port new diag driver to kamikaze
authorFelix Fietkau <nbd@openwrt.org>
Fri, 3 Nov 2006 21:58:08 +0000 (21:58 +0000)
committerFelix Fietkau <nbd@openwrt.org>
Fri, 3 Nov 2006 21:58:08 +0000 (21:58 +0000)
SVN-Revision: 5426

package/broadcom-diag/Makefile [new file with mode: 0644]
package/broadcom-diag/src/Makefile [new file with mode: 0644]
package/broadcom-diag/src/diag.c [new file with mode: 0644]
package/diag/Makefile [deleted file]
package/diag/src/Makefile [deleted file]
package/diag/src/diag.c [deleted file]
target/linux/brcm-2.4/patches/001-bcm47xx.patch
target/linux/brcm-2.6/patches/001-bcm947xx.patch

diff --git a/package/broadcom-diag/Makefile b/package/broadcom-diag/Makefile
new file mode 100644 (file)
index 0000000..9ab377a
--- /dev/null
@@ -0,0 +1,43 @@
+# 
+# Copyright (C) 2006 OpenWrt.org
+#
+# This is free software, licensed under the GNU General Public License v2.
+# See /LICENSE for more information.
+#
+# $Id$
+
+include $(TOPDIR)/rules.mk
+include $(INCLUDE_DIR)/kernel.mk
+
+PKG_NAME:=broadcom-diag
+PKG_RELEASE:=1
+
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)
+
+include $(INCLUDE_DIR)/package.mk
+
+define KernelPackage/diag
+  SECTION:=kernel
+  CATEGORY:=Kernel drivers
+  DEFAULT:=y
+  DEPENDS:=@LINUX_2_4_BRCM||LINUX_2_6_BRCM
+  TITLE:=Driver for router LEDs and Buttons
+  VERSION:=$(PKG_RELEASE)+$(LINUX_VERSION)-$(BOARD)-$(LINUX_RELEASE)
+  FILES:=$(PKG_BUILD_DIR)/diag.$(LINUX_KMOD_SUFFIX)
+endef
+
+define Build/Prepare
+       mkdir -p $(PKG_BUILD_DIR)
+       $(CP) ./src/* $(PKG_BUILD_DIR)/
+endef
+
+define Build/Compile
+       $(MAKE) -C "$(LINUX_DIR)" \
+               CROSS_COMPILE="$(TARGET_CROSS)" \
+               ARCH="$(LINUX_KARCH)" \
+               SUBDIRS="$(PKG_BUILD_DIR)" \
+               EXTRA_CFLAGS="-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include" \
+               modules
+endef
+       
+$(eval $(call KernelPackage,diag))
diff --git a/package/broadcom-diag/src/Makefile b/package/broadcom-diag/src/Makefile
new file mode 100644 (file)
index 0000000..a43f5f3
--- /dev/null
@@ -0,0 +1,18 @@
+# $Id$
+#
+# Makefile for diag driver
+#
+# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
+#
+# This program is free software; you can redistribute it and/or
+# modify it under the terms of the GNU General Public License
+# as published by the Free Software Foundation; either version
+# 2 of the License, or (at your option) any later version.
+#
+
+obj-m := diag.o
+
+ifeq ($(MAKING_MODULES),1)
+
+-include $(TOPDIR)/Rules.make
+endif
diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
new file mode 100644 (file)
index 0000000..b7c6731
--- /dev/null
@@ -0,0 +1,939 @@
+/*
+ * diag.c - GPIO interface driver for Broadcom boards
+ *
+ * Copyright (C) 2006 Mike Baker <mbm@openwrt.org>,
+ *                    Felix Fietkau <nbd@openwrt.org>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * as published by the Free Software Foundation; either version 2
+ * of the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
+ *
+ * $Id:$
+ */
+#include <linux/module.h>
+#include <linux/pci.h>
+#include <linux/kmod.h>
+#include <linux/proc_fs.h>
+#include <linux/timer.h>
+#include <linux/version.h>
+#include <asm/uaccess.h>
+
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <linux/kobject.h>
+#include <linux/workqueue.h>
+#define hotplug_path uevent_helper
+#else
+#include <linux/tqueue.h>
+#define INIT_WORK INIT_TQUEUE
+#define schedule_work schedule_task
+#define work_struct tq_struct
+#define sbh bcm947xx_sbh
+#define sbh_lock bcm947xx_sbh_lock
+#endif
+
+#include <typedefs.h>
+#include <osl.h>
+#include <bcmdevs.h>
+#include <sbutils.h>
+#include <sbconfig.h>
+#include <sbchipc.h>
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+#include <sbmips.h>
+#else
+#include <hndcpu.h>
+#endif
+
+#define MODULE_NAME "diag"
+
+#define MAX_GPIO 8
+#define FLASH_TIME HZ/6
+
+#define EXTIF_ADDR 0x1f000000
+#define EXTIF_UART (EXTIF_ADDR + 0x00800000)
+
+/* For LEDs */
+#define GPIO_TYPE_NORMAL       (0x0 << 24)
+#define GPIO_TYPE_EXTIF        (0x1 << 24)
+#define GPIO_TYPE_MASK         (0xf << 24)
+
+static unsigned int gpiomask = 0;
+module_param(gpiomask, int, 0644);
+
+enum polarity_t {
+       REVERSE = 0,
+       NORMAL = 1,
+};
+
+enum {
+       PROC_BUTTON,
+       PROC_LED,
+       PROC_MODEL,
+       PROC_GPIOMASK
+};
+
+struct prochandler_t {
+       int type;
+       void *ptr;
+};
+
+struct button_t {
+       struct prochandler_t proc;
+       char *name;
+       u16 gpio;
+       u8 polarity;
+       u8 pressed;
+       unsigned long seen;
+};
+
+struct led_t {
+       struct prochandler_t proc;
+       char *name;
+       u32 gpio;
+       u8 polarity;
+       u8 flash;
+       u8 state;
+};
+
+struct platform_t {
+       char *name;
+       struct button_t buttons[MAX_GPIO];
+       struct led_t leds[MAX_GPIO];
+};
+
+enum {
+       /* Linksys */
+       WAP54GV1,
+       WAP54GV3,
+       WRT54GV1,
+       WRT54G,
+       WRTSL54GS,
+       WRT54G3G,
+       
+       /* ASUS */
+       WLHDD,
+       WL300G,
+       WL500G,
+       WL500GD,
+       WL500GP,
+       ASUS_4702,
+       
+       /* Buffalo */
+       WBR2_G54,
+       WHR_G54S,
+       WHR_HP_G54,
+       WHR2_A54G54,
+       WLA2_G54L,
+       BUFFALO_UNKNOWN,
+       BUFFALO_UNKNOWN_4710,
+
+       /* Siemens */
+       SE505V1,
+       SE505V2,
+       
+       /* US Robotics */
+       USR5461,
+
+       /* Dell */
+       TM2300,
+
+       /* Motorola */
+       WE800G,
+       WR850GV1,
+       WR850GV2,
+
+       /* Belkin */
+       BELKIN_UNKNOWN,
+};
+
+static struct platform_t platforms[] = {
+       /* Linksys */
+       [WAP54GV1] = {
+               .name           = "Linksys WAP54G V1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = { 
+                       { .name = "diag",       .gpio = 1 << 3 },
+                       { .name = "wlan",       .gpio = 1 << 4 },
+               },
+       },
+       [WAP54GV3] = {
+               .name           = "Linksys WAP54G V3",
+               .buttons        = {
+                       /* FIXME: verify this */
+                       { .name = "reset",      .gpio = 1 << 7 },
+                       { .name = "ses",        .gpio = 1 << 0 },
+               },
+               .leds           = { 
+                       /* FIXME: diag? */
+                       { .name = "ses",        .gpio = 1 << 1 },
+               },
+       },
+       [WRT54GV1] = {
+               .name           = "Linksys WRT54G V1.x",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = { 
+                       { .name = "diag",       .gpio = 0x13 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+                       { .name = "dmz",        .gpio = 0x12 | GPIO_TYPE_EXTIF, .polarity = NORMAL },
+               },
+       },
+       [WRT54G] = {
+               .name           = "Linksys WRT54G*",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "ses_white",  .gpio = 1 << 2, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       [WRTSL54GS] = {
+               .name           = "Linksys WRTSL54GS",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "ses_white",  .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "ses_orange", .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
+       [WRT54G3G] = {
+               .name           = "Linksys WRT54G3G",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+                       { .name = "3g",         .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = NORMAL },
+                       { .name = "dmz",        .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "3g_green",   .gpio = 1 << 2, .polarity = NORMAL },
+                       { .name = "3g_blue",    .gpio = 1 << 3, .polarity = NORMAL },
+                       { .name = "3g_blink",   .gpio = 1 << 5, .polarity = NORMAL },
+               },
+       },
+       /* Asus */
+       [WLHDD] = {
+               .name           = "ASUS WL-HDD",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       [WL300G] = {
+               .name           = "ASUS WL-500g",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       [WL500G] = {
+               .name           = "ASUS WL-500g",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       [WL500GD] = {
+               .name           = "ASUS WL-500g Deluxe",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       [WL500GP] = {
