do { \
+ REG_CIM_CTRL &= ~CIM_CTRL_RXF_TRIG_MASK; \
+ REG_CIM_CTRL |= CIM_CTRL_RXF_TRIG_##n; \
+} while (0)
+
+#define __cim_clear_state() ( REG_CIM_STATE = 0 )
+
+#define __cim_disable_done() ( REG_CIM_STATE & CIM_STATE_VDD )
+#define __cim_rxfifo_empty() ( REG_CIM_STATE & CIM_STATE_RXF_EMPTY )
+#define __cim_rxfifo_reach_trigger() ( REG_CIM_STATE & CIM_STATE_RXF_TRIG )
+#define __cim_rxfifo_overflow() ( REG_CIM_STATE & CIM_STATE_RXF_OF )
+#define __cim_clear_rxfifo_overflow() ( REG_CIM_STATE &= ~CIM_STATE_RXF_OF )
+#define __cim_dma_stop() ( REG_CIM_STATE & CIM_STATE_DMA_STOP )
+#define __cim_dma_eof() ( REG_CIM_STATE & CIM_STATE_DMA_EOF )
+#define __cim_dma_sof() ( REG_CIM_STATE & CIM_STATE_DMA_SOF )
+
+#define __cim_get_iid() ( REG_CIM_IID )
+#define __cim_get_image_data() ( REG_CIM_RXFIFO )
+#define __cim_get_dam_cmd() ( REG_CIM_CMD )
+
+#define __cim_set_da(a) ( REG_CIM_DA = (a) )
+
+/***************************************************************************
+ * LCD
+ ***************************************************************************/
+#define __lcd_as_smart_lcd() ( REG_LCD_CFG |= (1<<LCD_CFG_LCDPIN_BIT) )
+#define __lcd_as_general_lcd() ( REG_LCD_CFG &= ~(1<<LCD_CFG_LCDPIN_BIT) )
+
+#define __lcd_set_dis() ( REG_LCD_CTRL |= LCD_CTRL_DIS )
+#define __lcd_clr_dis() ( REG_LCD_CTRL &= ~LCD_CTRL_DIS )
+
+#define __lcd_set_ena() ( REG_LCD_CTRL |= LCD_CTRL_ENA )
+#define __lcd_clr_ena() ( REG_LCD_CTRL &= ~LCD_CTRL_ENA )
+
+/* n=1,2,4,8,16 */
+#define __lcd_set_bpp(n) \
+ ( REG_LCD_CTRL = (REG_LCD_CTRL & ~LCD_CTRL_BPP_MASK) | LCD_CTRL_BPP_##n )
+
+/* n=4,8,16 */
+#define __lcd_set_burst_length(n) \
+do { \
+ REG_LCD_CTRL &= ~LCD_CTRL_BST_MASK; \
+ REG_LCD_CTRL |= LCD_CTRL_BST_n##; \
+} while (0)
+
+#define __lcd_select_rgb565() ( REG_LCD_CTRL &= ~LCD_CTRL_RGB555 )
+#define __lcd_select_rgb555() ( REG_LCD_CTRL |= LCD_CTRL_RGB555 )
+
+#define __lcd_set_ofup() ( REG_LCD_CTRL |= LCD_CTRL_OFUP )
+#define __lcd_clr_ofup() ( REG_LCD_CTRL &= ~LCD_CTRL_OFUP )
+
+/* n=2,4,16 */
+#define __lcd_set_stn_frc(n) \
+do { \
+ REG_LCD_CTRL &= ~LCD_CTRL_FRC_MASK; \
+ REG_LCD_CTRL |= LCD_CTRL_FRC_n##; \
+} while (0)
+
+
+#define __lcd_pixel_endian_little() ( REG_LCD_CTRL |= LCD_CTRL_PEDN )
+#define __lcd_pixel_endian_big() ( REG_LCD_CTRL &= ~LCD_CTRL_PEDN )
+
+#define __lcd_reverse_byte_endian() ( REG_LCD_CTRL |= LCD_CTRL_BEDN )
+#define __lcd_normal_byte_endian() ( REG_LCD_CTRL &= ~LCD_CTRL_BEDN )
+
+#define __lcd_enable_eof_intr() ( REG_LCD_CTRL |= LCD_CTRL_EOFM )
+#define __lcd_disable_eof_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_EOFM )
+
+#define __lcd_enable_sof_intr() ( REG_LCD_CTRL |= LCD_CTRL_SOFM )
+#define __lcd_disable_sof_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_SOFM )
+
+#define __lcd_enable_ofu_intr() ( REG_LCD_CTRL |= LCD_CTRL_OFUM )
+#define __lcd_disable_ofu_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_OFUM )
+
+#define __lcd_enable_ifu0_intr() ( REG_LCD_CTRL |= LCD_CTRL_IFUM0 )
+#define __lcd_disable_ifu0_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_IFUM0 )
+
+#define __lcd_enable_ifu1_intr() ( REG_LCD_CTRL |= LCD_CTRL_IFUM1 )
+#define __lcd_disable_ifu1_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_IFUM1 )
+
+#define __lcd_enable_ldd_intr() ( REG_LCD_CTRL |= LCD_CTRL_LDDM )
+#define __lcd_disable_ldd_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_LDDM )
+
+#define __lcd_enable_qd_intr() ( REG_LCD_CTRL |= LCD_CTRL_QDM )
+#define __lcd_disable_qd_intr() ( REG_LCD_CTRL &= ~LCD_CTRL_QDM )
+
+
+/* LCD status register indication */
+
+#define __lcd_quick_disable_done() ( REG_LCD_STATE & LCD_STATE_QD )
+#define __lcd_disable_done() ( REG_LCD_STATE & LCD_STATE_LDD )
+#define __lcd_infifo0_underrun() ( REG_LCD_STATE & LCD_STATE_IFU0 )
+#define __lcd_infifo1_underrun() ( REG_LCD_STATE & LCD_STATE_IFU1 )
+#define __lcd_outfifo_underrun() ( REG_LCD_STATE & LCD_STATE_OFU )
+#define __lcd_start_of_frame() ( REG_LCD_STATE & LCD_STATE_SOF )
+#define __lcd_end_of_frame() ( REG_LCD_STATE & LCD_STATE_EOF )
+
+#define __lcd_clr_outfifounderrun() ( REG_LCD_STATE &= ~LCD_STATE_OFU )
+#define __lcd_clr_sof() ( REG_LCD_STATE &= ~LCD_STATE_SOF )
+#define __lcd_clr_eof() ( REG_LCD_STATE &= ~LCD_STATE_EOF )
+
+#define __lcd_panel_white() ( REG_LCD_CFG |= LCD_CFG_WHITE )
+#define __lcd_panel_black() ( REG_LCD_CFG &= ~LCD_CFG_WHITE )
+
+/* n=1,2,4,8 for single mono-STN
+ * n=4,8 for dual mono-STN
+ */
+#define __lcd_set_panel_datawidth(n) \
+do { \
+ REG_LCD_CFG &= ~LCD_CFG_PDW_MASK; \
+ REG_LCD_CFG |= LCD_CFG_PDW_n##; \
+} while (0)
+
+/* m=LCD_CFG_MODE_GENERUIC_TFT_xxx */
+#define __lcd_set_panel_mode(m) \
+do { \
+ REG_LCD_CFG &= ~LCD_CFG_MODE_MASK; \
+ REG_LCD_CFG |= (m); \
+} while(0)
+
+/* n = 0-255 */
+#define __lcd_disable_ac_bias() ( REG_LCD_IO = 0xff )
+#define __lcd_set_ac_bias(n) \
+do { \
+ REG_LCD_IO &= ~LCD_IO_ACB_MASK; \
+ REG_LCD_IO |= ((n) << LCD_IO_ACB_BIT); \
+} while(0)
+
+#define __lcd_io_set_dir() ( REG_LCD_IO |= LCD_IO_DIR )
+#define __lcd_io_clr_dir() ( REG_LCD_IO &= ~LCD_IO_DIR )
+
+#define __lcd_io_set_dep() ( REG_LCD_IO |= LCD_IO_DEP )
+#define __lcd_io_clr_dep() ( REG_LCD_IO &= ~LCD_IO_DEP )
+
+#define __lcd_io_set_vsp() ( REG_LCD_IO |= LCD_IO_VSP )
+#define __lcd_io_clr_vsp() ( REG_LCD_IO &= ~LCD_IO_VSP )
+
+#define __lcd_io_set_hsp() ( REG_LCD_IO |= LCD_IO_HSP )
+#define __lcd_io_clr_hsp() ( REG_LCD_IO &= ~LCD_IO_HSP )
+
+#define __lcd_io_set_pcp() ( REG_LCD_IO |= LCD_IO_PCP )
+#define __lcd_io_clr_pcp() ( REG_LCD_IO &= ~LCD_IO_PCP )
+
+#define __lcd_vsync_get_vps() \
+ ( (REG_LCD_VSYNC & LCD_VSYNC_VPS_MASK) >> LCD_VSYNC_VPS_BIT )
+
+#define __lcd_vsync_get_vpe() \
+ ( (REG_LCD_VSYNC & LCD_VSYNC_VPE_MASK) >> LCD_VSYNC_VPE_BIT )
+#define __lcd_vsync_set_vpe(n) \
+do { \
+ REG_LCD_VSYNC &= ~LCD_VSYNC_VPE_MASK; \
+ REG_LCD_VSYNC |= (n) << LCD_VSYNC_VPE_BIT; \
+} while (0)
+
+#define __lcd_hsync_get_hps() \
+ ( (REG_LCD_HSYNC & LCD_HSYNC_HPS_MASK) >> LCD_HSYNC_HPS_BIT )
+#define __lcd_hsync_set_hps(n) \
+do { \
+ REG_LCD_HSYNC &= ~LCD_HSYNC_HPS_MASK; \
+ REG_LCD_HSYNC |= (n) << LCD_HSYNC_HPS_BIT; \
+} while (0)
+
+#define __lcd_hsync_get_hpe() \
+ ( (REG_LCD_HSYNC & LCD_HSYNC_HPE_MASK) >> LCD_VSYNC_HPE_BIT )
+#define __lcd_hsync_set_hpe(n) \
+do { \
+ REG_LCD_HSYNC &= ~LCD_HSYNC_HPE_MASK; \
+ REG_LCD_HSYNC |= (n) << LCD_HSYNC_HPE_BIT; \
+} while (0)
+
+#define __lcd_vat_get_ht() \
+ ( (REG_LCD_VAT & LCD_VAT_HT_MASK) >> LCD_VAT_HT_BIT )
+#define __lcd_vat_set_ht(n) \
+do { \
+ REG_LCD_VAT &= ~LCD_VAT_HT_MASK; \
+ REG_LCD_VAT |= (n) << LCD_VAT_HT_BIT; \
+} while (0)
+
+#define __lcd_vat_get_vt() \
+ ( (REG_LCD_VAT & LCD_VAT_VT_MASK) >> LCD_VAT_VT_BIT )
+#define __lcd_vat_set_vt(n) \
+do { \
+ REG_LCD_VAT &= ~LCD_VAT_VT_MASK; \
+ REG_LCD_VAT |= (n) << LCD_VAT_VT_BIT; \
+} while (0)
+
+#define __lcd_dah_get_hds() \
+ ( (REG_LCD_DAH & LCD_DAH_HDS_MASK) >> LCD_DAH_HDS_BIT )
+#define __lcd_dah_set_hds(n) \
+do { \
+ REG_LCD_DAH &= ~LCD_DAH_HDS_MASK; \
+ REG_LCD_DAH |= (n) << LCD_DAH_HDS_BIT; \
+} while (0)
+
+#define __lcd_dah_get_hde() \
+ ( (REG_LCD_DAH & LCD_DAH_HDE_MASK) >> LCD_DAH_HDE_BIT )
+#define __lcd_dah_set_hde(n) \
+do { \
+ REG_LCD_DAH &= ~LCD_DAH_HDE_MASK; \
+ REG_LCD_DAH |= (n) << LCD_DAH_HDE_BIT; \
+} while (0)
+
+#define __lcd_dav_get_vds() \
+ ( (REG_LCD_DAV & LCD_DAV_VDS_MASK) >> LCD_DAV_VDS_BIT )
+#define __lcd_dav_set_vds(n) \
+do { \
+ REG_LCD_DAV &= ~LCD_DAV_VDS_MASK; \
+ REG_LCD_DAV |= (n) << LCD_DAV_VDS_BIT; \
+} while (0)
+
+#define __lcd_dav_get_vde() \
+ ( (REG_LCD_DAV & LCD_DAV_VDE_MASK) >> LCD_DAV_VDE_BIT )
+#define __lcd_dav_set_vde(n) \
+do { \
+ REG_LCD_DAV &= ~LCD_DAV_VDE_MASK; \
+ REG_LCD_DAV |= (n) << LCD_DAV_VDE_BIT; \
+} while (0)
+
+#define __lcd_cmd0_set_sofint() ( REG_LCD_CMD0 |= LCD_CMD_SOFINT )
+#define __lcd_cmd0_clr_sofint() ( REG_LCD_CMD0 &= ~LCD_CMD_SOFINT )
+#define __lcd_cmd1_set_sofint() ( REG_LCD_CMD1 |= LCD_CMD_SOFINT )
+#define __lcd_cmd1_clr_sofint() ( REG_LCD_CMD1 &= ~LCD_CMD_SOFINT )
+
+#define __lcd_cmd0_set_eofint() ( REG_LCD_CMD0 |= LCD_CMD_EOFINT )
+#define __lcd_cmd0_clr_eofint() ( REG_LCD_CMD0 &= ~LCD_CMD_EOFINT )
+#define __lcd_cmd1_set_eofint() ( REG_LCD_CMD1 |= LCD_CMD_EOFINT )
+#define __lcd_cmd1_clr_eofint() ( REG_LCD_CMD1 &= ~LCD_CMD_EOFINT )
+
+#define __lcd_cmd0_set_pal() ( REG_LCD_CMD0 |= LCD_CMD_PAL )
+#define __lcd_cmd0_clr_pal() ( REG_LCD_CMD0 &= ~LCD_CMD_PAL )
+
+#define __lcd_cmd0_get_len() \
+ ( (REG_LCD_CMD0 & LCD_CMD_LEN_MASK) >> LCD_CMD_LEN_BIT )
+#define __lcd_cmd1_get_len() \
+ ( (REG_LCD_CMD1 & LCD_CMD_LEN_MASK) >> LCD_CMD_LEN_BIT )
+
+/***************************************************************************
+ * RTC ops
+ ***************************************************************************/
+
+#define __rtc_write_ready() ( REG_RTC_RCR & RTC_RCR_WRDY )
+#define __rtc_enabled() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR |= RTC_RCR_RTCE ; \
+}while(0) \
+
+#define __rtc_disabled() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_RTCE; \
+}while(0)
+#define __rtc_enable_alarm() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR |= RTC_RCR_AE; \
+}while(0)
+
+#define __rtc_disable_alarm() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_AE; \
+}while(0)
+
+#define __rtc_enable_alarm_irq() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR |= RTC_RCR_AIE; \
+}while(0)
+
+#define __rtc_disable_alarm_irq() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_AIE; \
+}while(0)
+#define __rtc_enable_Hz_irq() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR |= RTC_RCR_HZIE; \
+}while(0)
+
+#define __rtc_disable_Hz_irq() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_HZIE; \
+}while(0)
+#define __rtc_get_1Hz_flag() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ((REG_RTC_RCR >> RTC_RCR_HZ) & 0x1); \
+}while(0)
+#define __rtc_clear_1Hz_flag() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_HZ; \
+}while(0)
+#define __rtc_get_alarm_flag() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ((REG_RTC_RCR >> RTC_RCR_AF) & 0x1) \
+while(0)
+#define __rtc_clear_alarm_flag() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RCR &= ~RTC_RCR_AF; \
+}while(0)
+#define __rtc_get_second() \
+do{ \
+ while(!__rtc_write_ready());\
+ REG_RTC_RSR; \
+}while(0)
+
+#define __rtc_set_second(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RSR = v; \
+}while(0)
+
+#define __rtc_get_alarm_second() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RSAR; \
+}while(0)
+
+
+#define __rtc_set_alarm_second(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RSAR = v; \
+}while(0)
+
+#define __rtc_RGR_is_locked() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RGR >> RTC_RGR_LOCK; \
+}while(0)
+#define __rtc_lock_RGR() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RGR |= RTC_RGR_LOCK; \
+}while(0)
+
+#define __rtc_unlock_RGR() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_RGR &= ~RTC_RGR_LOCK; \
+}while(0)
+
+#define __rtc_get_adjc_val() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_RGR & RTC_RGR_ADJC_MASK) >> RTC_RGR_ADJC_BIT ); \
+}while(0)
+#define __rtc_set_adjc_val(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_RGR = ( (REG_RTC_RGR & ~RTC_RGR_ADJC_MASK) | (v << RTC_RGR_ADJC_BIT) )) \
+}while(0)
+
+#define __rtc_get_nc1Hz_val() \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_RGR & RTC_RGR_NC1HZ_MASK) >> RTC_RGR_NC1HZ_BIT )
+
+#define __rtc_set_nc1Hz_val(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_RGR = ( (REG_RTC_RGR & ~RTC_RGR_NC1HZ_MASK) | (v << RTC_RGR_NC1HZ_BIT) )) \
+}while(0)
+#define __rtc_power_down() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_HCR |= RTC_HCR_PD; \
+}while(0)
+
+#define __rtc_get_hwfcr_val() \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_HWFCR & RTC_HWFCR_MASK; \
+}while(0)
+#define __rtc_set_hwfcr_val(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ REG_RTC_HWFCR = (v) & RTC_HWFCR_MASK; \
+}while(0)
+
+#define __rtc_get_hrcr_val() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_HRCR & RTC_HRCR_MASK ); \
+}while(0)
+#define __rtc_set_hrcr_val(v) \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_HRCR = (v) & RTC_HRCR_MASK ); \
+}while(0)
+
+#define __rtc_enable_alarm_wakeup() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_HWCR |= RTC_HWCR_EALM ); \
+}while(0)
+
+#define __rtc_disable_alarm_wakeup() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_HWCR &= ~RTC_HWCR_EALM ); \
+}while(0)
+
+#define __rtc_status_hib_reset_occur() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_HWRSR >> RTC_HWRSR_HR) & 0x1 ); \
+}while(0)
+#define __rtc_status_ppr_reset_occur() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_HWRSR >> RTC_HWRSR_PPR) & 0x1 ); \
+}while(0)
+#define __rtc_status_wakeup_pin_waken_up() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_HWRSR >> RTC_HWRSR_PIN) & 0x1 ); \
+}while(0)
+#define __rtc_status_alarm_waken_up() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( (REG_RTC_HWRSR >> RTC_HWRSR_ALM) & 0x1 ); \
+}while(0)
+#define __rtc_clear_hib_stat_all() \
+do{ \
+ while(!__rtc_write_ready()); \
+ ( REG_RTC_HWRSR = 0 ); \
+}while(0)
+
+#define __rtc_get_scratch_pattern() \
+ while(!__rtc_write_ready()); \
+ (REG_RTC_HSPR)
+#define __rtc_set_scratch_pattern(n) \
+do{ \
+ while(!__rtc_write_ready()); \
+ (REG_RTC_HSPR = n ); \
+}while(0)
+
+
+#endif /* !__ASSEMBLY__ */
+
+#endif /* __JZ4740_H__ */
--- /dev/null
+#ifndef __CONFIG_AVT2_H
+#define __CONFIG_AVT2_H
+
+#include <configs/nanonote.h>
+
+#define CONFIG_AVT2 1
+
+#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait avt2=1"
+#define CONFIG_BOOTARGSFROMSD "mem=64M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait avt2=1"
+#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
+
+/* SDRAM paramters */
+#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
+#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
+#define SDRAM_ROW 13 /* Row address: 11 to 13 */
+#define SDRAM_COL 10 /* Column address: 8 to 12 */
+#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
+
+/* SDRAM Timings, unit: ns */
+#define SDRAM_TRAS 45 /* RAS# Active Time */
+#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
+#define SDRAM_TPC 20 /* RAS# Precharge Time */
+#define SDRAM_TRWL 7 /* Write Latency Time */
+#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
+
+#endif /* __CONFIG_AVT_H */
--- /dev/null
+/*
+ * (C) Copyright 2006
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+/*
+ * This file contains the configuration parameters for the pavo board.
