target/linux/ath79/dts/qca9558_domywifi_dw33d.dts

   1 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
   2 /dts-v1/;
   3
   4 #include <dt-bindings/gpio/gpio.h>
   5 #include <dt-bindings/input/input.h>
   6
   7 #include "qca955x.dtsi"
   8
   9 / {
  10         compatible = "domywifi,dw33d", "qca,qca9558";
  11         model = "DomyWifi DW33D";
  12
  13         chosen {
  14                 bootargs = "console=ttyS0,115200n8";
  15         };
  16
  17         aliases {
  18                 led-boot = &led_system;
  19                 led-failsafe = &led_system;
  20                 led-running = &led_system;
  21                 led-upgrade = &led_system;
  22         };
  23
  24         leds {
  25                 compatible = "gpio-leds";
  26
  27                 led_system: system {
  28                         label = "dw33d:blue:system";
  29                         gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
  30                 };
  31
  32                 mmc {
  33                         label = "dw33d:blue:mmc";
  34                         gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
  35                         trigger-sources = <&hub_port0>;
  36                         linux,default-trigger = "usbport";
  37                 };
  38
  39                 usb {
  40                         label = "dw33d:blue:usb";
  41                         gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
  42                         trigger-sources = <&hub_port1>;
  43                         linux,default-trigger = "usbport";
  44                 };
  45
  46                 wlan2g {
  47                         label = "dw33d:blue:wlan2g";
  48                         gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
  49                         linux,default-trigger = "phy1tpt";
  50                 };
  51
  52                 internet {
  53                         label = "dw33d:blue:internet";
  54                         gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
  55                 };
  56         };
  57
  58         keys {
  59                 compatible = "gpio-keys";
  60
  61                 reset {
  62                         label = "Reset button";
  63                         linux,code = <KEY_RESTART>;
  64                         gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
  65                         debounce-interval = <60>;
  66                 };
  67         };
  68 };
  69
  70 &pcie0 {
  71         status = "okay";
  72
  73         wifi@0,0 {
  74                 compatible = "qcom,ath10k";
  75                 reg = <0 0 0 0 0>;
  76         };
  77 };
  78
  79 &uart {
  80         status = "okay";
  81 };
  82
  83 &usb_phy0 {
  84         status = "okay";
  85 };
  86
  87 &usb0 {
  88         #address-cells = <1>;
  89         #size-cells = <0>;
  90         status = "okay";
  91
  92         hub_port0: port@1 {
  93                 reg = <1>;
  94                 #trigger-source-cells = <0>;
  95         };
  96 };
  97
  98 &usb_phy1 {
  99         status = "okay";
 100 };
 101
 102 &usb1 {
 103         #address-cells = <1>;
 104         #size-cells = <0>;
 105         status = "okay";
 106
 107         hub_port1: port@1 {
 108                 reg = <1>;
 109                 #trigger-source-cells = <0>;
 110         };
 111 };
 112
 113 &spi {
 114         status = "okay";
 115
 116         num-cs = <1>;
 117
 118         flash@0 {
 119                 compatible = "jedec,spi-nor";
 120                 reg = <0>;
 121                 spi-max-frequency = <25000000>;
 122
 123                 partitions {
 124                         compatible = "fixed-partitions";
 125                         #address-cells = <1>;
 126                         #size-cells = <1>;
 127
 128                         partition@0 {
 129                                 label = "u-boot";
 130                                 reg = <0x0 0x40000>;
 131                                 read-only;
 132                         };
 133
 134                         partition@40000 {
 135                                 label = "u-boot-env";
 136                                 reg = <0x40000 0x10000>;
 137                         };
 138
 139                         partition@50000 {
 140                                 label = "oem-firmware";
 141                                 reg = <0x50000 0xfa0000>;
 142                         };
 143
 144                         art: partition@ff0000 {
 145                                 label = "art";
 146                                 reg = <0xff0000 0x10000>;
 147                                 read-only;
 148                         };
 149                 };
 150         };
 151 };
 152
 153 &nand {
 154         status = "okay";
 155
 156         partitions {
 157                 compatible = "fixed-partitions";
 158                 #address-cells = <1>;
 159                 #size-cells = <1>;
 160
 161                 partition@0 {
 162                         label = "kernel";
 163                         reg = <0x0 0x500000>;
 164                 };
 165
 166                 partition@500000 {
 167                         label = "ubi";
 168                         reg = <0x500000 0x5b00000>;
 169                 };
 170
 171                 partition@6000000 {
 172                         label = "oem-backup";
 173                         reg = <0x6000000 0x2000000>;
 174                 };
 175         };
 176 };
 177
 178 &mdio0 {
 179         status = "okay";
 180
 181         phy0: ethernet-phy@0 {
 182                 reg = <0>;
 183
 184                 qca,ar8327-initvals = <
 185                         0x04 0x87600000 /* PORT0 PAD MODE CTRL */
 186                         0x0c 0x00080080 /* PORT6 PAD MODE CTRL */
 187                         0x7c 0x0000007e /* PORT0_STATUS */
 188                         0x94 0x0000007e /* PORT6 STATUS */
 189                         >;
 190         };
 191 };
 192
 193 &eth0 {
 194         status = "okay";
 195
 196         mtd-mac-address = <&art 0x0>;
 197         pll-data = <0x56000000 0x00000101 0x00001616>;
 198         phy-handle = <&phy0>;
 199 };
 200
 201 &eth1 {
 202         status = "okay";
 203
 204         mtd-mac-address = <&art 0x6>;
 205         pll-data = <0x03000101 0x00000101 0x00001616>;
 206         fixed-link {
 207                 speed = <1000>;
 208                 full-duplex;
 209         };
 210 };
 211
 212 &wmac {
 213         status = "okay";
 214
 215         mtd-cal-data = <&art 0x1000>;
 216         mtd-mac-address = <&art 0xc>;
 217 };