adds several fixes to etrax, make openssl work on etrax
authorJohn Crispin <john@openwrt.org>
Tue, 26 Aug 2008 11:36:06 +0000 (11:36 +0000)
committerJohn Crispin <john@openwrt.org>
Tue, 26 Aug 2008 11:36:06 +0000 (11:36 +0000)
SVN-Revision: 12393

package/openssl/patches/300-etrax_support.patch [new file with mode: 0644]
target/linux/etrax/Makefile
target/linux/etrax/patches/100-compile_fixes.patch
target/linux/etrax/patches/101-cris-eth-driver.patch [new file with mode: 0644]
target/linux/etrax/patches/102-missing_arch_include.patch [new file with mode: 0644]

diff --git a/package/openssl/patches/300-etrax_support.patch b/package/openssl/patches/300-etrax_support.patch
new file mode 100644 (file)
index 0000000..6343398
--- /dev/null
@@ -0,0 +1,14 @@
+diff -urN openssl-0.9.8h.orig/Configure openssl-0.9.8h/Configure
+--- openssl-0.9.8h.orig/Configure      2008-05-02 01:11:30.000000000 +0200
++++ openssl-0.9.8h/Configure   2008-06-19 13:27:42.000000000 +0200
+@@ -385,6 +385,10 @@
+ "qnx4",       "cc:-DL_ENDIAN -DTERMIO::(unknown):::${x86_gcc_des} ${x86_gcc_opts}:",
+ "qnx6",       "cc:-DL_ENDIAN -DTERMIOS::(unknown)::-lsocket:${x86_gcc_des} ${x86_gcc_opts}:",
++# cris
++"linux-cris", "\$(TARGET_CC):-DL_ENDIAN -DTERMIO -fomit-frame-pointer::-D_REENTRANT::-ldl:BN_LLONG THIRTY_TWO_BIT RC4_CHAR::::::::::::dlfcn:linux-shared:-fpic::.so.\$(SHLIB_MAJOR).\$(SHLIB_MINOR)::",
++
++
+ #### SCO/Caldera targets.
+ #
+ # Originally we had like unixware-*, unixware-*-pentium, unixware-*-p6, etc.
index 8404cc86c982614cc4029b2936962866902f6bd8..543e0b0122d43c4cf163631f0ee60951ae182457 100644 (file)
@@ -15,7 +15,6 @@ LINUX_VERSION:=2.6.25.16
 include $(INCLUDE_DIR)/target.mk
 
 KERNELNAME:="zImage"
-#DEFAULT_PACKAGES += foxboard-utils
 
 define Target/Description
        Build firmware images for the FOXBOARD made by acmesystems.it
index 61cbf1b1da5996daa7c1780f0cdcb58190396ce8..59d47c68376872a80cda852a1b3f01c736b78d1c 100644 (file)
@@ -1,14 +1,29 @@
---- a/arch/cris/arch-v10/boot/Makefile
-+++ b/arch/cris/arch-v10/boot/Makefile
-@@ -2,7 +2,6 @@
+diff -urN linux-2.6.25.7/arch/cris/Makefile linux-2.6.25.7.cris/arch/cris/Makefile
+--- linux-2.6.25.7/arch/cris/Makefile  2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/Makefile     2008-06-24 13:22:48.000000000 +0200
+@@ -33,7 +33,7 @@
+ LD = $(CROSS_COMPILE)ld -mcrislinux
+-OBJCOPYFLAGS := -O binary -R .note -R .comment -S
++OBJCOPYFLAGS := -O binary -R .bss -R .note -R .note.gnu.build-id -R .comment -S
+ CPPFLAGS_vmlinux.lds = -DDRAM_VIRTUAL_BASE=0x$(CONFIG_ETRAX_DRAM_VIRTUAL_BASE)
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/boot/Makefile linux-2.6.25.7.cris/arch/cris/arch-v10/boot/Makefile
+--- linux-2.6.25.7/arch/cris/arch-v10/boot/Makefile    2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/boot/Makefile       2008-06-24 13:23:03.000000000 +0200
+@@ -2,9 +2,6 @@
  # arch/cris/arch-v10/boot/Makefile
  #
  
 -OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
+-
  subdir- := compressed rescue
-@@ -14,7 +13,6 @@
+ targets := Image
+@@ -14,7 +11,6 @@
  
  $(obj)/compressed/vmlinux: $(obj)/Image FORCE
        $(Q)$(MAKE) $(build)=$(obj)/compressed $@
  
  $(obj)/zImage:  $(obj)/compressed/vmlinux
        @cp $< $@
---- a/arch/cris/arch-v10/boot/compressed/Makefile
-+++ b/arch/cris/arch-v10/boot/compressed/Makefile
-@@ -2,12 +2,10 @@
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/Makefile linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/Makefile
+--- linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/Makefile 2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/Makefile    2008-06-24 13:23:14.000000000 +0200
+@@ -2,13 +2,9 @@
  # arch/cris/arch-v10/boot/compressed/Makefile
  #
  