+ */
+
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+//#define DEBUG
+//#define DEBUG_SHELL
+
+#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
+#define CONFIG_JzRISC 1 /* JzRISC core */
+#define CONFIG_JZSOC 1 /* Jz SoC */
+#define CONFIG_JZ4740 1 /* Jz4740 SoC */
+#define CONFIG_PAVO 1 /* PAVO validation board */
+
+#define CONFIG_BOARD_NAME "n516"
+#define CONFIG_BOARD_HWREV "1.0"
+#define CONFIG_FIRMWARE_EPOCH "0"
+#define CONFIG_UPDATE_TMPBUF 0x80600000
+#define CONFIG_UPDATE_CHUNKSIZE 0x800000
+#define CONFIG_UPDATE_FILENAME "update.oifw"
+#define CONFIG_UPDATE_FILEEXT ".oifw"
+#define CONFIG_UBI_PARTITION "UBI"
+
+#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#undef CONFIG_SKIP_RELOCATE_UBOOT
+
+#if 0
+#define CONFIG_LCD /* LCD support */
+#define CONFIG_JZLCD_METRONOME_800x600
+#define LCD_BPP LCD_COLOR8
+
+#define WFM_DATA_SIZE ( 1 << 14 )
+#define CONFIG_METRONOME_WF_LEN (64 * (1 << 10))
+#define CONFIG_METRONOME_WF_NAND_OFFSET (0x100000)
+#define BMP_LOGO_HEIGHT 0
+#define CONFIG_UBI_WF_VOLUME "waveforms"
+#define CONFIG_UBI_BOOTSPLASH_VOLUME "bootsplash"
+#define CONFIG_METRONOME_BOOTSPLASH_LEN 480000
+#endif
+
+#if 0
+#define CONFIG_JZSOC_I2C
+#define CONFIG_HARD_I2C
+#define CONFIG_SYS_I2C_SPEED 100000
+#define CONFIG_SYS_I2C_SLAVE 0
+#define CONFIG_LPC_I2C_ADDR 0x54
+#endif
+
+#define JZ4740_NORBOOT_CFG JZ4740_NORBOOT_16BIT /* NOR Boot config code */
+#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3 /* NAND Boot config code */
+
+#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
+#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
+#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL/256) /* incrementer freq */
+
+#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
+
+#define CONFIG_BAUDRATE 57600
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+
+#define CONFIG_MMC 1
+#define CONFIG_GENERIC_MMC 1
+#define CONFIG_JZ_MMC 1
+#define CONFIG_FAT 1
+
+#define CONFIG_SYS_HUSH_PARSER
+#define CONFIG_SYS_PROMPT_HUSH_PS2 ">"
+#define CONFIG_CMDLINE_EDITING
+
+/* allow to overwrite serial and ethaddr */
+#define CONFIG_ENV_OVERWRITE
+
+#include <config_cmd_default.h>
+
+#undef CONFIG_CMD_BDI /* bdinfo */
+#undef CONFIG_CMD_FPGA
+#undef CONFIG_CMD_ECHO /* echo arguments */
+#undef CONFIG_CMD_FLASH /* flinfo, erase, protect */
+#undef CONFIG_CMD_FPGA /* FPGA configuration Support */
+#undef CONFIG_CMD_IMI /* iminfo */
+#undef CONFIG_CMD_ITEST /* Integer (and string) test */
+#undef CONFIG_CMD_LOADB /* loadb */
+#undef CONFIG_CMD_LOADS /* loads */
+#undef CONFIG_CMD_NFS /* NFS support */
+#undef CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#undef CONFIG_CMD_SOURCE /* "source" command support */
+#undef CONFIG_CMD_XIMG /* Load part of Multi Image */
+#undef CONFIG_CMD_NET
+
+//#define CONFIG_CMD_ASKENV
+//#define CONFIG_CMD_DHCP
+//#define CONFIG_CMD_PING
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+/*#define CONFIG_CMD_UBI*/
+/*#define CONFIG_CMD_MTDPARTS*/
+//#define CONFIG_CMD_JFFS2
+//#define CONFIG_JFFS2_NAND
+//#define CONFIG_JFFS2_CMDLINE
+#define CONFIG_CMD_UPDATE
+
+#define CONFIG_DOS_PARTITION
+
+/*#define CONFIG_MTD_PARTITIONS*/
+#define CONFIG_RBTREE
+
+#define CONFIG_BOOTP_MASK ( CONFIG_BOOTP_DEFAUL )
+
+/* this must be included AFTER the definition of CONFIG_COMMANDS (if any) */
+#if 0
+#define CONFIG_ZERO_BOOTDELAY_CHECK
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_BOOTFILE uImage /* file to load */
+#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ip=off rootfstype=ubifs root=ubi:rootfs ubi.mtd=UBI rw panic=5 " MTDPARTS_DEFAULT
+#define CONFIG_BOOTCOMMAND "check_and_update; setenv bootargs $bootargs $batt_level_param; ubi read 0x80600000 bootsplash && show_image 0x80600000; ubi read 0x80600000 kernel; bootm 0x80600000; ubi read 0x80600000 errorsplash && show_image 0x80600000; while test 0 = 0; do check_and_update; done"
+#define CONFIG_SYS_AUTOLOAD "n" /* No autoload */
+#define CONFIG_IPADDR 192.168.111.1
+#define CONFIG_SERVERIP 192.168.111.2
+#define MTDIDS_DEFAULT "nand0=jz4740-nand"
+#define MTDPARTS_DEFAULT "mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)"
+#define CONFIG_EXTRA_ENV_SETTINGS "mtdids=nand0=jz4740-nand\0mtdparts=mtdparts=jz4740-nand:1M@0(uboot)ro,-@1M(UBI)\0" \
+ "stdout=serial\0stderr=lcd\0"
+#endif
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_BOOTFILE "uImage" /* file to load */
+#define CONFIG_BOOTARGS "mem=64M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
+
+
+
+#define CONFIG_SYS_CONSOLE_IS_IN_ENV
+
+/*
+ * Serial download configuration
+ *
+ */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "n516 # " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) /* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
+
+#define CONFIG_SYS_MALLOC_LEN 1024*1024*2
+#define CONFIG_SYS_BOOTPARAMS_LEN 128*1024
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+
+#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
+
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
+
+/*-----------------------------------------------------------------------
+ * Environment
+ *----------------------------------------------------------------------*/
+#if !defined(CONFIG_NAND_U_BOOT) && !defined(CONFIG_NAND_SPL)
+#define CONFIG_ENV_IS_IN_FLASH 1 /* use FLASH for environment vars */
+#else
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+#endif
+
+/*-----------------------------------------------------------------------
+ * NAND FLASH configuration
+ */
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_BASE 0xB8000000
+#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl. chips */
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 8k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ */
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST /* Start NUB from this addr */
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
+
+#define CONFIG_SYS_NAND_PAGE_SIZE 2048
+#define CONFIG_SYS_NAND_BLOCK_SIZE (128 << 10) /* NAND chip block size */
+#define CONFIG_SYS_NAND_BADBLOCK_PAGE 63 /* NAND bad block was marked at this page in a block, starting from 0 */
+#define CONFIG_SYS_NAND_ECC_POS 6
+
+#ifdef CONFIG_ENV_IS_IN_NAND
+//#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_SIZE (128 * 1024)
+//#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE) /* environment starts here */
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_U_BOOT_OFFS)
+//#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+#endif
+
+
+/*-----------------------------------------------------------------------
+ * NOR FLASH and environment organization
+ */
+#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* max number of memory banks */
+#define CONFIG_SYS_MAX_FLASH_SECT (128) /* max number of sectors on one chip */
+
+#define PHYS_FLASH_1 0xa8000000 /* Flash Bank #1 */
+
+/* The following #defines are needed to get flash environment right */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/
+#define CONFIG_SYS_SYS_MONITOR_BASE TEXT_BASE /* in pavo/config.mk TEXT_BASE=0x88000000*/
+#define CONFIG_SYS_MONITOR_LEN (256*1024) /* Reserve 256 kB for Monitor */
+
+#define CONFIG_SYS_FLASH_BASE PHYS_FLASH_1
+
+/* timeout values are in ticks */
+#define CONFIG_SYS_FLASH_ERASE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Erase */
+#define CONFIG_SYS_FLASH_WRITE_TOUT (2 * CONFIG_SYS_HZ) /* Timeout for Flash Write */
+
+#ifdef CONFIG_ENV_IS_IN_FLASH
+#define CONFIG_ENV_IS_NOWHERE 1
+#define CONFIG_ENV_ADDR 0xa8040000
+#define CONFIG_ENV_SIZE 0x20000
+#endif
+
+/*-----------------------------------------------------------------------
+ * SDRAM Info.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+// SDRAM paramters
+#define SDRAM_BW16 0 /* Data bus width: 0-32bit, 1-16bit */
+#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
+#define SDRAM_ROW 13 /* Row address: 11 to 13 */
+#define SDRAM_COL 9 /* Column address: 8 to 12 */
+#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
+
+// SDRAM Timings, unit: ns
+#define SDRAM_TRAS 45 /* RAS# Active Time */
+#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
+#define SDRAM_TPC 20 /* RAS# Precharge Time */
+#define SDRAM_TRWL 7 /* Write Latency Time */
+#define SDRAM_TREF 15625 /* Refresh period: 4096 refresh cycles/64ms */
+
+/*-----------------------------------------------------------------------
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/*-----------------------------------------------------------------------
+ * GPIO definition
+ */
+#define GPIO_SD_VCC_EN_N 113 /* GPD17 */
+#define GPIO_SD_CD_N 103 /* GPD7 */
+#define GPIO_SD_WP 111 /* GPD15 */
+#define GPIO_USB_DETE 115 /* GPD6 */
+//#define GPIO_DC_DETE_N 103 /* GPD7 */
+#define GPIO_CHARG_STAT_N 112 /* GPD15 */
+#define GPIO_DISP_OFF_N 97 /* GPD1 */
+#define GPIO_UDC_HOTPLUG 100 /* GPD4 */
+#define GPIO_LED_EN 124 /* GPD28 */
+
+#define GPIO_RST_L 50 /* GPB18 LCD_SPL */
+#define GPIO_LCDRDY 49 /* GPB17 LCD_CLS */
+#define GPIO_STBY 86 /* GPC22 LCD_PS */
+#define GPIO_ERR 87 /* GPC23 LCD_REV */
+
+#endif /* __CONFIG_H */
--- /dev/null
+/*
+ * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This file contains the configuration parameters for the NanoNote.