+               .name           = "ASUS WL-500g Premium",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+                       { .name = "ses",        .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [ASUS_4702] = {
+               .name           = "ASUS (unknown, BCM4702)",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 6 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 0, .polarity = REVERSE },
+               },
+       },
+       /* Buffalo */
+       [WHR_G54S] = {
+               .name           = "Buffalo WHR-G54S",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+                       { .name = "ses",        .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "internal",   .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+               },
+       },
+       [WBR2_G54] = {
+               .name           = "Buffalo WBR2-G54",
+               /* FIXME: verify */
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [WHR_HP_G54] = {
+               .name           = "Buffalo WHR-HP-G54",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+                       { .name = "bridge",     .gpio = 1 << 5 },
+                       { .name = "ses",        .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+                       { .name = "bridge",     .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "ses",        .gpio = 1 << 6, .polarity = REVERSE },
+               },
+       },
+       [WHR2_A54G54] = {
+               .name           = "Buffalo WHR2-A54G54",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
+       [WLA2_G54L] = {
+               .name           = "Buffalo WLA2-G54L",
+               /* FIXME: verify */
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [BUFFALO_UNKNOWN] = {
+               .name           = "Buffalo (unknown)",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       [BUFFALO_UNKNOWN_4710] = {
+               .name           = "Buffalo (unknown, BCM4710)",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 4 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       /* Siemens */
+       [SE505V1] = {
+               .name           = "Siemens SE505 V1",
+               .buttons        = {
+                       /* No usable buttons */
+               },
+               .leds           = {
+                       { .name = "dmz",        .gpio = 1 << 4, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       [SE505V2] = {
+               .name           = "Siemens SE505 V2",
+               .buttons        = {
+                       /* No usable buttons */
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "dmz",        .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = REVERSE },
+               },
+       },
+       /* US Robotics */
+       [USR5461] = {
+               .name           = "U.S. Robotics USR5461",
+               .buttons        = {
+                       /* No usable buttons */
+               },
+               .leds           = {
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = REVERSE },
+                       { .name = "printer",    .gpio = 1 << 1, .polarity = REVERSE },
+               },
+       },
+       /* Dell */
+       [TM2300] = {
+               .name           = "Dell TrueMobile 2300",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
+       /* Motorola */
+       [WE800G] = {
+               .name           = "Motorola WE800G",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 4, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 2, .polarity = REVERSE },
+                       { .name = "wlan_amber", .gpio = 1 << 1, .polarity = NORMAL },
+               },
+       },
+       [WR850GV1] = {
+               .name           = "Motorola WR850G V1",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 0 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 4, .polarity = NORMAL },
+                       { .name = "diag",       .gpio = 1 << 3, .polarity = REVERSE },
+                       { .name = "modem",      .gpio = 1 << 6, .polarity = NORMAL },
+                       { .name = "wlan_red",   .gpio = 1 << 5, .polarity = REVERSE },
+                       { .name = "wlan_green", .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
+       [WR850GV2] = {
+               .name           = "Motorola WR850G V2",
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 5 },
+               },
+               .leds           = {
+                       { .name = "diag",       .gpio = 1 << 1, .polarity = REVERSE },
+                       { .name = "wlan",       .gpio = 1 << 0, .polarity = NORMAL },
+                       { .name = "modem_green",.gpio = 1 << 6, .polarity = REVERSE },
+                       { .name = "modem_red",  .gpio = 1 << 7, .polarity = REVERSE },
+               },
+       },
+       /* Belkin */
+       [BELKIN_UNKNOWN] = {
+               .name           = "Belkin (unknown)",
+               /* FIXME: verify & add detection */
+               .buttons        = {
+                       { .name = "reset",      .gpio = 1 << 7 },
+               },
+               .leds           = {
+                       { .name = "power",      .gpio = 1 << 5, .polarity = NORMAL },
+                       { .name = "wlan",       .gpio = 1 << 3, .polarity = NORMAL },
+                       { .name = "connected",  .gpio = 1 << 0, .polarity = NORMAL },
+               },
+       },
+};
+
+extern void *sbh;
+extern spinlock_t sbh_lock;
+extern char *nvram_get(char *str);
+
+static struct proc_dir_entry *diag, *leds;
+static struct platform_t platform;
+static void led_flash(unsigned long dummy);
+
+#define getvar(str) (nvram_get(str)?:"")
+
+static void set_led_extif(struct led_t *led)
+{
+       volatile u8 *addr = (volatile u8 *) KSEG1ADDR(EXTIF_UART) + (led->gpio & ~GPIO_TYPE_MASK);
+       if (led->state)
+               *addr = 0xFF;
+       else
+               *addr;
+}
+
+static struct platform_t __init *platform_detect(void)
+{
+       char *boardnum, *boardtype, *buf;
+
+       boardnum = getvar("boardnum");
+       boardtype = getvar("boardtype");
+       if (strncmp(getvar("pmon_ver"), "CFE", 3) == 0) {
+               /* CFE based - newer hardware */
+               if (!strcmp(boardnum, "42")) { /* Linksys */
+                       if (!strcmp(boardtype, "0x0101"))
+                               return &platforms[WRT54G3G];
+
+                       if (!strcmp(getvar("et1phyaddr"),"5") && !strcmp(getvar("et1mdcport"), "1"))
+                               return &platforms[WRTSL54GS];
+                       
+                       /* default to WRT54G */
+                       return &platforms[WRT54G];
+               }
+               
+               if (!strcmp(boardnum, "45")) { /* ASUS */
+                       if (!strcmp(boardtype,"0x042f"))
+                               return &platforms[WL500GP];
+                       else
+                               return &platforms[WL500GD];
+               }
+               
+               if (!strcmp(boardnum, "10496"))
+                       return &platforms[USR5461];
+       } else { /* PMON based - old stuff */
+               if (!strncmp(boardtype, "bcm94710dev", 11)) {
+                       if (!strcmp(boardnum, "42"))
+                               return &platforms[WRT54GV1];
+                       if (simple_strtoul(boardnum, NULL, 9) == 2)
+                               return &platforms[WAP54GV1];
+               }
+               if (!strncmp(getvar("hardware_version"), "WL500-", 6))
+                       return &platforms[WL500G];
+               if (!strncmp(getvar("hardware_version"), "WL300-", 6)) {
+                       /* Either WL-300g or WL-HDD, do more extensive checks */
+                       if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+                               (simple_strtoul(getvar("et1phyaddr"), NULL, 9) == 1))
+                               return &platforms[WLHDD];
+                       if ((simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 0) &&
+                               (simple_strtoul(getvar("et1phyaddr"), NULL, 9) == 10))
+                               return &platforms[WL300G];
+               }
+
+               /* unknown asus stuff, probably bcm4702 */
