kernel: update bcma and ssb to wireless-testing master-2014-12-05
authorHauke Mehrtens <hauke@hauke-m.de>
Sun, 7 Dec 2014 21:53:20 +0000 (21:53 +0000)
committerHauke Mehrtens <hauke@hauke-m.de>
Sun, 7 Dec 2014 21:53:20 +0000 (21:53 +0000)
This brings ssb and bcma to wireless-testing tag master-2014-12-05

In addition it also adds the ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-
axi-in-DTS-f.patch which adds the irq number in a way it is done in the
mainline kernel.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 43544

22 files changed:
target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.14/047-ARM-BCM5301X-Add-buttons-for-Netgear-R6250.patch
target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch [deleted file]
target/linux/bcm53xx/patches-3.14/130-ARM-BCM5301X-register-bcma-bus.patch
target/linux/bcm53xx/patches-3.14/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
target/linux/bcm53xx/patches-3.14/304-ARM-BCM5301X-Switch-DT-files-to-gpio-keys-polled.patch
target/linux/bcm53xx/patches-3.14/305-ARM-BCM5301X-Enable-ChipCommon-UART-serial-console.patch
target/linux/bcm53xx/patches-3.14/320-ARM-BCM5301X-Add-DT-for-Buffalo-WZR-900DHP.patch
target/linux/bcm53xx/patches-3.14/420-mtd-bcm5301x_nand.patch
target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch [new file with mode: 0644]
target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch [deleted file]
target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch [deleted file]
target/linux/bcm53xx/patches-3.18/130-ARM-BCM5301X-register-bcma-bus.patch
target/linux/bcm53xx/patches-3.18/170-pcie2-bcma-add-new-PCIe2-driver-for-bcma.patch
target/linux/bcm53xx/patches-3.18/420-mtd-bcm5301x_nand.patch
target/linux/generic/patches-3.10/020-ssb_update.patch
target/linux/generic/patches-3.10/025-bcma_backport.patch
target/linux/generic/patches-3.14/020-ssb_update.patch
target/linux/generic/patches-3.14/025-bcma_backport.patch
target/linux/generic/patches-3.14/490-ubi-auto-attach-mtd-device-named-ubi-or-data-on-boot.patch
target/linux/generic/patches-3.18/020-ssb_update.patch [new file with mode: 0644]
target/linux/generic/patches-3.18/025-bcma_backport.patch

diff --git a/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.14/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
new file mode 100644 (file)
index 0000000..35cd0ca
--- /dev/null
@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+               #address-cells = <1>;
+               #size-cells = <1>;
++              #interrupt-cells = <1>;
++              interrupt-map-mask = <0x000fffff 0xffff>;
++              interrupt-map = 
++                      /* ChipCommon */
++                      <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* USB 2.0 Controller */
++                      <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* USB 3.0 Controller */
++                      <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 0 */
++                      <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 1 */
++                      <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 2 */
++                      <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 3 */
++                      <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* NAND Controller */
++                      <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+               chipcommon: chipcommon@0 {
+                       reg = <0x00000000 0x1000>;
index 82aa11c5c4843bb2a0941034a806cca12f4c7bc1..2b9b900064afee1a6c24454452974207854b665e 100644 (file)
@@ -13,8 +13,6 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
  arch/arm/boot/dts/bcm5301x.dtsi             |  1 +
  2 files changed, 26 insertions(+)
 
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 58d999d..4ed7de1 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 @@ -66,4 +66,29 @@
@@ -47,8 +45,6 @@ index 58d999d..4ed7de1 100644
 +              };
 +      };
  };
-diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
-index b7c4e9e..78aec62 100644
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
 @@ -9,6 +9,7 @@
@@ -59,6 +55,3 @@ index b7c4e9e..78aec62 100644
  #include <dt-bindings/interrupt-controller/irq.h>
  #include <dt-bindings/interrupt-controller/arm-gic.h>
  #include "skeleton.dtsi"
--- 
-1.8.4.5
-
diff --git a/target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch b/target/linux/bcm53xx/patches-3.14/121-bcma-get-irqs-from-dt.patch
deleted file mode 100644 (file)
index e38b5bc..0000000
+++ /dev/null
@@ -1,38 +0,0 @@
-From 6611afa6c49434780096cdf2c1028f0ac277f9bc Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH v3 2/2] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/main.c | 49 ++++++++++++++++++++++++++++++++++++++++++++++++-
- 1 file changed, 48 insertions(+), 1 deletion(-)
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
- #include <linux/platform_device.h>
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
-+#include <linux/of_irq.h>
- #include <linux/of_address.h>
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
-@@ -159,8 +160,10 @@ static void bcma_of_fill_device(struct p
-       struct device_node *node;
-       node = bcma_of_find_child_device(parent, core);
--      if (node)
--              core->dev.of_node = node;
-+      if (!node)
-+              return;
-+      core->dev.of_node = node;
-+      core->irq = irq_of_parse_and_map(node, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
index 024123f9d3d7819d1ee6b9bc25ddaf94762cbdcf..4044b44ff2c6dcd22ee5ac89216e4889c9cf6c7a 100644 (file)
@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
 
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -94,18 +94,102 @@
+@@ -95,12 +95,23 @@
                };
        };
  
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
                #size-cells = <1>;
 +              sprom = <&sprom0>;
  
-               chipcommon: chipcommon@0 {
-                       reg = <0x00000000 0x1000>;
-+                      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+               #interrupt-cells = <1>;
+               interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+                       /* ChipCommon */
+                       <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
  
-                       gpio-controller;
-                       #gpio-cells = <2>;
-               };
-+
-+              pcie@12000 {
-+                      reg = <0x00012000 0x1000>;
-+                      interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              pcie@13000 {
-+                      reg = <0x00013000 0x1000>;
-+                      interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              pcie@14000 {
-+                      reg = <0x00014000 0x1000>;
-+                      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              usb2@21000 {
-+                      reg = <0x00021000 0x1000>;
-+                      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 0 */
++                      <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              usb3@23000 {
-+                      reg = <0x00023000 0x1000>;
-+                      interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 1 */
++                      <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              ethernet@24000 {
-+                      reg = <0x00024000 0x1000>;
-+                      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 2 */
++                      <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              ethernet@25000 {
-+                      reg = <0x00025000 0x1000>;
-+                      interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              ethernet@26000 {
-+                      reg = <0x00026000 0x1000>;
-+                      interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              ethernet@27000 {
-+                      reg = <0x00027000 0x1000>;
-+                      interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              nand@28000 {
-+                      reg = <0x00028000 0x1000>;
-+                      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-       };
- };
+                       /* USB 2.0 Controller */
+                       <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
index 84e6c06f5f580c96c4d873a0ace67bfc28cf9394..1b6149f20fa0dabc3b22ee9a26ac4a9bc1ec085a 100644 (file)
@@ -17,7 +17,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 
 --- a/arch/arm/mach-bcm/Kconfig
 +++ b/arch/arm/mach-bcm/Kconfig
-@@ -46,6 +46,7 @@ config ARCH_BCM_5301X
+@@ -45,6 +45,7 @@ config ARCH_BCM_5301X
        select ARM_GLOBAL_TIMER
        select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
        select MIGHT_HAVE_PCI
@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +      struct pci_sys_data *sys = pdev->sysdata;
 +      struct bcma_device *bdev = sys->private_data;
 +
-+      return bdev->irq;
++      return bcma_core_irq(bdev, 5);
 +}
 +
 +static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
index ca7582d1681e25b1c76299f74edd1213bec61097..b107fe378c1937545648e14954c52e76a8a4f8d7 100644 (file)
@@ -17,8 +17,6 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com>
  arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 2 +-
  5 files changed, 5 insertions(+), 5 deletions(-)
 
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 5fc0fae..583720e 100644
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 @@ -24,7 +24,7 @@
@@ -30,8 +28,6 @@ index 5fc0fae..583720e 100644
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
-index 05e80b1..70a1093 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
 @@ -68,7 +68,7 @@
@@ -43,8 +39,6 @@ index 05e80b1..70a1093 100644
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index 12fc2a0..ac299a2 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 @@ -58,7 +58,7 @@
@@ -56,8 +50,6 @@ index 12fc2a0..ac299a2 100644
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index fb76378..934b244 100644
 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 @@ -58,7 +58,7 @@
@@ -69,8 +61,6 @@ index fb76378..934b244 100644
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <200>;
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index bbb414f..d2aefef 100644
 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 @@ -24,7 +24,7 @@
@@ -82,6 +72,3 @@ index bbb414f..d2aefef 100644
                #address-cells = <1>;
                #size-cells = <0>;
                poll-interval = <200>;
--- 
-1.8.4.5
-
index 7d90697c6c9efbfb35bd14b4f260a6c04983d126..c81e20ff4aa02ecfdd1b4f8fb6a5eefecf5939ae 100644 (file)
@@ -14,8 +14,6 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com>
  arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts | 10 ++++++++++
  4 files changed, 40 insertions(+)
 
-diff --git a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
-index 583720e..d472c36 100644
 --- a/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 +++ b/arch/arm/boot/dts/bcm4708-buffalo-wzr-1750dhp.dts
 @@ -23,6 +23,16 @@
@@ -35,8 +33,6 @@ index 583720e..d472c36 100644
        gpio-keys {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
-diff --git a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
-index ac299a2..257d6da 100644
 --- a/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 +++ b/arch/arm/boot/dts/bcm4708-netgear-r6300-v2.dts
 @@ -23,6 +23,16 @@
@@ -56,8 +52,6 @@ index ac299a2..257d6da 100644
        leds {
                compatible = "gpio-leds";
  