+ */
+#ifndef __CONFIG_NANONOTE_H
+#define __CONFIG_NANONOTE_H
+
+#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
+#define CONFIG_JzRISC 1 /* JzRISC core */
+#define CONFIG_JZSOC 1 /* Jz SoC */
+#define CONFIG_JZ4740 1 /* Jz4740 SoC */
+#define CONFIG_NANONOTE 1
+
+#define CONFIG_LCD 1 /* LCD support */
+#define LCD_BPP LCD_COLOR32 /*5:18,24,32 bits per pixel */
+#define CONFIG_SYS_WHITE_ON_BLACK 1
+
+#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
+#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
+#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
+#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
+
+#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
+#define CONFIG_BAUDRATE 57600
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_MMC 1
+#define CONFIG_FAT 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_ENV_OVERWRITE 1
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
+#define CONFIG_BOOTDELAY 0
+#define CONFIG_BOOTFILE "uImage" /* file to load */
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_ECHO /* echo arguments */
+
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command support */
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+/*
+ * Serial download configuration
+ */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "QI# " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
+
+#define CONFIG_SYS_MALLOC_LEN 896 * 1024
+#define CONFIG_SYS_BOOTPARAMS_LEN 128 * 1024
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+
+/*
+ * NAND FLASH configuration
+ */
+/* NAND Boot config code */
+#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
+
+#define NANONOTE_NAND_SIZE 2 /* if board nand flash is 1GB, set to 1
+ * if board nand flash is 2GB, set to 2
+ * for change the PAGE_SIZE and BLOCK_SIZE
+ * will delete when there is no 1GB flash
+ */
+
+#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * NANONOTE_NAND_SIZE)
+/* nand chip block size */
+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * NANONOTE_NAND_SIZE << 10)
+/* nand bad block was marked at this page in a block, start from 0 */
+#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
+/* ECC offset position in oob area, default value is 6 if it isn't defined */
+#define CONFIG_SYS_NAND_ECC_POS (6 * NANONOTE_NAND_SIZE)
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_BASE 0xB8000000
+#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
+#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 8k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ */
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+/* Start NUB from this addr*/
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
+
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE)
+/* environment starts here */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+
+/* in board/nanonote/config.mk TEXT_BAS = 0x88000000 */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+
+/*
+ * SDRAM Info.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+/*
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/*
+ * GPIO definition
+ */
+#define GPIO_LCD_CS (2 * 32 + 21)
+#define GPIO_DISP_OFF_N (3 * 32 + 21)
+#define GPIO_PWM (3 * 32 + 27)
+
+#define GPIO_AMP_EN (3 * 32 + 4)
+
+#define GPIO_SDPW_EN (3 * 32 + 2)
+#define GPIO_SD_DETECT (3 * 32 + 0)
+
+#define GPIO_USB_DETECT (3 * 32 + 27)
+#define GPIO_BUZZ_PWM (3 * 32 + 28)
+
+#define GPIO_AUDIO_POP (1 * 32 + 29)
+#define GPIO_COB_TEST (1 * 32 + 30)
+
+#define GPIO_KEYOUT_BASE (2 * 32 + 10)
+#define GPIO_KEYIN_BASE (3 * 32 + 18)
+#define GPIO_KEYIN_8 (3 * 32 + 26)
+
+#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
+#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
+
+#endif /* __CONFIG_NANONOTE_H */
--- /dev/null
+#ifndef __CONFIG_QI_LB60_H
+#define __CONFIG_QI_LB60_H
+
+#include <configs/nanonote.h>
+
+#define CONFIG_QI_LB60 1
+
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+#define CONFIG_BOOTARGSFROMSD "mem=32M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p2 rw rootwait"
+#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
+#define CONFIG_BOOTCOMMANDFROMSD "mmc init; fatload mmc 0 0x80600000 uImage; bootm"
+
+/* SDRAM paramters */
+#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
+#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
+#define SDRAM_ROW 13 /* Row address: 11 to 13 */
+#define SDRAM_COL 9 /* Column address: 8 to 12 */
+#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
+
+/* SDRAM Timings, unit: ns */
+#define SDRAM_TRAS 45 /* RAS# Active Time */
+#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
+#define SDRAM_TPC 20 /* RAS# Precharge Time */
+#define SDRAM_TRWL 7 /* Write Latency Time */
+#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
+
+#endif
--- /dev/null
+/*
+ * Authors: Xiangfu Liu <xiangfu.z@gmail.com>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version
+ * 3 of the License, or (at your option) any later version.
+ */
+
+/*
+ * This file contains the configuration parameters for SAKC.
+ */
+#ifndef __CONFIG_H
+#define __CONFIG_H
+
+#define DEBUG
+#define CONFIG_MIPS32 1 /* MIPS32 CPU core */
+#define CONFIG_JzRISC 1 /* JzRISC core */
+#define CONFIG_JZSOC 1 /* Jz SoC */
+#define CONFIG_JZ4725 1 /* Jz4725 SoC */
+#define CONFIG_JZ4740 1 /* Jz4740 SoC */
+#define CONFIG_SAKC 1 /* SAKC board */
+
+#define MMC_BUS_WIDTH_1BIT 1 /* 1 for MMC 1Bit Bus Width */
+
+//#define CONFIG_LCD 1 /* LCD support */
+//#define LCD_BPP LCD_COLOR32 /*5:18,24,32 bits per pixel */
+//#define CONFIG_SYS_WHITE_ON_BLACK 1
+
+#define CONFIG_SYS_CPU_SPEED 336000000 /* CPU clock: 336 MHz */
+#define CONFIG_SYS_EXTAL 12000000 /* EXTAL freq: 12 MHz */
+#define CONFIG_SYS_HZ (CONFIG_SYS_EXTAL / 256) /* incrementer freq */
+#define CONFIG_SYS_MIPS_TIMER_FREQ CONFIG_SYS_CPU_SPEED
+
+#define CONFIG_SYS_UART_BASE UART0_BASE /* Base of the UART channel */
+#define CONFIG_BAUDRATE 57600
+#define CONFIG_SYS_BAUDRATE_TABLE { 9600, 19200, 38400, 57600, 115200 }
+
+#define CONFIG_MMC 1
+#define CONFIG_FAT 1
+#define CONFIG_DOS_PARTITION 1
+#define CONFIG_SKIP_LOWLEVEL_INIT 1
+#define CONFIG_BOARD_EARLY_INIT_F 1
+#define CONFIG_SYS_NO_FLASH 1
+#define CONFIG_ENV_OVERWRITE 1
+
+#define CONFIG_BOOTP_MASK (CONFIG_BOOTP_DEFAUL)
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_BOOTFILE "uImage" /* file to load */
+#define CONFIG_BOOTARGS "mem=32M console=ttyS0,57600n8 ubi.mtd=2 rootfstype=ubifs root=ubi0:rootfs rw rootwait"
+#define CONFIG_EXTRA_ENV_SETTINGS 1
+#define CONFIG_BOOTARGSFROMSD "mem=32M console=ttyS0,57600n8 rootfstype=ext2 root=/dev/mmcblk0p1 rw rootwait"
+#define CONFIG_BOOTCOMMAND "nand read 0x80600000 0x400000 0x200000;bootm"
+
+/*
+ * Command line configuration.
+ */
+#define CONFIG_CMD_BDI /* bdinfo */
+#define CONFIG_CMD_BOOTD /* bootd */
+#define CONFIG_CMD_CONSOLE /* coninfo */
+#define CONFIG_CMD_ECHO /* echo arguments */
+#define CONFIG_CMD_IMI /* iminfo */
+#define CONFIG_CMD_ITEST /* Integer (and string) test */
+
+#define CONFIG_CMD_LOADB /* loadb */
+#define CONFIG_CMD_LOADS /* loads */
+#define CONFIG_CMD_MEMORY /* md mm nm mw cp cmp crc base loop mtest */
+#define CONFIG_CMD_MISC /* Misc functions like sleep etc*/
+#define CONFIG_CMD_RUN /* run command in env variable */
+#define CONFIG_CMD_SAVEENV /* saveenv */
+#define CONFIG_CMD_SETGETDCR /* DCR support on 4xx */
+#define CONFIG_CMD_SOURCE /* "source" command support */
+#define CONFIG_CMD_XIMG /* Load part of Multi Image */
+
+#define CONFIG_CMD_NAND
+#define CONFIG_CMD_MMC
+#define CONFIG_CMD_FAT
+
+/*
+ * Serial download configuration
+ */
+#define CONFIG_LOADS_ECHO 1 /* echo on for serial download */
+#define CONFIG_LOADS_BAUD_CHANGE 1 /* allow baudrate change */
+
+/*
+ * Miscellaneous configurable options
+ */
+#define CONFIG_SYS_LONGHELP /* undef to save memory */
+#define CONFIG_SYS_PROMPT "SAKC# " /* Monitor Command Prompt */
+#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */
+#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)
+/* Print Buffer Size */
+#define CONFIG_SYS_MAXARGS 16 /* max number of command args*/
+
+#define CONFIG_SYS_MALLOC_LEN 128 * 1024
+#define CONFIG_SYS_BOOTPARAMS_LEN 128 * 1024
+
+#define CONFIG_SYS_SDRAM_BASE 0x80000000 /* Cached addr */
+#define CONFIG_SYS_INIT_SP_OFFSET 0x400000
+#define CONFIG_SYS_LOAD_ADDR 0x80600000 /* default load address */
+#define CONFIG_SYS_MEMTEST_START 0x80100000
+#define CONFIG_SYS_MEMTEST_END 0x80800000
+
+/*
+ * Environment
+ */
+#define CONFIG_ENV_IS_IN_NAND 1 /* use NAND for environment vars */
+
+/*
+ * NAND FLASH configuration
+ */
+/* NAND Boot config code */
+#define JZ4740_NANDBOOT_CFG JZ4740_NANDBOOT_B8R3
+
+#define SAKC_NAND_SIZE 1 /* if board nand flash is 1GB, set to 1
+ * if board nand flash is 2GB, set to 2
+ * for change the PAGE_SIZE and BLOCK_SIZE
+ * will delete when there is no 1GB flash
+ */
+
+#define CONFIG_SYS_NAND_PAGE_SIZE (2048 * SAKC_NAND_SIZE)
+/* nand chip block size */
+#define CONFIG_SYS_NAND_BLOCK_SIZE (256 * SAKC_NAND_SIZE << 10)
+/* nand bad block was marked at this page in a block, start from 0 */
+#define CONFIG_SYS_NAND_BADBLOCK_PAGE 127
+/* ECC offset position in oob area, default value is 6 if it isn't defined */
+#define CONFIG_SYS_NAND_ECC_POS (6 * SAKC_NAND_SIZE)
+#define CONFIG_SYS_MAX_NAND_DEVICE 1
+#define NAND_MAX_CHIPS 1
+#define CONFIG_SYS_NAND_BASE 0xB8000000
+#define CONFIG_SYS_NAND_SELECT_DEVICE 1 /* nand driver supports mutipl.*/
+#define CONFIG_SYS_ONENAND_BASE CONFIG_SYS_NAND_BASE
+
+/*
+ * IPL (Initial Program Loader, integrated inside CPU)
+ * Will load first 8k from NAND (SPL) into cache and execute it from there.
+ *
+ * SPL (Secondary Program Loader)
+ * Will load special U-Boot version (NUB) from NAND and execute it. This SPL
+ * has to fit into 8kByte. It sets up the CPU and configures the SDRAM
+ * controller and the NAND controller so that the special U-Boot image can be
+ * loaded from NAND to SDRAM.
+ *
+ * NUB (NAND U-Boot)
+ * This NAND U-Boot (NUB) is a special U-Boot version which can be started
+ * from RAM. Therefore it mustn't (re-)configure the SDRAM controller.
+ *
+ */
+#define CONFIG_SYS_NAND_U_BOOT_DST 0x80100000 /* Load NUB to this addr */
+#define CONFIG_SYS_NAND_U_BOOT_START CONFIG_SYS_NAND_U_BOOT_DST
+/* Start NUB from this addr*/
+
+/*
+ * Define the partitioning of the NAND chip (only RAM U-Boot is needed here)
+ */
+#define CONFIG_SYS_NAND_U_BOOT_OFFS (256 << 10) /* Offset to RAM U-Boot image */
+#define CONFIG_SYS_NAND_U_BOOT_SIZE (512 << 10) /* Size of RAM U-Boot image */
+
+#define CONFIG_ENV_SIZE CONFIG_SYS_NAND_BLOCK_SIZE
+#define CONFIG_ENV_OFFSET (CONFIG_SYS_NAND_BLOCK_SIZE + CONFIG_SYS_NAND_U_BOOT_SIZE + CONFIG_SYS_NAND_BLOCK_SIZE)
+/* environment starts here */
+#define CONFIG_ENV_OFFSET_REDUND (CONFIG_ENV_OFFSET + CONFIG_ENV_SIZE)
+
+/* in qi_lb60.h/config.mk TEXT_BAS = 0x88000000 */
+#define CONFIG_SYS_MONITOR_BASE TEXT_BASE
+
+/*
+ * SDRAM Info.
+ */
+#define CONFIG_NR_DRAM_BANKS 1
+
+/* SDRAM paramters */
+#define SDRAM_BW16 1 /* Data bus width: 0-32bit, 1-16bit */
+#define SDRAM_BANK4 1 /* Banks each chip: 0-2bank, 1-4bank */
+#define SDRAM_ROW 13 /* Row address: 11 to 13 */
+#define SDRAM_COL 9 /* Column address: 8 to 12 */
+#define SDRAM_CASL 2 /* CAS latency: 2 or 3 */
+
+/* SDRAM Timings, unit: ns */
+#define SDRAM_TRAS 45 /* RAS# Active Time */
+#define SDRAM_RCD 20 /* RAS# to CAS# Delay */
+#define SDRAM_TPC 20 /* RAS# Precharge Time */
+#define SDRAM_TRWL 7 /* Write Latency Time */
+#define SDRAM_TREF 15625 /* Refresh period: 8192 cycles/64ms */
+
+/*
+ * Cache Configuration
+ */
+#define CONFIG_SYS_DCACHE_SIZE 16384
+#define CONFIG_SYS_ICACHE_SIZE 16384
+#define CONFIG_SYS_CACHELINE_SIZE 32
+
+/*
+ * GPIO definition
+ */
+#define GPIO_SD_DETECT (2 * 32 + 27)
+#define GPIO_SD_CD_N GPIO_SD_DETECT /* SD Card insert detect */
+#define GPIO_SD_VCC_EN_N GPIO_SDPW_EN /* SD Card Power Enable */
+
+#endif /* __CONFIG_H */
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o usb_boot.o
+COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
+ dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
+ cat $< $(nandobj)junk1 > $(nandobj)junk2
+ dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
+ cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
+ dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
+ cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
+ dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
+ rm -f $(nandobj)junk*
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
+
+$(obj)usb_boot.S:
+ @rm -f $(obj)usb_boot.S
+ ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
+
+$(obj)cpu.c:
+ @rm -f $(obj)cpu.c
+ ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
+
+$(obj)jz4740.c:
+ @rm -f $(obj)jz4740.c
+ ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
+
+$(obj)jz_serial.c:
+ @rm -f $(obj)jz_serial.c
+ ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
+
+# from nand_spl directory
+$(obj)nand_boot_jz4740.c:
+ @rm -f $(obj)nand_boot_jz4740.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Ingenic JZ4740 Reference Platform
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
+# in the first 4kBytes of memory space in cache. So we set
+# TEXT_BASE to starting address in internal cache here.
+#
+TEXT_BASE = 0x80000000
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o usb_boot.o
+COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
+ dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
+ cat $< $(nandobj)junk1 > $(nandobj)junk2
+ dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
+ cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
+ dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
+ cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
+ dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
+ rm -f $(nandobj)junk*
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
+
+$(obj)usb_boot.S:
+ @rm -f $(obj)usb_boot.S
+ ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
+
+$(obj)cpu.c:
+ @rm -f $(obj)cpu.c
+ ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
+
+$(obj)jz4740.c:
+ @rm -f $(obj)jz4740.c
+ ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
+
+$(obj)jz_serial.c:
+ @rm -f $(obj)jz_serial.c
+ ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
+
+# from nand_spl directory
+$(obj)nand_boot_jz4740.c:
+ @rm -f $(obj)nand_boot_jz4740.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Ingenic JZ4740 Reference Platform
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
+# in the first 4kBytes of memory space in cache. So we set
+# TEXT_BASE to starting address in internal cache here.