+               if (!strncmp(boardnum, "asusX", 5))
+                       return &platforms[ASUS_4702];
+
+               if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) &&
+                       (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) {
+                       if (!strncmp(getvar("ModelId"),"WE800G", 6))
+                               return &platforms[WE800G];
+                       else
+                               return &platforms[WR850GV1];
+               }
+       }
+
+       if ((buf = (nvram_get("melco_id") ?: nvram_get("buffalo_id")))) {
+               /* Buffalo hardware, check id for specific hardware matches */
+               if (!strcmp(buf, "29bb0332"))
+                       return &platforms[WBR2_G54];
+               if (!strcmp(buf, "29129"))
+                       return &platforms[WLA2_G54L];
+               if (!strcmp(buf, "30189"))
+                       return &platforms[WHR_HP_G54];
+               if (!strcmp(buf, "30182"))
+                       return &platforms[WHR_G54S];
+               if (!strcmp(buf, "290441dd"))
+                       return &platforms[WHR2_A54G54];
+       }
+
+       if (buf || !strcmp(boardnum, "00")) {/* probably buffalo */
+               if (!strncmp(boardtype, "bcm94710ap", 10))
+                       return &platforms[BUFFALO_UNKNOWN_4710];
+               else
+                       return &platforms[BUFFALO_UNKNOWN];
+       }
+
+       if (!strcmp(getvar("CFEver"), "MotoWRv203"))
+               return &platforms[WR850GV2];
+
+       /* not found */
+       return NULL;
+}
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos);
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, void *data);
+static struct file_operations diag_proc_fops = {
+       read: diag_proc_read,
+       write: diag_proc_write
+};
+
+
+
+static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos)
+{
+#ifdef LINUX_2_4
+       struct inode *inode = file->f_dentry->d_inode;
+       struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+       struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+       char *page;
+       int len = 0;
+       
+       if ((page = kmalloc(1024, GFP_KERNEL)) == NULL)
+               return -ENOBUFS;
+       
+       if (dent->data != NULL) {
+               struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+               switch (handler->type) {
+                       case PROC_LED: {
+                               struct led_t * led = (struct led_t *) handler->ptr;
+                               if (led->flash) {
+                                       len = sprintf(page, "f\n");
+                               } else {
+                                       if (led->gpio & GPIO_TYPE_EXTIF) {
+                                               len = sprintf(page, "%d\n", led->state);
+                                       } else {
+                                               int in = (sb_gpioin(sbh) & led->gpio ? 1 : 0);
+                                               int p = (led->polarity == NORMAL ? 0 : 1);
+                                               len = sprintf(page, "%d\n", ((in ^ p) ? 1 : 0));
+                                       }
+                               }
+                               break;
+                       }
+                       case PROC_MODEL:
+                               len = sprintf(page, "%s\n", platform.name);
+                               break;
+                       case PROC_GPIOMASK:
+                               len = sprintf(page, "%d\n", gpiomask);
+                               break;
+               }
+       }
+       len += 1;
+
+       if (*ppos < len) {
+               len = min_t(int, len - *ppos, count);
+               if (copy_to_user(buf, (page + *ppos), len)) {
+                       kfree(page);
+                       return -EFAULT;
+               }
+               *ppos += len;
+       } else {
+               len = 0;
+       }
+
+       return len;
+}
+
+
+static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, void *data)
+{
+#ifdef LINUX_2_4
+       struct inode *inode = file->f_dentry->d_inode;
+       struct proc_dir_entry *dent = inode->u.generic_ip;
+#else
+       struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode);
+#endif
+       char *page;
+       int ret = -EINVAL;
+
+       if ((page = kmalloc(count + 1, GFP_KERNEL)) == NULL)
+               return -ENOBUFS;
+
+       if (copy_from_user(page, buf, count)) {
+               kfree(page);
+               return -EINVAL;
+       }
+       page[count] = 0;
+       
+       if (dent->data != NULL) {
+               struct prochandler_t *handler = (struct prochandler_t *) dent->data;
+               switch (handler->type) {
+                       case PROC_LED: {
+                               struct led_t *led = (struct led_t *) handler->ptr;
+                               int p = (led->polarity == NORMAL ? 0 : 1);
+                               
+                               if (!(led->gpio & GPIO_TYPE_EXTIF) && (led->gpio & gpiomask))
+                                       break;
+
+                               if (page[0] == 'f') {
+                                       led->flash = 1;
+                                       led_flash(0);
+                               } else {
+                                       led->flash = 0;
+                                       if (led->gpio & GPIO_TYPE_EXTIF) {
+                                               led->state = p ^ ((page[0] == '1') ? 1 : 0);
+                                               set_led_extif(led);
+                                       } else {
+                                               sb_gpioouten(sbh, led->gpio, led->gpio, GPIO_DRV_PRIORITY);
+                                               sb_gpiocontrol(sbh, led->gpio, 0, GPIO_DRV_PRIORITY);
+                                               sb_gpioout(sbh, led->gpio, ((p ^ (page[0] == '1')) ? led->gpio : 0), GPIO_DRV_PRIORITY);
+                                       }
+                               }
+                               break;
+                       }
+                       case PROC_GPIOMASK:
+                               gpiomask = simple_strtoul(page, NULL, 16);
+                               break;
+               }
+               ret = count;
+       }
+
+       kfree(page);
+       return ret;
+}
+
+struct event_t {
+       struct work_struct tq;
+       char buf[256];
+       char *argv[3];
+       char *envp[6];
+};
+
+static void hotplug_button(struct event_t *event)
+{
+#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,0)
+       call_usermodehelper (event->argv[0], event->argv, event->envp, 1);
+#else
+       call_usermodehelper (event->argv[0], event->argv, event->envp);
+#endif
+       kfree(event);
+}
+
+static void set_irqenable(int enabled)
+{
+       unsigned int coreidx;
+       unsigned long flags;
+       chipcregs_t *cc;
+
+       spin_lock_irqsave(sbh_lock, flags);
+       coreidx = sb_coreidx(sbh);
+       if ((cc = sb_setcore(sbh, SB_CC, 0))) {
+               int intmask;
+
+               intmask = readl(&cc->intmask);
+               if (enabled)
+                       intmask |= CI_GPIO;
+               else
+                       intmask &= ~CI_GPIO;
+               writel(intmask, &cc->intmask);
+       }
+       sb_setcoreidx(sbh, coreidx);
+       spin_unlock_irqrestore(sbh_lock, flags);
+}
+
+
+static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs)
+{
+       struct button_t *b;
+       int in = sb_gpioin(sbh);
+       struct event_t *event;
+
+       set_irqenable(0);
+       for (b = platform.buttons; b->name; b++) { 
+               if (b->gpio & gpiomask)
+                       continue;
+
+               if (b->polarity != (in & b->gpio)) {
+                       b->pressed ^= 1;
+
+                       if ((event = (struct event_t *)kmalloc (sizeof(struct event_t), GFP_ATOMIC))) {
+                               int i;
+                               char *scratch = event->buf;
+
+                               i = 0;
+                               event->argv[i++] = hotplug_path;
+                               event->argv[i++] = "button";
+                               event->argv[i] = 0;
+
+                               i = 0;
