#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
+#include <dt-bindings/mtd/partitions/uimage.h>
/ {
model = "jjPlus JA76PF2";
led-upgrade = &led_d2;
};
- extosc: ref {
- compatible = "fixed-clock";
- #clock-cells = <0>;
- clock-output-names = "ref";
- clock-frequency = <40000000>;
+ i2c {
+ compatible = "i2c-gpio";
+ sda-gpios = <&gpio 1 GPIO_ACTIVE_HIGH>;
+ scl-gpios = <&gpio 0 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sensor@48 {
+ compatible = "microchip,tcn75";
+ reg = <0x48>;
+ };
};
leds {
ð0 {
status = "okay";
+ nvmem-cells = <&macaddr_lan>;
+ nvmem-cell-names = "mac-address";
phy-handle = <&phy0>;
};
ð1 {
status = "okay";
+ nvmem-cells = <&macaddr_wan>;
+ nvmem-cell-names = "mac-address";
phy-handle = <&phy4>;
};
spi-max-frequency = <25000000>;
partitions {
+ compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
- compatible = "ecoscentric,redboot-fis-partitions";
+
+ partition@0 {
+ label = "RedBoot";
+ reg = <0x000000 0x040000>;
+ read-only;
+ };
+
+ partition@40000 {
+ label = "loader";
+ reg = <0x040000 0x020000>;
+ };
+
+ partition@60000 {
+ label = "firmware";
+ reg = <0x060000 0xf80000>;
+ compatible = "openwrt,uimage", "denx,uimage";
+ openwrt,ih-magic = <IH_MAGIC_OKLI>;
+ };
+
+ partition@fe0000 {
+ label = "FIS directory";
+ reg = <0xfe0000 0x00f000>;
+ read-only;
+ };
+
+ partition@fef000 {
+ label = "RedBoot config";
+ reg = <0xfef000 0x001000>;
+ read-only;
+ };
+
+ partition@ff0000 {
+ label = "Atheros Board Data";
+ reg = <0xff0000 0x10000>;
+ read-only;
+
+ nvmem-layout {
+ compatible = "fixed-layout";
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ macaddr_wan: macaddr@1000 {
+ reg = <0x1000 0x6>;
+ };
+
+ macaddr_lan: macaddr@1006 {
+ reg = <0x1006 0x6>;
+ };
+ };
+ };
};
};
};