+#
+TEXT_BASE = 0x80000000
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+
+include $(TOPDIR)/config.mk
+include $(TOPDIR)/nand_spl/board/$(BOARDDIR)/config.mk
+
+LDSCRIPT= $(TOPDIR)/nand_spl/board/$(BOARDDIR)/u-boot.lds
+LDFLAGS = -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE)
+AFLAGS += -DCONFIG_NAND_SPL
+CFLAGS += -DCONFIG_NAND_SPL
+
+SOBJS = start.o usb_boot.o
+COBJS = nand_boot_jz4740.o cpu.o jz4740.o jz_serial.o
+
+SRCS := $(addprefix $(obj),$(SOBJS:.o=.S) $(COBJS:.o=.c))
+OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
+__OBJS := $(SOBJS) $(COBJS)
+LNDIR := $(OBJTREE)/nand_spl/board/$(BOARDDIR)
+
+nandobj := $(OBJTREE)/nand_spl/
+
+ALL = $(nandobj)u-boot-spl $(nandobj)u-boot-spl.bin $(nandobj)u-boot-spl-16k.bin
+all: $(obj).depend $(ALL)
+
+$(nandobj)u-boot-spl-16k.bin: $(nandobj)u-boot-spl.bin
+ dd bs=1024 count=8 if=/dev/zero of=$(nandobj)junk1
+ cat $< $(nandobj)junk1 > $(nandobj)junk2
+ dd bs=1024 count=8 if=$(nandobj)junk2 of=$(nandobj)junk3
+ cat $(nandobj)junk3 $(nandobj)junk3 > $(nandobj)junk4
+ dd bs=1024 count=256 if=/dev/zero of=$(nandobj)junk5
+ cat $(nandobj)junk4 $(nandobj)junk5 > $(nandobj)junk6
+ dd bs=1024 count=256 if=$(nandobj)junk6 of=$@
+ rm -f $(nandobj)junk*
+
+$(nandobj)u-boot-spl.bin: $(nandobj)u-boot-spl
+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
+
+$(nandobj)u-boot-spl: $(OBJS)
+ cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
+ -Map $(nandobj)u-boot-spl.map \
+ -o $(nandobj)u-boot-spl
+
+# create symbolic links for common files
+
+# from cpu directory
+$(obj)start.S:
+ @rm -f $(obj)start.S
+ ln -s $(SRCTREE)/cpu/mips/start.S $(obj)start.S
+
+$(obj)usb_boot.S:
+ @rm -f $(obj)usb_boot.S
+ ln -s $(SRCTREE)/cpu/mips/usb_boot.S $(obj)usb_boot.S
+
+$(obj)cpu.c:
+ @rm -f $(obj)cpu.c
+ ln -s $(SRCTREE)/cpu/mips/cpu.c $(obj)cpu.c
+
+$(obj)jz4740.c:
+ @rm -f $(obj)jz4740.c
+ ln -s $(SRCTREE)/cpu/mips/jz4740.c $(obj)jz4740.c
+
+$(obj)jz_serial.c:
+ @rm -f $(obj)jz_serial.c
+ ln -s $(SRCTREE)/cpu/mips/jz_serial.c $(obj)jz_serial.c
+
+# from nand_spl directory
+$(obj)nand_boot_jz4740.c:
+ @rm -f $(obj)nand_boot_jz4740.c
+ ln -s $(SRCTREE)/nand_spl/nand_boot_jz4740.c $(obj)nand_boot_jz4740.c
+
+#########################################################################
+
+$(obj)%.o: $(obj)%.S
+ $(CC) $(AFLAGS) -c -o $@ $<
+
+$(obj)%.o: $(obj)%.c
+ $(CC) $(CFLAGS) -c -o $@ $<
+
+# defines $(obj).depend target
+include $(SRCTREE)/rules.mk
+
+sinclude $(obj).depend
+
+#########################################################################
--- /dev/null
+#
+# (C) Copyright 2006
+# Stefan Roese, DENX Software Engineering, sr@denx.de.
+#
+# See file CREDITS for list of people who contributed to this
+# project.
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License as
+# published by the Free Software Foundation; either version 2 of
+# the License, or (at your option) any later version.
+#
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY; without even the implied warranty of
+# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+# GNU General Public License for more details.
+#
+# You should have received a copy of the GNU General Public License
+# along with this program; if not, write to the Free Software
+# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+# MA 02111-1307 USA
+#
+#
+# Ingenic JZ4740 Reference Platform
+#
+
+#
+# TEXT_BASE for SPL:
+#
+# On JZ4730 platforms the SPL is located at 0x80000000...0x80001000,
+# in the first 4kBytes of memory space in cache. So we set
+# TEXT_BASE to starting address in internal cache here.
+#
+TEXT_BASE = 0x80000000
--- /dev/null
+/*
+ * (C) Copyright 2005
+ * Ingenic Semiconductor, <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+OUTPUT_FORMAT("elf32-tradlittlemips", "elf32-tradlittlemips", "elf32-tradlittlemips")
+
+OUTPUT_ARCH(mips)
+ENTRY(_start)
+SECTIONS
+{
+ . = 0x00000000;
+
+ . = ALIGN(4);
+ .text :
+ {
+ *(.text)
+ }
+
+ . = ALIGN(4);
+ .rodata : { *(.rodata) }
+
+ . = ALIGN(4);
+ .data : { *(.data) }
+
+ . = ALIGN(4);
+ .sdata : { *(.sdata) }
+
+ _gp = ALIGN(16);
+
+ __got_start = .;
+ .got : { *(.got) }
+ __got_end = .;
+
+ .sdata : { *(.sdata) }
+
+ __u_boot_cmd_start = .;
+ .u_boot_cmd : { *(.u_boot_cmd) }
+ __u_boot_cmd_end = .;
+
+ uboot_end_data = .;
+ num_got_entries = (__got_end - __got_start) >> 2;
+
+ . = ALIGN(4);
+ .sbss : { *(.sbss) }
+ .bss : { *(.bss) }
+ uboot_end = .;
+}
--- /dev/null
+/*
+ * Copyright (C) 2007 Ingenic Semiconductor Inc.
+ * Author: Peter <jlwei@ingenic.cn>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <common.h>
+#include <nand.h>
+
+#include <asm/io.h>
+#include <asm/jz4740.h>
+
+#define KEY_U_OUT (32 * 2 + 16)
+#define KEY_U_IN (32 * 3 + 19)
+
+/*
+ * NAND flash definitions
+ */
+
+#define NAND_DATAPORT 0xb8000000
+#define NAND_ADDRPORT 0xb8010000
+#define NAND_COMMPORT 0xb8008000
+
+#define ECC_BLOCK 512
+#define ECC_POS 6
+#define PAR_SIZE 9
+
+#define __nand_enable() (REG_EMC_NFCSR |= EMC_NFCSR_NFE1 | EMC_NFCSR_NFCE1)
+#define __nand_disable() (REG_EMC_NFCSR &= ~(EMC_NFCSR_NFCE1))
+#define __nand_ecc_rs_encoding() \
+ (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_ENCODING)
+#define __nand_ecc_rs_decoding() \
+ (REG_EMC_NFECR = EMC_NFECR_ECCE | EMC_NFECR_ERST | EMC_NFECR_RS | EMC_NFECR_RS_DECODING)
+#define __nand_ecc_disable() (REG_EMC_NFECR &= ~EMC_NFECR_ECCE)
+#define __nand_ecc_encode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_ENCF))
+#define __nand_ecc_decode_sync() while (!(REG_EMC_NFINTS & EMC_NFINTS_DECF))
+
+static inline void __nand_dev_ready(void)
+{
+ unsigned int timeout = 10000;
+ while ((REG_GPIO_PXPIN(2) & 0x40000000) && timeout--);
+ while (!(REG_GPIO_PXPIN(2) & 0x40000000));
+}
+
+#define __nand_cmd(n) (REG8(NAND_COMMPORT) = (n))
+#define __nand_addr(n) (REG8(NAND_ADDRPORT) = (n))
+#define __nand_data8() REG8(NAND_DATAPORT)
+#define __nand_data16() REG16(NAND_DATAPORT)
+
+#if (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R3)
+ #define NAND_BUS_WIDTH 8
+ #define NAND_ROW_CYCLE 3
+#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B8R2)
+ #define NAND_BUS_WIDTH 8
+ #define NAND_ROW_CYCLE 2
+#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R3)
+ #define NAND_BUS_WIDTH 16
+ #define NAND_ROW_CYCLE 3
+#elif (JZ4740_NANDBOOT_CFG == JZ4740_NANDBOOT_B16R2)
+ #define NAND_BUS_WIDTH 16
+ #define NAND_ROW_CYCLE 2
+#endif
+
+/*
+ * NAND flash parameters
+ */
+static int page_size = 2048;
+static int oob_size = 64;
+static int ecc_count = 4;
+static int page_per_block = 64;
+static int bad_block_pos = 0;
+static int block_size = 131072;
+
+static unsigned char oob_buf[128] = {0};
+
+/*
+ * External routines
+ */
+extern void flush_cache_all(void);
+extern int serial_init(void);
+extern void serial_puts(const char *s);
+extern void sdram_init(void);
+extern void pll_init(void);
+extern void usb_boot();
+
+/*
+ * NAND flash routines
+ */
+#if NAND_BUS_WIDTH == 16
+static inline void nand_read_buf16(void *buf, int count)
+{
+ int i;
+ u16 *p = (u16 *)buf;
+
+ for (i = 0; i < count; i += 2)
+ *p++ = __nand_data16();
+}
+#define nand_read_buf nand_read_buf16
+
+#elif NAND_BUS_WIDTH == 8
+static inline void nand_read_buf8(void *buf, int count)
+{
+ int i;
+ u8 *p = (u8 *)buf;
+
+ for (i = 0; i < count; i++)
+ *p++ = __nand_data8();
+}
+#define nand_read_buf nand_read_buf8
+
+#endif
+
+/* Correct 1~9-bit errors in 512-bytes data */
+static void rs_correct(unsigned char *dat, int idx, int mask)
+{
+ int i;
+
+ idx--;
+
+ i = idx + (idx >> 3);
+ if (i >= 512)
+ return;
+
+ mask <<= (idx & 0x7);
+
+ dat[i] ^= mask & 0xff;
+ if (i < 511)
+ dat[i+1] ^= (mask >> 8) & 0xff;
+}
+
+static int nand_read_oob(int page_addr, uchar *buf, int size)
+{
+ int col_addr;
+ if (page_size != 512)
+ col_addr = page_size;
+ else {
+ col_addr = 0;
+ __nand_dev_ready();
+ }
+
+ if (page_size != 512)
+ /* Send READ0 command */
+ __nand_cmd(NAND_CMD_READ0);
+ else
+ /* Send READOOB command */
+ __nand_cmd(NAND_CMD_READOOB);
+
+ /* Send column address */
+ __nand_addr(col_addr & 0xff);
+ if (page_size != 512)
+ __nand_addr((col_addr >> 8) & 0xff);
+
+ /* Send page address */
+ __nand_addr(page_addr & 0xff);
+ __nand_addr((page_addr >> 8) & 0xff);
+ #ifdef NAND_ROW_CYCLE == 3
+ __nand_addr((page_addr >> 16) & 0xff);
+ #endif
+
+ /* Send READSTART command for 2048 or 4096 ps NAND */
+ if (page_size != 512)
+ __nand_cmd(NAND_CMD_READSTART);
+
+ /* Wait for device ready */
+ __nand_dev_ready();
+
+ /* Read oob data */
+ nand_read_buf(buf, size);
+ if (page_size == 512)
+ __nand_dev_ready();
+ return 0;
+}
+
+static int nand_read_page(int page_addr, uchar *dst, uchar *oobbuf)
+{
+ uchar *databuf = dst, *tmpbuf;
+ int i, j;
+
+ /*
+ * Read oob data
+ */
+ nand_read_oob(page_addr, oobbuf, oob_size);
+
+ /*
+ * Read page data
+ */
+
+ /* Send READ0 command */
+ __nand_cmd(NAND_CMD_READ0);
+
+ /* Send column address */
+ __nand_addr(0);
+ if (page_size != 512)
+ __nand_addr(0);
+
+ /* Send page address */
+ __nand_addr(page_addr & 0xff);
+ __nand_addr((page_addr >> 8) & 0xff);
+ #if NAND_ROW_CYCLE == 3
+ __nand_addr((page_addr >> 16) & 0xff);
+ #endif
+
+ /* Send READSTART command for 2048 or 4096 ps NAND */
+ if (page_size != 512)
+ __nand_cmd(NAND_CMD_READSTART);
+
+ /* Wait for device ready */
+ __nand_dev_ready();
+
+ /* Read page data */
+ tmpbuf = databuf;
+
+ for (i = 0; i < ecc_count; i++) {
+ volatile unsigned char *paraddr = (volatile unsigned char *)EMC_NFPAR0;
+ unsigned int stat;
+
+ /* Enable RS decoding */
+ REG_EMC_NFINTS = 0x0;
+ __nand_ecc_rs_decoding();
+
+ /* Read data */
+ nand_read_buf((void *)tmpbuf, ECC_BLOCK);
+
+ /* Set PAR values */
+ for (j = 0; j < PAR_SIZE; j++) {
+#if defined(CONFIG_SYS_NAND_ECC_POS)
+ *paraddr++ = oobbuf[CONFIG_SYS_NAND_ECC_POS + i*PAR_SIZE + j];
+#else
+ *paraddr++ = oobbuf[ECC_POS + i*PAR_SIZE + j];
+#endif
+ }
+
+ /* Set PRDY */
+ REG_EMC_NFECR |= EMC_NFECR_PRDY;
+
+ /* Wait for completion */
+ __nand_ecc_decode_sync();
+
+ /* Disable decoding */
+ __nand_ecc_disable();
+
+ /* Check result of decoding */
+ stat = REG_EMC_NFINTS;
+ if (stat & EMC_NFINTS_ERR) {
+ /* Error occurred */
+ /* serial_puts("\n Error occurred\n"); */
+ if (stat & EMC_NFINTS_UNCOR) {
+ /* Uncorrectable error occurred */
+ /* serial_puts("\nUncorrectable error occurred\n"); */
+ }
+ else {
+ unsigned int errcnt, index, mask;
+
+ errcnt = (stat & EMC_NFINTS_ERRCNT_MASK) >> EMC_NFINTS_ERRCNT_BIT;
+ switch (errcnt) {
+ case 4:
+ index = (REG_EMC_NFERR3 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
+ mask = (REG_EMC_NFERR3 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
+ rs_correct(tmpbuf, index, mask);
+ /* FALL-THROUGH */
+ case 3:
+ index = (REG_EMC_NFERR2 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
+ mask = (REG_EMC_NFERR2 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
+ rs_correct(tmpbuf, index, mask);
+ /* FALL-THROUGH */
+ case 2:
+ index = (REG_EMC_NFERR1 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
+ mask = (REG_EMC_NFERR1 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
+ rs_correct(tmpbuf, index, mask);
+ /* FALL-THROUGH */
+ case 1:
+ index = (REG_EMC_NFERR0 & EMC_NFERR_INDEX_MASK) >> EMC_NFERR_INDEX_BIT;
+ mask = (REG_EMC_NFERR0 & EMC_NFERR_MASK_MASK) >> EMC_NFERR_MASK_BIT;
+ rs_correct(tmpbuf, index, mask);
+ break;
+ default:
+ break;
+ }
+ }
+ }
+
+ tmpbuf += ECC_BLOCK;
+ }
+
+ return 0;
+}
+
+#ifndef CONFIG_SYS_NAND_BADBLOCK_PAGE
+#define CONFIG_SYS_NAND_BADBLOCK_PAGE 0 /* NAND bad block was marked at this page in a block, starting from 0 */
+#endif
+
+static void nand_load(int offs, int uboot_size, uchar *dst)
+{
+ int page;
+ int pagecopy_count;
+
+ __nand_enable();
+
+ page = offs / page_size;
+ pagecopy_count = 0;
+ while (pagecopy_count < (uboot_size / page_size)) {
+ if (page % page_per_block == 0) {
+ nand_read_oob(page + CONFIG_SYS_NAND_BADBLOCK_PAGE, oob_buf, oob_size);
+ if (oob_buf[bad_block_pos] != 0xff) {
+ page += page_per_block;
+ /* Skip bad block */
+ continue;
+ }
+ }
+ /* Load this page to dst, do the ECC */
+ nand_read_page(page, dst, oob_buf);
+
+ dst += page_size;
+ page++;
+ pagecopy_count++;
+ }
+
+ __nand_disable();