-diff --git a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
-index 934b244..cad0e85 100644
 --- a/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 +++ b/arch/arm/boot/dts/bcm47081-asus-rt-n18u.dts
 @@ -23,6 +23,16 @@
@@ -77,8 +71,6 @@ index 934b244..cad0e85 100644
        leds {
                compatible = "gpio-leds";
  
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
-index d2aefef..f3a0326 100644
 --- a/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-600dhp2.dts
 @@ -23,6 +23,16 @@
@@ -98,6 +90,3 @@ index d2aefef..f3a0326 100644
        gpio-keys {
                compatible = "gpio-keys-polled";
                #address-cells = <1>;
--- 
-1.8.4.5
-
index 96c728dfb0d603ca7a6f1187ee6d7e7a57879bd0..197869745d1c0c67249904d4bfd3e24e542f49bb 100644 (file)
@@ -13,8 +13,6 @@ Signed-off-by: RafaÅ‚ MiÅ‚ecki <zajec5@gmail.com>
  2 files changed, 37 insertions(+), 1 deletion(-)
  create mode 100644 arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
 
-diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
-index 64c8f3f..41e8455 100644
 --- a/arch/arm/boot/dts/Makefile
 +++ b/arch/arm/boot/dts/Makefile
 @@ -55,7 +55,8 @@ dtb-$(CONFIG_ARCH_BCM_5301X) += \
@@ -27,9 +25,6 @@ index 64c8f3f..41e8455 100644
  dtb-$(CONFIG_ARCH_BERLIN) += \
        berlin2-sony-nsz-gs7.dtb        \
        berlin2cd-google-chromecast.dtb
-diff --git a/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
-new file mode 100644
-index 0000000..5e4b3a9
 --- /dev/null
 +++ b/arch/arm/boot/dts/bcm47081-buffalo-wzr-900dhp.dts
 @@ -0,0 +1,35 @@
@@ -68,6 +63,3 @@ index 0000000..5e4b3a9
 +              };
 +      };
 +};
--- 
-1.8.4.5
-
index 86c288d41e83f58c7dfc9c41efd6294044615e70..0e038708831fb208c3dd9f10428d960c43c91ae6 100644 (file)
@@ -22,7 +22,7 @@
  nand-objs := nand_base.o nand_bbt.o
 --- /dev/null
 +++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
 +/*
 + * Nortstar NAND controller driver
 + * for Linux NAND library and MTD interface
 +static int bcmnand_probe(struct bcma_device *core)
 +{
 +      struct device *dev = &core->dev;
-+      struct device_node *np = dev->of_node;
 +      struct bcmnand_ctrl *ctrl;
 +      int res, i, irq;
 +
-+      if (!np) {
-+              pr_err("%s: no device tree node found\n", DRV_NAME);
-+              return -ENOENT;
-+      }
-+
 +      ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 +      if (!ctrl)
 +              return -ENOMEM;
 +      ctrl->core = core;
 +
 +      /* Acquire all interrupt lines */
-+      for (i = 0; i < of_irq_count(np); i++) {
-+              irq = irq_of_parse_and_map(np, i);
++      for (i = 0; i < NANDC_IRQ_NUM; i++) {
++              irq = bcma_core_irq(core, i);
++              if (!irq) {
++                      pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++                             DRV_NAME, irq, i);
++                      return res;
++              }
 +              res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
 +              if (res < 0) {
 +                      pr_err("%s: problem requesting irq: %i (idx: %i)\n",
diff --git a/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch b/target/linux/bcm53xx/patches-3.18/046-ARM-BCM5301X-Add-IRQs-to-Broadcom-s-bus-axi-in-DTS-f.patch
new file mode 100644 (file)
index 0000000..35cd0ca
--- /dev/null
@@ -0,0 +1,58 @@
+From dec378827c4aaab6c46ecdd5fc2c3b3155d68743 Mon Sep 17 00:00:00 2001
+From: Hauke Mehrtens <hauke@hauke-m.de>
+Date: Wed, 24 Sep 2014 23:50:07 +0200
+Subject: [PATCH] ARM: BCM5301X: Add IRQs to Broadcom's bus-axi in DTS file
+
+IRQ support for Broadcom's bus-axi driver bcma was merged into John
+Linville's wireless tree and will show up in 3.19. This patch makes use
+of this feature in the DTS file for the the BCM5301X SoCs. I left the
+PCIe controller out, because this still needs some discussion.
+
+Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
+---
+ arch/arm/boot/dts/bcm5301x.dtsi | 34 ++++++++++++++++++++++++++++++++++
+ 1 file changed, 34 insertions(+)
+
+--- a/arch/arm/boot/dts/bcm5301x.dtsi
++++ b/arch/arm/boot/dts/bcm5301x.dtsi
+@@ -101,6 +101,40 @@
+               #address-cells = <1>;
+               #size-cells = <1>;
++              #interrupt-cells = <1>;
++              interrupt-map-mask = <0x000fffff 0xffff>;
++              interrupt-map = 
++                      /* ChipCommon */
++                      <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* USB 2.0 Controller */
++                      <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* USB 3.0 Controller */
++                      <0x00023000 0 &gic GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 0 */
++                      <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 1 */
++                      <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 2 */
++                      <0x00026000 0 &gic GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 3 */
++                      <0x00027000 0 &gic GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* NAND Controller */
++                      <0x00028000 0 &gic GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 1 &gic GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 2 &gic GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 3 &gic GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 4 &gic GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 5 &gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 6 &gic GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00028000 7 &gic GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
++
+               chipcommon: chipcommon@0 {
+                       reg = <0x00000000 0x1000>;
diff --git a/target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch b/target/linux/bcm53xx/patches-3.18/060-bcma-make-it-possible-to-specify-a-IRQ-num-in-bcma_c.patch
deleted file mode 100644 (file)
index d030b86..0000000
+++ /dev/null
@@ -1,162 +0,0 @@
-From f3bbc921543ad8098617a5a6a8054fab11878a25 Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Wed, 1 Oct 2014 00:30:37 +0200
-Subject: [PATCH 1/3] bcma: make it possible to specify a IRQ num in
- bcma_core_irq()
-
-This moves bcma_core_irq() to main.c and add a extra parameter with a
-number so that we can return different irq number for devices with more
-than one.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- drivers/bcma/driver_chipcommon.c      |  2 +-
- drivers/bcma/driver_gpio.c            |  4 ++--
- drivers/bcma/driver_mips.c            | 11 ++---------
- drivers/bcma/driver_pci_host.c        |  4 ++--
- drivers/bcma/main.c                   | 22 ++++++++++++++++++++++
- include/linux/bcma/bcma.h             |  2 ++
- include/linux/bcma/bcma_driver_mips.h |  4 ++--
- 7 files changed, 33 insertions(+), 16 deletions(-)
-
---- a/drivers/bcma/driver_chipcommon.c
-+++ b/drivers/bcma/driver_chipcommon.c
-@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
-               return;
-       }
--      irq = bcma_core_irq(cc->core);
-+      irq = bcma_core_irq(cc->core, 0);
-       /* Determine the registers of the UARTs */
-       cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
---- a/drivers/bcma/driver_gpio.c
-+++ b/drivers/bcma/driver_gpio.c
-@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
-                                        handle_simple_irq);
-       }
--      hwirq = bcma_core_irq(cc->core);
-+      hwirq = bcma_core_irq(cc->core, 0);
-       err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
-                         cc);
-       if (err)
-@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
-               return;
-       bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
--      free_irq(bcma_core_irq(cc->core), cc);
-+      free_irq(bcma_core_irq(cc->core, 0), cc);
-       for (gpio = 0; gpio < chip->ngpio; gpio++) {
-               int irq = irq_find_mapping(cc->irq_domain, gpio);
---- a/drivers/bcma/driver_mips.c
-+++ b/drivers/bcma/driver_mips.c
-@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
-  * If disabled, 5 is returned.
-  * If not supported, 6 is returned.
-  */
--static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
-+unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
-       struct bcma_device *mdev = dev->bus->drv_mips.core;
-       u32 irqflag;
-@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
-       return 5;
- }
--unsigned int bcma_core_irq(struct bcma_device *dev)
--{
--      unsigned int mips_irq = bcma_core_mips_irq(dev);
--      return mips_irq <= 4 ? mips_irq + 2 : 0;
--}
--EXPORT_SYMBOL(bcma_core_irq);
--
- static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
- {
-       unsigned int oldirq = bcma_core_mips_irq(dev);
-@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
-               break;
-       default:
-               list_for_each_entry(core, &bus->cores, list) {
--                      core->irq = bcma_core_irq(core);
-+                      core->irq = bcma_core_irq(core, 0);
-               }
-               bcma_err(bus,
-                        "Unknown device (0x%x) found, can not configure IRQs\n",
---- a/drivers/bcma/driver_pci_host.c
-+++ b/drivers/bcma/driver_pci_host.c
-@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
-       pr_info("PCI: Fixing up device %s\n", pci_name(dev));
-       /* Fix up interrupt lines */
--      dev->irq = bcma_core_irq(pc_host->pdev->core);
-+      dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
-       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-       readrq = pcie_get_readrq(dev);
-@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
-       pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
-                              pci_ops);
--      return bcma_core_irq(pc_host->pdev->core);
-+      return bcma_core_irq(pc_host->pdev->core, 0);
- }
- EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -169,6 +169,28 @@ static void bcma_of_fill_device(struct p
- }
- #endif /* CONFIG_OF */
-+unsigned int bcma_core_irq(struct bcma_device *core, int num)
-+{
-+      struct bcma_bus *bus = core->bus;
-+      unsigned int mips_irq;
-+
-+      switch (bus->hosttype) {
-+      case BCMA_HOSTTYPE_PCI:
-+              return bus->host_pci->irq;
-+      case BCMA_HOSTTYPE_SOC:
-+              if (bus->drv_mips.core && num == 0) {
-+                      mips_irq = bcma_core_mips_irq(core);
-+                      return mips_irq <= 4 ? mips_irq + 2 : 0;
-+              }
-+              break;
-+      case BCMA_HOSTTYPE_SDIO:
-+              return 0;
-+      }
-+
-+      return 0;
-+}
-+EXPORT_SYMBOL(bcma_core_irq);
-+
- void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
- {
-       core->dev.release = bcma_release_core_dev;
---- a/include/linux/bcma/bcma.h
-+++ b/include/linux/bcma/bcma.h
-@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
- #define  BCMA_DMA_TRANSLATION_DMA64_CMT       0x80000000 /* Client Mode Translation for 64-bit DMA */
- extern u32 bcma_core_dma_translation(struct bcma_device *core);
-+extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
-+
- #endif /* LINUX_BCMA_H_ */
---- a/include/linux/bcma/bcma_driver_mips.h
-+++ b/include/linux/bcma/bcma_driver_mips.h
-@@ -43,12 +43,12 @@ struct bcma_drv_mips {
- extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
- extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
--extern unsigned int bcma_core_irq(struct bcma_device *core);
-+extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
- #else
- static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
- static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
--static inline unsigned int bcma_core_irq(struct bcma_device *core)
-+static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
- {
-       return 0;
- }
diff --git a/target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch b/target/linux/bcm53xx/patches-3.18/061-bcma-get-IRQ-numbers-from-dt.patch
deleted file mode 100644 (file)
index 886f6fb..0000000
+++ /dev/null
@@ -1,141 +0,0 @@
-From 4eb6a1fd46965ed6c3fb9327276eb53a3021eaaa Mon Sep 17 00:00:00 2001
-From: Hauke Mehrtens <hauke@hauke-m.de>
-Date: Thu, 9 Jan 2014 19:40:14 +0100
-Subject: [PATCH 3/3] bcma: get IRQ numbers from dt
-
-It is not possible to auto detect the irq numbers used by the cores on
-an arm SoC. If bcma was registered with device tree it will search for
-some device tree nodes with the irq number and add it to the core
-configuration.
-
-Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
----
- Documentation/devicetree/bindings/bus/bcma.txt | 21 +++++++++++
- drivers/bcma/main.c                            | 52 +++++++++++++++++++++++++-
- 2 files changed, 72 insertions(+), 1 deletion(-)
-
---- a/Documentation/devicetree/bindings/bus/bcma.txt
-+++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -8,6 +8,11 @@ Required properties:
- The cores on the AXI bus are automatically detected by bcma with the
- memory ranges they are using and they get registered afterwards.
-+Automatic detection of the IRQ number is not working on
-+BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
-+them manually through device tree. Use an interrupt-map to specify the
-+IRQ used by the devices on the bus. The first address is just an index,
-+because we do not have any special register.
- The top-level axi bus may contain children representing attached cores
- (devices). This is needed since some hardware details can't be auto
-@@ -22,6 +27,22 @@ Example:
-               ranges = <0x00000000 0x18000000 0x00100000>;
-               #address-cells = <1>;
-               #size-cells = <1>;
-+              #interrupt-cells = <1>;
-+              interrupt-map-mask = <0x000fffff 0xffff>;
-+              interrupt-map =
-+                      /* Ethernet Controller 0 */
-+                      <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
-+
-+                      /* Ethernet Controller 1 */
-+                      <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+
-+                      /* PCIe Controller 0 */
-+                      <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+                      <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+                      <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+                      <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+                      <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
-+                      <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
-               chipcommon {
-                       reg = <0x00000000 0x1000>;
---- a/drivers/bcma/main.c
-+++ b/drivers/bcma/main.c
-@@ -11,6 +11,7 @@
- #include <linux/bcma/bcma.h>
- #include <linux/slab.h>
- #include <linux/of_address.h>
-+#include <linux/of_irq.h>
- MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
- MODULE_LICENSE("GPL");
-@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
-       return NULL;
- }
-+static int bcma_of_irq_parse(struct platform_device *parent,
-+                           struct bcma_device *core,
-+                           struct of_phandle_args *out_irq, int num)
-+{
-+      __be32 laddr[1];
-+      int rc;
-+
-+      if (core->dev.of_node) {
-+              rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
-+              if (!rc)
-+                      return rc;
-+      }
-+
-+      out_irq->np = parent->dev.of_node;
-+      out_irq->args_count = 1;
-+      out_irq->args[0] = num;
-+
-+      laddr[0] = cpu_to_be32(core->addr);
-+      return of_irq_parse_raw(laddr, out_irq);
-+}
-+
-+static unsigned int bcma_of_get_irq(struct platform_device *parent,
-+                                  struct bcma_device *core, int num)
-+{
-+      struct of_phandle_args out_irq;
-+      int ret;
-+
-+      if (!parent || !parent->dev.of_node)
-+              return 0;
-+
-+      ret = bcma_of_irq_parse(parent, core, &out_irq, num);
-+      if (ret) {
-+              bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
-+                         ret);
-+              return 0;
-+      }
-+
-+      return irq_create_of_mapping(&out_irq);
-+}
-+
- static void bcma_of_fill_device(struct platform_device *parent,
-                               struct bcma_device *core)
- {
-@@ -161,12 +202,19 @@ static void bcma_of_fill_device(struct p
-       node = bcma_of_find_child_device(parent, core);
-       if (node)
-               core->dev.of_node = node;
-+
-+      core->irq = bcma_of_get_irq(parent, core, 0);
- }
- #else
- static void bcma_of_fill_device(struct platform_device *parent,
-                               struct bcma_device *core)
- {
- }
-+static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
-+                                         struct bcma_device *core, int num)
-+{
-+      return 0;
-+}
- #endif /* CONFIG_OF */
- unsigned int bcma_core_irq(struct bcma_device *core, int num)
-@@ -182,7 +230,9 @@ unsigned int bcma_core_irq(struct bcma_d
-                       mips_irq = bcma_core_mips_irq(core);
-                       return mips_irq <= 4 ? mips_irq + 2 : 0;
-               }
--              break;
-+              if (bus->host_pdev)
-+                      return bcma_of_get_irq(bus->host_pdev, core, num);
-+              return 0;
-       case BCMA_HOSTTYPE_SDIO:
-               return 0;
-       }
index c6dbf7bf7e7d8fa712bd4f633e181ae854d9ea96..4044b44ff2c6dcd22ee5ac89216e4889c9cf6c7a 100644 (file)
@@ -9,7 +9,7 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
 
