ath79: update WA/XC devices UBNT_VERSION to 8.7.4

[openwrt/staging/wigyori.git] / target / linux / ath79 / dts / ar9330.dtsi

diff --git a/target/linux/ath79/dts/ar9330.dtsi b/target/linux/ath79/dts/ar9330.dtsi
index f62367264ff1f17ba000f5d86761daf499aa02fb..466e0fb25dc5a1e42fa31831313b3cb9f785c190 100644 (file)
--- a/target/linux/ath79/dts/ar9330.dtsi
+++ b/target/linux/ath79/dts/ar9330.dtsi
@@ -1,5 +1,5 @@
 // SPDX-License-Identifier: GPL-2.0-or-later OR MIT
-#include <dt-bindings/clock/ath79-clk.h>
+
 #include "ath79.dtsi"
 
 / {
@@ -8,6 +8,10 @@
        #address-cells = <1>;
        #size-cells = <1>;
 
+       aliases {
+               serial0 = &uart;
+       };
+
        cpus {
                #address-cells = <1>;
                #size-cells = <0>;
@@ -24,6 +28,12 @@
                bootargs = "console=ttyATH0,115200";
        };
 
+       ref: ref {
+               compatible = "fixed-clock";
+               #clock-cells = <0>;
+               clock-output-names = "ref";
+       };
+
        ahb {
                apb {
                        ddr_ctrl: memory-controller@18000000 {
@@ -41,13 +51,11 @@
 
                                clocks = <&pll ATH79_CLK_REF>;
                                clock-names = "uart";
-
-                               status = "disabled";
                        };
 
                        gpio: gpio@18040000 {
                                compatible = "qca,ar7100-gpio";
-                               reg = <0x18040000 0x34>;
+                               reg = <0x18040000 0x28>;
                                interrupts = <2>;
 
                                ngpios = <30>;
@@ -57,15 +65,45 @@
 
                                interrupt-controller;
                                #interrupt-cells = <2>;
+                       };
+
+                       pinmux: pinmux@18040028 {
+                               compatible = "pinctrl-single";
+                               reg = <0x18040028 0x8>;
+
+                               pinctrl-single,bit-per-mux;
+                               pinctrl-single,register-width = <32>;
+                               pinctrl-single,function-mask = <0x1>;
+                               #pinctrl-cells = <2>;
 
-                               status = "disabled";
+                               jtag_disable_pins: pinmux_jtag_disable_pins {
+                                       pinctrl-single,bits = <0x0 0x1 0x1>;
+                               };
+
+                               switch_led_disable_pins: pinmux_switch_led_disable_pins {
+                                       pinctrl-single,bits = <0x0 0x0 0xf8>;
+                               };
                        };
 
                        pll: pll-controller@18050000 {
                                compatible = "qca,ar9330-pll";
                                reg = <0x18050000 0x100>;
 
+                               clocks = <&ref>;
+                               clock-names = "ref";
+
                                #clock-cells = <1>;
+                               clock-output-names = "cpu", "ddr", "ahb";
+                       };
+
+                       wdt: wdt@18060008 {
+                               compatible = "qca,ar7130-wdt";
+                               reg = <0x18060008 0x8>;
+
+                               interrupts = <4>;
+
+                               clocks = <&pll ATH79_CLK_AHB>;
+                               clock-names = "wdt";
                        };
 
                        rst: reset-controller@1806001c {
@@ -76,7 +114,7 @@
                        };
                };
 
-               usb: usb@1b000100 {
+               usb: usb@1b000000 {
                        compatible = "chipidea,usb2";
                        reg = <0x1b000000 0x200>;
 
@@ -88,14 +126,21 @@
                        phys = <&usb_phy>;
 
                        status = "disabled";
+
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       hub_port: port@1 {
+                               reg = <1>;
+                               #trigger-source-cells = <0>;
+                       };
                };
 
                spi: spi@1f000000 {
-                       compatible = "qca,ar7100-spi";
-                       reg = <0x1f000000 0x10>;
+                       compatible = "qca,ar934x-spi";
+                       reg = <0x1f000000 0x1c>;
 
                        clocks = <&pll ATH79_CLK_AHB>;
-                       clock-names = "ahb";
 
                        #address-cells = <1>;
                        #size-cells = <0>;
@@ -104,9 +149,18 @@
                };
 
                gmac: gmac@18070000 {
-                       compatible = "qca,qr9330-gmac";
+                       compatible = "qca,ar9330-gmac";
                        reg = <0x18070000 0x4>;
                };
+
+               wmac: wmac@18100000 {
+                       compatible = "qca,ar9330-wmac";
+                       reg = <0x18100000 0x20000>;
+
+                       interrupts = <2>;
+
+                       status = "disabled";
+               };
        };
 
        usb_phy: usb-phy {
@@ -133,20 +187,34 @@
 
        resets = <&rst 9>;
        reset-names = "mac";
-};
-
-&mdio0 {
-       regmap = <&eth1>;
-       builtin-switch;
-       resets = <&rst 23>;
-       reset-names = "mdio";
+       phy-handle = <&swphy4>;
 };
 
 &mdio1 {
+       status = "okay";
+       compatible = "qca,ar9330-mdio";
+
        resets = <&rst 23>;
        reset-names = "mdio";
-
        builtin-switch;
+
+       builtin_switch: switch0@1f {
+               compatible = "qca,ar7240sw";
+               reg = <0x1f>;
+               resets = <&rst 8>;
+               reset-names = "switch";
+               qca,mib-poll-interval = <500>;
+
+               mdio-bus {
+                       #address-cells = <1>;
+                       #size-cells = <0>;
+
+                       swphy4: ethernet-phy@4 {
+                               reg = <4>;
+                               phy-mode = "mii";
+                       };
+               };
+       };
 };
 
 &eth1 {
@@ -157,4 +225,9 @@
 
        resets = <&rst 13>;
        reset-names = "mac";
+
+       fixed-link {
+               speed = <1000>;
+               full-duplex;
+       };
 };