+}
+
+static void jz_nand_init(void) {
+
+ /* Optimize the timing of nand */
+ REG_EMC_SMCR1 = 0x094c4400;
+}
+
+static void gpio_init(void)
+{
+ /*
+ * Initialize SDRAM pins
+ */
+#if defined(CONFIG_JZ4720)
+ __gpio_as_sdram_16bit_4720();
+#elif defined(CONFIG_JZ4725)
+ __gpio_as_sdram_16bit_4725();
+#else
+ __gpio_as_sdram_32bit();
+#endif
+
+ /*
+ * Initialize UART0 pins
+ */
+ __gpio_as_uart0();
+}
+
+static int is_usb_boot()
+{
+ int keyU = 0;
+
+ __gpio_as_input(KEY_U_IN);
+ __gpio_enable_pull(KEY_U_IN);
+
+ __gpio_as_output(KEY_U_OUT);
+ __gpio_clear_pin(KEY_U_OUT);
+
+ keyU = __gpio_get_pin(KEY_U_IN);
+
+ if (keyU)
+ serial_puts("[U] not pressed\n");
+ else
+ serial_puts("[U] pressed\n");
+
+ return !keyU;
+}
+
+void nand_boot(void)
+{
+ void (*uboot)(void);
+
+ /*
+ * Init hardware
+ */
+ jz_nand_init();
+ gpio_init();
+ serial_init();
+
+ serial_puts("\n\nNAND Secondary Program Loader\n\n");
+
+ pll_init();
+ sdram_init();
+
+#if defined(CONFIG_NANONOTE)
+ if(is_usb_boot()) {
+ serial_puts("enter USB BOOT mode\n");
+ usb_boot();
+ }
+#endif
+
+ page_size = CONFIG_SYS_NAND_PAGE_SIZE;
+ block_size = CONFIG_SYS_NAND_BLOCK_SIZE;
+ page_per_block = CONFIG_SYS_NAND_BLOCK_SIZE / CONFIG_SYS_NAND_PAGE_SIZE;
+ bad_block_pos = (page_size == 512) ? 5 : 0;
+ oob_size = page_size / 32;
+ ecc_count = page_size / ECC_BLOCK;
+
+ /*
+ * Load U-Boot image from NAND into RAM
+ */
+ nand_load(CONFIG_SYS_NAND_U_BOOT_OFFS, CONFIG_SYS_NAND_U_BOOT_SIZE,
+ (uchar *)CONFIG_SYS_NAND_U_BOOT_DST);
+
+ uboot = (void (*)(void))CONFIG_SYS_NAND_U_BOOT_START;
+
+ serial_puts("Starting U-Boot ...\n");
+
+ /*
+ * Flush caches
+ */
+ flush_cache_all();
+
+ /*
+ * Jump to U-Boot image
+ */
+ (*uboot)();
+}
--- /dev/null
+this patch include the u-boot2009.11 change files
+
+From: Xiangfu Liu <xiangfu@sharism.cc>
+
+
+---
+
+ Makefile | 10 +
+ common/env_common.c | 2
+ common/lcd.c | 45 ++++
+ common/main.c | 4
+ cpu/mips/Makefile | 4
+ cpu/mips/cache.S | 280 ++++++++++----------------
+ cpu/mips/config.mk | 6 -
+ cpu/mips/cpu.c | 75 +++++++
+ cpu/mips/start.S | 432 ++++++++++++++++++++++++++++++++--------
+ drivers/mtd/nand/nand_base.c | 88 ++++++++
+ examples/standalone/mips.lds | 2
+ include/asm-mips/addrspace.h | 2
+ include/asm-mips/global_data.h | 11 +
+ include/lcd.h | 56 +++++
+ lib_mips/board.c | 18 +-
+ lib_mips/bootm.c | 7 +
+ lib_mips/time.c | 4
+ 20 files changed, 800 insertions(+), 333 deletions(-)
+
+
+diff --git a/Makefile b/Makefile
+index f06a97c..a318eb4 100644
+--- a/Makefile
++++ b/Makefile
+@@ -3439,6 +3439,22 @@ qemu_mips_config : unconfig
+ @$(MKCONFIG) -a qemu-mips mips mips qemu-mips
+
+ #########################################################################
++## MIPS32 Jz47XX
++#########################################################################
++qi_lb60_config : unconfig
++ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
++ @echo "Compile NAND boot image for QI LB60"
++ @$(MKCONFIG) -a qi_lb60 mips mips nanonote
++ @echo "TEXT_BASE = 0x80100000" > $(obj)board/nanonote/config.tmp
++ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
++
++avt2_config : unconfig
++ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
++ @echo "Compile NAND boot image for AVT2"
++ @$(MKCONFIG) -a avt2 mips mips nanonote
++ @echo "TEXT_BASE = 0x80100000" > $(obj)board/nanonote/config.tmp
++ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
++#########################################################################
+ ## MIPS64 5Kc
+ #########################################################################
+
+diff --git a/common/env_common.c b/common/env_common.c
+index 439a4a9..6cfe30b 100644
+--- a/common/env_common.c
++++ b/common/env_common.c
+@@ -134,7 +134,10 @@ uchar default_environment[] = {
+ "pcidelay=" MK_STR(CONFIG_PCI_BOOTDELAY) "\0"
+ #endif
+-#ifdef CONFIG_EXTRA_ENV_SETTINGS
+- CONFIG_EXTRA_ENV_SETTINGS
++#ifdef CONFIG_BOOTARGSFROMSD
++ "bootargsfromsd=" CONFIG_BOOTARGSFROMSD "\0"
++#endif
++#ifdef CONFIG_BOOTCOMMANDFROMSD
++ "bootcmdfromsd=" CONFIG_BOOTCOMMANDFROMSD "\0"
+ #endif
+ "\0"
+ };
+diff --git a/common/lcd.c b/common/lcd.c
+index 4e31618..ddd5aa8 100644
+--- a/common/lcd.c
++++ b/common/lcd.c
+@@ -64,7 +64,9 @@
+ #ifdef CONFIG_LCD_LOGO
+ # include <bmp_logo.h> /* Get logo data, width and height */
+ # if (CONSOLE_COLOR_WHITE >= BMP_LOGO_OFFSET)
+-# error Default Color Map overlaps with Logo Color Map
++# ifndef CONFIG_JzRISC /* JzRISC core */
++# error Default Color Map overlaps with Logo Color Map
++# endif
+ # endif
+ #endif
+
+@@ -249,6 +251,14 @@ static void lcd_drawchars (ushort x, ushort y, uchar *str, int count)
+ lcd_color_fg : lcd_color_bg;
+ bits <<= 1;
+ }
++#elif LCD_BPP == LCD_COLOR32
++ uint *m = (uint *)d;
++ for (c=0; c<32; ++c) {
++ *m++ = (bits & 0x80) ?
++ lcd_color_fg : lcd_color_bg;
++ //d+=4;
++ bits <<= 1;
++ }
+ #endif
+ }
+ #if LCD_BPP == LCD_MONOCHROME
+@@ -315,6 +325,9 @@ static void test_pattern (void)
+ }
+ #endif /* LCD_TEST_PATTERN */
+
++#ifdef CONFIG_JzRISC /* JzRISC core */
++extern int flush_cache_all(void);
++#endif
+
+ /************************************************************************/
+ /* ** GENERIC Initialization Routines */
+@@ -381,6 +394,7 @@ static int lcd_clear (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+ COLOR_MASK(lcd_getbgcolor()),
+ lcd_line_length*panel_info.vl_row);
+ #endif
++
+ /* Paint the logo and retrieve LCD base address */
+ debug ("[LCD] Drawing the logo...\n");
+ lcd_console_address = lcd_logo ();
+@@ -458,6 +472,8 @@ static void lcd_setfgcolor (int color)
+ {
+ #ifdef CONFIG_ATMEL_LCD
+ lcd_color_fg = color;
++#elif LCD_BPP == LCD_COLOR32
++ lcd_color_fg = color & 0xFFFFFFFF;
+ #else
+ lcd_color_fg = color & 0x0F;
+ #endif
+@@ -469,6 +485,8 @@ static void lcd_setbgcolor (int color)
+ {
+ #ifdef CONFIG_ATMEL_LCD
+ lcd_color_bg = color;
++#elif LCD_BPP == LCD_COLOR32
++ lcd_color_bg = color & 0xFFFFFFFF;
+ #else
+ lcd_color_bg = color & 0x0F;
+ #endif
+@@ -507,6 +525,7 @@ void bitmap_plot (int x, int y)
+ uchar *bmap;
+ uchar *fb;
+ ushort *fb16;
++ uint *fb32;
+ #if defined(CONFIG_PXA250)
+ struct pxafb_info *fbi = &panel_info.pxa;
+ #elif defined(CONFIG_MPC823)
+@@ -567,13 +586,25 @@ void bitmap_plot (int x, int y)
+ }
+ }
+ else { /* true color mode */
+- fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
+- for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
+- for (j=0; j<BMP_LOGO_WIDTH; j++) {
+- fb16[j] = bmp_logo_palette[(bmap[j])];
++ if(NBITS(panel_info.vl_bpix) == 16){
++ fb16 = (ushort *)(lcd_base + y * lcd_line_length + x);
++ for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
++ for (j=0; j<BMP_LOGO_WIDTH; j++) {
++ fb16[j] = bmp_logo_palette[(bmap[j])];
+ }
+- bmap += BMP_LOGO_WIDTH;
+- fb16 += panel_info.vl_col;
++ bmap += BMP_LOGO_WIDTH;
++ fb16 += panel_info.vl_col;
++ }
++ }
++ else{
++ fb32 = (uint *)(lcd_base + y * lcd_line_length + x);
++ for (i=0; i<BMP_LOGO_HEIGHT; ++i) {
++ for (j=0; j<BMP_LOGO_WIDTH; j++) {
++ fb32[j] = bmp_logo_palette[(bmap[j])];
++ }
++ bmap += BMP_LOGO_WIDTH;
++ fb32 += panel_info.vl_col;
++ }
+ }
+ }
+
+diff --git a/common/main.c b/common/main.c
+index 10d8904..ff11ad7 100644
+--- a/common/main.c
++++ b/common/main.c
+@@ -372,7 +372,9 @@ void main_loop (void)
+ #if defined(CONFIG_BOOTDELAY) && (CONFIG_BOOTDELAY >= 0)
+ s = getenv ("bootdelay");
+ bootdelay = s ? (int)simple_strtol(s, NULL, 10) : CONFIG_BOOTDELAY;
+-
++ DECLARE_GLOBAL_DATA_PTR;
++ if (gd->boot_option == 5)
++ bootdelay = gd->boot_option;
+ debug ("### main_loop entered: bootdelay=%d\n\n", bootdelay);
+
+ # ifdef CONFIG_BOOT_RETRY_TIME
+@@ -393,7 +395,9 @@ void main_loop (void)
+ }
+ else
+ #endif /* CONFIG_BOOTCOUNT_LIMIT */
+- s = getenv ("bootcmd");
++ s = gd->boot_option == 1 ?
++ getenv ("bootcmdfromsd"):
++ getenv ("bootcmd") ;
+
+ debug ("### main_loop: bootcmd=\"%s\"\n", s ? s : "<UNDEFINED>");
+
+diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
+index 28a1cbb..5207bc5 100644
+--- a/cpu/mips/Makefile
++++ b/cpu/mips/Makefile
+@@ -33,6 +33,9 @@ SOBJS-$(CONFIG_INCA_IP) += incaip_wdt.o
+ COBJS-$(CONFIG_INCA_IP) += asc_serial.o incaip_clock.o
+ COBJS-$(CONFIG_PURPLE) += asc_serial.o
+ COBJS-$(CONFIG_SOC_AU1X00) += au1x00_eth.o au1x00_serial.o au1x00_usb_ohci.o
++COBJS-$(CONFIG_JZSOC) += jz4740.o jz_serial.o jz_mmc.o jz4740_nand.o
++COBJS-$(CONFIG_NANONOTE) += nanonote_gpm940b0.o
++
+
+ SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+ OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+diff --git a/cpu/mips/cache.S b/cpu/mips/cache.S
+index ff4f11c..cb3baff 100644
+--- a/cpu/mips/cache.S
++++ b/cpu/mips/cache.S
+@@ -23,32 +23,19 @@
+ */
+
+ #include <config.h>
+-#include <asm/asm.h>
++#include <version.h>
+ #include <asm/regdef.h>
+ #include <asm/mipsregs.h>
+ #include <asm/addrspace.h>
+ #include <asm/cacheops.h>
+
+-#define RA t8
++#ifndef CONFIG_JzRISC
+
+-/*
+- * 16kB is the maximum size of instruction and data caches on MIPS 4K,
+- * 64kB is on 4KE, 24K, 5K, etc. Set bigger size for convenience.
+- *
+- * Note that the above size is the maximum size of primary cache. U-Boot
+- * doesn't have L2 cache support for now.
+- */
+-#define MIPS_MAX_CACHE_SIZE 0x10000
+-
+-#define INDEX_BASE CKSEG0
++ /* 16KB is the maximum size of instruction and data caches on
++ * MIPS 4K.
++ */
++#define MIPS_MAX_CACHE_SIZE 0x4000
+
+- .macro cache_op op addr
+- .set push
+- .set noreorder
+- .set mips3
+- cache \op, 0(\addr)
+- .set pop
+- .endm
+
+ /*
+ * cacheop macro to automate cache operations
+@@ -119,79 +106,7 @@
+ #define icacheop(kva, n, cacheSize, cacheLineSize, op) \
+ icacheopn(kva, n, cacheSize, cacheLineSize, 1, (op))
+
+- .macro f_fill64 dst, offset, val
+- LONG_S \val, (\offset + 0 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 1 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 2 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 3 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 4 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 5 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 6 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 7 * LONGSIZE)(\dst)
+-#if LONGSIZE == 4
+- LONG_S \val, (\offset + 8 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 9 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 10 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 11 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 12 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 13 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 14 * LONGSIZE)(\dst)
+- LONG_S \val, (\offset + 15 * LONGSIZE)(\dst)
+-#endif
+- .endm
+-
+-/*
+- * mips_init_icache(uint PRId, ulong icache_size, unchar icache_linesz)
+- */
+-LEAF(mips_init_icache)
+- blez a1, 9f
+- mtc0 zero, CP0_TAGLO
+- /* clear tag to invalidate */
+- PTR_LI t0, INDEX_BASE
+- PTR_ADDU t1, t0, a1
+-1: cache_op Index_Store_Tag_I t0
+- PTR_ADDU t0, a2
+- bne t0, t1, 1b
+- /* fill once, so data field parity is correct */
+- PTR_LI t0, INDEX_BASE
+-2: cache_op Fill t0
+- PTR_ADDU t0, a2
+- bne t0, t1, 2b
+- /* invalidate again - prudent but not strictly neccessary */
+- PTR_LI t0, INDEX_BASE
+-1: cache_op Index_Store_Tag_I t0
+- PTR_ADDU t0, a2
+- bne t0, t1, 1b
+-9: jr ra
+- END(mips_init_icache)
+-
+ /*
+- * mips_init_dcache(uint PRId, ulong dcache_size, unchar dcache_linesz)
+- */
+-LEAF(mips_init_dcache)
+- blez a1, 9f
+- mtc0 zero, CP0_TAGLO
+- /* clear all tags */
+- PTR_LI t0, INDEX_BASE
+- PTR_ADDU t1, t0, a1
+-1: cache_op Index_Store_Tag_D t0
+- PTR_ADDU t0, a2
+- bne t0, t1, 1b
+- /* load from each line (in cached space) */
+- PTR_LI t0, INDEX_BASE
+-2: LONG_L zero, 0(t0)
+- PTR_ADDU t0, a2
+- bne t0, t1, 2b
+- /* clear all tags */
+- PTR_LI t0, INDEX_BASE
+-1: cache_op Index_Store_Tag_D t0
+- PTR_ADDU t0, a2
+- bne t0, t1, 1b
+-9: jr ra
+- END(mips_init_dcache)
+-
+-/*******************************************************************************
+-*
+ * mips_cache_reset - low level initialisation of the primary caches
+ *
+ * This routine initialises the primary caches to ensure that they
+@@ -204,112 +119,129 @@ LEAF(mips_init_dcache)
+ * a source of parity.
