ralink: add support for 2 new mt7620 boards made by buffalo
authorJohn Crispin <john@openwrt.org>
Mon, 28 Oct 2013 06:47:31 +0000 (06:47 +0000)
committerJohn Crispin <john@openwrt.org>
Mon, 28 Oct 2013 06:47:31 +0000 (06:47 +0000)
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 38550

target/linux/ramips/base-files/etc/diag.sh
target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion [new file with mode: 0644]
target/linux/ramips/base-files/etc/uci-defaults/01_leds
target/linux/ramips/base-files/etc/uci-defaults/02_network
target/linux/ramips/base-files/lib/ramips.sh
target/linux/ramips/dts/WHR-300HP2.dts [new file with mode: 0644]
target/linux/ramips/dts/WHR-600D.dts [new file with mode: 0644]
target/linux/ramips/image/Makefile

index bfe53e1d9e198e5a8c7a92964d64db67985c72d8..c6e600424500b06b4c8218a3fde8ffae9da4f922 100755 (executable)
@@ -120,6 +120,12 @@ get_status_led() {
        whr-g300n)
                status_led="whr-g300n:green:router"
                ;;
+       whr-300hp2)
+               status_led="buffalo:green:status"
+               ;;
+       whr-600d)
+               status_led="buffalo:green:status"
+               ;;
        wli-tx4-ag300n)
                status_led="buffalo:blue:power"
                ;;
diff --git a/target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion b/target/linux/ramips/base-files/etc/hotplug.d/usb/10-motion
new file mode 100644 (file)
index 0000000..557698b
--- /dev/null
@@ -0,0 +1 @@
+[ "$ACTION" == "motion" ] && logger webcam motion event
index 7f9ca407222295fdd492b31e0e4e0818ee94bdaf..44951d8e230593049c43a30d5a21bdc43d391365 100755 (executable)
@@ -145,6 +145,11 @@ case $board in
                ucidef_set_led_netdev "eth" "Network" "asus:white:back" "eth0"
                set_wifi_led "asus:blue:wifi"
                ;;
+       whr-300hp2 |\
+       whr-600d)
+               ucidef_set_led_default "power" "power" "buffalo:green:power" "1"
+               ucidef_set_led_default "router" "router" "buffalo:green:router" "1"
+               ;;
 esac
 
 ucidef_commit_leds
index 034d6e61e1702e6b57c88cd59217ec16b6648143..9026700ac95321b1bc824ed5d8502e0459a7eac8 100755 (executable)
@@ -146,6 +146,11 @@ ramips_setup_interfaces()
                ucidef_set_interface_lan "eth0"
                ;;
 