 --- a/arch/arm/boot/dts/bcm5301x.dtsi
 +++ b/arch/arm/boot/dts/bcm5301x.dtsi
-@@ -95,18 +95,102 @@
+@@ -95,12 +95,23 @@
                };
        };
  
@@ -31,84 +31,36 @@ Subject: [PATCH 07/17] ARM: BCM5301X: register bcma bus
                #size-cells = <1>;
 +              sprom = <&sprom0>;
  
-               chipcommon: chipcommon@0 {
-                       reg = <0x00000000 0x1000>;
-+                      interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
+               #interrupt-cells = <1>;
+               interrupt-map-mask = <0x000fffff 0xffff>;
+@@ -108,6 +119,30 @@
+                       /* ChipCommon */
+                       <0x00000000 0 &gic GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>,
  
-                       gpio-controller;
-                       #gpio-cells = <2>;
-               };
-+
-+              pcie@12000 {
-+                      reg = <0x00012000 0x1000>;
-+                      interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              pcie@13000 {
-+                      reg = <0x00013000 0x1000>;
-+                      interrupts = <GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              pcie@14000 {
-+                      reg = <0x00014000 0x1000>;
-+                      interrupts = <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 139 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              usb2@21000 {
-+                      reg = <0x00021000 0x1000>;
-+                      interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 0 */
++                      <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              usb3@23000 {
-+                      reg = <0x00023000 0x1000>;
-+                      interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 1 */
++                      <0x00013000 0 &gic GIC_SPI 132 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 1 &gic GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 2 &gic GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 3 &gic GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 4 &gic GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00013000 5 &gic GIC_SPI 137 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              ethernet@24000 {
-+                      reg = <0x00024000 0x1000>;
-+                      interrupts = <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>;
-+              };
++                      /* PCIe Controller 2 */
++                      <0x00014000 0 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 1 &gic GIC_SPI 138 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 2 &gic GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 3 &gic GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 4 &gic GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00014000 5 &gic GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
 +
-+              ethernet@25000 {
-+                      reg = <0x00025000 0x1000>;
-+                      interrupts = <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              ethernet@26000 {
-+                      reg = <0x00026000 0x1000>;
-+                      interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              ethernet@27000 {
-+                      reg = <0x00027000 0x1000>;
-+                      interrupts = <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-+
-+              nand@28000 {
-+                      reg = <0x00028000 0x1000>;
-+                      interrupts = <GIC_SPI 64 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
-+                                   <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>;
-+              };
-       };
- };
+                       /* USB 2.0 Controller */
+                       <0x00021000 0 &gic GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>,
index 9254089c952289573a15da6c4c2d0b7f9603ad2f..3efdeea218904dacf0c9894f19f6bc4af206efa9 100644 (file)
@@ -120,7 +120,7 @@ Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
 +      struct pci_sys_data *sys = pdev->sysdata;
 +      struct bcma_device *bdev = sys->private_data;
 +
-+      return bdev->irq;
++      return bcma_core_irq(bdev, 5);
 +}
 +
 +static u32 bcma_pcie2_cfg_base(struct bcma_device *bdev, int busno,
index 0b549f842c418794c22f06b69820652868a8b620..d51ce049629a1010f18c33c484150ddca53a2036 100644 (file)
@@ -22,7 +22,7 @@
  nand-objs := nand_base.o nand_bbt.o nand_timings.o
 --- /dev/null
 +++ b/drivers/mtd/nand/bcm_nand.c
-@@ -0,0 +1,1591 @@
+@@ -0,0 +1,1590 @@
 +/*
 + * Nortstar NAND controller driver
 + * for Linux NAND library and MTD interface
 +static int bcmnand_probe(struct bcma_device *core)
 +{
 +      struct device *dev = &core->dev;
-+      struct device_node *np = dev->of_node;
 +      struct bcmnand_ctrl *ctrl;
 +      int res, i, irq;
 +
-+      if (!np) {
-+              pr_err("%s: no device tree node found\n", DRV_NAME);
-+              return -ENOENT;
-+      }
-+
 +      ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
 +      if (!ctrl)
 +              return -ENOMEM;
 +      ctrl->core = core;
 +
 +      /* Acquire all interrupt lines */
-+      for (i = 0; i < of_irq_count(np); i++) {
-+              irq = irq_of_parse_and_map(np, i);
++      for (i = 0; i < NANDC_IRQ_NUM; i++) {
++              irq = bcma_core_irq(core, i);
++              if (!irq) {
++                      pr_err("%s: IRQ no available irq: %i (idx: %i)\n",
++                             DRV_NAME, irq, i);
++                      return res;
++              }
 +              res = devm_request_irq(dev, irq, bcmnand_isr, 0, DRV_NAME, ctrl);
 +              if (res < 0) {
 +                      pr_err("%s: problem requesting irq: %i (idx: %i)\n",
index 6e93b9a91d4888e4903087108dfac3e044e26823..a85ab109672014653f221be118b4cb0290d286df 100644 (file)
  static int ssb_gpio_chipco_get_value(struct gpio_chip *chip, unsigned gpio)
  {
        struct ssb_bus *bus = ssb_gpio_get_bus(chip);
-@@ -74,19 +98,129 @@ static void ssb_gpio_chipco_free(struct 
+@@ -74,19 +98,129 @@ static void ssb_gpio_chipco_free(struct
        ssb_chipco_gpio_pullup(&bus->chipco, 1 << gpio, 0);
  }
  
