remove fixed phy support, enable most ar7 switch drivers.
authorFlorian Fainelli <florian@openwrt.org>
Thu, 19 Aug 2010 14:56:16 +0000 (14:56 +0000)
committerFlorian Fainelli <florian@openwrt.org>
Thu, 19 Aug 2010 14:56:16 +0000 (14:56 +0000)
SVN-Revision: 22727

target/linux/ar7/config-2.6.32
target/linux/ar7/patches-2.6.32/970-remove_fixed_phy.patch [new file with mode: 0644]

index 59fa6e2dda412c2ec656f66c94f059ba59f4d59c..3e7fb4edde54ecc49d9e277a5d2cfc78b2225b0a 100644 (file)
@@ -1,9 +1,10 @@
 CONFIG_32BIT=y
 # CONFIG_64BIT is not set
+CONFIG_ADM6996_PHY=y
 # CONFIG_ALCHEMY_GPIO_INDIRECT is not set
+CONFIG_AR7=y
 CONFIG_AR7_GPIO=y
 CONFIG_AR7_WDT=y
-CONFIG_AR7=y
 # CONFIG_ARCH_HAS_ILOG2_U32 is not set
 # CONFIG_ARCH_HAS_ILOG2_U64 is not set
 CONFIG_ARCH_HIBERNATION_POSSIBLE=y
@@ -17,8 +18,8 @@ CONFIG_BITREVERSE=y
 CONFIG_BOOT_ELF32=y
 # CONFIG_CAVIUM_OCTEON_REFERENCE_BOARD is not set
 # CONFIG_CAVIUM_OCTEON_SIMULATOR is not set
-CONFIG_CEVT_R4K_LIB=y
 CONFIG_CEVT_R4K=y
+CONFIG_CEVT_R4K_LIB=y
 CONFIG_CFG80211_DEFAULT_PS_VALUE=0
 CONFIG_CMDLINE="rootfstype=squashfs,jffs2"
 CONFIG_CPMAC=y
@@ -28,9 +29,9 @@ CONFIG_CPU_HAS_PREFETCH=y
 CONFIG_CPU_HAS_SYNC=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 # CONFIG_CPU_LOONGSON2E is not set
+CONFIG_CPU_MIPS32=y
 CONFIG_CPU_MIPS32_R1=y
 # CONFIG_CPU_MIPS32_R2 is not set
-CONFIG_CPU_MIPS32=y
 # CONFIG_CPU_MIPS64_R1 is not set
 # CONFIG_CPU_MIPS64_R2 is not set
 CONFIG_CPU_MIPSR1=y
@@ -52,17 +53,16 @@ CONFIG_CPU_SUPPORTS_HIGHMEM=y
 # CONFIG_CPU_TX39XX is not set
 # CONFIG_CPU_TX49XX is not set
 # CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K_LIB=y
 CONFIG_CSRC_R4K=y
+CONFIG_CSRC_R4K_LIB=y
 CONFIG_DECOMPRESS_LZMA=y
 # CONFIG_DM9000 is not set
 CONFIG_DMA_NEED_PCI_MAP_STATE=y
 CONFIG_DMA_NONCOHERENT=y
 CONFIG_EARLY_PRINTK=y
-CONFIG_FIXED_PHY=y
 # CONFIG_FSNOTIFY is not set
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
 CONFIG_GENERIC_CMOS_UPDATE=y
 CONFIG_GENERIC_FIND_LAST_BIT=y
 CONFIG_GENERIC_FIND_NEXT_BIT=y
@@ -78,6 +78,7 @@ CONFIG_HAVE_IDE=y
 CONFIG_HAVE_OPROFILE=y
 CONFIG_HW_RANDOM=y
 CONFIG_INITRAMFS_SOURCE=""
+CONFIG_IP17XX_PHY=y
 CONFIG_IRQ_CPU=y
 CONFIG_KALLSYMS=y
 CONFIG_LEDS_GPIO=y
@@ -89,6 +90,7 @@ CONFIG_LEDS_GPIO=y
 # CONFIG_MACH_TX49XX is not set
 # CONFIG_MACH_VR41XX is not set
 # CONFIG_MIKROTIK_RB532 is not set
+CONFIG_MIPS=y
 # CONFIG_MIPS_COBALT is not set
 CONFIG_MIPS_L1_CACHE_SHIFT=5
 # CONFIG_MIPS_MACHINE is not set
@@ -97,22 +99,20 @@ CONFIG_MIPS_MT_DISABLED=y
 # CONFIG_MIPS_MT_SMP is not set
 # CONFIG_MIPS_MT_SMTC is not set
 # CONFIG_MIPS_SIM is not set
-CONFIG_MIPS=y
 CONFIG_MTD_AR7_PARTS=y
 CONFIG_MTD_CFI_STAA=y
 CONFIG_MTD_PHYSMAP=y
+CONFIG_MVSWITCH_PHY=y
 CONFIG_NO_EXCEPT_FILL=y
 # CONFIG_NO_IOPORT is not set
 # CONFIG_NXP_STB220 is not set
 # CONFIG_NXP_STB225 is not set
 CONFIG_PAGEFLAGS_EXTENDED=y
-# CONFIG_PCI is not set
 CONFIG_PHYLIB=y
 # CONFIG_PMC_MSP is not set
 # CONFIG_PMC_YOSEMITE is not set
 # CONFIG_PNX8550_JBS is not set
 # CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROBE_INITRD_HEADER is not set
 CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SCSI_DMA is not set
 # CONFIG_SERIAL_8250_EXTENDED is not set
@@ -129,6 +129,7 @@ CONFIG_SCHED_OMIT_FRAME_POINTER=y
 # CONFIG_SIBYTE_SENTOSA is not set
 # CONFIG_SIBYTE_SWARM is not set
 CONFIG_SWAP_IO_SPACE=y
+CONFIG_SWCONFIG=y
 CONFIG_SYS_HAS_CPU_MIPS32_R1=y
 CONFIG_SYS_HAS_EARLY_PRINTK=y
 CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