+                               event->envp[i++] = "HOME=/";
+                               event->envp[i++] = "PATH=/sbin:/bin:/usr/sbin:/usr/bin";
+                               event->envp[i++] = scratch;
+                               scratch += sprintf (scratch, "ACTION=%s", b->pressed?"pressed":"released") + 1;
+                               event->envp[i++] = scratch;
+                               scratch += sprintf (scratch, "BUTTON=%s", b->name) + 1;
+                               event->envp[i++] = scratch;
+                               scratch += sprintf (scratch, "SEEN=%ld", (jiffies - b->seen)/HZ) + 1;
+                               event->envp[i] = 0;
+
+                               INIT_WORK(&event->tq, (void *)(void *)hotplug_button, (void *)event);
+                               schedule_work(&event->tq);
+                       }
+
+                       b->seen = jiffies;
+                       b->polarity ^= b->gpio;
+                       sb_gpiointpolarity(sbh, b->gpio, b->polarity, GPIO_DRV_PRIORITY);
+               }
+       }
+       set_irqenable(1);
+       return IRQ_HANDLED;
+}
+
+static struct timer_list led_timer = {
+       function: &led_flash
+};
+
+static void led_flash(unsigned long dummy) {
+       struct led_t *l;
+       unsigned mask = 0;
+       unsigned extif_blink = 0;
+
+       for (l = platform.leds; l->name; l++) {
+               if (l->flash) {
+                       if (l->gpio & GPIO_TYPE_EXTIF) {
+                               extif_blink = 1;
+                               l->state = !l->state;
+                               set_led_extif(l);
+                       } else {
+                               mask |= l->gpio;
+                       }
+               }
+       }
+
+       mask &= ~gpiomask;
+       if (mask) {
+               unsigned val;
+
+               val = ~sb_gpioin(sbh);
+               val &= mask;
+
+               sb_gpioouten(sbh, mask, mask, GPIO_DRV_PRIORITY);
+               sb_gpiocontrol(sbh, mask, 0, GPIO_DRV_PRIORITY);
+               sb_gpioout(sbh, mask, val, GPIO_DRV_PRIORITY);
+       }
+       if (mask || extif_blink) {
+               mod_timer(&led_timer, jiffies + FLASH_TIME);
+       }
+}
+
+static void __init register_buttons(struct button_t *b)
+{
+       int irq = sb_irq(sbh) + 2;
+
+       request_irq(irq, button_handler, SA_SHIRQ | SA_SAMPLE_RANDOM, "gpio", button_handler);
+
+       for (; b->name; b++) {
+               if (b->gpio & gpiomask)
+                       continue;
+
+               sb_gpioouten(sbh, b->gpio,0, GPIO_DRV_PRIORITY);
+               sb_gpiocontrol(sbh, b->gpio,0, GPIO_DRV_PRIORITY);
+               b->polarity = sb_gpioin(sbh) & b->gpio;
+               sb_gpiointpolarity(sbh, b->gpio, b->polarity, GPIO_DRV_PRIORITY);
+               sb_gpiointmask(sbh, b->gpio, b->gpio, GPIO_DRV_PRIORITY);
+       }
+       set_irqenable(1);
+}
+
+static void __exit unregister_buttons(struct button_t *b)
+{
+       int irq = sb_irq(sbh) + 2;
+
+       for (; b->name; b++)
+               sb_gpiointmask(sbh, b->gpio, 0, GPIO_DRV_PRIORITY);
+
+       free_irq(irq, button_handler);
+}
+
+static void __init register_leds(struct led_t *l)
+{
+       struct proc_dir_entry *p;
+
+       leds = proc_mkdir("led", diag);
+       if (!leds) 
+               return;
+
+       for(; l->name; l++) {
+               if (l->gpio & gpiomask)
+                       continue;
+       
+               if (l->gpio & GPIO_TYPE_EXTIF) {
+                       l->state = 0;
+                       set_led_extif(l);
+               } else {
+                       sb_gpioouten(sbh, l->gpio, l->gpio, GPIO_DRV_PRIORITY);
+                       sb_gpiocontrol(sbh, l->gpio, 0, GPIO_DRV_PRIORITY);
+                       sb_gpioout(sbh, l->gpio, (l->polarity == NORMAL)?0:l->gpio, GPIO_DRV_PRIORITY);
+               }
+
+               if ((p = create_proc_entry(l->name, S_IRUSR, leds))) {
+                       l->proc.type = PROC_LED;
+                       l->proc.ptr = l;
+                       p->data = (void *) &l->proc;
+                       p->proc_fops = &diag_proc_fops;
+               }
+       }
+}
+
+static void __exit unregister_leds(struct led_t *l)
+{
+       for(; l->name; l++)
+               remove_proc_entry(l->name, leds);
+
+       remove_proc_entry("led", diag);
+}
+
+static void __exit diag_exit(void)
+{
+
+       del_timer(&led_timer);
+
+       if (platform.buttons)
+               unregister_buttons(platform.buttons);
+
+       if (platform.leds)
+               unregister_leds(platform.leds);
+
+       remove_proc_entry("model", diag);
+       remove_proc_entry("gpiomask", diag);
+       remove_proc_entry("diag", NULL);
+}
+
+static struct prochandler_t proc_model = { .type = PROC_MODEL };
+static struct prochandler_t proc_gpiomask = { .type = PROC_GPIOMASK };
+
+static int __init diag_init(void)
+{
+       static struct proc_dir_entry *p;
+       static struct platform_t *detected;
+
+       detected = platform_detect();
+       if (!detected) {
+               printk(MODULE_NAME ": Router model not detected.\n");
+               return -ENODEV;
+       }
+       memcpy(&platform, detected, sizeof(struct platform_t));
+
+       printk(MODULE_NAME ": Detected '%s'\n", platform.name);
+
+       if (!(diag = proc_mkdir("diag", NULL))) {
+               printk(MODULE_NAME ": proc_mkdir on /proc/diag failed\n");
+               return -EINVAL;
+       }
+
+       if ((p = create_proc_entry("model", S_IRUSR, diag))) {
+               p->data = (void *) &proc_model;
+               p->proc_fops = &diag_proc_fops;
+       }
+
+       if ((p = create_proc_entry("gpiomask", S_IRUSR | S_IWUSR, diag))) {
+               p->data = (void *) &proc_gpiomask;
+               p->proc_fops = &diag_proc_fops;
+       }
+
+       if (platform.buttons)
+               register_buttons(platform.buttons);
+
+       if (platform.leds)
+               register_leds(platform.leds);
+
+       return 0;
+}
+
+module_init(diag_init);
+module_exit(diag_exit);
+
+MODULE_AUTHOR("Mike Baker, Felix Fietkau / OpenWrt.org");
+MODULE_LICENSE("GPL");
diff --git a/package/diag/Makefile b/package/diag/Makefile
deleted file mode 100644 (file)
index c182321..0000000
+++ /dev/null
@@ -1,48 +0,0 @@
-# 
-# Copyright (C) 2006 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-# $Id$
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=kmod-diag
-PKG_RELEASE:=1
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/kmod-diag
-  SECTION:=kernel
-  CATEGORY:=Kernel drivers
-  DEFAULT:=y
-  DEPENDS:=@LINUX_2_4_BRCM
-  TITLE:=Driver for router LEDs and Buttons
-  VERSION:=$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE)
-endef
-
-define Build/Prepare
-       mkdir -p $(PKG_BUILD_DIR)
-       $(CP) ./src/* $(PKG_BUILD_DIR)/
-endef
-
-define Build/Compile
-       $(MAKE) -C "$(LINUX_DIR)" \
-               CROSS_COMPILE="$(TARGET_CROSS)" \
-               ARCH="$(LINUX_KARCH)" \
-               SUBDIRS="$(PKG_BUILD_DIR)" \
-               EXTRA_CFLAGS="-DBCMDRIVER -I$(LINUX_DIR)/arch/mips/bcm947xx/include" \
-               modules
-endef
-       
-define Package/kmod-diag/install
-       install -d -m0755 $(1)/lib/modules/$(LINUX_VERSION)
-       $(CP) $(PKG_BUILD_DIR)/diag.$(LINUX_KMOD_SUFFIX) \
-               $(1)/lib/modules/$(LINUX_VERSION)/
-endef
-
-$(eval $(call BuildPackage,kmod-diag))
diff --git a/package/diag/src/Makefile b/package/diag/src/Makefile
deleted file mode 100644 (file)
index 169f2e9..0000000
+++ /dev/null
@@ -1,19 +0,0 @@
-# $Id$
-#
-# Makefile for diag driver
-#
-# Copyright (C) 2005 Felix Fietkau <nbd@openwrt.org>
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License
-# as published by the Free Software Foundation; either version
-# 2 of the License, or (at your option) any later version.
-#
-
-obj-m := diag.o
-
-ifeq ($(MAKING_MODULES),1)
-export-objs := diag.o
-
--include $(TOPDIR)/Rules.make
-endif
diff --git a/package/diag/src/diag.c b/package/diag/src/diag.c
deleted file mode 100644 (file)
index d25f749..0000000
+++ /dev/null
@@ -1,284 +0,0 @@
-/*
- * diag_led.c - replacement diag module
- *
- * Copyright (C) 2004 Mike Baker,
- *                    Imre Kaloz <kaloz@dune.hu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version 2
- * of the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA  02111-1307, USA.