  int ssb_gpio_init(struct ssb_bus *bus)
  {
        if (ssb_chipco_available(&bus->chipco))
+@@ -201,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+       if (ssb_chipco_available(&bus->chipco) ||
+           ssb_extif_available(&bus->extif)) {
+-              return gpiochip_remove(&bus->gpio);
++              gpiochip_remove(&bus->gpio);
++              return 0;
+       } else {
+               SSB_WARN_ON(1);
+       }
 --- a/drivers/ssb/main.c
 +++ b/drivers/ssb/main.c
 @@ -553,6 +553,14 @@ static int ssb_devices_register(struct s
        for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
 --- a/drivers/ssb/pcihost_wrapper.c
 +++ b/drivers/ssb/pcihost_wrapper.c
-@@ -38,7 +38,7 @@ static int ssb_pcihost_resume(struct pci
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
+       struct ssb_bus *ssb = pci_get_drvdata(dev);
+       int err;
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+               return err;
+       pci_save_state(dev);
+       pci_disable_device(dev);
+-      pci_set_power_state(dev, pci_choose_state(dev, state));
++
++      /* if there is a wakeup enabled child device on ssb bus,
++         enable pci wakeup posibility. */
++      device_set_wakeup_enable(d, d->power.wakeup_path);
++
++      pci_prepare_to_sleep(dev);
+       return 0;
+ }
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
        struct ssb_bus *ssb = pci_get_drvdata(dev);
        int err;
  
 -      pci_set_power_state(dev, 0);
-+      pci_set_power_state(dev, PCI_D0);
++      pci_back_from_sleep(dev);
        err = pci_enable_device(dev);
        if (err)
                return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+       return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend  NULL
+-# define ssb_pcihost_resume   NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++      SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+                            const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+       driver->probe = ssb_pcihost_probe;
+       driver->remove = ssb_pcihost_remove;
+-      driver->suspend = ssb_pcihost_suspend;
+-      driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++      driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+       return pci_register_driver(driver);
+ }
 --- a/drivers/ssb/sprom.c
 +++ b/drivers/ssb/sprom.c
 @@ -54,7 +54,7 @@ static int hex2sprom(u16 *sprom, const c
index f752b0b0a1a0e60559ab016d796c1d2dbc052dbe..3ae8fd54a2ab4e7e1bf0e2129f13b4694ed75b3e 100644 (file)
  bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)   += driver_gmac_cmn.o
 --- a/drivers/bcma/bcma_private.h
 +++ b/drivers/bcma/bcma_private.h
-@@ -22,6 +22,8 @@
+@@ -22,6 +22,9 @@
  struct bcma_bus;
  
  /* main.c */
 +bool bcma_wait_value(struct bcma_device *core, u16 reg, u32 mask, u32 value,
 +                   int timeout);
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core);
  int bcma_bus_register(struct bcma_bus *bus);
  void bcma_bus_unregister(struct bcma_bus *bus);
  int __init bcma_bus_early_register(struct bcma_bus *bus,
-@@ -31,8 +33,6 @@ int __init bcma_bus_early_register(struc
+@@ -31,8 +34,6 @@ int __init bcma_bus_early_register(struc
  int bcma_bus_suspend(struct bcma_bus *bus);
  int bcma_bus_resume(struct bcma_bus *bus);
  #endif
@@ -66,7 +67,7 @@
  
  /* scan.c */
  int bcma_bus_scan(struct bcma_bus *bus);
-@@ -50,6 +50,10 @@ void bcma_chipco_serial_init(struct bcma
+@@ -50,6 +51,10 @@ void bcma_chipco_serial_init(struct bcma
  extern struct platform_device bcma_pflash_dev;
  #endif /* CONFIG_BCMA_DRIVER_MIPS */
  
@@ -77,7 +78,7 @@
  /* driver_chipcommon_pmu.c */
  u32 bcma_pmu_get_alp_clock(struct bcma_drv_cc *cc);
  u32 bcma_pmu_get_cpu_clock(struct bcma_drv_cc *cc);
-@@ -84,6 +88,20 @@ extern int __init bcma_host_pci_init(voi
+@@ -84,6 +89,20 @@ extern int __init bcma_host_pci_init(voi
  extern void __exit bcma_host_pci_exit(void);
  #endif /* CONFIG_BCMA_HOST_PCI */
  
  }
  EXPORT_SYMBOL_GPL(bcma_core_disable);
  
-@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device 
+@@ -43,6 +64,7 @@ int bcma_core_enable(struct bcma_device
        bcma_aread32(core, BCMA_IOCTL);
  
        bcma_awrite32(core, BCMA_RESET_CTL, 0);
        }
  
        if (cc->capabilities & BCMA_CC_CAP_PMU)
+@@ -332,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+               return;
+       }
+-      irq = bcma_core_irq(cc->core);
++      irq = bcma_core_irq(cc->core, 0);
+       /* Determine the registers of the UARTs */
+       cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
 @@ -56,6 +56,109 @@ void bcma_chipco_regctl_maskset(struct b
  };
  
  static void bcma_sflash_cmd(struct bcma_drv_cc *cc, u32 opcode)
-@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc 
+@@ -89,7 +89,7 @@ int bcma_sflash_init(struct bcma_drv_cc
  {
        struct bcma_bus *bus = cc->core->bus;
        struct bcma_sflash *sflash = &cc->sflash;
 +                                       handle_simple_irq);
 +      }
 +
-+      hwirq = bcma_core_irq(cc->core);
++      hwirq = bcma_core_irq(cc->core, 0);
 +      err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
 +                        cc);
 +      if (err)
 +              return;
 +
 +      bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
-+      free_irq(bcma_core_irq(cc->core), cc);
++      free_irq(bcma_core_irq(cc->core, 0), cc);
 +      for (gpio = 0; gpio < chip->ngpio; gpio++) {
 +              int irq = irq_find_mapping(cc->irq_domain, gpio);
 +
        /* There is just one SoC in one device and its GPIO addresses should be
         * deterministic to address them more easily. The other buses could get
         * a random base number. */
-@@ -105,10 +239,21 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+@@ -105,10 +239,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
        else
                chip->base              = -1;
  
  
  int bcma_gpio_unregister(struct bcma_drv_cc *cc)
  {
+-      return gpiochip_remove(&cc->gpio);
 +      bcma_gpio_irq_domain_exit(cc);
-       return gpiochip_remove(&cc->gpio);
++      gpiochip_remove(&cc->gpio);
++      return 0;
  }
 --- a/drivers/bcma/driver_pci.c
 +++ b/drivers/bcma/driver_pci.c
                                u8 address, u16 data)
  {
        int max_retries = 10;
-@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct 
+@@ -137,6 +137,13 @@ static void bcma_pcie_mdio_write(struct
        pcicore_write32(pc, BCMA_CORE_PCI_MDIO_CONTROL, 0);
  }
  
  
        if (dev->bus->ops->read != bcma_core_pci_hostmode_read_config) {
                /* This is not a device on the PCI-core bridge. */
-@@ -595,6 +596,11 @@ int bcma_core_pci_plat_dev_init(struct p
-       dev->irq = bcma_core_irq(pc_host->pdev->core);
+@@ -592,9 +593,14 @@ int bcma_core_pci_plat_dev_init(struct p
+       pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+       /* Fix up interrupt lines */
+-      dev->irq = bcma_core_irq(pc_host->pdev->core);
++      dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
        pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
  