 -CC = gcc-cris -melf $(LINUXINCLUDE)
  ccflags-y += -O2
 -LD = ld-cris
-+LD = $(CROSS_COMPILE)ld -m criself
  ldflags-y += -T $(obj)/decompress.ld
  OBJECTS = $(obj)/head.o $(obj)/misc.o
 -OBJCOPY = objcopy-cris
- OBJCOPYFLAGS = -O binary --remove-section=.bss
+-OBJCOPYFLAGS = -O binary --remove-section=.bss
  
  quiet_cmd_image = BUILD   $@
-@@ -22,10 +20,10 @@
+ cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
+@@ -22,10 +18,10 @@
        $(call if_changed,objcopy)
  
  $(obj)/head.o: $(obj)/head.S .config
 -      @$(CC) -D__ASSEMBLY__ -traditional -c $< -o $@
-+      @$(CC) -D__ASSEMBLY__  -traditional -Wa,--em=criself -c $< -o $@
++      @$(CC) -Iinclude  -D__ASSEMBLY__ -traditional -Wa,--em=criself -c $< -o $@
  
  $(obj)/misc.o: $(obj)/misc.c .config
 -      @$(CC) -D__KERNEL__ -c $< -o $@
-+      @$(CC) -D__KERNEL__ -Wa,--em=criself -c $< -o $@
++      @$(CC) -Iinclude -D__KERNEL__ -Wa,--em=criself -c $< -o $@
  
  $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
        $(call if_changed,image)
---- a/arch/cris/arch-v10/boot/compressed/misc.c
-+++ b/arch/cris/arch-v10/boot/compressed/misc.c
-@@ -5,7 +5,7 @@
-  * adapted for Linux.
-  *
-  * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
-- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
-+ * putstr by Nick Holloway 1993, better putstr by Martin Mares 1995
-  * adaptation for Linux/CRIS Axis Communications AB, 1999
-  *
-  */
-@@ -99,12 +99,12 @@
- static void gzip_mark(void **);
- static void gzip_release(void **);
-  
--static void puts(const char *);
-+static void putstr(const char *);
- /* the "heap" is put directly after the BSS ends, at end */
-   
--extern int end;
--static long free_mem_ptr = (long)&end;
-+extern int _end;
-+static long free_mem_ptr = (long)&_end;
-  
- #include "../../../../../lib/inflate.c"
-@@ -139,7 +139,7 @@
- /* decompressor info and error messages to serial console */
- static void
--puts(const char *s)
-+putstr(const char *s)
- {
- #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
-       while(*s) {
-@@ -209,9 +209,9 @@
- static void
- error(char *x)
- {
--      puts("\n\n");
--      puts(x);
--      puts("\n\n -- System halted\n");
-+      putstr("\n\n");
-+      putstr(x);
-+      putstr("\n\n -- System halted\n");
-       while(1);       /* Halt */
- }
-@@ -257,14 +257,7 @@
-       makecrc();
--      __asm__ volatile ("move vr,%0" : "=rm" (revision));
--      if (revision < 10)
--      {
--              puts("You need an ETRAX 100LX to run linux 2.6\n");
--              while(1);
--      }
--
--      puts("Uncompressing Linux...\n");
-+      putstr("Uncompressing Linux...\n");
-       gunzip();
--      puts("Done. Now booting the kernel.\n");
-+      putstr("Done. Now booting the kernel.\n");
- }
---- a/arch/cris/arch-v10/mm/init.c
-+++ b/arch/cris/arch-v10/mm/init.c
-@@ -184,6 +184,9 @@
-       free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
- }
-+void free_initrd_mem(unsigned long start, unsigned long end)
-+{
-+}
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/decompress.ld linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/decompress.ld
+--- linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/decompress.ld    2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/decompress.ld       2008-06-24 12:57:25.000000000 +0200
+@@ -1,4 +1,4 @@
+-OUTPUT_FORMAT(elf32-us-cris)
++OUTPUT_FORMAT(elf32-cris)
  
- /* Initialize remaps of some I/O-ports. It is important that this
-  * is called before any driver is initialized.
---- a/arch/cris/arch-v10/boot/compressed/head.S
-+++ b/arch/cris/arch-v10/boot/compressed/head.S
+ MEMORY 
+       {
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/head.S linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/head.S
+--- linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/head.S   2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/head.S      2008-06-24 13:24:50.000000000 +0200
 @@ -10,13 +10,14 @@
  