- *
- * $Id$
- */
-
-/*
- * ChangeLog:
- * 2004/03/28 initial release 
- * 2004/08/26 asus & buffalo support added
- * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
- * 2005/04/13 added licensing informations
- * 2005/04/18 base reset polarity off initial readings
- * 2006/02/07 motorola wa840g/we800g support added
- * 2006/08/18 asus power led support added
- */
-
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/sysctl.h>
-#include <asm/io.h>
-#include <typedefs.h>
-#include <osl.h>
-#include <bcmdevs.h>
-#include <sbutils.h>
-
-extern char * nvram_get(const char *name);
-static void *sbh;
-
-// v2.x - - - - -
-#define DIAG_GPIO (1<<1)
-#define DMZ_GPIO  (1<<7)
-
-static void set_gpio(uint32 mask, uint32 value) {
-       sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
-       sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
-       sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
-}
-
-static void v2_set_diag(u8 state) {
-       set_gpio(DIAG_GPIO,state);
-}
-static void v2_set_dmz(u8 state) {
-       set_gpio(DMZ_GPIO,state);
-}
-
-// asus wl-500g (+deluxe)
-#define ASUS_PWR_GPIO (1<<0)
-
-static void asus_set_pwr(u8 state) {
-       set_gpio(ASUS_PWR_GPIO,state);
-}
-
-// v1.x - - - - -
-#define LED_DIAG   0x13
-#define LED_DMZ    0x12
-
-static void v1_set_diag(u8 state) {
-       if (!state) {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF;
-       } else {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG);
-       }
-}
-static void v1_set_dmz(u8 state) {
-       if (!state) {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF;
-       } else {
-               *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ);
-       }
-}
-
-static void wap1_set_diag(u8 state) {
-       set_gpio(1<<3,state);
-}
-static void wap1_set_dmz(u8 state) {
-       set_gpio(1<<4,state);
-}
-
-// - - - - -
-static void ignore(u8 ignored) {};
-
-// - - - - -
-#define BIT_DMZ         0x01
-#define BIT_PWR                0x02
-#define BIT_DIAG        0x04
-
-void (*set_diag)(u8 state);
-void (*set_dmz)(u8 state);
-void (*set_pwr)(u8 state);
-
-static unsigned int diag = 0x02; // default: diag off, pwr on, dmz off
-
-static void diag_change(void)
-{
-       set_diag(0xFF); // off
-       set_dmz(0xFF); // off
-       set_pwr(0xFF); // off
-
-       if(diag & BIT_DIAG)
-               set_diag(0x00); // on
-       if(diag & BIT_DMZ)
-               set_dmz(0x00); // on
-       if (diag & BIT_PWR)
-               set_pwr(0x00);  //on
-}
-
-static int proc_diag(ctl_table *table, int write, struct file *filp,
-               void *buffer, size_t *lenp)
-{
-       int r;
-       r = proc_dointvec(table, write, filp, buffer, lenp);
-       if (write && !r) {
-               diag_change();
-       }
-       return r;
-}
-
-// - - - - -
-static unsigned char reset_gpio = 0;
-static unsigned char reset_polarity = 0;
-static unsigned int reset = 0;
-
-static int proc_reset(ctl_table *table, int write, struct file *filp,
-               void *buffer, size_t *lenp)
-{
-
-       if (reset_gpio) {
-               sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-               sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-               reset=!(sb_gpioin(sbh)&reset_gpio);
-
-               if (reset_polarity) reset=!reset;
-       } else {
-               reset=0;
-       }
-
-       return proc_dointvec(table, write, filp, buffer, lenp);
-}
-
-// - - - - -
-static struct ctl_table_header *diag_sysctl_header;
-
-static ctl_table sys_diag[] = {
-         { 
-          ctl_name: 2000,
-          procname: "diag", 
-          data: &diag,
-          maxlen: sizeof(diag), 
-          mode: 0644,
-          proc_handler: proc_diag
-        },
-        {
-          ctl_name: 2001,
-          procname: "reset",
-          data: &reset,
-          maxlen: sizeof(reset),
-          mode: 0444,
-          proc_handler: proc_reset 
-        },
-         { 0 }
-};
-
-static int __init diag_init(void)
-{
-       char *buf;
-       u32 board_type;
-       sbh = (void *)sb_kattach();
-       sb_gpiosetcore(sbh);
-
-       board_type = sb_boardtype(sbh);
-       printk(KERN_INFO "diag boardtype: %08x\n",board_type);
-
-       set_diag=ignore;
-       set_dmz=ignore;
-       set_pwr=ignore;
-       
-       buf=nvram_get("pmon_ver") ?: "";
-       if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
-               buf=nvram_get("boardtype")?:"";
-               if (!strncmp(buf,"bcm94710dev",11)) {
-                       buf=nvram_get("boardnum")?:"";
-                       if (!strcmp(buf,"42")) {
-                               // wrt54g v1.x
-                               set_diag=v1_set_diag;
-                               set_dmz=v1_set_dmz;
-                               reset_gpio=(1<<6);
-                       }
-                       if (simple_strtoul(buf, NULL, 0) == 2) {
-                               // wap54g v1.0
-                               // do not use strcmp as PMON v5.3.22 has some built-in nvram 
-                               // defaults with trailing \r
-                               set_diag=wap1_set_diag;
-                               // no dmz led on wap54g, used green led 
-                               // labeled "WLAN Link" instead
-                               set_dmz=wap1_set_dmz;
-                               reset_gpio=(1<<0);
-                       }
-                       if (!strcmp(buf,"asusX")) {
-                               //asus wl-500g
-                               set_pwr=asus_set_pwr;
-                               reset_gpio=(1<<6);
-                       }
-                       if (!strcmp(buf,"2")) {
-                               //wa840g v1 / we800g v1
-                               reset_gpio=(1<<0);
-                       }
-               }
-               if (!strcmp(buf,"bcm94710ap")) {
-                       buf=nvram_get("boardnum")?:"";
-                       if (!strcmp(buf,"42")) {
-                               // buffalo
-                               set_dmz=v2_set_dmz;
-                               reset_gpio=(1<<4);
-                       }
-                       if (!strcmp(buf,"44")) {
-                               //dell truemobile
-                               set_dmz=v2_set_dmz;
-                               reset_gpio=(1<<0);
-                       }
-               }
-       } else {
-               buf=nvram_get("boardnum")?:"";
-               if (!strcmp(buf,"42")) {
-                       //linksys
-                       set_diag=v2_set_diag;
-                       set_dmz=v2_set_dmz;
-                       reset_gpio=(1<<6);
-               }
-               if (!strcmp(buf,"44")) {
-                       //motorola
-                       reset_gpio=(1<<5);
-               }
-               if (!strcmp(buf,"00")) {
-                       //buffalo
-                       reset_gpio=(1<<7);
-               }
-               if (!strcmp(buf,"45")) {
-                       //wl-500g deluxe
-                       set_pwr=asus_set_pwr;
-                       reset_gpio=(1<<6);
-               }
-       }
-
-       
-       sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
-       sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
-       reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
-
-       diag_sysctl_header = register_sysctl_table(sys_diag, 0);
-       diag_change();
-
-       return 0;
-}
-
-static void __exit diag_exit(void)
-{
-       unregister_sysctl_table(diag_sysctl_header);
-}
-
-EXPORT_NO_SYMBOLS;
-MODULE_AUTHOR("openwrt.org");
-MODULE_LICENSE("GPL");
-
-module_init(diag_init);
-module_exit(diag_exit);
index 17e4bf9ef2e5ffc6dc51fc8f3b5c1f0b40c775d3..98195f55dbd41885335c96463579e9fc6f89b1eb 100644 (file)
@@ -1743,7 +1743,7 @@ diff -urN linux.old/arch/mips/bcm947xx/compressed/Makefile linux.dev/arch/mips/b
 diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/export.c
 --- linux.old/arch/mips/bcm947xx/export.c      1970-01-01 01:00:00.000000000 +0100
 +++ linux.dev/arch/mips/bcm947xx/export.c      2006-10-02 21:19:59.000000000 +0200
-@@ -0,0 +1,65 @@
+@@ -0,0 +1,70 @@
 +#include <linux/module.h>
 +
 +#define _export(n) \
@@ -1772,17 +1772,21 @@ diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/exp
 +_export(sb_coreflags)
 +_export(sb_coreflagshi)
 +_export(sb_coreidx)
++_export(sb_coreregs)
 +_export(sb_corerev)
 +_export(sb_coreunit)
 +_export(sb_detach)
 +_export(sb_deviceremoved)
 +_export(sb_gpiosetcore)
 +_export(sb_gpiocontrol)
++_export(sb_gpiointmask)
++_export(sb_gpiointpolarity)
 +_export(sb_gpioled)
 +_export(sb_gpioin)
 +_export(sb_gpioout)
 +_export(sb_gpioouten)
 +_export(sb_gpiotimerval)
++_export(sb_irq)
 +_export(sb_iscoreup)
 +_export(sb_pci_setup)
 +_export(sb_pcirev)
@@ -1790,6 +1794,7 @@ diff -urN linux.old/arch/mips/bcm947xx/export.c linux.dev/arch/mips/bcm947xx/exp
 +_export(sb_pcmciarev)
 +_export(sb_register_intr_callback)
 +_export(sb_setcore)
++_export(sb_setcoreidx)
 +_export(sb_war16165)
 +_export(sb_osh)
 +              
index 5e855be92f92331cc6222da2b6104ed754551dc0..8c077adce8cf35a08b78f72c7b895a41c1bb561a 100644 (file)
@@ -1,6 +1,6 @@
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c
 --- linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmsrom.c    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,481 @@
 +/*
 + *  Misc useful routines to access NIC SROM/OTP .