 +      readrq = pcie_get_readrq(dev);
        return 0;
  }
  EXPORT_SYMBOL(bcma_core_pci_plat_dev_init);
+@@ -611,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+       pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+                              pci_ops);
+-      return bcma_core_irq(pc_host->pdev->core);
++      return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- /dev/null
 +++ b/drivers/bcma/driver_pcie2.c
 @@ -0,0 +1,175 @@
        /* Register */
        err = bcma_bus_register(bus);
        if (err)
-@@ -235,7 +241,6 @@ static void bcma_host_pci_remove(struct 
+@@ -235,7 +241,6 @@ static void bcma_host_pci_remove(struct
        pci_release_regions(dev);
        pci_disable_device(dev);
        kfree(bus);
  }
  
  #ifdef CONFIG_PM_SLEEP
-@@ -267,15 +272,20 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
+@@ -267,15 +272,21 @@ static SIMPLE_DEV_PM_OPS(bcma_pm_ops, bc
  
  #endif /* CONFIG_PM_SLEEP */
  
 -static DEFINE_PCI_DEVICE_TABLE(bcma_pci_bridge_tbl) = {
 +static const struct pci_device_id bcma_pci_bridge_tbl[] = {
        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x0576) },
+-      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
 +      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4313) },
-       { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },
++      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43224) },  /* 0xa8d8 */
        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4331) },
        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4353) },
        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4357) },
 +      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43a9) },
 +      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x43aa) },
        { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4727) },
-+      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },  /* 0xA8DB */
++      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43227) },  /* 0xa8db, BCM43217 (sic!) */
++      { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 43228) },  /* 0xa8dc */
        { 0, },
  };
  MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
  #include <linux/platform_device.h>
  #include <linux/bcma/bcma.h>
  #include <linux/slab.h>
 +#include <linux/of_address.h>
++#include <linux/of_irq.h>
  
  MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
  MODULE_LICENSE("GPL");
-@@ -69,28 +70,36 @@ static u16 bcma_cc_core_id(struct bcma_b
+@@ -69,28 +71,36 @@ static u16 bcma_cc_core_id(struct bcma_b
        return BCMA_CORE_CHIPCOMMON;
  }
  
  }
  
  static void bcma_release_core_dev(struct device *dev)
-@@ -103,55 +112,121 @@ static void bcma_release_core_dev(struct
+@@ -103,55 +113,195 @@ static void bcma_release_core_dev(struct
        kfree(core);
  }
  
 +      return false;
 +}
 +
-+#ifdef CONFIG_OF
++#if defined(CONFIG_OF) && defined(CONFIG_OF_ADDRESS)
 +static struct device_node *bcma_of_find_child_device(struct platform_device *parent,
 +                                                   struct bcma_device *core)
 +{
 +      return NULL;
 +}
 +
++static int bcma_of_irq_parse(struct platform_device *parent,
++                           struct bcma_device *core,
++                           struct of_phandle_args *out_irq, int num)
++{
++      __be32 laddr[1];
++      int rc;
++
++      if (core->dev.of_node) {
++              rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++              if (!rc)
++                      return rc;
++      }
++
++      out_irq->np = parent->dev.of_node;
++      out_irq->args_count = 1;
++      out_irq->args[0] = num;
++
++      laddr[0] = cpu_to_be32(core->addr);
++      return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                  struct bcma_device *core, int num)
++{
++      struct of_phandle_args out_irq;
++      int ret;
++
++      if (!parent || !parent->dev.of_node)
++              return 0;
++
++      ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++      if (ret) {
++              bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++                         ret);
++              return 0;
++      }
++
++      return irq_create_of_mapping(&out_irq);
++}
++
 +static void bcma_of_fill_device(struct platform_device *parent,
 +                              struct bcma_device *core)
 +{
 +      node = bcma_of_find_child_device(parent, core);
 +      if (node)
 +              core->dev.of_node = node;
++
++      core->irq = bcma_of_get_irq(parent, core, 0);
 +}
 +#else
 +static void bcma_of_fill_device(struct platform_device *parent,
 +                              struct bcma_device *core)
 +{
 +}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                         struct bcma_device *core, int num)
++{
++      return 0;
++}
 +#endif /* CONFIG_OF */
 +
-+static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
 +{
-+      int err;
++      struct bcma_bus *bus = core->bus;
++      unsigned int mips_irq;
++
++      switch (bus->hosttype) {
++      case BCMA_HOSTTYPE_PCI:
++              return bus->host_pci->irq;
++      case BCMA_HOSTTYPE_SOC:
++              if (bus->drv_mips.core && num == 0) {
++                      mips_irq = bcma_core_mips_irq(core);
++                      return mips_irq <= 4 ? mips_irq + 2 : 0;
++              }
++              if (bus->host_pdev)
++                      return bcma_of_get_irq(bus->host_pdev, core, num);
++              return 0;
++      case BCMA_HOSTTYPE_SDIO:
++              return 0;
++      }
 +
++      return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
 +      core->dev.release = bcma_release_core_dev;
 +      core->dev.bus = &bcma_bus_type;
 +      dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
 +      case BCMA_HOSTTYPE_SDIO:
 +              break;
 +      }
++}
++
++static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
++{
++      int err;
 +
 +      err = device_register(&core->dev);
 +      if (err) {
        }
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -218,7 +293,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -218,7 +368,7 @@ int bcma_bus_register(struct bcma_bus *b
        err = bcma_bus_scan(bus);
        if (err) {
                bcma_err(bus, "Failed to scan: %d\n", err);
        }
  
        /* Early init CC core */
-@@ -228,6 +303,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -228,6 +378,12 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_chipcommon_early_init(&bus->drv_cc);
        }
  
        /* Try to get SPROM */
        err = bcma_sprom_get(bus);
        if (err == -ENOENT) {
-@@ -242,6 +323,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -242,6 +398,13 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_chipcommon_init(&bus->drv_cc);
        }
  
        /* Init MIPS core */
        core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
        if (core) {
-@@ -263,6 +351,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -263,6 +426,13 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_pci_init(&bus->drv_pci[1]);
        }
  
        /* Init GBIT MAC COMMON core */
        core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
        if (core) {
-@@ -271,7 +366,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -271,7 +441,7 @@ int bcma_bus_register(struct bcma_bus *b
        }
  
        /* Register found cores */
  
        bcma_info(bus, "Bus registered\n");
  
-@@ -289,6 +384,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -289,6 +459,8 @@ void bcma_bus_unregister(struct bcma_bus
        else if (err)
                bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
  
        cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
        cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
        cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -308,8 +405,6 @@ int __init bcma_bus_early_register(struc
+@@ -308,8 +480,6 @@ int __init bcma_bus_early_register(struc
        struct bcma_device *core;
        struct bcma_device_id match;
  
        match.manuf = BCMA_MANUF_BCM;
        match.id = bcma_cc_core_id(bus);
        match.class = BCMA_CL_SIM;
-@@ -468,6 +563,11 @@ static int __init bcma_modinit(void)
+@@ -468,6 +638,11 @@ static int __init bcma_modinit(void)
        if (err)
                return err;
  
  #ifdef CONFIG_BCMA_HOST_PCI
        err = bcma_host_pci_init();
        if (err) {
-@@ -485,6 +585,7 @@ static void __exit bcma_modexit(void)
+@@ -485,6 +660,7 @@ static void __exit bcma_modexit(void)
  #ifdef CONFIG_BCMA_HOST_PCI
        bcma_host_pci_exit();
  #endif
  module_exit(bcma_modexit)
 --- a/drivers/bcma/scan.c
 +++ b/drivers/bcma/scan.c
-@@ -32,6 +32,18 @@ static const struct bcma_device_id_name 
+@@ -32,6 +32,18 @@ static const struct bcma_device_id_name
        { BCMA_CORE_4706_CHIPCOMMON, "BCM4706 ChipCommon" },
        { BCMA_CORE_4706_SOC_RAM, "BCM4706 SOC RAM" },
        { BCMA_CORE_4706_MAC_GBIT, "BCM4706 GBit MAC" },
        erombase = bcma_scan_read32(bus, 0, BCMA_CC_EROM);
        if (bus->hosttype == BCMA_HOSTTYPE_SOC) {
                eromptr = ioremap_nocache(erombase, BCMA_CORE_SIZE);
+@@ -489,6 +505,7 @@ int bcma_bus_scan(struct bcma_bus *bus)
+               bus->nr_cores++;
+               other_core = bcma_find_core_reverse(bus, core->id.id);
+               core->core_unit = (other_core == NULL) ? 0 : other_core->core_unit + 1;
++              bcma_prepare_core(bus, core);
+               bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
+                         core->core_index, bcma_device_name(&core->id),
 --- a/drivers/bcma/sprom.c
 +++ b/drivers/bcma/sprom.c
 @@ -72,12 +72,12 @@ fail:
  extern bool bcma_core_is_enabled(struct bcma_device *core);
  extern void bcma_core_disable(struct bcma_device *core, u32 flags);
  extern int bcma_core_enable(struct bcma_device *core, u32 flags);
+@@ -415,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT       0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
 --- a/include/linux/bcma/bcma_driver_chipcommon.h
 +++ b/include/linux/bcma/bcma_driver_chipcommon.h
 @@ -330,6 +330,8 @@
 +void bcma_chipco_b_mii_write(struct bcma_drv_cc_b *ccb, u32 offset, u32 value);
 +
  #endif /* LINUX_BCMA_DRIVER_CC_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       return 0;
+ }
 --- a/include/linux/bcma/bcma_driver_pci.h
 +++ b/include/linux/bcma/bcma_driver_pci.h
 @@ -181,10 +181,31 @@ struct pci_dev;
  static const char * const part_probes[] = { "bcm47xxpart", NULL };
  
  static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips 
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       struct bcma_device *mdev = dev->bus->drv_mips.core;
+       u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+       return 5;
+ }
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-      unsigned int mips_irq = bcma_core_mips_irq(dev);
+-      return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+       unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
  }
  EXPORT_SYMBOL(bcma_cpu_clock);
  
