// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-/dts-v1/;
-#include <dt-bindings/gpio/gpio.h>
-#include <dt-bindings/input/input.h>
-
-#include "ar7100.dtsi"
+#include "ar7161_buffalo_wzr-hp-ag300h.dtsi"
/ {
compatible = "buffalo,wzr-hp-ag300h", "qca,ar7161";
- model = "Buffalo WZR-HP-AG300H/WZR-600DHP";
-
- aliases {
- led-boot = &diag;
- led-failsafe = &diag;
- led-upgrade = &diag;
- };
-
- chosen {
- bootargs = "console=ttyS0,115200";
- };
-
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
- };
-
- gpio-leds {
- compatible = "gpio-leds";
-
- diag: diag {
- label = "buffalo:red:diag";
- gpios = <&gpio 1 GPIO_ACTIVE_LOW>;
- };
- };
-
- ath9k-leds {
- // those leds are indeed attached to the wifi chips
-
- compatible = "gpio-leds";
- band2g_a {
- label = "buffalo:amber:band2g";
- gpios = <&ath9k0 1 GPIO_ACTIVE_LOW>;
- };
-
- usb {
- label = "buffalo:green:usb";
- gpios = <&ath9k0 3 GPIO_ACTIVE_LOW>;
- trigger-sources = <&usb_ochi_port>, <&usb_echi_port>;
- linux,default-trigger = "usbport";
- };
-
- band2g_g {
- label = "buffalo:green:band2g";
- gpios = <&ath9k0 5 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy0tpt";
- };
-
- band5g_g {
- label = "buffalo:green:band5g";
- gpios = <&ath9k1 1 GPIO_ACTIVE_LOW>;
- linux,default-trigger = "phy1tpt";
- };
-
- router {
- label = "buffalo:green:router";
- gpios = <&ath9k1 3 GPIO_ACTIVE_LOW>;
- };
-
- movie_engine {
- label = "buffalo:blue:movie_engine";
- gpios = <&ath9k1 4 GPIO_ACTIVE_LOW>;
- };
-
- band5g_a {
- label = "buffalo:amber:band5g";
- gpios = <&ath9k1 5 GPIO_ACTIVE_LOW>;
- };
- };
-
- keys {
- compatible = "gpio-keys-polled";
- poll-interval = <20>;
-
- reset {
- linux,code = <KEY_RESTART>;
- gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- usb {
- linux,code = <BTN_2>;
- gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- aoss {
- linux,code = <KEY_WPS_BUTTON>;
- gpios = <&gpio 5 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- router_auto {
- linux,code = <BTN_6>;
- gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- router_off {
- linux,code = <BTN_5>;
- gpios = <&gpio 7 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
-
- movie_engine {
- linux,code = <BTN_7>;
- gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
- debounce-interval = <60>;
- };
- };
-
- gpio-export {
- compatible = "gpio-export";
-
- gpio_usb_power {
- gpio-export,name = "buffalo:power:usb";
- gpio-export,output = <1>;
- gpios = <&gpio 2 GPIO_ACTIVE_HIGH>;
- };
- };
-
- flash {
- compatible = "mtd-concat";
-
- devices = <&flash0 &flash1>;
-
- partitions {
- compatible = "fixed-partitions";
- #address-cells = <1>;
- #size-cells = <1>;
- partition@0 {
- label = "u-boot";
- reg = <0x0000000 0x0040000>;
- read-only;
- };
-
- partition@40000 {
- label = "u-boot-env";
- reg = <0x0040000 0x0010000>;
- read-only;
- };
-
- art: partition@50000 {
- label = "art";
- reg = <0x0050000 0x0010000>;
- read-only;
- };
-
- partition@60000 {
- compatible = "denx,uimage";
- label = "firmware";
- reg = <0x0060000 0x1f90000>;
- };
-
- partition@1ff0000 {
- label = "user_property";
- reg = <0x1ff0000 0x0010000>;
- read-only;
- };
- };
- };
-};
-
-&usb_phy {
- status = "okay";
-};
-
-&usb1 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_ochi_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&usb2 {
- #address-cells = <1>;
- #size-cells = <0>;
- status = "okay";
-
- usb_echi_port: port@1 {
- reg = <1>;
- #trigger-source-cells = <0>;
- };
-};
-
-&pcie0 {
- status = "okay";
-
- ath9k0: wifi@0,11 {
- compatible = "pci168c,0029";
- reg = <0x8800 0 0 0 0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-
- ath9k1: wifi@0,12 {
- compatible = "pci168c,0029";
- reg = <0x9000 0 0 0 0>;
- qca,no-eeprom;
- #gpio-cells = <2>;
- gpio-controller;
- };
-};
-
-&uart {
- status = "okay";
-};
-
-&pll {
- clocks = <&extosc>;
-};
-
-&spi {
- status = "okay";
- num-cs = <2>;
- cs-gpios = <0>, <0>;
-
- flash0: flash@0 {
- compatible = "jedec,spi-nor";
- reg = <0>;
- spi-max-frequency = <104000000>;
- m25p,fast-read;
- };
-
- flash1: flash@1 {
- compatible = "jedec,spi-nor";
- reg = <1>;
- spi-max-frequency = <104000000>;
- m25p,fast-read;
- };
-};
-
-&mdio0 {
- status = "okay";
-
- phy4: ethernet-phy@4 {
- reg = <4>;
- phy-mode = "rgmii";
- };
-};
-
-ð0 {
- status = "okay";
-
- mtd-mac-address = <&art 0x120c>;
-
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
-};
-
-ð1 {
- status = "okay";
-
- mtd-mac-address = <&art 0x520c>;
- mtd-mac-address-increment = <1>;
-
- phy-handle = <&phy4>;
+ model = "Buffalo WZR-HP-AG300H";
};
projects / openwrt / staging / wigyori.git / blobdiff