+       whr-300hp2 |\
+       whr-600d)
+               ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+               ;;
+       
        *)
                RT3X5X=`cat /proc/cpuinfo | egrep "(RT3.5|RT5350)"`
                if [ -n "${RT3X5X}" ]; then
index 589b208f36a463e5f7afe958903813bf5e4d0118..0315074f10b2e405dc6a44e6b22121ea7b4dfb9b 100755 (executable)
@@ -208,6 +208,12 @@ ramips_board_detect() {
        *"W502U")
                name="w502u"
                ;;
+       *"WHR-300HP2")
+               name="whr-300hp2"
+               ;;
+       *"WHR-600D")
+               name="whr-600d"
+               ;;
        *"WHR-G300N")
                name="whr-g300n"
                ;;
diff --git a/target/linux/ramips/dts/WHR-300HP2.dts b/target/linux/ramips/dts/WHR-300HP2.dts
new file mode 100644 (file)
index 0000000..1a0b8c3
--- /dev/null
@@ -0,0 +1,138 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Buffalo WHR-300HP2";
+
+       palmbus@10000000 {
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+               
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "en25q64";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "s25fl064k";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x6b0000>;
+                               };
+
+                               partition@700000 {
+                                       label = "usercfg";
+                                       reg = <0x700000 0x100000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                               ralink,function = "gpio";
+                       };
+                       pa {
+                               ralink,group = "pa";
+                               ralink,function = "pa";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+
+               ralink,port-map = "llllw";
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "ephy";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "buffalo:red:power";
+                       gpios = <&gpio0 7 1>;
+               };
+               status {
+                       label = "buffalo:green:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               power2 {
+                       label = "buffalo:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               status2 {
+                       label = "buffalo:orange:status";
+                       gpios = <&gpio0 10 1>;
+               };
+               internet {
+                       label = "buffalo:green:internet";
+                       gpios = <&gpio2 17 1>;
+               };
+               router {
+                       label = "buffalo:green:router";
+                       gpios = <&gpio2 18 1>;
+               };
+               router2 {
+                       label = "buffalo:orange:router";
+                       gpios = <&gpio2 19 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               s1 {
+                       label = "reset";
+                       gpios = <&gpio2 12 1>;
+                       linux,code = <0x100>;
+               };
+               s2 {
+                       label = "aoss";
+                       gpios = <&gpio2 13 1>;
+                       linux,code = <0x101>;
+               };
+               s3 {
+                       label = "ap";
+                       gpios = <&gpio2 14 1>;
+                       linux,code = <0x102>;
+               };
+               s4 {
+                       label = "bridge";
+                       gpios = <&gpio2 15 1>;
+                       linux,code = <0x103>;
+               };
+       };
+};
diff --git a/target/linux/ramips/dts/WHR-600D.dts b/target/linux/ramips/dts/WHR-600D.dts
new file mode 100644 (file)
index 0000000..00d9d03
--- /dev/null
@@ -0,0 +1,134 @@
+/dts-v1/;
+
+/include/ "mt7620a.dtsi"
+
+/ {
+       compatible = "ralink,mt7620a-soc";
+       model = "Buffalo WHR-600D";
+
+       palmbus@10000000 {
+               gpio2: gpio@660 {
+                       status = "okay";
+               };
+
+               spi@b00 {
+                       status = "okay";
+               
+                       m25p80@0 {
+                               #address-cells = <1>;
+                               #size-cells = <1>;
+                               compatible = "en25q64";
+                               reg = <0 0>;
+                               linux,modalias = "m25p80", "mx25l6405d";
+                               spi-max-frequency = <10000000>;
+
+                               partition@0 {
+                                       label = "u-boot";
+                                       reg = <0x0 0x30000>;
+                                       read-only;
+                               };
+
+                               partition@30000 {
+                                       label = "u-boot-env";
+                                       reg = <0x30000 0x10000>;
+                                       read-only;
+                               };
+
+                               factory: partition@40000 {
+                                       label = "factory";
+                                       reg = <0x40000 0x10000>;
+                                       read-only;
+                               };
+
+                               partition@50000 {
+                                       label = "firmware";
+                                       reg = <0x50000 0x6b0000>;
+                               };
+
+                               partition@700000 {
+                                       label = "usercfg";
+                                       reg = <0x700000 0x100000>;
+                               };
+                       };
+               };
+       };
+
+       pinctrl {
+               state_default: pinctrl0 {
+                       gpio {
+                               ralink,group = "i2c", "uartf", "rgmii1", "rgmii2", "wled", "nd_sd";
+                               ralink,function = "gpio";
+                       };
+               };
+       };
+
+       ethernet@10100000 {
+               pinctrl-names = "default";
+               pinctrl-0 = <&ephy_pins>;
+
+               ralink,port-map = "llllw";
+       };
+
+       gsw@10110000 {
+               ralink,port4 = "ephy";
+       };
+
+       gpio-leds {
+               compatible = "gpio-leds";
+               power {
+                       label = "buffalo:red:power";
+                       gpios = <&gpio0 7 1>;
+               };
+               status {
+                       label = "buffalo:green:status";
+                       gpios = <&gpio0 8 1>;
+               };
+               power2 {
+                       label = "buffalo:green:power";
+                       gpios = <&gpio0 9 1>;
+               };
+               status2 {
+                       label = "buffalo:orange:status";
+                       gpios = <&gpio0 10 1>;
+               };
+               internet {
+                       label = "buffalo:green:internet";
+                       gpios = <&gpio2 17 1>;
+               };
+               router {
+                       label = "buffalo:green:router";
+                       gpios = <&gpio2 18 1>;
+               };
+               router2 {
+                       label = "buffalo:orange:router";
+                       gpios = <&gpio2 19 1>;
+               };
+       };
+
+       gpio-keys-polled {
+               compatible = "gpio-keys-polled";
+               #address-cells = <1>;
+               #size-cells = <0>;
+               poll-interval = <20>;
+               s1 {
+                       label = "reset";
+                       gpios = <&gpio2 12 1>;
+                       linux,code = <0x100>;
+               };
+               s2 {
+                       label = "aoss";
+                       gpios = <&gpio2 13 1>;
+                       linux,code = <0x101>;
+               };
+               s3 {
+                       label = "ap";
+                       gpios = <&gpio2 14 1>;
+                       linux,code = <0x102>;
+               };
+               s4 {
+                       label = "bridge";
+                       gpios = <&gpio2 15 1>;
+                       linux,code = <0x103>;
+               };
+       };
+};
index 81f23c7d954860004e284087bf86b9180b2a767c..317ffac32299134a337ecd6bc5182c364296521b 100644 (file)
@@ -614,6 +614,9 @@ Image/Build/Profile/MT7620a=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a,MT7
 Image/Build/Profile/MT7620a_MT7610e=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7610e,MT7620a_MT7610e)
 Image/Build/Profile/MT7620a_MT7530=$(call BuildFirmware/Default8M/$(1),$(1),mt7620a_mt7530,MT7620a_MT7530)
 Image/Build/Profile/RP-N53=$(call BuildFirmware/Default8M/$(1),$(1),rp_n53,RP-N53)
+whr_300hp2_mtd_size=7012352
+Image/Build/Profile/WHR-300HP2=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-300hp2,WHR-300HP2,$(whr_300hp2_mtd_size))
+Image/Build/Profile/WHR-600D=$(call BuildFirmware/CustomFlash/$(1),$(1),whr-600d,WHR-600D,$(whr_300hp2_mtd_size))
 dlink810l_mtd_size=6881280
 Image/Build/Profile/DIR-810L=$(call BuildFirmware/CustomFlash/$(1),$(1),dir-810l,DIR-810L,$(dlink810l_mtd_size))
 
@@ -624,6 +627,8 @@ define Image/Build/Profile/Default
        $(call Image/Build/Profile/MT7620a_MT7530,$(1))
        $(call Image/Build/Profile/RP-N53,$(1))
        $(call Image/Build/Profile/DIR-810L,$(1))
+       $(call Image/Build/Profile/WHR-300HP2,$(1))
+       $(call Image/Build/Profile/WHR-600D,$(1))
 endef
 endif