  
        switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
        case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
                        bcma_nflash_init(cc);
                }
        }
  }
  
  void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+               break;
+       default:
+               list_for_each_entry(core, &bus->cores, list) {
+-                      core->irq = bcma_core_irq(core);
++                      core->irq = bcma_core_irq(core, 0);
+               }
+               bcma_err(bus,
+                        "Unknown device (0x%x) found, can not configure IRQs\n",
 --- a/drivers/bcma/host_soc.c
 +++ b/drivers/bcma/host_soc.c
 @@ -7,6 +7,9 @@
        bcm47xx_fill_bcma_boardinfo(&bcm47xx_bus.bcma.bus.boardinfo, NULL);
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
 +Driver for ARM AXI Bus with Broadcom Plugins (bcma)
 +
 +Required properties:
 +
 +The cores on the AXI bus are automatically detected by bcma with the
 +memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
 +
 +The top-level axi bus may contain children representing attached cores
 +(devices). This is needed since some hardware details can't be auto
 +              ranges = <0x00000000 0x18000000 0x00100000>;
 +              #address-cells = <1>;
 +              #size-cells = <1>;
++              #interrupt-cells = <1>;
++              interrupt-map-mask = <0x000fffff 0xffff>;
++              interrupt-map =
++                      /* Ethernet Controller 0 */
++                      <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 1 */
++                      <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++                      /* PCIe Controller 0 */
++                      <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 +
 +              chipcommon {
 +                      reg = <0x00000000 0x1000>;
index 8367b69fb66782c37139809d318c712e9f2217a9..e1fd275af0013bf46ca581160b331e9626b02ecf 100644 (file)
@@ -8,6 +8,18 @@
        { 0, },
  };
  MODULE_DEVICE_TABLE(pci, b43_pci_bridge_tbl);
+--- a/drivers/ssb/driver_gpio.c
++++ b/drivers/ssb/driver_gpio.c
+@@ -475,7 +475,8 @@ int ssb_gpio_unregister(struct ssb_bus *
+ {
+       if (ssb_chipco_available(&bus->chipco) ||
+           ssb_extif_available(&bus->extif)) {
+-              return gpiochip_remove(&bus->gpio);
++              gpiochip_remove(&bus->gpio);
++              return 0;
+       } else {
+               SSB_WARN_ON(1);
+       }
 --- a/drivers/ssb/pci.c
 +++ b/drivers/ssb/pci.c
 @@ -326,13 +326,13 @@ err_ctlreg:
  
        /* Extract cores power info info */
        for (i = 0; i < ARRAY_SIZE(pwr_info_offset); i++) {
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
+       struct ssb_bus *ssb = pci_get_drvdata(dev);
+       int err;
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+               return err;
+       pci_save_state(dev);
+       pci_disable_device(dev);
+-      pci_set_power_state(dev, pci_choose_state(dev, state));
++
++      /* if there is a wakeup enabled child device on ssb bus,
++         enable pci wakeup posibility. */
++      device_set_wakeup_enable(d, d->power.wakeup_path);
++
++      pci_prepare_to_sleep(dev);
+       return 0;
+ }
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
+       struct ssb_bus *ssb = pci_get_drvdata(dev);
+       int err;
+-      pci_set_power_state(dev, PCI_D0);
++      pci_back_from_sleep(dev);
+       err = pci_enable_device(dev);
+       if (err)
+               return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+       return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend  NULL
+-# define ssb_pcihost_resume   NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++      SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+                            const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+       driver->probe = ssb_pcihost_probe;
+       driver->remove = ssb_pcihost_remove;
+-      driver->suspend = ssb_pcihost_suspend;
+-      driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++      driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+       return pci_register_driver(driver);
+ }
 --- a/include/linux/ssb/ssb.h
 +++ b/include/linux/ssb/ssb.h
 @@ -33,6 +33,7 @@ struct ssb_sprom {
index a27cc8545eff5e2d77a3a7b9d0af2f2fd980ba75..2791ce1bb6d22860ad7ebe2865cb8af2570f2078 100644 (file)
  bcma-$(CONFIG_BCMA_DRIVER_PCI_HOSTMODE)       += driver_pci_host.o
  bcma-$(CONFIG_BCMA_DRIVER_MIPS)               += driver_mips.o
  bcma-$(CONFIG_BCMA_DRIVER_GMAC_CMN)   += driver_gmac_cmn.o
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+               return;
+       }
+-      irq = bcma_core_irq(cc->core);
++      irq = bcma_core_irq(cc->core, 0);
+       /* Determine the registers of the UARTs */
+       cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
 --- a/drivers/bcma/driver_chipcommon_pmu.c
 +++ b/drivers/bcma/driver_chipcommon_pmu.c
 @@ -603,6 +603,8 @@ void bcma_pmu_spuravoid_pllupdate(struct
  static int bcma_gpio_to_irq(struct gpio_chip *chip, unsigned gpio)
  {
        struct bcma_drv_cc *cc = bcma_gpio_get_cc(chip);
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+                                        handle_simple_irq);
+       }
+-      hwirq = bcma_core_irq(cc->core);
++      hwirq = bcma_core_irq(cc->core, 0);
+       err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+                         cc);
+       if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+               return;
+       bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+-      free_irq(bcma_core_irq(cc->core), cc);
++      free_irq(bcma_core_irq(cc->core, 0), cc);
+       for (gpio = 0; gpio < chip->ngpio; gpio++) {
+               int irq = irq_find_mapping(cc->irq_domain, gpio);
 @@ -215,10 +215,22 @@ int bcma_gpio_init(struct bcma_drv_cc *c
        chip->set               = bcma_gpio_set_value;
        chip->direction_input   = bcma_gpio_direction_input;
        /* There is just one SoC in one device and its GPIO addresses should be
         * deterministic to address them more easily. The other buses could get
         * a random base number. */
+@@ -243,5 +255,6 @@ int bcma_gpio_init(struct bcma_drv_cc *c
+ int bcma_gpio_unregister(struct bcma_drv_cc *cc)
+ {
+       bcma_gpio_irq_domain_exit(cc);
+-      return gpiochip_remove(&cc->gpio);
++      gpiochip_remove(&cc->gpio);
++      return 0;
+ }
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+       pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+       /* Fix up interrupt lines */
+-      dev->irq = bcma_core_irq(pc_host->pdev->core);
++      dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+       readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+       pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+                              pci_ops);
+-      return bcma_core_irq(pc_host->pdev->core);
++      return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- /dev/null
 +++ b/drivers/bcma/driver_pcie2.c
 @@ -0,0 +1,175 @@
  MODULE_DEVICE_TABLE(pci, bcma_pci_bridge_tbl);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -10,6 +10,7 @@
+@@ -10,6 +10,8 @@
  #include <linux/platform_device.h>
  #include <linux/bcma/bcma.h>
  #include <linux/slab.h>
 +#include <linux/of_address.h>
++#include <linux/of_irq.h>
  
  MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
  MODULE_LICENSE("GPL");
-@@ -120,56 +121,124 @@ static void bcma_release_core_dev(struct
+@@ -120,56 +122,195 @@ static void bcma_release_core_dev(struct
        kfree(core);
  }
  
 +      return NULL;
 +}
 +
++static int bcma_of_irq_parse(struct platform_device *parent,
++                           struct bcma_device *core,
++                           struct of_phandle_args *out_irq, int num)
++{
++      __be32 laddr[1];
++      int rc;
++
++      if (core->dev.of_node) {
++              rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++              if (!rc)
++                      return rc;
++      }
++
++      out_irq->np = parent->dev.of_node;
++      out_irq->args_count = 1;
++      out_irq->args[0] = num;
++
++      laddr[0] = cpu_to_be32(core->addr);
++      return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                  struct bcma_device *core, int num)
++{
++      struct of_phandle_args out_irq;
++      int ret;
++
++      if (!parent || !parent->dev.of_node)
++              return 0;
++
++      ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++      if (ret) {
++              bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++                         ret);
++              return 0;
++      }
++
++      return irq_create_of_mapping(&out_irq);
++}
++
 +static void bcma_of_fill_device(struct platform_device *parent,
 +                              struct bcma_device *core)
 +{
 +      node = bcma_of_find_child_device(parent, core);
 +      if (node)
 +              core->dev.of_node = node;
++
++      core->irq = bcma_of_get_irq(parent, core, 0);
 +}
 +#else
 +static void bcma_of_fill_device(struct platform_device *parent,
 +                              struct bcma_device *core)
 +{
 +}
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                         struct bcma_device *core, int num)
++{
++      return 0;
++}
 +#endif /* CONFIG_OF */
 +
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
++{
++      struct bcma_bus *bus = core->bus;
++      unsigned int mips_irq;
++
++      switch (bus->hosttype) {
++      case BCMA_HOSTTYPE_PCI:
++              return bus->host_pci->irq;
++      case BCMA_HOSTTYPE_SOC:
++              if (bus->drv_mips.core && num == 0) {
++                      mips_irq = bcma_core_mips_irq(core);
++                      return mips_irq <= 4 ? mips_irq + 2 : 0;
++              }
++              if (bus->host_pdev)
++                      return bcma_of_get_irq(bus->host_pdev, core, num);
++              return 0;
++      case BCMA_HOSTTYPE_SDIO:
++              return 0;
++      }
++
++      return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
 +void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
 +{
 +      core->dev.release = bcma_release_core_dev;
        }
  
  #ifdef CONFIG_BCMA_DRIVER_MIPS
-@@ -246,6 +315,12 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -246,6 +387,12 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_chipcommon_early_init(&bus->drv_cc);
        }
  
        /* Try to get SPROM */
        err = bcma_sprom_get(bus);
        if (err == -ENOENT) {
-@@ -260,6 +335,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -260,6 +407,13 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_chipcommon_init(&bus->drv_cc);
        }
  