@@ -485,7 +485,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmsrom.c linux.dev/arch/mips/bc
 +
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c
 --- linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c   1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c   2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/bcmutils.c   2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,356 @@
 +/*
 + * Misc useful OS-independent routines.
@@ -845,7 +845,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/bcmutils.c linux.dev/arch/mips/b
 +#endif
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/cfe_env.c linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c
 --- linux.old/arch/mips/bcm947xx/broadcom/cfe_env.c    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/cfe_env.c    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,234 @@
 +/*
 + * NVRAM variable manipulation (Linux kernel half)
@@ -1083,7 +1083,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/cfe_env.c linux.dev/arch/mips/bc
 +
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c
 --- linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c  1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c  2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/linux_osl.c  2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,102 @@
 +/*
 + * Linux OS Independent Layer
@@ -1189,7 +1189,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/linux_osl.c linux.dev/arch/mips/
 +
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/Makefile linux.dev/arch/mips/bcm947xx/broadcom/Makefile
 --- linux.old/arch/mips/bcm947xx/broadcom/Makefile     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/Makefile     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,6 @@
 +#
 +# Makefile for the BCM47xx specific kernel interface routines
@@ -1199,7 +1199,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/Makefile linux.dev/arch/mips/bcm
 +obj-y := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o sflash.o nvram.o cfe_env.o
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/nvram.c linux.dev/arch/mips/bcm947xx/broadcom/nvram.c
 --- linux.old/arch/mips/bcm947xx/broadcom/nvram.c      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/nvram.c      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,192 @@
 +/*
 + * NVRAM variable manipulation (Linux kernel half)
@@ -1395,7 +1395,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/nvram.c linux.dev/arch/mips/bcm9
 +EXPORT_SYMBOL(nvram_get);
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbmips.c linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c
 --- linux.old/arch/mips/bcm947xx/broadcom/sbmips.c     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c     2006-10-15 23:46:15.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbmips.c     2006-11-03 21:19:49.000000000 +0100
 @@ -0,0 +1,1115 @@
 +/*
 + * BCM47XX Sonics SiliconBackplane MIPS core routines
@@ -2511,11 +2511,10 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbmips.c linux.dev/arch/mips/bcm
 +      return rate;
 +}
 +
-+
-
++EXPORT_SYMBOL(sb_irq);
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbpci.c linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c
 --- linux.old/arch/mips/bcm947xx/broadcom/sbpci.c      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbpci.c      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,534 @@
 +/*
 + * Low-Level PCI and SB support for BCM47xx
@@ -3053,8 +3052,8 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbpci.c linux.dev/arch/mips/bcm9
 +
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c
 --- linux.old/arch/mips/bcm947xx/broadcom/sbutils.c    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c    2006-10-15 23:29:14.000000000 +0200
-@@ -0,0 +1,2371 @@
++++ linux.dev/arch/mips/bcm947xx/broadcom/sbutils.c    2006-11-03 21:22:22.000000000 +0100
+@@ -0,0 +1,2375 @@
 +/*
 + * Misc utility routines for accessing chip-specific features
 + * of the SiliconBackplane-based Broadcom chips.
@@ -5413,6 +5412,10 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bc
 +
 +EXPORT_SYMBOL(sb_boardtype);
 +EXPORT_SYMBOL(sb_boardvendor);
++EXPORT_SYMBOL(sb_corereg);
++EXPORT_SYMBOL(sb_coreidx);
++EXPORT_SYMBOL(sb_setcore);
++EXPORT_SYMBOL(sb_setcoreidx);
 +EXPORT_SYMBOL(sb_gpiocontrol);
 +EXPORT_SYMBOL(sb_gpioin);
 +EXPORT_SYMBOL(sb_gpiointmask);
@@ -5428,7 +5431,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/sbutils.c linux.dev/arch/mips/bc
 +EXPORT_SYMBOL(sb_kattach);
 diff -urN linux.old/arch/mips/bcm947xx/broadcom/sflash.c linux.dev/arch/mips/bcm947xx/broadcom/sflash.c
 --- linux.old/arch/mips/bcm947xx/broadcom/sflash.c     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/broadcom/sflash.c     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,418 @@
 +/*
 + * Broadcom SiliconBackplane chipcommon serial flash interface
@@ -5850,7 +5853,7 @@ diff -urN linux.old/arch/mips/bcm947xx/broadcom/sflash.c linux.dev/arch/mips/bcm
 +
 diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm947xx/include/bcmdevs.h
 --- linux.old/arch/mips/bcm947xx/include/bcmdevs.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmdevs.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,391 @@
 +/*
 + * Broadcom device-specific manifest constants.
@@ -6245,7 +6248,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bcmdevs.h linux.dev/arch/mips/bcm
 +#endif /* _BCMDEVS_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/bcm947xx/include/bcmendian.h
 --- linux.old/arch/mips/bcm947xx/include/bcmendian.h   1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h   2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmendian.h   2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,152 @@
 +/*
 + * local version of endian.h - byte order defines
@@ -6401,7 +6404,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bcmendian.h linux.dev/arch/mips/b
 +#endif /* _BCMENDIAN_H_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bcm947xx/include/bcmnvram.h
 --- linux.old/arch/mips/bcm947xx/include/bcmnvram.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmnvram.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,95 @@
 +/*
 + * NVRAM variable manipulation
@@ -6500,7 +6503,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bcmnvram.h linux.dev/arch/mips/bc
 +#endif /* _bcmnvram_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm947xx/include/bcmsrom.h
 --- linux.old/arch/mips/bcm947xx/include/bcmsrom.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmsrom.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,23 @@
 +/*
 + * Misc useful routines to access NIC local SROM/OTP .
@@ -6527,7 +6530,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bcmsrom.h linux.dev/arch/mips/bcm
 +#endif        /* _bcmsrom_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bcm947xx/include/bcmutils.h
 --- linux.old/arch/mips/bcm947xx/include/bcmutils.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bcmutils.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,308 @@
 +/*
 + * Misc useful os-independent macros and functions.
@@ -6839,7 +6842,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bcmutils.h linux.dev/arch/mips/bc
 +#endif        /* _bcmutils_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bcm947xx/include/bitfuncs.h
 --- linux.old/arch/mips/bcm947xx/include/bitfuncs.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/bitfuncs.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,85 @@
 +/*
 + * bit manipulation utility functions
@@ -6928,7 +6931,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/bitfuncs.h linux.dev/arch/mips/bc
 +#endif /* _BITFUNCS_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm947xx/include/flash.h
 --- linux.old/arch/mips/bcm947xx/include/flash.h       1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/flash.h       2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/flash.h       2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,188 @@
 +/*
 + * flash.h: Common definitions for flash access.