diff --git a/target/linux/ar7/patches-2.6.32/970-remove_fixed_phy.patch b/target/linux/ar7/patches-2.6.32/970-remove_fixed_phy.patch
new file mode 100644 (file)
index 0000000..289be17
--- /dev/null
@@ -0,0 +1,89 @@
+--- a/arch/mips/ar7/platform.c
++++ b/arch/mips/ar7/platform.c
+@@ -33,7 +33,6 @@
+ #include <linux/string.h>
+ #include <linux/etherdevice.h>
+ #include <linux/phy.h>
+-#include <linux/phy_fixed.h>
+ #include <asm/addrspace.h>
+ #include <asm/mach-ar7/ar7.h>
+@@ -294,12 +293,6 @@ static struct physmap_flash_data physmap
+       .width = 2,
+ };
+-static struct fixed_phy_status fixed_phy_status __initdata = {
+-      .link = 1,
+-      .speed = 100,
+-      .duplex = 1,
+-};
+-
+ static struct plat_cpmac_data cpmac_low_data = {
+       .reset_bit = 17,
+       .power_bit = 20,
+@@ -716,11 +709,6 @@ static int __init ar7_register_devices(v
+       }
+       if (ar7_has_high_cpmac()) {
+-              res = fixed_phy_add(PHY_POLL, ar7_is_titan() ? cpmac_high_titan.id : cpmac_high.id,
+-                                              &fixed_phy_status);
+-              if (res && res != -ENODEV)
+-                      return res;
+-
+               cpmac_get_mac(1, ar7_is_titan() ? cpmac_high_data_titan.dev_addr :
+                                               cpmac_high_data.dev_addr);
+               res = platform_device_register(ar7_is_titan() ? &cpmac_high_titan :
+@@ -736,11 +724,6 @@ static int __init ar7_register_devices(v
+       }
+-      res = fixed_phy_add(PHY_POLL, ar7_is_titan() ? cpmac_low_titan.id :
+-                      cpmac_low.id, &fixed_phy_status);
+-      if (res && res != -ENODEV)
+-              return res;
+-
+       cpmac_get_mac(0, ar7_is_titan() ? cpmac_low_data_titan.dev_addr :
+                       cpmac_low_data.dev_addr);
+       res = platform_device_register(ar7_is_titan() ? &cpmac_low_titan :
+--- a/drivers/net/cpmac.c
++++ b/drivers/net/cpmac.c
+@@ -1117,21 +1117,17 @@ static int __devinit cpmac_probe(struct 
+       pdata = pdev->dev.platform_data;
+-      if (external_switch || dumb_switch) {
+-              strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+-              phy_id = pdev->id;
+-      } else {
+-              for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
+-                      if (!(pdata->phy_mask & (1 << phy_id)))
+-                              continue;
+-                      if (!cpmac_mii->phy_map[phy_id])
+-                              continue;
+-                      strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
+-                      break;
+-              }
++      for (phy_id = 0; phy_id < PHY_MAX_ADDR; phy_id++) {
++              if (!(pdata->phy_mask & (1 << phy_id)))
++                      continue;
++              if (!cpmac_mii->phy_map[phy_id])
++                      continue;
++              strncpy(mdio_bus_id, cpmac_mii->id, MII_BUS_ID_SIZE);
++              break;
+       }
+-
++      
+       if (phy_id == PHY_MAX_ADDR) {
++              //This probably wont work as no fixed bus anymore.
+               dev_err(&pdev->dev, "no PHY present, falling back to switch mode\n");
+               strncpy(mdio_bus_id, "0", MII_BUS_ID_SIZE); /* fixed phys bus */
+               phy_id = pdev->id;
+@@ -1268,7 +1264,7 @@ int __devinit cpmac_init(void)
+       }
+       cpmac_mii->phy_mask = ar7_is_titan()? ~(mask | 0x80000000 | 0x40000000):
+-              ~(mask | 0x80000000);
++              ~(mask | 0x80000001);
+       snprintf(cpmac_mii->id, MII_BUS_ID_SIZE, "1");
+       res = mdiobus_register(cpmac_mii);