        /* Init MIPS core */
        core = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
        if (core) {
-@@ -281,6 +363,13 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -281,6 +435,13 @@ int bcma_bus_register(struct bcma_bus *b
                bcma_core_pci_init(&bus->drv_pci[1]);
        }
  
        /* Init GBIT MAC COMMON core */
        core = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
        if (core) {
-@@ -289,7 +378,7 @@ int bcma_bus_register(struct bcma_bus *b
+@@ -289,7 +450,7 @@ int bcma_bus_register(struct bcma_bus *b
        }
  
        /* Register found cores */
  
        bcma_info(bus, "Bus registered\n");
  
-@@ -307,6 +396,8 @@ void bcma_bus_unregister(struct bcma_bus
+@@ -307,6 +468,8 @@ void bcma_bus_unregister(struct bcma_bus
        else if (err)
                bcma_err(bus, "Can not unregister GPIO driver: %i\n", err);
  
        cores[0] = bcma_find_core(bus, BCMA_CORE_MIPS_74K);
        cores[1] = bcma_find_core(bus, BCMA_CORE_PCIE);
        cores[2] = bcma_find_core(bus, BCMA_CORE_4706_MAC_GBIT_COMMON);
-@@ -326,8 +417,6 @@ int __init bcma_bus_early_register(struc
+@@ -326,8 +489,6 @@ int __init bcma_bus_early_register(struc
        struct bcma_device *core;
        struct bcma_device_id match;
  
        match.manuf = BCMA_MANUF_BCM;
        match.id = bcma_cc_core_id(bus);
        match.class = BCMA_CL_SIM;
-@@ -486,6 +575,11 @@ static int __init bcma_modinit(void)
+@@ -486,6 +647,11 @@ static int __init bcma_modinit(void)
        if (err)
                return err;
  
  #ifdef CONFIG_BCMA_HOST_PCI
        err = bcma_host_pci_init();
        if (err) {
-@@ -503,6 +597,7 @@ static void __exit bcma_modexit(void)
+@@ -503,6 +669,7 @@ static void __exit bcma_modexit(void)
  #ifdef CONFIG_BCMA_HOST_PCI
        bcma_host_pci_exit();
  #endif
        struct bcma_drv_mips drv_mips;
        struct bcma_drv_gmac_cmn drv_gmac_cmn;
  
+@@ -440,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT       0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       return 0;
+ }
 --- /dev/null
 +++ b/include/linux/bcma/bcma_driver_pcie2.h
 @@ -0,0 +1,158 @@
  static const char * const part_probes[] = { "bcm47xxpart", NULL };
  
  static struct physmap_flash_data bcma_pflash_data = {
-@@ -229,11 +237,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
+@@ -107,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       struct bcma_device *mdev = dev->bus->drv_mips.core;
+       u32 irqflag;
+@@ -125,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+       return 5;
+ }
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-      unsigned int mips_irq = bcma_core_mips_irq(dev);
+-      return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+       unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -229,11 +230,51 @@ u32 bcma_cpu_clock(struct bcma_drv_mips
  }
  EXPORT_SYMBOL(bcma_cpu_clock);
  
  
        switch (cc->capabilities & BCMA_CC_CAP_FLASHT) {
        case BCMA_CC_FLASHT_STSER:
-@@ -269,6 +317,20 @@ static void bcma_core_mips_flash_detect(
+@@ -269,6 +310,20 @@ static void bcma_core_mips_flash_detect(
                        bcma_nflash_init(cc);
                }
        }
  }
  
  void bcma_core_mips_early_init(struct bcma_drv_mips *mcore)
+@@ -361,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+               break;
+       default:
+               list_for_each_entry(core, &bus->cores, list) {
+-                      core->irq = bcma_core_irq(core);
++                      core->irq = bcma_core_irq(core, 0);
+               }
+               bcma_err(bus,
+                        "Unknown device (0x%x) found, can not configure IRQs\n",
 --- a/include/linux/bcma/bcma_regs.h
 +++ b/include/linux/bcma/bcma_regs.h
 @@ -39,6 +39,11 @@
  
 --- /dev/null
 +++ b/Documentation/devicetree/bindings/bus/bcma.txt
-@@ -0,0 +1,32 @@
+@@ -0,0 +1,53 @@
 +Driver for ARM AXI Bus with Broadcom Plugins (bcma)
 +
 +Required properties:
 +
 +The cores on the AXI bus are automatically detected by bcma with the
 +memory ranges they are using and they get registered afterwards.
++Automatic detection of the IRQ number is not working on
++BCM47xx/BCM53xx ARM SoCs. To assign IRQ numbers to the cores, provide
++them manually through device tree. Use an interrupt-map to specify the
++IRQ used by the devices on the bus. The first address is just an index,
++because we do not have any special register.
 +
 +The top-level axi bus may contain children representing attached cores
 +(devices). This is needed since some hardware details can't be auto
 +              ranges = <0x00000000 0x18000000 0x00100000>;
 +              #address-cells = <1>;
 +              #size-cells = <1>;
++              #interrupt-cells = <1>;
++              interrupt-map-mask = <0x000fffff 0xffff>;
++              interrupt-map =
++                      /* Ethernet Controller 0 */
++                      <0x00024000 0 &gic GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
++
++                      /* Ethernet Controller 1 */
++                      <0x00025000 0 &gic GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
++
++                      /* PCIe Controller 0 */
++                      <0x00012000 0 &gic GIC_SPI 126 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 1 &gic GIC_SPI 127 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 2 &gic GIC_SPI 128 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 3 &gic GIC_SPI 129 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 4 &gic GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>,
++                      <0x00012000 5 &gic GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
 +
 +              chipcommon {
 +                      reg = <0x00000000 0x1000>;
index f97a442cb13f880365243e89948143e343024c90..67600ae972189f7abe3ece5bec91a1bb30f2d968 100644 (file)
@@ -11,7 +11,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
 
 --- a/drivers/mtd/ubi/build.c
 +++ b/drivers/mtd/ubi/build.c
-@@ -1209,6 +1209,48 @@
+@@ -1209,6 +1209,48 @@ static struct mtd_info * __init open_mtd
        return mtd;
  }
  
@@ -60,7 +60,7 @@ Signed-off-by: Daniel Golle <daniel@makrotopia.org>
  static int __init ubi_init(void)
  {
        int err, i, k;
-@@ -1298,6 +1340,12 @@
+@@ -1298,6 +1340,12 @@ static int __init ubi_init(void)
                }
        }
  