+ *
+ * RETURNS: N/A
+-*
+ */
+-NESTED(mips_cache_reset, 0, ra)
+- move RA, ra
++ .globl mips_cache_reset
++ .ent mips_cache_reset
++mips_cache_reset:
++
+ li t2, CONFIG_SYS_ICACHE_SIZE
+ li t3, CONFIG_SYS_DCACHE_SIZE
+ li t4, CONFIG_SYS_CACHELINE_SIZE
+ move t5, t4
+
++
+ li v0, MIPS_MAX_CACHE_SIZE
+
+- /*
+- * Now clear that much memory starting from zero.
++ /* Now clear that much memory starting from zero.
+ */
+- PTR_LI a0, CKSEG1
+- PTR_ADDU a1, a0, v0
+-2: PTR_ADDIU a0, 64
+- f_fill64 a0, -64, zero
+- bne a0, a1, 2b
+-
+- /*
+- * The caches are probably in an indeterminate state,
+- * so we force good parity into them by doing an
+- * invalidate, load/fill, invalidate for each line.
++
++ li a0, KSEG1
++ addu a1, a0, v0
++
++2: sw zero, 0(a0)
++ sw zero, 4(a0)
++ sw zero, 8(a0)
++ sw zero, 12(a0)
++ sw zero, 16(a0)
++ sw zero, 20(a0)
++ sw zero, 24(a0)
++ sw zero, 28(a0)
++ addu a0, 32
++ bltu a0, a1, 2b
++
++ /* Set invalid tag.
+ */
+
+- /*
+- * Assume bottom of RAM will generate good parity for the cache.
++ mtc0 zero, CP0_TAGLO
++
++ /*
++ * The caches are probably in an indeterminate state,
++ * so we force good parity into them by doing an
++ * invalidate, load/fill, invalidate for each line.
++ */
++
++ /* Assume bottom of RAM will generate good parity for the cache.
+ */
+
+- /*
+- * Initialize the I-cache first,
++ li a0, K0BASE
++ move a2, t2 # icacheSize
++ move a3, t4 # icacheLineSize
++ move a1, a2
++ icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
++
++ /* To support Orion/R4600, we initialise the data cache in 3 passes.
+ */
+- move a1, t2
+- move a2, t4
+- PTR_LA t7, mips_init_icache
+- jalr t7
+
+- /*
+- * then initialize D-cache.
++ /* 1: initialise dcache tags.
+ */
+- move a1, t3
+- move a2, t5
+- PTR_LA t7, mips_init_dcache
+- jalr t7
+
+- jr RA
+- END(mips_cache_reset)
++ li a0, K0BASE
++ move a2, t3 # dcacheSize
++ move a3, t5 # dcacheLineSize
++ move a1, a2
++ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
+
+-/*******************************************************************************
+-*
+-* dcache_status - get cache status
+-*
+-* RETURNS: 0 - cache disabled; 1 - cache enabled
+-*
+-*/
+-LEAF(dcache_status)
+- mfc0 t0, CP0_CONFIG
+- li t1, CONF_CM_UNCACHED
+- andi t0, t0, CONF_CM_CMASK
+- move v0, zero
+- beq t0, t1, 2f
+- li v0, 1
+-2: jr ra
+- END(dcache_status)
+-
+-/*******************************************************************************
+-*
++ /* 2: fill dcache.
++ */
++
++ li a0, K0BASE
++ move a2, t3 # dcacheSize
++ move a3, t5 # dcacheLineSize
++ move a1, a2
++ icacheopn(a0,a1,a2,a3,1lw,(dummy))
++
++ /* 3: clear dcache tags.
++ */
++
++ li a0, K0BASE
++ move a2, t3 # dcacheSize
++ move a3, t5 # dcacheLineSize
++ move a1, a2
++ icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
++
++ j ra
++ .end mips_cache_reset
++
++
++/*
++ * dcache_status - get cache status
++ *
++ * RETURNS: 0 - cache disabled; 1 - cache enabled
++ */
++ .globl dcache_status
++ .ent dcache_status
++dcache_status:
++
++ mfc0 v0, CP0_CONFIG
++ andi v0, v0, 1
++ j ra
++
++ .end dcache_status
++
++/*
+ * dcache_disable - disable cache
+ *
+ * RETURNS: N/A
+-*
+ */
+-LEAF(dcache_disable)
++ .globl dcache_disable
++ .ent dcache_disable
++dcache_disable:
++
+ mfc0 t0, CP0_CONFIG
+ li t1, -8
+ and t0, t0, t1
+ ori t0, t0, CONF_CM_UNCACHED
+- mtc0 t0, CP0_CONFIG
+- jr ra
+- END(dcache_disable)
++ mtc0 t0, CP0_CONFIG
++ j ra
+
+-/*******************************************************************************
+-*
+-* dcache_enable - enable cache
+-*
+-* RETURNS: N/A
+-*
+-*/
+-LEAF(dcache_enable)
+- mfc0 t0, CP0_CONFIG
+- ori t0, CONF_CM_CMASK
+- xori t0, CONF_CM_CMASK
+- ori t0, CONF_CM_CACHABLE_NONCOHERENT
+- mtc0 t0, CP0_CONFIG
+- jr ra
+- END(dcache_enable)
+-
+-#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
+-/*******************************************************************************
+-*
+-* mips_cache_lock - lock RAM area pointed to by a0 in cache.
+-*
+-* RETURNS: N/A
+-*
+-*/
++ .end dcache_disable
++
++
++/*
++ * mips_cache_lock - lock RAM area pointed to by a0 in cache.
++ *
++ * RETURNS: N/A
++ */
+ #if defined(CONFIG_PURPLE)
+ # define CACHE_LOCK_SIZE (CONFIG_SYS_DCACHE_SIZE/2)
+ #else
+@@ -318,14 +250,14 @@ LEAF(dcache_enable)
+ .globl mips_cache_lock
+ .ent mips_cache_lock
+ mips_cache_lock:
+- li a1, CKSEG0 - CACHE_LOCK_SIZE
++ li a1, K0BASE - CACHE_LOCK_SIZE
+ addu a0, a1
+ li a2, CACHE_LOCK_SIZE
+ li a3, CONFIG_SYS_CACHELINE_SIZE
+ move a1, a2
+ icacheop(a0,a1,a2,a3,0x1d)
+
+- jr ra
+-
++ j ra
+ .end mips_cache_lock
+-#endif /* CONFIG_SYS_INIT_RAM_LOCK_MIPS */
++
++#endif /* CONFIG_JzRISC */
+diff --git a/cpu/mips/config.mk b/cpu/mips/config.mk
+index a173c54..8d27e52 100644
+--- a/cpu/mips/config.mk
++++ b/cpu/mips/config.mk
+@@ -25,15 +25,15 @@ MIPSFLAGS:=$(shell \
+ if [ "$v" -lt "14" ]; then \
+ echo "-mcpu=4kc"; \
+ else \
+- echo "-march=4kc -mtune=4kc"; \
++ echo "-march=4kc -mtune=r4600"; \
+ fi)
+
+ ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
+ ENDIANNESS = -EL
+ else
+-ENDIANNESS = -EB
++#ENDIANNESS = -EB
+ endif
+
+-MIPSFLAGS += $(ENDIANNESS)
++MIPSFLAGS += $(ENDIANNESS) -mabicalls -mips32 -O2
+
+ PLATFORM_CPPFLAGS += $(MIPSFLAGS)
+diff --git a/cpu/mips/cpu.c b/cpu/mips/cpu.c
+index d5a1604..48e1cea 100644
+--- a/cpu/mips/cpu.c
++++ b/cpu/mips/cpu.c
+@@ -28,6 +28,12 @@
+ #include <asm/cacheops.h>
+ #include <asm/reboot.h>
+
++#ifdef CONFIG_JZ4740
++#include <asm/jz4740.h>
++#endif
++
++#if !defined (CONFIG_NAND_SPL) && !defined (CONFIG_MSC_SPL)
++
+ #define cache_op(op,addr) \
+ __asm__ __volatile__( \
+ " .set push \n" \
+@@ -40,6 +46,19 @@
+
+ void __attribute__((weak)) _machine_restart(void)
+ {
++#ifdef CONFIG_JZ4740
++ __wdt_select_extalclk();
++ __wdt_select_clk_div64();
++ __wdt_set_data(100);
++ __wdt_set_count(0);
++ __tcu_start_wdt_clock();
++ __wdt_start();
++ while(1);
++#endif
++#if defined(CONFIG_JzRISC)
++ void (*f)(void) = (void *) 0xbfc00000;
++ f();
++#endif
+ }
+
+ int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+@@ -110,3 +129,59 @@ int cpu_eth_init(bd_t *bis)
+ #endif
+ return 0;
+ }
++
++#endif /* !CONFIG_NAND_SPL !CONFIG_MSC_SPL */
++
++#ifdef CONFIG_JzRISC
++void flush_icache_all(void)
++{
++ u32 addr, t = 0;
++
++ asm volatile ("mtc0 $0, $28"); /* Clear Taglo */
++ asm volatile ("mtc0 $0, $29"); /* Clear TagHi */
++
++ for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_ICACHE_SIZE;
++ addr += CONFIG_SYS_CACHELINE_SIZE) {
++ asm volatile (
++ ".set mips3\n\t"
++ " cache %0, 0(%1)\n\t"
++ ".set mips2\n\t"
++ :
++ : "I" (Index_Store_Tag_I), "r"(addr));
++ }
++
++ /* invalicate btb */
++ asm volatile (
++ ".set mips32\n\t"
++ "mfc0 %0, $16, 7\n\t"
++ "nop\n\t"
++ "ori %0,2\n\t"
++ "mtc0 %0, $16, 7\n\t"
++ ".set mips2\n\t"
++ :
++ : "r" (t));
++}
++
++void flush_dcache_all(void)
++{
++ u32 addr;
++
++ for (addr = KSEG0; addr < KSEG0 + CONFIG_SYS_DCACHE_SIZE;
++ addr += CONFIG_SYS_CACHELINE_SIZE) {
++ asm volatile (
++ ".set mips3\n\t"
++ " cache %0, 0(%1)\n\t"
++ ".set mips2\n\t"
++ :
++ : "I" (Index_Writeback_Inv_D), "r"(addr));
++ }
++
++ asm volatile ("sync");
++}
++
++void flush_cache_all(void)
++{
++ flush_dcache_all();
++ flush_icache_all();
++}
++#endif /* CONFIG_JzRISC */
+diff --git a/cpu/mips/start.S b/cpu/mips/start.S
+index 57db589..fa6e352 100644
+--- a/cpu/mips/start.S
++++ b/cpu/mips/start.S
+@@ -23,32 +23,33 @@
+ */
+
+ #include <config.h>
++#include <version.h>
+ #include <asm/regdef.h>
+ #include <asm/mipsregs.h>
++#include <asm/addrspace.h>
++#include <asm/cacheops.h>
+
+- /*
+- * For the moment disable interrupts, mark the kernel mode and
+- * set ST0_KX so that the CPU does not spit fire when using
+- * 64-bit addresses.
+- */
+- .macro setup_c0_status set clr
+- .set push
+- mfc0 t0, CP0_STATUS
+- or t0, ST0_CU0 | \set | 0x1f | \clr
+- xor t0, 0x1f | \clr
+- mtc0 t0, CP0_STATUS
+- .set noreorder
+- sll zero, 3 # ehb
+- .set pop
+- .endm
+-
+- .macro setup_c0_status_reset
+-#ifdef CONFIG_64BIT
+- setup_c0_status ST0_KX 0
+-#else
+- setup_c0_status 0 0
++#ifdef CONFIG_JZ4730
++#include <asm/jz4730.h>
++#endif
++
++#ifdef CONFIG_JZ4740
++#include <asm/jz4740.h>
++#endif
++
++#ifdef CONFIG_JZ4750
++#include <asm/jz4750.h>
++#endif
++
++#ifdef CONFIG_JZ4750D
++#include <asm/jz4750d.h>
++#endif
++
++#if defined(CONFIG_JZ4750) || defined(CONFIG_JZ4750D)
++#define JZ4750_NANDBOOT_CFG0 (0x55555500 | (CFG_NAND_BW8*0xff))
++#define JZ4750_NANDBOOT_CFG1 0x55555555
++#define JZ4750_NANDBOOT_CFG2 ((CFG_NAND_PAGE_SIZE==2048)&0xff0000) | ((CFG_NAND_PAGE_SIZE!=512)&0xff00) | ((CFG_NAND_ROW_CYCLE==3)&0xff)
+ #endif
+- .endm
+
+ #define RVECENT(f,n) \
+ b f; nop
+@@ -61,6 +62,28 @@
+ .globl _start
+ .text
+ _start:
++#if defined(CONFIG_JZ4740)
++#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
++ .word JZ4740_NORBOOT_CFG /* fetched during NOR Boot */
++#else
++#if defined(CONFIG_NAND_SPL)
++ .word JZ4740_NANDBOOT_CFG /* fetched during NAND Boot */
++#endif
++#endif
++#endif /* CONFIG_JZ4740 */
++#if defined(CONFIG_JZ4750) || defined(CONFIG_JZ4750D)
++#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
++ .word JZ4750_NORBOOT_CFG /* fetched during NOR Boot */
++#else
++#if defined(CONFIG_NAND_SPL) && !defined(CONFIG_MSC_SPL)
++ /* First three words fetched by CPU during NAND Boot */
++ .word JZ4750_NANDBOOT_CFG0
++ .word JZ4750_NANDBOOT_CFG1
++ .word JZ4750_NANDBOOT_CFG2
++#endif
++#endif
++#endif /* CONFIG_JZ4750 || CONFIG_JZ4750D */
++#if !defined(CONFIG_JzRISC)
+ RVECENT(reset,0) /* U-boot entry point */
+ RVECENT(reset,1) /* software reboot */
+ #if defined(CONFIG_INCA_IP)
+@@ -213,7 +236,7 @@ _start:
+ .word 0x00000000
+ .word 0x03e00008
+ .word 0x00000000
+- .word 0x00000000
++ .word 0x00000000
+ /* 0xbfc00428 */
+ .word 0xdc870000
+ .word 0xfca70000
+@@ -224,74 +247,192 @@ _start:
+ .word 0x00000000
+ .word 0x03e00008
+ .word 0x00000000
+- .word 0x00000000
++ .word 0x00000000
+ #endif /* CONFIG_PURPLE */
+ .align 4
++#endif /* CONFIG_JzRISC */
++
+ reset:
+
++#if !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL)
++
++#ifdef CONFIG_JZ4730
++
++ /* Disable interrupts */
++ la t0, INTC_IMR
++ li t1, 0xffffffff
++ sw t1, 0(t0)
++
++ /*
++ * Clear SCR.HGP
++ */
++ la t0, CPM_SCR
++ lw t1, 0(t0)
++ ori t1, 0x8
++ xori t1, 0x8
++ sw t1, 0(t0)
++
++ /*
++ * Set usb port0 as host
++ */
++ la t0, HARB_HAPOR
++ lw t1, 0(t0)
++ ori t1, HARB_HAPOR_UCHSEL
++ sw t1, 0(t0)
++
++ /*
++ * Check reset status
++ */
++ la t0, CPM_RSTR
++ lw t1, 0(t0)
++ andi t1, 0x4
++ bnez t1, resume_from_hibernate
++ nop
++#endif /* CONFIG_JZ4730 */
++
++#ifndef CONFIG_NAND_SPL
+ /* Clear watch registers.