@@ -7120,7 +7123,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/flash.h linux.dev/arch/mips/bcm94
 +#endif
 diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bcm947xx/include/flashutl.h
 --- linux.old/arch/mips/bcm947xx/include/flashutl.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/flashutl.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/flashutl.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,27 @@
 +/*
 + * BCM47XX FLASH driver interface
@@ -7151,7 +7154,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/flashutl.h linux.dev/arch/mips/bc
 +#endif /* _flashutl_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm947xx/include/hndmips.h
 --- linux.old/arch/mips/bcm947xx/include/hndmips.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/hndmips.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/hndmips.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,16 @@
 +/*
 + * Alternate include file for HND sbmips.h since CFE also ships with
@@ -7171,7 +7174,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/hndmips.h linux.dev/arch/mips/bcm
 +#include "sbmips.h"
 diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/bcm947xx/include/linux_osl.h
 --- linux.old/arch/mips/bcm947xx/include/linux_osl.h   1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h   2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/linux_osl.h   2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,331 @@
 +/*
 + * Linux OS Independent Layer
@@ -7506,7 +7509,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/linux_osl.h linux.dev/arch/mips/b
 +#endif        /* _linux_osl_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bcm947xx/include/linuxver.h
 --- linux.old/arch/mips/bcm947xx/include/linuxver.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/linuxver.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/linuxver.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,389 @@
 +/*
 + * Linux-specific abstractions to gain some independence from linux kernel versions.
@@ -7899,7 +7902,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/linuxver.h linux.dev/arch/mips/bc
 +#endif /* _linuxver_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm947xx/include/mipsinc.h
 --- linux.old/arch/mips/bcm947xx/include/mipsinc.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/mipsinc.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,552 @@
 +/*
 + * HND Run Time Environment for standalone MIPS programs.
@@ -8455,7 +8458,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/mipsinc.h linux.dev/arch/mips/bcm
 +#endif        /* _MISPINC_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947xx/include/osl.h
 --- linux.old/arch/mips/bcm947xx/include/osl.h 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/osl.h 2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,42 @@
 +/*
 + * OS Abstraction Layer
@@ -8501,7 +8504,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/osl.h linux.dev/arch/mips/bcm947x
 +#endif        /* _osl_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm947xx/include/pcicfg.h
 --- linux.old/arch/mips/bcm947xx/include/pcicfg.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/pcicfg.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,398 @@
 +/*
 + * pcicfg.h: PCI configuration  constants and structures.
@@ -8903,7 +8906,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/pcicfg.h linux.dev/arch/mips/bcm9
 +#endif
 diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h
 --- linux.old/arch/mips/bcm947xx/include/proto/ethernet.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/proto/ethernet.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,145 @@
 +/*******************************************************************************
 + * $Id$
@@ -9052,7 +9055,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/proto/ethernet.h linux.dev/arch/m
 +#endif /* _NET_ETHERNET_H_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/s5.h linux.dev/arch/mips/bcm947xx/include/s5.h
 --- linux.old/arch/mips/bcm947xx/include/s5.h  1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/s5.h  2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/s5.h  2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,103 @@
 +#ifndef _S5_H_
 +#define _S5_H_
@@ -9159,7 +9162,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/s5.h linux.dev/arch/mips/bcm947xx
 +#endif /*!_S5_H_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm947xx/include/sbchipc.h
 --- linux.old/arch/mips/bcm947xx/include/sbchipc.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbchipc.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,440 @@
 +/*
 + * SiliconBackplane Chipcommon core hardware definitions.
@@ -9603,7 +9606,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbchipc.h linux.dev/arch/mips/bcm
 +#endif        /* _SBCHIPC_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bcm947xx/include/sbconfig.h
 --- linux.old/arch/mips/bcm947xx/include/sbconfig.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbconfig.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,342 @@
 +/*
 + * Broadcom SiliconBackplane hardware register definitions.
@@ -9949,7 +9952,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbconfig.h linux.dev/arch/mips/bc
 +#endif        /* _SBCONFIG_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm947xx/include/sbextif.h
 --- linux.old/arch/mips/bcm947xx/include/sbextif.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbextif.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbextif.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,242 @@
 +/*
 + * Hardware-specific External Interface I/O core definitions
@@ -10195,7 +10198,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbextif.h linux.dev/arch/mips/bcm
 +#endif        /* _SBEXTIF_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm947xx/include/sbmemc.h
 --- linux.old/arch/mips/bcm947xx/include/sbmemc.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbmemc.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,148 @@
 +/*
 + * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
@@ -10347,7 +10350,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbmemc.h linux.dev/arch/mips/bcm9
 +#endif        /* _SBMEMC_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm947xx/include/sbmips.h
 --- linux.old/arch/mips/bcm947xx/include/sbmips.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbmips.h      2006-10-15 23:37:15.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbmips.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,63 @@
 +/*
 + * Broadcom SiliconBackplane MIPS definitions
@@ -10414,7 +10417,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbmips.h linux.dev/arch/mips/bcm9
 +#endif        /* _SBMIPS_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm947xx/include/sbpci.h
 --- linux.old/arch/mips/bcm947xx/include/sbpci.h       1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbpci.h       2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbpci.h       2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,122 @@
 +/*
 + * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
@@ -10540,7 +10543,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbpci.h linux.dev/arch/mips/bcm94
 +#endif        /* _SBPCI_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm947xx/include/sbsdram.h
 --- linux.old/arch/mips/bcm947xx/include/sbsdram.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbsdram.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,75 @@
 +/*
 + * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
@@ -10619,7 +10622,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbsdram.h linux.dev/arch/mips/bcm
 +#endif        /* _SBSDRAM_H */
 diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm947xx/include/sbutils.h
 --- linux.old/arch/mips/bcm947xx/include/sbutils.h     1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sbutils.h     2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sbutils.h     2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,136 @@
 +/*
 + * Misc utility routines for accessing chip-specific features
@@ -10759,7 +10762,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sbutils.h linux.dev/arch/mips/bcm
 +#endif        /* _sbutils_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm947xx/include/sflash.h
 --- linux.old/arch/mips/bcm947xx/include/sflash.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/sflash.h      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/sflash.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,36 @@
 +/*
 + * Broadcom SiliconBackplane chipcommon serial flash interface
@@ -10799,7 +10802,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/sflash.h linux.dev/arch/mips/bcm9
 +#endif /* _sflash_h_ */
 diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm947xx/include/trxhdr.h
 --- linux.old/arch/mips/bcm947xx/include/trxhdr.h      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/trxhdr.h      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,33 @@
 +/*
 + * TRX image file header format.
@@ -10836,7 +10839,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/trxhdr.h linux.dev/arch/mips/bcm9
 +typedef struct trx_header TRXHDR, *PTRXHDR;
 diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bcm947xx/include/typedefs.h
 --- linux.old/arch/mips/bcm947xx/include/typedefs.h    1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/include/typedefs.h    2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/include/typedefs.h    2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,326 @@
 +/*
 + * Copyright 2005, Broadcom Corporation      
@@ -11166,7 +11169,7 @@ diff -urN linux.old/arch/mips/bcm947xx/include/typedefs.h linux.dev/arch/mips/bc
 +#endif /* _TYPEDEFS_H_ */
 diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c
 --- linux.old/arch/mips/bcm947xx/irq.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/irq.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/irq.c 2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,64 @@
 +/*
 + *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
@@ -11234,7 +11237,7 @@ diff -urN linux.old/arch/mips/bcm947xx/irq.c linux.dev/arch/mips/bcm947xx/irq.c
 +}
 diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Makefile
 --- linux.old/arch/mips/bcm947xx/Makefile      1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/Makefile      2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/Makefile      2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,6 @@
 +#
 +# Makefile for the BCM47xx specific kernel interface routines
@@ -11244,7 +11247,7 @@ diff -urN linux.old/arch/mips/bcm947xx/Makefile linux.dev/arch/mips/bcm947xx/Mak
 +obj-y := irq.o prom.o setup.o time.o pci.o
 diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 --- linux.old/arch/mips/bcm947xx/pci.c 1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/pci.c 2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/pci.c 2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,227 @@
 +#include <linux/kernel.h>
 +#include <linux/init.h>
@@ -11475,7 +11478,7 @@ diff -urN linux.old/arch/mips/bcm947xx/pci.c linux.dev/arch/mips/bcm947xx/pci.c
 +DECLARE_PCI_FIXUP_EARLY(PCI_ANY_ID, PCI_ANY_ID, bcm47xx_fixup_bridge);
 diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.c
 --- linux.old/arch/mips/bcm947xx/prom.c        1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/prom.c        2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/prom.c        2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,59 @@
 +/*
 + *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
@@ -11538,7 +11541,7 @@ diff -urN linux.old/arch/mips/bcm947xx/prom.c linux.dev/arch/mips/bcm947xx/prom.