  #define ASSEMBLER_MACROS_ONLY
 +cmd_line_addr:
        .dword 0
  #include "../../lib/hw_settings.S"
---- a/arch/cris/arch-v10/boot/compressed/decompress.ld
-+++ b/arch/cris/arch-v10/boot/compressed/decompress.ld
-@@ -1,4 +1,4 @@
--OUTPUT_FORMAT(elf32-us-cris)
-+OUTPUT_FORMAT(elf32-cris)
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/misc.c linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/misc.c
+--- linux-2.6.25.7/arch/cris/arch-v10/boot/compressed/misc.c   2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/boot/compressed/misc.c      2008-06-24 12:57:25.000000000 +0200
+@@ -5,7 +5,7 @@
+  * adapted for Linux.
+  *
+  * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
+- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
++ * putstr by Nick Holloway 1993, better putstr by Martin Mares 1995
+  * adaptation for Linux/CRIS Axis Communications AB, 1999
+  *
+  */
+@@ -99,12 +99,12 @@
+ static void gzip_mark(void **);
+ static void gzip_release(void **);
+  
+-static void puts(const char *);
++static void putstr(const char *);
  
- MEMORY 
-       {
+ /* the "heap" is put directly after the BSS ends, at end */
+   
+-extern int end;
+-static long free_mem_ptr = (long)&end;
++extern int _end;
++static long free_mem_ptr = (long)&_end;
+  
+ #include "../../../../../lib/inflate.c"
+@@ -139,7 +139,7 @@
+ /* decompressor info and error messages to serial console */
+ static void
+-puts(const char *s)
++putstr(const char *s)
+ {
+ #ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
+       while(*s) {
+@@ -209,9 +209,9 @@
+ static void
+ error(char *x)
+ {
+-      puts("\n\n");
+-      puts(x);
+-      puts("\n\n -- System halted\n");
++      putstr("\n\n");
++      putstr(x);
++      putstr("\n\n -- System halted\n");
+       while(1);       /* Halt */
+ }
+@@ -257,14 +257,7 @@
+       makecrc();
+-      __asm__ volatile ("move vr,%0" : "=rm" (revision));
+-      if (revision < 10)
+-      {
+-              puts("You need an ETRAX 100LX to run linux 2.6\n");
+-              while(1);
+-      }
+-
+-      puts("Uncompressing Linux...\n");
++      putstr("Uncompressing Linux...\n");
+       gunzip();
+-      puts("Done. Now booting the kernel.\n");
++      putstr("Done. Now booting the kernel.\n");
+ }
+diff -urN linux-2.6.25.7/arch/cris/arch-v10/mm/init.c linux-2.6.25.7.cris/arch/cris/arch-v10/mm/init.c
+--- linux-2.6.25.7/arch/cris/arch-v10/mm/init.c        2008-06-16 22:24:36.000000000 +0200
++++ linux-2.6.25.7.cris/arch/cris/arch-v10/mm/init.c   2008-06-24 12:57:25.000000000 +0200
+@@ -184,6 +184,9 @@
+       free_area_init_node(0, &contig_page_data, zones_size, PAGE_OFFSET >> PAGE_SHIFT, 0);
+ }
++void free_initrd_mem(unsigned long start, unsigned long end)
++{
++}
+ /* Initialize remaps of some I/O-ports. It is important that this
+  * is called before any driver is initialized.
diff --git a/target/linux/etrax/patches/101-cris-eth-driver.patch b/target/linux/etrax/patches/101-cris-eth-driver.patch
new file mode 100644 (file)
index 0000000..f003f50
--- /dev/null
@@ -0,0 +1,11 @@
+--- linux-2.6.25.7/drivers/net/cris/eth_v10.c.orig     2008-06-24 13:37:48.000000000 +0200
++++ linux-2.6.25.7/drivers/net/cris/eth_v10.c  2008-06-24 13:37:58.000000000 +0200
+@@ -1707,7 +1707,7 @@
+ static void
+ e100_netpoll(struct net_device* netdev)
+ {
+-      e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev, NULL);
++      e100rxtx_interrupt(NETWORK_DMA_TX_IRQ_NBR, netdev);
+ }
+ #endif
diff --git a/target/linux/etrax/patches/102-missing_arch_include.patch b/target/linux/etrax/patches/102-missing_arch_include.patch
new file mode 100644 (file)
index 0000000..7e86252
--- /dev/null
@@ -0,0 +1,11 @@
+--- linux-2.6.25.7/include/asm-cris/Kbuild.orig        2008-06-23 12:24:03.000000000 +0200
++++ linux-2.6.25.7/include/asm-cris/Kbuild     2008-06-23 12:24:23.000000000 +0200
+@@ -1,7 +1,6 @@
+ include include/asm-generic/Kbuild.asm
+-header-$(CONFIG_ETRAX_ARCH_V10) += arch-v10/
+-header-$(CONFIG_ETRAX_ARCH_V32) += arch-v32/
++header-y += arch-v10/ arch-v32/
+ header-y += ethernet.h
+ header-y += rtc.h