+ */
+ mtc0 zero, CP0_WATCHLO
+ mtc0 zero, CP0_WATCHHI
++#endif
+
+- /* WP(Watch Pending), SW0/1 should be cleared. */
+- mtc0 zero, CP0_CAUSE
++ /* STATUS register */
++#ifdef CONFIG_JzRISC
++ /*
++ * CU0=UM=EXL=IE=0, BEV=ERL=1, IP2~7=1
++ */
++ li t0, 0x0040FC04
++ mtc0 t0, CP0_STATUS
++#else
++#ifdef CONFIG_TB0229
++ li k0, ST0_CU0
++#else
++ mfc0 k0, CP0_STATUS
++#endif
++ li k1, ~ST0_IE
++ and k0, k1
++ mtc0 k0, CP0_STATUS
++#endif
+
+- setup_c0_status_reset
++ /* CAUSE register */
++#ifdef CONFIG_JzRISC
++ /* IV=1, use the specical interrupt vector (0x200) */
++ li t1, 0x00800000
++ mtc0 t1, CP0_CAUSE
++#else
++ mtc0 zero, CP0_CAUSE
++#endif
+
++#ifndef CONFIG_JzRISC
+ /* Init Timer */
+ mtc0 zero, CP0_COUNT
+ mtc0 zero, CP0_COMPARE
++#endif
+
+-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
++#endif /* !defined(CONFIG_NAND_U_BOOT) || defined(CONFIG_NAND_SPL) */
++
++#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
+ /* CONFIG0 register */
+ li t0, CONF_CM_UNCACHED
+ mtc0 t0, CP0_CONFIG
+-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
++#endif
+
+- /* Initialize $gp.
++ /* Initialize GOT pointer.
++ */
++ bal 1f
++ nop
++ .word _GLOBAL_OFFSET_TABLE_
++ 1:
++ move gp, ra
++ lw t1, 0(ra)
++ move gp, t1
++
++#ifdef CONFIG_INCA_IP
++ /* Disable INCA-IP Watchdog.
+ */
+- bal 1f
++ la t9, disable_incaip_wdt
++ jalr t9
+ nop
+- .word _gp
+-1:
+- lw gp, 0(ra)
++#endif
+
+-#if !defined(CONFIG_SKIP_LOWLEVEL_INIT)
++/* JzRISC will init external memory in board_init_f,
++ which uses cache as stack and calls into C code. */
++#ifndef CONFIG_JzRISC
+ /* Initialize any external memory.
+ */
+- la t9, lowlevel_init
+- jalr t9
++ la t9, lowlevel_init
++ jalr t9
+ nop
++#endif
+
++#if !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT)
+ /* Initialize caches...
+ */
+- la t9, mips_cache_reset
+- jalr t9
++#ifdef CONFIG_JzRISC
++ .set mips32
++ mtc0 zero, CP0_TAGLO
++ mtc0 zero, CP0_TAGHI
++
++ li t0, K0BASE
++ ori t1, t0, CONFIG_SYS_DCACHE_SIZE
++1:
++ cache Index_Store_Tag_D, 0(t0)
++ bne t0, t1, 1b
++ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
++
++ li t0, K0BASE
++ ori t1, t0, CONFIG_SYS_ICACHE_SIZE
++2:
++ cache Index_Store_Tag_I, 0(t0)
++ bne t0, t1, 2b
++ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
++
++ /* Invalidate BTB */
++ mfc0 t0, CP0_CONFIG, 7
++ nop
++ ori t0, 2
++ mtc0 t0, CP0_CONFIG, 7
+ nop
+
++ .set mips2
++#else
++ la t9, mips_cache_reset
++ jalr t9
++ nop
++#endif
++
+ /* ... and enable them.
+ */
+ li t0, CONF_CM_CACHABLE_NONCOHERENT
+ mtc0 t0, CP0_CONFIG
+-#endif /* !CONFIG_SKIP_LOWLEVEL_INIT */
++ nop
++
++#endif /* !defined(CONFIG_NAND_SPL) && !defined(CONFIG_NAND_U_BOOT) */
+
+ /* Set up temporary stack.
+ */
+-#ifdef CONFIG_SYS_INIT_RAM_LOCK_MIPS
++#ifndef CONFIG_JzRISC
+ li a0, CONFIG_SYS_INIT_SP_OFFSET
+- la t9, mips_cache_lock
+- jalr t9
++ la t9, mips_cache_lock
++ jalr t9
+ nop
+ #endif
+
++#ifdef CONFIG_NAND_SPL
++ la sp, 0x80004000
++ la t9, nand_boot
++ j t9
++ nop
++#else
+ li t0, CONFIG_SYS_SDRAM_BASE + CONFIG_SYS_INIT_SP_OFFSET
+ la sp, 0(t0)
+
+ la t9, board_init_f
+- jr t9
++ j t9
+ nop
+
++
+ /*
+ * void relocate_code (addr_sp, gd, addr_moni)
+ *
+@@ -305,37 +446,28 @@ reset:
+ .globl relocate_code
+ .ent relocate_code
+ relocate_code:
+- move sp, a0 /* Set new stack pointer */
++ move sp, a0 /* Set new stack pointer */
+
+- li t0, CONFIG_SYS_MONITOR_BASE
++ li t0, TEXT_BASE
+ la t3, in_ram
+ lw t2, -12(t3) /* t2 <-- uboot_end_data */
+ move t1, a2
+- move s2, a2 /* s2 <-- destination address */
+
+ /*
+- * Fix $gp:
++ * Fix GOT pointer:
+ *
+- * New $gp = (Old $gp - CONFIG_SYS_MONITOR_BASE) + Destination Address
++ * New GOT-PTR = (old GOT-PTR - TEXT_BASE) + Destination Address
+ */
+ move t6, gp
+- sub gp, CONFIG_SYS_MONITOR_BASE
+- add gp, a2 /* gp now adjusted */
+- sub s1, gp, t6 /* s1 <-- relocation offset */
++ sub gp, TEXT_BASE
++ add gp, a2 /* gp now adjusted */
++ sub t6, gp, t6 /* t6 <-- relocation offset */
+
+ /*
+ * t0 = source address
+ * t1 = target address
+ * t2 = source end address
+ */
+-
+- /*
+- * Save destination address and size for later usage in flush_cache()
+- */
+- move s0, a1 /* save gd in s0 */
+- move a0, t1 /* a0 <-- destination addr */
+- sub a1, t2, t0 /* a1 <-- size */
+-
+ /* On the purple board we copy the code earlier in a special way
+ * in order to solve flash problems
+ */
+@@ -345,47 +477,61 @@ relocate_code:
+ sw t3, 0(t1)
+ addu t0, 4
+ ble t0, t2, 1b
+- addu t1, 4 /* delay slot */
++ addu t1, 4 /* delay slot */
+ #endif
+
+ /* If caches were enabled, we would have to flush them here.
+ */
+-
+- /* a0 & a1 are already set up for flush_cache(start, size) */
+- la t9, flush_cache
+- jalr t9
++#ifdef CONFIG_JzRISC
++ /* flush d-cache */
++ .set mips32
++ li t0, KSEG0
++ addi t1, t0, CONFIG_SYS_DCACHE_SIZE
++2:
++ cache Index_Writeback_Inv_D, 0(t0)
++ bne t0, t1, 2b
++ addi t0, CONFIG_SYS_CACHELINE_SIZE
++
++ sync
++
++ /* flush i-cache */
++ li t0, KSEG0
++ addi t1, t0, CONFIG_SYS_ICACHE_SIZE
++3:
++ cache Index_Invalidate_I, 0(t0)
++ bne t0, t1, 3b
++ addi t0, CONFIG_SYS_CACHELINE_SIZE
++
++ /* Invalidate BTB */
++ mfc0 t0, CP0_CONFIG, 7
++ nop
++ ori t0, 2
++ mtc0 t0, CP0_CONFIG, 7
+ nop
+
++ .set mips0
++#endif
++
+ /* Jump to where we've relocated ourselves.
+ */
+- addi t0, s2, in_ram - _start
+- jr t0
++ addi t0, a2, in_ram - _start
++ j t0
+ nop
+
+- .word _gp
+- .word _GLOBAL_OFFSET_TABLE_
+ .word uboot_end_data
+ .word uboot_end
+ .word num_got_entries
+
+ in_ram:
+- /*
+- * Now we want to update GOT.
+- *
+- * GOT[0] is reserved. GOT[1] is also reserved for the dynamic object
+- * generated by GNU ld. Skip these reserved entries from relocation.
++ /* Now we want to update GOT.
+ */
+ lw t3, -4(t0) /* t3 <-- num_got_entries */
+- lw t4, -16(t0) /* t4 <-- _GLOBAL_OFFSET_TABLE_ */
+- lw t5, -20(t0) /* t5 <-- _gp */
+- sub t4, t5 /* compute offset*/
+- add t4, t4, gp /* t4 now holds relocated _GLOBAL_OFFSET_TABLE_ */
+- addi t4, t4, 8 /* Skipping first two entries. */
++ addi t4, gp, 8 /* Skipping first two entries. */
+ li t2, 2
+ 1:
+ lw t1, 0(t4)
+ beqz t1, 2f
+- add t1, s1
++ add t1, t6
+ sw t1, 0(t4)
+ 2:
+ addi t2, 1
+@@ -396,26 +542,134 @@ in_ram:
+ */
+ lw t1, -12(t0) /* t1 <-- uboot_end_data */
+ lw t2, -8(t0) /* t2 <-- uboot_end */
+- add t1, s1 /* adjust pointers */
+- add t2, s1
++ add t1, t6 /* adjust pointers */
++ add t2, t6
+
+ sub t1, 4
+-1:
+- addi t1, 4
++1: addi t1, 4
+ bltl t1, t2, 1b
+ sw zero, 0(t1) /* delay slot */
+
+- move a0, s0 /* a0 <-- gd */
++ move a0, a1
+ la t9, board_init_r
+- jr t9
+- move a1, s2 /* delay slot */
++ j t9
++ move a1, a2 /* delay slot */
+
+ .end relocate_code
+
++#endif /* CONFIG_NAND_SPL */
++
++#if !defined(CONFIG_JzRISC)
+ /* Exception handlers.
+ */
+ romReserved:
+- b romReserved
++ b romReserved
+
+ romExcHandle:
+- b romExcHandle
++ b romExcHandle
++#endif
++
++#ifdef CONFIG_JZ4730
++
++/* These are the runtime values, modify them according to your platform. */
++#define PLCR1_VAL 0x1b000520
++#define CFCR_VAL 0x0c526220
++
++#define DMCR_VAL0 0x042a3211
++#define DMCR_VAL1 0x05aa3211 /*(DMCR_VAL0|EMC_DMCR_RFSH|EMC_DMCR_MRSET)*/
++
++#define RTCOR_VAL 0x10
++#define RTCSR_VAL 0x83
++
++ /*
++ * cpu was reset from hibernate mode
++ */
++resume_from_hibernate:
++ /*
++ * Init PLL
++ */
++ la t0, 0xB0000000 /* CFCR */
++ li t1, CFCR_VAL
++ sw t1, 0(t0)
++
++ la t0, 0xB0000010 /* PLCR1 */
++ li t1, PLCR1_VAL
++ sw t1, 0(t0)
++ nop;nop;nop;nop
++
++ /* Init caches */
++ .set mips32
++ mtc0 zero, CP0_TAGLO
++ mtc0 zero, CP0_TAGHI
++
++ li t0, K0BASE
++ ori t1, t0, CONFIG_SYS_DCACHE_SIZE
++1:
++ cache Index_Store_Tag_D, 0(t0)
++ cache Index_Store_Tag_I, 0(t0)
++ bne t0, t1, 1b
++ addiu t0, t0, CONFIG_SYS_CACHELINE_SIZE
++
++ /*
++ * Init SDRAM
++ */
++ la t0, 0xB0010070 /* GPALR2 */
++ lw t1, 0(t0)
++ li t2, 0x3FFFFFFF
++ and t1, t2
++ li t2, 0x40000000
++ or t1, t2
++ sw t1, 0(t0)
++
++ la t0, 0xB0010074 /* GPAUR2 */
++ lw t1, 0(t0)
++ li t2, 0xFFFF0000
++ and t1, t2
++ li t2, 0x00005555
++ or t1, t2
++ sw t1, 0(t0)
++
++ la t0, 0xB3010000 /* EMC base address */
++
++ li t1, DMCR_VAL0 /* DMCR */
++ sw t1, 0x80(t0)
++
++ li t1, RTCOR_VAL
++ sh t1, 0x8c(t0) /* RTCOR */
++
++ li t1, RTCSR_VAL
++ sh t1, 0x84(t0) /* RTCSR */
++
++ /* precharge all chip-selects */
++ ori t1, t0, 0xa088
++ sb $0, 0(t1)
++ ori t1, t0, 0xb088
++ sb $0, 0(t1)
++
++ /* delay about 200us */
++ li t1, 0x20000
++1:
++ bnez t1, 1b
++ sub t1, 1
++
++ la t1, DMCR_VAL1 /* DMCR */
++ sw t1, 0x80(t0)
++
++ /* write sdram mode register for each chip-select */
++ ori t1, t0, 0xa088
++ sb $0, 0(t1)
++ ori t1, t0, 0xb088
++ sb $0, 0(t1)
++
++ /*
++ * jump to resume entry point
++ */
++ la t0, CPM_SPR
++ lw t1, 0(t0)
++ li t0, 0x80000000
++ or t0, t1
++
++ j t0
++ nop
++
++#endif /* CONFIG_JZ4730 */
+diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c
+index 426bb95..6e5fbd3 100644
+--- a/drivers/mtd/nand/nand_base.c
++++ b/drivers/mtd/nand/nand_base.c
+@@ -109,6 +109,22 @@ static struct nand_ecclayout nand_oob_16 = {
+ . length = 8}}
+ };
+
++#if defined(CONFIG_JZ4740)
++static struct nand_ecclayout nand_oob_64 = {
++ .eccbytes = 36,
++ .eccpos = {
++ 6, 7, 8, 9, 10, 11, 12, 13,
++ 14, 15, 16, 17, 18, 19, 20, 21,
++ 22, 23, 24, 25, 26, 27, 28, 29,
++ 30, 31, 32, 33, 34, 35, 36, 37,
++ 38, 39, 40, 41},
++ .oobfree ={
++ {.offset = 2,
++ .length = 4},
++ {.offset = 42,
++ .length = 22}}
++};
++#else
+ static struct nand_ecclayout nand_oob_64 = {
+ .eccbytes = 24,
+ .eccpos = {
+@@ -119,6 +135,7 @@ static struct nand_ecclayout nand_oob_64 = {
+ {.offset = 2,
+ .length = 38}}
+ };
++#endif
+
+ static struct nand_ecclayout nand_oob_128 = {
+ .eccbytes = 48,
+@@ -1116,6 +1133,60 @@ static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
+ }
+
+ /**
++ * nand_read_page_hwecc_rs - [REPLACABLE] hardware rs ecc based page read function
++ * @mtd: mtd info structure
++ * @chip: nand chip info structure
++ * @buf: buffer to store read data
++ *
++ * Not for syndrome calculating ecc controllers which need a special oob layout
++ */
++static int nand_read_page_hwecc_rs(struct mtd_info *mtd, struct nand_chip *chip,
++ uint8_t *buf)
++{
++ int i, eccsize = chip->ecc.size;
++ int eccbytes = chip->ecc.bytes;
++ int eccsteps = chip->ecc.steps;
++ uint8_t *p = buf;
++ uint8_t *ecc_calc = chip->buffers->ecccalc;
++ uint8_t *ecc_code = chip->buffers->ecccode;
++ uint32_t *eccpos = chip->ecc.layout->eccpos;
++ uint32_t page;
++ uint8_t flag = 0;
++
++ page = (buf[3]<<24) + (buf[2]<<16) + (buf[1]<<8) + buf[0];
++
++ chip->cmdfunc(mtd, NAND_CMD_READOOB, 0, page);
++ chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
++
++ for (i = 0; i < chip->ecc.total; i++) {
++ ecc_code[i] = chip->oob_poi[CONFIG_SYS_NAND_ECC_POS + i];
++ if (ecc_code[i] != 0xff)
++ flag = 1;
++ }
++
++ eccsteps = chip->ecc.steps;
++ p = buf;
++
++ chip->cmdfunc(mtd, NAND_CMD_RNDOUT, 0x00, -1);
++ for (i = 0 ; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
++ int stat;
++ if (flag) {
++ chip->ecc.hwctl(mtd, NAND_ECC_READ);
++ chip->read_buf(mtd, p, eccsize);
++ stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
++ if (stat < 0)
++ mtd->ecc_stats.failed++;
++ else
++ mtd->ecc_stats.corrected += stat;
++ }
++ else {
++ chip->ecc.hwctl(mtd, NAND_ECC_READ);
++ chip->read_buf(mtd, p, eccsize);
++ }
++ }
++ return 0;
++}
++/**
+ * nand_read_page_syndrome - [REPLACABLE] hardware ecc syndrom based page read
+ * @mtd: mtd info structure
+ * @chip: nand chip info structure
+@@ -1271,9 +1342,17 @@ static int nand_do_read_ops(struct mtd_info *mtd, loff_t from,
+ bufpoi, page);
