ramips: use transfer_one instead of transfer_one_message on rt2880 spi
authorJohn Crispin <john@openwrt.org>
Sun, 22 Nov 2015 11:49:04 +0000 (11:49 +0000)
committerJohn Crispin <john@openwrt.org>
Sun, 22 Nov 2015 11:49:04 +0000 (11:49 +0000)
* use kernel buildin transfer_one_message. we only need to implement
transfer_one and set_cs function
* should support use gpio as cs pin
* deselected the spi device when setup and add debug info
* only reset device when first driver probe

Signed-off-by: Michael Lee <igvtee@gmail.com>
SVN-Revision: 47579

target/linux/ramips/patches-3.18/0050-SPI-ralink-add-Ralink-SoC-spi-driver.patch

index 862e24c3681e5d8b9ba52fede865fcc1adafc997..57986d33feffa106fa5713e02a9fc400b3fcb434 100644 (file)
@@ -41,7 +41,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
  spi-s3c24xx-hw-$(CONFIG_SPI_S3C24XX_FIQ) += spi-s3c24xx-fiq.o
 --- /dev/null
 +++ b/drivers/spi/spi-rt2880.c
-@@ -0,0 +1,533 @@
+@@ -0,0 +1,530 @@
 +/*
 + * spi-rt2880.c -- Ralink RT288x/RT305x SPI controller driver
 + *
@@ -66,10 +66,9 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +#include <linux/reset.h>
 +#include <linux/spi/spi.h>
 +#include <linux/platform_device.h>
++#include <linux/gpio.h>
 +
 +#define DRIVER_NAME                   "spi-rt2880"
-+/* only one slave is supported*/
-+#define RALINK_NUM_CHIPSELECTS                1
 +
 +#define RAMIPS_SPI_STAT                       0x00
 +#define RAMIPS_SPI_CFG                        0x10
@@ -169,6 +168,8 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +#define RT2880_SPI_MODE_BITS  (SPI_CPOL | SPI_CPHA | SPI_LSB_FIRST | \
 +              SPI_CS_HIGH)
 +
++static atomic_t hw_reset_count = ATOMIC_INIT(0);
++
 +struct rt2880_spi {
 +      struct spi_master       *master;
 +      void __iomem            *base;
@@ -248,12 +249,14 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      return offset;
 +}
 +
-+static void rt2880_spi_set_cs(struct rt2880_spi *rs, int enable)
++static void rt2880_spi_set_cs(struct spi_device *spi, bool enable)
 +{
++      struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
++
 +      if (enable)
-+              rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
-+      else
 +              rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
++      else
++              rt2880_spi_clrbits(rs, RAMIPS_SPI_CTL, SPICTL_SPIENA);
 +}
 +
 +static int rt2880_spi_wait_ready(struct rt2880_spi *rs, int len)
@@ -269,22 +272,41 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      return -ETIMEDOUT;
 +}
 +
-+static unsigned int
-+rt2880_spi_write_read(struct spi_device *spi, struct spi_transfer *xfer)
++static void rt2880_dump_reg(struct spi_master *master)
 +{
-+      struct rt2880_spi *rs = spidev_to_rt2880_spi(spi);
-+      unsigned count = 0;
-+      u8 *rx = xfer->rx_buf;
-+      const u8 *tx = xfer->tx_buf;
-+      int err;
++      struct rt2880_spi *rs = spi_master_get_devdata(master);
 +
-+      dev_dbg(&spi->dev, "read (%d): %s %s\n", xfer->len,
-+                (tx != NULL) ? "tx" : "  ",
-+                (rx != NULL) ? "rx" : "  ");
++      dev_dbg(&master->dev, "stat: %08x, cfg: %08x, ctl: %08x, " \
++                      "data: %08x, arb: %08x\n",
++                      rt2880_spi_read(rs, RAMIPS_SPI_STAT),
++                      rt2880_spi_read(rs, RAMIPS_SPI_CFG),
++                      rt2880_spi_read(rs, RAMIPS_SPI_CTL),
++                      rt2880_spi_read(rs, RAMIPS_SPI_DATA),
++                      rt2880_spi_read(rs, get_arbiter_offset(master)));
++}
++
++static int rt2880_spi_transfer_one(struct spi_master *master,
++              struct spi_device *spi, struct spi_transfer *xfer)
++{
++      struct rt2880_spi *rs = spi_master_get_devdata(master);
++      unsigned len;
++      const u8 *tx = xfer->tx_buf;
++      u8 *rx = xfer->rx_buf;
++      int err = 0;
++
++      /* change clock speed  */
++      if (unlikely(rs->speed != xfer->speed_hz)) {
++              u32 reg;
++              reg = rt2880_spi_read(rs, RAMIPS_SPI_CFG);
++              reg &= ~SPICFG_SPICLK_PRESCALE_MASK;
++              reg |= rt2880_spi_baudrate_get(spi, xfer->speed_hz);
++              rt2880_spi_write(rs, RAMIPS_SPI_CFG, reg);
++      }
 +
 +      if (tx) {
-+              for (count = 0; count < xfer->len; count++) {