diff --git a/target/linux/generic/patches-3.18/020-ssb_update.patch b/target/linux/generic/patches-3.18/020-ssb_update.patch
new file mode 100644 (file)
index 0000000..9171b24
--- /dev/null
@@ -0,0 +1,78 @@
+--- a/drivers/ssb/pcihost_wrapper.c
++++ b/drivers/ssb/pcihost_wrapper.c
+@@ -11,15 +11,17 @@
+  * Licensed under the GNU/GPL. See COPYING for details.
+  */
++#include <linux/pm.h>
+ #include <linux/pci.h>
+ #include <linux/export.h>
+ #include <linux/slab.h>
+ #include <linux/ssb/ssb.h>
+-#ifdef CONFIG_PM
+-static int ssb_pcihost_suspend(struct pci_dev *dev, pm_message_t state)
++#ifdef CONFIG_PM_SLEEP
++static int ssb_pcihost_suspend(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
+       struct ssb_bus *ssb = pci_get_drvdata(dev);
+       int err;
+@@ -28,17 +30,23 @@ static int ssb_pcihost_suspend(struct pc
+               return err;
+       pci_save_state(dev);
+       pci_disable_device(dev);
+-      pci_set_power_state(dev, pci_choose_state(dev, state));
++
++      /* if there is a wakeup enabled child device on ssb bus,
++         enable pci wakeup posibility. */
++      device_set_wakeup_enable(d, d->power.wakeup_path);
++
++      pci_prepare_to_sleep(dev);
+       return 0;
+ }
+-static int ssb_pcihost_resume(struct pci_dev *dev)
++static int ssb_pcihost_resume(struct device *d)
+ {
++      struct pci_dev *dev = to_pci_dev(d);
+       struct ssb_bus *ssb = pci_get_drvdata(dev);
+       int err;
+-      pci_set_power_state(dev, PCI_D0);
++      pci_back_from_sleep(dev);
+       err = pci_enable_device(dev);
+       if (err)
+               return err;
+@@ -49,10 +57,12 @@ static int ssb_pcihost_resume(struct pci
+       return 0;
+ }
+-#else /* CONFIG_PM */
+-# define ssb_pcihost_suspend  NULL
+-# define ssb_pcihost_resume   NULL
+-#endif /* CONFIG_PM */
++
++static const struct dev_pm_ops ssb_pcihost_pm_ops = {
++      SET_SYSTEM_SLEEP_PM_OPS(ssb_pcihost_suspend, ssb_pcihost_resume)
++};
++
++#endif /* CONFIG_PM_SLEEP */
+ static int ssb_pcihost_probe(struct pci_dev *dev,
+                            const struct pci_device_id *id)
+@@ -115,8 +125,9 @@ int ssb_pcihost_register(struct pci_driv
+ {
+       driver->probe = ssb_pcihost_probe;
+       driver->remove = ssb_pcihost_remove;
+-      driver->suspend = ssb_pcihost_suspend;
+-      driver->resume = ssb_pcihost_resume;
++#ifdef CONFIG_PM_SLEEP
++      driver->driver.pm = &ssb_pcihost_pm_ops;
++#endif
+       return pci_register_driver(driver);
+ }
index 871791e87181af3a2e5091b79a26afe74fb3ba51..07ceb037b7e1539701f11902361c0c493fc97368 100644 (file)
  int bcma_bus_register(struct bcma_bus *bus);
  void bcma_bus_unregister(struct bcma_bus *bus);
  int __init bcma_bus_early_register(struct bcma_bus *bus,
+--- a/drivers/bcma/driver_chipcommon.c
++++ b/drivers/bcma/driver_chipcommon.c
+@@ -339,7 +339,7 @@ void bcma_chipco_serial_init(struct bcma
+               return;
+       }
+-      irq = bcma_core_irq(cc->core);
++      irq = bcma_core_irq(cc->core, 0);
+       /* Determine the registers of the UARTs */
+       cc->nr_serial_ports = (cc->capabilities & BCMA_CC_CAP_NRUART);
+--- a/drivers/bcma/driver_gpio.c
++++ b/drivers/bcma/driver_gpio.c
+@@ -152,7 +152,7 @@ static int bcma_gpio_irq_domain_init(str
+                                        handle_simple_irq);
+       }
+-      hwirq = bcma_core_irq(cc->core);
++      hwirq = bcma_core_irq(cc->core, 0);
+       err = request_irq(hwirq, bcma_gpio_irq_handler, IRQF_SHARED, "gpio",
+                         cc);
+       if (err)
+@@ -183,7 +183,7 @@ static void bcma_gpio_irq_domain_exit(st
+               return;
+       bcma_cc_mask32(cc, BCMA_CC_IRQMASK, ~BCMA_CC_IRQ_GPIO);
+-      free_irq(bcma_core_irq(cc->core), cc);
++      free_irq(bcma_core_irq(cc->core, 0), cc);
+       for (gpio = 0; gpio < chip->ngpio; gpio++) {
+               int irq = irq_find_mapping(cc->irq_domain, gpio);
+--- a/drivers/bcma/driver_mips.c
++++ b/drivers/bcma/driver_mips.c
+@@ -115,7 +115,7 @@ static u32 bcma_core_mips_irqflag(struct
+  * If disabled, 5 is returned.
+  * If not supported, 6 is returned.
+  */
+-static unsigned int bcma_core_mips_irq(struct bcma_device *dev)
++unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       struct bcma_device *mdev = dev->bus->drv_mips.core;
+       u32 irqflag;
+@@ -133,13 +133,6 @@ static unsigned int bcma_core_mips_irq(s
+       return 5;
+ }
+-unsigned int bcma_core_irq(struct bcma_device *dev)
+-{
+-      unsigned int mips_irq = bcma_core_mips_irq(dev);
+-      return mips_irq <= 4 ? mips_irq + 2 : 0;
+-}
+-EXPORT_SYMBOL(bcma_core_irq);
+-
+ static void bcma_core_mips_set_irq(struct bcma_device *dev, unsigned int irq)
+ {
+       unsigned int oldirq = bcma_core_mips_irq(dev);
+@@ -423,7 +416,7 @@ void bcma_core_mips_init(struct bcma_drv
+               break;
+       default:
+               list_for_each_entry(core, &bus->cores, list) {
+-                      core->irq = bcma_core_irq(core);
++                      core->irq = bcma_core_irq(core, 0);
+               }
+               bcma_err(bus,
+                        "Unknown device (0x%x) found, can not configure IRQs\n",
+--- a/drivers/bcma/driver_pci_host.c
++++ b/drivers/bcma/driver_pci_host.c
+@@ -593,7 +593,7 @@ int bcma_core_pci_plat_dev_init(struct p
+       pr_info("PCI: Fixing up device %s\n", pci_name(dev));
+       /* Fix up interrupt lines */
+-      dev->irq = bcma_core_irq(pc_host->pdev->core);
++      dev->irq = bcma_core_irq(pc_host->pdev->core, 0);
+       pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
+       readrq = pcie_get_readrq(dev);
+@@ -617,6 +617,6 @@ int bcma_core_pci_pcibios_map_irq(const
+       pc_host = container_of(dev->bus->ops, struct bcma_drv_pci_host,
+                              pci_ops);
+-      return bcma_core_irq(pc_host->pdev->core);
++      return bcma_core_irq(pc_host->pdev->core, 0);
+ }
+ EXPORT_SYMBOL(bcma_core_pci_pcibios_map_irq);
 --- a/drivers/bcma/main.c
 +++ b/drivers/bcma/main.c
-@@ -169,10 +169,8 @@ static void bcma_of_fill_device(struct p
+@@ -11,6 +11,7 @@
+ #include <linux/bcma/bcma.h>
+ #include <linux/slab.h>
+ #include <linux/of_address.h>
++#include <linux/of_irq.h>
+ MODULE_DESCRIPTION("Broadcom's specific AMBA driver");
+ MODULE_LICENSE("GPL");
+@@ -153,6 +154,46 @@ static struct device_node *bcma_of_find_
+       return NULL;
+ }
++static int bcma_of_irq_parse(struct platform_device *parent,
++                           struct bcma_device *core,
++                           struct of_phandle_args *out_irq, int num)
++{
++      __be32 laddr[1];
++      int rc;
++
++      if (core->dev.of_node) {
++              rc = of_irq_parse_one(core->dev.of_node, num, out_irq);
++              if (!rc)
++                      return rc;
++      }
++
++      out_irq->np = parent->dev.of_node;
++      out_irq->args_count = 1;
++      out_irq->args[0] = num;
++
++      laddr[0] = cpu_to_be32(core->addr);
++      return of_irq_parse_raw(laddr, out_irq);
++}
++
++static unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                  struct bcma_device *core, int num)
++{
++      struct of_phandle_args out_irq;
++      int ret;
++
++      if (!parent || !parent->dev.of_node)
++              return 0;
++
++      ret = bcma_of_irq_parse(parent, core, &out_irq, num);
++      if (ret) {
++              bcma_debug(core->bus, "bcma_of_get_irq() failed with rc=%d\n",
++                         ret);
++              return 0;
++      }
++
++      return irq_create_of_mapping(&out_irq);
++}
++
+ static void bcma_of_fill_device(struct platform_device *parent,
+                               struct bcma_device *core)
+ {
+@@ -161,18 +202,47 @@ static void bcma_of_fill_device(struct p
+       node = bcma_of_find_child_device(parent, core);
+       if (node)
+               core->dev.of_node = node;
++
++      core->irq = bcma_of_get_irq(parent, core, 0);
+ }
+ #else
+ static void bcma_of_fill_device(struct platform_device *parent,
+                               struct bcma_device *core)
+ {
  }
++static inline unsigned int bcma_of_get_irq(struct platform_device *parent,
++                                         struct bcma_device *core, int num)
++{
++      return 0;
++}
  #endif /* CONFIG_OF */
  
 -static void bcma_register_core(struct bcma_bus *bus, struct bcma_device *core)
-+void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++unsigned int bcma_core_irq(struct bcma_device *core, int num)
  {
 -      int err;
--
++      struct bcma_bus *bus = core->bus;
++      unsigned int mips_irq;
++
++      switch (bus->hosttype) {
++      case BCMA_HOSTTYPE_PCI:
++              return bus->host_pci->irq;
++      case BCMA_HOSTTYPE_SOC:
++              if (bus->drv_mips.core && num == 0) {
++                      mips_irq = bcma_core_mips_irq(core);
++                      return mips_irq <= 4 ? mips_irq + 2 : 0;
++              }
++              if (bus->host_pdev)
++                      return bcma_of_get_irq(bus->host_pdev, core, num);
++              return 0;
++      case BCMA_HOSTTYPE_SDIO:
++              return 0;
++      }
++      return 0;
++}
++EXPORT_SYMBOL(bcma_core_irq);
++
++void bcma_prepare_core(struct bcma_bus *bus, struct bcma_device *core)
++{
        core->dev.release = bcma_release_core_dev;
        core->dev.bus = &bcma_bus_type;
        dev_set_name(&core->dev, "bcma%d:%d", bus->num, core->core_index);
-@@ -196,6 +194,11 @@ static void bcma_register_core(struct bc
+@@ -196,6 +266,11 @@ static void bcma_register_core(struct bc
        case BCMA_HOSTTYPE_SDIO:
                break;
        }
  
                bcma_info(bus, "Core %d found: %s (manuf 0x%03X, id 0x%03X, rev 0x%02X, class 0x%X)\n",
                          core->core_index, bcma_device_name(&core->id),
+--- a/include/linux/bcma/bcma.h
++++ b/include/linux/bcma/bcma.h
+@@ -447,4 +447,6 @@ extern u32 bcma_chipco_pll_read(struct b
+ #define  BCMA_DMA_TRANSLATION_DMA64_CMT       0x80000000 /* Client Mode Translation for 64-bit DMA */
+ extern u32 bcma_core_dma_translation(struct bcma_device *core);
++extern unsigned int bcma_core_irq(struct bcma_device *core, int num);
++
+ #endif /* LINUX_BCMA_H_ */
+--- a/include/linux/bcma/bcma_driver_mips.h
++++ b/include/linux/bcma/bcma_driver_mips.h
+@@ -43,12 +43,12 @@ struct bcma_drv_mips {
+ extern void bcma_core_mips_init(struct bcma_drv_mips *mcore);
+ extern void bcma_core_mips_early_init(struct bcma_drv_mips *mcore);
+-extern unsigned int bcma_core_irq(struct bcma_device *core);
++extern unsigned int bcma_core_mips_irq(struct bcma_device *dev);
+ #else
+ static inline void bcma_core_mips_init(struct bcma_drv_mips *mcore) { }
+ static inline void bcma_core_mips_early_init(struct bcma_drv_mips *mcore) { }
+-static inline unsigned int bcma_core_irq(struct bcma_device *core)
++static inline unsigned int bcma_core_mips_irq(struct bcma_device *dev)
+ {
+       return 0;
+ }