+ else if (!aligned && NAND_SUBPAGE_READ(chip) && !oob)
+ ret = chip->ecc.read_subpage(mtd, chip, col, bytes, bufpoi);
+- else
++ else {
++#if defined(CONFIG_JZ4740)
++ bufpoi[0] = (uint8_t)page;
++ bufpoi[1] = (uint8_t)(page >> 8);
++ bufpoi[2] = (uint8_t)(page >> 16);
++ bufpoi[3] = (uint8_t)(page >> 24);
++#endif
++
+ ret = chip->ecc.read_page(mtd, chip, bufpoi,
+ page);
++ }
+ if (ret < 0)
+ break;
+
+@@ -2791,8 +2870,13 @@ int nand_scan_tail(struct mtd_info *mtd)
+
+ case NAND_ECC_HW:
+ /* Use standard hwecc read page function ? */
+- if (!chip->ecc.read_page)
++ if (!chip->ecc.read_page) {
++#if defined(CONFIG_JZ4740)
++ chip->ecc.read_page = nand_read_page_hwecc_rs;
++#else
+ chip->ecc.read_page = nand_read_page_hwecc;
++#endif
++ }
+ if (!chip->ecc.write_page)
+ chip->ecc.write_page = nand_write_page_hwecc;
+ if (!chip->ecc.read_oob)
+diff --git a/examples/standalone/mips.lds b/examples/standalone/mips.lds
+index 717b201..d4a45f8 100644
+--- a/examples/standalone/mips.lds
++++ b/examples/standalone/mips.lds
+@@ -23,8 +23,8 @@
+
+ /*
+ OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
+-*/
+ OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
++*/
+ OUTPUT_ARCH(mips)
+ SECTIONS
+ {
+diff --git a/include/asm-mips/addrspace.h b/include/asm-mips/addrspace.h
+index 3a1e6d6..2ee6920 100644
+--- a/include/asm-mips/addrspace.h
++++ b/include/asm-mips/addrspace.h
+@@ -131,7 +131,7 @@
+ * Returns the uncached address of a sdram address
+ */
+ #ifndef __ASSEMBLY__
+-#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229)
++#if defined(CONFIG_SOC_AU1X00) || defined(CONFIG_TB0229) || defined(CONFIG_JzRISC)
+ /* We use a 36 bit physical address map here and
+ cannot access physical memory directly from core */
+ #define UNCACHED_SDRAM(a) (((unsigned long)(a)) | 0x20000000)
+diff --git a/include/asm-mips/global_data.h b/include/asm-mips/global_data.h
+index b2c4891..23f597e 100644
+--- a/include/asm-mips/global_data.h
++++ b/include/asm-mips/global_data.h
+@@ -39,6 +39,17 @@
+ typedef struct global_data {
+ bd_t *bd;
+ unsigned long flags;
++#if defined(CONFIG_JZSOC)
++ /* There are other clocks in the Jz47xx or Jz5730*/
++ unsigned long cpu_clk; /* CPU core clock */
++ unsigned long sys_clk; /* System bus clock */
++ unsigned long per_clk; /* Peripheral bus clock */
++ unsigned long mem_clk; /* Memory bus clock */
++ unsigned long dev_clk; /* Device clock */
++ unsigned long fb_base; /* base address of framebuffer */
++ unsigned long boot_option; /* 1: boot from sd
++ * 5: boot delay for 5 secs*/
++#endif
+ unsigned long baudrate;
+ unsigned long have_console; /* serial_init() was called */
+ phys_size_t ram_size; /* RAM size */
+diff --git a/include/lcd.h b/include/lcd.h
+index 1f85daa..997e246 100644
+--- a/include/lcd.h
++++ b/include/lcd.h
+@@ -181,8 +181,44 @@ typedef struct vidinfo {
+ u_long mmio; /* Memory mapped registers */
+ } vidinfo_t;
+
+-#else
++#elif defined(CONFIG_JZSOC)
++/*
++ * LCD controller stucture for JZSOC: JZ4730 JZ4740
++ */
++struct jz_fb_dma_descriptor {
++ u_long fdadr; /* Frame descriptor address register */
++ u_long fsadr; /* Frame source address register */
++ u_long fidr; /* Frame ID register */
++ u_long ldcmd; /* Command register */
++};
+
++/*
++ * Jz LCD info
++ */
++struct jz_fb_info {
++
++ u_long fdadr0; /* physical address of frame/palette descriptor */
++ u_long fdadr1; /* physical address of frame descriptor */
++
++ /* DMA descriptors */
++ struct jz_fb_dma_descriptor * dmadesc_fblow;
++ struct jz_fb_dma_descriptor * dmadesc_fbhigh;
++ struct jz_fb_dma_descriptor * dmadesc_palette;
++ u_long screen; /* address of frame buffer */
++ u_long palette; /* address of palette memory */
++ u_int palette_size;
++};
++typedef struct vidinfo {
++ ushort vl_col; /* Number of columns (i.e. 640) */
++ ushort vl_row; /* Number of rows (i.e. 480) */
++ u_char vl_bpix; /* Bits per pixel, 0 = 1, 1 = 2, 2 = 4, 3 = 8 */
++
++ struct jz_fb_info jz_fb;
++} vidinfo_t;
++
++extern vidinfo_t panel_info;
++
++#else
+ typedef struct vidinfo {
+ ushort vl_col; /* Number of columns (i.e. 160) */
+ ushort vl_row; /* Number of rows (i.e. 100) */
+@@ -194,7 +230,7 @@ typedef struct vidinfo {
+ void *priv; /* Pointer to driver-specific data */
+ } vidinfo_t;
+
+-#endif /* CONFIG_MPC823, CONFIG_PXA250 or CONFIG_MCC200 or CONFIG_ATMEL_LCD */
++#endif /* CONFIG_MPC823, CONFIG_PXA250, CONFIG_MCC200 or CONFIG_JZ4740 */
+
+ extern vidinfo_t panel_info;
+
+@@ -234,6 +270,7 @@ void lcd_show_board_info(void);
+ #define LCD_COLOR4 2
+ #define LCD_COLOR8 3
+ #define LCD_COLOR16 4
++#define LCD_COLOR32 5
+
+ /*----------------------------------------------------------------------*/
+ #if defined(CONFIG_LCD_INFO_BELOW_LOGO)
+@@ -285,13 +322,22 @@ void lcd_show_board_info(void);
+ # define CONSOLE_COLOR_GREY 14
+ # define CONSOLE_COLOR_WHITE 15 /* Must remain last / highest */
+
+-#else
++#elif LCD_BPP == LCD_COLOR16
+
+ /*
+ * 16bpp color definitions
+ */
+ # define CONSOLE_COLOR_BLACK 0x0000
+-# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
++# define CONSOLE_COLOR_WHITE 0xffff /* Must remain last / highest */
++
++#elif LCD_BPP == LCD_COLOR32
++/*
++ * 18,24,32 bpp color definitions
++ */
++# define CONSOLE_COLOR_BLACK 0x00000000
++# define CONSOLE_COLOR_WHITE 0xffffffff /* Must remain last / highest */
++
++#else
+
+ #endif /* color definitions */
+
+@@ -322,7 +368,7 @@ void lcd_show_board_info(void);
+ #if LCD_BPP == LCD_MONOCHROME
+ # define COLOR_MASK(c) ((c) | (c) << 1 | (c) << 2 | (c) << 3 | \
+ (c) << 4 | (c) << 5 | (c) << 6 | (c) << 7)
+-#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16)
++#elif (LCD_BPP == LCD_COLOR8) || (LCD_BPP == LCD_COLOR16) || (LCD_BPP == LCD_COLOR32)
+ # define COLOR_MASK(c) (c)
+ #else
+ # error Unsupported LCD BPP.
+diff --git a/lib_mips/board.c b/lib_mips/board.c
+index b2d113e..87cb12d 100644
+--- a/lib_mips/board.c
++++ b/lib_mips/board.c
+@@ -49,6 +49,10 @@ DECLARE_GLOBAL_DATA_PTR;
+
+ #undef DEBUG
+
++#if defined(CONFIG_JZSOC)
++extern int jz_board_init(void);
++#endif
++
+ extern int timer_init(void);
+
+ extern int incaip_set_cpuclk(void);
+@@ -78,7 +82,6 @@ int __board_early_init_f(void)
+ }
+ int board_early_init_f(void) __attribute__((weak, alias("__board_early_init_f")));
+
+-
+ static int init_func_ram (void)
+ {
+ #ifdef CONFIG_BOARD_TYPES
+@@ -98,7 +101,6 @@ static int init_func_ram (void)
+
+ static int display_banner(void)
+ {
+-
+ printf ("\n\n%s\n\n", version_string);
+ return (0);
+ }
+@@ -147,6 +149,9 @@ static int init_baudrate (void)
+ typedef int (init_fnc_t) (void);
+
+ init_fnc_t *init_sequence[] = {
++#if defined(CONFIG_JZSOC)
++ jz_board_init, /* init gpio/clocks/dram etc. */
++#endif
+ board_early_init_f,
+ timer_init,
+ env_init, /* initialize environment */
+@@ -162,7 +167,6 @@ init_fnc_t *init_sequence[] = {
+ NULL,
+ };
+
+-
+ void board_init_f(ulong bootflag)
+ {
+ gd_t gd_data, *id;
+@@ -202,6 +206,12 @@ void board_init_f(ulong bootflag)
+ addr &= ~(4096 - 1);
+ debug ("Top of RAM usable for U-Boot at: %08lx\n", addr);
+
++#ifdef CONFIG_LCD
++ /* reserve memory for LCD display (always full pages) */
++ addr = lcd_setmem (addr);
++ gd->fb_base = addr;
++#endif /* CONFIG_LCD */
++
+ /* Reserve memory for U-Boot code, data & bss
+ * round down to next 16 kB limit
+ */
+@@ -349,9 +359,9 @@ void board_init_r (gd_t *id, ulong dest_addr)
+ size = flash_init();
+ display_flash_config (size);
+ bd->bi_flashsize = size;
++ bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+ #endif
+
+- bd->bi_flashstart = CONFIG_SYS_FLASH_BASE;
+ #if CONFIG_SYS_MONITOR_BASE == CONFIG_SYS_FLASH_BASE
+ bd->bi_flashoffset = monitor_flash_len; /* reserved area for U-Boot */
+ #else
+diff --git a/lib_mips/bootm.c b/lib_mips/bootm.c
+index 54af24c..64bcad9 100644
+--- a/lib_mips/bootm.c
++++ b/lib_mips/bootm.c
+@@ -46,7 +46,9 @@ static void linux_env_set (char * env_name, char * env_val);
+ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+ {
+ void (*theKernel) (int, char **, char **, int *);
+- char *commandline = getenv ("bootargs");
++ char *commandline = gd->boot_option == 1 ?
++ getenv ("bootargsfromsd") :
++ getenv ("bootargs");
+ char env_buf[12];
+ char *cp;
+
+@@ -98,6 +100,9 @@ int do_bootm_linux(int flag, int argc, char *argv[], bootm_headers_t *images)
+ }
+
+ /* we assume that the kernel is in place */
++ if (gd->boot_option == 1)
++ printf ("\n *** Booting from mircoSD ***\n");
++
+ printf ("\nStarting kernel ...\n\n");
+
+ theKernel (linux_argc, linux_argv, linux_env, 0);
+diff --git a/lib_mips/time.c b/lib_mips/time.c
+index 07e356d..4654bf4 100644
+--- a/lib_mips/time.c
++++ b/lib_mips/time.c
+@@ -24,6 +24,8 @@
+ #include <common.h>
+ #include <asm/mipsregs.h>
+
++#ifndef CONFIG_JzRISC
++
+ static unsigned long timestamp;
+
+ /* how many counter cycles in a jiffy */
+@@ -96,3 +98,5 @@ ulong get_tbclk(void)
+ {
+ return CONFIG_SYS_HZ;
+ }
++
++#endif /* !CONFIG_JzRISC */
+
--- /dev/null
+diff --git a/drivers/i2c/Makefile b/drivers/i2c/Makefile
+index ef32f13..4e234b4 100644
+--- a/drivers/i2c/Makefile
++++ b/drivers/i2c/Makefile
+@@ -36,6 +36,7 @@ COBJS-$(CONFIG_DRIVER_S3C24X0_I2C) += s3c24x0_i2c.o
+ COBJS-$(CONFIG_S3C44B0_I2C) += s3c44b0_i2c.o
+ COBJS-$(CONFIG_SOFT_I2C) += soft_i2c.o
+ COBJS-$(CONFIG_TSI108_I2C) += tsi108_i2c.o
++COBJS-$(CONFIG_JZSOC_I2C) += jz_i2c.o
+
+ COBJS := $(COBJS-y)
+ SRCS := $(COBJS:.o=.c)
+
--- /dev/null
+diff --git a/Makefile b/Makefile
+index ed848f5..04cd32e 100644
+--- a/Makefile
++++ b/Makefile
+@@ -3448,6 +3448,18 @@ pavo_nand_config : unconfig
+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/qi_lb60/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
++n516_config : unconfig
++ @ >include/config.h
++ @echo "#define CONFIG_N516 1" >>include/config.h
++ @./mkconfig -a n516 mips mips n516
++
++n516_nand_config : unconfig
++ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
++ @echo "Compile NAND boot image for n516"
++ @./mkconfig -a n516 mips mips n516
++ @echo "TEXT_BASE = 0x80100000" > $(obj)board/n516/config.tmp
++ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
++
+ #########################################################################
+ ## MIPS64 5Kc
+ #########################################################################
--- /dev/null
+diff --git a/Makefile b/Makefile
+index a318eb4..7d14b8b 100644
+--- a/Makefile
++++ b/Makefile
+@@ -3448,6 +3448,13 @@ qi_lb60_config : unconfig
+ @echo "TEXT_BASE = 0x80100000" > $(obj)board/n516/config.tmp
+ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
+
++sakc_config : unconfig
++ @echo "#define CONFIG_NAND_U_BOOT" > $(obj)include/config.h
++ @echo "Compile NAND boot image for SAKC"
++ @$(MKCONFIG) -a sakc mips mips sakc
++ @echo "TEXT_BASE = 0x80100000" > $(obj)board/sakc/config.tmp
++ @echo "CONFIG_NAND_U_BOOT = y" >> $(obj)include/config.mk
++
+ #########################################################################
+ ## MIPS64 5Kc
+ #########################################################################
+diff --git a/cpu/mips/Makefile b/cpu/mips/Makefile
+index 33afb66..a177653 100644
+--- a/cpu/mips/Makefile
++++ b/cpu/mips/Makefile
+@@ -35,7 +35,7 @@ COBJS-$(CONFIG_PURPLE) += asc_serial.o
+ COBJS-$(CONFIG_JZSOC) += jz_serial.o jz_i2c.o jz_mmc.o
+ COBJS-$(CONFIG_JZ4740) += jz4740.o jz4740_nand.o
+ COBJS-$(CONFIG_NANONOTE) += nanonote_gpm940b0.o
+-
++COBJS-$(CONFIG_SAKC) += nanonote_gpm940b0.o
+
+ SRCS := $(START:.o=.S) $(SOBJS-y:.o=.S) $(COBJS-y:.o=.c)
+ OBJS := $(addprefix $(obj),$(SOBJS-y) $(COBJS-y))
+
projects / openwrt / staging / mkresin.git / commitdiff