-+                      rt2880_spi_write(rs, RAMIPS_SPI_DATA, tx[count]);
++              len = xfer->len;
++              while (len-- > 0) {
++                      rt2880_spi_write(rs, RAMIPS_SPI_DATA, *tx++);
 +                      rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTWR);
 +                      err = rt2880_spi_wait_ready(rs, 1);
 +                      if (err) {
@@ -295,63 +317,32 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      }
 +
 +      if (rx) {
-+              for (count = 0; count < xfer->len; count++) {
++              len = xfer->len;
++              while (len-- > 0) {
 +                      rt2880_spi_setbits(rs, RAMIPS_SPI_CTL, SPICTL_STARTRD);
 +                      err = rt2880_spi_wait_ready(rs, 1);
 +                      if (err) {
 +                              dev_err(&spi->dev, "RX failed, err=%d\n", err);
 +                              goto out;
 +                      }
-+                      rx[count] = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
++                      *rx++ = (u8) rt2880_spi_read(rs, RAMIPS_SPI_DATA);
 +              }
 +      }
 +
 +out:
-+      return count;
++      return err;
 +}
 +
-+static int rt2880_spi_transfer_one_message(struct spi_master *master,
-+                                         struct spi_message *m)
++/* copy from spi.c */
++static void spi_set_cs(struct spi_device *spi, bool enable)
 +{
-+      struct rt2880_spi *rs = spi_master_get_devdata(master);
-+      struct spi_device *spi = m->spi;
-+      struct spi_transfer *t = NULL;
-+      int status = 0;
-+      int cs_active = 0;
-+
-+      list_for_each_entry(t, &m->transfers, transfer_list) {
-+              if (t->tx_buf == NULL && t->rx_buf == NULL && t->len) {
-+                      dev_err(&spi->dev,
-+                              "message rejected: invalid transfer data buffers\n");
-+                      status = -EIO;
-+                      goto msg_done;
-+              }
-+
-+              if (!cs_active) {
-+                      rt2880_spi_set_cs(rs, 1);
-+                      cs_active = 1;
-+              }
-+
-+              if (t->len)
-+                      m->actual_length += rt2880_spi_write_read(spi, t);
-+
-+              if (t->delay_usecs)
-+                      udelay(t->delay_usecs);
-+
-+              if (t->cs_change) {
-+                      rt2880_spi_set_cs(rs, 0);
-+                      cs_active = 0;
-+              }
-+      }
-+
-+msg_done:
-+      if (cs_active)
-+              rt2880_spi_set_cs(rs, 0);
-+
-+      m->status = status;
-+      spi_finalize_current_message(master);
++      if (spi->mode & SPI_CS_HIGH)
++              enable = !enable;
 +
-+      return 0;
++      if (spi->cs_gpio >= 0)
++              gpio_set_value(spi->cs_gpio, !enable);
++      else if (spi->master->set_cs)
++              spi->master->set_cs(spi, !enable);
 +}
 +
 +static int rt2880_spi_setup(struct spi_device *spi)
@@ -410,6 +401,11 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      if (reg != old_reg)
 +              rt2880_spi_write(rs, arbit_off, reg);
 +
++      /* deselected the spi device */
++      spi_set_cs(spi, false);
++
++      rt2880_dump_reg(master);
++
 +      return 0;
 +}
 +
@@ -508,8 +504,8 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      master->flags = SPI_MASTER_HALF_DUPLEX;
 +      master->setup = rt2880_spi_setup;
 +      master->prepare_message = rt2880_spi_prepare_message;
-+      master->transfer_one_message = rt2880_spi_transfer_one_message;
-+      master->num_chipselect = RALINK_NUM_CHIPSELECTS;
++      master->set_cs = rt2880_spi_set_cs;
++      master->transfer_one = rt2880_spi_transfer_one,
 +
 +      dev_set_drvdata(&pdev->dev, master);
 +
@@ -518,8 +514,8 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      rs->base = base;
 +      rs->clk = clk;
 +
-+      device_reset(&pdev->dev);
-+
++      if (atomic_inc_return(&hw_reset_count) == 1)
++              device_reset(&pdev->dev);
 +
 +      ret = devm_spi_register_master(&pdev->dev, master);
 +      if (ret < 0) {
@@ -547,6 +543,7 @@ Acked-by: John Crispin <blogic@openwrt.org>
 +      rs = spi_master_get_devdata(master);
 +
 +      clk_disable_unprepare(rs->clk);
++      atomic_dec(&hw_reset_count);
 +
 +      return 0;
 +}