 +}
 diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setup.c
 --- linux.old/arch/mips/bcm947xx/setup.c       1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/setup.c       2006-10-15 23:29:14.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/setup.c       2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,158 @@
 +/*
 + *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
@@ -11700,7 +11703,7 @@ diff -urN linux.old/arch/mips/bcm947xx/setup.c linux.dev/arch/mips/bcm947xx/setu
 +EXPORT_SYMBOL(boardflags);
 diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.c
 --- linux.old/arch/mips/bcm947xx/time.c        1970-01-01 01:00:00.000000000 +0100
-+++ linux.dev/arch/mips/bcm947xx/time.c        2006-10-15 23:38:36.000000000 +0200
++++ linux.dev/arch/mips/bcm947xx/time.c        2006-11-03 21:10:13.000000000 +0100
 @@ -0,0 +1,65 @@
 +/*
 + *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
@@ -11768,8 +11771,8 @@ diff -urN linux.old/arch/mips/bcm947xx/time.c linux.dev/arch/mips/bcm947xx/time.
 +      setup_irq(7, irq);
 +}
 diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
---- linux.old/arch/mips/Kconfig        2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/Kconfig        2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/Kconfig        2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/Kconfig        2006-11-03 21:10:13.000000000 +0100
 @@ -245,6 +245,17 @@
         Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
         Olivetti M700-10 workstations.
@@ -11789,8 +11792,8 @@ diff -urN linux.old/arch/mips/Kconfig linux.dev/arch/mips/Kconfig
        bool "LASAT Networks platforms"
        select DMA_NONCOHERENT
 diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-probe.c
---- linux.old/arch/mips/kernel/cpu-probe.c     2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/cpu-probe.c     2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/cpu-probe.c     2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/cpu-probe.c     2006-11-03 21:10:13.000000000 +0100
 @@ -691,6 +691,28 @@
  }
  
@@ -11831,8 +11834,8 @@ diff -urN linux.old/arch/mips/kernel/cpu-probe.c linux.dev/arch/mips/kernel/cpu-
                cpu_probe_sandcraft(c);
                break;
 diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
---- linux.old/arch/mips/kernel/head.S  2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/head.S  2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/head.S  2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/head.S  2006-11-03 21:10:13.000000000 +0100
 @@ -133,6 +133,11 @@
        j kernel_entry
        nop
@@ -11846,8 +11849,8 @@ diff -urN linux.old/arch/mips/kernel/head.S linux.dev/arch/mips/kernel/head.S
         * Reserved space for exception handlers.
         * Necessary for machines which link their kernels at KSEG0.
 diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
---- linux.old/arch/mips/kernel/proc.c  2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/kernel/proc.c  2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/kernel/proc.c  2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/kernel/proc.c  2006-11-03 21:10:13.000000000 +0100
 @@ -84,6 +84,8 @@
        [CPU_VR4181]    = "NEC VR4181",
        [CPU_VR4181A]   = "NEC VR4181A",
@@ -11858,8 +11861,8 @@ diff -urN linux.old/arch/mips/kernel/proc.c linux.dev/arch/mips/kernel/proc.c
  };
  
 diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
---- linux.old/arch/mips/Makefile       2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/Makefile       2006-10-15 23:29:14.000000000 +0200
+--- linux.old/arch/mips/Makefile       2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/Makefile       2006-11-03 21:10:13.000000000 +0100
 @@ -565,6 +565,13 @@
  load-$(CONFIG_SIBYTE_BIGSUR)  := 0xffffffff80100000
  
@@ -11875,8 +11878,8 @@ diff -urN linux.old/arch/mips/Makefile linux.dev/arch/mips/Makefile
  #
  core-$(CONFIG_SNI_RM200_PCI)  += arch/mips/sni/
 diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
---- linux.old/arch/mips/mm/tlbex.c     2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/arch/mips/mm/tlbex.c     2006-10-15 23:31:06.000000000 +0200
+--- linux.old/arch/mips/mm/tlbex.c     2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/arch/mips/mm/tlbex.c     2006-11-03 21:15:12.000000000 +0100
 @@ -882,6 +882,8 @@
        case CPU_4KSC:
        case CPU_20KC:
@@ -11887,8 +11890,8 @@ diff -urN linux.old/arch/mips/mm/tlbex.c linux.dev/arch/mips/mm/tlbex.c
                break;
  
 diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/bootinfo.h
---- linux.old/include/asm-mips/bootinfo.h      2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/asm-mips/bootinfo.h      2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/asm-mips/bootinfo.h      2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/asm-mips/bootinfo.h      2006-11-03 21:10:13.000000000 +0100
 @@ -218,6 +218,12 @@
  #define MACH_GROUP_TITAN       22     /* PMC-Sierra Titan             */
  #define  MACH_TITAN_YOSEMITE  1       /* PMC-Sierra Yosemite          */
@@ -11903,8 +11906,8 @@ diff -urN linux.old/include/asm-mips/bootinfo.h linux.dev/include/asm-mips/booti
  
  const char *get_system_type(void);
 diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
---- linux.old/include/asm-mips/cpu.h   2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/asm-mips/cpu.h   2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/asm-mips/cpu.h   2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/asm-mips/cpu.h   2006-11-03 21:10:13.000000000 +0100
 @@ -104,6 +104,13 @@
  #define PRID_IMP_SR71000        0x0400
  
@@ -11931,8 +11934,8 @@ diff -urN linux.old/include/asm-mips/cpu.h linux.dev/include/asm-mips/cpu.h
  /*
   * ISA Level encodings
 diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
---- linux.old/include/linux/pci_ids.h  2006-10-15 23:32:44.000000000 +0200
-+++ linux.dev/include/linux/pci_ids.h  2006-10-15 23:29:14.000000000 +0200
+--- linux.old/include/linux/pci_ids.h  2006-11-03 21:16:21.000000000 +0100
++++ linux.dev/include/linux/pci_ids.h  2006-11-03 21:10:13.000000000 +0100
 @@ -1906,6 +1906,7 @@
  #define PCI_DEVICE_ID_TIGON3_5901_2   0x170e
  #define PCI_DEVICE_ID_BCM4401         0x4401
@@ -11941,3 +11944,14 @@ diff -urN linux.old/include/linux/pci_ids.h linux.dev/include/linux/pci_ids.h
  
  #define PCI_VENDOR_ID_TOPIC           0x151f
  #define PCI_DEVICE_ID_TOPIC_TP560     0x0000
+diff -urN linux.old/lib/kobject_uevent.c linux.dev/lib/kobject_uevent.c
+--- linux.old/lib/kobject_uevent.c     2006-06-18 03:49:35.000000000 +0200
++++ linux.dev/lib/kobject_uevent.c     2006-11-03 21:44:56.000000000 +0100
+@@ -29,6 +29,7 @@
+ u64 uevent_seqnum;
+ char uevent_helper[UEVENT_HELPER_PATH_LEN] = "/sbin/hotplug";
+ static DEFINE_SPINLOCK(sequence_lock);
++EXPORT_SYMBOL(uevent_helper);
+ #if defined(CONFIG_NET)
+ static struct sock *uevent_sock;
+ #endif